FOR CAR USE ONLY/ NUR FÜR AUTOMOBIL GEBRAUCH/ POUR APPLICATION AUTOMOBILE UNIQUEMENT/
PARA USO EN AUTOMÓVILES/ SOLO PER L'UTILIZZO IN AUTOMOBILE/ ENDAST FÖR BILBRUK/
R
EN
DE
FR
ES
IT
TME-M770
6.5-INCH TOUCH PANEL WIDE LCD MONITOR
• OWNER'S MANUAL
Please read before using this equipment.
• BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung bitte vor
Gebrauch des Gerätes.
• MODE D'EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
• ISTRUZIONI PER L’USO
Si prega di leggere prima di utilizzare il
attrezzatura.
• ANVÄNDARHANDLEDNING
Innan du använder utrustningen bör du läsa
igenom denna användarhandledning.
•
ALPINE ELECTRONICS, INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku, Tokyo 141-0031, Japan
Phone 03-5496-8231
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
6-8 Fiveways Boulevarde Keysborough,
Victoria 3173, Australia
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris
Nord II, B.P. 50016, 95945, Roissy
Charles de Gaulle Cedex, France
Phone 01-48 63 89 89
SE
CH
Phone 03-9769-0000
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
ALPINE ELECTRONICS Gm b H
Frankfurter Ring 117, 80807 München,
Germany
ALPINE ITALIA S.p .A.
Viale C. Colombo 8,
20090 Trezzano Sul Naviglio (MI), Italy
Phone 02-48 47 81
Phone 1-800-ALPINE-1 (1-800-257-4631)
Phone 089-32 42 640
ALPINE ELECTRONICS OF CANADA, INC.
7300 Warden Ave., Suite 203, Markham,
Ontario L3R 9Z6, Canada
ALPINE ELECTRONICS OF U.K., LTD.
Fletchamstead Highway,
Coventry CV4 9TW. U.K.
Phone 0870-33 33 763
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava) - APDO 133, Spain
Phone 945-283588
Phone 1-800-ALPINE-1 (1-800-257-4631)
Qingdao Dongli Xinhaiyuan
Printing Co., Ltd.
Designed by ALPINE Japan
No.17, jiushuidong road,
Qingdao, China
Printed in China (S)
68-00493Z17-B
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Contents
Installation and Connections
Operating Instructions
Warning ........................................................... 11
Caution ............................................................ 11
Precautions ...................................................... 12
Installation ...................................................... 13
Connections .................................................... 16
WARNING
WARNING.................................................. 2
CAUTION ................................................... 3
PRECAUTIONS ......................................... 3
Basic Operation
Screen Display ON/OFF ....................................4
Adjusting the Volume.........................................4
Switching the Source .........................................4
Other Useful Features
Setup Operation .................................................5
VISUAL EQTM Operation ..................................7
Changing to Another Product’s Source..............8
Operating Other Products ..................................8
Information
In Case of Difficulty ........................................10
Specifications ...................................................10
1-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
WARNING
This symbol means important instructions.
Failure to heed them can result in serious
injury or death.
DO NOT WATCH VIDEO WHILE DRIVING.
Watching the video may distract the driver from looking
ahead of the vehicle and cause an accident.
INSTALL THE PRODUCT CORRECTLY SO THAT THE
DRIVER CANNOT WATCH TV/VIDEO UNLESS THE
VEHICLE IS STOPPED AND THE EMERGENCY BRAKE
IS APPLIED.
DO NOT OPERATE ANY FUNCTION THAT TAKES
YOUR ATTENTION AWAY FROM SAFELY DRIVING
YOUR VEHICLE.
It is dangerous for the driver to watch TV/Video while
driving a vehicle. Installing this product incorrectly
enables the driver to watch TV/Video while driving. This
may cause a distraction, preventing the driver from
looking ahead, thus causing an accident. The driver or
other people could be severely injured.
Any function that requires your prolonged attention
should only be performed after coming to a complete stop.
Always stop the vehicle in a safe location before
performing these functions. Failure to do so may result in
an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN
STILL HEAR OUTSIDE NOISE WHILE DRIVING.
Failure to do so may result in an accident.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking
ahead of the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in
fire, electric shock or other injury.
KEEP SMALL OBJECTS SUCH AS BATTERY OUT OF
THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If
swallowed, consult a physician immediately.
USE THE CORRECT AMPERE RATING WHEN
REPLACING FUSES.
Failure to do so may result in fire or electric shock.
2-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
CAUTION
Temperature
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
Be sure the temperature inside the vehicle is between
+45°C (+113°F) and 0°C (+32°F) before turning your unit
on.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Fuse Replacement
Failure to do so may cause personal injury or damage to
the product. Return it to your authorized Alpine dealer or
the nearest Alpine Service Centre for repairing.
When replacing the fuse(s), the replacement must be of
the same amperage as shown on the fuse holder. If the
fuse(s) blows more than once, carefully check all
electrical connections for shorted circuitry. Also have your
vehicle’s voltage regulator checked.
Maintenance
If you have problems, do not attempt to repair the unit
yourself. Return it to your Alpine dealer or the nearest
Alpine Service Station for servicing.
Installation Location
Make sure the TME-M770 will not be exposed to:
•
•
•
•
Direct sun and heat
High humidity
Excessive dust
Excessive vibrations
•
After turning the system off, a slight ghost of the image
will remain temporarily. This is an effect peculiar to
LCD technology and is normal.
•
Under cold temperature conditions, the screen may
lose contrast temporarily. After a short warm-up
period, it will return to normal.
About the Touch Switch
•
To protect the display, lightly touch the screen with the
tip of your finger.
•
If there is no response from the switch, then move your
finger away from the screen and touch again.
3-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Switching the Source
1
Touch the option part of the display to display
each source operation screen or source
selection screen.
2
If each source operation screen is displayed,
touch CONTROL on the upper right side of the
screen to display the source selection screen.
• The source selection screen is displayed by touching
“CONTROL” as described below, depending on the
current source.
When touched while the current source is GAME,
AUX 1 or AUX 2 : Source selection screen
When touched while the current source is EXT.DVD:
EXT.DVD operation screen → Source selection
screen
Main power lamp
POWER
Illumination sensor
(VOLUME UP)
(VOLUME DOWN)
When touched while the current source is TV: TV
operation screen → Source selection screen
When touched while the current source is LINK:
AUDIO operation screen → EXT.DVD operation
screen → TV operation screen → Source selection
screen
Screen Display ON/OFF
1
2
Press the POWER button.
To turn off the POWER, press the POWER
button again.
3
Touch the source (NAV. / AUX 1/ AUX 2) you
want to view.
•
If properly connected, the monitors main
POWER will turn off when the vehicle's
ignition switch is off. If the main power lamp
illuminates in the STAND BY mode, the
vehicle's battery may be discharged.
After turning the system off, a slight ghost of
the image will remain temporarily. This is an
effect peculiar to LCD technology and is
normal.
CONTROL
SOURCE
•
•
Under cold temperature conditions, the
screen may lose contrast temporarily. After a
short warm-up period, it will return to normal.
VISUAL
EQ
NAV.
AUX 1
AUX 2 SETUP
SOURCE
P 1/2
• The AUX 1, AUX 2 source name changes to the
selected mode name in the next item “SETUP
operation” - “6External input name setting”. Also,
“NAV.” is only displayed when “7 Navigation
Settings” in following section, “Setup Operation”, is
set to “ON”.
• The operation screens for the different sources as
well as the source selection screen turn off
automatically if no operation is performed for 5
seconds.
Adjusting the Volume
1
Adjust the volume level by pressing the
button.
or
4-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Features
1 Display mode selection for the display
Setup Operation
(DISPLAY MODE)
1
Touch the option part of the display to display
each source operation screen or source
selection screen.
Normal images are
expanded uniformly in
the horizontal direction
and are displayed over
2
If each source operation screen is displayed,
touch CONTROL on the upper right side of the
screen to display the source selection screen.
the entire screen.
WIDE
Normal images are
expanded in the
horizontal direction and
are displayed over the
entire screen. The
expansion ratio
3
4
Touch SETUP.
Select the desired setting item screen by
ZOOM
touching or
.
increases towards the
right and left edges of
the screen.
5
Change the setting by touching or
.
Normal images are
expanded in the
SETUP
DISPLAY MODE
DIMMER
WIDE
HIGH
horizontal and vertical
directions. The top and
bottom of the image are
cut off. This mode is
suited for 16:9 cinema
size images.
AUX OUT
LINK
SOUND OUT
MONITOR
CINEMA
RETURN
Normal image (4:3)
NORMAL
2 Dimmer adjustment (DIMMER)
HIGH : The backlighting is set to the value
adjusted at “DIMMER HIGH LEVEL”.
LOW : The backlighting is set to the value
adjusted at “DIMMER LOW LEVEL”.
AUTO: Display illumination can be adjusted
automatically depending on the
brightness in the car. (Within the
range of DIMMER HIGH LEVEL and
DIMMER LOW LEVEL)
Continued
5-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Features
3 Rear monitor select function (AUX OUT)
9 Dimmer LOW level adjustment (DIMMER
LOW LEVEL)
LINK : Output the video/audio portion
shown on the main monitor, to the
rear monitor.
Adjusts the LOW LEVEL (0 (MIN) to 15
(MAX)) of the dimmer.
AUX1 : Output the AUX1 video/audio to the
rear monitor.
p Touch panel adjustment (SCREEN
AUX2 : Output the AUX2 video/audio to the
rear monitor.
ALIGNMENT)
Adjust if the LCD display position and touch
panel position do not match.
4 Change sound output (SOUND OUT)
: Reset to default settings.
: Changes to adjustment screen. The
adjustment method is as follows.
1) Touch from SCREEN ALIGNMENT.
The screen changes to the adjustment
screen.
MONITOR
: Outputs sound through the
built-in speakers.
HEADPHONE : Outputs sound to
headphones if connected.
*Note that sound will not be output unless
the audio output settings are appropriate.
2) Touch the
mark on the lower left side
of the screen.
The adjustment screen switches.
5 External input sound level adjustment
(AUX IN 1 LEVEL/AUX IN 2 LEVEL)
3) Touch the
mark on the upper right side
HIGH: Sets the sound level at a high level.
LOW : Reduces the sound level.
of the screen.
When the adjustment is finished, the
screen returns to the SETUP screen.
6 External input name setting (AUX IN 1
MODE/AUX IN 2 MODE)
• If you touch RETURN on the adjustment screen,
nothing is adjusted and the screen returns to the
SETUP screen.
Select the name from the following list, to be
used for the product using the external input
mode. This will apply to the touch switch
name at source selection time and the
source name during playback change.
6
When the settings are completed, touch
RETURN.
The screen returns to the source selection
screen.
OFF/TV/EXT.DVD/GAME/AUX 1 (2)/LINK
(AUX 1 MODE only)
• Set to “LINK” when the IVA-D300 series or VPE-
S431 is connected. (Be sure to connect to the “AUX
IN 1” connector.)
• Set to “EXT.DVD” when the DVA-5210 , DVA-5205
series, DHA-S680 series or the like is connected.
• Set to “TV” if a TV tuner is connected to this
product.
• The way the source operation screens and the source
selection screen switches when “CONTROL” is
touched differs according to the selected mode. (See
page 4 “Switching the Source”, step 2.)
7 Navigation settings (NAV. IN)
When the navigation is connected, set to
ON.
8 Dimmer HIGH level adjustment (DIMMER
HIGH LEVEL)
Adjusts the HIGH LEVEL (16 (MIN) to 31
(MAX)) of the dimmer.
6-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
VISUAL EQTM Operation
4 Tint tone adjustment (TINT)
Tint tone can be adjusted from G15 (G MAX)
to R15 (R MAX).
*Adjustment cannot be made in the
NAVIGATION (RGB connection) mode.
1
Touch the option part of the display to display
each source operation screen or source
selection screen.
2
If each source operation screen is displayed,
touch CONTROL on the upper right side of the
screen to display the source selection screen.
5 Contrast adjustment (CONTRAST)
Contrast can be adjusted from –15 (LOW) to
+15 (HIGH).
3
4
5
Touch VISUAL EQ.
6 Screen quality adjustment (SHARP)
Screen quality can be adjusted from –15
(SOFT) to +15 (HARD).
Select the desired setting by touching or
.
Change the selected setting by touching or
.
7 Storing (USER MEMORY)
You can store the settings adjusted in steps
2 to 6 in the following way.
VISUAL EQ
1) Touch or from USER MEMORY after
adjusting settings 2 to 6, and select the
preset number you want to store in
(P.SET-1, 2).
2) After selecting the preset No., touch
“WRITE”.
VISUAL EQ MODE
OFF
RETURN
• P.SET-1, 2 stored here can be accessed from
“1 VISUAL EQ mode selection”.
• If 2 to 6 are adjusted, VISUAL EQ mode in 1
changes to “CUSTOM”.
1 VISUAL EQ mode (manufacturer’s settings)
selection (VISUAL EQ MODE)
OFF
: Default setting.
NIGHT M. : Suitable for movies with a lot of
dark scenes.
6
When setting is completed, touch RETURN.
The screen changes to the source selection
screen.
SOFT
: Suitable for movies with
computer graphics or
animation.
SHARP
: Suitable for old movies whose
resolution is unclear.
CONTRAST: Suitable for the latest movies.
P.SET-1, 2 : Accesses the preset number
stored in step “7 Storing”.
• To return to the default values after selecting one of
the modes between “NIGHT M.” and “CONTRAST”
then adjusting the image brightness, color density
and so on to suit your tastes, set this function to
“OFF”.
2 Brightness adjustment (BRIGHT)
Allows the brightness (–15 (MIN)~+15 (MAX))
of the picture.
3 Color depth adjustment (COLOR)
Change depth can be adjusted from –15
(MIN) to +15 (MAX).
*Adjustment cannot be made in the
NAVIGATION (RGB connection) mode.
7-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Features
<When the AUX IN 1 connection destination is VPE-
S431>
Changing to Another Product’s Source
After touching “SOURCE”, change the source
with the following operation.
1) Touch “P 1/2”.
The screen changes to “P 2/2”.
2) Touch “ ” “ ” “ ” “ ” to select the
desired source. Touch “ENTER”.
Touch “RETURN” to return to the previous
screen.
When used with touch panel compatible products
such as the IVA-D300 series/VPE-S431, sources
connected to those products are also selectable.
1
2
3
Touch the option part of the display to display
each source operation screen or source
selection screen.
If each source operation screen is displayed,
touch CONTROL on the upper right side of the
screen to display the source selection screen.
• When “SETUP” is selected, the setup operation on
the VPE-S431 can be performed in the same way as
the source selection operation. For details on the
setup items, see the VPE-S431’s operating
instructions.
Touch SOURCE.
CONTROL
SOURCE
Remote Control Sensor
VISUAL
EQ
NAV.
AUX 1
AUX 2 SETUP
SOURCE
P 1/2
<When the AUX IN 1 connection destination is the
IVA-D300 series etc.>
Each time you touch “SOURCE”, the source
changes.
The source depends on the settings and
connections of the product used together with
the IVA-D300 series.
Refer to the combined products instructions
manuals.
Remote sensor
• Receives the remote control signal from connected
ALPINE products such as navigation and DVD players.
Operating Other Products
When the TME-M770 is used in combination with a product designed to be operated from the TME-M770
(IVA-D300 series, DVA-5210, DHA-S680 series, etc.), some of the operations on the other product can be
performed from the TME-M770. Below are some examples of the operations that can be performed.
Operating a DVD in the IVA-D300 series
1
Touch any point on the display.
The “AUDIO” operation screen appears.
AUDIO
CONTROL
Change
pages
TOP
MENU
P 1/2
ENTER RETURN
P 2/2
MENU
1
2
3
4
5
6
7
8
9
p
q
w
e
8-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation of DVD in IVA-D300 series
Touch
Long touch
Play from start of current chapter
Play/pause
2x fast reverse/8x fast reverse after 5 seconds
1
2
–
2x fast forward/8x fast forward after 5 seconds
Slow play (from pause mode)
Play next chapter
3
PRE STOP/STOP
ł
STOP
–
–
–
–
–
–
–
4
5
6
7
8
9
p
q
w
e
–
–
Call out DVD menu
Switch page (function guide)
Move menu cursor
Enter (DVD menu)
–
–
Call out DVD top menu
Switch page (function guide)
–
Operating the DVA-5210 and the DHA-S680 series
1
2
Touch the option part of the display.
The screen changes to the operation screen for each source.
Touch “CONTROL” on the upper right side of the screen.
Display the “EXT.DVD” operation screen.
EXT.DVD
CONTROL
Change
pages
TOP
MENU
P 1/2
ENTER RETURN
P 2/2
MENU
1
2
3
4
5
6
7
8
9
p
q
w
e
Operation of a DVD player (DVA-5210)
Operation of a DVD changer (DHA-S680 series)
Touch
Long touch
Touch
Long touch
2x fast reverse/
8x fast reverse after 5 seconds
Play from start of current chapter
Play/pause
Play from start of current chapter
Play
16x fast reverse
Slow play
1
–
2
3
2x fast forward/
8x fast forward after 5 seconds
Slow play (from pause mode)
Play next chapter
Play next chapter
16x fast forward
PRE STOP/STOP
–
PRE STOP/STOP
Switch DISC
Switch DISC
STOP
–
–
–
–
–
4
5
6
7
8
9
p
–
Call out DVD menu
Switch page (function guide)
Move menu cursor
Enter (DVD menu)
Move back 1 screen
Call out DVD player setup screen*
Call out DVD menu
Switch page (function guide)
Move menu cursor
Enter (DVD menu)
Move back 1 screen
Call out DVD changer setup screen*
–
–
–
–
–
–
–
–
q
(DVD player setup)
*
(DVD changer setup)*
Cue to start of chapter, track or
elapsed time
Switch page (function guide)
Cue to start of chapter, track or
elapsed time
Switch page (function guide)
Call out DVD top menu
Call out DVD top menu
w
e
–
–
* Stop mode only
* Stop mode only
If a TV is operated (A TV tuner is connected)
1
2
Touch the option part of the display.
The screen changes to the operation screen for each source.
Touch “CONTROL” on the upper right side of the screen.
Display the “TV” operation screen.
TV
CONTROL
TV Operation
Touch
Long touch
Channel down
Channel up
Auto memory
Preset channel down
Preset channel up
Change band
–
–
–
–
–
–
1
2
3
4
5
6
A.MEMO
P.DN P.UP
BAND
Continued
1
2
3
4
5
6
9-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Features
• When connecting an IVA-D300 series to the TME-M770, be sure to connect it to the “AUX IN 1” connector and set the
“AUX IN MODE” setting (SETUP) to “LINK”.
• When connecting a DVA-5210, DHA-S680 series, etc., to the TME-M770, set the “AUX IN MODE” setting (SETUP) to
“EXT.DVD”.
• When connecting a TV tuner to the TME-M770, set the “AUX IN MODE” setting (SETUP) to “TV”.
• The TME-M770 and other components connected to it can be operated with a separately sold remote control unit. For
instructions on operations using the remote control unit, see the remote control unit’s operating instructions. When
operating an IVA-D300 series, see the “Rear Entertainment Function” section of the IVA-D300 series’s operating
instructions.
• Depending on the connected component, some functions and operations may differ. Also refer to the operating
instructions of the connected component.
Information
In Case of Difficulty
Navigation screen is not displayed or navigation
If you encounter a problem, please review the items in
the following checklist. This guide will help you isolate
the problem if the unit is at fault. Otherwise, make sure
the rest of your system is properly connected or consult
your authorized Alpine dealer.
system’s remote controller keys do not work.
• Navigation system’s power is turned off.
- Press the ON/OFF (POWER) button on the navigation
system’s remote controller to turn the navigation
system’s power on.
No function or display.
• Car's ignition is off.
- Turn the ignition on.
• No fuse or blown fuse.
- Check the cause and replace the fuse.
• Incorrect connections.
* The fluorescent tube replacement is not free of charge
even within the warranty period, for the tube is an article
of consumption.
- Check connection and remedy.
• Vehicle's battery is weak.
- Check the voltage of vehicle's battery.
Specifications
MONITOR
Unclear picture display.
• Fluorescent tube is exhausted.
- Replace the fluorescent tube*.
Screen Size
6.5-type
Display System
Low reflection rear
projection type TN liquid
crystal panel
Active matrix drive,
normally white display
No picture display.
• Brightness control is set for minimum brightness control.
- Adjust the brightness.
• Incorrect setting of the VTR mode.
- Switch to the correct mode.
• Protective circuit is on because of high temperature.
- Wait until the temperature inside the vehicle comes
down to the operating temperature range (45°C).
• Incorrect or open connection with the Monitor, AV
interface unit.
Drive System
Number of Picture Elements 280,800 pcs. (H:1200 x
V:234 dots)
Effective Number of Picture Elements 99.99% or more
Light Source
Internal optical system (U-
type cold cathode fluorescent
tube)
161 x 109 x 28.5mm
360g
Dimensions (W x H x D)
Weight
- Check the connection and remedy.
Picture color is poor.
• Brightness/Color/Tint control are not set to the proper
positions.
- Check each control.
AV Interface Unit
Dimensions (W x H x D)
Weight
180 x 119 x 28.5 mm
550g
Spots or dotted lines/stripes appear.
• Caused by neon signs, high-voltage power lines, CB
transmitter, other vehicle's ignition plugs, etc.
- Change the location of your vehicle.
• Due to continuous product improvement,
specifications and design are subject to change
without notice.
• The LCD panel is manufactured using an extremely
high precision manufacturing technology. Its effective
pixel ratio is over 99.99%. This means that there is a
possibility that 0.01% of the pixels could be either
always ON or OFF.
Unit does not operate.
• Monitor's power is not turned on.
- Turn on the monitor's power.
10-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
Before installing or connecting the unit, please
read the following and pages 2 and 3 of this
manual thoroughly for proper use.
DO NOT DAMAGE PIPE OR WIRING WHEN
DRILLING HOLES.
When drilling holes in the chassis for installation, take
precautions so as not to contact, damage or obstruct pipes,
fuel lines, tanks or electrical wiring. Failure to take such
precautions may result in fire.
Warning
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire
or product damage.
DO NOT INSTALL THE MONITOR NEAR THE
PASSENGER SEAT AIR BAG.
If the unit is not installed correctly the air bag may not
function correctly and when triggered the air bag may
cause the monitor to spring upwards causing an accident
and injuries.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE
GROUND.
(Check with your dealer if you are not sure.) Failure to do
so may result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM
THE NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due
to electrical shorts.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS.
The wiring and installation of this unit requires special
technical skill and experience. To ensure safety, always
contact the dealer where you purchased this product to
have the work done.
DO NOT ALLOW CABLES TO BECOME ENTANGLED
IN SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual
to prevent obstructions when driving. Cables or wiring
that obstruct or hang up on places such as the steering
wheel, shift lever, brake pedals, etc. can be extremely
hazardous.
USE SPECIFIED ACCESSORY PARTS AND INSTALL
THEM SECURELY.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying
capacity of the wire and result in fire or electric shock.
Be sure to use only the specified accessory parts. Use of
other than designated parts may damage this unit
internally or may not securely install the unit in place.
This may cause parts to become loose resulting in hazards
or product failure.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR
STEERING SYSTEMS TO MAKE GROUND
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
CONNECTIONS.
PINCHED BY A SHARP METAL EDGE.
Bolts or nuts used for the brake or steering systems (or
any other safety-related system), or tanks should NEVER
be used for installations or ground connections. Using
such parts could disable control of the vehicle and cause
fire etc.
Route the cables and wiring away from moving parts (like
the seat rails) or sharp or pointed edges. This will prevent
crimping and damage to the wiring. If wiring passes
through a hole in metal, use a rubber grommet to prevent
the wire’s insulation from being cut by the metal edge of
the hole.
KEEP SMALL OBJECTS SUCH AS BATTERY OUT OF
DO NOT INSTALL IN LOCATIONS WITH HIGH
THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If
swallowed, consult a physician immediately.
MOISTURE OR DUST.
Avoid installing the unit in locations with high incidence
of moisture or dust. Moisture or dust that penetrates into
this unit may result in product failure.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT
HINDER VEHICLE OPERATION, SUCH AS THE
STEERING WHEEL OR SHIFT LEVER.
Doing so may obstruct forward vision or hamper
movement etc. and results in serious accident.
11-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
Precautions
IMPORTANT
Please record the serial number of your unit in
the space provided below and keep it as a
permanent record. The serial number plate is
located on the rear of the monitor or on the
bottom of the AV interface unit.
•
•
•
Be sure to disconnect the cable from the (–) battery
post before installing your TME-M770. This will
reduce any chance of damage to the unit in case of a
short-circuit.
Be sure to connect the color coded leads according to
the diagram. Incorrect connections may cause the unit
to malfunction or damage the vehicle's electrical
system.
When making connections to the car’s electrical
system, be aware of the factory installed components
(e.g. on-board computer). Do not tap into these leads to
provide power for this unit. When connecting the
TME-M770 to the fuse box, make sure the fuse for the
intended circuit of the TME-M770 has the appropriate
amperage. Failure to do so may result in damage to the
unit and/or the vehicle. When in doubt, consult your
ALPINE dealer.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
•
The TME-M770 uses female RCA-type jacks for
connection to other units having RCA connectors. You
may need an adaptor to connect other units. If so,
please contact your authorized ALPINE dealer for
assistance.
12-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Installing AV Interface Unit
Attaching with screws
1. Place the unit on the location chosen for installa-
tion.
2. Mark the screw locations using the unit as a
template.
This Unit can be placed inside the trunk, on the
kick panel of the front passenger's seat or
underdash. However, to avoid unnecessary
signal wiring, it is better to mount the Unit as
close as possible to the Display.
3. Drill a hole less than 3 mm in diameter.
DO NOT MOUNT THE INTERFACE UNIT IN
LOCATIONS EXPOSED TO MOISTURE OR
EXTREME HEAT (such as the engine
compartment).
WARNING
When you are drilling a hole in the car body,
be careful not to damage pipes, tanks or
electrical wiring etc.. It might cause an acci-
dent or a fire.
Velcro fastener Mounting:
1. Place a Velcro fastener onto the mounting
surface. The rough side should be facing the unit.
2. Remove the backing to the adhesive on the
Velcro strips. Press the unit onto the mounting
location.
4. Firmly attach the unit using 4 of the supplied self-
tapping screws (M4 x 14).
Self-tapping screws (M4 x 14)
DISPLY OUT
I
PHONE OUT
I
AUX OUT
I
VIDEO
RGB IN
I
L
AUDIO
R
POWER SUPPLY
I
DISPLY OUT
I
AUX IN
2
I
VIDEO
L
PHONE OUT
I
AUDIO
R
TME-M770
AUX IN
1
AUX OUT
I
I
VIDEO
GB IN
VIDEO
TOUCH PANEL WIDE LCD MONITOR
L
AUDIO
R
L
AUDIO
R
POWER SUPPLY
I
AUX IN
2
I
VIDEO
L
AUDIO
R
TME-M0
AUX IN
1
I
VIDEO
TOUCH PANEL WIDE LCD MONITOR
L
AUDIO
R
Velcro fastener
(included)
13-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
Attaching the monitor and stand
3
Check the sticking position.
1Temporarily fasten the stand with gum tape.
2Loosen the adjustment screws, and adjust to a
safe, viewable position.
CAUTION
Do not install the monitor near the front
passenger seat air bag system.
The fixed arm tilts towards the
seat side.
Angle
adjustment
screw
<Mount it using the supplied bracket>
•
When mounting with other than the attached Mounting
Bracket, use the attached L shape bracket depending
on usage.
1
Remove the main unit attachment fitting.
Pull this part to release.
Seat side
Front glass side
Main unit
Line of sight
Main unit
attachment fitting
If the main unit
Dashboard
invades your line of
sight then it will
block your view.
2
Loosen the main unit attachment fitting with a coin
etc., slide it into the track on the rear of the main
unit and temporarily fasten it. Then fix it to the
stand.
In order to use safely, attach to the following
places.
• Stable and secure places.
• Places that will not have your view blocked by
the main unit when driving.
• Places that you will not hit against if you lean
forward while you wearing your seatbelt.
• Places where the main unit cannot hit against
the steering wheel while driving.
•
Be aware that if the surface of the dashboard is leather, wooden
panel, stretched fabric or any non-resin based product, then the
surface will be damaged when you remove the stand.
Do not place the main unit directly in front of the air conditioner
vents.
Slide in an upward
direction.
•
14-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Remove the main unit from the stand.
Remove the mount from the stand and stick it to
the dashboard etc..
Remove any dirt on the place to install, using the
supplied cloth.
Fixing screws
(M4 x 12 Supplied)
If the place of
attachment is
curved, then
bend this part
to match the
Mount
shape.
• If the temperature in the car is low (Winter), then first
heat up the place where you are going to stick the
mount with a hairdryer etc.
• Do not apply force to the mount, or expose to
humidity, within 24 hours after attaching.
• If the mount is not firmly stuck, then we recommend
that you attach with the supplied fixing screws.
6
Attach the main unit to the stand as shown in step
2.
Use the cable clamps to fix the cables.
• Before using, check that the main unit and the stand,
and the stand and the place where it is attached to
the car are fixed securely.
15-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
Connections
Make connections correctly.
Improper connections may cause a fire or operation failure.
Basic connection
e
u
i
r
y
p
9
w
t
1
q
2
3
4
5
7
6
8
o
;
a
s
d
f
16-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
• When connecting to an IVA-D300 series or VPE-
S431, use the “AUX IN 1” connector. When
connecting a rear view camera, use the “AUX IN 2”.
1 Parking brake lead (Yellow/Blue)
Connect this lead to the parking brake lead
powered when parking brake is pulled.
2 Monitor control lead (White/Pink)
Connect when upgrading with touch panel
compatible products such as the IVA-D300
series.
To prevent external noise from entering the
audio system.
• Locate the unit and route the leads at least
10 cm away from the car harness.
• Keep the battery power leads as far away from
other leads as possible.
• Connect the ground lead securely to a bare
metal spot (remove the coating if necessary)
of the car chassis.
• If you add an optional noise suppressor,
connect it as far away from the unit as
possible.Your Alpine dealer carries various
Alpine noise suppressors, contact them for
further information.
34Remote control output lead (White/Brown)
To remote control input lead of ALPINE products
used in the system.
5 Reverse Lead (Orange/White)
Use only when a back-up camera is connected.
Connect to the plus side of the car’s reverse
lamp that lights when the transmission is shifted
into reverse (R).
Switches the video picture to the back-up
camera. This is linked with putting the car into
reverse (R).
6 ACC power lead (Red)
To ACC power lead powered when engine key
position is ACC.
• Your Alpine dealer knows best about noise
prevention measures so consult your dealer for
further information.
7 Fuse (7.5A)
8 Ground lead (Black)
Connect the lead to a good chassis ground on
the vehicle. Make sure the connection is made to
bare metal and is securely fastened using the
sheet metal screw provided.
9 Brake Lamp
p Brake Connector (Included)
q Brake Signal Lead
w Brake Switch
e Headphone
r Main monitor
t Connection cable
y RGB cable
u To RGB output terminal
i Made by Alpine navigation
o Audio input connectors (AUX 1)
Use these connectors to input the audio signals
from a DVD player, video deck etc.
; Video input connector (AUX 1)
Use this connector to input the video signals
from a DVD player, video deck etc.
a Audio input connectors (AUX 2)
Use these connectors to input the audio signals
from a DVD player, video deck etc.
s Video input connectors (AUX 2)
Use this connector to input the video signals
from a DVD player, video deck etc.
d Audio output connectors
Use these connectors to output audio signals to
a rear monitor, etc.
f Video output connector
Use this connector to output video signals to a
rear monitor, etc.
17-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
System Connections
1) 2 main units + head unit (IVA-D300 series) + expansion box (VPE-S431) + navigation (NVE-
N099P, European customers only) + DVD changer (DHA-S680 series) + TV Tuner
Navigation
(NVE-N099P,
sold separately)
(European
To RGB
RGB cable
(supplied with NVE-N099P)
(European customers only)
output
terminal
customers only)
To RGB input
terminal
Head unit
(IVA-D300 series,
sold separately)
To Ai-NET input
connector
Ai-NET cable
To AV SELECTOR
terminal
To AUX OUT terminal
AV SELECTOR cable
(supplied with VPE-S431)
RCA
Extension
cable
To AUX IN 3 terminal
To head unit terminal
Ai-NET output connector (Black)
To audio output terminal
To AUX OUT 2 terminal
RCA Extension cable
RCA Extension cable
DVD changer
(DHA-S680 series,
sold separately)
Remote
RCA Extension cable
Remote control output
lead (AUX1)
control input
lead (AUX2)
To AUX IN 1
terminal
(supplied with DVD changer )
To video output terminal
Expansion box
(VPE-S431,
sold separately)
Monitor control 2 lead
To AUX IN 2 terminal
To audio output terminal
RCA Extension cable
To AUX IN 1 terminal
TV Tuner or VTR
(sold separately)
Rear monitor
(TME-M770)
B.BOX
RCA Extension cable
To video output terminal
To AUX
Remote control output
OUT 1
Remote control input lead
lead (AUX1)
terminal
White/Brown
White/Brown
Monitor
cable
Rear monitor
(TME-M770)
Remote control output
lead (AUX 2)
Remote control input lead
White/Brown
RCA
White/Brown
Extension
Remote
control
input lead
(AUX 1)
cable
Monitor
control 1
lead
Remote
control
output lead
(AUX 1)
To AUX IN 1 terminal
Main unit B.BOX
(TME-M770)
Monitor
cable
Main unit monitor
(TME-M770)
18-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2) Main unit + navigation (NVE-N099P, European customers only) + DVD player (such as
DVA-5210)
Navigation
(NVE-N099P,
To RGB
RGB cable
(supplied with NVE-N099P)
(European customers only)
sold separately)
(European
output
terminal
customers only)
To RGB input
terminal
To audio output terminal
RCA Extension cable
DVD player
Main unit B.BOX
(TME-M770)
(such as DVA-5210,
sold separately)
RCA Extension cable
(supplied with DVD player)
To AUX IN 1
terminal
To video output terminal
Monitor
cable
Main unit monitor
(TME-M770)
Remote control output
lead (AUX1)
Remote control input lead
White/Brown
White/Brown
3) Main unit and head unit (IVA-D300 series)
Head unit
(IVA-D300 series,
sold separately)
To AUX
OUT
terminal
Remote
control
input lead
RCA
Extension
cable
Monitor
control lead
Remote
control
output lead
(AUX1)
To AUX IN 1 terminal
Main unit B.BOX
(TME-M770)
Monitor
cable
Main unit monitor
(TME-M770)
19-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
R
Car Audio and Navigation Systems
GERÄTE-PASS
AUDIO SYSTEME
Fahrzeugmarke:
Typ:
Amtl. Kennzeichen:
Name des Halters:
Straße:
Wohnort:
Bitte füllen Sie diesen Pass vollständig aus und bewahren Sie ihn
außerhalb des Fahrzeugs auf:
Im Falle eines Diebstahls wird für Sie die Schadensabwicklung mit der
Versicherung einfacher, und Sie erleichtern der Polizei die Fahndung
nach den Tätern.
Download from Www.Somanuals.com. All Manuals Search And Download.
Händlerstemple
Tipps der Polizei:
[ Stellen Sie Ihr Fahrzeug stets gut sichtbar ab.
[
Verschließen Sie Türen, Fenster, Schiebedach und Kofferraum immer, auch bei nur kurzer Abwesenheit.
[ Lassen Sie keine Wertsachen sichtbar im Auto liegen.
[ Wird Ihr Fahrzeug aufgebrochen, wenden Sie sich sofort an die nächste Polizeidienststelle.
[ Belassen Sie Ihr Fahrzeug nach einem Aufbruch im Originalzustand.
[ Informieren Sie sich über technische Sicherungsmöglichkeiten bei einer kriminalpolizeilichen
Beratungsstelle.
Gerät 1
Modell-Nr.:
Hersteller:
Seriennummer:
A
L
Kaufdatum:
Preis:
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Product Information
Card
Produkt-
Informationskarte
Q8. Purpose of buying this
Q8. Zweck des Kaufs dieses
English
Filling in this Product
unit?
1. Addition
2. Replacement
Deutsch
Das Ausfüllen dieser
Geräts?
1. Zusätzlich
2. Austausch
Information Card is voluntary. If
you fill in this card and send it to
Alpine, your data will be
tabulated into reference data for
future Alpine product
development. In addition, in the
future you may receive
information about new products
or Survey Mail requesting
additional opinions about Alpine
products or services. If you
agree to the above term, please
sign your name in the indicated
space and return the card. Any
additional comments or inquiries
may be sent to : Person in charge
of Customer Service department
Alpine Electronics (Europe)
GmbH.
Produktinformations-Karte ist
freiwillig. Sollten Sie diese Karte
vervollständigen, so werden die Daten
für zukünftige Produktentwicklungen
von Alpine als Referenzdaten
herangezogen. Ebenso können Sie in
der Zukunft Informationen über neue
Alpine Produkte erhalten oder uns
auch Ihre Meinung über Alpine
Produkte und Dienstleistungen im
Rahmen von Kunden-Befragungen
mitteilen. Stimmen Sie dem Kontakt
durch Alpine zu, so würden wir Sie
bitten, in dem dafür vorgesehenen Feld
zu unterschreiben und die Karte
kostenfrei an uns zurückzuschicken.
Zusätzliche Kommentare und
Meinungen können Sie gerne an den
zuständigen Kontakt im Kundendienst
Alpine Electronics (Europe) GmbH
senden.
↓
↓
•
Previous brand replaced?
•
Marke des ausgetauschten
Geräts?
1. Factory installed
2. Alpine
3. Other → (Brand
1. Serienmäßige Ausstattung
2. Alpine
3. Anderer Hersteller →
Name)
(Herstellername)
Q9. Have you purchased
Q9. War dies das erste Mal,
Alpine products before?
1. First time
2. Two or More times
Q10.When you purchased this
dass Sie ein Alpine-Gerät
gekauft haben?
1. Erstes Mal
2. Zweites Mal oder öfter
Q10.Haben Sie dieses Alpine-
Alpine unit, did you
compare it with other
Gerät vor dem Kauf mit
Geräten anderer Hersteller
verglichen?
brand?
1. Yes → (Brand
Name)
2. No.
Q11.GENDER
1. Male
2. Female
Q12.AGE
Q13.MARITAL STATUS
1. Single
1. Ja →
(Herstellername)
2. Nein
Q11.Geschlecht
1. Männlich
2. Weiblich
Q12.Alter
Q13.Familienstand
1. Ledig
2. Verheiratet
Q14.Beruf
1. Selbständige/Firmeninhaber/
freiberuflich Tätige
2. Leitende Angestellte
3. Sonstige Angestellte
4. Beamte
5. Schulbildung
6. Studium
7. Sonstige
Frankfurter Ring 117, 80807
München, Germany
Phone: +49-(0)89-32 42 640
Frankfurter Ring 117, 80807
München, Germany
Phone: 089-32 42 640
2. Married
Q14.OCCUPATION
1. Company Owner/Self-
employed/Freelance
2. Manager
3. Company Employee
4. Civil Servant
5. Educator
6. Student
7. Other
Q15.Comments
Q1. PRODUCT PURCHASED
1. Cassette Player
2. CD Player
3. MD Player
4. DVD Player
5. CD Changer
6. Amplifier
7. Speaker
8. Subwoofer
9. Monitor Controller
10. Video Monitor
11. Navigation
12. Processor/Equalizer
13. CD/Video CD Changer
14. Other
Q1. gekauftes Gerät
1. Kassetten-Spieler
2. CD-Spieler
3. MD-Spieler
4. DVD-Spieler
5. CD-Wechsler
6. Verstärker
7. Lautsprecher
8. Subwoofer
9. Monitor-Controller
10. Video-Monitor
11. Navigationssystem
12. Prozessor/Equalizer
13. CD/Video-CD-Wechsler
14. andere
Q15.Kommentar:
Q2. MODEL
NUMBER:
Q2. Modellnummer:
Q3. DATE OF PURCHASE:
Q3. Kaufdatum:
Monat:
Month:
Jahr:
Year:
Q4. If navigation system, which
Q4. Falls Navigationssystem:
monitor?
1. Alpine → (Model
No.)
Welcher Monitor?
1. Alpine →
(Modellnr.)
2. Other → (Brand
Name)
2. Anderer Hersteller →
(Herstellername)
Q5. Art des Geschäfts, in dem
Q5. STORE TYPE WHERE
PURCHASED:
1. Car Audio Specialist
2. Audio/Video Store
3. Electronics/Appliance Store
4. Car Accessories Shop
5. Other
Sie das Gerät gekauft
haben:
1. Spezialist für Auto-
Audioanlagen
2. Audio/Video-Geschäft
3. Elektro-Geschäft
4. Autozubehör-Geschäft
5. Anderer
Q6. Type of vehicle in which
this unit is installed:
Make:
Hersteller
Q6. Art des Fahrzeugs, in das
Model:
Purchased
Year:
Model
das Gerät installiert wurde:
Marke:
Modell:
Year:
Q7. How was this vehicle
gekauft im
Jahr:
Baujahr:
purchased?
1. Purchase
2. Lease
Q7. Wie haben Sie das
Fahrzeug gekauft?
1. Kauf
2. Leasing
Download from Www.Somanuals.com. All Manuals Search And Download.
Carte d’informations
Tarjeta de información
sur le produit
del producto
Q8. Pourquoi avez-vous acheté cet
appareil?
1. Addition
Q8. ¿Propósito de comprar
Français
Español
esta unidad?
1. Mejora del sistema
2. Sustitución
En remplissant volontairement
cette fiche, et en l’envoyant à
Alpine, vous acceptez que ces
informations soient utilisées par
Alpine, dans le cadre de
El envío de la información
solicitada es voluntario. Si Vd.
nos la remite, será utilizada de
modo confidencial para el
desarrollo de futuros productos
Alpine. Si Vd. desea recibir
información sobre nuevos
productos de nuestra gama,
indique su nombre en el espacio
designado y remítanos la tarjeta.
Cualquier solicitud adicional
puede ser enviada a : Persona
responsable del Servicio de
Atención al Cliente de Alpine
Electronics (Europe) GmbH.
Frankfurter Ring 117, 80807
2. Remplacement
↓
↓
•
Marque précédente
remplacée?
•
¿Sustitución de marca anterior?
1. Instalado en la fábrica
2. Alpine
1. Installée en usine
2. Alpine
3. Autre →
(Marque)
Q9. Aviez-vous déjà acheté
des produits Alpine?
1. Première fois
2. Deux fois ou plus
Q10.Lorsque vous avez acheté
ce produit Alpine, l’avez-
vous comparé à une autre
marque?
1. Oui → (Marque)
2. Non
Q11.SEXE
1. Masculin
2. Féminin
Q12.AGE
Q13.SITUATION DE FAMILLE
1. Célibataire
2. Marié
Q14.PROFESSION
1. Entrepreneur/Travailleur
indépendant/Free-lance
2. Directeur
3. Employé de bureau
4. Fonctionnaire
5. Educateur
6. Etudiant
7. Autre
Q15.Commentaires
3. Otros
marca)
→
(Nombre de
développement de nouveaux
produits. Par ailleurs, vous
autorisez Alpine à solliciter
votre opinion par mailing sur de
nouveaux produits ou services.
Si vous acceptez les termes ci-
dessus, veuillez signer cette
carte à l’endroit indiqué, et nous
la retourner. Tout autre
commentaire ou demande doit
être adressé à l’attention de:
Responsable du service
consommateur Alpine
Electronics (Europe) GmbH.
Frankfurter Ring 117, 80807
Q9. ¿Ha comprado Vd.
productos Alpine
anteriormente?
1. Primera vez
2. Dos o más veces
Q10.Cuando usted compró esta
unidad Alpine, ¿la
comparó con otros
fabricantes?
1. Si → (Nombre de
marca)
2. No
München, Germany
Phone: +49-(0)89-32 42 640
Q11.SEXO
1. Masculino
2. Femenino
Q12.Edad
Q13.Estado civil
1. Soltero
München, Germany
Phone: +49-(0)89-32 42 640
Q1. Producto Comprado
1. Radio/Cassette
2. Radio/CD
3. Reproductor de MD
4. Reproductor de DVD
5. Cambiador de CD
6. Amplificador
2. Casado
Q1. PRODUIT ACHETE
1. Lecteur de cassette
2. Lecteur de CD
3. Lecteur MD
4. Lecteur DVD
5. Changeur de CD
6. Amplificateur
7. Haut-parleur
8. Haut-parleur de graves
9. Station Multimedia
10. Moniteur Vidéo
11. Navigation
12. Processeur/Egaliseur
13. Changeur de CD/CD Vidéo
14. Autre
Q14.Ocupación
1. Propietario de empresa/
Autónomo/Profesional
independiente
2. Gerente
7. Altavoz
8. Subwoofer
3. Empleado de compañia
4. Empleado público
5. Profesor
6. Estudiante
7. Otros
9. Monitor de control
10. Monitor de video
11. Sistema de navegación
12. Procesador/Ecualizador
13. Cambiador de CD/Video CD
14. Otros
Q15.Comentarios
Q2. Número de
modelo:
Q2. NUMERO DU
Q3. Fecha de compra:
MODELE:
Mes:
Año:
Q3. DATE D’ACHAT:
Mois:
Année:
Q4. En caso de sistema de
navegación, ¿qué
Q4. Si c’est un système de
monitor?
1. Alpine → (N° de
modelo)
navigation, quel moniteur?
1. Alpine → (N° du
modèle)
2. Autre →
(Marque)
2. Otros
marca)
→
(Nombre de
Q5. TIPO DE TIENDA DONDE
Q5. TYPE DE MAGASIN OU
COMPRÓ:
1. Especialista en audio de
automóviles
2. Tienda de audio/video
3. Tienda de electrónica/
electrodomésticos
4. Tienda de accesorios
automovilísticos
VOUS AVEZ ACHETE LE
PRODUIT:
1. Spécialiste autoradio
2. Magasin audio/vidéo
3. Magasin d’électronique/
appareils
4. Magasin d’accessoires
automobiles
5. Otros
Q6. Tipo de vehiculo en que la
5. Autre
Q6. Type de véhicule dans
unidad está instalada:
Marca:
Modelo:
lequel cet appareil est
installé:
Marque:
Modèle:
Année
d’achat:
modèle:
Año de
compra:
modelo:
Año del
Année du
Q7. ¿Cómo fue comprado este
vehiculo?
1. compra
Q7. Comment avez-vous
acheté ce véhicule?
1. Achat
2. Leasing
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Location-bail
Scheda informazioni
prodotto
Q8. Scopo acquisto
1. Aggiunta
2. Sostituzione
Italiano
La compilazione di questa formulario è
volontaria. Se compilate questo
formulario, ritornandolo ad Alpine, i
Vostri dati saranno raccolti in un file di
riferimento per lo sviluppo dei nuovi
prodotti Alpine. In aggiunta Voi
potrete ricevere in futuro informazioni
riguardanti i nuovi prodotti o la
richiesta di una Vostra opinione circa i
prodotti o i servizi forniti da Alpine. Se
siete d’accordo, Vi preghiamo di
ritornarci il formulario completato
negli appositi spazi con i Vostri dati. In
caso desideriate fornire altri commenti
o richiedere informazioni aggiuntive,
potete indirizzare il tutto a :
↓
•
Marca sostituita
1. Installato di fabbrica
2. Alpine
3. Altro → (Nome
marca)
Q9. Avevate già acquistato
prodotti Alpine?
1. No
2. Due o tre volte
Q10.Nell’acquistarlo, avete
paragonato questo
prodotto ad un’altra
marca?
1. Si → (Nome
marca)
2. No
Responsabile dipartimento Servizio
Clienti Alpine Electronics (Europe)
GmbH.
Frankfurter Ring 117, 80807 München,
Germany
Q11.SESSO
1. Maschile
2. Femminile
Q12.ETÀ
Q13.STATO CIVILE
1. Celibe/nubile
Phone: +49-(0)89-32 42 640
2. Coniugato/coniugata
Q14.LAVORO
1. Proprietario di azienda/
artigiano/libero professionista
2. Manager
3. Impiegato
4. Impiegato statale
5. Insegnante
6. Studente
7. Altro
Q15.Commenti
Q1. PRODOTTO
ACQUISTATO
1. Lettore di cassette
2. Lettore CD
3. Lettore MD
4. Lettore DVD
5. CD Changer
6. Amplificatore
7. Altoparlante
8. Subwoofer
9. Radio Monitor
10. Monitor video
11. Sistema di navigazione
12. Processore/equalizzatore
13. Cambia CD/Video CD
14. Altro
Q2. NUMERO
MODELLO:
Q3. DATA DI ACQUISTO:
Mese:
Anno:
Q4. In caso di acquisto di un
sistema di navigazione,
quale monitor possiede?
1. Alpine → (No.
Modello)
2. Altro → Nome
marca
Q5. NEGOZIO DI ACQUISTO:
1. Specialista Car Stereo
2. Negozio di audio/video
3. Negozio di elettronica/
elettrodomestici
4. Negozio accessori automobile
5. Altro
Q6. Tipo di veicolo posseduto:
Marca:
Modello:
Anno
Anno
acquisto:
modello:
Q7. Modalità acquisto
1. Acquisto
2. Leasing
Download from Www.Somanuals.com. All Manuals Search And Download.
I agree to the above stated terms of the Alpine Product Information Card.
Ich stimme dem Kontakt durch Alpine für Informations- und Befragungszwecke zu.
J’accepte les termes de cette carte d’information produit Alpine.
Estoy conforme con los términos de la tarjeta de información sobre producto de Alpine.
Accetto i termini della scheda informazioni prodotti Alpine.
(Date/Datum/Date/Fecha/Data)
(Signature/Unterschrift/Signature/Firma)
Name/Nom/Nombre/Nome
(First Name/Vorname/Prénom/Primer nomble/Nome)
(Surname/Familienname/Nom de famille/Apellido/Cognome)
Home Address/Privatanschrift/Adresse/Dirección/Indirizzo
(Street/Straße/Rue/Calle/Via) (Post Code/Postleitzahl/Code postal/Código postal/Codice postale)
(Town/City/Stadt/Ville/Ciudad/Città) (Country/Land/Pays/País/Paese)
Telephone Number:
E-Mail/Correo electrónico:
NO.
Q1Other
Q2
Q6
Month
Year
NO.1. Model No.
Q3
Q4
NO.2. Brand Name
Make:
Purchased Year:
Model:
NO.
Q5Other
ModelYear:
NO.
1
Previous brand replaced.
1. 2. 3.
Brand Name
Q7
Q8
2
NO.
NO.
1
2
Brand Name
Q9
Q10
Q11
NO.
NO.
NO.
Other
NO.
Q12
Q13
Q14
years old
Comments
Q15
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|