Operator's manual
/
LCD-TV DVD Combi
ALD1570
(ES)
Manual de Instrucciones
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Table of Contents
Specifications
1
Inital Settings(DVD)
19-20
21
2
3
4
Troubleshooting Tips
The Causes of interference
Installation
22
Important Safety Instruction
Warnings and Cautions
Setup
5-7
8
Functional Parts(TV)
Functional Parts(DVD)
Side view of TV set
9
10
11
Remote Control unit
12-13
TELETEXT Operations
Remote Control Operation(DVD)
14
15-16
17-18
MENU Screens
1
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
,
B/G, D/K, I, L/L,M
Receiving System:
Colour System:
PAL/NTSC/SECAM
391mm(15.4 inch) diagonal
LCD Panel:
Ext.Antenna:
Ext. In/Out:
75 Ohm Coaxial Cable
SCART,PC Input,Earphone
Speaker:
8 Ohm
2Wx 2
Audio Output:
Power consumption:
Dimension:
AC 110-240V 50/60Hz,50W
W392 xD155.8 xH317(mm)
Net Weight:
2.8KG
Note:Design and specifications are subject to change without prior notice.
OPEN/CLOSE
POWER
P.P
REMOTE CONTROL
Q.
VIEW
-/--
SWAP
Transmitting System :Infrared
REPEAT
MUTE
SOURCE
PROG+
Power Supply
:DC 3V
VOL-
MENU
PROG-
VOL+
ASPECT
REVEAL
SIZE
STOP
MIX
INDEX
ANGLE
TEXT
SLOW
SUB.PAGE
ZOOM
TITLE
DVD MENU
PROGRAM SUBTITLE
AUDIO
ENTER
DVD SETUP
GOTO
DISPLAY
2
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Thank you verymuch for yourpurchase of thisproduct, the mostnatural Colour TelevisionReceiver.
To enjoy yourset to thefull from thevery beginning, readthis manual carefullyand keep ithandy for ready
reference.
INSTALLATION
Locate the receiver in the room where direct light does not strike the screen.
Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is
recommended for comfortable viewing.
Allow enough spacebetween the receiver and the wallto permit ventilation.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature component
failure.
This TV operates on a DCsupply provided by the AC-DC adaptor. The voltage is as Indicated on the label
on the back cover.Only use the AC-DC adaptor supplied with the TVand never apply an AC mains to the TV
directly. The AC-DC adaptor operates on and AC mains supply, the voltage is as indicated on the labelof
the AC-DC adaptor. Connect the DC plug of theAC-DC adaptor to the DC 12V socket at the back of the TV.
Connect the AC-DC adaptor and its mains cord. Insert the mains plug in the wall socket having a mains
voltage of 110-240V.
Do not installthe receiver in a location near heat sources such as radiator, air ducts, direct sunlight ,or
in a place somewhere like close compartment and close area.
Do not coverthe ventilation openings when using theset.
CAUTION
Never tamper withany components insideyour set, orany other adjustmentcontrols not mentionedin
this manual. TheLCD panel usedin this productis made ofglass. Therefore,it canbreak When theproduct
is dropped orapplied with impact. Be careful notto be injuredby broken glasspieces in casethe LCD panel
breaks.When you cleanup dust orstick of awater drop onthe LCD panel. The power cordshould be pulled
out from theplug receptacle, thenwipe the receiverwith dried softcloth .During thunderand lighting ,
unplug the powercord and antennacord to preventyour TV setfrom damage. Alltelevision receivers are
high voltage instruments. All "inside work" on your receiver should be performed only by theTV service
personnel.
If some abnormalphenomena happens , may be youhave some mis-opertion,pleasetake off powerand
restart your TVset .
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTION
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lighting flash with arrow head within a triangle is intended to tell the user that
parts inside the product are a risk of electric shock to persons.
The exclamation point within a triangle is intended to tell the user that important
operating and servicing instructions are in the papers with the appliance.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE AND OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNINGS AND CAUTIONS
Caution
Do not drop or push objects into the television cabinet slots
or openings. Never spill any kind of liquid on the television
receiver.
Caution
Do not insertanything in theventilation holes. Ifmetal or
something flammable enters, it may resultin fire orelectric shock.
Caution
Do not place objects on this unit, it may damage the screen surface.
Caution
Do not squashpower supply cordunder the televisionreceiver.
Caution
Do not throwanything at theset. The screenglass may explode by
impact and causeserious injury.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNINGS AND CAUTIONS
Caution
Never stand on, lean on, or suddenly push the television or its
stand. You should pay special attention to children. Serious injury
may result if it should fall.
Caution
Do not placeyour television onan unstable cart, stand , shelf or
table. Serious injuryto an individual, and damage tothe television,
may result ifit should fall.
Caution
When the televisionreceiver is notused for anextended period of
time, it isadvisable to disconnectthe AC powercord from the AC
outlet .
Caution
Do not blockthe ventilation holesin the backcover.
Adequate ventilation isessential to preventfailure of electrical
component.
Warning
Avoid exposing the television receiver to direct sunlight and other
source of the heat. Do notstand the television receiver directly on
other produces which give off heat .E.g.video cassette players.
Audio amplifiers. Do not place naked flame sources, such as
lighted candle on the television. Do not expose the LCD screen
surface to the sun, it may damage the screen surface.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNINGS AND CAUTIONS
Warning
Take care not to connect many appliances to the same mains
socket as this could result in fire or electric shock.
Warning
High voltages are used in the operation of this television receiver.
Do not remove the cabinet back from your set. Refer servicing to
qualified service personnel.
Warning
To prevent fire or electrical shock hazard, Do not expose the
television receiver to rain or moisture.
Warning
For you own safety, Do not touch any part of the set, main lead or
aerial lead during lighting storms.
Caution
If the televisionis to bebuilt into aCompartment or similarly
enclosed, the minimumdistances must bemaintained.
Heat build-up canreduce the servicelife of yourtelevision, and can
also be dangerous.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
Remote Control Battery Installation
Requires two AAA batteries(supplied).
Procedure
1. Turn the remote control face down. Remove battery
cover by pressing down on the marking on the
cover and sliding it off in the direction indicated.
2. Install batteries matching(+) and(-) polarity signs.
3. Replace the battery cover by sliding in reverse until
the lock snaps.
Note: Incorrect installation can cause battery leakage
and corrosion that will damage the Remote
control.
Precautions
Replace batteries in pair.
Do not mix battery types(zinc carbon with
alkaline).
Do not recharge, heat, short-circuit,
disassemble, or burn batteries.
4.If you cause a staticdischarge when touching the
unit, and the unit failsto function, simply unplug
the unit from the ACoutlet, wait a few minutes,and
plug it back in. Theunit should return to normal
operation.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL PARTS(TV)
Front View of LCD Set
MENU SOURCE
V-
V+
P-
P+
1. LED indicator lamp
15 14 13 12 11 10
9
8
7
6
5
4
2. Remote Sensor
3. Standby Button
4. SOURCE Button
5. MENU Button
6. P+ Button
7. P- Button
8. V+Button
9. V- Button
10. Repeat
11. Next
12. Preview
¼
ò½
é
13. Play/Pause
14. Stop
15. Open/Close
1
3
2
To turn theTV power ON
Put the TV set on thecorrect place, then connect the DCplug of theAC-DC adaptor to the DC 12V socket
at the leftside of the TV set. Connect the adaptor main cord to the wall outlet ,thenthe LED indicator lamp
turns red and the TV setis at Standby/work Mode. At StandbyMode, if Standby Button is pressed
the power indicator will change to green. It takes a few seconds before the picture appears.
To turn theTV power OFF
Press the Standby Button to make the TV set in Standby Mode, then disconnect the power plug from the
wall outlet.
NOTE
If TV is the selected input without signal received and NO operation is performed for about 5 minutes
continuously, the TV set will enter standby mode. For any inputs other than TV, theTV set will not enter
standby mode automatically without users instruction. If you are not going touse this TV set for a long
time, switch off the set anddisconnect the power plug from the wall outlet.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL PARTS(DVD)
1. DVD Slot
Please press the" SOURCE" buttonin the remotecontrol to Switchthis LCD-TV Setto DVD status,
insert the diskto DVD slot, and the playerwill swallow itin.
Notes:
1.Do not attachany seal orlabel to eitherside (the labeledside or therecorded side) ofa disc.
2.Do not useirregularly shaped CDs(e.g., Heartshaped oroctagonal)since they mayresult in
malfunctions.
3.Some playback operationsof DVDs andVideo CDs maybe intentionally programmedby software
manufacturers. This unit plays DVDS and Video CDs according to disc content designed by the
software manufacturer, thereforesome playback featuresmay not beavailable or otherfunctions
may be added.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SIDE VIEW OF TV SET
DC IN 12V
HEADPHONE
PC IN
FULL-SCART
RF INPUT(ANT.)
ANT.
Full-
SCART
AUDIO
PCIN
VGA
DC IN 12V
NOTE
Precautions when connecting to other equipment
When using external equipment with this TV set, please read the instruction
manual of the external equipment.
Switch off all power supplies to the equipment and TV set before connection.
Always ensure that the input and output terminals are correctly connected.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL UNIT
1.POWER ON/STANDBY button
Press this button toswitch on the TVwhen at standby mode or
enter standby mode.
OPEN/CLOSE
POWER
1
3
2.MUTE button
Press this button tomute or restore sound.
P.P
P.P
3.P.P Button
Press this button toselect the desired picture mode:
NORMAL/SOFT/RICH/CUSTOM.
7
4
5
4.DISPLAY Button
Press this button todisplay the setting onthe screen.
Q.
VIEW
SWAP
-/--
5.SLEEP Button
Press this button toset the sleep timer, the order
shown below(minutes):
REPEAT
MUTE
0 - 15 - 30 - 45 - 60
SOURCE
When the preset lengthof time has passed, the TV set
enters standby mode.
2
PROG+
6
6.SOURCE Button
VOL-
MENU
PROG-
VOL+
Press ¡°SOURCE¡ button,there menu will be show on the right
top of the screen, press ¡°PROG+/-¡ to select the AV source,
and then press ¡°VOL+/-¡ to enter AV mode.
ASPECT
TV
PC
SCART
DVD
REVEAL
SIZE
STOP
MIX
INDEX
ANGLE
TEXT
SUB.PAGE
ZOOM
SLOW
TITLE
DVD MENU
PROGRAM SUBTITLE
AUDIO
7.DIGIT Button(0-9)
This TV allows youto select channels from0 to 255.
Press this button toselect one-digit,two digit or three -digital
channels input options.
ENTER
DVD SETUP
GOTO
DISPLAY
To select a one-digitchannel(e.g. Channel 8),press this ¡°-/--¡
button to change channelselection to ¡°-¡ on screen display
and press the ¡°8¡ button only.
To select a two-digitchannel(e.g. Channel 28),press this ¡°-/--¡
button to change channelselection to ¡°--¡ on screen display
and press¡°2¡ and ¡°8 ¡ buttons. To select athree-digit
channel (e.g. Channel 128),press this¡°-/--¡ button to change
channel selection to ¡°---¡ on screen display andpress¡°1¡ ,
¡°2¡ and ¡°8¡ buttons.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL UNIT
8.MENU Button
Press this button toenter the menu screensfor various option
al adjustable settings.
OPEN/CLOSE
POWER
9.PROG+/- Button
Press the program upbutton to select the programforwards.
Press the program Down buttonto select the program
Backwards.
P.P
10.VOL+/- Button
Press volume up/down buttonsto adjust sound level.
11.Q.VIEW Button
Press this button toreturn to the previouslyviewed program.
Q.
VIEW
SWAP
-/--
12
11
12.SWAP Button
You can adjust yourTV program list order, press this button,
the program swap menu will displayed, as shown below. E.g.
to swap channel 0 and 7, press ¡°SWAP¡ button, press
¡°PROG+/-¡ to choose .FROM and press VOL+/-¡ to set the
channel number as ¡°0¡ ,and as the sameway to set the TO
as¡°7¡ ,last to do choose the¡°SAVE¡ and press ¡°VOL+/-¡
to implement this fuction.
REPEAT
MUTE
SOURCE
PROG+
9
8
10
13
VOL-
MENU
PROG-
VOL+
10
ASPECT
FROM
TO
CH
CH
0
7
9
REVEAL
SIZE
STOP
MIX
SAVE
INDEX
ANGLE
TEXT
SUB.PAGE
ZOOM
SLOW
TITLE
DVD MENU
PROGRAM SUBTITLE
13.ASPECT:TO SELECT SCALER MODE<16:9 4:3 16:9
FS ZOOM PANORAMA>
AUDIO
ENTER
DVD SETUP
GOTO
DISPLAY
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TELETEXT OPERATIONS
For models with Teletext function only.
13.TEXT Button
Press this button toenter or exit theteletext mode.
OPEN/CLOSE
POWER
14.INDEX Button
Press the button togo to the indexpage.
P.P
15.REVEAL Button
Press this button toreveal the hidden informationfor
some Teletext pages(e.g. answersto puzzles or riddles).
Press again to hidethe information.
16.MIX Button
Press this button enter to mix mode.(For SUBTITLE or
NEWSFLASH page, please usemix mode).
Press this button againto exit.
Q.
VIEW
SWAP
-/--
17.SIZE Button
Press this button tochange the Teletext screendisplay
mode among the following:
- Upper half screenenlarged
- Lower half screenenlarged
- Normal screen state
REPEAT
MUTE
SOURCE
20
20
PROG+
18.STOP Button
Press this button tohold the Teletext page ondisplay to
prevent the page fromchanging. Press again to release the
hold state.
VOL-
MENU
PROG-
VOL+
ASPECT
19.SUB.PAGE
Press this button todisplay subpage.
20
18
17
20
REVEAL
SIZE
STOP
MIX
15
13
14
16
19
20.COLOUR Button
Press this button toaccess directly to the
corresponding pages displayed atthe lower part ofthe Teletext
screen.
INDEX
ANGLE
TEXT
SUB.PAGE
ZOOM
SLOW
TITLE
DVD MENU
PROGRAM SUBTITLE
AUDIO
ENTER
DVD SETUP
GOTO
DISPLAY
14
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL OPERATION(DVD)
2
DVD Mode:
OPEN/CLOSE
POWER
1.POWER
Press this buttonto switch televisionon or off.
1
2.OPEN/CLOSE Button
P.P
Press OPEN/CLOSE button to load disc on disc tray. Hold the
disc without touching either of its surfaces, position it with
the printed title side facing down, align it with the guides, and
place it in its proper position. In case of interactive DVDs with
playback control, a menu appears on the TV screen.
3.DVD MENU Button
If play some DVD discs, press this button back to root menu
screen.
Q.
VIEW
SWAP
-/--
10
11
4.PROGRAM Button
Place a trackon the program list.
Press PROGRAM button, then the ¡°PROGRAM¡ will
appear on TV screen now you can press¡°> ¡÷ ¨Œ¡
and¡°ENTER¡ button to select ¡°START¡ option and
enjoy the desired tracks.
REPEAT
MUTE
SOURCE
PROG+
5.SUBTITLE Button
VOL-
MENU
PROG-
VOL+
To press this button, you can change the subtitle language
from one selected to the initial settings to a different language,
if available.
ASPECT
6.DVD SETUP Button
You can enjoy picture frame forward by pressing this button.
REVEAL
SIZE
STOP
MIX
7.AUDIO Button
INDEX
ANGLE
TEXT
SUB.PAGE
ZOOM
To press thisbutton, you canchange the audiolanguage from
the one selectedat settings toa different language, if
available.
SLOW
TITLE
DVD MENU
PROGRAM SUBTITLE
5
4
3
6
AUDIO
8.GOTO Button
ENTER
Press this button to go todesired position. The player
provides 3 search mode When the above items are showed
on TV screen, you can input number to locate desire sector,
then press PLAY to commence play The number you input is
invalid if it is beyond the track's capcity.
7
DVD SETUP
GOTO
DISPLAY
9
8
9.DISPLAY Button
To display player OSD.
10.PREV/NEXT Button
Press these buttonto go tothe previous/next chapter(DVD).
11.FR/FF Button
These buttons allowskipping ahead/back at5-level speed.
Press ¡°PLAY¡ button to returnto normal playback.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL OPERATION(DVD)
DVD Mode:
OPEN/CLOSE
POWER
12.REPEAT Button
To press thisbutton you canrepeatedly play atitle(DVD) or all
tracks(CD) when¡°ALL ¡ appears on TVscreen, you can
repeatedly play achapter (DVD) ora single track(CD)when
¡°Repeat chapter¡ appears on TVscreen, you cancancel
repeat functions whenno¡°Repeat off¡ appears on TVscreen.
P.P
13.PLAY/PAUSE Button
Press this button to start playback. Press this button again to
pause playback.
Q.
VIEW
SWAP
-/--
14.STOP Button
When this buttonis pressed once, the unit recordsthe stop
ped point, fromwhere playback willresume (resume function)
if ¡°PLAY¡ is pressed afterwards. But ifSTOP button is
pressed again insteadof PLAY button, there will beno resume
function.
REPEAT
MUTE
14
12
13
SOURCE
15.TITLE button
DVD disc:
PROG+
Press TITLE button, then the DVD menu or titles available on the
disc will be displayed. Then you can use "
to select programs.
" and ENTER button
VOL-
MENU
PROG-
VOL+
16.ZOOM button
ASPECT
1.Press ZOOM during playback or still playback to activate the
Zoom function. The square frame appears briefly in the right
bottom of the picture.
2. Each press of the ZOOM button changes the TV screen in
the following sequence:
REVEAL
SIZE
STOP
MIX
INDEX
ANGLE
TEXT
SUB.PAGE
ZOOM
16
15
SLOW
TITLE
17
18
3. Use the
buttons to movethrough the zoomed picture.
DVD MENU
PROGRAM SUBTITLE
4. To resume normal playback, press ZOOM button until
screen becomes 1X.
AUDIO
Note:Zoom may notwork on someDVDs.
N
ENTER
17.ANGLE button
DVD SETUP
GOTO
DISPLAY
If the disccontains scenes recordedat different camera
angles, you canchange to adifferent camera angleduring
playback. Press ANGLErepeatedly during playbackto select a
desired angle. Notethat the numberof the currentangle
appears on screen.
Note:
N
The angle indicatorwill blink onthe TV screenduring
scenes recorded atdifferent angles asan indication that
angle switching ispossible.
18.SLOW Button
Press this button during playback to activate the slow function.
Each press on this button change the TV screen in the follow
sequence:1/2 - 1/4 - 1/8 - 1/16 normal play
16
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SCREENS
This TV allows youto adjust any settingfrom the menu screensusing ¡°MENU¡ ,¡°VOL+/-¡ and ¡°PROG+/-¡
buttons.
Press ¡°MENU¡ button to display themenu, press¡°PROG+/-¡ to change menu fromone to another, ¡°VOL+/-¡
to enter the chosen menu,press¡°PROG+/-¡ to select the item, and then press ¡°VOL+/-¡ to adjust each
item.
Press ¡°MENU¡ again to exit the menu mode.
PICTURE MENU
You can adjust thecontrast, brightness, tint(NTSC only)
colour,sharpness.
PICTURE
CONTRAST
COLOUR TEMP: NORMAL /WARM / COOL
PICTURE MODE: NORMAL /SOFT / RICH /CUSTOM
BRIGHTNESS
TINT
CH
COLOUR
SHARPNESS
COLOUR TEMP
COOL
PICTURE MODE
NORMAL
ADJUST
SELECT EXIT
SOUND MENU
Enter sound menu, youcan adjust VOLUME.
SOUND
VOLUME
CH
TUNE MENU
ADJUST
TUNE
SELECT
EXIT
NOTE: this function only works in TV mode
AUTO SCAN: Press¡°VOL+/-¡ to begin auto search
program, and press menuto exit auto search.
CHANNEL: The number isthe current channel, andyou
can also change channelfrom one to another.
AUTO SCAN
CHANNEL
1
COLOUR SYS. PAL/NTSC/SECAM (optional)
SOUND SYS. B/G,D/K,I,M,L,L¡¯(optional)
COLOUR SYS.
SOUND SYS.
SKIP
PAL
B/G
CH
SKIP: Set this itemon to skip thechannel which you are
watching.
MANUAL: To start searching untila program is
searched, or press¡°MENU¡ to exit.
Fine Tune: Frequency datacan be fine-tuned inupward
or downward by theVOL+/- buttons.
OFF
152.25MHz
MANUAL
152.25MHz
EXIT
FINE TUNE
ADJUST
SELECT
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SCREENS
SETUP MENU
BULE SCREEN: You canset background ON orOFF.
TXT LANGUAGE.
SETUP
BLUE SCREEN
TXT LANGUAGE
ASPECT
ON
You can choose thesupported teletext
fonts among AUTO,WEST,RUSSIAN,ARABIC andFARSI.
WEST
16:9
ASPECT: You can setthe picture display mode16:9,
4:3 ,ZOOM,and 16:9FS,PANORAMA.
CH
ADJUST
SELECT
EXIT
OSD
OSD MENU
You can choose thelanguage, adjust the H-position,
V-position, duration and halftone.
LANGUAGE
ENGLISH
HPOS
VPOS
CH
DURATION
HALF TONE
ADJUST
SELECT
EXIT
PC MENU(under PC modeonly)
You can adjust theCONTRAST, BRIGHTNESS
PC
CONTRAST
HPOS/VPOS Press the VOL+/- buttonsto adjust the
picture Horizontal and Verticalposition.
BRIGHTNESS
HPOS
CLOCK Press the VOL+/- tominimize any vertical barsor
stripes visible on thescreen background.
CH
VPOS
PHASE When necessary, adjust thepixel phase of the
picture to avoid pictureinterference.
CLOCK
PHASE
AUTO CONFIG To adjust the screen
position automatically. It willtake a few seconds and
during this process thescreen will be black.
AUTO CONFIG
ADJUST
SELECT
EXIT
NOTE:
If the set iscold ,there may bea small¡°flicker¡ when the set isswitched on. It isnormal, There is nothing
wrong with the set.
If possible, use theVESA 1024X768@60HZ video mode to obtain the bestimage quality for yourLCD monitor.
Under other resolutions somescaled or processed pictures may appear on the screen.
Some dot defects mayappear on the screen, like red, green orblue Spots, However,this willhave no impact or
effect on the monitorperformance.
Do not press theLCD screen with yourfinger for a longtime as it may incursome damage to thescreen.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
INITAL SETTINGS(DVD)
AUDIO SETUP PAGE
Dolby
COMMON PROCEDURES OF INITIAL SETTINGS
General
Audio
Video
Preference
Press DVD SETUP button to get the setup menu. Use
-- Speaker Setup Page --
direction buttons "
" to select the preferred item .
Downmix
Stereo
LT/RT
Stereo
After finishing settings, press DVD SETUP again to TV
display.
The following menu items can be changed:
GENERAL: selects the GENERAL PAGE menu.
AUDIO : selects the Audio menu.
Speaker Setup Page
This page is for setup speaker output.
DOLBY : selects the DOLBY DIGITAL SETUP menu.
PREFERENCE: selects the PREFERENCE PAGE menu.
DOWNMIX Stereo
LT/RT: 2ch output, main channel with surround.
STEREO: 2ch output, main right channel with right
surround; main left channel with left surround.
GENERAL SETUP PAGE
Dolby
General
Audio
Video
Preference
-- General Setup Page --
DOLBY DIGITALSETUP PAGE
TV display
Angle Mark
Osd Lang
Ps
Normal/Ps
On Normal/Lb
Off Wide 16:9
On
Eng
On
Dolby
General
Audio
Video
Preference
English
Screen Saver
-- Dolby Digital Setup --
Japanese
On
Off
Dual Mono
Dynamic
Stereo
FULL
3/4
L-Mono
R-Mono
Mix-Mono
Go To General Setup Page
1/2
1/4
OFF
The following menu items can be changed:
TV DISPLAY: selects the aspect ratio of the playback
picture.
Go To Dolby Digital Setup
The following menu items can be changed:
DUAL MONO: Reproduction mode, used only when the
input consists of two independent audio
channels(1/1 mode). Possible selections are:
STEREO: Reproduce both channels as is.
L-MONO: Reproduce the left channel only.
R-MONO: Reproduce the right channel only.
The default is STEREO.
NORMAL/PS: pan & scan display.
NORMAL/LB: letterbox display.
WIDE: widescreen display.
ANGLE MARK: viewing angles change option
(if available). See changing the angles on page 10.
SCREEN SAVER: this is to turn on/off screen saver.
DYNAMIC: Dynamic range compression.
VIDEO DIGITALSETUP PAGE
Dolby
General
Audio
Video
Preference
-- Video Setup Page --
Sharpness
Brightness
Contrast
Low
00
High
Medium
Low
00
Go To Video Setup Page
The following menu items can be changed:
Sharpness: sharpness value.
Brightness: brightness value.
Contrast: contrast value.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
INITAL SETTINGS(DVD)
NOTE:this only works if there's no DVD disc in the unit
PREFERENCE SETUP PAGE
Dolby
General
Audio
Video
Preference
-- Preference Page --
Audio
Eng
Eng
English
French
Subtitle
Disc Menu
English
Spanish
Chinese
Japanese
Korean
English
French
French
Spanish
Chinese
Japanese
Korean
Parental
Password
Default
Spanish
Chinese
Japanese
Korean
2 G
Change
3 Pg
Russian
4 Pg 13
Reset
Russian
5 Pgr
6 R
Russian
7 Nc17
8 Adult
Go To Preference Page
The following menu items can be changed:
AUDIO: Selects a language for audio(if available).
SUBTITLE: Selects a language for subtitles(if available).
DISC MENU: Selects a language for DISC menus (if available).
PARENTAL[DVD only]: This is to disable the playing of specified DVDs which are unsuitable for children. Some
DVDs are encoded with specific rating level. If the rating level of the disc is higher than that preset in the setup
operation, playback of the disc will be prohibited. After selecting one of the PARENTAL items the screen will
change to the PASSWORD page, and password is required , The factory initial setting is 1369.
PASSWORD: Selects the menu setup PASSWORD CHANGE PAGE.
PASSWORD CHANGE PAGE
PASSWORD CHANGE PAGE
OLD PASSWORD
[
XXXX ]
NEW PASSWORD
CONFIRM PASSWORD
[ YYYY ]
[ YYYY ]
OK
OLD PASSWORD: Enter the OLD password, (Factory setting is 1369), and the cursor will jump automatically to
NEW PASSWORD.
NEW PASSWORD: Enter the NEW password. Enter 4 digits from the remote control unit numeric buttons, and the
cursor will automatically jump to CONFIRM PASSWORD.
CONFIRM PASSWORD: Confirm the NEW password by entering it again. If the confirmation is incorrect, the cursor
will stay in this column. After entering, the correct new password again, the cursor will jump automatically to OK.
OK: When cursor is on this button, press ENTER key to confirm setting.
DEFAULT: Back to the factory setting.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING TIPS
Before calling forservice, you cancheck the followingitems on symptomsand solutions.
No picture:
Check other channel, maybe station problem.
Adjust the tuningcontrol.
Ensure that theinput setting isat TV state.
Ensure that theLCD is on.
Ensure that theequipment is connectedproperly.
No sound anddistorted sound:
Ensure that theinput settings forthe TV andsound are proper.
Adjust the tuningcontrol.
Probably local interference, such as anappliance.
Re-orient aerial(if indoortype).
Ensure that theequipment is connectedproperly.
No remote Control:
Check the batteryare installed withthe correct polarity.
Point the remotecontrol unit atthe remote controlsensor and operate.
Remove the obstaclesbetween the remotecontrol and theremote control sensor.
Operate the remotecontrol unit ata distance ofnot more than 8 meters fromthe remote controlsensor.
Troubleshooting tips(PC mode):
¡°NO SIGNAL¡ displayed
Check if thewire is connectedcorrectly.
¡°UNSUPPORTED¡ displayed
Check if theinput setting iscompatible to themonitor specification.
Check if thewire is connectedcorrectly.
Led lamp indicatoron but nopicture
Check the monitorsetting :contrast ,brightness.
Check if thewire is connectedcorrectly.
Some unusual spotson screen:
Some dot defectsmay appear onthe screen, likered, green orblue, Spots, However, this will haveno
impact or effecton the monitorperformance.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
THE CAUSES OF INTERFERENCE
Incorporated in yourTV receiver arethe most up-to-datedevices to eliminateinterference.Local radiation
however, can createdisturbances which visiblyaffect your picture. Proper installation, agood aerial are
your best safe-guardsagainst these disturbances.
RF INTERFERENCE
Moving ripples acrossthe screen arecaused by nearbytransmitting or receivingshort-wave radio
equipment.
DIATHERMY
Herringbone pattern andpartial picture losscan result fromthe operation ofdiathermy equipment froma
nearby doctor's surgery or hospital.
SNOW
Weak TV signalsfrom long distantstations result inan instead pictureand give theeffect of fallingsnow.
An antenna adjustmentor antenna amplifiermay be needed.
GHOST
Multiple image causedby TV signalsreflected back fromsurrounding buildings, hills, aircraft, ect. Is
minimized by correctaerial positioning.
CAR IGNITION
Nearby cars andelectrical motors cancause small streaksacross the pictureor make thepicture roll.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|