INSTALLATION INSTRUCTIONS
Countertop Sink
Introduction: Thank you for selecting our products...products which have been the benchmarks of fine quality for
years. To help insure that the installation process will proceed smoothly, please read these instructions carefully
before you begin. Also, review the recommended tools and materials list; carefully unpack and examine your new
plumbing fixture.
!
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
NOTE: Pictures may not exactly define contour of china and components.
Recommended Tools & Materials
Basin Wrench
Tape
Measure
Adjustable Wrench
Putty Kinfe
Plumbers' Putty or
Caulking
Hacksaw
Pipe Wrench
Drill
Tubing Cutter
Saber Saw
Phillips Screwdriver
Regular Screwdriver
Channel Lock Pliers
3
1
2
Mount the faucet and drain assembly (not included)
on the sink following faucet manufacturer's
instructions. Be certain to apply a bead of sealing
putty on the underside of the drain (Part "A") in order
to ensure a watertight seal between the sink and
drain. Remove excess putty after installing drain on
sink.
Using the template provided,locate the position of
thesink. Provide proper clearance under the
countertop for the faucet supply lines, drain assembly
and the structural parts of the cabinet.
NOTE: If replacing an existing sink be certain to shut
off water supply before removing old sink.
Drill a clearance hole
inside the perimeter
line of the template.
Perimeter
of template
A
Perimeter
Cut opening around the
of template
perimeter of the
template.
© American Standard Inc. 2003
730236-100 Rev. D
Download from Www.Somanuals.com. All Manuals Search And Download.
|