Installation
Instructions
PORTSMOUTH™
DIVERTER TRIM KIT
T42043X
Series
Thank you for selecting American-Standard...the
benchmark of fine quality for over 100 years.
Certified to comply with ANSI A112.18.1
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
M965032 REV.1.3
ROUGHING-IN DIMENSIONS
ALL CONNECTIONS 1/2" NPT
51mm
(2")
66mm MAX.
(2-5/8")
LEVER
HANDLE
CROSS
HANDLE
FINISHED
WALL
70mm
(2-5/8")
71mm
(2-3/4")
42mm
(1-11/16")
57mm HOLE SIZE
(2-1/4")
41mm MIN.
(1-5/8")
FINISHED
WALL
Recommended Tools
Phillips Screwdriver
Flat Blade Screwdriver
CARE INSTRUCTIONS:
Remove as much surface dirt and film using clear
water and soft cotton cloth (as described above).
To keep your new faucet looking new, please follow
these simple care instructions:
Use any of the following to remove tough surface
film and build-up:
Mild liquid detergents
DO:
Simply rinse the faucet clean with clear water.
Dry the faucet with a soft cotton cloth.
Clear ammonia free liquid glass cleaners
Non-acidic, non-abrasive gentle liquid or fully
dissolved powder cleansers mixed according to
manufacturers directions.
DO NOT:
Do not use any abrasive cleaners, cloths, or
paper towels.
Non-abrasive liquid polishers
Do not use any cleaning agents containing
acids, polish abrasives, or harsh cleaners or
soaps.
Once clean, rinse faucet again with clear water to
thoroughly remove cleaner or polish and blot dry with
a soft cotton cloth.
Regular and routine cleaning will reduce the need for
heavy cleaning and polishing. If heavy cleaning is
required, the following procedures are recommended:
Failure to follow these care instructions may
damage the Faucet's finish.
Download from Www.Somanuals.com. All Manuals Search And Download.
|