Allied Telesis Network Router 86222 06 User Manual

Patch Release Note  
Patch 86222-06  
For Rapier Switches and AR800 Series  
Modular Switching Routers  
Introduction  
This patch release note lists the issues addressed and enhancements made in  
patch 86222-06 for Software Release 2.2.2 on existing models of Rapier L3  
managed switches and AR800 Series L3 modular switching routers. Patch file  
details are listed in Table 1.  
Table 1: Patch file details for Patch 86222-06.  
86s-222.rez  
Base Software Release File  
Patch Release Date  
30-Aug-2001  
86222-06.paz  
226776 bytes  
Compressed Patch File Name  
Compressed Patch File Size  
This release note should be read in conjunction with the following documents:  
I
Release Note: Software Release 2.2.2 for Rapier Switches, AR300 and  
AR700 Series Routers, and AR800 Series Modular Switching Routers  
(Document Number C613-10313-00 Rev A) available from  
I
I
Rapier Switch Documentation Set for Software Release 2.2.1 available on  
the Documentation and Tools CD-ROM packaged with your switch, or  
AR800 Series Modular Switching Router Documentation Set for Software  
Release 2.2.1 available on the Documentation and Tools CD-ROM  
packaged with your switching router, or from www.alliedtelesyn.co.nz/  
WARNING: Using a patch for a different model or software release may cause  
unpredictable results, including disruption to the network. Information in this  
release note is subject to change without notice and does not represent a  
commitment on the part of Allied Telesyn International. While every effort has  
been made to ensure that the information contained within this document and  
the features and changes described are accurate, Allied Telesyn International  
can not accept any type of liability for errors in, or omissions arising from the  
use of this information.  
Simply connecting the world  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Patch 86222-06 For Rapier Switches and AR800 Series Modular Switching Routers  
3
PCR: 01170  
Module: IPv6  
Network affecting: No  
A fatal error occurred if an IPv6 interface was deleted while packets were  
being transmitted. The number of current interfaces was not being updated  
correctly when a new IPv6 interface was added. As a result, after multiple  
additions and deletions, no more IPv6 interfaces could be added. These  
issues have been resolved.  
PCR: 01176  
Module: PKI  
Network affecting: No  
The CREATE CONFIG command now adds PKI certificates to the script in  
the same order that they were originally added to the certificate database.  
PCR: 01177  
Module: PKI  
Network affecting: No  
PKI certificates are now periodically checked (once per hour) to verify that  
they are still valid.  
PCR: 01178  
Module: IPSEC  
Network affecting: No  
IPCOMP SA’s which have the reserved CPI “3” are no longer deleted by  
ISAKMP delete messages.  
PCR: 01179  
Module: SWI  
Network affecting: No  
When a VLAN was created and then destroyed on the G6 or G6F, the  
VTABLE was corrupted. This has been fixed.  
PCR: 01181  
Module: DHCP  
Network affecting: No  
DHCP failed to send request messages when it was in a rebinding or  
renewing state. This issue has been resolved.  
PCR: 01185  
Module: SWI  
Network affecting: No  
In some extreme traffic conditions the switch could lock up, preventing  
switching of any traffic. This issue has been resolved.  
PCR: 01186  
Module: FIREWALL  
Network affecting: No  
When large numbers of sessions were being handled the firewall would  
become overly aggressive in restricting new sessions. The Active TCP Opens  
field in the output of the SHOW FIREWALL POLICY would show a very  
8
high number (42 × 10 ). This issue has been resolved.  
PCR: 01187  
Module: IPG  
Network affecting: No  
If the IGMP table was empty and a timeout was set, a fatal error occurred.  
This issue has been resolved.  
Patch 86222-06 for Software Release 2.2.2  
C613-10319-00 REV F  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Patch Release Note  
Features in 86222-04  
Patch file details for Patch 86222-04 are listed in Table 3.  
Table 3: Patch file details for Patch 86222-04.  
86s-222.rez  
Base Software Release File  
Patch Release Date  
24-Aug-2001  
86222-04.paz  
220220 bytes  
Compressed Patch File Name  
Compressed Patch File Size  
Patch 86222-04 includes all issues resolved and enhancements released in  
previous patches for Software Release 2.2.2, and the following enhancements:  
PCR: 01124  
Module: PKI  
Network affecting: No  
Message protection validation failures would occur intermittently. This  
issue has been resolved.  
PCR: 01136  
Module: ISAKMP  
Network affecting: No  
ISAKMP now interoperates with other vendor’s products in aggressive  
mode exchanges.  
PCR 01138  
Module: CORE, SWI  
Network affecting: No  
Support has been added for the 8624XL-80 switch with -48VDC power  
supply.  
PCR: 01152  
Module: FIREWALL  
Network affecting: No  
In a dual policy configuration, the firewall would lock up under load. The  
firewall would also mistakenly report SYN attacks. These issues have been  
resolved.  
PCR: 01159  
Module: PIM  
Network affecting: No  
The CREATE CONFIG command generated duplicate PIM interface  
configuration command lines. This issue has been resolved.  
PCR: 01162  
Module: PKI  
Network affecting: No  
Certificates containing GeneralisedTime with the year in YYYY format are  
now parsed correctly. The keyUsage field of certificates is now parsed  
correctly when only one byte has been specified. The CRL update time is now  
displayed correctly in hours. If the username and password parameters are  
present the location parameter must be present and appear before the  
username and password parameters.  
PCR: 01165  
Module: DHCP  
Network affecting: No  
The DHCP server now correctly allocates addresses to clients running  
Apple Open Transport 2.5.1 or 2.5.2.  
PCR: 01166  
Module: FIREWALL  
Network affecting: No  
Both public and private access could be configured on the same interface on  
a policy. This issue has been resolved.  
Patch 86222-06 for Software Release 2.2.2  
C613-10319-00 REV F  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Patch 86222-06 For Rapier Switches and AR800 Series Modular Switching Routers  
5
PCR: 01167  
Module: ENCO  
Network affecting: No  
RSA encryption is now periodically suspended to ensure other processes  
get some CPU time during large RSA calculations.  
PCR: 01169  
Module: ISAKMP  
Network affecting: No  
The CREATE ISAKMP command now checks that the key specified by the  
LOCALRSAKEY parameter actually exists in the ENCO module.  
PCR: 01171  
Module: ETH, TRIGGER  
Network affecting: No  
The INTERFACE parameter of the CREATE TRIGGER and SET TRIGGER  
commands now supports Ethernet interfaces. Ethernet interface events can  
now generate triggers.  
PCR: 01173  
Module: Telnet  
Network affecting: No  
The Telnet server’s listen port can now be configured to a number in the  
range 1 to 65535, excluding any ports already assigned as listen ports.  
PCR: 01174  
Module: Firewall  
Network affecting: No  
The CREATE CONFIG command sometimes generated scripts for rule  
commands with GBLIP=0.0.0.0 when this was not necessary. This issue has  
been resolved.  
Features in 86222-03  
Patch file details for Patch 86222-03 are listed in Table 4.  
Table 4: Patch file details for Patch 86222-03.  
86s-222.rez  
8-Aug-2001  
86222-03.paz  
205828 bytes  
Base Software Release File  
Patch Release Date  
Compressed Patch File Name  
Compressed Patch File Size  
Patch 86222-03 includes all issues resolved and enhancements released in  
previous patches for Software Release 2.2.2, and the following enhancements:  
PCR: 01112  
Module: IPG  
Network affecting: No  
DNS response packets with corrupt length fields were causing a fatal error.  
This issue has been resolved.  
PCR: 01139  
Module: IPG  
Network Affecting: No  
IP NAT caused a fatal error when an ARP wait timer timed out and tried to  
send a host unreachable message. This issue has been resolved.  
PCR: 01147  
Module: STT  
Network affecting: No  
The router was restarting after a “teardrop” attack on the STT listen port.  
This issue has been resolved.  
Patch 86222-06 for Software Release 2.2.2  
C613-10319-00 REV F  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6
Patch Release Note  
PCR: 01150  
Module: FIREWALL  
Network affecting: No  
The entry aging process now works correctly even when there are large  
numbers of firewall entries to be aged.  
PCR: 01153  
Module: IPG  
Network affecting: No  
The command SHOW IP DEBUG=n was entered, where n was one greater  
than the number of items in the IP debug queue resulted in a fatal error. This  
issue has been resolved.  
Features in 86222-02  
Patch file details for Patch 86222-02 are listed in Table 5.  
Table 5: Patch file details for Patch 86222-06.  
86s-222.rez  
26-Jul-2001  
86222-02.paz  
202564 bytes  
Base Software Release File  
Patch Release Date  
Compressed Patch File Name  
Compressed Patch File Size  
Patch 86222-02 includes all issues resolved and enhancements released in  
previous patches for Software Release 2.2.2, and the following enhancements:  
PCR: 01081  
Module: FIREWALL  
Network affecting: No  
When an interface on the firewall was configured with a global IP address  
of 0.0.0.0, outgoing packets from the private interface to the public interface  
sometimes caused a fatal error. This issue has been resolved.  
PCR: 01126  
Module: PKI  
Network affecting: No  
Re-validation of temporary CA certificates now works correctly.  
PCR: 01128  
Module: IPG  
Network affecting: No  
A fatal error occurred when IGMP received a Join message and attempted  
to forward the Join message to other switch ports. This issue has been  
resolved.  
PCR: 01131  
Module: CORE  
Network affecting: No  
The SHOW CPU command sometimes displayed incorrect CPU utilisation  
figures. Typically a value of about 74% was reported when in fact the CPU  
was almost idle. This issue has been resolved.  
PCR: 01134  
Module: GUI  
Network affecting: No  
Port parameters can now be set correctly using the Layer 3 Switch GUI.  
PCR: 01135  
Module: GUI,INST  
Network affecting: No  
Clicking the Apply button on a Layer 3 Switch GUI page caused the switch  
to lock up if no configuration file was set, but boot.cfg was present. This  
issue has been resolved.  
Patch 86222-06 for Software Release 2.2.2  
C613-10319-00 REV F  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Patch 86222-06 For Rapier Switches and AR800 Series Modular Switching Routers  
7
PCR: 01137  
Module: IPG  
Network affecting: No  
A fatal error occurred when UDP received a packet with very long UDP  
packet length. This issue has been resolved.  
Features in 86222-01  
Patch file details for Patch 86222-01 are listed in Table 6.  
Table 6: Patch file details for Patch 86222-01.  
86s-222.rez  
11-Jul-2001  
86222-01.paz  
187124 bytes  
Base Software Release File  
Patch Release Date  
Compressed Patch File Name  
Compressed Patch File Size  
Patch 86222-01 includes the following enhancement for Software Release 2.2.2:  
PCR: 01100 Module: DHCP Network affecting: No  
The DHCP server identified the wrong port numbers for incoming DHCP  
requests causing DHCP replies to be sent to the wrong port. This issued has  
been resolved.  
PCR: 01102  
Module: IPG  
Network affecting: No  
The IP flow cache occasionally generated a watchdog fatal error. This issued  
has been resolved.  
PCR: 01102  
Module: SWI  
Network affecting: No  
Deleting entries from an L3 table occasionally resulted in a watchdog fatal  
error. This issued has been resolved.  
PCR: 01106  
Module: PKI  
Network affecting: No  
PKI enrolment no longer causes message validation to fail.  
PCR: 01119  
Module: IPV6  
Network affecting: No  
Repeated addition and deletion of an address with the VALID parameter set  
to or from an IPV6 interface caused a fatal error. This issue has been  
corrected. The VALID parameter specifies the life of the address, and  
defaults to INFINITE. The address is deleted when the lifetime expires. The  
PREF parameter specifies the time that the address is the preferred address  
of the interface, and defaults to INFINITE. PREF must be less than or equal  
to VALID. IPV6 now checks and ensures that if either PREF or VALID is  
specified, PREF is less than or equal to VALID. When an address is deleted  
the timers are now correctly cleared.  
PCR: 01120  
Module: IPG  
Network affecting: No  
IP sometimes passed the wrong port number to PIM, causing PIM to  
process the wrong port number in its routing table. This issued has been  
resolved.  
Patch 86222-06 for Software Release 2.2.2  
C613-10319-00 REV F  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
8
Patch Release Note  
Availability  
Patches can be downloaded from the Software Updates area of the Allied  
licence or password is not required to use a patch.  
Patch 86222-06 for Software Release 2.2.2  
C613-10319-00 REV F  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3Com Network Router MSR 30 User Manual
Agilent Technologies Satellite Radio E4406A User Manual
AG Neovo Flat Panel Television S 19A User Manual
Air King Fan 4TM63C 9420C User Manual
AKG Acoustics Headphones K240S User Manual
Amana Refrigerator ABR2222FES User Manual
AMX Stereo Receiver MAX CSD10 User Manual
Audiovox Automobile Alarm PRO 9649 User Manual
Behringer Mixer RX1202FX User Manual
Beko Microwave Oven D 6623 T User Manual