Internet Radio Alarm Clock
<with Built-in WiFi>
Instructional Manual AIRMM02F
mnl M10066 Copyright © 2010 Aluratek, Inc. All Rights Reserved.
aluratek.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Table of Contents
Chapter 1: Introduction ..................................................................... 04
1.1 Overview ................................................................................... 04
1.2 Features .................................................................................... 05
1.3 Requirements............................................................................ 05
1.4 Package Contents..................................................................... 05
1.5 Product Application ................................................................... 06
1.6 Unit Functions ........................................................................... 07
1.7 Remote Functions .................................................................... 07
Chapter 7: Misc. ................................................................................. 43
7.1 Clock Setting ............................................................................ 43
7.1.1 Time Setup - Manually ........................................................... 44
7.1.2 Time Setup - Auto-Sync (NTP)............................................... 45
7.1.3 Time Display Format .............................................................. 45
7.2 Alarm Setting ............................................................................ 46
7.3 Backlight Setting ....................................................................... 48
7.4 Equalizer Setting ....................................................................... 48
Chapter 2: Getting Started ................................................................ 08
2.1 Hardware Installation................................................................. 08
2.2 Software Installation.................................................................. 08
Appendix A: Listen to Music via WMP 11 ........................................ 49
Appendix B: Listen to Music via WMC 2.0....................................... 57
Technical Support .............................................................................. 61
Radio and TV Interference Statement .............................................. 62
Warranty.............................................................................................. 63
Chapter 3: Configuration................................................................... 09
3.1 Configure as an Wireless Client ............................................... 09
3.2 Configure as a Wired Client ...................................................... 14
3.3 Configure as a Wireless Access Point (AP Mode) .................... 19
Chapter 4: Listen to Various Music .................................................. 22
4.1 Listen to Internet Radio ............................................................. 22
4.2 Listen to FM Radio .................................................................... 26
4.3 Listen to Music in Your Computer.............................................. 28
4.4 Listen to the Music in Your USB Drive....................................... 31
4.5 The Playback Screen ................................................................ 33
4.6 How to Add Stations Thru the Web Portal................................. 34
Chapter 5: Setup RSS ....................................................................... 36
5.1 How to Run RSS ....................................................................... 36
5.2 How to Subscribe RSS by Utility ............................................... 38
Chapter 6: Advanced Tools ............................................................... 40
6.1 Network Setting ........................................................................ 40
6.2 Configure Network .................................................................... 40
6.3 Reset to Default ........................................................................ 40
6.4 Clear Favorites.......................................................................... 41
6.5 Device MAC Address ................................................................ 41
6.6 Firmware Version ...................................................................... 41
6.7 Firmware Upgrade .................................................................... 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: Introduction
1.1 Overview
Chapter 1: Introduction
1.2 Features
• Choose between more than 11,000+ radio stations worldwide via
built-in vTuner with no monthly cost
• Search music by genre, i.e. classic, pop, talk, news, sports etc.
and geographically over 150 countries
• Compatible with universal Plug-n-Play audio servers such as:
Microsoft Media Player 11 (WMP11), Microsoft Media Connect
and MusicMatch Jukebox
• Wireless access WIFI 802.11 b/g, Ethernet and USB 2.0
(host only) connectivity
Thank you for choosing Aluratek’s® Internet Radio Alarm Clock with
Built-in WiFi. Once I’m connected to the internet you will have access to
11,000+ live streaming internet radio stations from around the globe at
your fingertips.
This includes any music genre you can think of including talk, sports and
local news from over 150 countries.
That’s pretty much free music for life playing from any room in your
home or office.
• Built-in FM radio tuner for local FM broadcast service
• Access music files stored on a USB 2.0 flash drive, MP3 player
or Hard drive through the unit’s USB port
Just use your exisitng WiFi and internet connection. If you have internet
you are all set!
• Alarm clock function with 2 programmable alarms wakes you up to
internet radio, FM radio, digital music, or alarm tone
• Integrated amplifier: 2x2W stereo
In addition to making sure only quality materials are used for manufac-
turing, Aluratek® is also dedicated to provide the best customer satisfac-
tion and support.
• External plug for headsets (3.5mm)
• 2 RCA plugs (Stereo Lineout) for external speakers
• No PC is required
• 1 Year limited warranty
The goal of Aluratek is to embody “Simple Elegance” in every product
it designs, manufactures and sells.
1.3 Requirements
• Wired / wireless router
• Internet connection
The product focus of Aluratek is to bring simple yet elegant connectiv-
ity solutions to the consumers to enhance their consumer electronics,
communications and computing experience. Each product is carefully
designed with the consumer in mind. Each product is solution-driven to
address the need of the consumers and deliberately planned to provide
the ultimate user experience.
1.4 Package Contents
Your order has been carefully packaged and inspected. The following
should be included in your package. Please inspect the contents of the
package to ensure that you have received all items and that nothing has
been damaged. If you discover a problem, please contact us immedi-
ately for assistance.
Read this guide thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the unit and / or any of
the devices it connects to.
• WiFi Internet Radio
• Remote Control
• Power Adaptor
• Instructional Manual / CD
• Quick Start Guide
• Warranty / Registration Card
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Chapter 1: Introduction
1.5 Product Application
Chapter 1: Introduction
1.6 Unit Functions
Function select
Scroll the wheel to select the
function, and press it once to
confirm/enter.
PLACE IN ANY ROOM IN YOUR HOME
1
Bedroom
Kitchen
Home Office
Backyard / Patio
Play / Pause music
Volume control
Press this button once to play/
pause the select station.
Scroll the wheel to change the
volume.
Back
Press the ‘back’ key to go
back to the previous menu.
Integrate the AIRMM02F
into your home theater
system via the RCA jacks
Option
This key has various functions
that are listed in menu such
as Stop playing music, go to
favorite etc.
USB Port
C
1.7 Remote Functions
A
Power-standby / power on
OK-OK
Built-in WiFi
Light-change the brightness Vol+-Volume up
of the display
Radio IP-Go to Internet
Radio
Media Player-Go to Media
Server
Vol--Volume down
Prev-Prev song
Next-Next song
1~0-Numeric or alphabet
input
B
MP3 Reader-Go to MP3
player
Mute-Mute
STOP-Stop playing
music
ZZZ-Snooze
LISTEN
2
REW-Rewind
Play/Pause-Play/Pause
FWB-Forward
- up
- down
- left
Favorite- add to My
favorite
Shuffle-shuffle music
OR
OR
A
B
C
Stream Internet Radio
from your WiFi / wireless
802.11 B / G router.
Connect your local
Plug in any USB Drive
and listen to your music
files. (USB port on top)
CAT5 Ethernet cable to
stream Internet Radio.
- right
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Chapter 2: Getting Started
2.1 Hardware Installation
Chapter 3: Configuration
There are three modes of network configuration for AIRMM02F. It can be a
wireless client, a wired client, or even a wireless access point (Wireless AP).
Please make sure you already have a wired/wireless router setup
before setting up AIRMM02F.
3.1 Configure as an Wireless Client
Step 1. Power on:
Plug in the power adapter and press the power switch to power on
AIRMM02F
The factory default mode is the client Mode. According to the availability
of an Ethernet cable, the device will automatically select a suitable client
mode to operate. User can also manually change the setting of network
configuration through the Setup menu “Setup/Advanced Setup/Configure
Network”.
Step 2. Connect to Wi-Fi Router from AP lists
If you have a router with Wi-Fi function, AIRMM02F will automatically
find the available AP lists for you to select. (See Chapter 3.1 to do the
detailed setup)
If there is an existing 802.11b/g wireless network in your home, this will
be simplest mode to connect AIRMM02F to the existence network.
User just have to power on the device, with no Ethernet cable plugged
in, the device will automatically go into the wireless client mode and
look for all available wireless APs (Access Points). To connect for the
first time, you will need to select the AP to connect and set the correct
encryption key. Once the setting is finished, the device will save the
related settings and connect to the designated AP when it is power on.
However, if there is problem connecting to the designated AP, the device
will show the AP list screen for user to configure again.
Step 3. Connect to wired Router
If you want to connect to your router (AP) by a RJ45 cable, you can go
to Setup / advance setting / configure network to wired client/ AP mode.
(See Chapter 3.2 to do the detailed setup)
2.2 Software Installation
AIRMM02F can work as a stand-alone device or as a media streamer
of a media server. As a stand-alone unit, you can use it to listen to
Internet radio, FM radio, and external USB storage/MP3 players. No
computer is needed.
First time using device without an Ethernet cable plugged in:
Instructions
Screenshot
Go to next
screen
Notes
1.
2.
Aluratek
Initial screen
For digital music files that are stored in your computer, you need to
install streaming server software in the computer so that AIRMM02F
can request the streaming service from that server.
Device is running
as a Wireless
Client.
“►” button or
“OK” button or
press the right
rotary wheel.
AIRMM02F is compliant to UPnP protocol. It works with media server
software such as Microsoft Windows Media Player 11 (WMP11),
Microsoft Media Connect 2.0 (WMC2.0), and Musicmatch Jukebox.
Once you have the software installed on the computer, you can stream
your music collection to AIRMM01F.
3.
“►” button or
“OK” button or
press the right
rotary wheel.
Select the MMI
language
Please find Appendix A and B for instructions on how to connect
AIRMM02F to your computer via WMP11, and WMC2.0.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
9
Chapter 3: Configuration
Chapter 3: Configuration
First time using device without an Ethernet cable plugged in (cont.):
First time using device without an Ethernet cable plugged in (cont.):
Instructions
Screenshot
Go to next
screen
Notes
Instructions
Screenshot
Go to next
screen
Notes
4.
5.
“►” button or
“OK” button or
press the right
rotary wheel.
Select the internet
radio menu lan-
guage.
10.
11.
12.
Apply new
settings.
Scanning for
available APs.
“▼” button
(1 times) or
rotate right
rotary wheel
clockwise.
The device is
connected to your
network.
6.
“►” button or
“OK” button or
press the right
rotary wheel.
Select the AP
that you can
connect to your
router device.
You can use the
numeric/ alphabet
keypad on remote
control to input
7. Numeric key
“OK” button or
press the right
rotary wheel.
pads
the WEP key, or
you can use the
option button to
change the abc/
ABC/123/~!# input.
Note: Case sensitive.
8.
9.
“►” button or
“OK” button or
press the right
rotary wheel.
“►” button or
“OK” button or
press the right
rotary wheel.
Confirm to the
settings above.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
11
Chapter 3: Configuration
Chapter 3: Configuration
Manually configured as the Wireless Client Mode:
Manually configured as the Wireless Client Mode (cont.):
Instructions
Screenshot
Go to next
screen
Notes
Instructions
Screenshot
Go to next
screen
Notes
You can use the
numeric/ alphabet
keypad on remote
control to input
the WEP key, or
you can use the
option button to
change the abc/
ABC/123/~!# input.
Note: Case sensitive.
1.
2.
3.
4.
“OK” button or
press the right
rotary wheel.
Initial screen
7.
“OK” button or
press the right
rotary wheel.
“
“ button
“►” button or
“OK” button or
press the right
rotary wheel.
(4 times) or
rotate right
rotary wheel
clockwise.
“▼” button
(1 times) or
rotate right
rotary wheel
clockwise.
8.
9.
“►” button or
“OK” button or
press the right
rotary wheel.
“►” button or
“OK” button or
press the right
rotary wheel.
Confirm to the
settings above.
“►” button or
“OK” button or
press the right
rotary wheel.
Manually select
the wireless
client mode.
Apply new
settings.
5.
Scanning for
available APs.
10.
11.
The device is in
wireless client
mode now.
Please select
WPS Disable if
your router does
not gave this
function.
The device is
connected to
your network.
6. “▼” button
(1 times) or
rotate right
rotary wheel
clockwise.
“►” button or
“OK” button or
press the right
rotary wheel.
Select the
desired AP to
connect
Download from Www.Somanuals.com. All Manuals Search And Download.
12
13
Chapter 3: Configuration
Chapter 3: Configuration
3.2 Configure as a Wired Client
First time using device with an Ethernet cable plugged in: (cont.)
Instructions
Screenshot
Go to next
screen
Notes
If there is no 802.11b/g wireless network in your home, and only wired
802.3 network is available, AIRMM02F can also connect to the wired
network through an Ethernet cable.
6.
7.
8.
In this situation, prior to power on the device, you have to plug the Eth-
ernet cable into the RJ45 connector. And then power on the device. The
device will automatically go into the wired client mode when it detects a
link status through the Ethernet connection during device startup.
“
“ button
“►” button or
“OK” button or
press the right
rotary wheel.
(5 times) or
rotate right
rotary wheel
clockwise.
First time using device with an Ethernet cable plugged in:
“▼” button
(1 times) or
rotate right
rotary wheel
clockwise.
“►” button or
“OK” button or
press the right
rotary wheel.
Instructions
Screenshot
Go to next
screen
Notes
Aluratek
Initial screen
1.
2.
9. “▼” button
(1 times) or
rotate right
rotary wheel
clockwise.
“►” button or
“OK” button or
press the right
rotary wheel.
“►” button or
“OK” button or
press the right
rotary wheel.
Device is running
as a Wireless
Client.
“►” button or
“OK” button or
press the right
rotary wheel.
Select the inter-
net radio menu
language.
3.
4.
5.
10. “▼” button
(1 times) or
rotate right
“►” button or
“OK” button or
press the right
rotary wheel.
rotary wheel
clockwise.
“►” button or
“OK” button or
press the right
rotary wheel.
11.
12.
“►” button or
“OK” button or
press the right
rotary wheel.
Press STOP on
remote control
Download from Www.Somanuals.com. All Manuals Search And Download.
14
15
Chapter 3: Configuration
Chapter 3: Configuration
First time using device with an Ethernet cable plugged in: (cont.)
Manually configured as Wired Client Mode:
Instructions
Screenshot
Go to next
screen
Notes
Instructions
Screenshot
Go to next
screen
Notes
“►” button or
“OK” button or
press the right
rotary wheel.
Initial screen
13.
14.
15.
16.
“►” button or
“OK” button or
press the right
rotary wheel.
1.
2.
3.
The device is in
“
“ button
“►” button or
“OK” button or
press the right
rotary wheel.
(4 times) or
rotate right
rotary wheel
clockwise.
wired client mode
now. It is connect-
ed to your network.
Device runs as
a Wired Client.
“▼” button
(1 times) or
rotate right
rotary wheel
clockwise.
“►” button or
“OK” button or
press the right
rotary wheel.
4. “▼” button
(1 times) or
rotate right
rotary wheel
clockwise.
“►” button or
“OK” button or
press the right
rotary wheel.
Manually select
the wired client
mode.
5. “▼” button
(1 times) or
rotate right
rotary wheel
clockwise.
“►” button or
“OK” button or
press the right
rotary wheel.
Select the DHCP
for auto config-
ured IP address.
“►” button or
“OK” button or
press the right
rotary wheel.
Confirm to the
settings above.
6.
“►” button or
“OK” button or
press the right
rotary wheel.
Apply new
settings.
7.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
17
Chapter 3: Configuration
Chapter 3: Configuration
3.3 Configure as a Wireless Access Point (AP Mode)
Manually configured as Wired Client Mode: (cont.)
Instructions
Screenshot
Go to next
screen
Notes
AIRMM02F can also be configured as a wireless AP. With this feature, you
can easily extend the wireless coverage without purchasing another AP.
8.
9.
The device is in
wired client mode
now.
To configure AIRMM02F as an AP, you have to manually setup the de-
vice through selecting the MMI menu “Setup/Advanced Setup/Configure
Network/AP mode”. And then setup the IP address scheme, SSID, channel
number and the encryption key of the AP. Once the setting is finished, the
device will reboot automatically and function as an AP.
The device is
connected to
your network
Manually configured as a Wireless Access Point (AP Mode):
Instructions
Screenshot
Go to next
screen
Notes
1.
2.
3.
4.
“OK” button or
press the right
rotary wheel.
Initial screen
“▼“ button
(4 times) or
rotate right
rotary wheel
clockwise.
“►” button or
“OK” button or
press the right
rotary wheel.
“▼” button
(1 times) or
rotate right
rotary wheel
clockwise.
“►” button or
“OK” button or
press the right
rotary wheel.
“▼” button
(2 times) or
rotate right
rotary wheel
clockwise.
“►” button or
“OK” button or
press the right
rotary wheel.
Manually select
the AP mode.
5. “▼” button
(1 times) or
rotate right
“►” button or
“OK” button or
press the right
rotary wheel.
Select the DHCP
for auto configured
IP address.
rotary wheel
clockwise.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
19
Chapter 3: Configuration
Chapter 3: Configuration
Manually configured as a Wireless Access Point ((AP Mode) (cont.)):
Manually configured as a Wireless Access Point ((AP Mode) (cont.)):
Instructions
Screenshot
Go to next
screen
Notes
Instructions
Screenshot
Go to next
screen
Notes
“►” button or
“OK” button or
press the right
rotary wheel.
6. Numeric key
“OK” button or
press the right
rotary wheel.
You can use
the numeric/
10.
11.
12.
13.
pads
alphabet keypad
on remote control
to input the SSID,
or you can use
the option button
to change the
abc/ABC/123/~!#
input.
“►” button or
“OK” button or
press the right
rotary wheel.
7. Numeric key
“OK” button or
press the right
rotary wheel.
You can use the
numeric/ alphabet
keypad on remote
control to input
the Channel, or
you can use the
option button to
change the abc/
ABC/123/~!#
Confirm to the
settings above.
“►” button or
“OK” button or
press the right
rotary wheel.
pads
Apply new
settings.
input.
8. “▼” button
(1 times) or
rotate right
rotary wheel
clockwise.
“OK” button or
press the right
rotary wheel.
Select one of the
security schemes.
14.
15.
The device is
in wireless AP
mode now.
The device is
connected to
your network.
Numeric key
pads
9.
“OK” button or
press the right
rotary wheel.
You can use the
numeric/ alphabet
keypad on remote
control to input
the WEP key, or
you can use the
option button to
change the abc/
ABC/123/~!#
input.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
21
Chapter 4: Listen to Various Music
4.1 Listen to Internet Radio
Chapter 4: Listen to Various Music
It takes few seconds to get the latest list from Internet. And you will see
the next screen.
To listen to music or broadcast programs from Internet radio stations,
please select the “Internet Radio” function from the main menu and then
press the OK button to enter the Internet Radio function.
This means the AIRMM02F is connected to the Internet server and
received the information from the server.
If you see the following screen instead, it means that the device has
encountered problem in retrieving the list from the internet server,
please try again.
The first screen of Internet Radio function shows 2 items for you to select:
“Station List”: Retrieve the Internet radio station lists from the Internet
portal server.
“Favorite Stations”: Retrieve the favorite station lists that stored in the device.
Press “OK” button or “ ” button to retrieve the Station List. The device
will try to connect to the Internet radio server to retrieve the Internet
radio stations for further playback, you will see the following screen:
Download from Www.Somanuals.com. All Manuals Search And Download.
22
23
Chapter 4: Listen to Various Music
Chapter 4: Listen to Various Music
The following screen shots illustrate the sequence to browse to a specific
ratio station such as “4U Classic Rock” in France and start to playback
the music from it.
Instructions
Screenshot
Go to next
screen
Notes
Instructions
Screenshot
Go to next
screen
Notes
1.
2.
3.
“OK” button or
press the right
rotary wheel.
Initial screen
7. “▼“ button
(9 times) or
rotate right
rotary wheel
clockwise.
“►” button or
“OK” button or
press the right
rotary wheel.
Press the “
”
button to add
current station
to favorite list for
quick access later.
“►” button or
“OK” button or
press the right
rotary wheel.
8.
Connecting to
the radio station.
“►” button or
“OK” button or
press the right
rotary wheel.
9.
Start buffering
the music from
the radio station.
4. “▼“ button
(4 times) or
rotate right
rotary wheel
clockwise.
“►” button or
“OK” button or
press the right
rotary wheel.
10..
Music started…
5. “▼“ button
(15 times) or
rotate right
“►” button or
“OK” button or
press the right
rotary wheel.
rotary wheel
clockwise.
6.
“►” button or
“OK” button or
press the right
rotary wheel.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
25
Chapter 4: Listen to Various Music
4.2 Listen to FM Radio
Chapter 4: Listen to Various Music
The following screen shots illustrate the sequence to pre-set the FM
stations and tune to a specific ratio station 98.70 MHz and start the
broadcast program.
Before you can listen to the FM radio, please install the supplied FM
antenna to the back of the device.
Instructions
Screenshot
Go to next
screen
Notes
To listen to music or broadcast programs from local FM radio stations,
please select the “FM Radio” function from the main menu and then
press the OK button to enter the FM Radio function.
1.
2.
“OK” button or
press the right
rotary wheel.
Select “FM
Radio” function
“►” button or
“OK” button or
press the right
rotary wheel.
3. “▼“ button
(2 times) or
rotate right
rotary wheel
clockwise.
Pre-setting the
FM station list
depends on the
signal reception
quality.
The first screen of FM Radio function shows 5 items for you to select:
4.
Found 15
stations
5. “▼“ button
(8 times) or
rotate right
rotary wheel
clockwise.
“►” button or
“OK” button or
press the right
rotary wheel.
Press the “
”
“Station List”: Retrieve the tuned radio station lists from the device.
button to add
current station to
favorite list for
quick access later.
“Favorite Stations”: Retrieve the favorite station lists that stored in the
device.
6.
Tuned to
station and
music started…
“Update List”: Activate the auto scan procedure to discover all the
avaiable FM stations, and keep the tuned stations in the device memory.
“Direct Access”: Allow you to fine tune the frequency of the station or
tune to previous / next FM station manually.
“FM Sensitivity”: Allow you to change FM sensitivity to high or low.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
27
Chapter 4: Listen to Various Music
4.3 Listen to Music in Your Computer
Chapter 4: Listen to Various Music
If there is no server found, you will see the below message.
To listen to music from your own computers, you have to install and acti-
vate the media server utility. Please refer to Appendix A or B for example
on how to install a media server software.
After you installed and activated the media server, you can enjoy listen-
ing to the streaming music from AIRMM02F. Please select the “Media
Server” function from the main menu and then press the OK button to
enter the Media Server function.
Please check if you had already started the media server on your com-
puter. If the media server not found problem still exists, please refer to the
trouble shooting chapter to identify the problem and resolve it step by step.
The following screen shots illustrate the sequence to connect to a media serv-
er “JAMES-NB: James:” and browsing to the Music album “Best of Roxette”.
Instructions
Screenshot
Go to next
screen
Notes
Then, the following message will be displayed during discovering all the
available media servers in your network. It takes few seconds to finish.
1.
2.
“OK” button or
press the right
rotary wheel.
Initial screen
“►” button or
“OK” button or
press the right
rotary wheel.
Searching for
media server.
“►” button or
“OK” button or
press the right
rotary wheel.
3. “▼“ button
(4 times) or
rotate right
Finally, the screen will list all available media servers for you to select.
rotary wheel
clockwise.
4.
“►” button or
“OK” button or
press the right
rotary wheel.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
29
Chapter 4: Listen to Various Music
Chapter 4: Listen to Various Music
4.4 Listen to the Music in Your USB Drive
Instructions
Screenshot
Go to next
screen
Notes
To listen to music on your USB drive or portable MP3 player, please plug
in the USB drive into the USB connector of AIRMM02F. Then select the
“MP3 Player” function from the main menu and then press the OK button
to enter the MP3 player function.
5.
6.
“►” button or
“OK” button or
press the right
rotary wheel.
“►” button or
“OK” button or
press the right
rotary wheel.
7.
“▼“ button
or rotate right
rotary wheel
clockwise.
“►” button or
“OK” button or
press the right
rotary wheel.
The first screen of MP3 Player function shows the root folder content of
the attached USB drive.
8.
“►” button or
“OK” button or
press the right
rotary wheel.
Press the “
”
button to add
current station to
my song queue
for quick access.
9.
Wait till end of
song, or press
Music started.
“
” to next song.
If you see the screen “NO DEVICE”, there was a problem accessing the
USB device. Please remove the USB device and connect again.
10.
Next song started.
Once the music starts, you can freely control the song playback through
the playback buttons, just like you are controlling a traditional stereo or
CD player.
For music playback from the USB drive, you just need to browse to the
music file and click OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
31
Chapter 4: Listen to Various Music
Chapter 4: Listen to Various Music
4.5 The Playback Screen
The following screen shots are an example of how to play a music file.
Instructions
Screenshot
Go to next
screen
Notes
When the music starts, you can see the screen shows related playback
information. It includes the title of the song / station, the album & artist
information, and the playback progression of the music. Besides, there is
a status line in the bottom of the screen.
1.
“OK” button or
press the right
rotary wheel.
Initial screen
It reflects the actual states of the wireless signal strength, the connec-
tion quality, the connection status, and the playback status. Based on the
status information, it can help to troubleshoot if you get in troubles when
listening to the music.
2. “▼“ button
(2 times) or
rotate right
rotary wheel
clockwise.
“►” button or
“OK” button or
press the right
rotary wheel.
Select the music
folder to browse
and playback.
“▼“ button
or rotate right
rotary wheel
clockwise.
“►” button or
“OK” button or
press the right
rotary wheel.
3.
4.
5.
“►” button or
“OK” button or
press the right
rotary wheel.
Music started
Download from Www.Somanuals.com. All Manuals Search And Download.
32
33
Chapter 4: Listen to Various Music
Chapter 4: Listen to Various Music
4.6 How to Add Stations Thru the Web Portal
8. Please fill in info for the station that you wish to add
1. Please make sure you have the latest firmware. Please refer to section
6.6 and 6.7 for steps on how to determine the current firmware version
download_drivers_manuals.php
2. Please go to http://aluratek.vtuner.com
9. Power Off/On the unit
10. You should able to access the newly added station under Stations
List>Added Stations Folder on your internet radio
3. Use vTuner ID (you can find the id either from menu Setting >
vTunerID or the MAC address on the label that is on the bottom of
the unit)
4. Please use your vTuner ID to login to the website
5. Create account login by providing your email address and password
6. Please login to your account after the above step
7. Click Add station
Download from Www.Somanuals.com. All Manuals Search And Download.
34
35
Chapter 5: Setup RSS
Chapter 5: Setup RSS
How to run RSS (cont.):
5.1 How to run RSS
When you enter RSS, you can go to World-Wide Weather to select the
RSS weather of the city you live, or you can select 10 different cities from
list and check the weather daily. If you want to add to Favorite, you can
press ‘favorite’ button on remote control to store.
Instructions
Screenshot
Go to next
screen
Notes
Add to My
7.
8.
Favorite, so that
you can check
the weather
easily.
Instructions
Screenshot
Go to next
screen
Notes
1.
2.
“OK” button or
press the right
rotary wheel.
Initial screen
“
“ button
“►” button or
“OK” button or
press the right
rotary wheel.
or rotate right
rotary wheel
clockwise.
“►” button or
“OK” button or
press the right
rotary wheel.
“►” button or
“OK” button or
press the right
rotary wheel.
Once you add to
My Favorite, it will
show the daily
weather when in
idle mode..
9.
3. “▼“ button
or rotate right
rotary wheel
clockwise.
“►” button or
“OK” button or
press the right
rotary wheel.
10.
“◄” button or
back button to go
previous screen.
4. “▼“ button
(8 times) or
rotate right
rotary wheel
clockwise.
“►” button or
“OK” button or
press the right
rotary wheel.
11.
12.
5.
“►” button or
“OK” button or
press the right
rotary wheel.
“▼” button
or rotate right
rotary wheel
clockwise.
“►” button or
“OK” button or
press the right
rotary wheel.
See more
detailed setting
in (??)
6.
“►” button or
“OK” button or
press the right
rotary wheel.
“►” button or
“OK” button or
press the right
rotary wheel.
Disable or
enable the idle
mode feature
Press the “
”
13.
button to add
current station to
favorite list for
quick access later.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
37
Chapter 5: Setup RSS
Chapter 5: Setup RSS
5.2 How to Subscribe RSS by Utility
Once you successfully added the RSS station, you will see the RSS
URL which you subscribed on AIRMM02F, and you can read the
headlines daily.
Also, AIRMM02F allows you to subscribe other RSS URL. You can insert
the CD into PC, make sure your PC and AIRMM02F is under the same
network, and execute the Utility to search the IP address of this machine
automatically. (see ‘How to setup’ to check IP address )
For example, if you want to subscribe to CNN RSS, please find the link
information from CNN website, copy the Station Name, Genre, Location
and URL, and then click “Add Station” to subscribe it.
(Refer to http://www.cnn.com/services/rss/)
Download from Www.Somanuals.com. All Manuals Search And Download.
38
39
Chapter 6: Advanced Tools
Chapter 6: Advanced Tools
There are some useful setup functions that can help you to operate the
device properly.
6.4 Clear Favorites
Clear all “favorites” Internet radio station and FM radio station stored.
6.1 Network Setting
Check current network information.
6.5 Device MAC Address
Check MAC address of the device.
6.2 Configure Network
Please refer to chapter 3 for network configuration.
6.6 Firmware Version
Check current firmware version.
6.3 Reset to Default
When you reset the device to its factory default, your “favorites” Internet
radio and FM radio will not be erased.
6.7 Firmware Upgrade
If there is any new firmware released, please download and follow the
upgrade procedure below.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
41
Chapter 6: Advanced Tools
Chapter 7: Misc.
7.1 Clock Setting
Steps to upgrade new firmware in the device via a USB drive
Step 1.
Prior to setting the alarm, you need to set the clock of AIRMM02F. First,
select the Setup function from the Main Menu.
Copy the new firmware to the ROOT directory of a USB drive or a USB
MP3 player. (Note. Please DON’T modify the file name, otherwise the
AIRMM02F can’t find the new F/W)
Step 2.
Power on the AIRMM02F and then plug-in the USB drive into the front
USB port of the AIRMM02F.
Step 3.
Operate the AIRMM02F to get into the F/W upgrade menu (“Setup\Ad-
vanced Setup\F/W Upgrade(thru. USB)”), then press the OK button to
activate the
The first item “Clock” is for the date and time setting. Press OK or “
button to set the clock value.
”
F/W Upgrade function. You should see the following messages “F/W
Upgrading”, and “Don’t Power OFF!!”. After a few seconds, the device
will reboot automatically when the upgrade operation is completed.
Step 4.
You can verify the firmware upgrade is successful by checking the firm-
ware version from the menu “Setup\Advanced Setup\Firmware Version”.
There are 3 items in the clock menu, the first one will display the cur-
rent date and time; the second item is for you to set the date and time
manually or via auto-Sync (automatically synchronize with network time
server). If you select the “Auto-sync” function, the device will periodically
synchronize with the server. The third option lets you change time dis-
play format between 12-Hours or 24-Hours. There is a built-in battery in
the device, so if you power off the device, the clock will continue to run.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
43
Chapter 7: Misc.
Chapter 7: Misc.
7.1.1 Time Setup - Manually
7.1.2 Time Setup – Auto-Sync (NTP)
If you decide to set the clock manually, press the OK or “ ” button to go
into the date and clock screen. You can use the four directional buttons
and the OK button to set the current date/time.
If you choose to set the clock automatically, please go into the “Auto-
Sync (NTP)” menu, and select the correct time zone for your location.
After that, the device will set the date and time automatically.
7.1.3 Time Display Format
Use “ ” , “ ” buttons to switch between the items to be adjusted.
The selected item will be flashing.
Choose time display format bewteen 12-Hour or 24-Hours.
Use “ ” , “ ” buttons to adjust (increase or decrease) the value of the
specific item.
Press the OK button to confirm and finish the time setup.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
45
Chapter 7: Misc.
7.2 Alarm Setting
Chapter 7: Misc.
Instructions
7.
Screenshot
Go to next
screen
Notes
To setup an alarm, you have to setup the time and alarm music properly.
The following procedures illustrate a typical alarm setting operation. It
sets Alarm 1 to generate alarm (play music) at 7:00 AM with Internet
radio station “4U Classical Rock” as the source of the music.
“OK” button
Use the 4
directional buttons
to set the volume
Instructions
Screenshot
Go to next
screen
Notes
8.
9.
Final alarm
setting, lasting
for 3~5 seconds
1.
2.
3.
4.
“OK” button
Alarm Menu
The setting is
finished.
“
” button or
Set Alarm 1
“OK” button
After you set and enabled the alarm, you will see there is a bell icon on
the clock screen.
“
” button
“
” button or
Enable Alarm 1
(1 time)
“OK” button
“OK” button
Use the 4
directional
buttons to set
the time
5.
6.
“
” button or
Set Internet
radio as alarm
source.
When the alarm time is up, the device will activate the alarm opera-
tion and playback the specified music. Like traditional clock alarm,
AIRMM02F also provides the SNOOZE function for you to temporarily
stop the alarm, and after 10 minutes, the alarm will start again. You
can press the STOP button to terminate the alarm.
“OK” button
“OK” button
Select the
specific station
or Favorites.
(section 4.1)
Download from Www.Somanuals.com. All Manuals Search And Download.
46
47
Chapter 7: Misc.
Appendix A: Listen to Music via WMP 11
7.3 Backlight Setting
Install & Connect to Windows Media Player 11
Please follow the steps below:
Step 0. Download WMP11.
- Please download Windows Media Player 11 (WMP11) installation file,
e.g., wmp11-windowsxp-x86-enu.exe, from Microsoft’s web site.
- Install wmp11-windowsxp-x86-enu.exe without any changes needed.
- Just click on ‘next’ to finish the installation.
You can adjust the backlight ON / OFF settings as you wish.
Step 1. Activate the Media Player.
- Find the “Windows Media Player” icon from the Program list,
and click on this program to activate it.
The default setting is Always ON. You can set the backlight to be turned
OFF once the device is idle (no key press) after a specific time elapsed.
The backlight can be switched off automatically in 1/3/10/30 minutes.
7.3 Equalizer Setting
In the Setup menu, you can change the setting of the equalizer. The op-
tions available are Normal, Classic, Rock, Jazz, and PoP.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
49
Appendix A: Listen to Music via WMP 11
Appendix A: Listen to Music via WMP 11
Step 2. Change the view
- You will see the following view:
- Change the view from “Now Playing” to “Library” view by clicking on
the Library Tab to manage the content and share your media. You will
see the following view:
- Click on the add button and select the media folder in your computer,
and then click the OK button. For example, you can put all the music
files in the directory D:\Music, so you just need to add the folder to the
share list.
Step 3. Add your Media content to WMP11 media library.
- Click on the “Library” tab again, you can see a pull-down menu.
- To add your media files to the WMP11 media library, please click on the
item “Add to Library…”
Download from Www.Somanuals.com. All Manuals Search And Download.
50
51
Appendix A: Listen to Music via WMP 11
Appendix A: Listen to Music via WMP 11
- You will see the specified folder included in the WMP11 monitor folder lists.
- Then press the OK button. A pop-up window will appear and show you
the WMP11 is searching for the media files.
Step 4. Share the WMP11 media library.
- Similar to Step 3, click on the “Media Sharing” item to activate the
media sharing function.
- When it finished, click on the “Close” button.
- Now, you can browse and manage your media content with the
WMP11 Library manager.
- The following dialog windows will appear.
- Check the “Share my media” checkbox and click on “OK” button.
- The WMP11 will try to discover the available network devices in your LAN.
- The following display showed that no device is found at this moment.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
53
Appendix A: Listen to Music via WMP 11
Appendix A: Listen to Music via WMP 11
If AIRMM02F is already connected to your home network, you will see the
following display that WMP11 found a network device named “Aluratek
AIRMM02F”.
Step 6. Authorize the access from your AIRMM02F.
The WMP11 provides simple access control setting. When WMP11
detects new network device (as the final screen in Step 4), you have to
decide whether you want to allow or deny the requests from that device.
- Please select the device icon and then click on the “Allow” button to
grant further streaming requests from that device. Then you will see
that the device icon state changed consequently.
AIRMM02F
AIRMM01F
Step 5. Manage the setting of sharing media.
- Click on the “Settings” button, and specify the name of the WMP11
server to be displayed on your AIRMM02F.
- Then, press the OK button to apply the setting.
There is another approach to manage the access for your network
devices. There will be a small icon appeared on the Windows XP status
bar to alert you WMP11 found network devices.
- Double click on it to manage the access for the devices.
- Then press “Allow”.
AIREC01F
Then, press OK to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
54
55
Appendix A: Listen to Music via WMP 11
Appendix B: Listen to Music via WMC 2.0
Step 7. Establish the connection between AIRMM02F and WMP11 server.
- From AIRMM02F, select “Media Server” function from the main menu
(or press the hot key “Media Player” on the remote control), and then
AIRMM02F will start the server discovery process. After a few seconds,
it will find server like “PC_Hostname: Server Name”.
Install & Connect to Windows Media Connect V2.0
Please follow the steps below:
Step 0. Download WMC server.
- Please download the Windows Media Connect (WMC) installation file,
wmcsetup.exe, from Microsoft web site.
- Install the wmcsetup.exe without any changes needed.
- Just click on ‘next’ to finish the installation.
Step 1. Activate WMC.
You can find a new installed file icon “Windows Media Connect” from the
Windows XP Program list.
This is the WPM11 server that you installed.
- Press the ‘OK’ button to try to connect to the server.
You will see the AIRMM02F screen shows “ Connecting….” and finally
shows the following list:
You can now browse the “Music” list and playback the music you want.
Click on this program to activate WMC.
Step 2.
You will see a pop-up window, asking for “select the device you want to
allow access to your computer”. Just skip it by pressing the ‘next’ button.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
57
Appendix B: Listen to Music via WMC 2.0
Appendix B: Listen to Music via WMC 2.0
Step 3.
Step 4. Establish the connection between AIRMM02F and WMC server.
- From AIRMM02F, select “Media Server” function from the main menu
(or press the hot key “Media Player” on the remote controller), and then
AIRMM02F will start the server discovery process. After a few seconds,
it will find server like “PC_Hostname: 1: Windows Media Connect”.
- Then press the ‘OK’ button to try to connect to the server.
Then, you will be asked to select the folders you want to share with your
devices.
You will see the AIRMM02F screen shows “ Connecting…”.
As the same time, you will see the following prompt in your PC:
It means that WMC detected an un-authorized device trying to access
the content of the WMC server. You just double click on the WMC icon
to allow the access from the device.
Select the desired folder for your computer. For example, you can put all
the music files in the directory D:\Music, so you select “Let me choose
which folders” and add the folder to the share list.
Finally, press ‘Finish’ to finish the setup of the Windows Media Connect.
Then you can see a small icon on the lower right corner of the startup bar.
Download from Www.Somanuals.com. All Manuals Search And Download.
58
59
Appendix B: Listen to Music via WMC 2.0
Technical Support
Select the device and then click on the ‘Allow’ button.
If you need further assistance, please contact Aluratek support department
prior to returning this device.
E-mail: [email protected]
Local (Tustin, CA): 714-586-8730
Toll free: 1-866-580-1978
Then, press the ‘close’ button to finish the authorization process. At this
moment, AIRMM02F can get the contents or service from the WMC
server. You can browse the list and playback the music you want.
Download from Www.Somanuals.com. All Manuals Search And Download.
60
61
Radio and TV Interference Statement
Warranty
WARNING!!! This equipment has been tested and found to comply
with the limits of a Class B digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation
Aluratek warrants this product against defect in material or workmanship
for 1 Year from the date of purchase.
This warranty becomes invalid if the factory-supplied serial number or
“warranty void” sticker has been removed or altered on the product.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by whatever
measures may be required to correct the interference.
This warranty does not cover:
A) Cosmetic damage or damage due to acts of God
B) Accident, misuse, abuse, negligence or modification of any part of the product.
C) Damage due to improper operation or maintenance, connection to improper
equipment, or attempted repair by anyone other than Aluratek.
D) Products sold AS IS or WITH FAULTS.
IN NO EVENT SHALL ALURATEK’S LIABILITY EXCEED THE PRICE
PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCI-
DENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THE PRODUCT, IT’S ACCOMPANYING SOFTWARE, OR IT’S
DOCUMENTATION.
Aluratek makes no warranty or representation, expressed, implied, or
statutory, with respect to it’s products, contents or use of this documenta-
tion and all accompanying software, and specifically disclaims it’s qual-
ity, performance, merchantability, or fitness for any particular purpose.
Aluratek reserves the right to revise or update it’s product, software or
documentation without obligation to notify any individual or entity.
Download from Www.Somanuals.com. All Manuals Search And Download.
62
63
|