DVB–T/S
Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
3
Daily use, 4
Find out how to use the Beo4 remote control with the DVB–T/S Module. How to
bring up and use the menus on the screen.
See programme information, 6
How to bring up and use the Programme Guide and information display, which
options are available from the Programme Guide and information display on the
screen.
Timer recording, 8
How to program a recording directly from the Programme Guide.
Setup menu, 9
Find out details about the SETUP menu; How to make your preference settings, tune
in and edit channels and stations and change your setup.
First-time setup, 13
See what the first-time setup sequence consists of.
Connections, 14
Overview of sockets, how to connect the Conditional Access Module and insert
Smart Cards.
What to do if …, 16
Find answers to frequently asked questions, such as how to find new channels or
stations, how to check the signal strength and more.
Glossary, 18
Find a list of commonly used DVB–T/S terms.
Index, 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily use
4
The Beo4 display shows the source you have
selected, or extra functions available when you
press the LIST button.
When your television is equipped
with the DVB–T/S Module, you can
receive digital satellite and terrestrial
programmes.
The Beo4 remote control gives you
access to all functions of your
television. However, only the
functions relevant to the module are
explained here, for further
DTV
0 – 9
Switch on your television and activate the DVB–T/S
module
Select channel or station numbers or menus, or
enter numbers in menus
TV
DTV
LIGHT
DVD
RADIO
CD
information about operating your
television, refer to the televisions own
Guide.
TEXT
MENU
Bring up teletext, if provided by the channel you
are currently watching
V MEM
RECORD
A MEM
Bring up the DVB–T/S menu overlay as described
on the next page. Press twice to bring up the TV
menu
7
4
8
5
2
0
9
6
Step between channels or stations or move cursor
up or down in menus
1
3
Move cursor left or right or see available options
in menus. While DTV is selected as source, you
can use the buttons to step between your
Channel/Station Groups and the Channel/Station
Lists
TEXT
MENU
GO
GO
Select and activate a function or confirm a choice
in a menu. Press and hold while watching
television via the DVB–T/S module to bring up a
Channel/Station List
LIST
EXIT
STOP
STOP
EXIT
Back up through menus
Exit menus or, for example, teletext
The coloured buttons are used as “short cuts” to
functions as described on the next page, or used
as indicated in the DVB–T/S menus
NOTE! Depending on your Beo4 version, the ‘DTV’
button may be named ‘SAT’ instead. These
buttons have the same function.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
The menu overlay
The menu overlay gives access to all the main
Press to bring up the DVB–T/S
MENU
PROGRAMME GUIDE
RADIO
PROGRAMME GUIDE
RADIO MODE
functions of the DVB–T/S module. The overlay menu overlay
MENU
INFORMATION
CHANNEL GROUPS
SUBTITLE LANGUAGES
AUDIO LANGUAGES
SETUP
contains submenus which can be accessed
1
2
3
4
5
MENU
directly by means of the coloured buttons or
the number buttons.
Press to bring up the Programme
INFORMATION
CHANNEL GROUPS
SUBTITLES LANGUAGE
AUDIO LANGUAGE
SETUP
CHANNEL LIST
Guide with information on
1
2
3
4
5
current and next programmes
In a link room, it is only possible to bring up
the menu overlay by means of the yellow
button.
Press to switch between Radio
and TV mode
CHANNEL LIST
Press to bring up or remove the
DVB–T/S menu overlay
The DVB–T/S menu overlay in TV mode.
Press to bring up information on
the programme you are currently
watching
PROGRAMME GUIDE
PROGRAMME GUIDE
TV MODE
TV
MENU
INFORMATION
STATION GROUPS
SUBTITLE LANGUAGES
AUDIO LANGUAGES
SETUP
1
2
3
4
5
MENU
INFORMATION
STATION GROUPS
SUBTITLES LANGUAGE
AUDIO LANGUAGE
SETUP
STATION LIST
Press to bring up your Channel
or Station Groups
1
2
1
2
3
4
5
Press to bring up the menu for
selecting subtitles language for
the current channel
STATION LIST
The DVB–T/S menu overlay in Radio mode.
Press to bring up the menu for
selecting audio language for the
current channel
3
4
Press to bring up the SETUP
menu. The SETUP menu is
described in more detail on
pages 9–12
Press to bring up a list of
Channels or Stations
5
Download from Www.Somanuals.com. All Manuals Search And Download.
See programme information
6
The information display appears
briefly on the screen every time you
change channels. You can also bring
up the display on the screen to see
programme information at any time.
Chosen Group
Channel name
Coded Programme
1
BBCWORLD
Morning Glory
Get the Clip
TV – MY LIST
10:50
11:10
Current time
Channel number
11:30
You can specify how long the
information display remains on the
screen, for further information, see
page 11.
Programme name (Now -
Next)
Time bar to show
elapsed time
Programme start time
You can bring up a Programme Guide
of current and following programmes
on the screen while watching TV or
listening to radio via the DVB–T/S
module. The Programme Guide
contains information about the
current and coming programmes on
all available channels or stations. You
can also change to a different
channel or station via the Programme
Guide.
To see further programme information, press the blue button while the display is shown.
Digital audio
Additional audio options
Additional subtitles
1
BBCWORLD
Morning Glory
TV – MY LIST
10:50
11:10
Morning Glory (1933) is the story of a naive and
pretentious aspiring actress, starring Katharine Hepburn in
only her third film. This RKO film, directed by Lowell
Sherman and adapted from a stage play by Zoe Akins …
When the extended display is shown on the screen and the information exceeds one page, you can scroll
down the page with the button.
Additional Subtitles and Audio options are shown by the icons at the top.
Note: This service is not offered by all channels.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
To change Subtitles or Audio options …
Press to bring up the Programme
The icons and indicate that either additional Guide
BBCWORLD
RAI 1
10:50 Morning Glory
11:30 Get the Clip
audio or subtitle options are available.
Press to move the cursor up or
down
09:55 Appuntamento al cinema
10:30 TGT 1
When no menu is shown on
the screen …
DISCOVER
CINEMA
CNN
12:10 Wonderfull world
13:00 3000 Miles through . . .
Press the yellow button to call up
the menu overlay
Press to step between ‘pages’ of
the Programme Guide
08:55 High noon
17:50 Limelight
09:00 News from today . . .
16:00 News for yesterday . . .
Press 2 to call up the Subtitles
menu, or …
2
3
Press to select a highlighted
programme
GO
DR1
09:10 Blomsterbørns børn
10:00 Aktuelt
Press 3 to call up the Audio
menu
Press to call up a 7 days list of
programmes for the selected
channel or station
GO
show epg
select
The Programme Guide.
Additional subtitles or audio options …
Several options for subtitles and audio may be
available depending on your programme provider.
English (hearing imp.)… Subtitles containing
additional information for the hearing impaired.
English … Ordinary subtitles.
Press to remove the Programme
Guide from the screen
EXIT
TV – MY LIST
BBC PRIME
THURSDAY 16 FEB
19.00 Doctors
From the 7 days list …
Press to bring up information on
a specific programme
19.30 Eastenders
20.00 No going back
20.30 Little Angels
21.00 Judge John Deed
22.30 Red Dwarf
23.50 Casualty
English (basic) … Audio without special sound
effects. English (hearing imp.) … Enhanced
sound for the hearing impaired.
Press to remove information
from the screen
EXIT
FRIDAY 17 FEB
English (commentary) … Audio containing
descriptive comments for the visually impaired.
07.00 Balamory
07.20 Teletubbies
07.45 Tweenies
08.00 News
08.30 Weather
Also the audio options may have the extension ‘A’
or ‘D’, for example, English A. ‘A’ indicates
analogue sound, whereas ‘D’ indicates digital
sound.
more info
The 7 days list.
1
BBCWORLD
TV – MY LIST
10:50 – 12:30
11:10
Morning Glory
Morning Glory (1933) is the story of a naive and
pretentious aspiring actress, starring Katharine Hepburn
in only her third film. This RKO film, directed by Lowell
Sherman and adapted from a stage play by Zoe Akins is
notable since it helped to launch the actress’ successful
career, and provided her with the first (of four) Best
Actress Oscars - the film’s only nomination. Many critics
have noted that Hepburn should have won an Oscar for
her first screen appearance in A Bill of Divorcement
(1932) a year earlier. This film is in the tradition of other
backstage dramas (such as Gregory La Cava’s …
next
add to group
record
Specific programme information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer recording
8
Timer recording …
1
BBCWORLD
TV – MY LIST
10:50 – 12:30
11:10
When the Programme Guide is
shown on the screen, you have
different options; you can
> When the programme information of the
programme you want to record is shown on the
screen press the red button.
Morning Glory
Morning Glory (1933) is the story of a naive and
pretentious aspiring actress, starring Katharine Hepburn
in only her third film. This RKO film, directed by Lowell
Sherman and adapted from a stage play by Zoe Akins is
notable since it helped to launch the actress’ successful
career, and provided her with the first (of four) Best
Actress Oscars - the film’s only nomination. Many critics
have noted that Hepburn should have won an Oscar for
her first screen appearance in A Bill of Divorcement (1932)
a year earlier. This film is in the tradition of other
backstage dramas (such as Gregory La Cava’s Stage Door
(1937)) …
programme a recording directly if a
video recorder is connected to your
television, or you can add the
channel or station in question to one
of your Groups.
> When the recording information is shown in the
menu, you can change the start and stop time
or date, if you want to.
> To accept your recording settings and leave the
menu, press GO.
When recording onto a video tape recorder such
as BeoCord V 8000, you will not be able to see
the channel or programme name when looking in
the Timer Index of BeoCord V 8000, only the
channel number*. However, if you record onto a
hard disc recorder such as HDR 1, you can see the
channel number* and the name of the
next
add to group
record
1
BBCWORLD
Morning Glory
TV – MY LIST
10:50 – 12:30
11:10
programme waiting to be recorded.
Morning Glory (1933) is the story of a naive and
pretentious aspiring actress, starring Katharine Hepburn
in only her third film. This RKO film, directed by Lowell
Sherman and adapted from a stage play by Zoe Akins …
*The channel number indicated in the Timer index
in both BeoCord V 8000 and HDR 1 is the channel
number from the main channel list.
TIMER RECORDING
START TIME
STOP TIME
DATE
11:15
12:30
TUE 18 APR
GO
accept
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup menu
9
The SETUP menu is part of the
complete menu system of the
DVB–T/S Module. The SETUP menu
contains submenus that you can use
to make your own settings, enter
information on your current satellite/
terrestrial setup and make channel or
station searches.
SETUP
CHANNELS/STATIONS (page 10)
EDIT
CHANNEL/STATION LIST
CHANNEL/STATION GROUPS
SEARCH
SIGNAL INFORMATION
OPTIONS (page 11)
LANGUAGE
MENU
The ACCESS CONTROL menu within
the SETUP menu allows you to
restrict access to particular channels
or stations.
AUDIO 1
AUDIO 2
SUBTITLES 1
SUBTITLES 2
DISPLAY DURATION
DIGITAL AUDIO
Menu items in grey cannot be selected.
CLOCK SETTINGS
REINSTALL ALL
MODULE INFORMATION
ACCESS CONTROL (page 12)
COUNTRY
PARENTAL LOCK
CA UNITS (page 12)
Illustration of the structure of the Setup menu.
The structure of the menu system may change
with new software.
In order to bring up the Setup menu for TV
channels, you must be in TV mode, and in order
to bring up the Setup menu for Radio stations,
you must be in Radio mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
>> SETUP menu
10
About Channels and Stations …
You can store up to a total of 10000 digital TV Contents of the CHANNELS and STATIONS
SIGNAL INFORMATION
channels and digital radio stations. Once you
have tuned in the channels and stations, you
can edit the Channel and Station Lists. This
means that you reduce the time you spend
looking for specific channels and stations by
rearranging the order in which they appear
in the list.
menus …
In the SIGNAL INFORMATION menu you can see
various information about the signal received from
the provider:
EDIT
CHANNEL or STATION LIST … Delete inactive
channels or stations from the lists. Note that
active channels or stations are added again by
the broadcaster when information is updated.
View channel or station information.
CHANNEL or STATION GROUPS … Add to or
remove channels or stations from Groups,
rearrange the order of channels and stations,
and name your Groups.
POSITION … See the chosen position
FREQUENCY … See the chosen frequency
NETWORK … See the chosen network
SYMBOL RATE … See the chosen symbol rate
SERVICE ID … See the channel ID.
SIGNAL QUALITY … Shows the quality of the
received signal.
You can make up to ten different Channel
and ten Station Groups containing only the
channels or stations you choose, and you can
name each of these Groups. Each Group can
contain up to 99 channels or stations.
SIGNAL STRENGTH … Shows the strength of the
received signal.
SEARCH
In the CHANNEL or STATION LISTS, the coloured
In the SEARCH menu, you set your preferences for buttons offer you several options. For example
a channel or station search:
you can sort you channels or stations
POSITIONS … Select which position (terrestrial or
satellite) you wish to search from, hide* or
show positions in the list or edit position
information– Use the “edit” function to change
the settings for a chosen position. For example
you can choose to switch the active antenna on
alphabetically or by channel or station number
using the ‘123/abc’ function. The default setting
for viewing channels or stations in the Lists is by
channel or station numbers. You can view
information for each channel.
or off (terrestrial) or which DiSEqC switch to use *If you hide a position in use, all channels and
(satellite) and you can choose a test channel.
The test channel shows images if the setup is
correct.
stations received from this position will disappear
from your channels and stations lists and your
groups. However, if you start a search in a
position, you have previously hidden, the position
is made available automatically.
SEARCH FILTER … Select whether to search for all
channels or free-to-air channels only.
SEARCH MODE … Select either automatic or
manual search.
FREQUENCY … If you have chosen manual search,
you can enter a search frequency.
SYMBOL RATE … If you have chosen manual
search, you can set a symbol rate value.
NETWORK SEARCH … If you have chosen manual
search, you can search for all channels and
stations found in a specific network by choosing
‘YES’.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
About the OPTIONS menu …
In the OPTIONS menu, you set up your
personal preferences for the DVB–T/S
Module. You can select a menu language to
be used in the module menus. When you
select a preferred language for audio and
subtitles, this language will be used when
available from the programme provider.
Contents of the OPTIONS menu …
CLOCK SETTINGS
MODE … Select MANUAL to be able to choose
the set of channels with which you want to
synchronize the clock. Select AUTOMATIC to let
the system set the clock
LANGUAGE
MENU … Select the language to be used in the
satellite menus.
AUDIO 1 … Select the preferred audio language
to be used, if available from the programme
provider
POSITION … If you have selected MANUAL*, you
must select an enabled position.
CHANNELS … If you have selected MANUAL*, you
must select a set of channels with which you
want to synchronize the clock.
If you choose to reinstall all your TV channels
and radio stations, you must note that all
changes you have made in CHANNEL and
STATION LISTS and all your GROUPS are
deleted.
AUDIO 2 … Select the audio language to be used
if your first choice is not available.
SUBTITLES 1 … Select the preferred subtitle
language to be used, if available from the
programme provider.
REINSTALL ALL
In this menu you can reinstall all channels and
stations. Note that this will delete the settings you
have made for CHANNEL and STATION LISTS and
GROUPS.
SUBTITLES 2 … Select the subtitle language to be
used if your first choice is not available.
DISPLAY DURATION
Select how long the information display should
remain on the screen.
MODULE INFORMATION
Use this menu to see the current module version,
model and release date.
DIGITAL AUDIO
Select if the satellite module should automatically *If you choose to set the clock manually, a banner
transmit digital audio. However, the default
setting from the factory is MANUAL as many
programme providers do not transmit digital
audio sound. You can still change to digital audio
when watching a programme transmitted with
digital audio. Look for the icon in the information
display, see page 7.
will be displayed every time you switch on the
DVB–T/S module informing you that the clock is
being set.
Download from Www.Somanuals.com. All Manuals Search And Download.
>> SETUP menu
12
About the ACCESS CONTROL and CA UNITS menus …
The ACCESS CONTROL menu allows you to
lock specific TV channels or radio stations.
Contents of the ACCESS CONTROL menu …
COUNTRY … Select which country you are in in
Should you forget your code …
If you forget your access code, enter the ACCESS
order to receive the correct programme provider CONTROL menu and key in ‘9999’ three times.
When you enter the EDIT CHANNEL LIST or
EDIT STATION LIST menus, you can lock (and
later unlock) channels and stations in the lists
to avoid others from watching these channels
or listening to these stations. Select the
channels or stations you wish to lock. If a
channel or station is present in, for example,
more than one GROUP and you lock it in the
CHANNEL or STATION LIST, it will be locked in
all groups automatically. Whenever you try to
access locked channels or stations, you are
asked to key in your access code.
lists*.
The Access Control is then disabled and you must
enable the code again and enter a new personal
code.
PARENTAL LOCK … Enable the access code, then
enter and confirm the code. You can lock the
channels and stations you wish when you bring
up the EDIT CHANNEL/STATION LIST menus
and bring up information on the chosen
channel by means of the yellow button. When
you lock the channel, you can also set the time
period you want the lock function to be
activated. If you do not change the time period,
it is locked all the time.
Note: The access code described here is not the
same as the pincode you may receive with your
Smart Card. For information about Smart Card
pincode, consult information from your
programme provider.
Contents of the CA UNITS menu …
CA UNITS … Use this menu to access the inserted
CA Module or card. The contents of the menu
depends on your programme provider.
*Programme provider lists are sent out by some
programme providers. They appear and function
in much the same way as Groups and can be
brought up and seen just like Groups.
From the factory, Access Control is not
activated. In order to use the Access Control
function, you must enable the access code.
You can then select the specific channels or
stations that should be locked.
The access code system of the DVB–T/S
Module is not the same as the pincode system
for your television, but it may be easier for
you, if you choose to use the same code for
both systems.
Download from Www.Somanuals.com. All Manuals Search And Download.
First-time setup
13
What’s on the FIRST-TIME SETUP menus …
MENU LANGUAGE … Select your preferred
language for the menus shown on the screen
from the list of available languages.
COUNTRY … Select your country from the list of
available countries. This will affect the channels
and stations offered to you by your programme
provider.
When your television is equipped
with the DVB–T/S module and you
switch on the source DTV for the very
first time, you are guided through the
First-time setup sequence.
DANSK
DEUTSCH
ENGLISH
ESPAÑOL
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
POSITIONS – antenna configuration
Make the settings corresponding to your
particular aerial setup.
The default settings for the EDIT POSITION
menu are:
Language selection menu.
Thor on DiSEqC 1
Sirius on DiSEqC 2
SEARCH
-
HOTBIRD 13.1
Hotbird on DiSEqC 3
Astra on DiSEqC 4
FREQUENCY: 12.616 GHz V
You can choose different positions, if the ones
offered do not match your setup.
SEARCH … Now you can make an automatic
search of all enabled positions.
IRIB1/IRIB2
IRIB5/IRIB4
IRIB3/IRIB6
RTM 1
RADIO WEB ITALIA
R.Reparter 1 Xpd 70
3 ABN Radio Xpd 70
KITT Radio
Note: If you do not have a DiSEqC switch and
therefore set both DiSEqC 1 and DiSEqC 2 to 0,
you are asked to check your settings before
searching.
Search menu.
All settings you make during first-time setup can
be changed via the menus at any time.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
14
The installation of satellite dishes,
terrestrial antennas and cables is not
described in this Guide as we expect
this to be done by an installer.
LNB and antenna
The illustrations to the right show how to
connect your SAT antenna and the terrestrial
antenna to your television.
The CA Module is the module, you
can insert in one of the slots on your
television, for information on the
placement of these slots, refer to
your televisions own Guide. The
module acts as ‘card reader’ for your
Smart Card which decode the
encoded signals sent out by the
programme provider.
Only uncoded digital satellite programs, also
known as ‘free-to-air’ programs, are available
without Smart Cards or CA Modules.
ANT
Connect your LNB and terrestrial antenna to the
available aerial sockets on your television.
The DVB–T/S module is equipped
with a CONAX CA module and you
can insert your chosen Smart Card in
this module directly.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
About Smart Cards …
If you want to watch coded programs, you
have to contact a programme provider. The
programme provider will register you as an
authorised viewer, usually requiring payment
of a fee. You will then be provided with a
Smart Card. Note that a Smart Card is only
valid for one programme provider and
CA Module
Smart Card
therefore only works with certain programs.
Smart Cards and CA Modules may also give
access to special menus which are not described
in this Guide. If this is the case, follow the
instructions from your programme provider.
In order to view a coded service, you need to
have a valid Smart Card.
Insert the Smart Card carefully into the
CA Module.
The module must be inserted with the front facing
up.
Note: Insert the Smart Card with the gold coloured
chip facing as described in the instructions provided
with the CA Module.
In the other slot, you can insert a Smart Card
directly into the built-in CA Module.
Contact your Bang & Olufsen retailer for
information about compatible CA Modules.
Insert the Smart Card in the built-in CA-Module so
the gold coloured chip faces upwards.
NOTE! Smart Cards and or CA Modules are
distributed from your programme provider. The
cards must remain in the CA Modules, unless your
programme provider asks you to remove it. This is
important in case your programme provider
wishes to send new information to your Smart
Card.
Download from Www.Somanuals.com. All Manuals Search And Download.
What to do if …
16
If …
Then …
The table to the right describes some
of the situations you may experience
with the DVB–T/S module, and what
to do to resolve these situations.
You hear of a new channel or
station and wish to find it …
Check for information from the programme provider and make a
channel search.
Bring up the DVB–T/S SETUP menu>CHANNELS>SEARCH. Note
that when you find new channels or stations, they will be placed
under the relevant programme provider.
When you choose a channel
number, the screen is black …
The programme provider has probably moved the channel or
station. Check for information from the programme provider
and do a manual search for a specific channel or station if you
have information about, for example, a new frequency.
Otherwise make an automatic channel or station search.
Bring up the DVB–T/S SETUP menu>CHANNELS>SEARCH.
Note that when you find new channels or stations, they will be
placed under the relevant programme provider.
When you choose a channel
It could be that you have selected a channel that does not
broadcast around the clock. When no programme is broadcast,
number, the information display
shows “CHANNEL NOT FOUND” … the information display will show ‘CHANNEL NOT FOUND”.
You want to store the channel Bring up the third level of programme information and press the
you are currently watching or the yellow button to add the current channel or station to a Group
station you are currently listening and follow the instructions in the menus.
to in a Group …
You want to use satellite as the
source in a Timer Play …
Follow the procedure described in the User’s Guide for your
television.
Choose DTV or DTV-RADIO as the source of your Timer Play.
You have forgotten your code for Bring up the DVB–T/S SETUP menu>ACCESS CONTROL and
access control … enter ‘9999’ three times (for further information see page 12).
You wish to add a satellite to the Contact your Bang & Olufsen retailer.
already preset, available
satellites …
You want to restrict the access to Bring up the DVB–T/S SETUP menu>ACCESS
certain channels or stations,
(ACCESS CONTROL) …
CONTROL>PARENTAL LOCK.
Enable the access code. In the channels or stations lists you
select the channels or stations that should be ‘locked’ (for
further information, see page 12).
You have deleted channels or
stations from the lists but they
reappear …
Active channels and stations cannot be deleted from the total
lists, only inactive channels or stations can be deleted. If you
delete active channels or stations, they will reappear in the lists
when the broadcaster sends out information again.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
If …
Then …
There is no signal, the picture is
poor, or several channels or
stations are missing …
a) Check the signal strength and quality in the DVB–T/S SETUP
menu>SIGNAL INFORMATION (for further information, see page
10).
If the strength and quality is too poor, check you LNB installation
or contact your installer.
b) Check that your Smart Card is still valid and updated.
Channels with the preface SID
and a number appear in your
Channel List …
If you have carried out at manual search, you may have found
“hidden” channels. These channels are identified with the Service
ID number in the Channel List (SID XX). The channels are used
by some programme providers to send out for example a
football match on different channels, each with its own camera
angle. The channels transmit the same programmes at the same
time.
There is no picture when you
switch to DTV or the system
Switch your television to standby and wait until the standby
indicator turns red, then switch on again.
seems to ‘lock’ on one channel … If the problem persist, disconnect your system from the mains
and check connections, then reconnect to the mains.
If this does not solve the problem, contact your Bang & Olufsen
retailer.
There is no sound while watching If the module is set up for automatic reception of digital audio
a programme …
and the programme is broadcast without digital audio, there is
no sound in the speakers.
Bring up the DVB–T/S SETUP menu>OPTIONS>DIGITAL AUDIO.
Change the setting from ‘AUTOMATIC’ to ‘MANUAL’. You can
still change to digital audio when watching a programme
transmitted with digital audio (this can be seen from the icon
at the top of the Information display).
Groups appear in the Groups list, Some programme providers send out ‘programme provider lists’
that you have not created …
(see page 12) which appear in the DVB–T/S module as groups, if
you do not use these groups you can chose to “hide” them via
the EDIT GROUPS menus. Bring up the menu overlay and select
1 for CHANNEL GROUPS/STATION GROUPS>hide. (for further
information, see page 10).
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
18
Term
Explanation
Access Control
Allows user to set a password to control access to programmes
based on channel, rating (based on the motion picture rating
system) or content.
Conditional Access
A system for restricting access to a particular service to
authorised users only (e.g. subscribers to a particular digital
bouquet, purchasers of individual pay-per-view events), by
means of encryption and authorised decoding.
Conditional Access Module
(CA Module)
Decrypting and descrambling module that acts as card reader for
Smart Cards.
DiSEqC switch
The DiSEqC switch enables the user to select one LNB signal
between different LNBs. You can control up to 16 LNBs in total.
DVB – Digital Video Broadcasting Broadcast standard for digital radio and television, using MPEG II
compression.
DVB-S – Digital Video
Broadcasting- Satellite
Digital Video Broadcasting: A coherent set of European
standards for transmission and reception of digital television
signals. Although European, the standards have been adopted in
many countries worldwide. There are many standards within the
DVB family, including specifications for satellite (DVB-S), cable
(DVB-C) and terrestrial (DVB-T) transmission and reception.
DVB-T – Digital Video
Broadcasting- Terrestrial
Frequency
Physical quantity, indicates the number of cycles per second,
measured in Hertz (Hz).
LNB (Low Noise Block down-
Converter)
Converts microwave frequency blocks to the intermediate
frequency range covered by the tuner.
Polarity
For better utilisation of the available frequency bands, the
satellites transmit adjacent programmes, with opposite polarity
(horizontal and vertical). Reception of both horizontal and
vertical polarity is covered by the universal LNB.
Programme Guide or Electronic
Program Guide (EPG)
This interactive feature allows the user to access and scroll
through complete programme listings covering now and next
programmes on the television screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Term
Explanation
Programme provider
Company or corporation that supplies audio or video
programmes via satellite.
Smart Card
A removable credit-card-sized plastic card issued by a
programme provider. The card is necessary to receive coded
programmes.
Symbol Rate
The rate at which the transmitter is sending information. The
symbol rate specifies how many symbols per second are carried
across the channel (phone line, serial cable or satellite
transponder),
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
20
Access Control
LNB/Aerial setup
Activate the ACCESS CONTROL system, 12
Change or delete your ACCESS CONTROL
code, 12
Connections, 14
Settings in the Setup menu, 9–12
If you have forgotten your ACCESS CONTROL
code, 12
Pincode
Activate the ACCESS CONTROL system, 12
Change or delete your ACCESS CONTROL
code, 12
Beo4 remote control
Introducing the Beo4 remote control, 4
If you have forgotten your ACCESS CONTROL
code, 12
Connections
Information display
Aerial connection, 14
Insert CA Module and Smart Card, 15
Information display and extended
information display, 6
Set the display duration, 11
Groups
Create Groups of channels or stations, 10
Move channels or stations within a Group, 10
Name a Group, 10
Programme guide
Bring up the Programme Guide on the
Select a Group, 4–5
screen, 7
Language
Channels and stations
Choose audio language, 11
Change audio type or language, 7
Choose menu language, 11
Choose subtitle language, 11
Add new TV channels or radio stations, 10
Bring up a CHANNEL LIST, STATION LIST or
GROUP LIST, 5
Re-install channels and stations, 11
Remove tuned channels and stations, 10
Select a channel or station, 4
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Radio/TV mode
Switch between Radio and TV mode, 5
Recording
Make a timer recording from the Programme
Guide, 8
Setup menu
Overview of the DVB–T/S SETUP menu, 9
Sound
Audio options, 7
Change audio type, 7
Choose audio language, 11
Digital Audio, 7 and 11
Subtitles
Change subtitle type or language, 7
Choose subtitle language, 11
Tune
Remove channels or stations, 10
Re-install channels or stations, 11
Tune in new DVB–T/S TV channels or radio
stations, 10
Download from Www.Somanuals.com. All Manuals Search And Download.
22
For your information …
Til det norske marked!
Your needs as a user are given careful
consideration during the design and
This product fulfils the conditions
stated in the EEU directives 89/336
and 73/23.
Mekaniske og elektroniske komponenter i
produktene slites ved bruk. Det må derfor påregnes development process of a Bang & Olufsen
reparasjoner og utskiftning av komponenter innen- product and we strive to make our products
for kjøpslovens reklamasjonstid, som må regnes
som vedlikehold av produktene. Slik vedlikehold
gir ikke grunnlag for å rette mangelskrav mot for-
easy and comfortable to operate.
Therefore, we hope that you will take the
handler eller leverandør, og må bekostes av kjøper. time to tell us about your experiences with
your Bang & Olufsen product. Anything
which you consider important – positive or
negative – may help us in our efforts to
refine our products.
Thank you!
Write to: Bang & Olufsen a/s
Customer Service
Peter Bangs Vej 15
DK–7600 Struer
or call/fax: Bang & Olufsen
Customer Service
+45 96 84 45 25 (phone)
+45 97 85 39 11 (fax)
or email via: www.bang-olufsen.com
Technical specifications, features and the use
thereof are subject to change without notice.
3507859
0605
Printed in Denmark by Bogtrykkergården a-s, Struer
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|