AQUALYN™
COUNTERTOP SINK
VITREOUS CHINA
BARRIER FREE
AQUALYN™ COUNTERTOP SINK
• Made from vitreous china
• Self-rimming with cutout template supplied
• Front overflow
• Faucet ledge
Shown with 4801.862 Amarilis/Heritage faucet
with Triune cross handles (not included)
❏ 0475.020 Faucet holes on 8" (203mm) centers
(illustrated)
❏ 0475.920 Faucet holes on 8" (203mm) centers
• Less overflow
❏ 0476.028 Faucet holes on 4" (102mm) centers
❏ 0476.037 Faucet holes on 4" (102mm) centers
• Extra right-hand hole
❏ 0475.035 Faucet holes on 4" (102mm) centers
• Extra left-hand hole
SEE REVERSE FOR ADDITIONAL ROUGHING-IN
DIMENSIONS
❏ 0476.928 Faucet holes on 4" (102mm) centers
• Less overflow
610mm
(24)
❏ 0475.047 Center hole only
51mm
(2)
OPTIONAL
203mm
(8)
71mm
(2-13/16)
Nominal Dimensions:
518 x 441mm
(20-3/8" x 17-3/8")
175mm
(6-7/8)
FINISHED
WALL
OR
SPLASH BACK
203mm
(8)
441mm
(17-3/8)
DRAWING FOR
DIMENSIONAL
Bowl sizes:
MIN.
PURPOSES ONLY.
IT IS NOT AN EXACT
REPRESENTATION.
C/L
406mm (16") wide
254mm (10") front to back
143mm (5-5/8") deep
854mm
(33-5/8)
686mm
(27)
MIN.
518mm
(20-3/8)
152mm
(6)
MAX.
Compliance Certifications -
Meets or Exceeds the
Following Specifications:
• ASME A112.19.2M for
SEALING COMPOUND
COUNTERTOP (BY OTHERS)
10mm
(3/8)
BARRIER FREE
CLEARANCE
229mm
(9)
*
279mm
(11)
MIN.
178mm
(7)
Vitreous China Fixtures
324mm
(12-3/4)
*
SUPPLIES
AS REQ'D.
203mm
(8)
178mm
(7)
To Be Specified:
❏ Color: ❏ White ❏ Bone
❏ Linen ❏ Silver
❏ Fawn Beige ❏ Black
❏ Faucet*:
1-1/4 O.D.
WASTE
787mm (31)
854mm (33-5/8)
1-1/4 O.D.
TAILPIECE
FINISHED
FLOOR
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
*
SUGGESTED.
* See faucet section for additional models available
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
Install lavatory 864mm (34") from finished floor.
Lavatory installed 51mm (2") minimum from front edge
of countertop provides 686mm (27") knee clearance area.
J43
© 2008 AS America Inc.
Revised 2/08
Download from Www.Somanuals.com. All Manuals Search And Download.
|