R
EN
DE
FR
ES
IT
CDA-7865R
FM/ MW/ LW/ RDS CD Receiver
• OWNER'S MANUAL
Please read before using this equipment.
• BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung bitte vor
Gebrauch des Gerätes.
• MODE D'EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
• ISTRUZIONI PER L’USO
Si prega di leggere prima di utilizzare il
attrezzatura.
• ANVÄNDARHANDLEDNING
Innan du använder utrustningen bör du läsa
igenom denna användarhandledning.
ALPINE ELECTRONICS, INC.
Tokyo office: 1-1-8 Nishi Gotanda,
Shinagawa-ku,
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue De La Belle Etoile, Z.I. Paris Nord Il
B.P. 50016 F-95945, Roissy, Charles De Gaulle
Cedex, France
6-8 Fiveways Boulevarde Keysborough,
Victoria 3173, Australia
Tokyo 141-8501, Japan
Tel.: (03) 3494-1101
Tel.: (03) 9769-0000
ALPINE ELECTRONICS Gm b H
Kreuzerkamp 7-11 40878 Ratingen, Germany
Tel.: 02102-45 50
Tel.: 01-48 63 89 89
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
SE
ALPINE ELECTRONICS OF U.K., LTD.
13 Tanners Drive, Blakelands, Milton Keynes
MK14 5BU, U.K.
ALPINE ITALIA S.p .A.
Via C. Colombo 8, 20090 Trezzano Sul Naviglio
MI, Italy
Tel.: 1-800-ALPINE-1 (1-800-257-4631)
Tel.: 01908-61 15 56
ALPINE ELECTRONICS OF CANADA, INC.
Suite 203, 7300 Warden Ave. Markham,
Ontario L3R 9Z6, Canada
Tel.: 02-48 47 81
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal De Gamarra 36, Pabellón 32
01013 Vitoria (Alava)-Apdo. 133, Spain
Tel.: 34-45-283588
Tel.: 1-800-ALPINE-1 (1-800-257-4631)
Designed by ALPINE Japan
Printed in China (Y)
68P01149K85-A
Meiyi Printing Factory, Dalian, China
No. 28 Chang Qing Street, Xi Gang District, Dalian, China
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Conte nts
RDS Operation
Op e ra ting Instruc tions
Setting RDS Reception Mode and Receiving
RDS Stations ................................................12
Recalling Preset RDS Stations.........................12
Receiving RDS Regional (Local) Stations.......13
Receiving Traffic Information..........................13
PTY (Programme Type) Tuning ......................13
Receiving Traffic Information While Playing
CD or Radio..................................................14
Priority PTY (Programme Type)......................14
Turning Emergency Alarm On or Off ..............15
Displaying Radio Text .....................................15
WARNING
WARNING .................................................. 2
CAUTION ................................................... 2
PRECAUTION............................................ 2
Basic Operation
Detaching the Front Panel..................................4
Attaching the Front Panel ..................................4
Initial System Start-Up ......................................4
Turning Power On and Off.................................4
Display Angle Adjustment .................................5
Adjusting Volume/Bass/Treble/Balance
CD Player Operation
Opening and Closing the Movable display ......16
Playback ...........................................................16
Music Sensor (Skip).........................................17
Fast Forward and Backward ............................17
Repeat Play ......................................................17
M.I.X. (Random Play) .....................................17
Scanning Programmes .....................................17
Displaying the Title/Text..................................18
Titling Discs .....................................................18
Erasing Disc Title.............................................19
Controlling CD Changer (Optional) ................19
Searching for Titled Discs
(Between Left and Right)/Fader (Between
Front and Rear)...............................................5
Turning Loudness On/Off ..................................5
Selecting BBE Mode .........................................5
Adjusting Source Signal Level ..........................6
Changing Backlighting Colour ..........................6
Dimmer Control .................................................6
Subwoofer On and Off .......................................7
Sound (Beep) Guide Function ...........................7
Turning Mute Mode On/Off...............................7
CD Text Scroll Setting .......................................7
Setting the AUX Mode.......................................8
Demonstration....................................................8
Adjusting the built-in Audio Processor ..............9
Switching the Display Modes ............................9
(CD Changer only) .......................................20
Multi-Changer Selection ..................................20
Remote Control Operation
Controls on Remote Control ............................21
Battery Replacement ........................................22
Radio Operation
Information
Manual Tuning .................................................10
Automatic Seek Tuning ...................................10
Manual Storing of Station Presets ...................11
Automatic Memory of Station Presets .............11
Tuning to Preset Stations .................................11
Auto Station Search While Travelling .............11
In Case of Difficulty ........................................23
Specifications ...................................................25
Insta lla tion a nd Conne c tions
Precautions .......................................................26
Installation .......................................................27
Connection .......................................................28
1
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
WARNING
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
This symbol means important instructions.
Failure to heed them can result in serious
injury or death.
DO NOT OPERATE ANY FUNCTION THAT TAKES
YOUR ATTENTION AWAY FROM SAFELY DRIVING
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to
the product. Return it to your authorized Alpine dealer or
the nearest Alpine Service Centre for repairing.
YOUR VEHICLE.
Any function that requires your prolonged attention
should only be performed after coming to a complete stop.
Always stop the vehicle in a safe location before
performing these functions. Failure to do so may result in
an accident.
DO NOT PLACE HANDS, FINGERS OR FOREIGN
OBJECTS IN INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the
product.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN
STILL HEAR OUTSIDE NOISE WHILE DRIVING.
Failure to do so may result in an accident.
PRECAUTIONS
Temperature
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking
ahead of the vehicle and cause an accident.
Be sure the temperature inside the vehicle is between
+60°C (+140°F) and –10°C (+14°F) before turning your
unit on.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
Moisture Condensation
You may notice the CD playback sound wavering due to
condensation. If this happens, remove the disc from the
player and wait about an hour for the moisture to
evaporate.
USE THIS PRODUCT FOR MOBILE 12V
APPLICATIONS.
Use for other than its designed application may result in
fire, electric shock or other injury.
Damaged Disc
Do not attempt to play cracked, warped, or damaged
discs. Playing a bad disc could severely damage the
playback mechanism.
KEEP SMALL OBJECTS SUCH AS BATTERY OUT OF
THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If
swallowed, consult a physician immediately.
Maintenance
If you have problems, do not attempt to repair the unit
yourself. Return it to your Alpine dealer or the nearest
Alpine Service Station for servicing.
USE THE CORRECT AMPERE RATING WHEN
REPLACING FUSES.
Failure to do so may result in fire or electric shock.
DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.
Doing so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result
in fire.
2
-E N
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Location
Never Attempt the Following
Make sure the CDA-7865R will not be installed in a
location subjected to:
Do not grip or pull out the disc while it is being pulled
back into the player by the automatic reloading
mechanism.
Do not attempt to insert a disc into the unit when the unit
power is off.
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
Handling the Detachable Front Panel
•
•
Do not expose to rain or water.
Do not drop or apply shock.
Correct Handling
Inserting Discs
Do not drop the disc while handling. Hold the disc so you
will not leave fingerprints on the surface. Do not affix
tape, paper, or gummed labels to the disc. Do not write on
the disc.
Your player accepts only one disc at a time for playback.
Do not attempt to load more than one disc.
Make sure the label side is facing up when you insert the
disc. Your player will automatically eject any disc that is
inserted incorrectly. If the player continues to eject a
correctly inserted disc, push the RESET switch with a
pointed object such as a ball-point pen.
CORRECT
Playing a disc while driving on a very bumpy road may
result in skips, but this will not scratch the disc or damage
the player.
INCORRECT
CORRECT
New Discs
As a protective measure to prevent the CD from jamming,
the CD player will automatically eject discs with irregular
surfaces or inserted incorrectly. When a new disc is
inserted into the player and ejected after initial loading,
using your finger, feel around the inside of the centre hole
and outside edge of the disc. If you feel any small bumps
or irregularities, this could inhibit proper loading of the
disc. To remove the bumps, rub the inside edge of the hole
and outside edge of the disc with a ball-point pen or other
such instrument, then insert the disc again.
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could
cause the CD player to skip. For routine cleaning, wipe
the playing surface with a clean, soft cloth from the centre
of the disc to the outer edge. If the surface is heavily
soiled, dampen a clean, soft cloth in a solution of mild
neutral detergent before cleaning the disc.
Centre
Hole
Centre
Hole
New
Disc
Bumps
Outside
(Bumps)
Disc Accessories
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and
never use any special shape discs.
Use of special shape discs may cause damage to the
mechanism.
There are various accessories available on the market for
protecting the disc surface and improving sound quality.
However, most of them will influence the thickness and/or
diameter of the disc. Using such accessories can cause the
disc to be out of standard specifications and may create
operational problems. We recommend not using these
accessories on discs played in Alpine CD players.
Transparent Sheet
Disc Stabilizer
3
-E N
Download from Www.Somanuals.com. All Manuals Search And Download.
Ba sic Op e ra tion
PWR
BBE
8
RESET
MODE
c
9
Detaching the Front Panel
Connectable to Remote Control Interface Box
You can operate this unit from the vehicle's control
unit when an Alpine Remote Control Interface Box
(optional) is connected. For details, contact your
Alpine dealer.
1
2
3
Press the PWR (Power) button at least 3
seconds to turn off the power.
Press the
(Release) button at lower left
corner until the front panel pops out.
Grasp the left side of the front panel and pull it
out.
Initial System Start-Up
Immediately after installing or applying power to the
unit, it should be initialized. Press the RESET switch
with a ballpoint pen or any other pointed object.
NOTES
• The front panel may become hot in normal usage
(especially the connector terminals), this is not
malfunction.
• To protect the front panel, place it in the supplied
carrying case.
Turning Power On and Off
1
Press the PWR (Power) button to turn on the
unit.
NOTE
The unit can be turned on by pressing any other button
except the eject c button.
Attaching the Front Panel
The volume level gradually increases to the previous
level you were listening to before the unit was turned
off. Press the PWR button for at least 3 seconds to
turn off the unit.
1
First, insert the right side of the front panel into
the main unit. Align the groove on the front panel
with the projections on the main unit.
NOTE
2
Push the left side of the front panel until it locks
firmly into the main unit.
The very first time the power is turned on, the volume
will start from level 12, the BBE will be on in the tuner
mode.
2
1
1
NOTE
Before attaching the front panel, make sure that there is
no dirt or dust on the connector terminals and no foreign
object between the front panel and the main unit.
4
-E N
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Angle Adjustment
Turning Loudness On/Off
Movable display
Loudness introduces a special low- and high-
frequency emphasis at low listening levels. This
compensates for the ear's decreased sensitivity to
bass and treble sound.
1
Press and hold the MODE (Audio Control) knob
for at least 2 seconds to activate or deactivate
the loudness mode.
The movable display may be adjusted to 3
different angles depending upon user preference.
The display shows "LOUDNESS" when the
loudness mode is activated.
1
Press the ANGLE 8 or 9 button to adjust the
angle of the movable display.
NOTE
When an external audio processor is connected to this
unit, the Loudness function on this unit does not work.
NOTES
• The display will close a half minute after the ignition
key is turned to the OFF position.
• The adjusted angle of the display is stored in memory.
There is no need to re-adjust the angle when the power
is turned back on.
Selecting BBE Mode
The BBE (Barcus Berry Electronics) processor
installed in this unit is designed to correct the
phase distortion inherent in most loudspeaker
designs. Ensuring the phase integrity of the signal
driving the speakers improves the accurate
reproduction of the sound.
CAUTION
Keep hands (or any other object) away from the display
while it is opening or closing to avoid damage or injury.
The back of the movable display will get very warm
under normal operating conditions. This is not a
malfunction. Do not touch.
Adjusting Volume/Bass/Treble/
Balance (Between Left and Right)/
Fader (Between Front and Rear)
1
2
Press and hold the BBE button for at least 2
seconds to turn on and off the BBE mode.
In BBE mode, press the MODE (Audio Control)
knob to select the BBE adjusting mode.
Each press changes the adjusting mode.
1
Press the MODE (Audio Control) knob
repeatedly to choose the desired mode.
Each press changes the modes as follows:
3
To change to a desired BBE level, rotate the
MODE (Audio Control) knob.
The BBE level can be changed from +1 to +3.
→ VOL
→ BAS
→TRE
FAD ←
BAL ←
NOTE
NOTES
The initial mode is +2.
• If the MODE (Audio Control) knob is not rotated in 5
seconds after selecting the BASS, TREBLE,
BALANCE, or FADER mode, the unit automatically
returns to the VOLUME mode.
• When the subwoofer or BBE mode is ON, their
respective levels may be adjusted.
2
Rotate the MODE (Audio Control) knob until the
desired sound is obtained in each mode.
NOTES
• The settings of the Bass and Treble will be individually
memorized for each source (FM, MW (LW) and CD)
until the setting is changed. Depending on the
connected devices, some functions and display
indications do not work.
• When the temperature inside the unit rises, the volume
may decrease momentarily. This is not a malfunction.
5-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Ba sic Op e ra tion
MODE
INTLZ
TUNE
DN g
f UP
Adjusting Source Signal Level
Changing Backlighting Colour
1
2
Press and hold the INTLZ button for at least 2
If the difference in volume level between the CD
player and FM radio is too great, adjust the FM
signal level as follows.
seconds.
Press the f UP button repeatedly to select
"AMBER".
Each press of the f UP button changes the
modes as shown:
1
2
Press and hold the INTLZ button for at least 2
seconds.
NOTE
If you press the DN g button the display scrolls in
Press the f UP button repeatedly to select
"FM-LV."
Each press of the f UP button scrolls the
modes as follows:
reverse sequence.
→ FM-LV → REG → PTY31 → AMBER → DIM → SUB
DEMO ← AUX ← SCR ← MUTE ← BEEP ←
Press the TUNE button to toggle the mode
between AMBER ON (amber) and AMBER OFF
(green).
3
4
→ FM-LV → REG → PTY31 → AMBER → DIM → SUB
DEMO ← AUX ← SCR ← MUTE ← BEEP ←
NOTE
Press and hold the INTLZ button for at least 2
seconds to set the selected mode.
When you press the DN g button, the display scrolls
in the reverse sequence.
Dimmer Control
3
4
Press the TUNE button to select the FM signal
level mode. Each press toggles between "FM-LV
HI" (High) and "FM-LV LO" (Low).
Set the DIMMER control to AUTO to decrease the
illumination brightness of the unit with the head
lights of the vehicle ON. This mode is useful if you
feel the unit's backlighting is too bright at night.
Press and hold the INTLZ button for at least 2
seconds to activate the normal mode.
1
2
Press and hold the INTLZ button for at least 2
seconds.
Press the f UP button repeatedly to select
"DIM".
Each press of the f UP button scrolls the
modes as shown:
→ FM-LV → REG → PTY31 → AMBER → DIM → SUB
DEMO ← AUX ← SCR ← MUTE ← BEEP ←
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
3
4
Press the TUNE button to select the Dimmer mode.
Each press toggles between DIM AUTO and DIM
MANU.
Press and hold the INTLZ button for at least 2
seconds to activate the normal mode.
6
-E N
Download from Www.Somanuals.com. All Manuals Search And Download.
Subwoofer On and Off
Turning Mute Mode On/Off
1
2
Press and hold the INTLZ button for at least 2
seconds.
If a device having the interrupt feature is
connected, audio will be automatically muted
whenever the interrupt signal is received from the
device. This function can be turned ON or OFF
from the head unit by following procedure below.
Press the f UP button repeatedly to select
"SUB."
Each press of the f UP button changes the
modes as shown:
1
2
Press and hold the INTLZ button for at least 2
seconds.
→ FM-LV → REG → PTY31 → AMBER → DIM → SUB
DEMO ← AUX ← SCR ← MUTE ← BEEP ←
Press the f UP button to select the MUTE
mode. Each press changes the modes as shown:
NOTE
→ FM-LV → REG → PTY31 → AMBER → DIM → SUB
DEMO ← AUX ← SCR ← MUTE ← BEEP ←
If you press the DN g button the display scrolls in
reverse sequence.
NOTE
3
Press the TUNE button to toggle mode between
SUB-W ON and SUB-W OFF.
If you press the DN g button the display scrolls in
reverse sequence.
3
4
Press the TUNE button to turn on or off the Mute
mode.
Each press toggles between the MUTE ON and
OFF modes.
If an Ai-NET compatible processor with
Subwoofer output is connected:
Press the TUNE button after selecting the SUB-W
ON mode, and the subwoofer output phase is
toggled SUBW NOR (0°) or SUBW REV (180°).
NOTE
The initial setting at the factory is "MUTE ON."
Press and hold the INTLZ button for at least 2
seconds again to return to normal operation.
4
5
Press and hold the INTLZ button for at least 2
seconds after setting the SUB-W ON.
Press the MODE (Audio Control) knob
repeatedly to select the SUB-W mode.
CD Text Scroll Setting
→ SUB-W
→ BAS → TRE
→ BAL
This CD player has the ability to scroll the disc
and track name recorded on CD-Text discs. The
scrolling feature will work with names greater than
8 characters.
VOL ←
FAD ←
6
Rotate MODE (Audio Control) knob until the
desired sound is obtained in each mode.
1
2
Press and hold the INTLZ button for at least 2
seconds.
Sound (Beep) Guide Function
Press the f UP button repeatedly to select
"SCR".
Each press of the f UP button changes the
modes as shown:
This function will give audible feedback with
varying tones depending upon the button pressed.
→ FM-LV → REG → PTY31 → AMBER → DIM → SUB
DEMO ← AUX ← SCR ← MUTE ← BEEP ←
1
2
Press and hold the INTLZ button for at least 2
seconds.
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
Press the f UP button repeatedly to select
"BEEP."
Each press of the f UP button changes the
modes as shown:
3
4
Press the TUNE button to toggle mode between
SCR AUTO and MANU.
• SCROLL AUTO: the display of CD text is
scrolled continuously.
• SCROLL MANUAL: the display is scrolled only
when a disc is loaded or when a track is
changed.
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
→ FM-LV → REG → PTY31 → AMBER → DIM → SUB
DEMO ← AUX ← SCR ← MUTE ← BEEP ←
When the setting is completed, press and hold
the INTLZ button for at least 2 seconds to return
to the normal mode.
3
4
Press the TUNE button to toggle the mode
between BEEP ON and BEEP OFF.
NOTES
• Initial mode is "SCR MANU".
NOTE
• The unit scrolls only CD text names. The disc titles
input manually (refer to page 18) cannot be scrolled.
The initial setting at the factory is BEEP ON.
Press and hold the INTLZ button for at least 2
seconds to set the selected mode.
7
-E N
Download from Www.Somanuals.com. All Manuals Search And Download.
Ba sic Op e ra tion
MODE
INTLZ/DISP
SOURCE
A.PROC
TUNE
DN g
f UP
Setting the AUX Mode
Demonstration
You can input TV/video sound by connecting an
optional Ai-NET/RCA Interface cable (KCA-121B)
to this component.
This unit has the Demonstration feature which
simulates the display functions on the display panel.
1
2
Press and hold the INTLZ button for at least 2
seconds.
1
Press and hold the INTLZ button for at least 2
seconds.
Press the f UP button to select the DEMO
mode. Each press changes the modes as shown:
2
Press the f UP button repeatedly to select
"AUX" .
Each press of the f UP button changes the
modes as shown:
→ FM-LV → REG → PTY31 → AMBER → DIM → SUB
DEMO ← AUX ← SCR ← MUTE ← BEEP ←
NOTE
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
If you press the DN g button the display scrolls in
reverse sequence.
3
4
Press the TUNE button to turn on or off the
DEMO mode.
Each press toggles between DEMO ON and
DEMO OFF.
→ FM-LV → REG → PTY31 → AMBER → DIM → SUB → BEEP
DEMO ← AUX (AUX Mode Display Setting ) ← SCR ← MUTE ←
∗
∗ Displayed after AUX ON is set.
3
Press the TUNE button to toggle the mode
between AUX ON and AUX OFF.
If no buttons are pressed 30 seconds after the
DEMO mode is turned ON, "DEMO" blinks 3
times in the display. The DEMO mode then
begins.
NOTES
• The initial setting at the factory is AUX OFF.
• You can set the AUX mode display by pressing the DN
g or f UP button after AUX ON is set, select
the AUX mode display setting, and then press the
TUNE button.
NOTE
The initial setting at the factory is "DEMO OFF."
Press and hold the INTLZ button for at least 2
seconds again to return to normal operation.
4
5
Press and hold the INTLZ button for at least 2
seconds to return to the normal mode.
To adjust the volume, etc., first press the
SOURCE button and select the AUX mode, then
make the necessary adjustment.
→ TUNER → CD → AUX
NOTE
When AUX ON is selected, you cannot select the changer
to be used even for a connected changer.
8
-E N
Download from Www.Somanuals.com. All Manuals Search And Download.
6. SUBW (Change the Subwoofer Phase):
Adjusting the built -in Audio
Processor
NOR ↔ REV
You can change the subwoofer phase.
(Only available when using the subwoofer output
from this unit.)
You can change the Bass/Treble Frequency
emphasis, High Pass Filter, Low Pass Filter, and
Sub Woofer Phase on this unit, so that you can
create your favorite sound effects.
7. DEFP (Defeat On and Off):
ON ↔ OFF
When DEFEAT is turned ON, all items 1 to 6 are
set to default values.
When DEFEAT is turned OFF, all items 1 to 6
resume their last set values.
1
2
Press the A.PROC button for at least 3 seconds
to enter Bass/Treble parameter setting mode.
Default values
BC: 80 Hz
BW: WIDE1
TC: 10.0kHz
HP: OFF
LP: OFF
SUBW (Phase): NOR
Within 5 seconds, press the DN g or
f UP button repeatedly to select the desired
parameter.
∗
→
BC or BW
DEFP ←
→ TC
SUBW ←
→ HP
LP ←
∗
Each time you press the MODE (Audio Control)
knob, the BC and BW change alternatery.
NOTES
• If you turn the battery power OFF, all settings return
to factory default.
3
Press the MODE (Audio Control) knob to toggle
between the BC and BW.
• If HP, LP, BC, and TC are all set to ON, depending on
the BC and TC settings, you may not be able to
reinforce the sound effect.
1. BC (Setting the Bass Frequency):
→ 60Hz → 70Hz → 80Hz → 90Hz
180Hz ← 150Hz ← 130Hz ← 100Hz ←
• Except when the HP and LP is turned OFF, the
subwoofer is in monaural mode.
• When the subwoofer is set to OFF, LP mode and
change of phase does not work.
• If no buttons are pressed within 5 seconds, the display
for setup menu disappears while an ordinary menu
appears on the display.
Emphasizes the displayed Bass frequency
ranges.
2. BW (Setting the Bass Band Width):
(Q-Factor)
→ WIDE1 → WIDE2 → WIDE3 → WIDE4
Switching the Display Modes
.................................
(Narrow)←
→ (Wide)
1
Press the DISP (DISPLAY) button to select the
desired Display pattern mode.
Changes the displayed frequency’s band width
to narrow or wide.
Each press changes the display patterns.
NOTE
A narrow or wide wave pattern on the display will
indicate the selected band width.
Pattern Description
3. TC (Setting the Treble Frequency):
1
2
3
4
5
6
7
Frequency Pattern
→ 10.0kHz → 12.5kHz → 15.0kHz → 17.5kHz
Normal Pattern (Upward)
Peak Value Increasing Pattern
Elevator (left/right) Pattern
Elevator (up/right) Pattern
Warp Pattern
Emphasizes the displayed treble frequency
ranges.
4. HP (Setting the High Pass Filter):
→ OFF → 80Hz → 120Hz → 160Hz
Center Division Pattern
Outputs all frequencies higher than that selected
according to your preference.
Scan Display
5. LP (Setting the Low Pass Filter):
8
(Repeats from Pattern 1 to Pattern 7
for every 5 seconds endlessly.)
→ OFF → 160Hz
→ 120Hz → 80Hz
9
Mode Display
Outputs all frequencies lower than that selected
according to your preference.
10
Silent Display (Spectrum analyzer off)
(Only available when using the subwoofer output
from this unit.)
9
-E N
Download from Www.Somanuals.com. All Manuals Search And Download.
Ra d io Op e ra tion
BAND
SOURCE
Preset buttons (1 through 6)
AF
TUNE/A.ME
DN g
f UP
Manual Tuning
Automatic Seek Tuning
1
Press the SOURCE button until a radio
frequency appears in the display.
1
Press the SOURCE button until a radio
frequency appears in the display.
2
Press the BAND button repeatedly until the
desired radio band is displayed.
2
Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the band:
Each press changes the band:
→ FM1 → FM2 → FM3 → MW → LW
→ FM1 → FM2 → FM3 → MW → LW
3
4
Press the TUNE button to illuminate the DX and
SEEK indicators in the display.
With the DX (Distance) mode activated, both
strong and weak stations will be tuned in the
Auto-Seek operation.
Press again to return to the local mode. The DX
indicator will turn off and the SEEK indicator will
remain illuminated. Now, only strong stations will
be tuned.
3
4
Press the TUNE button repeatedly until "DX
SEEK" and "SEEK" disappear from the display.
NOTE
The initial mode is DX SEEK.
Press the DN g or f UP button to move
downward or upward one step respectively until
the desired station frequency is displayed.
NOTE
The ST indicator appears on the display when a Stereo
FM station is tuned in.
Press the DN g or f UP button to
automatically seek for a station downward or
upward respectively.
The unit will stop at the next station it finds.
Press the same button again to seek the next
station.
10
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Storing of Station Presets
Tuning to Preset Stations
1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
1
2
3
Press the SOURCE button to select the radio
mode.
2
Press and hold any one of the Preset buttons (1
through 6) for at least 2 seconds until the station
frequency on the display blinks.
Press the BAND button repeatedly until the
desired band is displayed.
Press the station Preset button that has your
desired radio station in memory.
The display shows the band, preset number with
a triangle and frequency of the station selected.
3
4
Press the Preset button into which you wish to
store the station while the frequency display is
blinking (within 5 seconds).
The display stops blinking once the station has
been memorized. The display shows the band,
preset No. with a triangle (9) and station
frequency memorized.
Auto Station Search While
Travelling
Repeat the procedure to store up to 5 other
stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
A total of 30 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
FM3, MW and LW).
This function will automatically search for up to 12
stations receivable in the region you are in and
store them in temporary memory.
Use this function when you are travelling in a
region away from home.
1
Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the radio bands as follows:
NOTE
If you store a station in a preset memory which already
has a station, the current station will be cleared and
replaced with the new station.
→ FM1 → FM2 → FM3 → MW → LW
Automatic Memory of Station
Presets
2
Press and hold the AF button for at least 2
seconds to activate the Travel Search mode. The
unit will automatically search and store up to 12
stations (max.) receivable in the region you are
travelling.
1
2
3
Press the SOURCE button to select the radio
mode.
3
4
To recall a station stored, press the DN g or
f UP button.
Press the BAND button repeatedly until the
desired radio band is displayed.
To deactivate the Travel Search mode, press the
AF button for at least 2 seconds.
Press and hold the A. ME button for at least 2
seconds.
NOTES
The frequency on the display continues to
change while the automatic memory is in
progress. The tuner will automatically seek and
store 6 strong stations in the selected band.
They will be stored into presets 1 to 6 buttons in
order of signal strength.
• If no stations are stored, the display shows "NO
MEMORY."
• When the radio band is changed, the stations stored in
memory using this function will be erased.
When the automatic memory has been
completed, the tuner goes to the station stored in
the preset location No. 1.
NOTE
If no stations are stored, the tuner will return to the
original station you were listening to before the auto
memory procedure began.
11
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
RDS Op e ra tion
TITLE
SOURCE
INTLZ
T.INFO
BAND
Preset buttons
(1 through 6)
AF
TUNE
DN g
f UP
F
PTY
4
Press the AF button to deactivate the RDS
mode.
Setting RDS Reception Mode and
Receiving RDS Stations
Tips
The RDS digital data includes the followings:
The RDS (Radio Data System) is a radio
information system using the 57 kHz subcarrier of
regular FM broadcast. The RDS allows you to
receive a variety of information such as traffic
information, station names, and to automatically
re-tune to a stronger transmitter that is
PI
PS
AF
TP
TA
Programme Identification
Programme Service Name
List of Alternative Frequecncies
Traffic Programme
Traffic Announcement
Programme Type
PTY
EON
Enhanced Other Networks
broadcasting the same programme.
R.TEXT Radio Text Information
1
Press the SOURCE button until a radio
frequency appears in the display.
Recalling Preset RDS Stations
1
Press the AF button to activate the RDS mode.
The display shows "AF" when the RDS mode is
activated.
2
3
Press the AF button to activate the RDS mode.
Press the DN g or f UP button to tune in
the desired RDS station.
2
Press the 1 through 6 buttons in which your
desired RDS station is preset. If the preset
station's signal is weak, the unit automatically
searches and tunes to a stronger station in the
AF (Alternative Frequencies) list.
NOTE
When the BAND button is pressed for at least 2 seconds
while the PS (Programme Service Name) is being
displayed, the display shows the station frequency. To
show the PS (Programme Service Name) in the display,
press the BAND button for at least 2 seconds again.
3
If the preset station and the stations in the AF list
cannot be received:
When the RDS station signal received has
become weak:
The unit searches again for a station in the PI
(Programme Identification) list.
AF seek mode, press and hold the TITLE button
for at least 2 seconds to have the unit
automatically seek a stronger station in the AF
list.
If there are still no stations receivable in the
area, the unit displays the frequency of the
preset station and the preset indicator
disappears.
If there is no AF station, the display shows
"SEEK END."
If the signal level of the Regional (Local) station
being tuned becomes too weak to receive, press
the same preset location button to tune in a
Regional station in other district.
NOTE
For presetting the RDS stations, refer to the Radio
Operation section. The RDS stations can be preset in the
FM1, FM2 and FM3 bands only.
12
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving RDS Regional (Local)
Stations
PTY (Programme Type) Tuning
1
Press the "F" button. The FUNC indicator will
illuminate.
1
Press and hold the INTLZ button for at least 2
seconds to activate the setting mode.
2
Press the PTY button to activate the PTY mode.
The Programme Type of the station being
currently received will be displayed for 5
seconds.
2
Press the f UP button repeatedly to select
"REG" Each press of the f UP button scrolls
the modes as shown:
• If there is no receivable PTY broadcast, "NO
PTY" will be displayed for 5 seconds.
• If no RDS station can be received, the display
shows "NO PTY."
→ FM-LV → REG → PTY31 → AMBER → DIM → SUB
DEMO ← AUX ← SCR ← MUTE ← BEEP ←
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
NOTE
If no button is pressed within 5 seconds after pressing the
PTY button, the PTY mode will be automatically
cancelled.
3
4
Press the TUNE button to turn on or off the REG
(Regional) mode.
In the REG OFF mode, the unit automatically
keeps receiving the related local RDS station.
3
4
Press the DN g and f UP buttons within 5
seconds after activating the PTY mode to
choose the desired programme type while the
PTY (programme type) is being displayed. Each
press scrolls the programme type by one.
Press and hold the INTLZ button for at least 2
seconds to deactivate the setting mode.
Receiving Traffic Information
→ LIGHT M → CLASSICS → OTHER M
1
Press the T.INFO button to activate the Traffic
Information mode.
To cancel the Traffic information mode, press the
T.INFO button again.
Press the PTY button within 5 seconds after
selecting the programme type to start searching
for a station in the selected programme type.
The chosen programme type indicator blinks
during searching and lights when a station is
found.
2
Press the DN g or f UP button to select
your desired traffic information station. When a
traffic information station is tuned in, the TP
indicator lights up.
If no station is found, "NO PTY" will be displayed
for 5 seconds.
Traffic information is heard only when it is being
broadcast. If traffic information is not being
broadcast, the unit is set in the standby mode.
When a traffic information broadcast begins, the
unit automatically receives it and the display
shows "TRF-INFO" for 5 seconds, then returns
to the previous display.
5
Press the "F" button to activate the normal
mode. The FUNC indicator will turn off.
NOTE
Operate the unit while the FUNC indicator is
illuminated.
If no buttons are pressed within 5 seconds, the FUNC
indicator will turn off.
When traffic information broadcast is over, the
unit will automatically set in the standby mode.
NOTES
• If the traffic information broadcast signal falls below a
certain level, the unit remains in the receiving mode
for 1 minute. If the signal remains below a certain
level for over 1 minute, the "T.INFO" indicator blinks.
• If you do not want to listen to the traffic information
being received, lightly press the T.INFO button to skip
that traffic information message. The T.INFO mode
will remain in the ON position to receive the next
traffic information message.
• If the volume level is changed while receiving traffic
information, the changed volume level will be
memorized. When traffic information is received next
time, the volume level will be automatically adjusted
to the level memorized.
• In the T.INFO mode, the SEEK tuning selects only the
TP stations.
13-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
RDS Op e ra tion
INTLZ
T.INFO
R.TEXT
P.PTY
TUNE
DN g
fUP
F
Receiving Traffic Information While
Playing CD or Radio
Priority PTY (Programme Type)
This function allows presetting of a programme
type such as music category, news, etc. You can
listen to a programme in the preset programme
type as the unit automatically gives priority to the
preset programme type when it begins
broadcasting, and interrupts the programme you
are currently listening. This feature is functional
when your unit is set to a mode other than the LW
and MW.
1
Press the T.INFO button repeatedly until the
T.INFO indicator appears in the display.
2
Press the DN g and f UP buttons to
select a traffic information station if necessary.
• When a traffic information broadcast starts, the
unit automatically mutes the CD player or the
regular FM broadcast.
• When the traffic information broadcast finishes,
the unit automatically returns to the original
source play before the traffic information
broadcast began.
1
2
Press the "F" button. The FUNC indicator will
illuminate.
• When traffic information stations cannot be
received:
In the tuner mode:
Press the P. PTY button to activate the
PRIORITY PTY mode.
"PRIO-PTY" is displayed for 2 seconds and then
the programme type for 3 seconds. The initial
setting is "NEWS."
When the TP signal can no longer be
received for over 1 minute, the "T.INFO"
indicator blinks.
NOTE
In the CD mode:
If no button is pressed within 5 seconds after pressing the
P. PTY button, the PRIORITY PTY mode is automatically
cancelled.
When the TP signal can no longer be
received, the traffic information station of
another frequency will be selected
automatically.
3
Press the DN g or f UP button within 5
seconds while "NEWS" is being displayed to
choose a desired programme type. Then press
P. PTY button. The PRIORITY PTY function will
activate.
NOTE
The receiver is equipped with the EON (Enhanced Other
Networks) function in order to keep track of additional
alternative frequencies to the AF list. The EON indicator
appears while an RDS EON station is being received. If
the station being received does not broadcast the traffic
information, the receiver automatically tunes in the
related station that broadcasts the traffic information
when it occurs.
3
Press the T.INFO button to deactivate the Traffic
Information mode. The T.INFO indicator
disappears.
14-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Press the P. PTY button to activate the
PRIORITY PTY mode again.
Displaying Radio Text
• To change the programme category, perform
the step 3.
• To disable the PRIORITY PTY function, press
the P. PTY button.
Text messages from a radio station can be
displayed.
1
2
3
Tune in a radio station that transmits text
messages.
NOTE
In the PRIORITY PTY function, unlike in the T.INFO
function, the volume does not increase during operation.
Press the "F" button. The FUNC indicator
illuminates.
Press the "F" button to activate the normal
mode. The FUNC indicator will turn off.
Press the R.TEXT button to activate the Radio
Text mode. The display shows "WAIT" for a few
seconds, then starts scrolling the text message.
It continues until other operation is performed.
NOTE
Operate the unit while the FUNC indicator is
illuminated.
If no buttons are pressed within 5 seconds, the FUNC
indicator will turn off.
4
5
To cancel the Radio Text mode, press the
R.TEXT button.
Turning Emergency Alarm On or
Off
Press the "F" button to return to the normal
operation mode. The FUNC indicator disappears
from the display.
1
Press and hold the INTLZ button for at least 2
seconds.
NOTES
• If there is no receivable text message or the unit
cannot receive a text message properly, the display
shows "NO TEXT" for 2 seconds.
• Operate the unit while the FUNC indicator is
illuminated.
2
Press the f UP button repeatedly to select
"PTY31" Each press of the f UP button
scrolls the modes as shown.
If no buttons are pressed within 5 seconds, the FUNC
indicator will turn off.
→ FM-LV → REG → PTY31 → AMBER → DIM → SUB
DEMO ← AUX ← SCR ← MUTE ← BEEP ←
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
3
4
Press the TUNE button repeatedly to select the
PTY31 ON or PTY31 OFF mode.
In the PTY31 ON mode, the unit will show
"ALARM" in the display when the unit receives
the PTY31 (Emergency Broadcast) signal.
Press and hold the INTLZ button for at least 2
seconds to activate the selected mode.
15
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Pla ye r Op e ra tion
M.I.X.
SCAN
-/J
DN g
f UP
RPT
c
Playback
Opening and Closing the Movable
display
1
Press the c button.
The movable display will open.
1
Press the c button.
The movable display will open.
Insert a disc with the label side facing up.
(Movable display fully opened)
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
The movable display will close and playback will
begin.
When a disc is already inserted, press the
SOURCE button to switch to the CD mode.
The mode will change every time the button is
pressed.
To close the movable display, press the c button
again.
The movable display will close.
NOTES
• Do not apply shock to the movable display when it is
open as it may result in malfunction of the unit.
• The display may be dim during low temperatures and
immediately after turning on the power. The brightness
will return to normal as time elapses.
→ TUNER → CD → CD CHANGER∗
• The display will stop at the set angle when closing.
(∗ Only when the CD changer is connected)
CAUTION
3
4
To pause playback, press the -/J button.
Pressing the -/J button again will resume
playback.
Keep hands (or any other object) away from the display
while it is opening or closing to avoid damage or injury.
The back of the movable display will get very warm
under normal operating conditions. This is not a
malfunction. Do not touch.
To eject the disc, press the c button.
NOTES
• Three-inch (8cm) CD's can be used.
• If the CD does not eject, press c button again for at
least 3 seconds with the movable display open.
• Only com.pact discs containing the mark shown can
be used.
• We cannot fully guarantee the playback of CD-R (CD-
Recordable). You cannot playback CD-RW (CD-
ReWritable) on this unit.
16
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Sensor (Skip)
M.I.X. (Random Play)
1
Press the M.I.X. button in the play or pause mode.
The M.I.X. indicator will illuminate and the tracks
on the disc will be played back in a random
sequence. After all the tracks on the disc have
been played back once, the player will begin a
new random sequence play until the M.I.X. mode
is cancelled.
1
Momentarily press the DN g button once
during CD play to return to the beginning of the
current track. If you wish to access the beginning
of a track further back, repeatedly press until you
reach the desired track.
Press the f UP button once to advance to the
beginning of the next track. If you wish to access
the beginning of a track further ahead, press
repeatedly until the desired track is reached.
To cancel M.I.X. play, press the M.I.X. button
again to turn off the M.I.X.
NOTE
NOTES
The music sensor feature is functional in the play or
• If a CD Changer equipped with the ALL M.I.X. function
is connected, ALL M.I.X. will also be selectable.
In this mode, the tracks on all the CDs in the current
magazine will be included in the random playback
sequence.
pause mode.
Fast Forward and Backward
1
Press and hold the DN g or f UP button to
quickly move backward or forward until you
reach the desired section of the track.
→
→
→
M.I.X. ALL M.I.X. (off)
• In case a 6-disc CD changer is connected:
In CD changer mode, press the "F" button to illuminate
the FUNC indicator and go to step 1 within 5 seconds.
• In case a 12-disc CD changer is connected:
In changer mode, press the "F" button twice to
illuminate the FUNC indicator and go to step 1 within
5 seconds.
Repeat Play
1
Press the RPT(Repeat) button to play back
repeatedly the track being played.
The RPT indicator appears and the track will be
played repeatedly.
Scanning Programmes
Press the RPT button again and select OFF to
deactivate the repeat play.
1
Press the SCAN button to activate the Scan
mode.
The first 10 seconds of each track will be played
back in succession.
NOTES
• If a CD Changer is connected and the REPEAT ALL
mode is selected, the unit repeatedly plays back all
tracks on the disc selected.
To stop scanning, press the SCAN button and
deactivate the Scan mode.
→
→
→
REPEAT
REPEAT ALL
(off)
NOTES
• In case a 6-disc CD changer is connected:
In CD changer mode, press the "F" button to illuminate
the FUNC indicator and go to step 1 within 5 seconds.
• In case a 12-disc CD changer is connected:
In changer mode, press the "F" button twice to
illuminate the FUNC indicator and go to step 1 within
5 seconds.
• In case a 6-disc CD changer is connected:
In CD changer mode, press the "F" button to illuminate
the FUNC indicator and go to step 1 within 5 seconds.
• In case a 12-disc CD changer is connected:
In changer mode, press the "F" button twice to
illuminate the FUNC indicator and go to step 1 within
5 seconds.
17
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Pla ye r Op e ra tion
TITLE
SOURCE
Disc Select buttons (1 through 6)
MODE
-/J
DN g
f UP
Displaying the Title/Text
Titling Discs
1
Press the TITLE button and select the title
display mode.
For details, see Displaying the Title/Text (see
this page).
It is possible to display the CD title if the title has
been previously inputted. For details, see Titling
Discs (see this page). Text information, such as
the disc name and the track name, will be
displayed if playing a CD text compatible disc.
2
3
Press and hold the TITLE button for at least 3
seconds. The first charactor will blink.
1
Press the TITLE button.
The mode will change every time the button is
Rotate the MODE (Audio Control) knob to select
the desired letter/numeral/symbol available for
naming. ("A" for example).
pressed.
About "Title" and "Text"
Title:
With this device, it is possible to input the
CD name (see this page). This inputted name
is referred to as a "title."
4
Press the MODE (Audio Control) button to store
the first character. The first character will stop
blinking and the display will automatically
advance to the next character. When that
character begins to blink, you may choose the
next letter or symbol of your title.
Text:
Text compatible CDs contain text
information such as the disc name and track
name. Such text information is referred to as
"text."
CD/Changer mode:
↓
ELAPSED TIME DISPLAY
↓
TEXT DISPLAY (DISC NAME)∗1
↓
TEXT DISPLAY (TRACK NAME)∗1
↓
TITLE DISPLAY∗2
∗1
∗2
Displayed during playback of text compatible
CD. "NO TEXT" will be displayed when the
CD is not text compatible.
"--------" will be displayed when the title has
not been inputted.
Sample display when text compatible CD
NOTES
• Some characters may not be displayed correctly with
this device, depending on the character type.
• The display may not show all the information of the
CD Text depending on the CD changer.
18
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Repeat the steps 3 and 4 above to complete the
titling. Pressing the MODE (Audio Control) button
after entering the eighth character, automatically
stores the title into memory.
Controlling CD Changer (Optional)
An optional 6-disc or 12-disc CD Changer may be
connected to the CDA-7865R if it is Ai-NET
compatible. With a CD Changer connected to the
Ai-NET input of the CDA-7865R, the CD Changer
will be controllable from the CDA-7865R.
Using the KCA-400C (the Multi-Changer Switching
device) multiple changers can be controlled by the
CDA-7865R.
When entering a title of less than 8 characters
(for example, 3 character title):
After entering 3 characters to complete your title,
the 4th character space will be blinking. Go to
step 6 to complete the title.
See the Multi-Changer Selection section on page
20 for selecting the CD Changers.
Press and hold the TITLE button for at least 3
seconds to record the title.
NOTES
NOTES
• The controls on the CDA-7865R for CD Changer
operation are operative only when a CD Changer is
connected.
• The "Changer" indicator illuminates in the CD Changer
mode.
• The memory capacity for the disc titles is 18. If you try
to store beyond the limit, the display will show "FULL
DATA." At this point, no more titles can be stored.
• To input a new title, one of the previously inputted
titles must first be deleted.
• When you want to erase a title, enter the " " symbol
into all spaces.
1
2
Press the SOURCE button to activate the
CHANGER mode. The display shows the
"Changer," disc number and track number.
• The CD Changer title length or memory capacity
varies depending upon the model being used.
• Removing power from the unit may delete these titles.
Use caution when manipulating the power cord.
NOTE
The source indicator varies depending on the connected
source.
Erasing Disc Title
Press the Disc Select buttons (1 through 6)
corresponding to one of the discs loaded in the
CD Changer. The selected disc number appears
in the display and CD playback starts.
1
Press the TITLE button to select the disc titling
mode. Then, press and hold for at least 3
seconds.
NOTES
2
Press and hold the -/J button for at least 2
seconds to activate the title scanning mode. The
title in the display will blink.
• After selecting the desired disc, you can operate in the
same way as for the CDA-7865R CD player.
For details, please see the CD Operation section.
• If the FUNC indicator is illuminated the Disc Select
buttons become nonfunctional.
3
4
5
Press the DN g or f UP button repeatedly
unitl the disc title you want to erase is displayed.
When a 12-disc CD Changer is connected:
To select discs numbered from 1 to 6, the
procedure is the same as for the 6-disc CD
Changer. To select discs numbered from 7 to 12,
first press the "F" button. This changes the "D"
indicator to "d." Then press the desired Preset
button. With the "F" button activated, the Preset
buttons 1 to 6 will represent discs 7 to 12
respectively.
Press and hold the -/J button for at least 2
seconds to erase the disc title displayed.
Press and hold the TITLE button for at least 3
seconds to cancel the disc title erasing mode.
NOTE
You cannot erase a CD-TEXT.
19
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Pla ye r Op e ra tion
SOURCE
BAND/T.S.M
f UP
DN g
1
Press the SOURCE button on the CDA-7865R to
activate the CD Changer mode.
Searching for Titled Discs
(CD Changer only)
Alternatively, press the SOURCE button on the
Remote Control (RUE-4185) to activate the CD
Changer mode. Proceed to Step 3 below to
select the desired CD Changer.
If a CD is titled, you can do a search for it. (To title
CDs, refer to "Titling Discs" on page 18.)
1
Press and hold the T.S.M. button for at least 2
seconds. The title blinks in the display.
CD-CHG
BAND
PROG
SOURCE
A.PROC
2
3
Press the DN g or f UP button to select
the desired disc title.
BAND
SOURCE
REMOTE CONTROL UNIT RUE
-4185
Press the T.S.M. button to play the selected disc.
The unit will automatically search for the disc
and begin play.
2
3
Press the BAND button on the CDA-7865R or
the RUE-4185 to activate the CD Changer
Selection mode.
4
Press the T.S.M. button for at least 2 seconds to
cancel the disc searching mode.
NOTE
This function cannot be performed when using a multi-
changer switching device.
The CD Changer Selection mode remains active
for 3 seconds after Step 2 is performed. Press
the BAND button until the desired CD Changer
indicator appears on the display.
Multi-Changer Selection
NOTE
If the selected CD Changer is not connected, the display
will show "NO CHGRX."
Alpine's Ai-NET system will support up to 6 CD
Changers. When operating two or more changers,
the KCA-400C (Multi-Changer Switching device)
must be used. If you use 1 Switching device, you
can connect up to 4 CD Changers. If you use 2
Switching devices, you can connect up to 6 CD
Changers.
Alternatively press the BAND button on the
Remote Control until the desired changer
indicator appears on the display.
4
To operate the selected changer, see "CD
Operation" section.
20
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Re m ote Control Op e ra tion
VOLUME
MUTE
6
7
8
1
PWR
2
ENT
3
9
!
CD-CHG
4
BAND
PROG
SOURCE
A.PROC
5
#
"
REMOTE CONTROL UNIT RUE
-4185
Controls on Remote Control
1 Mute Button
8 g Button
Press the button to lower the volume by 20 dB
instantly. Press the button again to cancel.
Radio mode: SEEK (DN) Button
CD mode: Press the button to go back to the
beginning of the current track.
2 Power Switch
Press the switch to turn the power on/off.
9 f Button
Radio mode: SEEK (UP) Button
CD mode: Press the button to advance to the
beginning of the next track.
3 -/J Button
Press the button to switch between the Play and
Pause modes for CD.
! 9 Button
4 CD Changer Button
Press the button to change to the CD changer
operation.
Radio mode: Pressing the button will select, in
descending order, stations programmed into the
radio's presets as shown below.
5 Band/Programme Button
Radio mode: BAND Button
Press the button and the band will change as
shown below.
→ 6 → 5 ... 1
CD Changer mode: DISC Select (DN) Button
Press the button to select a disc in descending
order.
→ FM1 → FM2 → FM3 → MW → LW
6 Volume Adjustment Buttons
To increase the volume level:
Press the L button
" Source Button
Press to select the audio source.
To decrease the volume level:
Press the K button
# Audio Processor Button∗∗
Press the button to call the external audio
processor mode.∗
7 8 Button
Radio mode: Pressing the button will select, in
ascending order, stations programmed into the
radio's presets as shown below.
∗ For the operation of external audio processor, refer to the
Owner's Manual of the external audio processor you
purchased.
∗∗ This button is used in conjunction with an optional Ai-
→ 1 → 2 ... 6
NET processor.
CD Changer mode: DISC Select (UP) Button
Press the button to select a disc in ascending
order.
21
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Replacement
Applicable battery: Use two "AAA" sized dry
batteries or equivalent.
1
Opening the battery cover
Slide out the battery cover while firmly pressing
outward.
2
Replacing the battery
Put the batteries in the case observing the
polarities as illustrated.
e
d
d
e
3
Closing the cover
Push the cover as illustrated until a click is
heard.
22
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Inform a tion
CD
In Case of Difficulty
CD Player/Changer not functioning.
• Out of operating temperature range +50˚C (+120˚F)
for CD.
- Allow the vehicle's interior (or trunk) temperature to
cool.
CD playback sound is wavering.
• Moisture condensation in the CD Module.
- Allow enough time for the condensation to evaporate
(about 1 hour).
If you encounter a problem, please review the
items in the following checklist. This guide will
help you isolate the problem if the unit is at fault.
Otherwise, make sure the rest of your system is
properly connected or consult your authorized
Alpine dealer.
CD insertion not possible.
• A CD is already in the CD player.
- Eject the CD and remove it.
Basic
No function or display.
• Vehicle's ignition is off.
• The CD is being improperly inserted.
- Make sure the CD is being inserted following
instructions in the CD Player Operation section.
Unable to fast forward or backward the CD.
• The CD has been damaged.
- Eject the CD and discard it; using a damaged CD in
your unit can cause damage to the mechanism.
CD playback sound skips due to vibration.
• Improper mounting of the unit.
- If connected following instructions, the unit will not
operate with the vehicle's ignition off.
• Improper power lead connections.
- Check power lead connections.
• Blown fuse.
- Check the fuse on the battery lead of the unit; replace
with the proper value if necessary.
• Internal micro-computer malfunctioned due to
interference noise etc.
- Securely re-mount the unit.
- Press the RESET switch with a ball-point pen or other
pointed article.
• Disc is very dirty.
- Clean the disc.
• Disc has scratches.
- Change the disc.
CD playback sound skips without vibration.
• Dirty or scratched disc.
Radio
Unable to receive stations.
- Clean the disc; damaged disc should be replaced.
Error displays (built-in CD player only)
• Mechanical error
- Press the c button. After the error indication
disappears, insert the disc again. If the above-
mentioned solution does not solve the problem,
consult your nearest ALPINE dealer.
• No antenna or open connection in cable.
- Make sure the antenna is properly connected;
replace the antenna or cable if necessary.
Unable to tune stations in the seek mode.
• You are in a weak signal area.
- Make sure the tuner is in the DX mode.
• If the area you are in is a primary signal area, the
antenna may not be grounded and connected properly.
- Check your antenna connections; make sure the
antenna is properly grounded at its mounting location.
• The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken,
replace the antenna with a new one.
Broadcast is noisy.
• The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
• The antenna is poorly grounded.
- Make sure the antenna is grounded properly at its
mounting location.
23
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Inform a tion
Indication for CD Changer
HI TEMP
NO MAGZN
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature
returns to within operation range.
• No magazine is loaded into the CD Changer.
- Insert a magazine.
NO DISC
ERROR - 01
• No indicated disc.
- Choose another disc.
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject
button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your
Alpine dealer.
• Magazine ejection not possible.
- Press the magaine eject button. If the magazine does
not eject, consult your Alpine dealer.
ERROR - 02
• A disc is left inside the CD Changer.
- Press the Eject button to activate the eject function.
When the CD Changer finishes the eject function,
insert an empty CD magazine into the CD Changer
to receive the disc left inside the CD Changer.
24
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
FM TUNER SECTION
Tuning Range
GENERAL
87.5 – 108.0 MHz
Power Requirement
14.4 V DC
Mono Usable Sensitivity
0.7 µV
(11–16 V allowable)
Alternate Channel Selectivity 80 dB
Maximum Power Output
Output Voltage
Bass
Treble
Weight
60 W × 4
Signal-to-Noise Ratio
Stereo Separation
65 dB
35 dB
4 V/10k ohms
±14 dB at 60 Hz
±14 dB at 10 kHz
1.5 kg (3 lbs. 5 oz)
MW TUNER SECTION
Tuning Range
531 – 1,602 kHz
Sensitivity (IEC Standard)
25.1 µV/28 dB
CHASSIS SIZE
Width
Height
178 mm (7")
50 mm (2")
LW TUNER SECTION
Tuning Range
153 – 281 kHz
Depth
155 mm (6-1/8")
Sensitivity (IEC Standard)
31.6 µV/30 dB
NOSEPIECE SIZE
CD SECTION
Width
Height
Depth
170 mm (6–3/4")
46 mm (1-13/16")
19 mm (3/4")
Frequency Response
Wow & Flutter (% WRMS) Below measurable limits
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
5 – 20,000 Hz (±1 dB)
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
Due to continuous product improvement, specifications and
design are subject to change without notice.
85 dB (at 1 kHz)
REMOTE CONTROL
Battery Type
Battery Quantity
"AAA" sized dry battery
2
Dimensions (W × H × D)
56 mm (2-1/4") × 14 mm
(9/16") × 105 mm (4-1/8")
50 g (1.8 oz)
Weight (without battery)
25
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Insta lla tion a nd Conne c tions
Before installing or connecting the unit, please
read the following and pages 2 and 3 of this
manual thoroughly for proper use.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS.
The wiring and installation of this unit requires special
technical skill and experience. To ensure safety, always
contact the dealer where you purchased this product to
have the work done.
Warning
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire
or product damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL
THEM SECURELY.
Be sure to use only the specified accessory parts. Use of
other than designated parts may damage this unit internally
or may not securely install the unit in place. This may cause
parts to become loose resulting in hazards or product failure.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE
GROUND.
(Check with your dealer if you are not sure.) Failure to do
so may result in fire, etc.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
BEFORE WIRING, DISCONNECT THE CABLE FROM
PINCHED BY A SHARP METAL EDGE.
THE NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due
to electrical shorts.
Route the cables and wiring away from moving parts (like
the seat rails) or sharp or pointed edges. This will prevent
crimping and damage to the wiring. If wiring passes through
a hole in metal, use a rubber grommet to prevent the wire's
insulation from being cut by the metal edge of the hole.
DO NOT ALLOW CABLES TO BECOME ENTANGLED
IN SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual
to prevent obstructions when driving. Cables or wiring
that obstruct or hang up on places such as the steering
wheel, gear lever, brake pedals, etc. can be extremely
hazardous.
DO NOT INSTALL IN LOCATIONS WITH HIGH
MOISTURE OR DUST.
Avoid installing the unit in locations with high incidence
of moisture or dust. Moisture or dust that penetrates into
this unit may result in product failure.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying
capacity of the wire and result in fire or electric shock.
Precautions
• Be sure to disconnect the cable from the (–) battery post
before installing your CDA-7865R. This will reduce any
chance of damage to the unit in case of a short-circuit.
• Be sure to connect the color coded leads according to the
diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicle's electrical system.
• When making connections to the vehicle's electrical
system, be aware of the factory installed components
(e.g. on-board computer). Do not tap into these leads to
provide power for this unit. When connecting the CDA-
7865R to the fuse box, make sure the fuse for the
intended circuit of the CDA-7865R has the appropriate
amperage. Failure to do so may result in damage to the
unit and/or the vehicle. When in doubt, consult your
ALPINE dealer.
DO NOT DAMAGE PIPE OR WIRING WHEN
DRILLING HOLES.
When drilling holes in the chassis for installation, take
precautions so as not to contact, damage or obstruct pipes,
fuel lines, tanks or electrical wiring. Failure to take such
precautions may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR
STEERING SYSTEMS TO MAKE GROUND
CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or
any other safety-related system), or tanks should NEVER
be used for installations or ground connections. Using
such parts could disable control of the vehicle and cause
fire etc.
• The CDA-7865R uses female RCA-type jacks for
connection to other units (e.g. amplifier) having RCA
connectors. You may need an adaptor to connect other
units. If so, please contact your authorized ALPINE
dealer for assistance.
• Be sure to connect the speaker (–) leads to the speaker
(–) terminal. Never connect left and right channel
speaker cables to each other or to the vehicle body.
KEEP SMALL OBJECTS SUCH AS BOLTS OR
SCREWS OUT OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If
swallowed, consult a physician immediately.
IMPORTANT
DO NOT INSTALL IN LOCATIONS WHICH MIGHT
HINDER VEHICLE OPERATION, SUCH AS THE
STEERING WHEEL OR GEARSHIFT.
Doing so may obstruct forward vision or hamper
movement etc. and results in serious accident.
Please record the serial number of your unit in the
space provided below and keep it as a permanent
record. The serial number plate is located on the
bottom of the unit.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
26
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Slide the CDA-7865R into the dashboard. When
the unit is in place, make sure the locking pins are
fully seated in the down position. This can be
done by pressing firmly in on the unit while
pushing the locking pin down with a small
Installation
Metal plate
screwdriver. This ensures that the unit is properly
locked and will not accidentally come out from the
dashboard. Install the Detachable Front Panel.
Detachable
Front panel
Caution
When you install this unit in your car, do not remove
the Detachable Front Panel.
If the Detachable Front Panel is removed during
installation, you might press too hard and warp the
metal plate that holds it in place.
Lock pin
1
Removal
1
2
Rubber Cap
(Included)
Remove the detachable front panel.
Hex Bolt
(Included)
Bracket
Use a small screwdriver (or similar tool) to push
the locking pins to the "up" position (see above
drawing). As each pin is unlocked, gently pull
out on the unit to make sure it does not re-lock
before unlocking the second pin.
Dashboard
3
Pull the unit out, keeping it unlocked as you do so.
Mounting sleeve
(Included)
<JAPANESE CAR>
CDA-7865R
Front frame
Remove the Detachable Front Panel (refer to
page 4). Slide mounting sleeve from main unit
(see Removal Procedure below). Slide the
mounting sleeve into the dashboard.
2
Metal Mounting Strap
Screw
Screws (M5 × 8)
(Included)
Bolt Stud
CDA-7865R
∗
Hex Nut (M5)
CDA-7865R
Mounting Bracket
When your vehicle has the Bracket, mount the
long hex bolt onto the rear panel of the CDA-
7865R and put the Rubber Cap on the hex bolt.
If your vehicle does not have the Mounting
Support, reinforce the head unit with the metal
mounting strap (not supplied). Connect all the
leads of the CDA-7865R according to details
described in the CONNECTIONS section.
NOTE
For the screw ∗, provide a proper screw to the chassis
installing location.
27
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Insta lla tion a nd Conne c tions
Connection
ISO Antenna Convertor Plug
Antenna
ISO Antenna Plug
1
2
(Pink/Black)
AUDIO INTERRUPT IN
To vehicle phone
3
(Blue/White) REMOTE TURN-ON
To amplifier or equalizer
DIMMER
(Orange)
To the instrument cluster
illumination lead
4
5
To power antenna
(Red) IGNITION
9
Ignition Key
(Blue) POWER ANT
6
!
(Black)
GND
choke
coil
7
Battery
(Yellow)
BATTERY
=
8
"
:
CD Changer
(Ai-NET)
(Sold Separately)
Speakers
Front
Amplifier
Amplifier
;
<
>
>
CDA-7865R
Rear or
Subwoofers*
/
Speakers
#
Ai-NET
&
(
$
Rear Left
NORM
EQ/DIV
Front Left
)
~
+
,
Front Right
Rear Right
%
-
.
∗ When Subwoofer is set to OFF: Output is from Rear speakers.
When Subwoofer is set to ON: Output is from Subwoofer.
For details on how to set the Subwoofer to ON/OFF, see "Subwoofer On and Off" on page 7.
28-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Antenna Receptacle
# System Switch
Connect to the supplied ISO antenna convertor plug.
2 Audio Interrupt In Lead (Pink/Black)
Connect this lead to the Audio Interface output of a
cellular phone which provides ground shorting when
a call is received.
When connecting an equalizer or divider using Ai-
NET feature, place this switch in the EQ/DIV
position. When no device is connected, leave the
switch in the NORM position.
NOTE
3 Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
Be sure to turn the power off to the unit before changing
the switch position.
$ Power Supply Connector
4 Dimmer Lead (Orange)
% ISO Connector (Speaker Output)
& Left Rear (+) Speaker Output Lead (Green)
( Left Rear (–) Speaker Output Lead (Green/
Black)
) Left Front (+) Speaker Output Lead (White)
~ Left Front (–) Speaker Output Lead (White/Black)
+ Right Front (–) Speaker Output Lead (Grey/
Black)
This lead may be connected to the vehicle’s
instrument cluster illumination lead. This will enable
the vehicle’s dimmer control to dim the backlighting
of the CDA-7865R.
5 Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s
fuse box or another unused power source which
provides (+) 12V only when the ignition is turned on
or in the accessory position.
, Right Front (+) Speaker Output Lead (Grey)
- Right Rear (–) Speaker Output Lead (Violet/
Black)
6 Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power
antenna, if applicable.
7 Fuse Holder (20A)
. Right Rear (+) Speaker Output Lead (Violet)
/ Remote Control Interface Connector
To remote control interface box.
8 Battery Lead (Yellow)
: Ai-NET Cable (Included with CD Changer)
; Front Output RCA Connectors
RED is right and WHITE is left.
Connect this lead to the positive (+) post of the
vehicle's battery.
< Rear/Subwoofer Output RCA Connectors
RED is right and WHITE is left.
= DC/DC Converter
For the battery lead and battery connection
Use an extension battery lead (20A)(sold
separately) and connect it directly to the positive
(+) side of the vehicle's battery.
NOTES
• Do not install the converter at a location subjected to
water such as under the floor mat or air conditioner.
This may cause a malfunction.
• Do not bundle the DC/DC converter cable with other
audio cables. Doing so may induce noise into your
system.
9 ISO Power Supply Connector
! Ground Lead (Black)
Connect this lead to a good chassis ground on the
vehicle. Make sure the connection is made to bare
metal and is securely fastened using the sheet metal
screw provided.
• Keep the DC/DC converter away from the Antenna
cables and the rear side of the unit, otherwise noise
may be generated when receiving radio broadcast.
> RCA Extension Cable (Sold Separately)
" Ai-NET Connector
Connect this to the output or input connector of other
product (CD changer, Equalizer, etc.) equipped with
Ai-NET.
To prevent external noise from entering the audio system.
• Locate the unit and route the leads at least 10cm away from the car harness.
• Keep the battery power leads as far away from other leads as possible.
• Connect the ground lead securely to a bare metal spot (remove the coating if necessary) of the car chassis.
• If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries
various Alpine noise suppressors, contact them for further information.
• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
29
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|