MICRO-AMP® System
MPS-15 and MPS-15-230 Power Supplies
MPS-15 Series power supplies are designed specifically to supply power for the Banner
MICRO-AMP series amplifiers and logic modules. They are constructed on small PC
boardsthataretrack-mountableforcompatibilitywithothertrack-mountedMICRO-AMP
components. TheMPS-15includesasocketforaMICRO-AMPamplifierorlogicmodule.
The combination of an MPS-15 series power supply and a MICRO-AMP module makes
a complete and compact sensing and/or control system.
A built-in 5-amp rated SPDT output relay is supplied for easy interfacing to an external
load or circuit. Its action is controlled by the outputs of a MICRO-AMP module which
is plugged into the on-board module socket. A switch on the PC board selects which
module output (normally open or normally closed) will activate the relay.
Two models are available. Model MPS-15 is for 120V ac operation. Model MPS-15-230
is for 220/240V ac power. Up to three MICRO-AMP modules may be powered by one
MPS-15 power supply. A 4-inch (100mm) long mounting track is supplied with each
MPS-15. Optional 6-inch (150mm) track model TR100-6 neatly accomodates the MPS-
15 Series PC board plus the PC boards of two additional RS8 sockets to form a complete
three-module MICRO-AMP sensing/logic system.
Specifications
SUPPLYVOLTAGE: modelMPS-15isfor105to130Vac(50/60Hz); relayandtherefore takeadvantageofthe1millisecondresponsetimeof
model MPS-15-230 is for 210 to 250V ac (50/60Hz).
the module (see MICRO-AMP module specifications and hookup).
OUTPUT CONFIGURATION: SPDT electromechanical relay. COMPATIBLEMODULES: modelsMA3,MA3A,MA3-4,MA4-2,
Contact rating: 250V ac max., 30V dc max., 5 amps max. (resistive MA4G, MA4L, MA5. Donotplugmoduleswithcurrent-sourcingPNP
load). Install MOV (metal oxide varistor) transient suppressor of ap- outputs (MA3P, MA3-4P, etc.) into the socket on the MPS-15.
propriate voltage across contacts used to switch inductive loads.
POWER FOR EXTERNAL DEVICES: 40 milliamps is available
*Contact response: 20 milliseconds open and close.
to power external 10 to 30V dc devices (e.g.- two additional MICRO-
Mechanical life: 10,000,000 operations.
AMP modules or two MINI-BEAM sensors, etc.).
*NOTE: dc loads may be easily connected directly to the output(s) of OPERATING TEMPERATURE:
the MICRO-AMP module used with the chassis in order to bypass the -40 to 70 degrees C (-40 to 158 degrees F).
Hookup Diagram, MPS-15 & MPS-15-230
Dimension Drawing, MPS-15 & MPS-15-230
NOTE: for hookup of sensors or inputs to the module socket,
see the hookup diagram for the module used.
Printed in USA
P?N 03356F3C
Download from Www.Somanuals.com. All Manuals Search And Download.
|