Allied Telesis Network Card AT WCP200G User Manual

PCI Adapter

AT-WCP200G

◆

User’s Guide

FOR WINDOWS 98/ME/XP/2000

VERSION 1.10

PN 613-50607-00 Rev A

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory Notes an d Statem en ts

Wireless LAN, Radio frequency electromagnetic energy is emitted from Wireless LAN

devices. The energy levels of these emissions however are far much less

than the electromagnetic energy emissions from wireless devices like for

example mobile phones. Wireless LAN devices are safe for use frequency

safety standards and recommendations. The use of Wireless LAN devices

Health an d

Auth orization

For Use

may be restricted in some situations or environments for example:

◆ On board of airplanes, or

◆ In an explosive environment, or

◆ In case the interference risk to other devices or services is

perceived or identified as harmful

In case the policy regarding the use of Wireless LAN devices in specific

organizations or environments (e.g. airports, hospitals, chemical/oil/gas

industrial plants, private buildings etc.) is not clear, please ask for

authorization to use these devices prior to operating the equipment.

Regulatory Installation and use of this Wireless LAN device must be in strict

accordance with the instructions included in the user documentation

provided with the product. Any changes or modifications made to this

In form ation /

Disclaim ers

device that are not expressly approved by the manufacturer may void

the userís authority to operate the equipment. The Manufacturer is not

responsible for any radio or television interference caused by

unauthorized modification of this device, of the substitution or

attachment. Manufacturer and its authorized resellers or distributors will

assume no liability for any damage or violation of government

regulations arising from failing to comply with these guidelines.

USA-FCC This device complies with Part 15 of FCC Rules.

(Federal

Com m un ication s

Operation is subject to the following two conditions:

1. This device may not cause interference, and

Com m ission )

Statem en t

2. This device must accept any interference, including interference

that may cause undesired operation of this device.

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory Notes and Statements

FCC Radio This Wireless LAN radio device has been evaluated under FCC Bulletin

OET 65 and found compliant to the requirements as set forth in CFR 47

Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure from

radio frequency devices.

Frequen cy

Exposure

Statem en t

The radiated output power of this Wireless LAN device is far below the

FCC radio frequency exposure limits. Nevertheless, this device shall be

used in such a manner that the potential for human contact during

normal operation is minimized.

When nearby persons has to be kept to ensure RF exposure compliance,

in order to comply with RF exposure limits established in the ANSI C95.1

standards, the distance between the antennas and the user should not

be less than 20 cm.

FCC This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful

interference in a residential installation.

In terferen ce

Statem en t

This equipment generates, uses, and can radiate radio frequency energy.

If not installed and used in accordance with the instructions, it may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try and correct the

interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the distance between the equipment and the receiver.

3. Connect the equipment to an outlet on a circuit different from that

to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

Export This product or software contains encryption code that may not be

exported or transferred from the US of Canada without an approved US

Department of Commerce export license.

restriction s

Safety In form ation

Your device contains a low power transmitter. When device is

transmitted it sends out radio frequency (RF) signal.

Download from Www.Somanuals.com. All Manuals Search And Download.

AT-WCP200G User’s Guide

Caution

To maintain compliance with FCC’s RF exposure guidelines, this

equipment should be installed and operated with minimum

distance 20cm between the radiator and your body. Use on the

supplied antenna. Unauthorized antenna, modification, or

attachments could damage the transmitter and may violate FCC

regulations.

CE Mark This is a Class B product. In a domestic environment, this product may

cause radio interference, in which case the user may be required to take

adequate measures.

Warn in g

Protection Requirem en ts for Health an d Safety - Article 3.1a

Testing for electric safety according to EN60950 has been conducted.

These are considered relevant and sufficient.

Protection Requirem en ts for Health an d Safety - Article 3.1b

Testing for electromagnetic compatibility according to EN301 489-1,

EN301 489-17 and EN55024 has been conducted. These are considered

relevant and sufficient.

Effective Use of th e Radio Spectrum - Article 3.2

Testing for radio test suites according to EN300 328-2 has been

conducted. These are considered relevant and sufficient.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Con ten ts

R e gulatory N o tes and S t atements ..............................................................................................................................................................3

Wir e l e ss L AN, H e a l t h and A u thorization F o r U s e ................................................................................................................................3

R e gu l atory I n f ormation/Disclaimers .......................................................................................................................................................3

USA-FCC (F e deral C o mmun i cations C o mm i ssion) Statement.......................................................................................................3

FCC R a d i o Fr e quency E x p osure S t atement ..........................................................................................................................................4

FCC I n terference S t atement .......................................................................................................................................................................4

Ex p ort restriction s ..........................................................................................................................................................................................4

CE M a rk W a rning ............................................................................................................................................................................................5

Preface ......................................................................................................................................................................................................................9

H o w T h i s G u i d e i s Organized ...........................................................................................................................................................................10

D o cument C o nventions ....................................................................................................................................................................................11

W h ere to F i n d R e l ated G u i d es .........................................................................................................................................................................12

C o ntact i n g A lli e d T e l e syn .................................................................................................................................................................................13

Online Suppor t ..............................................................................................................................................................................................13

E -mail and T e l e phone S u pport ...............................................................................................................................................................13

R e turning Products......................................................................................................................................................................................13

F o r S a les or C o rporate I n f ormation .......................................................................................................................................................13

O b ta i n i n g M a nagement S o f t ware U p dates .......................................................................................................................................13

T e l l Us W h at Y o u T h i n k...............................................................................................................................................................................13

Alli e d T e lesyn A T-WCP 2 00G P C I A d apter ..............................................................................................................................................15

I n troduction ...........................................................................................................................................................................................................15

U n packing and S e tup .........................................................................................................................................................................................16

U n packin g .......................................................................................................................................................................................................16

H a rdware I n stallation .........................................................................................................................................................................................17

LE D .....................................................................................................................................................................................................................17

C h ecking the I n stallatio n ...........................................................................................................................................................................17

S o ftware I n stallation ...........................................................................................................................................................................................18

I n stalling the A T -WCP200G Driver .........................................................................................................................................................18

I n stalling the W IRELESS LAN U t i li t y .......................................................................................................................................................21

Wir e l e ss U t i li t y S e tt i n g ................................................................................................................................................................................26

T e chnical Specifications ....................................................................................................................................................................................36

R e gu l atory Domains ...........................................................................................................................................................................................38

Download from Www.Somanuals.com. All Manuals Search And Download.

Preface

This user’s guide contains instructions on how to use and install an Allied

Telesyn AT-WCP200G Wireless PCI Adapter.

Download from Www.Somanuals.com. All Manuals Search And Download.

Preface

How Th is Guide is Organ ized

This guide contains the following sections:

I n troduction, describes the AT-WCP200G adapter.

U n packing and Setup, helps you get started with the basic installation

of the AT-WCP200G adapter.

H a rdware I n stallation, describes the LEDs of the adapter.

S o ftware I n stallation, provides instructions on how to install the driver

and utility programs.

T e chnical Specifications, lists the technical (general, physical and

environmental) specifications of the AT-WCP200G adapter.

R e gulatory D o mains, lists the IEEE 802.11g channels.

Download from Www.Somanuals.com. All Manuals Search And Download.

AT-WCP200G User’s Guide

Docum en t Con ven tion s

This guide uses several conventions that you should become familiar

with before you begin to install the product.

Note

Notes provide additional information.

Warning

Warnings inform you that performing or omitting a specific action

may result in bodily injury.

Caution

Cautions inform you that performing or omitting a specific action

may result in equipment damage or loss of data.

Download from Www.Somanuals.com. All Manuals Search And Download.

Preface

Wh ere to Fin d Related Guides

The Allied Telesyn web site at www.alliedtelesyn.com offers you an easy

way to access the most recent documentation, software updates, and

technical information for all of our products. The documents provided

on our web site are available as PDF files.

Download from Www.Somanuals.com. All Manuals Search And Download.

AT-WCP200G User’s Guide

Con tactin g Allied Telesyn

This section provides Allied Telesyn contact information for technical

support as well as sales or corporate information.

On lin e Support You can request technical support online by accessing the Allied Telesyn

Knowledge Base from the following web site at

www.kb.alliedtelesyn.com. You can use the Knowledge Base to submit

questions to our technical support staff and review answers to

previously asked questions.

E-m ail an d For Technical Support via e-mail or telephone, refer to the “Support &

Services” section of the Allied Telesyn web site at

www.alliedtelesyn.com.

Teleph on e

Support

Return in g Products for return or repair must first be assigned a Return Materials

Authorization (RMA) number. A product sent to Allied Telesyn without a

RMA number will be returned to the sender at the sender’s expense.

Products

To obtain a RMA number, contact Allied Telesyn’s Technical Support at

our web site at www.alliedtelesyn.com

For Sales or

Corporate

In form ation

You can contact Allied Telesyn for sales or corporate information at our

web site at www.alliedtelesyn.com. To find the contact information for

your country, select “Contact Us” then “Worldwide Contacts”.

Obtain in g New releases of management software for our managed products can

be downloaded from either of the following Internet sites:

Man agem en t

Software

Updates

◆ Allied Telesyn web site: www.alliedtelesyn.com

◆ Allied Telesyn FTP server: ftp://ftp.alliedtelesyn.com

If you would prefer to download new software from the Allied Telesyn

FTP server from your workstation’s command prompt, you will need FTP

client software and you will be asked to log in to the server. Enter

‘anonymous’ as the user name and your e-mail address for the password.

Tell Us Wh at If you have any comments or suggestions on how we might improve this

or other Allied Telesyn documents, please fill out the General Enquiry

Form online. This form can be accessed by selecting “Contact Us” from

You Th in k

www.alliedtelesyn.com.

Download from Www.Somanuals.com. All Manuals Search And Download.

Allied Telesyn AT-WCP200G PCI

Adapter

In troduction

Congratulations on your purchase of this IEEE 802.11g AT-WCP200G

Wireless PCI Adapter. This manual helps to get familiar with the

AT-WCP200G adapter. This manual contains detailed instructions in

operation of this product. Please keep this manual for future reference.

With a AT-WCP200G adapter, a desktop computer or a station can

communicate with another computer wirelessly. Easy-to use utilities are

bundled with Wireless PCI Adapter for configuration, monitoring, and

diagnosis purposes.

AT-WCP200G adapter can wirelessly transmit and receive data,

minimizing the need for wired connections. With an AT-WCP200G

adapter, you can locate your desktop or station wherever you want

without wires and cables.

AT-WCP200G adapter provides users with an access to real-time

information anywhere in their organization. The mobility provides

productivity and service, which are not available under wired networks.

The AT-WCP200G adapter configuration is easy to change from peer-to-

peer networks, suitable for a small number of users, to full infrastructure

networks of thousands of users that allow roaming around a broad area.

Download from Www.Somanuals.com. All Manuals Search And Download.

Un packin g an d Setup

This section provides unpacking and setup information for the

AT-WCP200G adapter.

Un packin g Open the box of the AT-WCP200G adapter and carefully unpack it. The

box should contain the following items:

◆ One AT-WCP200G PCI Adapter

◆ One CD-ROM

◆ This user’s guide

If any item is found missing or damaged, please contact your local

reseller for replacement.

Download from Www.Somanuals.com. All Manuals Search And Download.

AT-WCP200G User’s Guide

Hardware In stallation

LED LNK/ACT (Link/Activity)

The LNK LED is green when the AT-WCP200G adapter is connected to a

network successfully. Otherwise the LNK LED blinks continuously while

the AT-WCP200G adapter is scanning the wireless devices or

transmitting data.

Ch eckin g th e 1. Shut-down the computer by unplugging the power cord and

remove the chassis cover.

In stallation

2. Insert the contact edge of the AT-WCP200G adapter into the

connector or any available PCI Bus Master Expansion slot.

3. Gently insert the card firmly into the PCI slot. Make sure the card is

securely seated.

4. Secure the card to the chassis with the bracket screw.

5. Replace the PC’s cover.

6. Turn the computer ON.

Refer to the next section to install the AT-WCP200G driver and

WIRELESS LAN utility.

Download from Www.Somanuals.com. All Manuals Search And Download.

Software In stallation

In stallin g th e For Win dows 98/ ME/ 2000/ XP

AT-WCP200G

1. Verify that the AT-WCP200G adapter is securely inserted into the PCI

Driver

slot and the WIRELESS LAN CD is in the CD-ROM drive. The operating

system will detect the AT-WCP200G adapter and the following

window will appear.

2. Select Install the software automatically (Recommended) and

then Next.

Download from Www.Somanuals.com. All Manuals Search And Download.

AT-WCP200G User’s Guide

The installation process will scan the CD and prompt you to select

the appropriate driver for the operating system. For example, select

\driver\AT-WCP200G\Windows XPfor an XP operating

system.

3. Select Next.

Download from Www.Somanuals.com. All Manuals Search And Download.

The following screen will be displayed.

The AT-WCP200G drivers are not Microsoft WHQL certified,

therefore the below message will appear.

This is a generic Windows message indicating that the inserted

device has not completed the WHQL certification tests.

4. Select Continued Anyway.

Download from Www.Somanuals.com. All Manuals Search And Download.

AT-WCP200G User’s Guide

The following screen is displayed.

5. Select Finish to complete the AT-WCP200G driver Installation.

The AT-WCP200 driver is now installed.

Download from Www.Somanuals.com. All Manuals Search And Download.

In stallin g th e For Win dows 98/ ME/ 2000/ XP

WIRELESS LAN

This section provides the instructions on how to install and use the

WIRELESS LAN utility.

Utility

1. Insert the WIRELESS LAN CD into the CD-ROM Drive.

The WIRELESS LAN Main Menu, as shown below is displayed. If this

menu is not displayed, double-click on the My Computer icon, then

double-click on the CD-ROM Drive.

Download from Www.Somanuals.com. All Manuals Search And Download.

AT-WCP200G User’s Guide

2. Select Install Software. The menu below is displayed.

3. Select AT-WCP200G Wireless PCI Adapter. The following

InstallShield Wizard screen is displayed.

After the InstallShield Wizard is done preparing the installation, the

following screen is displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Select Next. The installation program will help you to setup the

Wireless PCI utility.

The following screen is displayed.

5. To accept the default destination folder, select Next. Otherwise

select Browse to change location and then select Next.

Download from Www.Somanuals.com. All Manuals Search And Download.

AT-WCP200G User’s Guide

6. In the Program Folders field, type in a new folder name or select an

existing folder from the list and then select Next.

The following screen is displayed.

When the Setup Status is complete, the screen shown below is

displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

7. Select the country domain from the pull-down menu and then OK.

Warning

Selecting the incorrect region mayresult in a violation ofapplication

laws. Make sure you select the correct domain.

8. Select Yes from the following warning prompt.

The following screen is displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

AT-WCP200G User’s Guide

9. Select Finish to complete installation.

The WIRELESS LAN utility is now installed.

10. When the WIRELESS LAN utility is launched, an icon is placed in the

System Tray, as shown below. To open the utility, right-click the icon

and select Open.

WIRELESS LAN Utility Icon

Wireless Utility With the AT-WCP200G adapter utility, users can configure all the

functions provided by the Wireless Monitor Utility. Double-click the

utility icon that appears in the task bar.

Settin g

The Wireless Monitor Utility includes the following tabs:

◆ Status

◆ Configuration

◆ Advanced

◆ Profile

◆ Network

◆ Statistics

◆ About

Download from Www.Somanuals.com. All Manuals Search And Download.

Status Tab

The Status tab shows the status of the AT-WCP200G adapter. It shows

where the device is connected, Network mode, Channel, Transmit Rate,

and Encryption Mode.

The other dialog box shows the Data Transmitted and Data Received.

The two signal lines show the Signal Strength and the Link Quality of the

device.

Download from Www.Somanuals.com. All Manuals Search And Download.

AT-WCP200G User’s Guide

Con figuration Tab

The Configuration tab allows you to configure Network and Security.

Under Network you can configure:

◆ Network Mode

Set Network Mode to “Infrastructure” when connecting to an

access point or set to “Ad-Hoc” if you have several stations and

want to set them as local network.

◆ Network SSID

The SSID differentiates one Wireless LAN group name from

another. All access points and all devices attempting to connect

to a specific Wireless LAN group name must use the same SSID. A

device will not be permitted to join the BSS unless it can provide

the unique SSID.

Download from Www.Somanuals.com. All Manuals Search And Download.

If the SSID parameter is “ANY,” it will detect the strongest signal of

the wireless station.

◆ Channel

It shows radio channel numbers that are used for Wireless LAN

networking.

The channel number can be set only under the Ad-Hoc operation

mode. In Ad-Hoc mode, each station must have the same channel

numbers and SSID.

In Infrastructure mode, the AT-WCP200G adapter will

automatically detect the channel number of the access point.

Under Security you can set:

◆ Network Encryption

This function is used to protect wireless communication from

eavesdropping. A secondary function of encryption is to prevent

unauthorized access to a wireless network, and it can be achieved

by using the Encryption function.

Check the Enable Encryption box to activate the security of the

PCI Adapter.

◆ Key 1 - 4:

You can type the key that you want to use from Key 1 to Key 4. The

key that you type will be the encryption between the station that

you are connected with.

If you select 64-bit in Hex format, you must type 10 values in the

following range (0 - F, hexadecimal), or 64-bit in ASCII format, you

must type 5 values in the following range (0 - 9, A - Z, and a - z

Alphanumeric).

If you select 128-bit in Hex format, you must type 26 values (0 - F,

hexadecimal), or 128-bit in ASCII format, you must type 13 values

in the following range (0 - 9, A - Z and a - z Alphanumeric).

If you select 256-bit in Hex format, you must type 58 values (0 - F,

hexadecimal), or 256-bit in ASCII format, you must type 29 values

in the following range (0 - 9, A - Z and a - z Alphanumeric).

Be sure that the PCI Adapter and the wireless station is set in the

same key.

◆ Create with Passphrase

The Passphrase helps you create a group of WEP key in the Key

Setting. If you input a phrase in the Create with Passphrase field,

the group of key setting will be changed.

Download from Www.Somanuals.com. All Manuals Search And Download.

AT-WCP200G User’s Guide

Note

After all the settings are completed, select Apply to save the setting.

Advan ced Tab

The Advanced tab allows you to control the AT-WCP200G adapter to

adjust with wireless devices in certain environment.

◆ Transmit Rate

You can choose one of the transmission rates as follows, 54 Mbps,

48 Mbps, 36 Mbps, 24 Mbps, 22 Mbps, 18 Mbps, 12 Mbps, 11

Mbps, 9 Mbps, 6 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps, Fully

Automatic, and Turbo Mode.

In some specific wireless devices, the transmit rate can define up

to 72 Mbps for 802.11g, select the Turbo Mode function to

enhance the transfer rate of the wireless connection.

The FullyAutomaticand Turbo Mode willautomaticallydetect the

suitable linking transfer rate and auto fall back when the signal is

not strong enough to transmit data.

Download from Www.Somanuals.com. All Manuals Search And Download.

◆ Power Saving

Select between OFF, Normal, or Maximum.

◆ Transmit Power

By selecting the Transmit Power, you can select the Radio

Frequency output power from Minimum, 12.5%, 25%, 50%,100%,

or Auto.

◆ Preamble Type

The usage of the preamble is to limit the packet size of the data to

transmit. It is recommended to choose the short preamble when

the link quality is bad. This is to prevent wasting time re-sending

a lost long packet. The Default is Auto which access short and long

preamble.

◆ Authentication Mode

Open System - with the same WEP key between the stations, the

stations does not need to be authenticated.

Shared Key - with the same WEP key between the stations in this

Authentication algorithm, this type will use packets with

encryption by transferring a challenge text which will be

acknowledge by both side of the stations. In order to choose

which authentication algorithm will be used, you must know

which one the station supports this algorithm first.

◆ Fragmentation Threshold

Fragmentation Threshold is a way of transmitting the packets that

will be fragmented. Choose a setting within a range of 256 to

2432. It is recommended to fragment the packet when the link

quality is bad, it is to prevent the wasting time of re-sending a

long packet that is lost.

◆ RTS/CTS Threshold

The RTS/CTS Threshold is a station initiates the process by

sending a RTS frame, the other ends receives the RTS and

responds with a CTS frame, the station must receive a CTS frame

before sending the data frame. This is to prevent the collisions by

each station. Choose a setting within a range of 256 to 2432. It is

recommended limiting a long packet to prevent each station

waiting too long to transmit a data.

Download from Www.Somanuals.com. All Manuals Search And Download.

AT-WCP200G User’s Guide

Profile Tab

The Profile tab allows you to set values for all parameters by selecting a

previously defined profile. Type a name in the Profile Name field to

create a profile, select Save and then Apply when a profile is done. You

can select Delete if the profile is no longer used. To activate another

profile, choose a profile name in the Profile Name field and select

Activate.

Download from Www.Somanuals.com. All Manuals Search And Download.

Network Tab

The Network tab shows all the wireless devices around your

AT-WCP200G adapter. The information of the wireless devices includes

SSID, MAC Address, Channels, Signal, WEP type, and Network Mode.

You can select the Rescan button to find the new wireless devices, and

double-click the device to choose the wireless station that you want to

connected to.

Download from Www.Somanuals.com. All Manuals Search And Download.

AT-WCP200G User’s Guide

Statistic Tab

The Statistic tab shows the real-time transmit and receive packets of the

PCI adapter.

Download from Www.Somanuals.com. All Manuals Search And Download.

About Tab

The About tab shows the Device Name, Regulatory Domain, Driver

Version, Firmware Version, MAC Address, and Utility Version.

Download from Www.Somanuals.com. All Manuals Search And Download.

AT-WCP200G User’s Guide

Tech n ical Specification s

General

Radio Technology

IEEE 802.11b Direct Sequence Spread

Spectrum (DSSS)

IEEE 802.11g Orthogonal Frequency Division

Multiplexing (OFDM)

Interface

PCI Type II specification 32bit data bus

Data Transfer Rate

1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps

(auto sense)

Receiver Sensitivity

Transmit Rate

54Mbps: Typical -72dBm @ 8% PER (Packet

Error Rate)

11Mbps: Typical -85dBm @ 8% PER (Packet

Error Rate)

802.11g: 13 dBm typically

802.11b: 17 dBm typically

Frequency Range

Modulation Schemes

Channels

2400 ~ 2497 MHz ISM band (channels 1 ~ 14)

DBPSK/DQPSK/CCK/OFDM

1-11 channels (FCC), 1-13 channels (ETSI),

1-14 channels (MKK-Japan), 10-13 channels

(France), 3-9 channels (Israel)

Media Access Protocol

Security

CSMA/CA with ACK

64/128/256-bits WEP Encryption, WPA

PWR (Power) and LNK (Link status)

Diagnostic LED

Antenna

Integrated Microstrip dual diversity

antennas

Physical and Environmental

Driver Support

Windows 98, Windows 2000, Windows ME,

Windows XP

Download from Www.Somanuals.com. All Manuals Search And Download.

Continuous Current

Consumption

480 mA typical for receive mode, 650 mA

typical for transmit mode

Temperature

Humidity

Operating: 0 ~ 40 C, Storage: -25 ~ 70 C

10% ~ 95% RH, no condensation

Dimensions

Certifications

118 mm x 54 mm x 7 mm (W x H x D)

FCC Part 15.247 for US, ETS 300 328 for

Europe

Download from Www.Somanuals.com. All Manuals Search And Download.

AT-WCP200G User’s Guide

Regulatory Dom ain s

This appendix lists the IEEE 802.11g channels supported by the world’s

regulatory domains.

Regulatory Domains

FCC (North

Channel

Identifier Frequency

802.11b

ETSI (Europe) France

Israel

MKK (Japan)

America)

2412

2417

2422

2427

2432

2437

2442

2447

2452

2457

2462

2467

2472

2484

Download from Www.Somanuals.com. All Manuals Search And Download.

Abocom Network Card CFE100 User Manual
Akai Electronic Keyboard MPK mini User Manual
Allied Telesis Network Card GE8 User Manual
Alpine Microphone CDE 9873 User Manual
Altinex Network Card TNP100AU User Manual
Aluratek Digital Photo Frame ADMPF007F User Manual
Azden Microphone 411DRH User Manual
BB Electronics Network Card 485 RF User Manual
Behringer Musical Instrument Amplifier BB115 User Manual
Behringer Speaker B2031 User Manual