Banner American Products Work Light 150 3M User Manual

LED..I150-3.. Low-Angle LED Ring Lights (150 mm)  
Non-Diffused Lighting for Increased Close-Up Contrast  
Features  
• 150 mm LED ring light for low-angle illumination. See Banner’s website at  
www.bannerengineering.com for a complete lighting tutorial.  
• Uses 3 tiers of LEDs mounted at 75° to the optical axis.  
• Low-angle light enhances contrast of surface defects, etching, and embossed marks.  
• Well suited for dot-peened or pin-stamped data matrix marks.  
• Solid-state LED light source.  
• Continuous or strobed operation is selectable via sensor software.  
• Black anodized aluminum housing with ¼ - 20 threaded mounting holes.  
• The suggested field of view is 80 mm in diameter and the suggested stand off  
is 12.5 mm.  
Models  
Supply Voltage  
and Current  
Models*  
LEDRI150-3W  
LEDII150-3W  
Illumination  
Color  
Cable/Connector  
Visible Red  
640 nm  
24V dc 10% @ 500 mA max.  
3-conductor, 2 m (6.5')  
attached cable with flying  
leads (see wiring table)  
Infrared  
880 nm  
24V dc 10% @ 350 mA max.  
24V dc 10% @ 500 mA max.  
High-intensity,  
low-angle light  
Visible Red  
640 nm  
2 m (6.5') pigtail with  
3-pin, 8 mm male  
Pico-style connector  
(direct connection to  
PresencePLUS P4)  
LEDRI150-3M  
LEDII150-3M  
Voltage supplied by PresencePLUS sensor,  
if operating at 24V dc (see sensor manual).  
24V dc 10% @ 350 mA max.  
Infrared  
880 nm  
Voltage supplied by PresencePLUS sensor,  
if operating at 24V dc (see sensor manual).  
*For 9 m (30') cable, add suffix “W30” to the model number (e.g., LEDRI150-3W W30).  
Specifications  
Useful Life  
When operated within specification, output will decrease less than 20% after 20,000 hours and less than 30%  
after 30,000 hours.  
NOTE: Actual useful life of strobed lights depends on duty cycle.  
Environmental Rating  
Operating Conditions  
IEC IP0; NEMA 0  
Temperature: 0° to +50° C (+32° to 122° F)  
Maximum relative humidity: 90% at 50° C (non-condensing) max.  
Cleaning Instructions  
Certifications  
Regularly remove any dust and dirt from the light source. Blow off dust using anti-static compressed air.  
Printed in USA  
11/06  
P/N 127582 rev. A  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3Com Switch DUA1750 2BAA01 User Manual
Acer Computer Monitor M190E5 L0A User Manual
ADC Network Card D3LXC SCA100 User Manual
Aga Ranges Range U104001 03 User Manual
Allied Telesis Switch AT FH812U User Manual
Alpine Car Video System TME M750 User Manual
Atlona TV Mount AT 80120HD User Manual
Avenview TV Converter Box C HDMI DVIA User Manual
Bakers Pride Oven Microwave Oven VGH Series User Manual
Beko DVD Player DVD 2006 User Manual