User’s Manual
Version 1ꢀ2 July 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
V-TONE GM110
V-TONE
True Analog Modeling 30-Watt Guitar Amp with
Speaker Simulations and Direct Out
s
Powerful 30-Watt guitar amplifier, equipped with an original JENSEN® / BUGERATM 10" guitar speaker
s
Authentic V-TONE Analog Modeling for 3 classic guitar amps, 3 speaker simulation models plus 3 gain
modes—providing you with 27 modeled sounds
s
s
Patented* DYNAMIZER circuitry captures every nuance of your playing and lends tube-like compression
to your tone
Balanced direct out with XLR connector and ground lift delivers full preamplified sound including all amp,
speaker, gain mode, drive, EQ and level settings for direct recording or connection of an external power
amp/cabinet combination
s
s
s
s
s
s
s
FX loop for external effects devices (rack effects, stomp boxes, wah-wah pedals, etcꢀ)
Extensive master section with dedicated 3-band EQ and master level control
Wide-range drive control for super-fat sounds with any pickups
Headphone output with speaker simulation lets you practice anywhere and at any time
Additional 4 Ohm speaker out with automatic internal speaker mute
Rugged construction for years of trouble-free use
Conceived and designed by BEHRINGER Germany
* German Patent Noꢀ: 100 15 833
3
Download from Www.Somanuals.com. All Manuals Search And Download.
V-TONE GM110
FOREWORD
1ꢀ INTRODUCTION
Dear Customer,
Thank you for purchasing the V-TONE GM110ꢀ The GM110 is
a modern Guitar Workstation that sets new standards in practice
amp engineeringꢀ
welcome to the team of
BEHRINGER users, and
thank you very much for
expressing your confi-
dence in us by pur-
chasing the BEHRINGER
V-TONEꢀ
When developing the GM110, our primary objective was to
reproduce the authentic sound of analog guitar amplifiers and at
the same time provide you with a tool for straightforward
recordingꢀ The concept of intuitive operation remained a central
considerationꢀ
Writing this foreword for
you gives me great
pleasure, because it
represents the cul-
mination of many months
of hard work delivered
by our engineering team
Many people contributed to this intense development project:
studio musicians, collectors of vintage guitar amps, music and
guitar lovers alikeꢀ We even invited guitar amp tuning experts to
help us develop an amplifier that unites the very best of both
worldsꢀ
The demands placed on a guitar amp are nowadays very
broadꢀ A guitarist should offer a wide array of sounds, but at the
same time be able to quickly adapt to specific requirements of
various applications—be it home recording, studio, live perfor-
mances, etcꢀ That’s why it is very important to us to be able to
offer you a maximal sound diversity as well as diverse connection
possibilities with our V-TONEꢀ Fret not: you will quickly master
the V-TONE and will be able to quickly learn how to use all of its
capabilities easily and intuitivelyꢀ
to achieve
a
very
ambitious goal: to de-
velop an outstanding
guitar amp that is at the
forefront of what is
technically possible and that can be used in many different
applicationsꢀ Our guitar amps offer you strong performance,
their sound is amazingly clear, and they are easy to use both as
direct recording amps as well as stage ampsꢀ The task of designing
our new V-TONEs certainly meant a great deal of responsibility,
which we assumed by focusing on you, the discerning user and
musicianꢀ Meeting your expectations also meant a lot of work
and night shiftsꢀ But it was fun, tooꢀ Developing a product usually
brings a lot of people together, and what a great feeling it is
when all who participated in such a project can be proud of
what they’ve achievedꢀ
With its up-to-date circuitry, the V-TONE features the
functionality and dependability of a truly modern guitar ampꢀ Yet
it is user-friendly and problem-free as if it were a classic tube
comboꢀ We highly recommend taking your time to truly learn all of
the V-TONE’s functions so you can reach its maximum potentialꢀ
1ꢀ1 The design concept
The philosophy behind BEHRINGER products guarantees a
no-compromise circuit design and employs the best choice of
componentsꢀ The operational amplifiers employed by BEHRINGER
and used in the V-TONE GM110 are exceptional: they boast
extreme linearity and very low distortion characteristicsꢀ To
complement this, the choice of components includes low-tolerance
resistors and capacitors, high-quality potentiometers and
switches, and several other carefully selected elementsꢀ
It is our philosophy to share our enjoyment with you, because
you are the most important member of the BEHRINGER teamꢀ
With your highly competent suggestions for new products you’ve
made a significant contribution to shaping our company and making
it successfulꢀ In return, we guarantee you uncompromising quality
as well as excellent technical and audio properties at an extremely
reasonable priceꢀ All of this will enable you to give free rein to
your creativity without being hampered by budget constraintsꢀ
The robust housing of your V-TONE, with its oversize power
supply, gives you the peace of mind that the V-TONE will hold its
own even under the most demanding stage conditionsꢀ The
housing is made of high-grade, environment-friendly MDF wood
consisting of multiply impregnated layersꢀ
We are often asked how we manage to produce such high-
quality devices at such unbelievably low pricesꢀ The answer is
quite simple: it’s you, our customers! Many satisfied customers
mean large sales volumes enabling us to get better purchasing
terms for components, etcꢀ Isn’t it only fair to pass this benefit on
to you? Because we know that your success is our success
too!
1ꢀ2 DYNAMIZER technology and
analog modeling
I would like to thank all of you who have made the V-TONE
Series possibleꢀ You have all made your own personal
contributions, from the developers to the many other employees
at this company, and to you, the BEHRINGER userꢀ
When an electric instrument is amplified, that’s where you
either make it or break itꢀ Unlike the signals that have been mixed
and mastered, the signals of electric instruments have extremely
high signal peaks, placing the dynamic range of the amp’s circuitry
under immense strainꢀ How your amp reacts to these signal
peaks is one of its most defining characteristicsꢀ
My friends, it’s been worth the effort!
Thank you very much,
That’s why we’ve equipped all V-TONE Series amps with our
unique DYNAMIZER preamplifier circuitryꢀ It guarantees a lively
sound with a lot of punch, even when the amp is pushed to its
limitsꢀ Combine that with our V-TONE analog modeling, and not
only do you have amazingly authentic tube sounds at your
fingertips, you also get the dynamic performance typical of the
respective amp typeꢀ Crystal-clear guitar tones come through
with transparency, warmth and the compression typical of tube
ampsꢀ Even as distortion increases, the sound remains lively
and full of power, without losing any of its assertivenessꢀ
Uli Behringer
All along, you have full control over the volumeꢀ Plainly talking,
you can take the same sound you are used to at your practice
room and replicate it in your bedroom at much more reasonable
volume levels, or you can even record yourself while playingꢀ
4
1ꢀ INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
V-TONE GM110
+
The following user’s manual will familiarize you with
the control elements of your new V-TONE and let
you learn all of its functions! After reading this
manual, store it somewhere where you can easily
find in the future, should you need to look up some
information!
The fuse mount near the power cord connector has three
triangular markingsꢀ Two of these triangles are facing opposite
one anotherꢀ Your V-TONE is set up for the voltage indicated
near these markings, and can be altered by turning the fuse
mount by 180 degreesꢀ ATTENTION: This does not apply to
export models built for 120 V, for example!
+
If you use your V-TONE unit with a different voltage,
you must change the fuses accordingly! The correct
value of the fuses needed can be found in the
chapter “SPECIFICATIONS”!
1ꢀ3 Before you get started
1ꢀ3ꢀ1 Shipment
The V-TONE was carefully packed at the assembly plant to
assure secure transportꢀ
+
Faulty fuses must be replaced with fuses of
appropriate rating, without exception! The correct
value of the fuses needed can be found in the
chapter “SPECIFICATIONS”!
Should the condition of the cardboard box suggest that your
V-TONE may have been damaged in transport, please inspect
the unit immediately and look for physical indications of damageꢀ
Power is delivered via the cable that was delivered with the V-
TONEꢀ All mandatory safety precautions have been adhered toꢀ
+
Damaged equipment should NEVER be sent directly
to us! Please inform the dealer from whom you
acquired it immediately as well as the
transportation company from which you took
delivery! Otherwise, all claims for replacement/
repair may be rendered invalid!
+
Please make sure that all your equipment is
grounded at all times! For your own protection, you
should never tamper with the grounding of the cable
or the unit itself! The unit shall always be connected
to a mains socket outlet with a protective earthing
connection! You can eliminate humming problems
caused by grounding at the D!I! OUT by pressing the
1ꢀ3ꢀ2 Initial operation
GND switch (Groundlift,
)!
Please make sure that your V-TONE is provided with sufficient
ventilation, and never place it on other amplifiers or in the vicinity
of a heater to avoid the risk of overheatingꢀ
1ꢀ3ꢀ3 Warranty
Please send the completely filled out warranty card within 14
days of purchase to us, as warranty claims may otherwise be
rendered invalidꢀ The serial number of your V-TONE is located
on the rearꢀ Alternatively, you may register online at
wwwꢀbehringerꢀcomꢀ
+
Before plugging your V-TONE into a power socket,
please make sure you have selected the correct
voltage:
2ꢀ CONTROL ELEMENTS
2ꢀ1 Front panel
Figꢀ 2ꢀ1: Front panel control elements
INPUT is the GM110’s 1/4" jack input for your guitarꢀ Use a
commercial 1/4" jack mono cable (not from a DIY shop, but
from a specialist music dealer)ꢀ
differentiated, the CALIF(ORNIAN) setting is particularly
suitable for singing lead soundsꢀ
With the MODE switch, you choose between one of three
possible gain settings (CLEAN, HI GAIN and HOT) to achieve
the basic sound selected with the AMP switchꢀ
The DRIVE control determines the amplification in the input
sectionꢀ It allows you to finely tune the GM110 preset to the
output level of your guitar pick-up (depending on selected
amp, mode and speaker combination) in order to achieve
the desired degree of distortionꢀ
The SPEAKER switch provides you with simulations of
two classic guitar loudspeakers: 4x12"-loudspeakers in a
closed back enclosure (UꢀKꢀ), and 2x12" loudspeakers,
open back (UꢀSꢀ)ꢀ In addition, we have also installed a
further frequency response correction (FLAT) that is
specially adapted to the GM110 enclosureꢀ
+
Use the DRIVE control to set the desired sound and
use the MASTER control to set the desired volume!
The AMP switch enables you to emulate the basic sounds
from three guitar amp designs; these are based on classic
amp models and will be familiar to you from numerous
recordingsꢀ The TWEED setting delivers transparent
sounds, clear as a bell, with dynamic bass responseꢀ The
BRITISH setting has an aggression that comes straight from
the heart and is powerful with an unmistakable ability to
make itself heardꢀ Fuller and more balanced, and yet subtly
The LOW control in the EQ section enables you to boost or
cut the bass frequenciesꢀ
With the MID control, you can boost/cut the midrange
frequenciesꢀ
The HIGH control governs the upper frequency rangeꢀ
5
2ꢀ CONTROL ELEMENTS
Download from Www.Somanuals.com. All Manuals Search And Download.
V-TONE GM110
With the MASTER control, you determine the overall and
headphone volume of your V-TONE GM110ꢀ It should be
set fully to the left when you operate the POWER switch or
disconnect the instrument cable from the guitar or ampꢀ
The POWER switch should always be in the “Off” position
when you are about to connect your unit to the mainsꢀ
+
Attention: The POWER switch does not fully
disconnect the unit from the mains! Unplug the
power cord completely when the unit is not used
for prolonged periods of time!
Use the POWER switch to put the GM110 into operationꢀ
2ꢀ2 Rear panel
BEHRINGER® V–TONE
MODEL GM110
CONCEIVED AND DESIGNED
BY BEHRINGER GERMANY.
ASSEMBLED IN CHINA UNDER
ISO9000 CERTIFIED
MANAGEMENT SYSTEM.
CAUTION
REPLACE WITH SAME FUSE
TYPE AND RATING.
ATTENTION
UTILISER UN FUSIBLE DE
RECHANGE DE MEME
TYPE ET CALIBRE.
OUTPUT
230
V
:
50/60 Hz 70
W
FUSE:
˜
T
1.0 250
A
H
V
Figꢀ 2ꢀ2: Rear panel connectors
FUSEHOLDER / VOLTAGE SELECTIONꢀ Before you
connect the device to the network, please make sure that
your local voltage matches the voltage indicated on the
unitꢀ Blown fuses may only be replaced by fuses of the
same type and ratingꢀ Some models allow for inserting the
fuse holder in two different positions in order to switch
over from 230 V to 120 V operation, and vice versaꢀ Please
note that, for 120 V operation outside Europe, you need to
use a fuse of a higher ratingꢀ The network connection is
made via a STANDARD IEC INLET SOCKETꢀ Use the
enclosed power cord to connect the unit to the mainsꢀ
At the DꢀIꢀ OUT output (balanced XLR socket), you can tap
the audio signal of the V-TONE GM110 in order, for example,
to feed it into a mixing console and record itꢀ This audio
signal is frequency-corrected (Speaker Simulation)ꢀ The
level of the DꢀIꢀ OUT (maxꢀ +22 dBu) is designed to provide
simple connection to mixers or other audio devicesꢀ
With the GND LIFT switch, you can unplug the electrical
bonding of the DꢀIꢀ OUT, if ground loop or humming problems
occurꢀ
FX SEND is the output socket for the serial effects path of
the GM110ꢀ You can use this to loop in the external effects
(eꢀgꢀ a wah-wah pedal) or to connect an external power
amplifier, should you require a greater outputꢀ The internal
signal path will not be interruptedꢀ The frequency-corrected
signal at the FX SEND socket is affected by all GM110
controlsꢀ
SERIAL NUMBERꢀ Please take the time to fill out the
warranty card within 14 days of purchasing the device,
otherwise you will lose your extended warrantyꢀ Or simply
register online at wwwꢀbehringerꢀcomꢀ
You can use the SPEAKER socket to connect an additional
loudspeaker to your V-TONE GM110ꢀ The external
loudspeaker should have an impedance of 4 Ohmsꢀ When
using this socket, the internal loudspeaker is mutedꢀ For
additional information on connecting an external
loudspeaker, refer to chapter 4ꢀ1ꢀ
The output of the looped-in effects device is connected to
the FX RETURN socketꢀ When you connect a cable to this
socket, you interrupt the internal signal pathꢀ
+
Please note that, when using the serial effects path,
the effects device will control the level of wet
(affected) signal to dry (direct) signal!
The 6ꢀ3 mm PHONES jack allows you to monitor the GM110’s
audio signal with a pair of commercially available
headphonesꢀ As soon as this socket is used, the
loudspeaker will be mutedꢀ
+
+
Since speakers can have quite an impact on the
sound of a guitar amp, both the headphones and
D!I! OUT signals are frequency-corrected (with
speaker correction)! Without this frequency
correction extreme treble frequencies would
deteriorate the sound!
Low-impedance headphones may begin to produce
distortion at certain volume levels! In such cases,
please reduce the volume by turning back the
MASTER control!
6
2ꢀ CONTROL ELEMENTS
Download from Www.Somanuals.com. All Manuals Search And Download.
V-TONE GM110
3ꢀ WIRING TIPS
3ꢀ1 Standard set-up consisting of guitar, external effects device and simultaneous recording
Figꢀ 3ꢀ1: Standard set-up for recording with the V-TONE GM110
To use your V-TONE GM110 for rehearsals, in the studio or on
stage, please wire up the unit as shown in figꢀ 2ꢀ1ꢀ Of course,
you can also use a wah-wah or other pedal effect instead of the
external 19" effects unitꢀ Connecting the headphones will mute
the built-in speakerꢀ
If you wish to use a guitar tuner, please connect it to the FX
SEND of your V-TONE GM110ꢀ If there is no further effects
device connected, you can leave the FX RETURN as it isꢀ When
using an external effects device, the tuner should be placed
before the effects device to prevent the tuner from receiving
any effects signalꢀ
4ꢀ AUDIO CONNECTIONS
Figꢀ 4ꢀ1: 1/4" TS connector (input, FX send, FX return,
speaker)
The BEHRINGER V-TONE GM110 is fitted with audio inputs and
outputs in the form of 1/4" mono jacksꢀ The exceptions to this are
the headphones output and the DꢀIꢀ OUTꢀ
+
+
Please ensure that only qualified personnel install
and operate the device!
Please make sure that all units have a proper
ground connection! For your own safety, never
remove or disable the ground conductor of the unit
or of the AC power cable! Instead, you can eliminate
hum problems caused by grounding (e!g! when
connected to a mixing console) by pressing the
GND switch (Groundlift,
)!
4ꢀ2: Wiring of a stereo headphones plug
7
4ꢀ AUDIO CONNECTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
V-TONE GM110
5ꢀ SPECIFICATIONS
AUDIO INPUTS
Guitar input
Connector
1/4" mono jack socket
Type
RF filtered input
Input impedance
FX return
Connector
Input impedance
approxꢀ 1 MΩ unbalanced
1/4" mono jack socket
approxꢀ 1 MΩ unbalanced
AUDIO OUTPUTS
FX send
Connector
1/4" mono jack socket
Type
Output impedance
Low-impedance line level output
approxꢀ 100 Ω unbalanced
Figꢀ 4ꢀ3: XLR connectors (DꢀIꢀ Out)
DꢀIꢀ Out
Connector
Type
XLR
Balanced, low-impedance line
level output
4ꢀ1 Loudspeaker connection
Output impedance
Maxꢀ output level
approxꢀ 100 Ω
The GM110 features a loudspeaker connection (mono jack
socket) that allows you to hook up a supplementary speakerꢀ
Optimum adaptation of the amp to the loudspeaker is ensured
with an 4 Ω loudspeakerꢀ With too high an impedance load, the
maximum power output will drop in proportion to the resistance
connectedꢀ
+22 dBu
LOUDSPEAKER OUPUT
Connector
Load impedance (nomꢀ)
1/4" mono jack socket
4 Ω
SYSTEM SPECIFICATIONS
Power amp output
+
Do not use an instrument cable to connect an
external loudspeaker, rather use special
loudspeaker cable! This will prevent any
unnecessary losses of sound and output!
30 Watts RMS into 4 Ω
a
LOUDSPEAKER
Type
10" Vintage loudspeaker, model
JENSEN®
JCH10/35
or
BUGERATM loudspeaker
4 Ω
Impedance
Power handling
35 Watts (JENSEN®)
60 Watts (BUGERATM
)
POWER SUPPLY
Mains voltage
USA/Canada
120 V~, 60 Hz
Europe/UꢀKꢀ/Australia 230 V~, 50 Hz
Japan
100 V~, 50 - 60 Hz
General export model 120 /230 V~, 50 - 60 Hz
Power consumption 70 W maximum
Fuse
100 - 120 V~: T 2 A H 250 V
200 - 240 V~: T 1 A H 250 V
Standard IEC receptacle
Mains connection
DIMENSIONS/WEIGHT
Dimensions (H x W x D)
approxꢀ 15" (381 mm) x 14 ½"
(369 mm) x 9 ½" (242 mm)
approxꢀ 12ꢀ5 kg
Weight
BEHRINGER is constantly striving to maintain the highest quality standardsꢀ Modifications
may be made to existing products without prior noticeꢀ Specifications and appearance may differ
from those listed or illustratedꢀ
8
5ꢀ SPECIFICATIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
V-TONE GM110
6ꢀ WARRANTY
§ 1 WARRANTY CARD/ONLINE REGISTRATION
3ꢀ Free inspections and maintenance/repair work are expressly
excluded from this warranty, in particular, if caused by improper
handling of the product by the userꢀ This also applies to defects
caused by normal wear and tear, in particular, of faders,
crossfaders, potentiometers, keys/buttons, tubes, guitar strings,
illuminants and similar partsꢀ
To be protected by the extended warranty, the buyer must
complete and return the enclosed warranty card within 14 days
of the date of purchase to BEHRINGER Spezielle Studiotechnik
GmbH, in accordance with the conditions stipulated in § 3ꢀ Failure
to return the card in due time (date as per postmark) will void any
extended warranty claimsꢀ Based on the conditions herein, the
buyer may also choose to use the online registration option via
the Internet (wwwꢀbehringerꢀcom or wwwꢀbehringerꢀde)ꢀ
4ꢀ Damages/defects caused by the following conditions are
not covered by this warranty:
s improper handling, neglect or failure to operate the unit in
compliance with the instructions given in BEHRINGER user
or service manualsꢀ
§ 2 WARRANTY
1ꢀ BEHRINGER (BEHRINGER Spezielle Studiotechnik GmbH
including all BEHRINGER subsidiaries listed on the enclosed page,
except BEHRINGER Japan) warrants the mechanical and
electronic components of this product to be free of defects in
material and workmanship for a period of one (1) year* from the
original date of purchase, in accordance with the warranty
regulations described belowꢀ If the product shows any defects
within the specified warranty period that are not excluded from
this warranty as described under § 4, BEHRINGER shall, at its
discretion, either replace or repair the product using suitable
new or reconditioned partsꢀ In the case that other parts are used
which constitute an improvement, BEHRINGER may, at its
discretion, charge the customer for the additional cost of these
partsꢀ
s connection or operation of the unit in any way that does not
comply with the technical or safety regulations applicable in
the country where the product is usedꢀ
s damages/defects caused by force majeure or any other
condition that is beyond the control of BEHRINGERꢀ
5ꢀ Any repair or opening of the unit carried out by unauthorized
personnel (user included) will void the warrantyꢀ
6ꢀ If an inspection of the product by BEHRINGER shows that
the defect in question is not covered by the warranty, the
inspection costs are payable by the customerꢀ
7ꢀ Products which do not meet the terms of this warranty will
be repaired exclusively at the buyer’s expenseꢀ BEHRINGER will
inform the buyer of any such circumstanceꢀ If the buyer fails to
submit a written repair order within 6 weeks after notification,
BEHRINGER will return the unit CꢀOꢀDꢀ with a separate invoice
for freight and packingꢀ Such costs will also be invoiced
separately when the buyer has sent in a written repair orderꢀ
2ꢀ If the warranty claim proves to be justified, the product will
be returned to the user freight prepaidꢀ
3ꢀ Warranty claims other than those indicated above are
expressly excludedꢀ
§ 3 RETURN AUTHORIZATION NUMBER
1ꢀ To obtain warranty service, the buyer (or his authorized
dealer) must call BEHRINGER (see enclosed list) during normal
business hours BEFORE returning the productꢀ All inquiries must
be accompanied by a description of the problemꢀ BEHRINGER
will then issue a return authorization numberꢀ
§ 5 WARRANTY TRANSFERABILITY
This warranty is extended exclusively to the original buyer
(customer of retail dealer) and is not transferable to anyone
who may subsequently purchase this productꢀ No other person
(retail dealer, etcꢀ) shall be entitled to give any warranty promise
on behalf of BEHRINGERꢀ
2ꢀ Subsequently, the product must be returned in its original
shipping carton, together with the return authorization number to
the address indicated by BEHRINGERꢀ
§ 6 CLAIM FOR DAMAGES
Failure of BEHRINGER to provide proper warranty service shall
not entitle the buyer to claim (consequential) damagesꢀ In no
event shall the liability of BEHRINGER exceed the invoiced value
of the productꢀ
3ꢀ Shipments without freight prepaid will not be acceptedꢀ
§ 4 WARRANTY REGULATIONS
1ꢀ Warranty services will be furnished only if the product is
accompanied by a copy of the original retail dealer’s invoiceꢀ
Any product deemed eligible for repair or replacement under the
terms of this warranty will be repaired or replacedꢀ
§ 7 OTHER WARRANTY RIGHTS AND NATIONAL LAW
1ꢀ This warranty does not exclude or limit the buyer’s statutory
rights provided by national law, in particular, any such rights
against the seller that arise from a legally effective purchase
contractꢀ
2ꢀ If the product needs to be modified or adapted in order to
comply with applicable technical or safety standards on a national
or local level, in any country which is not the country for which
the product was originally developed and manufactured, this
modification/adaptation shall not be considered a defect in
materials or workmanshipꢀ The warranty does not cover any
such modification/adaptation, irrespective of whether it was
carried out properly or notꢀ Under the terms of this warranty,
BEHRINGER shall not be held responsible for any cost resulting
from such a modification/adaptationꢀ
2ꢀ The warranty regulations mentioned herein are applicable
unless they constitute an infringement of national warranty lawꢀ
* Customers in the European Union please contact BEHRINGER
Germany Support for further detailsꢀ
Technical specifications and appearance subject to change without noticeꢀ The information contained herein is correct at the time of printingꢀ
JENSEN® and its respective logo are registered trademarks of its respective ownerꢀ Their use neither constitutes a claim of the trademarks by
BEHRINGER® nor affiliation of the trademark owners with BEHRINGER®ꢀ BEHRINGER® accepts no liability for any loss which may be suffered by
any person who relies either wholly or in part upon any description, photograph or statement contained hereinꢀ Colours and specification may vary
slightly from productꢀ Products are sold through our authorised dealers onlyꢀ Distributors and dealers are not agents of BEHRINGER® and have
absolutely no authority to bind BEHRINGER® by any express or implied undertaking or representationꢀ No part of this manual may be reproduced
or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without
the express written permission of BEHRINGER Spezielle Studiotechnik GmbHꢀ BEHRINGER® is a registered trademarkꢀ
ALL RIGHTS RESERVEDꢀ© 2004 BEHRINGER Spezielle Studiotechnik GmbHꢀ BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-
Schleyer-Strꢀ 36-38, 47877 Willich-Münchheide II, Germanyꢀ Telꢀ +49 2154 9206 0, Fax +49 2154 9206 4903
6ꢀ WARRANTY
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|