AeroGarden Greenhouse Kit 300291 User Manual

QueStionS?  
Call: 1-800-476-9669  
email: customerservice@aerogrow.com  
A S S E M B LY  
P L A N T I N G  
S TA R T I N G  
Simple Steps  
To Get Your  
Mini  
Up and Growing  
Quick Start Guide  
Add  
Nutrients  
Replace  
Grow Bulb  
Mini  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Quick Start Assembly  
(no tools required)  
Unpack Your  
AeroGarden Mini  
A
B
Insert Lamp Arm  
into Base  
Push  
Lamp Arm  
down until  
you hear  
aclick.”  
Grow Bulb (1)  
Lamp Hood  
(front view)  
View  
Door  
Lamp Arm  
(back view)  
Bowl  
(front view) (back view)  
Lamp Arm  
Base  
(back view)  
Add  
Nutrients  
Replace  
Grow Bulb  
D
Plug Lamp Cord  
into Lamp Hood  
Seed Kit  
Base (front view)  
C
Insert Grow Bulb  
into Lamp Hood  
Push Lamp Cord  
firmly into socket  
in Lamp hood.  
Push straight in.  
Lamp Cord  
Lamp Hood  
(bottom view)  
DO NOT TWIST BULB!  
Instructions Continued On Next Page  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Start Assembly  
(Continued)  
1
Insert Lamp Hood  
into Lamp Arm  
Set Bowl into Base  
E
F
Add  
Nutrients  
Replace  
Grow Bulb  
Center hands over  
Lamp Arm and push  
Lamp hood down  
until you hear a  
“click.”  
(front view)  
Check to be sure that Bowl  
(back view)  
is securely in place.  
H
Moving Your AeroGarden Mini  
G
Insert Air Hose  
Use one  
hand to  
grasp the  
Lamp Arm.  
Add  
Nutrients  
Replace  
Grow Bulb  
Gently slide your AeroGarden Mini toward  
the surface edge and place other hand  
under the Base.  
Insert Air hose from  
back of Base into Bowl  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Place Your Garden  
I
68o  
Note: Do not place beneath  
under-cabinet lights.  
Away from:  
Reach of children and pets  
Direct sources of heat (e.g., stove, furnace vents)  
Direct sources of cold air (e.g., window drafts, A/C vents)  
For Optimal Tending & Harvesting, Also Consider:  
Easy access to un-softened water  
Ease of harvesting  
Bright lights (on about 17 hrs/day)  
*Recommend using GFCI outlet where  
required by National Electrical Code (NEC).  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Planting Your Garden  
2
A
Add Water Using a Spouted Container  
FILL TO  
Fill to “Fill To here”  
HERE  
(located below the View Door)  
Lift  
view Door  
Amount of  
Water  
To Be Added:  
1.5 quarts or ...  
6 cups or ...  
1.4 liters  
Water Level Indicator will turn red  
when water needs to be added.  
Add  
Nutrients  
Replace  
Grow Bulb  
Use room temperature municipal tap, bottled or  
purified water. Do not use well or softened water.  
Plant Your Garden  
B
Insert Seed Pods into Grow Surface openings.  
Check to see that:  
• There is a Seed Pod or Plant Spacer in every opening.  
Seed Pod Labels are facing forward.  
Seed Pods are pressed firmly in place.  
Seed Pod  
Grow Surface  
Bio-Domes™  
Add  
Nutrients  
Replace  
Grow Bulb  
Seed Kit Tray  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
C Place Bio-Domes on Seed Pods  
Note: Do not remove Bio-Domes  
until seeds have sprouted.  
NEvER REMOvE SEED  
POD LABELS.  
Bio-Dome  
Place a Bio-Dome on each Seed Pod.  
Press Bio-Dome down until its rim  
almost touches Grow Surface.  
Add  
Nutrients  
Replace  
Grow Bulb  
D
Add Starting Nutrient Tablet and Record Planting Date  
Record Planting Date  
Record the date you planted  
your AeroGarden Mini  
on the front cover of  
the Tending &  
Harvesting Guide.  
Add 1 tablet from the  
“Starting Nutrients”  
bag directly into the Bowl.  
Add  
Nutrients  
Replace  
Grow Bulb  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Starting Your Garden  
3
Plug Cord in Wall Socket  
A
What will happen...  
1
Grow Bulb will come on.  
Look under Lamp Hood to check  
bulb is lit.  
If not, check to see if:  
Grow Bulb (light) is properly inserted  
into Lamp Hood. (See step1C)  
View  
Door  
Lamp Cord is plugged into Lamp  
Hood. (See step1D)  
You are getting power through the  
electrical outlet.  
Plug In  
2
Pump will turn on.  
Lift the View Door.You should see  
bubbles in the water as the pump  
cycles on and off.  
Add  
Nutrients  
Replace  
Grow Bulb  
Your Light Timer  
B
Your Light Timer is Set  
To Start Growing Your Plants...  
1
Starting Now!  
If You Would Like to  
Change the Time of Day  
Your Lights Go On...  
Add  
Nutrients  
Replace  
Grow Bulb  
2
See Page 8.  
Your lights will stay on for 17 hours and will  
shut off for 7 hours.  
Your lights will come on every day at the time  
you plugged in your AeroGarden Mini.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
enjoy it!  
Personalize Your Light Timer  
(optional)  
Your Built-In Light Timer  
have the light go on in the morning and off at night  
to match their own wake and sleep schedule.  
Your AeroGarden Mini has a built-in timer  
that automatically provides your plants with  
the optimal amount ofsunlight(17 hours)  
andnight(7 hours).  
*The exceptions to this are flowering and fruiting plants.  
They require a daily dark period in order to produce flowers.  
If your plants will receive any room light during the day  
(either natural or artificial) we recommend that you set  
your AeroGarden Mini lights to be on during the day.  
As long as your plants get this amount of  
light, it does not matter when the light is  
*
turned off. Many people find it convenient to  
If you would like to change the time of day your  
light will go ON…  
Decide what time of day you want the light to  
go ON.  
AT THAT TIME, unplug your AeroGarden Mini, and  
then plug it back in.  
Add  
Nutrients  
Replace  
Grow Bulb  
Now, each day, your AeroGarden Mini lights will automatically  
• Turn on at the time you plugged in your AeroGarden Mini  
• Remain on for 17 hours  
• Turn off for 7 hours  
You can reset your timer as often as you want.  
In case of power failure, your AeroGarden Mini  
If the reflection from your AeroGarden Mini light is  
has a backup system that stores your nutrient and  
grow bulb timer settings. You will need to manually  
reset the Off-On cycle for your light (see above) to  
return to your previously selected light setting.  
visible from your bedroom, you may want  
to set the light to go off about the time you usually  
go to bed, so as not to disturb your sleep.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Basic Reminders About Your AeroGarden  
The AeroGarden Mini Control Panel  
See Tending & Harvesting Guide for “Kit-Specific” information  
LIGHTS ON/OFF  
Use to occasionally override the built-in light timer. Once pushed, lights will stay off/on until the next time  
built-in light timer is set to go on/off.This will not affect the timing of your light cycle and occasional use  
of this feature will not harm your plants.  
Add  
Nutrients  
Replace  
Grow Bulb  
ADD NUTRIENTS  
REPLACE GROW BULB  
When theAdd Nutrientslight is red (every  
2 weeks):  
When theReplace Grow Bulblight is red (after  
180 days of use):  
Add 1 nutrient tablet and fill the Bowl  
with water up toFill To Here.”  
It is time to replace your Grow Bulb. Replace-  
ment bulbs can be ordered from our website  
1
1
PRESS AND HOLD theLightsbutton  
until theAdd Nutrientslight begins  
flashing (about 3 seconds).  
2
3
After replacing Grow Bulb, PRESS AND HOLD  
theLightsbutton until theReplace Grow  
Bulblight begins flashing (about 3 seconds).  
2
Release theLightsbutton, then  
IMMEDIATELY press and release the  
“Lightsbutton again to restart the timer.  
Release theLightsbutton, then IMMEDIATELY  
press and release theLightsbutton again to  
restart the timer.  
3
REMOVE  
BIO-DOMES  
WATER  
LEVEL LOW  
When plants appear  
through the hole in the  
Seed Pod Labels, remove  
Bio-Domes and discard  
or recycle. Do not  
When Water Level  
indicator is RED,  
add water toFill  
To Here.”  
remove label.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Raise Lamp Hood/Lamp Arm  
As plants grow, raise the Lamp Hood/Arm one notch at a time, keeping the plants about 1” from the  
lights. Be sure the Arm is set to the lowest position when you start your AeroGarden Mini.  
1
2
Unplug the AeroGarden Mini.  
Disconnect Air Hose from back of Bowl.  
Remove Bowl from Base.  
3
4
Raise Lamp Arm/Lamp Hood:  
• Hold Lamp Arm.  
• With other hand, support the  
Lamp Hood and use thumb to  
push in Locking Button.  
• Release Locking Button while  
pulling up on Lamp Arm.  
Locking Button will automatically  
click into next notch.  
5
6
Replace Bowl on Base.  
Insert Air Hose from back of Base  
into Bowl (see step 1-G).  
7
Plug in the AeroGarden Mini.  
Note: When lowering Lamp Hood,  
be sure to hold Lamp Arm to  
avoid crushing plants.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Need AdditioNAl Help?  
Call: 1-800-476-9669  
Mini  
email: customerservice@aerogrow.com  
© 2007 AeroGrow international, inc.  
300291 AA 9/4/07 Patents Pending  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Abbott Diabetes Care Blood Glucose Meter ART06986 User Manual
Acer Personal Computer POWER 8400 User Manual
Aiphone Intercom System CC 1M User Manual
AlphaShield Network Card FIREWALL User Manual
Alps Electric Stereo System TDGB2 Series User Manual
AMD Computer Hardware LX 600@07W User Manual
Ask Proxima Projector DP5900 User Manual
Atlona TV Cables AT HDMI40SR User Manual
Avital Remote Starter 4108L User Manual
Behringer Music Pedal SM200 User Manual