User’s guide
Download from Www.Somanuals.com. All Manuals Search And Download.
After this connection is made, insert the power supply
into a wall outlet.
IN M O TIO N IM 60 0
D IG ITAL SPEAKER SYSTEM FO R IPO D ®
DC (Battery) Pow er
The inMotion iM600 features a built-in rechargeable
Lithium-ion battery.
Th e N e w St a n d a r d f r o m t h e Co m pa n y
t h a t Se t t h e St a n d a r d
Charging time
up to 3 hours
up to 5 hours
Continuous Playing Time
Thank you for purchasing the Altec Lansing iM600
digital speaker system for iPod. When Altec Lansing
introduced the original inMotion, it set new standards
for sound and size and let a whole lot of music out of
the iPod. Today, the new iM600 raises the bar again
with an innovative and performance-leading design.
Charging the rechargeable battery:
The battery should be fully charged before initial use.
To recharge the battery, insert the barrel connector
from the power supply into the DC connector on the
rear of the inMotion iM600. After this connection is
made, insert the power supply into a wall outlet. The
indicator light turns on. When the battery is fully
recharged, the indicator light turns off.
Bo x Co n t e n t s
•
•
•
•
inMotion iM600 mobile speaker system
Wireless remote
When the battery icon on the LCD screen displays a
single segment the battery should be recharged.
When the icon starts flashing, the iM600 is about to
shut down.
Power supply
User’s guide and quick connect instructions
Warning: During the recharging process it is typical for
the battery to become warm. To be safe, keep
M a d e f o r :
flammable materials away from the inMotion iM600.
•
•
•
•
•
•
•
•
•
iPod touch
Note: To conserve battery power, reduce the inMotion
iM600 volume level.
iPod classic
iPod with video
Disconnecting the rechargeable battery:
1. Unplug the inMotion iM600 from the wall outlet.
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod nano (1st generation)
iPod with color display
iPod mini
2. Open the inMotion iM600 by pressing the button on
the front of the speaker system.
3. Remove the rechargeable battery compartment cover
by removing the 2 screws.
iPod with dock connector
4. Unplug the battery and remove it.
Pl a c i n g t h e IN Mo t i o n IM 60 0
St a r t Pl a y i n g
Open the inMotion iM600 by pressing the button on
the front of the speaker system. Position the inMotion
iM600 on a level surface, preferably close to you (within
three feet).
1. Turn on your iPod.
2. Turn on the inMotion iM600 by pushing the
button. The indicator light turns on.
3. Press the SOURCE button until “iPod” is displayed on
the LCD screen.
As s e m b l i n g t h e IN Mo t i o n IM 60 0
Note: To avoid hearing a popping sound when you turn
on your inMotion iM600, always turn on your audio
source first.
Dock your iPod by sliding your iPod on top of the iM600
docking station. If necessary, first install the docking
adapter that came with your iPod. While the docking
adapter is not required for proper functioning of your
iPod and iM600, it will provide a better fit.
Po w e r O f f
Turn off the inMotion iM600 by pushing the button.
The indicator light shuts off.
Note: Alternate audio sources—such as non-dockable
iPod models, CD players, MP3 players, portable DVD
players, and laptops—can also be connected to the
inMotion iM600. For more information, see the
“Connecting to alternate audio source” section.
Au t o Sh u t -d o w n
During battery-only operation the inMotion iM600
automatically shuts down if no audio is detected for
Po w e r
four minutes. Press the
iM600 back on.
button to turn the inMotion
Use one of the following two options to power your
inMotion iM600:
NOTE: The Auto Shut-down feature is active during
battery-only operation. If the AC wall adapter is used,
the inMotion iM600 will remain on until the button
is pushed and the indicator light shuts off.
AC (Wall outlet) Pow er
Insert the barrel connector from the power supply into
the DC connector on the rear of the inMotion iM600.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FM Ra d i o
Co n n e c t i n g t o a l t e r n a t e a u d i o s o u r c e
The inMotion iM600 features a built-in FM radio.
The inMotion iM600 system includes an auxiliary input
jack that allows you to connect to alternate audio
sources, such as non-dockable iPod models, CD players,
MP3 players, portable DVD players, and laptops. To
connect the iM600 to an alternate audio source, follow
the steps below.
Activate the FM radio mode:
Press the SOURCE button until “FM” is displayed on the
LCD screen.
Scanning FM radio stations:
Press and hold the
or
buttons to scan radio
1. Locate a 3.5 mm stereo cable (sold separately).
stations in an incremental manner.
2. Connect one end of the 3.5 mm stereo cable into
the auxiliary input jack (AUX) located on the back
of the inMotion iM600 system, and the other end
to the headphone or line out jack on your alternate
audio device.
Note: When the reception level of the FM station is
strong enough for stereo reception, the FM stereo
indicator on the LCD screen will illuminate.
Programming FM radio stations:
To program FM radio stations into the wireless remote,
follow the steps below:
3. Press the SOURCE button until “AUX” is displayed on
the LCD screen.
1. Press the SOURCE button until “FM” is displayed on
the LCD screen.
4. Set the volume on the audio source at mid-level.
5. Set the volume on the inMotion iM600 at minimum
level and adjust to a comfortable listening level.
2. Use the
be preset.
and
buttons to tune in the station to
3. To program the station in the inMotion iM600
memory, press and hold for 3 seconds one of the
preset buttons [P1, P2, P3, P4] on the wireless
remote. The LCD will display the preset number
together with the word “SAVED” when a station has
been successfully programmed.
Vo l u m e
The “+” and “–” buttons control the master volume.
Press and hold the “+” button to increase the volume
and the “–” button to decrease the volume.
Once an FM radio station has been programmed, simply
press the appropriate preset button [P1, P2, P3, P4] to
select it.
Fo r Ad d i t i o n a l Ba s s
The inMotion iM600 is equipped with a subwoofer
out jack (“SUB OUT”). This output should only be
used to connect an Altec Lansing optional subwoofer
specifically designed to increase the bass output of this
speaker system. Please check w w w.alteclansing.com for
availability information.
Note: To re-program a station in the inMotion iM600
memory, simply repeat steps 1–3.
Al a r m Cl o c k Fu n c t i o n
The inMotion iM600 is compatible with your iPod
device’s alarm clock feature. To use your iPod and the
inMotion iM600 as an alarm clock, follow the steps
below:
1. Activate the alarm clock feature on your iPod (for
more information, consult your iPod user’s guide.)
2. Dock your iPod in the inMotion iM600.
3. Make sure the inMotion iM600 is plugged into a
wall outlet.
4. Turn on the inMotion iM600 by pushing the
button. The indicator light turns on.
5. Press the SOURCE button until “iPod” is displayed on
the LCD screen.
6. Use the “+” and “–” buttons on the inMotion iM600
to set the master volume.
Note: For the alarm clock function to work properly, the
inMotion iM600 must be plugged in to a wall outlet.
The inMotion iM600 will otherwise automatically shut
down if no audio is detected for four minutes.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Tr o u b l e s h o o t i n g
Sy m p t o m
Po s s i b l e Pr o b l e m
So l u t i o n
The
rechargeable
battery
The surge protector (if used) isn’t
powered on.
If the power supply cord is plugged into a surge
protector, make sure the surge protector is switched on.
won’t
The wall outlet is not functioning.
The power isn’t turned on.
Plug another device into the same wall outlet to
confirm the outlet is working.
charge and
no power
indicator
light is
Turn on the inMotion iM600 by pushing the
The indicator light turns on.
button.
on (AC
operation).
No Power
indicator
light is on
(Battery
The rechargeable battery isn’t
charged.
Recharge the battery (see the “Power” section for
details.)
The power isn’t turned on.
The volume is set too low.
Turn on the inMotion iM600 by pushing the button.
The indicator light turns on.
operation).
No sound is
coming from
speakers.
The “+” and “–” buttons control the master volume.
Press and hold the “+” button to increase the volume.
Check the volume level on alternate audio source
device and set at mid-level.
An incorrect source has been selected.
Press the SOURCE button until the appropriate source
is displayed on the LCD screen.
The iPod is not correctly seated into
the docking station.
Turn off the iPod, remove it from the docking station,
reseat it, and turn it on again.
If using an alternate audio source, the
audio source is not properly connected
to the inMotion iM600 or there is a
problem with the alternate audio
source.
• Connect an alternate audio source—such as a CD
player, MP3 player, or portable DVD player—to your
inMotion iM600 by plugging one end of a 3.5mm
stereo cable (sold separately) to the line out of your
portable device (if it has one) or to the device’s
headphone jack. Connect the other end to the input
marked “AUX” on the back of the inMotion iM600.
• Set the volume on the audio source at mid-level.
• Set the volume on the inMotion iM600 at minimum
level and adjust upward to a comfortable listening
level.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Sy m p t o m
Po s s i b l e Pr o b l e m
So l u t i o n
There is a
crackling
sound
The iPod is not correctly seated into
the docking station.
Turn off the iPod, remove it from the docking station,
reseat it, and turn it on again.
coming from
speakers.
If using an alternate audio source, the
audio source is not properly connected
to the inMotion iM600 or there is a
problem with the alternate audio
source.
• Connect an alternate audio source—such as a CD
player, MP3 player, or portable DVD player—to your
inMotion iM600 by plugging one end of a 3.5mm
stereo cable (sold separately) to the line out of your
portable device (if it has one) or to the device’s
headphone jack. Connect the other end to the input
marked “AUX” on the back of the inMotion iM600.
• Set the volume on the audio source at mid-level.
• Set the volume on the inMotion iM600 at minimum
level and adjust upward to a comfortable listening
level.
There is a
crackling
sound
The operating system’s volume level is
set too high.
Check the operating system volume level and decrease
it if necessary.
coming from
speakers
(when
connected
to PC or
laptop).
The sound
is distorted.
The inMotion iM600’s volume level is
set too high.
The “+” and “–” buttons control the master volume.
Press and hold the “–” button to decrease the volume.
There is
radio
The unit is too close to a radio tower.
Move the unit to see if the interference goes away.
interference.
Intermittent
buzzing.
The unit is located too close to a GSM
cell phone.
Move the GSM cell phone away from the unit.
The
inMotion
iM600
Static electricity, momentary
interruption of power, or abnormal
operating conditions may be
responsible.
1. Disconnect the power supply from the wall outlet.
2. Disconnect the rechargeable battery per instructions
in the “Power” section.
exhibits
3. Wait 20–30 seconds.
erratic or
unexpected
behavior.
Controls do
not function.
4. Reconnect the rechargeable battery.
5. Reconnect the power supply.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
This Class B digital apparatus complies with Canadian ICES-003. • Cet appareillage digital de Classe B est conforme au ICES-003 canadien.
“Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod
and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Patents pending.
© 2007 Plantronics, Inc. All rights reserved.
Altec, Altec Lansing, inMotion, the Altec Lansing inMotion logo, SFX, and the SFX logo are registered trademarks or trademarks of Altec Lansing.
Plantronics, the logo design and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
All other trademarks appearing herein are the property of their respective owners.
Designed by Altec Lansing in the USA. Made in China.
Co r po r a t e H e a d q u a r t e r s 535 Rte. 6 & 209, Milford, PA 18337-0277, USA • 866-570-5702 • 570-296-4434 • Fax 570-296-6887
A12118 R07
Designed in USA. Made in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|