Avenview TV Cables FO HDM XX MM User Manual

HDMI Extender over Fiber Optic Cable  
Model #: FO-HDM-XX-MM  
© 2010 Avenview Inc. All rights reserved.  
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with  
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any  
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in  
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products  
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.  
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Section 1: Getting Started  
1.1 Important Safeguards  
Please read all of these instructions carefully before you use the device. Save this manual for future  
reference.  
What the warranty does not cover  
Any product, on which the serial number has been defaced, modified or removed.  
Damage, deterioration or malfunction resulting from:  
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized  
product modification, or failure to follow instructions supplied with the product.  
Repair or attempted repair by anyone not authorized by us.  
Any damage of the product due to shipment.  
Removal or installation of the product.  
Causes external to the product, such as electric power fluctuation or failure.  
Use of supplies or parts not meeting our specifications.  
Normal wear and tear.  
Any other causes which does not relate to a product defect.  
Removal, installation, and set-up service charges.  
1.2 Safety Instructions  
The Avenview FO-HDM-XX-MM, HDMI Extender System over Fiber Optic, has been tested for conformance to  
safety regulations and requirements, and has been certified for international use. However, like all electronic  
equipment’s, the FO-HDM-XX-MM should be used with care. Read the following safety instructions to protect  
yourself from possible injury and to minimize the risk of damage to the unit.  
Do not dismantle the housing or modify the module.  
Dismantling the housing or modifying the module may result in electrical shock or burn.  
Refer all servicing to qualified service personnel.  
Do not attempt to service this product yourself as opening or removing housing may expose you to  
dangerous voltage or other hazards  
Keep the module away from liquids.  
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid  
falls or spills on to the housing, unplug the module immediately.  
Have the module checked by a qualified service engineer before using it again.  
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before  
cleaning.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
1.3 Regulatory Notices Federal Communications Commission (FCC)  
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential installation.  
Any changes or modifications made to this equipment may void the user’s authority to operate this  
equipment.  
1.4 Introduction  
Avenview FO-HDM-XX-MM Series with fiber optic cable system lets you extend digital flat panel signal up to  
100 meters (330 feet) without signal degradation by at 1080p resolution.  
-
-
-
-
-
-
High Speed and long distance transmission by Optical fiber  
Fully compatible with HDMI 1.3  
Supports 12 bit Deep Color  
Uses standard Type A HDMI receptacle  
DDC and CEC signal and 5V power line are transmitter by copper line  
HDCP Compliant  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
1.5 Model Description  
FO-HDM-XX-MM  
Model Name  
Length in Meters (5 = 5 meters, 10 = 10 meters)  
1.6 Package Contents  
Before you start the installation of the converter, please check the package contents.  
-
HDMI Optical Cable with Transmitter and Receiver  
x 1  
x 1  
-
User’s Manual  
1.7 Before Installation  
Put the product in an even and stable location. If the product falls down or drops, it may cause an  
injury or malfunction.  
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high  
humidity.  
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it  
may cause a fire.  
Do not twist or pull by force ends of the optical cable. It can cause malfunction.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
1.8 Installation  
Avenview FO-HDM-XX-MM is composed of a Transmitter converting the graphic signal of a computer to  
optical and Optical Fiber propagating the optical signal and Receiver supplying electrical signal to monitor  
converted from the optical signal to electrical signal. The Transmitter should be connected to computer and  
the Receiver should be connected to a monitor.  
Avenview FO-HDM-XX-MM is designed to self-detect the resolution of the monitor and change the resolution  
accordingly. Follow these steps for connecting to a device:  
To setup Avenview FO-HDM-XX-MM follow these steps for connecting to a device:  
1. Power on your display  
2. Connect Transmitter to the PC and Receiver to the Display.  
3. Connect the optical fiber between Transmitter and Receiver.  
4. Restart the computer.  
Use the DC power adapter (optional) with correct specification. The Transmitter which is connected to a  
computer uses power from the computer.  
Do not twist or pull by force the both ends of the optical cable. It may cause malfunction  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section 2: Specifications  
Item  
Description  
FO-HDM-XX-MM (Transmitter)  
FO-HDM-XX-MM (Receiver  
Units  
HDMI Fiber Optic Transmitter  
HDMI Fiber Optic Receiver  
Unit Description  
HDMI Compliance  
DVI Compliance  
HDCP Rev  
HDMI 1.3  
DVI 1.0  
1.1  
TMDS Signal (HDMI 1.3 Standard)  
TMDS Signal (HDMI 1.3 Standard)  
12bit Deep Color / 60Hz  
Input Signal  
Output Signal  
Video Bandwidth  
Supported Resolution &  
Distance  
Up to WUXGA (1920x1200), 1080p @ 100 meters ( 330 feet)  
4 ch 850 nm Multi-Mode VCSEL  
19 pin HDMI Plug  
50/125 µm Multi-mode glass fiber  
0.8W (max) 1.05W (max)  
4 ch GaAs PIN photo Diode  
Optical Converter  
HDMI Connector  
Fiber Type  
Power Consumption  
Bending Radius  
70mm  
1” x 2.9” x 0.8”  
Dimensions (L x W x H)  
Environmental  
32˚ ~ 104˚F (0˚ to 40˚C)  
-4˚ ~ 140˚F (-20˚ ~ 60˚C)  
Operating Temperature  
Storage Temperature  
Relative Humidity  
20~90% RH (no condensation)  
Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to  
the device. This is a stress rating only and functional operation of the device at these or any other  
conditions above those indicated in the operations section for extended periods of time may affect  
reliability.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2.1 Part List  
Item  
Description  
Q’ty  
Material  
Glass filled thermoplastic UL94V-0  
DVI-D Single Link 18 Plug  
DVI Case-Top, Bottom  
DVI Thumb Screw  
A
B
C
D
E
2
2
4
2
1
2
2
1
4
4
1
1
4
2
1
Glass filled PC UL94V-0  
SUM 24L+ABS  
PVC 55%  
Stopper  
FR-4, 1.5t UL94V-0  
PA46 UL94V-0 + C5210  
PA46 UL94V-0  
FR-4, 1.5t UL94V-0  
GaAs  
Epoxy Printed Circuit Board for Tx  
Optical Connector for VCSEL,PD  
Optical Connector for fiber  
Epoxy Printed Circuit Board for Rx  
Vertical Surface Emitting Laser Diode  
Photo Detector  
F
G
H
I
GaAs  
J
See Section 4  
4 fiber 5 copper DVI Optic Cable  
4 fiber DVI Optic Cable  
Label  
K
L
See Section 4  
Polyester-matte 3.3mil  
Polyamide 6/6  
E191362 (UL No)  
M
N
O
DC Power Jack  
DC Power Adaptor  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2.2 Power Consumption and DDC Power Requirements  
Power consumption of FO-HDM-XX-MM Transmitter and Receiver Module  
Item  
Transmitter  
Receiver  
maximum  
unit  
Watt  
Watt  
0.8  
1.05  
Transmitter module of FO-HDM-XX-MM without external power supply is operated by drawing out power for  
DDC from the computer and receiver module of FO-HDM-XX-MM cable also utilize the DDC power delivered  
via copper wire.  
If graphic board of the computer does not supply over 0.6A, 5V, FO-HDM-XX-MM cable  
may not operate normally.  
2.3 Signal Pin Assignment  
Transmitter / Receiver  
Pin  
1
Signal Assignment  
T.M.D.S. Data2+  
Pin  
9
Signal Assignment  
T.M.D.S. Data0-  
T.M.D.S. Clock+  
T.M.D.S. Clock Shield  
T.M.D.S. Clock-  
CEC  
Pin  
17  
Signal Assignment  
DDC/CECGround  
+5VPower  
2
T.M.D.S. Data2 Shield  
T.M.D.S. Data2-  
10  
11  
12  
13  
14  
15  
16  
18  
3
19  
HotPlugDetect  
4
T.M.D.S. Data 1+  
5
T.M.D.S. Data 1 Shield  
T.M.D.S. Data 1-  
6
Reserved (N.C on device)  
SCL  
7
T.M.D.S. Data 0+  
8
T.M.D.S. Data 0 Shield  
SDA  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2.4 FO-HDM-XX-MM Cable Construction  
The construction of 4 Optical Fibers and 4 Copper wires cable shall be in accordance with Figure and  
Table below:  
The Dimension of FO-HDM-XX-MM Cable  
Items  
Unit  
Specification  
Layer Stranding  
-0.203/7 (24)  
DVI Cable Make-up  
Drain Wires (Size/Stranded)  
AL-Mylar Screen Shield  
Cable Outer Diameter  
Jacket Color  
-
mm(AWG)  
-
A helically  
mm  
7.40±0.20  
-
-
FR-PVC(Orange, Blue, Black)  
If need  
Cable Marking  
Fiber Cable Construction  
Item  
Description  
Number  
4
Optical  
Fiber  
Structure  
Figure 1  
Aramid Yarn  
FR-PVC(Yellow)  
1.6mm  
Strength Member  
Material  
Outer  
Jacket  
Approx.Thickness  
Nominal Outside Diameter  
4.0±0.4mm  
10kg/km  
Approximate Net Weight  
Cable Identification  
OPTICAL HDMB CABLE  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2.4.1 Wiring Diagram  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Disclaimer  
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the  
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of  
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of  
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the  
Avenview hardware, software, or other products and documentation provided herein.  
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,  
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties  
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and  
non-infringement.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Acu Rite Weather Radio 8575 User Manual
Adder Technology Network Router AVM208MP User Manual
Addonics Technologies Network Card ST5DVRE User Manual
AEG Washer 84749 User Manual
Aiphone Welder SBX NVP User Manual
Allied Telesis Switch AT 9000 User Manual
AOC Flat Panel Television LE42H09P User Manual
Audiovox Automobile Alarm IMO 720 User Manual
Audiovox Automobile Electronics PRO 9555 User Manual
Audiovox Car Stereo System CD3720XM User Manual