Instruction Manual
19"/22" LCD TV
Model 19WLM550DHID/22WLM550DHID
English Version
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
To prevent any injuries, the following safety precautions should be observed
in the installation, use, servicing and maintenance of this equipment.
Before operating this equipment, please read this manual completely,
and keep it nearby for future reference.
Do not place the equipment on any uneven or unstable carts,
stands, tables, shelves etc..
The equipment may fall, causing serious injuries to children or adults
and serious damage to the equipment itself.
Use only a cart or stand recommended by the manufacturer.
This equipment and recommended cart or stand should be handled
with care. Quick stops, excessive force, and uneven surfaces may
cause the equipment and recommended cart or stand to overturn.
Do not disable the 3-wire grounding type plug. The grounding pin
on the 3-prong plug is an important feature. Removing the grounding
pin will increase the risk of damaging the equipment.
If you can not fit the plug into the electrical outlet, contact an
electrician to install a grounding outlet.
Always operate this equipment from the type of power source
indicated on the rear of the serial/model plate.
Never overload wall outlets and extensions.
Use and handle the power cord with care.
Do not place any heavy objects on the AC power cord.
Do not pull the AC power cord. Do not handle the AC power cord
with a wet hand.
Do not touch the power cord and antenna cable during lightning.
When the equipment has not been used for a long period of time,
unplug it from the wall outlet.
Do not place, use or handle this equipment near water.
Never expose the equipment to liquid, rain, or moisture.
Seek for service if any of the above is spilled into the equipment.
Do not expose the equipment to extreme temperatures or
to direct sunlight, the equipment may overheat and can be damaged.
Do not install the equipment near any heat sources such as
radiators, heat registers, stoves, or any other apparatus
that might produce heat.
TV User Guide
2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Do not attempt to service the equipment yourself.
Opening and removing the covers may expose you to dangerous
voltage or any other hazards and may void your warranty.
Refer service from qualified personnel.
Do not place or drop any other objects on top.
Do not insert anything into the ventilation holes of your equipment.Inserting any
metal or flammable objects may result to fire or electric shock.
Do not place the equipment on uneven or unstable carts, stands,
tables, shelves etc..
The equipment may fall, causing serious injuries to children or adults
and serious damages to the equipment itself.
Always place the equipment on the floor or on a surface that
is sturdy, level, stable and strong enough to support
the weight of the equipment.
Do not block any ventilating openings, leave an open space around the equipment.
Never place the equipment :
on a bed, sofa, rug, or any other similar surfaces;
too close to drapes/curtains/walls, in a bookcase,
built-in cabinet, or any other similar places that may cause
poor ventilation.
Always remove the cord from the outlet before cleaning the equipment.
Never use cleaners, harsh or abrasive chemicals or solvents on the
equipment. Clean only with a dry, soft, lint-free cloth.
3
TV User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENT
PREPARATION .........................................................................................................................5
Features ............................................................................................................................................................5
Package Contents ..............................................................................................................................................6
TV ......................................................................................................................................................................7
Front View .........................................................................................................................................................7
Rear View .........................................................................................................................................................10
Remote Control ................................................................................................................................................11
USING THE FEATURES ...........................................................................................................13
Watching your TV .............................................................................................................................................13
Wide-Screen Mode ...........................................................................................................................................14
First Time Installation ........................................................................................................................................15
Picture ..............................................................................................................................................................16
Sound ...............................................................................................................................................................17
Setup ................................................................................................................................................................18
Timer ................................................................................................................................................................22
Function ........................................................................................................................................................... 22
DTV Channel List Options ................................................................................................................................24
DTV Setup ....................................................................................................................................................... 25
EPG ..................................................................................................................................................................27
DVD SETUP Menu......................................... .................................................................................................28
SPECIFICATION .......................................................................................................................30
GUARANTEE ...........................................................................................................................31
4
TV User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
Congratulations on the purchase of your new High Definition Compatible
Television. In order to maximize the potential of this television, you must use
it in conjunction with a High Definition Signal Source, utilizing a proper High
Definition receiving unit (of ten referred to as a "set-top" box).Only "true"
High Definition transmit ted video will yield optimum picture quality.
Please contact your cable or satellite provider for more information on
how to receive High Definition programming.
Features
Various Audio/Video terminals for external equipment connection
1 set of Composite video input terminal
1 set of S-VIDEO input terminal
1 set of HDMI input terminal
1 set of VGA input terminal
1 set of SCART terminal
Component Video Inputs
Offer the best video quality for DVD (480i/480p),and digital set-top-box
(HD1080i,720p) connections.
High-Definition Multimedia Interface (HDMI)
This interface can accommodate a copy-protected digital connection (HDCP) to other digital set-top
boxes that have compatible interface.
5
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Package Contents
Once you open the box, make sure all of the following contents are included.
If missing any items, please return this product to the original place
of purchase.
TV
Remote control/
AAA batteries
Power Cord
Instruction Manual
These items are all you need to set up and operate the TV
in its basic configuration.
*Most devices (VCRs, DVD player, etc.) come with the necessary
cable for connection. If you want to set up a complex system, you may need to buy
extra cable, connector, etc.
PREPARATION
6
9
Download from Www.Somanuals.com. All Manuals Search And Download.
TV
DFrEoSnCt RVIiPewTION
8
9
ITEM
DESCRIPTION
Volume up/right orientation
Volume down/left orientation
1 VOL+
2 VOL-
TV channel up/up orientation
3 CH+
4 CH-
TV channel down/down orientation
5 MENU
6 AV/TV
7 POWER
8 LED
MENU/ENTER
Select the input signals
Power On/Off (Standby)
The LED light indicates when the TV is activated
Infrared Receiver
9 IR
7
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
LCD TV
Front View
ITEM
1
DVD Pause
DVD Play
DVD Stop
2
3
4
DVD Open/Close
DVD Next
5
6
DVD Previous
PREPARATION
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TV
Rear View
ITEM
DESCRIPTION
Power input interface(12V DC).
1 DC 12V IN
2 HDMI
Connects to a digital set-top box or other deceives with a HDMI
interface.
Used to connect a video signal from a personal computer.
3 VGA
4 SCART
Connects to the SCART input jacks of the audio or video equipment.
Connects to the S-VIDEO intput jacks and Audio intput jacks on
your video equipment.
5 S-VIDEO
6 CVBS
Connects to the composite A/V input outputs jacks on your video
equipment.
7 PC Audio
Connects to the sound-output port of a personal computer.
8 Earphone out
9 CI
Earphone out interface.
CI slot
The RF input that connects to your VHF/UHF antenna or cable.
10 RF(75Ω)
9
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
LCD TV
POWER
1
2
3
20
2
Turns the TV on and into standby mode .
1
3
MUTE
Mutes and restores your TV sound.
0-9, -/--
0-9:TV channel number select or Teletext page number
select.
-/--:One bit,two bit or three bit TV channel select.
4
5
8
4
ASPECT
6
7
Return your latest program.
5
6
NICAM
NICAM/GERMAN Stereo server select.
9
ASPECT
Selects from the following modes settings:
Auto,4:3, 14:9,16:9,Subtitle,FullScreen,Zoom1,Zoom2.
(See Page14 for details)
10
LCD
MENU
12
13
15
11
14
VOL+/-
Volume up/down.
7
8
EXIT
CH+/-
Channel up/down.
16
19
FAV
FAV-
FAV+
EPG
LANG SUBTITLE
17
20
DISPLAY
9
AUDIO
Displays the source and channel's information .
18
ANGLE
ZOOM
10
11
ENTER
Allows you to move,select and setup the OSD options.
PROG INTRO REPEAT
A-B
EXIT/DVD SETUP
Exit from the current menu./Brings up DVD SETUP menu to
the screen(DVD Mode).
12
13
14
15
16
17
LCD MENU
Displays the OSD menu (on screen display).
PMODE
Select picture mode.
SMODE
Select sound mode.
INPUT
Source select.
SLEEP
Sets the TV sleep time.
:DVD Play/Pause.
:DVD Stop.
:DVD Open.
:DVD Previous.
:DVD Next.
:DVD Forward.
:DVD Backward.
PREPARATION
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
LCD TV
18
TEXT,HOLD,LANG/AUDIO,SUBTITLE,INDEX,SIZE,
REVEAL/ANGLE,SUBPAGE/ZOOM
TEXT:Switch to Teletex with text mode.
20
2
1
HOLD:Toggle hold on or off for current display page.
LANG/AUDIO:To show the list of audio languages available for the
current channel.Just in DVB mode/Select AUDIO mode(in DVD
mode).
SUBTITLE:To switch the dialogue at the bottom of the screen.
INDEX:Refer to index page.
SIZE:Change display size.
3
4
5
8
REVEAL/ANGLE:Reveal/hidden the hidden words./No use.
SUBPAGE/ZOOM:Sub coded page access./Enlarg or
reduces the main picture size(in DVD mode).
ASPECT
6
7
19
20
FAV,FAV-/FAV+,EPG
FAV:Press to display FAV menu.
FAV-/FAV+:Source decrease fav channel.
EPG:Press to show the Electronic Program Guide menu.
9
10
D.MENU,TITLE,D.DISP,GOTO,PROG,INTRO,
REPEAT,A-B
LCD
MENU
12
13
15
D.MENU: Bring up the DVD menu to the screen.
TITLE: Brings up the DVD menu to the screen.
D.DISP: Display the DVD’s information.
GOTO:Goto the files/time preriod that you want to play.
PROG:Change the display effect/edit the playing order.
INTRO:No use.
11
14
EXIT
16
19
FAV
FAV-
FAV+
EPG
LANG SUBTITLE
17
20
REPEAT:Select repeat mode.
A-B:Repeat from A to B.
AUDIO
18
ANGLE
ZOOM
21
AUTO/EJECT
Auto adjust (PC mode)./DVD open.
PROG INTRO REPEAT
A-B
11
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Installing the batteries in your remote control
Pull the tab of the back cover and pull up on
the cover to open the battery compartment
of the remote control.
1
Insert two AAA size batteries.
Make sure to match the (+) and (-) ends of
2
the batteries with the (+) and (-) ends indicated
in the battery compartment.
Align the lower tabs of the back cover to the
remote control and snap the cover into place.
3
Note :
Do not use caustic cleaners( porcelain, stainless steel, toilet, or oven cleaner, etc...).
You may cause damage to your remote control.
Effective range
Your remote control can be activated from up to the TV 5m away, if pointed directly
in front of the device.
30O
30O
5M
PREPARATION
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Features
Watching your TV
If the TV does not display any picture,please check all the connections.
Press the POWER button to turn your TV on.
1
5
1
3
Press the INPUT button to enter TV mode.
2
4
ASPECT
Press the CH +/- button to change channel number,
3
5
3
6
or use the 0-9 & -/-- buttons to select a channel.
The one/two digit numbers can be set by pressing -/--
button.
LCD
MENU
EXIT
Press the
button to alternate back and forth
4
5
between the current and previous channel.
2
FAV
FAV-
FAV+
EPG
LANG SUBTITLE
AUDIO
Press the VOL +/- button to adjust the volume.
Press the MUTE button to turn the sound off.
Press again to turn the sound on.
ANGLE
ZOOM
PROG INTRO REPEAT
A-B
Press the DISPLAY button th display the information such
6
as the channel and channel label.
Note: Select the menu language before operating the TV
(see page 15, LANGUAGE).
USING THE FEATURES
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Wide-Screen Mode
Wide-Screen mode allows you watch the broadcasts with various picture format in wide
screen mode. Press the ASPECT button repeatedly to toggle through the following wide
mode settings.
16:9
When watching 4:3 image, the original
image will stretch horizontally to a 16:9
image to fill the screen.
14:9
You can enjoy the picture format of 14:9 or
general TV program with the 14:9 mode.
Zoom1
The original image will extend the
1.25:1 image to fill the screen.
4:3
When watching 4:3 image, the original
image will be unchanged and there will
be vertical bars on the side of the screen.
Press the ASPECT button to select repeatedly modes settings as follows:
Auto
4:3
14:9
16:9
Zoom2
Zoom1
FullScreem
Subtitle
Note: You can only select 4:3 and 16:9 (Wide) in RGB[PC], HDMI mode only.
You can only select 4:3, 16:9 (Wide) and Zoom in RGB[DTV], HDMI[DTV],
Component [DTV] mode only.
USING THE FEATURES
124
13
Download from Www.Somanuals.com. All Manuals Search And Download.
First Time Installation
If this is the first time you open the TV and there is no
programs in the TV memory,the first time installation
menu will appear in the picture.
First Time Installation
Country
Other
Language
English
Country
Press
country.
button and then use
to select the
to select the
Delete Analog Program
Analog Program Search
Delete Digital Program
Digital Program Search
Language
Press
OSD language.
button and then use
OK
Cancel
Adjust
After setting the items,select OK to finish the first
timeinstallation,or select Cancel to exit this menu.
Select
OK
Press
:
You can press LCD-MENU button to stop auto
tuning and close the OSD menu.
Auto Tuning
Searching
ATV
1
422.00MHz
MENU
Exit
You can press LCD-MENU button to stop auto tuning and close the OSD menu.
Begin auto tuning in DTV channel.
Auto Tuning
Auto Tuning
Searching
ATV
Searching
DTV
1
422.00MHz
1
474.00MHz
Please waait .......
TV saviing chaannnels ddoo nnoott ppoowweerr ooffff oorr pprreessss aannyy bbuuttoonnss
If there is no program after auto tuning,the suggestion will appearon the screen.
First Time Installation
Unfortunately the TV did not find any channels.
Please check your aerial connetion
and refer to the user manual.
Do you wish to re-tune you TV.
Do It next time
YES
NO
If you cancelled the first time installation,it will remind you whether to set the first time
installation next time
Cancel
Press
:
First Time Installation
First time installation is not finished!
Are you sure to exit?
Do It next time
YES
NO
USING THE FEATURES
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
ATV Menu
PICTURE menu options
Press MENU button on the front panel or LCD-MENU on the remote control to display
the main menu.
1. Press
2. Press
button to select PICTURE in the main menu
button to select the option that you
want to adjust in the PICTURE menu.
3. Press
button to adjust.
4. When you are satisfied with your adjustment,press
the LCD-MENU button to retun the previous menu
or press the EXIT button to exit the main menu.
Picture Mode
Select picture mode in PICTURE menu.(Available picture mode:Standard,Movie,Sport,Mild,Game.)
If you change the value of Contrast,Brightness,Colour,Tint,Sharpness or Colour
temperature on the picture menu,the picture mode will be changed to “Personal” automatically.
You may select the picture mode directly by pressing PMOD button.
TIPS: You can press PMOD button on the remote control to select the Picture Mode directly.
Contrast
Press
button and then use
to adjust the contrast of the picture.
Contrast
28
After adjusting the value you want,press LCD-MENU button to return to the preview MENU.
Brightness
Press
button and then use
to adjust the brightness of the picture.
to adjust the colour saturation.
Colour
Press
button and then use
NOTE: this option is invalid in PC mode,and it will be shown ingray
Tint
Press
button and then use
to adjust the tone of colour when your system is in NTSC.
Sharpness
Press
to select the sharpness mode of your
TV.(Available Sharpend Mode:Normal,Sharp,
Sharpest,Softest,Soft.)
Colour temperature
Select an optimum colour temperature mode to suit
your eyes for viewing among Normal,Warm and Cold.
NOTE:This option is available only in PC mode.
DNR(Digital Noise Reduction)
If thebroadcast signal received is weak,you can select
the DNR option to reduce the video noise level
between Off,Low,Mid and High.
12
USING THE FEATURES 16
15
Download from Www.Somanuals.com. All Manuals Search And Download.
ATV Menu
SETUP
SOUND menu options
Press MENU button on the front panel or LCD-MENU on the remote control to display
the main menu.
1. Press
2. Press
button to select SOUND in the main menu
button to select the option that you
want to adjust in the SOUND menu.
3. Press
button to adjust.
4. When you are satisfied with your adjustment,press
the LCD-MENU button to return the previous menu
or press the EXIT button to exit the main menu.
Volume
Press
button and then use
to adjust the sound level.
Volume
28
After adjusting the value you want,press LCD-MENU button to return to the preview MENU.
Sound Mode
Select Sound Mode in SOUND menu.(Available sound mode:Personal,Voice,Music,Theatre.)
If you change the value of Bass and Treble on the Sound menu,the sound mode will be changed to
“Personal” automatically.
You may select the sound mode directly by pressing SMODE button.
TIPS: You can press SMODE button on the remote control to select the Sound Mode directly.
Bass
Press
button and then use
button and then use
to increase or decrease the level of the lower-pitched sounds.
to increase or decrease the level of the higher-pitched
Treble
Press
sounds.
Treble
Press
left and right speakers.
button and then use
to increase or decrease the level of the audio output between
17 USING THE FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
ATV Menu
SETUP
SETUP menu options
Press MENU button on the front panel or LCD-MENU on the remote control to display
the main menu.
NOTE:SETUP menus are different for different input sources,if the input source is selected HDMI/
VGA and there are no relative input signal,SETUP menu will be unavailable.
SETPUT menu of TV input:
1. Press
2. Press
button to select SETUP in the main menu
button to select the option that you
want to adjust in the SETUP menu.
3. Press
button to adjust.
4. When you are satisfied with your adjustment,press
the LCD-MENU button to retun the previous menu
or press the EXIT button to exit the main menu.
Country
This option allows you to select the country.
Auto Tuning
This option allows you to tune the channels that can be received automatically.
Note:Before you perform Auto Tuning,you must choose the country where you are by
selecting Country option.
Press OK key to start.
Auto Tuning
Searching
ATV
1
422.00MHz
MENU
Exit
You can press LCD-MENU button to stop auto tuning and close the OSD menu.
17
USING THE FEATURES 18
Download from Www.Somanuals.com. All Manuals Search And Download.
ATV Menu
Manual Tuning
This option allows you to perform Manual Tuning.
NOTE:Before you perform Manual Tuning,you must choose the country where you are by
selecting Country optiom.
1. Press
setup menu
2. Press
button to select Manual Tuning in the
button to perform yor selection,the menu of
Manual Tuning will display on the screen.
Program
The current program number.press
upper or lower program.
Sound System
Press
to select a corresponding sound system,such as I,DK,BG.
Colour System
Press
to select a corresponding colour system,such as Auto,PAL,SECAM.
Program Label
This option allows you to label a channel,you can also relabel the programs have been labeled.
1. Select a channel you want to labeled.
2. Press
3. Press
to select Program Labeled in the SETUP menu.
to perform yor selection,the menu of Program Label will display as below.
Program Label
4. Press the numeric buttons to input the numbers directly or press
5. Press to move the cursor.
to select the letters.
6. Press ENTER,LCD-MENU or EXIT button to confirm and return to previous menu.
AFT(Auto Fine Tune)
Due to weak signals or a wrong antenna configuration,some of the channels may not be tuned
to the best reception condition.AFT function allows you to fine tune channel selected(the
frequency of channel is around the value in Manual Search option).
Manual Search
MHz
Manual Search
.
This option has two functions:
1. Set the puency of channel for AFT option.
2. Press button for 3+ seconds and it will start auto tuning from this frepuency.
USING THE FEATURES
18
129
Download from Www.Somanuals.com. All Manuals Search And Download.
ATV Menu
SETUP
Program Edit
This function allows ypu to sort the TV programs according to ypur preferences,as following:
1. Press
to select Program Edit in the SETUP
to enter into the sub menu,a channel list
to select the channel in the list which you
menu.
2. Press
will display.
3. Press
would like to sort.
4. Press
to perform your selection.
5. Press
to select the location you would like to
place the channel.
6. Press
to perform your selection.
7. Press LCD-MENU to return to the previous menu or
press EXIT to exit.
Favorite:Press green button on remote control to select the favourite programs.
Press FAV button to open the Favorite List,you can open your favourite programs then Press
to
select the channel you want to watch.
Skip:Press yellow button on remote control to select which programs you want to skip.
Press yellow button again thes program will unlock.
Favorite:Press blue button on remote control to lock the programs.
Press blue button again this program will not be skipped.
1220
19
USING THE FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
ATV Menu
SETUP
SETUP menu of VGA input(for setting the PC picture position):
SETUP menu of HDMI input(for setting the HDMI picture position):
12
21
USING THE FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
ATV Menu
SETUP
Timer menu options
Press MENU button on the front panel or LCD-MENU on the remote control to display
the main menu.
1. Press
2. Press
button to select TIMER in the main menu
button to select the option that you
want to adjust in the TIMER menu.
3. Press
button to adjust.
4. When you are satisfied with your adjustment,press
the LCD-MENU button to retun the previous menu
or press the EXIT button to exit the main menu.
Sleep Timer
Select the sleep time to put automatically the TV in standby mode.Timer can be selected as 0min,
15min,30min,45min,60min,75min,90min,105min,120min.Also you can select the sleep time by
pressing SLEEP button repeatedly.
OSD Timer
You can select the time when the OSD display on the screen such as:5sec,10sec,15sec,20sec,
25sec,30sec.
Function menu options
Press MENU button on the front panel or LCD-MENU on the remote control to display
the main menu.
1. Press
menu
2. Press
button to select FUNCTION in the main
button to select the option that you
want to adjust in the FUNTION menu.
3. Press
button to adjust.
4. When you are satisfied with your adjustment,press
the LCD-MENU button to retun the previous menu
or press the EXIT button to exit the main menu.
Language
Press
to select the OSD language.
Video Size
This option allows you to select the screen display mode which best corresponds to your
viewing requirements.
NOTE:The available aspect mode may be different in different input signal.
Blue Screen
This option allows you to select the blue background on or off.If on,the screen background
will turn blue very weak or no signal condition.
1
22
21
USING THE FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
ATV Menu
SETUP
Child Lock
Press ENTER or
button to set the child lock.
You need to enter the PIN code if the Child Lock is set “on”,and the default PIN code is
empty,you can press ENTER button directly to enter.
TIPS:The superuser’s(administrator’s)password is 4711.
Child Lock
Press ENTER or
btton to set the child lock.
btton to set the key lock.
Key Lock
Press ENTER or
Change PIN Code
Press ENTER or
btton to set the Change PIN Code.
Old PIN Code
Press 0~9 buttons to enter the correct old PIN code,you can not change the PIN
code if you entered a wrong PIN code.
New PIN Code
Press 0~9 buttons to enter the new PIN code you want.
Enter Again
Press 0~9 buttons to enter the PIN code you entered in the New PIN Code menu
again to confirm the new PIN code.
First Time Installation
Press button to open the First Time Installation menu,and the operation of this menu is in page 13.
Reset
Press ENTER or
btton to reset the TV to the factory default.
USING THE FEATURES
22
1223
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV Menu
SETUP
Channel List options
Press ENTER button to open the Channel List,then press
want to watch.
to select the channel you
Favorite List options
Press FAV button open the Favorite List,then press
to select the channel you want to watch.
24
12
23
USING THE FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV Menu
SETUP
Channel Search options
1. Press
2. Press
3. Press
button to select SETUP in the main menu
button to select your option what you want to adjust in the SETUP menu.
button to adjust.
4. When you are satisfied with your adjustment,press the LCD-MENU button to retun the previous
menu or press the EXIT button to exit the main menu.
Press
button to select Manual Search,Press ENTER or
button to set the Manual Tuning.
Channel
The current channel number.Press
select the channel directly.
to select the upper or lower channel,Press 0~9 to
Start Search
To select whether to start seaching in begin/searching/finished.
Sercice Found
The services be found.
Signal Quality
The signal quality of current channel.
Signal Strength
The signal strength of current channel.
Frequency
The frequency of current channel.
USING THE FEATURES
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV Menu
SETUP
Program Edit
This function allows you to edit the DTV programs according to your preferences,as following:
Common Interface
If you have inserted the CI card to the TV,you can see the information of the it.
1226
USING THE FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
EPG Menu
SETUP
EPG(Electronic Programme Guide) options
Use EPG button on the remote control to display the EPG menu directly as below:
Press
to navigate the menu.
Press EPG button again to exit EPG.
Press yellow/blue button to select advance day.
Press OK button to set the reminder function.
Press
to select the program you want to teleview.Press OK button.When this program
begin to play,you will be reminded.
USING THE FEATURES
26
1227
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD SETUP Menu
SETUP
2.Press DVD-SETUP key,show the main menu.
1.Input mode: DVD.
3.Press
4.Press
to chose items that are going to be set up.Then pres to enter the setup menu.
to move the highlight to the items that is to be setup.Press ENTER for confirmation or
press
5.Press
6.Press
to the setup menu.
to adjust items.
to EXIT SETUP,then press ENTER or press DVD-SETUP key to exit setup menu.
Notice:The system automatically change to the pause mode after enter the setup menu.
General
TV Display:Set TV Display mode.
Angle Mark:Set Angle Mark.
OSD Languge:Set OSD Languge.
Captions:Captions.
Screen Saver:Screen Saver.
Last Memory:Set Last Memory.
Audio
Downmix:Set Downmix mode.
12
28
27
USING THE FEATURES
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD SETUP Menu
SETUP
DOLBY
:
DYNAMIC:Screen display as following.
Video
Sharpness:Adjust the sharpness of the picture.
Brightness:Adjust the Brightness of the picture.
Contrast:Adjust the Contrast of the picture.
Preference
Audio:Set Audio language.
Subtitle:Set Subtitle language.
Disc:Set Disc language.
Parental:Set Parental control.
Password:Change Password.
Default:Load factory setting.
USING THE FEATURES
26
1229
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Panel System
19 inch LCD panel
22 inch LCD panel
Display Resolution
Television System
Inputs/Output
1680(H)×1050(V)
1440(H)×900(V)
PAL I,D/K,B/G SECAM D/K,B/G
1
1
1
1
HDMI input
VGA input
SCART input
1
1
1
1
1
1
1
1
S-VIDEO input
CVBS input/AUDIO(L/R)
PC AUDIO
1
1
1
1
Earphone out
CI slot
English,French,Spanish,German,
Italian, Portuguese
OSD language
Speaker Out
Power supply
Power Waste
2×3W
DC 12V
<60W
<48W
29
USING THE FEATURES
30
Download from Www.Somanuals.com. All Manuals Search And Download.
GUARANTEE
GUARANTEE
26
1321
Download from Www.Somanuals.com. All Manuals Search And Download.
GUARANTEE
GUARANTEE
32
Download from Www.Somanuals.com. All Manuals Search And Download.
|
ADTRAN Switch 1280050L1 User Manual
ADTRAN Switch ADT 1234POE User Manual
Aiphone Stereo System JK 1SD User Manual
Allied Telesis Network Router AT AR236E User Manual
Altec Lansing Speaker SLS6221 User Manual
Atlona Telephone AT HDTX RSNET User Manual
Atlona TV Cables AT HD30SR User Manual
ATON Universal Remote DLA2RM User Manual
Beko Dishwasher DFN 1000 X User Manual
Beko Dishwasher DFS1530 User Manual