R
DVA-5205
DVD/VIDEO CD/
CD PLAYER
• OWNER’S MANUAL (Page 2-67)
Please read this manual- to maximize your
enjoyment of the outstanding performance and
feature capabilities of the equipment, then retain
the manual for future reference.
• MODE D’EMPLOI (Page 72-137)
Veuillez lire ce mode d’emploi pour tirer
pleinement profit des excellentes performances et
fonctions de cet appareil, et conservez-le pour
toute référence future.
• MANUAL DE OPERACION (Página 138-??)
Lea este manual, por favor, para disfrutar al
máximo de las excepcionales prestaciones y
posibilidades funcionales que ofrece el equipo,
luego guarde el manual para usarlo como
referencia en el futuro.
DIGITAL VIDEO
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
This symbol means important instructions.
Failure to heed them can result in injury or property damage.
Caution
DO NOT BLOCK VENTS OR RADIATOR PANELS. Doing so may cause heat to
build up inside and may result in fire.
DO NOT MIX NEW BATTERIES WITH OLD BATTERIES. INSERT WITH THE
CORRECT BATTERY POLARITY. When inserting the batteries, be sure to
observe proper polarity (+ and –) as instructed. Rupture or chemical leakage
from the battery may cause fire or personal injury.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may
cause personal injury or damage to the product. Return it to your authorized
Alpine dealer or the nearest Alpine Service Center for repairing.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Temperature
Be sure the temperature inside the vehicle is between +60°C (+140°F) and –10°C
(+14°F) before turning your unit on.
Moisture Condensation
You may notice the CD playback sound wavering due to condensation. If this happens,
remove the disc from the player and wait about an hour for the moisture to evaporate.
Damaged Disc
Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could
severely damage the playback mechanism.
Maintenance
If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine
dealer or the nearest Alpine Service Station for servicing.
Never Attempt the Following
Do not grip or pull out the disc while it is being pulled back into the player by the
automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is off.
Inserting Discs
Your player accepts only one disc at a time for playback. Do not attempt to load more
than one disc.
Make sure the label side is facing up when you insert the disc.Your player will auto-
matically eject any disc that is inserted incorrectly.
Playing a disc while driving on a very bumpy road may result in skips, but this will not
scratch the disc or damage the player.
Irregular Shaped Discs
Make sure the discs you use in this unit do not have any irregularities. The outer and
inner edges should be round and smooth. Use of irregularly shaped discs may cause
damage to the mechanism.
New Discs
As a protective measure to prevent the CD from jamming, the CD player will automati-
cally eject discs with irregular surfaces or inserted incorrectly. When a new disc is
inserted into the player and ejected after initial loading, using your finger, feel around
the inside of the centre hole and outside edge of the disc. If you feel any small bumps
or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub
the inside edge of the hole and outside edge of the disc with a ball-point pen or other
such instrument, then insert the disc again.
Installation Location
Make sure the DVA-5205 will not be installed in a location subjected to:
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Custom setting –
Precautions
Changing the Closed Caption setting .................... 35
Custom setting – Changing the Ai-NET settings.... 36
Custom setting –
Warnings and Cautions ............................... 2
Contents ...................................................... 5
Changing the H.U. Control settings ........................ 38
Quick Guide
Digital Audio Processor (Optional)
About DVDs ................................................. 6
Discs playable on this DVD player ............... 7
When using remote control ......................... 8
Loading and unloading discs ....................... 9
Turning the power on and off ..................... 10
Switching between NTSC and
PAL configuration....................................... 11
Adjusting the volume ................................. 11
Playing discs.............................................. 12
Stopping playback ..................................... 13
Fast-forwarding/fast-reversing ................... 14
Finding the beginnings of chapters or tracks .... 14
Playing still frames (pausing) ..................... 15
Frame-by-frame playback .......................... 15
Slow motion playback ................................ 15
Operating the digital audio processor (optional) .... 40
Adjusting the parametric equalizer ............ 41
Adjusting the surround settings ................. 42
Storing the surround settings .................... 43
Recalling the surround settings ................. 44
Adjusting the time compensation .............. 45
Using the Pro Logic mode ......................... 45
ADJUST – Setting the speaker mode........ 46
ADJUST – Adjusting the acoustic image ... 47
ADJUST – Mixing the rear audio channels ....... 48
ADJUST – Center speaker time compensation ..... 49
ADJUST – Rear speaker time compensation ... 50
ADJUST – Achieving powerful sound at low volumes .. 51
ADJUST – Adjusting the speaker level ...... 52
MODE – Adjusting the volume, fader and balance ..... 53
MODE – Adjusting the subwoofer ............. 54
MODE – Turning the defeat function on and off ..... 55
Convenient Functions
Searching by title number .......................... 16
Searching directly by chapter or track number .. 17
Searching by elapsed time ........................ 18
Chapter/track/title repeat playback ............ 19
Switching the audio language ................... 19
Switching the angle ................................... 20
Switching the subtitles (subtitle language) ...... 20
Displaying the subtitles .............................. 21
Displaying the disc status .......................... 22
Video Output ON/OFF ............................... 23
Operating from the Head Unit
(CDA-7965)
Operating from the head unit ..................... 56
Operating from the head unit’s remote control unit ..... 58
Others
Terminology ............................................... 60
List of language codes .............................. 61
In case of difficulty ..................................... 62
Specifications ............................................ 63
Functions of remote control unit buttons ... 64
SET UP
Changing the Default Settings
Changing the default settings (setup) ........ 24
Changing the language setting .................. 24
Changing the TV screen settings .............. 26
Changing the country code setting ............ 27
Setting the rating level (parental lock) ....... 28
Changing the downsampling setting.......... 30
Changing the digital output setting ............ 32
Changing the LED indicator setting ........... 34
5
Download from Www.Somanuals.com. All Manuals Search And Download.
About DVDs
About DVDs
Music CDs and DVDs have grooves (tracks) in
which the digital data is recorded. The data is
represented as microscopic pits recorded into
the track – these pits are read by a laser beam
to play the disc. On DVDs, the density of the
tracks and pits is twice that of CDs, so DVDs
can contain more data in less space.
Moreover, DVDs offer a variety of functions.
• Multiple audio* (page 19)
Movies can be recorded in up to eight
languages. The desired language can be
selected from the remote control unit.
• Subtitles function* (page 20)
Movies can include subtitles in up to 32
languages. The desired subtitle language
can be selected from the remote control unit.
CD-ROMs
• Multi angle function* (page 20)
When the DVD contains a movie shot from
multiple angles, the desired angle can be
selected from the remote control unit.
Minimum bit
length
- 0.9 µm
Track pitch -
1.6 µm
• Multi story function*
1.2 mm
With this function, a single movie includes
various story lines. You can select different
story lines to view various versions of the
same movie.
Operation differs from disc to disc. Story line
selection screens including instructions
appear during the movie. Just follow the
instructions.
DVDs
Minimum bit
length -
0.9 µm
Track pitch -
0.74 µm
0.6 mm
0.6 mm
Note: * The functions audio languages, subtitle
languages, angles, etc., differ from disc to
disc. For details, refer to the disc’s
instructions.
A 12 cm disc can contain one movie or about
four hours of music.
In addition, DVDs provide sharp picture quality
with vivid colors thanks to a horizontal resolu-
tion of over 500 lines (compared to less than
300 for VHS tape). With the addition of an
optional, digital audio processor (PXA-H510),
you can recreate the power and presence of a
movie theater with Dolby Digital 5.1-channel
Surround.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Discs playable on this DVD player
Discs playable on this DVD player
• Playable discs
The discs listed below can be played on this
DVD player. Other discs cannot be played.
• DVD region number (playable region
number)
This DVD player will play back any disc
whose region number is 1 (or All). DVDs with
a region number other than those listed
below, cannot be played on this DVD player.
Max.
playing time
Mark (logo) Recorded
content
Disc size
12 cm*
1
ALL
One-sided
disc
Approx.
4 hours
• Video CDs
This DVD player is compatible with playback
control (PBC) compatible video CDs (version
2.0).
Two-sided
disc
“PBC” is a function by which you can use
menu screens recorded on the disc to find
the scene you want to watch and view
various types of information in dialog style.
Approx.
8 hours
Audio
+
Video
(Moving
pictures)
DVD
Video
One-sided
disc
Approx.
80 Minutes
• Disc terminology
Title
If titles are programmed for the DVD, these
are the largest unit of division of the informa-
tion recorded on the disc.
8 cm
One-sided
disc
Approx.
Chapter
Each Title may also be divided into smaller
divisions called Chapters. These can be
specific scenes or musical selections.
160 Minutes
Approx.
74 Minutes
12 cm
8 cm
Audio
+
Video
(Moving
pictures)
DIGITAL VIDEO
* This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this copy-
right protection technology must be
authorized by Macrovision Corporation,
and is intended for home and other
limited viewing uses only unless other-
wise authorized by Macrovision Corpo-
ration. Reverse engineering of disas-
sembly is prohibited.
Video
CD
Approx.
20 Minutes
VIDEO CD
Approx.
74 Minutes
12 cm
8 cm
Music
CD
Audio
Approx.
(CD single) 20 Minutes
* Two-layer DVD disc compatible
* Manufactured under license from
Dolby Laboratories. “Dolby”, “Pro
Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
* “DTS” and “DTS Digital Out” are
trademarks of Digital Theater Sys-
tems, inc.
• Discs that cannot not be played
DVD-ROMs, DVD-R/DVD-RAMs, CD-ROMs,
CD-R/CD-RWs, photo CDs, etc.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
When using remote control
When using remote control
Replacing the batteries
• Changing Switch
Opening the battery cover
Push on the cover and slide it as
indicated by the arrows then the cover will
be removed.
To operate the DVD Player shift the
changing switch to the “DVD” side.
Operate while viewing the blue charac-
ters on the remote control unit.
DVD / AUDIO
Replacing the battery
Remove the old batteries. Insert new
ones matching the (+) and (–) polarities
as shown in the diagram inside the
remote control.
Switching to “AUDIO” makes it possible
to operate Alpine audio products as
well. Operate while viewing the white
characters on the remote control unit.
• Point the remote control at the remote
sensor within about 2 meter.
• It may not be possible to operate the
remote control unit if the remote control
sensor is exposed to direct sunlight.
• The remote control is a small, light
weight precision equipment. To avoid
damage, early battery wearing, opera-
tions error and deterioration of opera-
tion feeling, take care of the followings.
- Do not apply any shock.
Closing the cover
Push the cover in the arrow direction until
a click is heard.
- Do not put in a trouser pocket.
- Keep free from splashing of a drink,
moisture and dusts.
- Do not place in direct sunshine.
Note: Use two AA size batteries.
Warning
DO NOT OPERATE THE EQUIPMENT OR LOOK AT THE SCREEN WHILE
DRIVING THE VEHICLE.
Operating the equipment may distract the driver from looking ahead of the vehicle
and cause accident. Always stop the vehicle in a safe location before operating
this equipment.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading and unloading discs
DVD
Video CD
Loading and unloading discs
Turn on the power before loading and unloading discs.
(Refer to page 10 “Turning the power on and off”.)
CD
Loading discs
Close the door.
Be sure to close the door to prevent dust
from getting inside.
Press the door in gently then
slide it downwards.
Insert the disc with the side
containing words or diagrams
facing upwards.
Once the disc is partially inserted, it is
drawn in automatically. Playback starts.
Unloading discs
Press the door in gently then
slide it downwards. The disc is
automatically ejected part way.
If the disc is not removed, it is automati-
cally drawn back into the player after a
while.
Notes:
• If the ignition key is on ACC or ON, a disc can be
inserted even when the power is OFF. The power
then goes ON automatically.
• Never insert a navigation map disc. If inserted it
may cause a failure.
• For two-sided DVDs, play one side of the disc to
the end, then unload the disc, turn it over and
reload it to play the other side.
Note: If the ignition key is on ACC or ON, a disc
can be removed even when the power is
OFF. After removing the disc, the power
goes OFF again automatically.
Refer to the indications on the disc (“Side 1”/”Side
2”).
• Never insert map discs for navigation purposes
as they could damage the equipment.
• If wrong disc, upside-down discs or dirty discs
have been inserted, “DISC ERROR” is displayed.
Open the door and remove the disc.
Never close the door while the disc
Caution
is being unloaded. Doing so could
scratch the disc or damage the
player.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the power on and off
Turning the power on
and off
Press “POWER”.
The power turns on.
When connected with an Alpine
head unit
Caution
If the DVA-5205 is connected to
anything other than the CVA-1005/
IVA-C800, the default DVD setting
must be changed. See page 36,
“Custom setting – Changing the Ai-
NET settings” to change the SETUP
to CD mode before using it.
To turn the power off, press
“POWER” again.
Notes:
• With this unit connected to an Ai-NET compatible
head unit, there will be about a 3 second delay
during power-up from the remote control. This is
caused by the systems communications being
carried out by the various components and is not
a defect.
• When connected with an Ai-NET compatible head
unit, the power cannot be turned off from the
remote control unit. Turn off the DVA-5205’s
power by switching the head unit’s source. For
details, refer to “Operating from the head unit”
(page 56).
Play Position Memory Function
• Even if you turn power off or switch the
Ignition Key to OFF during playback or
change the video source, playback will
continue from the point where playback
stopped when the power is turned ON
again.
The play position memory is released if
the disc is removed or the Reset switch
is pressed.
• Reading this manual
Tips
Stopping playback
These indicate the discs for which
the function can be used.
DVD
Video CD
Stopping
CD
DVD
playback
...DVDs
Press the stop button during playback to stop
playback. That position is stored in the memory.
Video CD
...Video CDs
Press “L ” during playback.
CD
...Music CDs
•
Using the PRE-STOP function
When the PRE-STOP function is used, the
position at which playback is stopped is stored in
the memory, and playback resumes from that
position.
Tips
This indicates supplementary
explanation of operation of this
system.
Press “L ” once during playback.
“PRE-STOP” is displayed.
Press “: ” in the PRE-STOP mode.
Playback starts from the position at which it
was stopped.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching between NTSC and PAL configuration
Adjusting the volume
Switching between
NTSC and PAL
configuration
Adjusting the volume
Adjust the volume for connecting only
with the Digital Audio Processor (PXA-
H510).
Switch the video output configuration to
NTSC or PAL according to the type of
television and the disc recording method.
Move the rotary encoder to the
right or left.
Turn to the right to increase the volume.
Turn to the left to decrease the volume.
Press NTSC/PAL for
at least 5 seconds.
Notes:
• NTSC is the standard and there is no need to
change the setting. The system is set to NTSC at
time of shipment from the factory.
• The image output configuration must be correct.
Otherwise the following message appears and
playback does not start: “VIDEO SIGNAL
SYSTEM IS NOT CORRECT”.
Note:If an Ai-NET product (head unit) has been
connected in addition to the Digital Audio
Processor (PXA-H510), or if this equipment is
connected singly to a TV monitor, adjust the
volume on the connected equipment.
DVD
Video CD
CD
•
Using the Number Keys.
This describes use of the Number
Keys, particularly the +10 key.
Tips
To input 10: Press the +10 key once
and then press the 0 key.
To input 16: Press the +10 key once
and then press the 6 key.
To input 23: Press the +10 key twice
and then press the 3 key.
* Each time the +10 key is pressed, the
number increases by one decimal.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
DVD
Video CD
Playing discs
CD
• With some DVDs, certain operations
are disabled. Such operations are
not possible on such DVDs.
• The DVD functions described in this
manual are not supported by all
DVDs. See the individual DVDs
instructions for details on the
features supported.
Caution
• Fingerprints on a disc may
adversely affect playback. If a
problem occurs, remove the disc
and check for fingerprints on the
playback side. Clean the disc if
necessary.
• When using the remote control, be
careful to press one button at time.
Pressing multiple buttons at the
same time may cause erroneous
operation.
• Even if you switch the power or the
Ignition Key to OFF during playback
or change the video source,
playback will continue from the point
where it stopped when the power is
turned ON again.
If the disc is removed or the Reset
switch is pressed, the play position
memory is released.
Press “: ”.
Playback starts.
DVD
Video CD
• If a menu screen appears
～
、
On DVDs and video CDs with playback control
(PBC), menu screens may appear automati-
cally. If this happens, perform the operation
described below to start playback.
Note: For many discs, the menu screen can also
be displayed by pressing “MENU” or “TITLE”
for at least 2 seconds.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Stopping playback
DVD menu
DVD
Video CD
Stopping
playback
Use the “Joystick” or the number keys (“0” to “9”
and ”+10”) to select the desired item, then
press “ENT” or “ : ”.
CD
Press the stop button during playback to stop
playback. That position is stored in the memory.
1
2
3
SUB T. ON/OFF. AUDIO
Press “L ” during playback.
4
7
5
ANGLE
6
9
or
or
8
OP/
UP
+10
CL 0
•
Using the PRE-STOP function
When the PRE-STOP function is used, the
position at which playback is stopped is stored in
the memory, and playback resumes from that
position.
Tips
Press “L ” once during playback.
“PRE-STOP” is displayed.
Note: For some discs it is not possible to select
items from the menu screen using the
number keys (“0” to “9” and ”+10”).
Video CD menu
Press “: ” in the PRE-STOP mode.
Playback starts from the position at which it
was stopped.
Use the number keys (“0” to “9” and ”+10”) to
select the desired number, then press “ENT” or
“ : ”.
1
2
3
SUB T. ON/OFF. AUDIO
4
7
5
ANGLE
6
9
8
•
Canceling the PRE-STOP function
OP/
UP
+10
Either press “ L ” again in the PRE-STOP mode
or eject the disc and turn the power or the ignition
key off to clear the memory.
CL 0
Notes:
• The PRE-STOP function cannot be used with
video CDs equipped with playback control (PBC)
when the PBC function is turned on.
The menu screen appears when “L ” is pressed.
• For some discs, the position at which playback
was stopped may not be accurate.
or
Note: Playback starts at the beginning of the disc
whenever ignition is turned off or another
Ai-NET source is selected.
Note: The menu screen does not appear when the
PBC function is turned off. If this is the
case, press “MENU” to turn on the PBC
function.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Fast-forwarding/fast-reversing
Finding the beginnings of chapters or tracks
DVD
Video CD
Fast-forwarding/
fast-reversing
CD
During playback,
press “c” (fast-
reverse) or “f”
(fast-forward) for
at least 2 seconds.
or
Press “: ” to return to
normal playback.
Notes:
• No sound or subtitles are played during fast-
forwarding/fast-reversing.
• For DVDs and video CDs with playback control
(PBC), the menu screen may reappear during
fast-forwarding/fast-reversing.
DVD
Video CD
Finding the begin-
CD
nings of chapters or tracks
During playback,
press“ c” or “ f”.
The chapter/track switches
each time the button is
pressed, and playback of
the selected chapter/track
starts.
or
f: Press this to start playback from the
beginning of the following chapter or
track.
c
:
Press this to start playback
from the beginning of the current
chapter or track.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing still frames (pausing)
Frame-by-frame playback
Slow motion playback
DVD
Frame-by-frame
playback
Note: Some DVDs do not have chapters.
Video CD
In the pause mode,
Supplementary explanation
“Chapters” are divisions of movies or
musical selections on DVDs.
“Tracks” are divisions of movies or musical
selections on video and music CDs.
press “
”.
The picture advances by
one frame each time the
button is pressed.
Press “: ” to resume
normal playback.
DVD
Video CD
Note: No sound is played during frame-by-frame
Playing still
playback.
CD
frames (pausing)
During playback,
DVD
Slow motion
playback
press “
” once.
Video CD
During playback,
press “SLOW” for
at least 2 seconds.
Press “: ” to resume
playback.
Press “: ” to resume
normal playback.
Notes:
• No sound is played during the still frame mode.
• When a playback starts after about 5 minutes of
temporary still (pause), a picture or sound may
stop for an instant period, but this is not a failure.
Notes:
• No sound is played during slow motion playback.
• Slow playback is not available when playing back
a slide show.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching by title number
DVD
Searching by title
number
Use this function to easily find positions
on the DVD using the DVD’s title menu.
During playback, press
“GO TO”.
The mode switches each
time the button is pressed.
Select “TITLE”.
TITLE
CHAPT
TIME
Normal playback
Input the number of the
title you want to play
using the number keys
(“0” to “9” and “+10”).
1
2
3
SUB T. ON/OFF. AUDIO
4
7
5
ANGLE
6
9
8
OP/
UP
+10
CL 0
(When title number 1 is input)
Notes:
• This function cannot be used on discs on which
no title numbers are recorded.
• Press “CLR” to delete the last digit in the title
number. Press “CLR” for at least 2 seconds to
clear all title numbers.
～
、
• Press “RTN” to cancel the title search mode and
resume normal playback.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching directly by chapter or track number
Notes:
Press “: ” or “ENT”.
Playback starts from the selected title
number.
• This function cannot be used on discs on which
no chapter numbers are recorded.
• Press “CLR” to delete the last digit in the chapter/
track number. Press “CLR” for at least 2 seconds
to clear “Chapter” and “Track” numbers.
• Press “RTN” to cancel the chapter/track search
mode and resume normal playback.
• With video discs containing playback control
(PBC), function of “searching directly by track
number” is not available under the PBC ON
status.
or
Press “: ” or “ENT”.
Playback starts from the selected chapter
or track.
DVD
Video CD
Searching
CD
directly by chapter
or
or track number
Use this function to easily move to the
beginnings of the chapters or tracks on the
disc.
During playback, press “GO TO”.
The mode switches each time the button
is pressed. Select “CHAPT” or “TRACK”.
DVD Video
Normal playback
TITLE
CHAPT
TIME
TIME
Video-CD/CD
TRACK
Normal playback
Input the number of the
chapter or track you
want to play using the
number keys (“0” to “9”
and “+10”).
1
2
3
SUB T. ON/OFF. AUDIO
4
7
5
ANGLE
6
9
8
OP/
UP
+10
CL 0
(When chapter number 12 is input)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching by elapsed time
DVD
Video CD
Searching by
elapsed time
CD
Use this function to search by specifying
the elapsed time.
ENT
During playback, press “GO TO”.
The mode switches each time the button
is pressed. Select “TIME”.
DVD Video
RPT
DISC
Normal playback
TITLE
CHAPT
TIME
TIME
Video-CD/CD
TRACK
Normal playback
Input the elapsed time
from which you want to
start playback using the
number keys (“0” to “9”
and “+10”).
1
2
3
SUB T. ON/OFF. AUDIO
4
7
5
ANGLE
6
9
8
OP/
UP
+10
CL 0
3
AUDIO
DN
CLR
(When 1 hour, 30 minutes is input as the
elapsed time)
Notes:
• Input the hours first, followed by the minutes, then
the seconds.
• Press “CLR” to delete the last digit in the elapsed
time. Press “CLR” for at least 2 seconds to erase
all the set times.
UP
+10
0
～
、
9
• Press “RTN” to cancel the elapsed time search
mode and resume normal playback.
• With DVDs, the precision of the elapsed time
search function differs from disc to disc.
• With video discs containing playback control
(PBC), function of “searching by elapsed time” is
not available under the PBC ON status.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter/track/title repeat playback
Switching the audio language
DVD
Switching the
audio language
Press “: ” or “ENT”.
Playback starts from the specified
elapsed time.
Video CD
On DVDs including multiple audio modes or
multiple audio languages, the audio
language can be switched during playback.
or
During playback,
press “AUDIO” for
at least 2 seconds.
The sound switches
between the different
audio modes recorded on the
disc each time the button is
pressed.
DVD
Video CD
Chapter/track/
title repeat
playback
Notes:
CD
• The language selected with the default settings is
set when the power is turned on or the disc is
replaced. If the disc does not include that
language, the disc’s default language is set.
• For some discs it is not possible to switch the
audio language during playback.
Use this function to play the disc’s titles,
chapters or tracks repeatedly.
• Some time may be required for the audio
language to change.
RPT
DISC
During playback, press
“RPT”.
The repeat mode switches
each time the button is
pressed.
• Video CDs with multiplex audio
During playback,
press “AUDIO” for
at least 2 seconds.
The combination of the
left and right channels
changes each time the button is
pressed.
DVD
The chapter is
Chapter
played repeatedly.
The title is
played repeatedly.
Title
Repeat off
The mode returns
to normal playback.
(setting at factory
shipping)
LL
R R
LR
Video CD
CD
The track is
played repeatedly.
Track
The entire disc is
played repeatedly.
Disc
(setting at factory
shipping)
Repeat off
Note: The track/disc repeat modes cannot be
used on video CDs with playback control
(PBC). Press “MENU” to turn the PBC
function off.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the angle
Switching the subtitles (subtitle language)
DVD
Switching the angle
With DVDs on which images photo-
graphed from multiple angles are
recorded, the angle can be switched
during playback.
During playback, press
“ANGLE” for at least 2
seconds.
The angle switches between
the angles recorded on the disc
each time the button is pressed.
Notes:
• Some time may be required for the angle to
change.
• Depending on the disc, the angle may switch in
one of two ways.
- Seamless
: The angle switches smoothly.
- Non-seamless : When the angle is switched, a
still picture is displayed first,
after which the angle switches.
DVD
Switching the
subtitles (subtitle
language)
With DVDs on which multiple subtitle
languages are recorded, the subtitle
language can be switched during playback.
During playback,
press “SUB T.” for
at least 2 seconds.
The subtitle language
switches between the languages
recorded on the disc each time
the button is pressed.
～
、
Notes:
• Some time may be required for the subtitle
language to change.
• The language selected with the default settings is
set when the power is turned on or the disc is
replaced. If the disc does not include that
language, the disc’s default language is set.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying the subtitles
Displaying the disc status
DVD
DVD
Displaying the
subtitles
Displaying the
disc status
Use the procedure described below to display
the status (title number, chapter number, etc.) of
the currently playing DVD on the screen.
With DVDs on which subtitles are recorded,
you can select whether to display the subtitles
or not during playback.
During playback, press
“DISP.”.
The playback status is
displayed.
During playback,
DISP.
TUNER
press “– ON/OFF” for at
least 2 seconds.
The currently displayed
subtitles are turned on and off
each time the button is pressed.
TV system (NTSC or PAL)
Operating mode
Note: For some discs, the subtitles will be
displayed even when this is set to off.
Current title
number
Current subtitle language
Current angle
number
•
Switching from the menu
Current chapter
number
For some discs, the audio language, angle and
subtitles can be switched from the disc menu.
Tips
Repeat setting
Current audio
language
(Only during repeat
playback)
Press “MENU” or “TITLE” (for at least
2 seconds), select the item, then
press “ENT”.
Audio recording system
or
Press “DISP.” once
more to turn the
display off.
DISP.
TUNER
Use the “Joystick” or the number
keys (“0” to “9” and “+10”) to select
the language or angle, then press
“ENT” or “:”.
1
2
3
SUB
T.
ON/OFF.
AUDIO
4
7
5
ANGLE
6
9
8
OP/
UP
+10
CL 0
or
or
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying the disc status
Video CD
Displaying the
disc status
CD
Use the procedure described below to display
the status (track number, etc.) of the currently
playing video CD or music CD on the screen.
During playback, press
“DISP.”.
DISP.
TUNER
The playback status is
displayed.
Playback control (PBC)
ON/OFF (For video CDs only)
TV system (NTSC or PAL)
Playback disc
(CD: Music CD
VCD: Video CD)
Current track
number
Operating mode
Track playback
time
Repeat setting (Default setting-disc repeat)
Note: For music CDs, the playing status is
displayed even when “DISP.” is not pressed.
Press “DISP.” once
more to turn the
display off.
DISP.
TUNER
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Video output ON/OFF
Video output ON/OFF
(Only when CVA-1005/IVA-C800 is
connected)
Note: This output is at a fixed level and requires a
preamp with a volume control to adjust
listening levels.
When this unit is used with the CVA-1005/
IVA-C800 + the TME-M750 (Extra Monitor
for Rear Seat), the DVD video can be
viewed independently of what’s being
viewed on the CVA-1005/IVA-C800.
For example, DVD video can be moni-
tored on the Rear Monitor, while a
Navigation map is displayed on the CVA-
1005/IVA-C800. If an audio source is
selected, the main audio system will be
used to listen to the CVA-1005/IVA-C800.
Use the RCA connectors at the rear of
the DVA-5205 to feed audio to your Rear
monitor.
Set AUX OUT of “Selecting Rear
Monitor” on the CVA-1005/IVA-
C800 side to AUX 1.
Change the source on the CVA-
1005/IVA-C800 side to MD, CD,
radio, etc.
Use the “Playing 2 Sources
Simultaneously” function on the
CVA-1005/IVA-C800 side to select
DVD with the V.SEL button.
Press V.OUT on the
remote control unit for
this equipment at least
2 seconds.
To release, press V.OUT for
at least 2 seconds.
Note: Refer to the Instruction Manual of the CVA-
1005/IVA-C800 for operation on the CVA-
1005/IVA-C800 side.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the default settings (setup)
Changing the language settings
SET UP
Changing the default
settings (setup)
The factory default settings can be
changed to suit your personal prefer-
ences and usage.
In the stop mode, press
“SET” for at least 2
seconds.
The default setting menu
appears.
Note: This operation cannot be performed in the
PRE-STOP mode.
Use the “Joystick” to
make the selection,
then press “ENT”.
For the procedure after
selecting the setting item,
refer to the pages
o
indicated on the table below.
Note: When the settings are changed, the old
settings are overwritten. Make a note of the
current settings before making changes.
The settings are not cleared even when the
vehicle’s battery is disconnected.
See
page
Item
Description
LANGUAGES Set the audio language, subtitle →P24
language and menu language.
TV SCREEN Set the screen size according to
the type of TV monitor being used.
→P26
→P27
COUNTRY
CODE
Set the country code when
setting the rating level.
Changing the
language settings
The audio language, subtitle language and
menu language can be set according to your
preferences.
RATING
LEVEL
Set the rating level (parental →P28
lock).
DOWN
SAMPLING
Takes DVD digital sound and →P30
converts it into 48K/16BIT
sampling digital sound.
DIGITAL OUT Set the digital output.
LED Set whether the front panel’s →P34
INDICATOR LED indicators are on or off.
→P32
Select “LANGUAGES” under
“Changing the default settings
(SET UP)” on page 24.
CUSTOM
SETUP
Set the Closed Caption and →P35
Ai-NET setting.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP
Changing the language settings
ORIGINAL
The disc is played with the audio
language set as the priority language for
the disc. (AUDIO only)
Use the “Joystick” to
make the selection, then
press “ENT”.
AUTO
The disc is played with the subtitle
language set as the priority language for
the disc. (SUBTITLE only)
OTHERS
Set this to play the disc with a language
other than one of the languages dis-
played. Use the keys “0” to “9” to input
the 4-digit country code, then press
“ENT”. For the country codes, refer to
“List of language codes” (page 61).
AUDIO
Set the audio language produced from
the speakers.
Use the “Joystick” to select the
desired language, then press
“ENT”.
SUBTITLE
Set the language of the subtitles dis-
played on the screen.
MENU LANGUAGE
Set the language used for the menus (title
menu, etc.).
The setup screen for the selected
language is displayed.
Displays the setting contents.
SET UP
AUDIO
(audio languages)
Notes:
SUBTITLE
• If the disc does not include the selected
language, the disc’s default language is set.
• Languages set upon shipment from the factory:
Audio language : ORIGINAL
(subtitle languages)
Subtitle language : AUTO
Menu language : AUTO
• Press “RTN” to return to the previous screen.
Press “SET” for at least
2 seconds.
The settings are stored and
the set up mode is canceled.
MENU
LANGUAGE
(menu languages)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP
Changing the TV screen settings
Changing the TV
screen settings
Use the procedure described below to set
the output screen according to the type of
TV monitor being used.
Select “TV SCREEN” under
“Changing the default settings
(SET UP)” on page 24.
Use the “Joystick” to
make the selection,
then press “ENT”.
4 : 3 LETTERBOX
Select this when connected to a conventional
4:3 size (normal TV aspect ratio) monitor.
There may be black stripes visible at the top
and bottom of the screen. The width of these
stripes will depend upon the original aspect
ratio of the theatrical release of the movie.
～
4 : 3 PAN-SCAN
Select this when connected to a conventional
4:3 size monitor. The picture will fill the entire
TV screen. However, due to the mismatch in
aspect ratio, parts of the movie at the extreme
left and right sides will not be visible.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP
Changing the country code setting
16 : 9 WIDE
Press “ENT” to reset the
country code.
Select this when connected to a wide screen
TV. This is selected upon shipment from the
factory.
Use keys “0” to “9” to input the
4-digit country code, then press
“ENT”.
Displays the setting contents.
1
2
3
SUB T. ON/OFF. AUDIO
4
7
5
ANGLE
6
9
8
OP/
CL 0
US : 8583
Notes:
• For some discs, the picture may not be set to the
selected screen size. (For details, refer to the
explanation on the disc’s jacket.)
• Press “RTN” to return to the previous screen.
Press “SET” for at least
2 seconds.
Displays the setting contents.
SET UP
The settings are stored
and the set up mode is
canceled.
Changing the country
code setting
Set the country code when setting the
rating level (Parental lock).
Notes:
• Can be erased one digit at a time each time
“CLR” is pressed.
• Press “RTN” to return to the previous screen.
Select “COUNTRY CODE” under
“Changing the default settings
(SET UP)” on page 24.
Press “SET” for at least
2 seconds.
The settings are stored
and the set up mode is
canceled.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP
Setting the rating level (parental lock)
Setting the rating
level (parental lock)
Use this function to restrict the viewing
of movies to children of appropriate
age levels only.
Select “RATING LEVEL” under
“Changing the default settings
(SET UP)” on page 24.
Press “ENT”.
The password input mode is set.
Use keys “0” to “9” to input the 4-
digit password.
The password is set to 1111 is upon
shipment from the factory.
1
2
3
SUB T. ON/OFF. AUDIO
4
7
5
ANGLE
6
9
8
OP/
CL 0
Input numbers are
displayed “ ”.
～
Press “ENT”.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP
Setting the rating level (parental lock)
Use the “Joystick” to select the
• Changing the rating level temporarily
Some discs may request that you change the
rating level set in the default settings during
playback. In this case, the following message
appears on the screen:
rating level, then press “ENT”.
Select “OFF” to cancel the parental lock
or if you do not want to set a rating level.
The higher the number, the higher the
rating level.
Tips
Still picture
Still Picture
When this appears, if you do not input the correct
password either playback does not continue or a
picture for a different rating level is played.
Displays the setting contents.
Note: Press “RTN” to return to the previous
screen.
Press “SET” for at least
2 seconds.
SET UP
The settings are stored
and the set up mode is
canceled.
Notes:
• If you want to change the password, select
“CHANGE PASSWORD”, then input the new
password (4 digits).
• Write down the password on a piece of paper and
store the piece of paper somewhere in case you
forget it.
• On unrated DVDs, playback will not be restricted
even if the rating level is set.
• Once set, this rating level remains in memory
until changed. To enable the play of discs of
higher rating levels or to cancel the parental lock,
the setting must be changed.
• Not all DVDs provide a Parental Lock feature. If
you are unsure about a DVD, play it first to
confirm. Do not leave DVDs accessible to young
children for whom you deem them inappropriate.
.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP
Changing the down sampling setting
Changing the down
sampling setting
Converts linear PCM (LPCM) voice
signals recorded on the DVD disc to
downsampling 48 kHz/16 bit digital
signals and outputs them from the optical
cable.
Select “DOWN SAMPLING” under
“Changing the default settings
(SET UP)” on page 24.
Move the “Joystick” up and
down to choose ON or OFF and,
then press “ENT”.
ON
The digital signals recorded on the DVD
disc with 96K/24bit, 48K/24bit, 48K/20bit
sampling are converted into digital signals
with 48K/16bits sampling for output from
the optical cable.
OFF
The digital signals recorded on the DVD
disc with 96K/24bit, 48K/24bit, 48K/20bit
sampling are not converted into digital
signals with 48K/16bits sampling. They
are not output from the optical cable.
Set to ON at time of shipment from
factory.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP
Changing the down sampling setting
Displays the setting contents.
Note: Press “RTN” to return to the previous
screen.
Press “SET” for at least
2 seconds.
The settings are stored
and the set up mode is
canceled.
SET UP
31
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP
Changing the digital output setting
Changing the digital
output setting
Use the following procedure to set the
audio signal output from the DVA-5205.
Select “DIGITAL OUT” under
“Changing the default settings
(SET UP)” on page 24.
Use the “Joystick” to make the
selection, then press “ENT”.
AUTO
The digital output is switched automatically
according to the type of audio signals being
played.
Be sure to select “AUTO” when you want to
connect a digital audio processor and play
Dolby Digital audio. “AUTO” is selected upon
shipment from the factory.
LPCM
The audio signals recorded on the disc are
converted into 48 kHz/16 bit (for DVDs) or 44.1
kHz (for video CDs and CDs) linear PCM audio
signals for output.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP
Changing the digital output setting
Displays the setting contents.
Press “SET” for at least
2 seconds.
The set up are stored and
the set up mode is canceled.
Note: Press “RTN” to return to the previous
screen.
• Audio output/Optical digital audio output
Disc
Audio recording
format
Digital output
setting
Down sampling Optical digital audio Analog audio
setting
output (when a
digital audio
processor is
connected)
output (Ai-NET,
RCA output)
DVD
DTS
AUTO
LPCM
AUTO
LPCM
AUTO
LPCM
AUTO
LPCM
ON
OFF
DTS
X
X
DTS
ON
X
X
SET UP
OFF
X
X
Dolby Digital
ON
Dolby Digital
O
O
O
O
O
O
O
O
O
O
O
O
O
O
OFF
Dolby Digital
ON
LPCM (48kHz/16 bit)
OFF
x
Linear PCM
(48 kHz)
ON
LPCM (48kHz/16 bit)
OFF
x
ON
LPCM (48kHz/16 bit)
OFF
x
Linear PCM
(96 kHz)
ON
LPCM (48kHz/16 bit)
x
OFF
ON
LPCM (48kHz/16 bit)
x
OFF
Video CD
CD
MPEG
AUTO or LPCM
AUTO or LPCM
ON or OFF
ON or OFF
LPCM (44.1kHz)
LPCM (44.1kHz)
Linear PCM
33
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP
Changing the LED indicator setting
Changing the LED
indicator setting
Use the following procedure to set whether or
not the product’s LED indicators are on or off.
Select “LED INDICATOR” under
“Changing the default settings
(SET UP)” on page 24.
Use the “Joystick” to select the
“ON” or “OFF”, then press
“ENT”.
ON
The LED indicators are lit, indicating the
product’s operating status. “ON” is selected
upon shipment from the factory.
OFF
The LED indicators are turned off.
When “OFF” is set, the indicators do not light
even when the power is on.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP
Custom setting – Changing the Closed Caption
Displays the setting contents.
Move the “ Joystick” up and
down to select “ON” or “OFF”,
then press “ENT”.
Note: Press “RTN” to return to the previous
screen.
Press “SET” for at
least 2 seconds.
The settings are stored
and the set up mode is
canceled.
ON
Displays the closed captions.
Custom setting –
Changing the Closed
Caption setting
DVD includes so-called “closed captions”
which describe the scene to persons with
impaired hearing. It is possible to turn the
closed captions ON and OFF.
OFF
Does not display the closed captions.
Set to OFF at time of shipment from
factory.
Displays the setting contents.
SET UP
Select “CUSTOM SETUP” under
“Changing the default settings
(SET UP)” on page 24.
Move the “ Joystick” up and
down to select “CLOSED CAP-
TION”, then press “ENT”.
Notes:
• Please be aware that closed captions are
different from titles.
• Press “RTN” to return to the previous screen.
Press “SET” for at
least 2 seconds.
The settings are stored
and the set up mode is
canceled.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP
Custom setting – Changing the Ai-NET settings
Custom setting –
Changing the Ai-NET
settings
The Ai-NET settings are used to output the
sound of connected Ai-NET products.
Select “CUSTOM SETUP” under
“Changing the default settings
(SET UP)” on page 24.
Use the “Joystick” to select “Ai-
NET SETUP”, then press “ENT”.
Use the “Joystick” to select
“DVD” or “CD”, then press
“ENT”.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP
Custom setting – Changing the Ai-NET settings
DVD
Press “SET” for at least
2 seconds.
Set to “DVD” when connected to the CVA-1005/
IVA-C800.
The settings are stored
and the set up mode is
canceled.
Operations can be performed using the CVA-
1005/IVA-C800’s main menu screen.
For details, refer to the operating instructions of
the CVA-1005/IVA-C800.
“DVD” is selected upon shipment from the
factory.
CD
Turn off the vehicle’s ignition, then turn
it on again.
Set to “CD” when connected to an Ai-NET
product (head unit) other than the CVA-1005/
IVA-C800.
Operations can be performed from the head
unit.
For details, refer to “Operating from the head
unit” (page 56).
Displays the setting contents.
Notes:
• Press “RTN” to return to the previous screen.
• Operations cannot be performed using the main
menu screen if the Ai-NET setting is set to “CD”
when connected to the CVA-1005/IVA-C800.
• If the Ai-NET setting is set to “DVD” when
connected to an Ai-NET compatible head unit
other than the CVA-1005/IVA-C800, the only
operation possible from the head unit is the
volume adjustment operation.
SET UP
• When the Ai-NET setting is set to “CD”, the
operable functions and displays may differ
depending on the connected Ai-NET compatible
head unit.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP
Custom setting – Changing the H.U. CONTROL settings
Custom setting –
Changing the H.U.
CONTROL settings
When connecting this equipment with an
Ai-NET compatible head unit or an Ai-
NET compatible AV head unit (CVA-1005/
IVA-C800), set the equipment so that it is
possible to control from the head unit.
Select “CUSTOM SETUP” under
“Changing the default settings
(SET UP)” on page 24.
Move the “Joystick” up and
down to select “H.U. CONTROL”,
then press “ENT”.
Move the “Joystick” up and
down to select “ON” or “OFF”,
then press “ENT”.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
SET UP
Custom setting – Changing the H.U. CONTROL settings
ON
Possible to operate from an Ai-NET
compatible head unit or an Ai-NET
compatible AV head unit (CVA-1005/IVA-
C800).
OFF
Not possible to operate from an Ai-NET
compatible head unit or an Ai-NET
compatible AV head unit (CVA-1005/IVA-
C800). Set to OFF at time of shipment
from factory.
Displays the setting contents.
Note: Press “RTN” to return to the previous
screen.
Press “SET” for at
least 2 seconds.
The settings are stored
and the set up mode is
canceled.
SET UP
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the digital audio processor (optional)
DVD
Video CD
Operating the
digital audio
CD
processor (optional)
When used with a digital audio processor (PXA-
H510), operation is possible from the remote
control unit included with the DVA-5205. Also
refer to the PXA-H510’s operating instructions.
During playback,
press “A.PROC”.
The setting menu appears.
Use the “Joystick” to
make the selection, then
press “ENT”.
For the procedure after
making a selection, refer
to the pages indicated on
the table below.
See
Item
Description
page
PARAMETRIC- Adjust the parametric equalizer’s band frequency, →P41
EQ
band width and level.
SURROUND
Select one of six surround modes according to the →P42
music source using DSP (digital signal processing).
PRIVATE-
MEMORY
Store and recall up to six parametric equalizer
adjustments and settings.
→P43
→P45
TIME-
Eliminate time delays resulting from the distance
CORRECTION between the listening position and the speakers.
DOLBY
SURROUND
MODE
Switch between the Dolby Digital input and the Pro →P45
Logic input.
ADJUST
MODE
Adjust the speaker mode, speaker level, etc.
Adjust the volume, fader, balance, etc.
→P46
→P53
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the parametric equalizer
Adjusting the
parametric equalizer
Use the “Joystick” to select the
band width (Q-FACT), then press
“ENT”.
Select “PARAMETRIC-EQ” under
“Operating the digital audio
processor (optional)” on page 40.
Use the “Joystick” to adjust the
band width, then press “ENT”.
Use the “Joystick” to select the
band to be set, then press “ENT”.
The band whose frequency is indicated in
yellow can be adjusted. The parametric
equalizer’s setting screen consists of two
pages. Press “BAND” for at least 2
seconds to switch between pages 1 and
2.
Use the “Joystick” to select the
level (LV), then press “ENT”.
Use the “Joystick” to adjust the
level, then press “ENT”.
Note: Press “RTN” to return to the previous
screen.
Use the “Joystick” to adjust the
frequency, then press “ENT”.
Press “A.PROC”
to close the
digital audio
processor screen
and return to the play-
back screen.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the surround settings
Adjusting the
surround settings
This adjustment is not possible when Dolby
Digital or Pro Logic is turned on for the DVA-
5205’s audio output.
Select “SURROUND” under
“Operating the digital audio
processor (optional)” on page 40.
Use the “Joystick” to select the
surround mode, then press “ENT”.
There are six surround modes.
Press “ENT”.
The level (LV) value turns
yellow.
Use the “Joystick” to adjust the
level (LV), then press “ENT”.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing the surround settings
Use the “Joystick” to select
“WRITE”, then press “ENT”.
Use the “Joystick” to select the
time (echo time), then press
“ENT”.
Use the “Joystick” to adjust the
time, then press “ENT”.
Use the “Joystick” to select the
number at which you want to store
the settings (“PRIVATE-MEMORY
1” to “PRIVATE-MEMORY 6”), then
press “ENT”.
Note: Press “RTN” to return to the previous
screen.
Press “A.PROC”
to close the
digital audio
processor screen
and return to the play-
back screen.
Note: Press “RTN” to return to the previous
DVD
Video CD
screen.
Storing the
surround settings
Select “PRIVATE-MEMORY” under
“Operating the digital audio
CD
Press “A.PROC”
to close the
digital audio
processor screen
and return to the play-
back screen.
processor (optional)” on page 40.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Recalling the surround settings
DVD
Video CD
Recalling the
surround settings
CD
Select “PRIVATE-MEMORY” under
“Operating the digital audio
processor (optional)” on page 40.
Use the “Joystick” to select the
number of the settings you wish
to recall (“PRIVATE-MEMORY 1” to
“PRIVATE-MEMORY 6”), then
press “ENT”.
Note: Press “RTN” to return to the previous
screen.
Press “A.PROC”
to close the
digital audio
processor screen
and return to the play-
back screen.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the time compensation
Using the Pro Logic mode
DVD
Video CD
DVD
Video CD
Adjusting the
Using the Pro
Logic mode
CD
CD
time compensation
Select “DOLBY SURROUND
MODE” under “Operating the
digital audio processor (optional)”
on page 40.
Select “TIME-CORRECTION”
under “Operating the digital audio
processor (optional)” on page 40.
Use the “Joystick” to make the
selection, then press “ENT”.
Use the “Joystick” to select the
speaker to be adjusted, then
press “ENT”.
Use the “Joystick” to adjust the
time, then press “ENT”.
DOLBY DIGITAL
“DOLBY DIGITAL” is set automatically
when the disc is Dolby Digital compatible
and the DVD video player’s audio output
setting is set to “AUTO”.
DOLBY PRO LOGIC
“DOLBY PRO LOGIC” or “OFF” can be
selected when the disc is Dolby Pro Logic
compatible and the DVD video player’s
audio output setting is set to “LPCM”.
When “OFF” is selected, the surround
settings cannot be adjusted.
Note: Press “RTN” to return to the previous
screen.
Press “A.PROC”
to close the
Note: Press “RTN” to return to the previous
screen.
digital audio
processor screen
and return to the play-
back screen.
Press “A.PROC”
to close the
digital audio
processor screen
and return to the play-
back screen.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUST – Setting the speaker mode
DVD
Video CD
ADJUST –
CD
Setting the
speaker mode
This adjustment cannot be made when
Dolby Pro Logic is set to “OFF”.
Select “ADJUST” under “Operat-
ing the digital audio processor
(optional)” on page 40.
Use the “Joystick” to select the
speaker to be set (“FRONT”,
“CENTER” or “REAR”), then press
“ENT”.
Use the “Joystick” to switch the
mode.
FRONT
LARGE/SMALL
CENTER
OFF/LARGE/SMALL
REAR
OFF/LARGE/SMALL
Note: Press “RTN” to return to the previous
screen.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUST – Adjusting the acoustic image
Press “A.PROC”
to close the
Use the “Joystick” to select the
level item, then press “ENT”.
digital audio
processor screen
and return to the play-
back screen.
DVD
Video CD
ADJUST –
CD
Use the “Joystick” to
adjust the level, then press “ENT”.
Adjusting the
acoustic image
This adjustment cannot be made when
Dolby Pro Logic is set to “OFF”.
Select “ADJUST” under “Operat-
ing the digital audio processor
(optional)” on page 40.
Note: Press “RTN” to return to the previous
screen.
Use the “Joystick” to select “BI-
PHANTOM”, then press “ENT”.
Press “A.PROC”
to close the
digital audio
processor screen
and return to the play-
back screen.
Use the “Joystick” to select the
mode (“ON” or “OFF”), then press
“ENT”.
Note: The “BI-PHANTOM” setting is automatically
set to “OFF” when the center speaker is set
to “OFF”.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUST – Mixing the rear audio channels
DVD
Video CD
ADJUST –
CD
Mixing the rear
audio channels
Use this function to mix the audio signals
for the front to those output from the rear
speakers.
Select “ADJUST” under “Operat-
ing the digital audio processor
(optional)” on page 40.
Use the “Joystick” to
select “REAR MIX”, then press
“ENT”.
Use the “Joystick” to select the
mode (“ON” or “OFF”), then press
“ENT”.
Note: The “REAR MIX” setting is automatically set
to “OFF” when the rear speaker is set to
“OFF”.
Use the “Joystick” to select the
level item, then press “ENT”.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUST – Center speaker time compensation
DVD
Video CD
ADJUST –
Center speaker
time compensation
Use the “Joystick” to adjust the
level, then press “ENT”.
CD
Compensation is not possible when the
center speaker is set to “OFF”.
Select “ADJUST” under “Operat-
ing the digital audio processor
(optional)” on page 40.
Note: Press “RTN” to return to the previous
screen.
Use the “Joystick” to select
“CENTER DELAY”, then press
“ENT”.
Press “A.PROC”
to close the
digital audio
processor screen
and return to the play-
back screen.
Use the “Joystick” to adjust the
level, then press “ENT”.
Note: Press “RTN” to return to the previous
screen.
Press “A.PROC”
to close the
digital audio
processor screen
and return to the play-
back screen.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUST – Rear speaker time compensation
DVD
Video CD
ADJUST –
Rear speaker time
compensation
CD
Compensation is not possible when the
rear speakers are set to “OFF”.
Select “ADJUST” under “Operat-
ing the digital audio processor
(optional)” on page 40.
Use the “Joystick” to select
“REAR DELAY”, then press
“ENT”.
Use the “Joystick” to adjust the
level, then press “ENT”.
Note: Press “RTN” to return to the previous
screen.
Press “A.PROC”
to close the
digital audio
processor screen
and return to the play-
back screen.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUST – Achieving powerful sound at low volumes
DVD
Video CD
ADJUST –
Press “A.PROC”
to close the
digital audio
processor screen
and return to the play-
back screen.
CD
Achieving powerful
sound at low volumes
This setting is only possible with Dolby
Digital outputs.
Select “ADJUST” under “Operat-
ing the digital audio processor
(optional)” on page 40.
Use the “Joystick” to select
“LISTENING”, then press “ENT”.
Use the “Joystick” to select the
mode.
L-NIGHT
For powerful sound at low volumes (to
compensate for high levels of background
noise such as road noise)
STANDARD
For more powerful sound at regular
volumes
MAXIMUM
For the regular sound
Note: Press “RTN” to return to the previous
screen.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUST – Adjusting the speaker level
DVD
Video CD
ADJUST –
CD
Adjusting the
speaker level
Select “ADJUST” under “Operat-
ing the digital audio processor
(optional)” on page 40.
Press “BAND” for at least 2
seconds to switch the “ADJUST”
screen.
Use the “Joystick” to select
“TEST TONE”, then press “ENT”.
Use the “Joystick” to select “ON”,
then press “ENT”.
Test tones are produced for two seconds
from each speaker.
Note: Test tones are not produced from the center
and rear speakers when these speakers are
set to “OFF”.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
MODE – Adjusting the volume, fader and balance
DVD
Video CD
MODE –
Use the “Joystick” to select the
speaker, then press “ENT”.
Adjust so that the volume level from the
different speakers is the same.
CD
Adjusting the volume,
fader and balance
When a head unit is connected using Ai-NET
connections, adjust the volume, fader and
balance from the head unit.
Select “MODE” under “Operating
the digital audio processor
(optional)” on page 40.
Use the “Joystick” to select the
item to be adjusted, then press
“ENT”.
Use the “Joystick” to adjust the
level, then press “ENT”.
Note: Press “RTN” to return to the previous
screen.
Once the levels of
all the speakers
have been
adjusted, either
set “TEST TONE” to
Use the “Joystick” to adjust.
“OFF” or press “A.PROC” to close
the digital audio processor screen
and return to the playback screen.
Note: Press “RTN” to return to the previous
screen.
Press “A.PROC”
to close the
digital audio
processor screen
and return to the play-
back screen.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
MODE – Adjusting the subwoofer
DVD
Video CD
MODE –
CD
Adjusting the
subwoofer
Select “MODE” under “Operating
the digital audio processor
(optional)” on page 40.
Use the “Joystick” to select “SUB-
W”, then press “ENT”.
Use the “Joystick” to select the
mode (“ON” or “OFF”), then press
“ENT”.
Note: The subwoofer cannot be adjusted when set
to “OFF”.
Use the “Joystick” to select the
level item, then press “ENT”.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
MODE – Turning the defeat function on and off
DVD
Video CD
MODE –
Turning the defeat
function on and off
Use the “Joystick” to adjust the
level, then press “ENT”.
CD
Select “MODE” under “Operating
the digital audio processor
(optional)” on page 40.
Use the “Joystick” to select
“DEFEAT”, then press “ENT”.
Note: Press “RTN” to return to the previous
screen.
Press “A.PROC”
to close the
digital audio
processor screen
and return to the play-
back screen.
Use the “Joystick” to select the
mode (“ON” or “OFF”), then press
“ENT”.
ON
:
The response is flat.
OFF : Off
Notes:
• When “DEFEAT” is set to “ON”, the “PARAMET-
RIC-EQ”, “SURROUND”, “PRIVATE-MEMORY”
and “TIME-CORRECTION” settings cannot be
adjusted.
• Press “RTN” to return to the previous screen.
Press “A.PROC”
to close the
digital audio
processor screen
and return to the play-
back screen.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating from the head unit
CDA-7965
(head unit)
DVA-5205
(player)
Operating from the head unit
The DVA-5205 can also be operated from the head unit.
This section describes operations from the CDA-7965 (the recommended head unit).
Note that some of the functions cannot be operated from the DVA-5205.
Playing DVDs, video CDs and CDs
Press “SOURCE” and select the
CD (DVA-5205) mode.
The mode switches each time the button
is pressed.
CD (Built-in)
CD(DVA-5205)
( * only when a changer is connected.)
TUNER
CHANGER *
The DVA-5205’s power is on when the CD
mode is selected, off when other modes
are selected.
To set the pause mode, press
“
”.
Press “
” again to resume playback.
Note: Playback starts at the beginning of the disc whenever ignition is turned off or another Ai-NET source
is selected.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating from the head unit
Displaying the CD title
Press “TITLE” to display the CD title, etc., on the head unit’s display.
Press “TITLE” on the head unit.
The display pattern changes each time
the button is pressed.
Operation display
Clock display mode
Clock display
Text display mode
Text display mode
Title display mode
Title display*3
Track Name display*2
(CDA-7965) TRACK NO./TIME*1
Disc Name display*2
Notes:
*1In the TRACK NO./TIME display mode the time display shows 0:00 and does not move.
*2Displayed during playback of a text compatible CD (when using an optional text compatible). “NO TEXT” will
be displayed when the CD is not text compatible.
*3“--------” will be displayed when the title has not been inputted.
<Functions operable from the CDA-7965>
Switch
Operation
SOURCE
Turns the power on and off.
When pressed again, the source switches.
The DVD player’s power is on when the CD mode is selected, off when other modes
are selected.
TITLE
RPT
Switches the display pattern. / Sets the title input mode.
DVD: Chapter repeat
Video CD/CD: Switches between track repeat and disc repeat
f
c
Starts playback from the beginning of the following chapter/track.
When pressed and held in, fast-forwards the disc.
Starts playback from the beginning of the current chapter/track.
When pressed and held in, fast-reverses the disc.
:/j
Switches between play and pause.
Adjust the volume.
Rotary Encoder
Notes:
• The functions and operations may differ when using with a head unit other than the CDA-7965.
• For video CDs with playback control (PBC), turn PBC off.
• Titles can be input for video CDs and CDs. For details, refer to the operating instructions of the connected
head unit.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating from the head unit’s remote control unit
Operating from the head unit’s remote control
unit
The DVA-5205 can be operated from the remote control unit included with the head unit.
Remote control operations
Remote Control
RUE-4185
RUE-4160
RUE-4165
unit
Operation
P10 Power on/off
O
O
O
O
O
O
O
O
O
O
O
O
P14 Fast-forward/fast-reverse
P15 Still picture (pause)
P14 Chapter/track search
•
There may be restrictions to some of the functions and displays depending on the
Ai-NET compatible product (head unit/remote control unit) being used.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating from the head unit’s remote control unit
ENT
ENT
ENT
SOURCE
AUDIO
SEL
RUE-4185
RUE-4160
RUE-4165
Operating DVDs, video CDs and CDs
First see “Remote control operations” (page 58).
Press “SOURCE” , “AUDIO SEL” or “A. SEL”to set the CD (DVA-5205)
mode.
1
The DVA-5205’s power is on when the CD mode is selected, off when other modes are
selected.
To set the pause mode, press “
” or “ENT”.
2
3
Press “
” or “ENT” again to resume playback.
Press and hold “c” or “f” continuously to make FF or RW operation.
(RUE-4185, RUE-4160)
Tilt and hold the joystick in left or right direction to make FF or RW opera-
tion. (RUE-4165)
Press “c” or “f” to make a track or chapter skip. (RUE-4185, RUE-4160)
Tilt the joystick in left or right direction to make a track or chapter skip.
(RUE-4165)
4
Notes:
• For adjusting the volume and other basic operations, refer to the head unit’s operating instructions.
• For video CDs with playback control (PBC), turn PBC off.
Do not operate or view the display while driving.
Warning
Drivers should not operate the product or view the display while driving. Doing so
could be distracting, leading to accidents. Always stop the vehicle in a safe place
before operating the product or viewing the display.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Terminology
Terminology
Dolby Digital (AC-3)
DTS
Dolby Digital (AC-3) is a digital audio
compression technology developed by
Dolby Laboratories. It is compatible with
not only stereo (2-channel) sound, but
also 5.1-channel surround sound. The
signals for the different channels are
completely independent, so large quanti-
ties of audio data can be recorded
This is a home-use digital sound format of
the DTS Sound System, a high quality
sound system for use in movie theaters
which was developed by Digital Theater
Systems Corp.
DTS has six independent sound tracks. It
realizes DTS surround sound with a
superior feeling of presence for use in
efficiently on discs, and since the sound is theaters and other settings.
digital there is little loss of sound quality.
DTS is the abbreviation for Digital Theater
System.
* The separately sold digital audio
processor (PXA-H510) is required to
enjoy Dolby Digital sound.
* To enjoy DTS surround sound you need
the separately sold DTS digital audio
processor. The DVD video software
should be compatible with DTS.
Dolby Pro Logic
Dolby Pro Logic is a Dolby Surround
format which restores four channels of
signals recorded onto two channels back
to four channels (front left/right, center
and rear surround (monaural)) upon
playback.
* The separately sold digital audio
processor (PXA-H510) is required to
enjoy Dolby Pro Logic sound.
Center
speaker
Front
speakers
Linear PCM audio (LPCM)
LPCM is a signal recording format used
for music CDs. Whereas music CDs are
recorded at 44.1 kHz/16 bits, DVDs are
recorded at 48 kHz/16 bits to 95 kHz/24
bits, thereby achieving higher sound
quality than music CDs.
Rear
speakers
Rating levels (parental lock)
This is a function of the DVD for restricting
the viewing age as stipulated by laws in
different countries. The way in which
viewing is restricted differs from DVD to
DVD. Sometimes the DVD cannot be
played at all, other times certain scenes
are skipped, and other times certain
scenes are replaced with other scenes.
Subwoofer
Speaker layout for enjoying
Dolby Digital sound/dts sound
60
Download from Www.Somanuals.com. All Manuals Search And Download.
List of language codes
List of language codes
(For details, see page 25.)
Abbreviation
AA
AB
AF
Code
6565
6566
6570
6577
6582
6583
6589
6590
6665
6669
6671
6672
6673
6678
6679
6682
6765
6779
6783
6789
6865
6869
6890
6976
6978
6979
6983
6984
6985
7065
7073
7074
7079
7082
7089
7165
7168
7176
7178
7185
7265
7273
7282
7285
Language
Abbreviation
HY
IA
Code
7289
7365
7369
7375
7378
7383
7384
7387
7465
7473
7487
7565
7575
7576
7577
7578
7579
7583
7585
7589
7665
7678
7679
7684
7686
7771
7773
7775
7776
7778
7779
7782
7783
7784
7789
7865
7869
7876
7879
7967
7977
7982
8065
8076
Language
Armenian
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Interlingua
Interlingue
Inupiak
IE
AM
AR
AS
AY
IK
IN
Indonesian
Icelandic
Italian
Assamese
Aymara
Azerbaijani
Bashkir
Belorussian
Bulgarian
Bihari
IS
IT
AZ
IW
Hebrew
BA
BE
BG
BH
BI
JA
Japanese
Yiddish
JI
JW
KA
KK
KL
Javanese
Georgian
Kazakh
Bislama
Bengali, Bangla
Tibetan
Breton
BN
BO
BR
CA
CO
CS
CY
DA
DE
DZ
EL
Greenlandic
Cambodian
Kannada
Korean
KM
KN
KO
KS
KU
KY
LA
Catalan
Corsican
Czech
Kashmiri
Kurdish
Welsh
Kirghiz
Danish
Latin
German
Bhutani
Greek
LN
Lingala
LO
LT
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
EN
EO
ES
ET
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
LY
MG
MI
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NL
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
EU
FA
FI
FJ
Fiji
FO
FR
FY
Faroese
French
Malay
Maltese
Burmese
Nauru
Frisian
GA
GD
GL
GN
GU
HA
HI
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Nepali
Dutch
NO
OC
OM
OR
PA
Norwegian
Occitan
(Afan) Oromo
Oriya
Hindi
HR
HU
Croatian
Hungarian
Punjabi
PL
Polish
61
Download from Www.Somanuals.com. All Manuals Search And Download.
List of language codes
List of language codes (Continued)
(For details, see page 25.)
Abbreviation
PS
Code
8083
8084
8185
8277
8278
8279
8285
8287
8365
8368
8371
8372
8373
8375
8376
8377
8378
8379
8381
8382
8383
8384
8385
8386
Language
Pashto, Pushto
Abbreviation
SW
TA
Code
8387
8465
8469
8471
8472
8473
8475
8476
8478
8479
8482
8483
8484
8487
8575
8582
8590
8673
8679
8779
8872
8979
9072
9085
Language
Swahili
Tamil
PT
Portuguese
Quechua
Rhaeto-Romance
Kirundi
QU
RM
RN
RO
RU
TE
Telugu
Tajik
TG
TH
Thai
Romanian
Russian
TI
Tigrinya
Turkmen
Tagalog
TK
RW
SA
Kinyarwanda
Sanskrit
TL
TN
Setswana
Tongan
Turkish
Tsonga
Tatar
SD
Sindhi
TO
SG
SH
Sangho
TR
Serbo-Croatian
Singhalese
Slovak
TS
SI
TT
SK
TW
UK
UR
UZ
Twi
SL
Slovenian
Samoan
Ukrainian
Urdu
SM
SN
Shona
Uzbek
Vietnamese
Volapuk
Wolof
SO
SQ
SR
Somali
VI
Albanian
Serbian
VO
WO
XH
YO
SS
Siswati
Xhosa
Yoruba
Chinese
Zulu
ST
Sesotho
SU
Sundanese
Swedish
ZH
SV
ZU
62
Download from Www.Somanuals.com. All Manuals Search And Download.
List of country codes
List of country codes
Abbreviation
AD
AE
AF
Code
6568
6569
6570
6571
6573
6576
6577
6578
6579
6581
6582
6583
6584
6585
6587
6590
6665
6666
6668
6669
6670
6671
6672
6673
6674
6677
6678
6679
6682
6683
6684
6686
6687
6689
6690
6765
6767
6768
Country
Abbreviation
CL
Code
6776
6777
6778
6779
6782
6785
6786
6788
6789
6790
6869
6874
6875
6877
6879
6890
6967
6969
6971
6972
6982
6983
6984
7073
7074
7075
7077
Country
Andorra
Chile
United Arab Emirates
Afghanistan
Antigua and Barbuda
Anguilla
CM
CN
CO
CR
CU
CV
Cameroon
China
AG
AI
Colombia
Costa Rica
Cuba
AL
Albania
AM
AN
AO
AQ
AR
AS
AT
Armenia
Cape Verde
Christmas Island
Cyprus
Netherlands Antilles
Angola
CX
CY
Antarctica
CZ
Czech Rempublic
Germany
Djibouti
Argentina
DE
American Samoa
Austria
DJ
DK
Denmark
Dominica
Dominican Republic
Algeria
AU
AW
AZ
Australia
DM
DO
DZ
Aruba
Azerbaijan
Bosnia and Herzegovina
Barbados
BA
BB
BD
BE
BF
EC
Ecuador
EE
Estonia
Bangladesh
Belgium
EG
EH
Egypt
Western Sahara
Eritrea
Burkina Faso
Bulgaria
ER
BG
BH
BI
ES
Spain
Bahrain
ET
Ethiopia
Burundi
FI
Finland
BJ
Benin
FJ
Fiji
BM
BN
BO
BR
BS
BT
Bermuda
FK
Falkland Islands
Brunei Darussalam
Bolivia
FM
Micronesia, Federated
States of
FO
FR
GA
GB
GD
GE
GF
GH
GI
7079
7082
7165
7166
7168
7169
7170
7172
7173
7176
7177
7178
7180
7181
7182
Faroe Islands
France
Brazil
Bahamas
Gabon
Bhutan
United Kingdom
Grenada
BV
BW
BY
BZ
Bouvet Island
Botswana
Georgia
Belarus
French Guiana
Ghana
Belize
CA
CC
CD
Canada
Gibraltar
Cocos (Keeling) Islands
GL
GM
GN
GP
GQ
GR
Greenland
Gambia
Congo, the Democratic
Republic of the
CF
CG
CH
CI
6770
6771
6772
6773
6775
Central African Republic
Congo
Guinea
Guadeloupe
Equatorial Guinea
Greece
Switzerland
Cote d’lvoire
Cook Islands
CK
63
Download from Www.Somanuals.com. All Manuals Search And Download.
List of country codes
List of country codes (Continued)
Abbreviation
Code
Country
Abbreviation
Code
7683
7684
7685
7686
7689
7765
7767
7768
7771
7772
7775
Country
GS
7183
South Georgia and the
South Sandwich Islands
LS
LT
Lesotho
Lithuania
GT
GU
GW
GY
HK
7184
7185
7187
7189
7275
7277
Guatemala
Guam
LU
LV
Luxembourg
Latvia
Guinea-Bissau
Guyana
LY
Libyan Arab Jamahiriya
Morocco
MA
MC
MD
MG
MH
MK
Hong Kong
Monaco
HM
Heard Island and
McDonald Islands
Moldova, Republic of
Madagascar
Marshall Islands
HN
HR
HT
HU
ID
7278
7282
7284
7285
7368
7369
7376
7378
7379
Honduras
Croatia
Haiti
Macedonia, The former
Yugoslav Republic of
Hungary
Indonesia
Ireland
Israel
ML
MM
MN
MO
MP
MQ
MR
MS
MT
MU
MV
MW
MX
MY
MZ
NA
NC
NE
NF
NG
NI
7776
7777
7778
7779
7780
7781
7782
7783
7784
7785
7786
7787
7788
7789
7790
7865
7867
7869
7870
7871
7873
7876
7879
7880
7882
7885
7890
7977
8065
8069
8070
8071
Mali
Myanmar
Mongolia
Macau
IE
IL
IN
India
Northern Mariana Islands
Martinique
Mauritania
Montserrat
Malta
IO
British Indian Ocean
Territory
IQ
IR
7381
7382
7383
7384
7477
7479
7480
7569
7571
7572
7573
7577
7578
7580
Iraq
Iran, Islamic Republic of
Iceland
IS
Mauritius
Maldives
IT
Italy
JM
JO
JP
KE
KG
KH
KI
Jamaica
Malawi
Jordan
Mexico
Japan
Malaysia
Kenya
Mozambique
Namibia
Kyrgyzstan
Cambodia
Kiribati
New Caledonia
Niger
KM
KN
KP
Comoros
Saint Kitts and Nevis
Norfolk Island
Nigeria
Korea, Democratic
People’s Republic of
Nicaragua
Netherlands
Norway
NL
KR
KW
KY
KZ
LA
7582
7587
7589
7590
7665
Korea, Republic of
Kuwait
NO
NP
NR
NU
NZ
OM
PA
Nepal
Cayman Islands
Kazakstan
Nauru
Niue
Lao People’s Democratic
Republic
New Zealand
Oman
LB
LC
LI
7666
7667
7673
7675
7682
Lebanon
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
Panama
PE
PF
Peru
LK
LR
French Polynesia
Papua New Guinea
PG
64
Download from Www.Somanuals.com. All Manuals Search And Download.
List of country codes
List of country codes (Continued)
Abbreviation
PH
PK
Code
8072
8075
8076
8077
8078
8082
8084
8087
8089
8165
8269
8279
8285
8287
8365
8366
8367
8368
8369
8371
8372
8373
8374
8375
8376
8377
8378
8379
8382
8384
8386
8389
8390
8467
8468
8470
8471
8472
Country
Philippines
Abbreviation
Code
8474
8475
8477
8478
8479
8480
8482
8484
8486
8487
8490
Country
TJ
TK
TM
TN
TO
TP
TR
TT
TV
TW
TZ
Tajikistan
Tokelau
Pakistan
PL
Poland
Turkmenistan
Tunisia
PM
PN
PR
PT
Saint Pierre and Miquelon
Pitcairn
Tonga
Puerto Rico
Portugal
East Timor
Tur ???
PW
PY
Palau
Trinidad and Tobago
Tuvalu
Paraguay
QA
RE
RO
RU
RW
SA
Qatar
Taiwan, Province of China
Reunion
Tanzania, United Republic
of
Romania
UA
UG
UM
8565
8571
8577
Ukraine
Uganda
Russian Federation
Rwanda
United States Minor
Outlying Islands
Saudi Arabia
Solomon Islands
Seychelles
SB
US
UY
UZ
VA
8583
8589
8590
8665
United States
Uruguay
SC
SD
SE
Sudan
Uzbekistan
Sweden
Holy See (Vatican City
State)
SG
SH
SI
Singapore
Saint Helena
Slovenia
VC
8667
Saint Vincent and the
Grenadines
VE
VG
VI
8669
8671
8673
8678
8685
8770
8783
8969
8984
8985
9065
9077
9087
Venezuela
Virgin Island, British
Virgin Islands, U.S
Viet Nam
SJ
Svalbard and Jan Mayen
Slovakia
SK
SL
Sierra Leone
San Marino
Senegal
VN
VU
WF
WS
YE
YT
YU
ZA
ZM
ZW
SM
SN
SO
SR
ST
Vanuatu
Wallis and Futuna
Samoa
Somalia
Suriname
Yemen
Sao Tome and Principe
El Salvador
Syrian Arab Republic
Swaziland
Mayotte
SV
Yugoslavia
South Africa
Zambia
SY
SZ
TC
Turks and Caicos Islands
Chad
Zimbabwe
TD
TF
French Southern Territories
Togo
TG
TH
Thailand
65
Download from Www.Somanuals.com. All Manuals Search And Download.
In case of difficulty
• If operation freezes, the screen goes black or the unit should otherwise not function properly, try turning
the power off then back on. Alternatively, try the following methods in the order listed until the DVA-5205
returns to normal playbak mode:
1) Change the source from DVD to another source then return to DVD mode.
2) Turn the car’s ignition OFF and back ON again.
3) Press the RESET button on the face of the DVA-5205.
• This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your
system is properly connected or consult your authorized Alpine dealer.
Symptom
Cause
Remedy
Unit does not
operate.
Fuse is blown.
Replace with a fuse of the specified capacity. (See
installation instructions.)
Monitor’s power is not turned on. Turn on the monitor’s power.
Condensation.
Wait a while (about 1 hour) for the condensation to
dry.
Operation is
unstable.
Remote control unit’s batteries
are worn.
Replace the remote control unit’s batteries with new
ones.
Remote control sensor or
transmitter is dirty.
Clean the sensor or transmitter.
No picture is
produced.
Monitor’s mode is not switched
to the mode you want to see.
Switch to the mode you want to see.
Monitor’s parking brake cord is
not connected.
Connect the monitor’s parking brake cord and set the
parking brake.
(For details, refer to the monitor’s instructions.)
Monitor’s parking brake is not
set.
Playback does not Disc is loaded upside-down.
start.
Check the disc and load it with the labeled side facing
upward.
Disc is dirty.
Clean the disc.
A disc not able to playback with Check if the disc is able to be played back
this unit is loaded.
Parental lock is set.
Cancel the parental lock or change the rating level.
Press “SET” to turn the menu off.
Setup menu is displayed.
Picture is unclear
or noisy.
Disc is being fast-forwarded or
fast-reversed.
The picture may be slightly disturbed, but this is
normal.
Vehicle’s battery power is weak. Check the battery power and wiring.
(The unit may malfunction if the battery power is
under 11 volts with a load applied.)
Monitor’s fluorescent tube is
worn.
Replace the monitor’s fluorescent tube.
Disc is scratched.
Replaced with a non-scratched disc.
Image stops
sometimes.
No disc is loaded.
Disc is dirty.
Load a disc.
NO DISC
Clean the disc.
Remote control operation is not For some discs or playing modes, certain operations
NOT VALID
possible.
are not possible. This is not a malfunction.
REGIONAL CODE Disc does not match regional
VIOLATION
Load a disc that matches the regional code number.
code number.
PAL disc is loaded.
Load an NTSC disc.
VIDEO SIGNAL
SYSTEM IS NOT
CORRECT
Protective circuit is activated to
high temperature.
Turn the power (main unit power when not connected)
OFF on the connected head unit and then turn the
power ON again. If the display still does not
HI-TEMP
disappear, leave the power OFF until the temperature
decreases and then turn the power ON again.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Signal system.................................... NTSC/PAL
Horizontal resolution ......................... 500 lines or greater
Video output level.............................. 1Vp-p (75 ohms)
Video S/N ratio .................................. DVD: 60 dB
Audio S/ N ratio
DVD: 95 dB
CD: 93 dB
Frequency response ......................... DVD: 5 Hz to 22 kHz (±1 dB) (48 kHz sampling)
DVD: 5 Hz to 44 kHz (±1 dB) (96 kHz sampling)
CD: 5 Hz to 20 kHz (±1 dB)
DVD: 90 dB or greater
CD: 93 dB or greater
Dynamic range
Wow & flutter ..................................... Below measurable limit
Channel separation ........................... 80 dB
Harmonic distortion ........................... 0.03%
Audio output ...................................... 800 mV
Power supply .................................... DC 14.4V (operating range: 11 to 16V)
Operating temperature range ............ –10° to +60°C
Weight ............................................... 1.6 kg (3 lbs. 8 oz)
External dimensions (W x H x D) ...... 178 x 50 x 185 mm (7” x 2” x 7-1/4”)
•
•
For improvement purposes, specifications and design are subject to change without
notice.
The illustrations in this manual may appear different from the actual product due to
printing conditions.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions of remote control unit buttons
Operating the DVA-5205 DVD Video Player
When operating the DVA-5205 set the DVD/AUDIO switch to the “DVD” side.
Joy Stick
1
Selects the items displayed on the
screen.
ENT button
2
3
1
Determines the selected item.
Rotary Encoder
Adjusts the volume when only the
ENT
q
2
3
Digital Audio Processor is connected.
MENU button
4
Displays the DVD menu.
SET button
w
e
4
5
Press for at least 2 seconds to
summon the SET UP (initial setting)
screen.
A. PROC DEFEAT MUTE
: Button
5
6
7
r
Playback.
SLOW Button
DISP.
RPT
TUNER DISC
CHG
Press at least 2 seconds for slow
motion playback.
8
9
p
t
y
.;; Button
Seeks the start for video and audio
data.
6
7
8
V. SEL
POWER
NTSC/PAL
A. PROC
BAND
Press at least 2 seconds for Fast
Forward of video and audio data.
::. Button
Seeks the start for video and audio
data.
Press at least 2 seconds for Rewind of
video and audio data.
1
2
3
u
i
a
s
SUB T. ON/OFF AUDIO
DISP. Button
4
7
5
ANGLE
6
9
Displays the playback state on the
screen.
o
;
8
OP/
DN
CLR
UP
+10
CL 0
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions of remote control unit buttons
RPT Button
SUB T. Button
9
p
u
i
o
;
Repeat playback.
POWER Button
Press for at least 2 seconds to change
the subtitles.
–ON/OFF Button
Turns the power ON and OFF.
NTSC/PAL Button
Press for at least 2 seconds to turn the
subtitles ON and OFF.
Press for at least 5 seconds to change
between NTSC and PAL.
ANGLE Button
Press for at least 2 seconds to change
the angle.
DVD/AUDIO Switch
q
w
Used to switch between DVD and
Audio operation.
CLR Button
Removes numbers (one character at a
time) that have been selected and
input.
Press for at least 2 seconds. All the
characters which were selected and
input are erased.
GO TO Button
Used to go directly to start of selec-
tion.
TITLE Button
Press for at least 2 seconds to display
the Title Menu.
AUDIO Button
a
s
RTN Button
e
r
Press for at least 2 seconds to change
the audio output.
Used to return the selection screen
just prior to the present screen.
10-Key Pad
V.OUT Button
Used to input numbers.
Used to switch between Video and
Audio output to the rear monitor.
../ ..: Button
Used for Pause and Frame-by-Frame
playback.
Note: Operation may not be accepted depending
on the type of disc and the playback
conditions. At such a time the following
mark is displayed on the screen:
■ Button
Used to stop playback.
A.PROC Button
t
y
Used to summon the processor
control screen when connected with
the Digital Audio Processor.
BAND Button
Press for at least 2 seconds to switch
the menu screen when controlling the
Digital Audio Processor.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions of remote control unit buttons
Operating audio for the Alpine Ai-NET
When operating audio for the Alpine Ai-NET, set the DVD/AUDIO switch to the “AUDIO” side.
Joy Stick
1
Music Sensor/Fast Forward/Rewind/
Disc Change/Preset Selection/SEEK
ENT Button
2
3
4
5
6
7
8
9
p
q
1
Play/Pause
Rotary Encoder
Volume adjustment
DISP Button
ENT
q
2
3
Spectrum Analyzer display ON/OFF
SOURCE Button
Source switching
w
e
4
5
A.PROC Button
Audio Processor Switch
DEFEAT Button
A. PROC DEFEAT MUTE
Defeat Mode ON/OFF.
TUNER Button
6
7
r
DISP.
RPT
TUNER DISC
CHG
Switches to Radio Mode.
DISC Button
8
9
p
t
y
Slave CD/MD mode switching.
Power Button
V. SEL
POWER
NTSC/PAL
A. PROC
BAND
Power ON/OFF switching.
DVD/AUDIO Switch
Switching between DVD and Audio
operation.
LIST Button
w
Changes the title list display.
Press for at least 2 seconds to switch
to title input screen.
1
2
3
u
i
a
s
SUB T. ON/OFF AUDIO
BAND Button
e
r
t
y
4
7
5
ANGLE
6
9
Radio Band switching
MUTE Button
o
;
8
OP/
Mute
DN
CLR
UP
+10
CL 0
CHG Button
Switches to CHANGE Mode.
V.SEL Button
V.SEL Switching
Note: Some controls may not be possible
depending on the audio device being used.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
71
Download from Www.Somanuals.com. All Manuals Search And Download.
R
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
Alp ine Ele c tronic s, Inc .
Tokyo office: 1-1-8 Nishi Gotanda,
Shinagawa-ku, Tokyo 141-8501, Japan
Tel.: (03) 3494-1101
Alp ine Ele c tronic s of Am e ric a , Inc .
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Tel.: 1-800-ALPINE-1 (1-800-257-4631)
Alp ine Ele c tronic s of Ca na d a , Inc .
Suite 203, 7300 Warden Ave. Markham,
Ontario L3R 9Z6, Canada
Tel.: 1-800-ALPINE-1 (1-800-257-4631)
Alp ine Ele c tronic s of Austra lia Pty. Ltd .
6-8 Fiveways Boulevarde Keysborough,
Victoria 3173, Australia
Tel.: (03) 9769-0000
Alp ine Ele c tronic s Gm b H
Kreuzerkamp 7-11 40878 Ratingen,
Germany
Tel.: 02102-45 50
Alp ine Ita lia S.p .A.
Via C. Colombo 8, 20090 Trezzano Sul
Naviglio MI, Italy
Tel.: 02-48 47 81
Alp ine Ele c tronic s Fra nc e S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue De La Belle Etoile, Z.I. Paris Nord II
B.P. 50016 F-95945, Roissy,
Charles de Gaulle Cedex, France
Tel.: 01-48 63 89 89
Alp ine Ele c tronic s of U. K., Ltd .
13 Tanners Drive, Blakelands,
Milton Keynes MK14 5BU, U.K.
Tel.: 01908-61 15 56
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal De Gamarra 36, Pabellón 32
01013 Vitoria (Alava) - Apdo. 133, Spain
Tel.: 34-45-283588
Designed by ALPINE Japan
Printed in Japan (S)
68P30540Y29-O
Sankei Kikaku Co., Ltd.
1-13-38, Hinodai,
Hino, Tokyo, Japan
Download from Www.Somanuals.com. All Manuals Search And Download.
|