Airlink101 Switch AGSW2400 User Manual

Quick Installation Guide  
24-Port 10/100/1000Mbps  
Green Switch  
Model# AGSW2400  
Ver. 1A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Introduction  
Congratulations on your purchase of the 24-Port  
10/100/1000Mbps Green Switch! It is an easy-installed  
network switch which helps you to extend your network  
structure quickly and reliably.  
Purpose  
This Quick Installation Guide tells you how to install your  
Switch and how to connect it to your Ethernet network.  
Terms/Usage  
In this manual, the term “Switch” (first letter upper case)  
refers to your 24-Port 10/100/10000Mbps Green Switch,  
and “switch” (first letter lower case) refers to other Ethernet  
switches.  
1.1 Hardware Interface  
24-Port 10/100/1000Mbps auto-negotiation RJ45 Ports  
All ports support auto MDI/MDIX, no need to use  
cross-over cables  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.2 Panel  
1.2.1 Front Panel  
The front panel of the Switch consists of LED indicators, and  
24 10/100/1000Mbps ports. The figure below shows the front  
panel of the Switch.  
Figure 1-1 Front Panel view of the Switch  
10/100/1000Mbps Ports (Port 1~24): These ports support  
10/100/1000Mbps, and can operate in Half/Full Duplex  
transfer modes. These ports also support automatic  
MDI/MDI-X crossover detection, giving true “plug and  
play” capability.  
LED Indicators: Comprehensive LED indicators display  
the status of the switch and the network (see Section  
1.2.3).  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.2.2 Rear Panel  
Figure 1-2 Rear Panel view of the Switch  
AC Power Connector: Supports AC 100~240V, 50~60Hz.  
NOTICE:  
Do not cover or put anything on and surrounding the switch  
while the Switch is operating.  
1.2.3 LED indicators information  
The front panel LEDs provide instant status feedback and  
help monitoring and troubleshooting when needed.  
Figure 1-3 Front Panel view of the switch  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
POWER: Power Indicator  
Status  
LED  
Color  
Solid  
Blinking  
Off  
The Switch is  
power-on  
POWER  
Green  
N/A  
No power  
Port 1~24 10/100/1000Mbps Status LEDs  
Status  
LED  
Color  
Solid  
The  
Blinking  
Off  
respective  
port is  
The port is  
LINK/  
ACT  
successfully  
transmitting or  
Green  
connected to receiving data  
No link  
10/100M  
the  
at  
10/100Mbps  
Ethernet  
network  
10/100Mbps  
Status  
LED  
Color  
Solid  
The  
Blinking  
Off  
respective  
port is  
The port is  
LINK/  
ACT  
transmitting or  
Green  
connected to receiving data  
No link  
1000M  
the 1000Mbps  
Ethernet  
at above  
100Mbps  
network  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.3 Technical Specifications  
Standards  
IEEE 802.3 10BASE–T, IEEE 802.3u 100BASE–TX,  
IEEE802.3ab 1000BASE-T Gbit and IEEE 802.3x Flow  
Control  
Network Cables  
Ethernet (10Base-T): Cables: 2-pair UTP Cat. 3, 4, 5,  
Twisted Pair (UTP). Up to 100m  
Fast and Giga Ethernet (100/1000Base-T): 2-pair UTP  
Cat. 5, Twisted Pair (UTP). Up to 100m  
Ports  
24 x 10/100/1000Mbps Auto-Negotiation RJ45 Port  
Access Method  
CSMA/CD  
Transmission Method  
Store and Forward  
MAC Address Table  
16K  
Jumbo Frame  
9216-byte jumbo packet length forwarding at wire speed  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Data Transfer Rate**  
Ethernet: 10/20Mbps – Half/Full-Duplex  
Fast Ethernet: 100/200Mbps – Half/Full Duplex  
Giga Ethernet 1000/2000Mbps – Half/Full Duplex  
Physical and Environmental  
Power Input: 100~240V AC, 50~60Hz  
Operation Temperature: 0 °C ~ 40°C  
Storage Temperature: -20°C ~ 70°C  
Humidity: 5% ~ 90% RH, non-condensing  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Installing the Switch  
The site where you place the switch may greatly affect its  
performance. When installing, take the following into your  
consideration.  
2.1 Installation  
Follow the guidelines below to install the Switch:  
Install the Switch in a fairly cool and dry place. See the  
Technical Specifications for the acceptable temperature and  
humidity operating ranges. Install the Switch on a sturdy,  
level surface that can support its weight. Connect the power  
cord to the Switch and the power outlet. The distance is no  
more than 182cm.  
Leave at least 10cm (about 4 inches) of space at the front  
and rear of the Switch for ventilation.  
2.2 Desktop or Shelf Installation  
When installing the Switch on the desktop or shelf, please  
attach the rubber feet to the Switch. Peel off the protective  
paper on the pads and attach them on the bottom of the  
Switch (one at each corner).  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.3 Rack Installation  
The Switch is rack-mountable and can be installed on an EIA  
13-inch equipment rack. To do this, first install the mounting  
brackets on the Switch’s side panels (one on each side),  
secure them with the included screws, and then use the  
screws provided with the equipment rack to mount the  
Switch.  
2.4 Power on the Switch  
The Switch has a universal power supply ranging from 100V  
to 240V AC, 50 ~ 60Hz power source. The AC power  
connector is located at the rear of the unit. The switch’s  
power supply will adjust to the local power source  
automatically.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Connecting the Switch  
This section describes how to connect the Switch to your  
10/100/1000Mbps Ethernet network.  
3.1 Connection  
Your network device (i.e. computer, switch, IP Camera, VoIP)  
can be connected to any port of the Switch via a two-pair  
UTP Category 5 Cable. If the LED indicators do not light up  
after making a proper connection, check your network device,  
the cable, the Switch conditions and connections.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Technical Support  
Toll-Free: 1-888-746-3238*  
* Free Voice Technical Support is only available within the hardware warranty  
(1-Year Limited Warranty from the date of purchase). Customer is required to  
provide invoice as purchase evidence.  
**Network conditions and environmental factors as well as network overhead can  
lower actual data throughput rate.  
Copyright © 2011 AirLink101®. All rights reserved. AirLink101, the stylized  
AirLink101® logo, specific product designations, and all other words and logos  
that are identified as trademarks and/or service marks are, unless noted  
otherwise, the trademarks and service marks of AirLink101®. All other product or  
service names are the property of their respective holders. AirLink101 products  
are protected under numerous U.S. and foreign patents and pending applications,  
mask work rights, and copyrights.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  

ABC Office Laminator 35 EZload User Manual
AllTrade Air Compressor 835533 User Manual
Amerec Portable Generator 3K10 User Manual
Audiovox Car Stereo System ACD 27 User Manual
Audiovox Stereo System HDTVlp User Manual
Axis Communications Security Camera axis fixed dome network camera User Manual
Axor Plumbing Product 42036000 User Manual
Behringer Digital Camera BUC400 User Manual
Behringer Music Pedal VD1 User Manual
Beko Double Oven BDC 545 A User Manual