Quick Start
Guide
Simple Steps
To Get Your “Trellis-Ready”
Up and Growing
Congratulations
on your purchase of the aerogarden Deluxe!
With this upgraded AeroGarden you get all the features of the original AeroGarden,
enhanced with…
• “24-Hour Light” Setting – that lets you override the built-in light timer and decide
how much light your plants receive (see details on page 10).
• 24” Extendable Arm – which gives you the flexibility to grow tall plants, such as
full-size tomato plants and bell peppers.
• Enhanced Lamp Hood – with 3 Deluxe Grow Bulbs, providing more light than the
original Grow Bulbs, giving larger plants the light needed to grow and thrive.
• Deluxe Trellis System – lets you easily support heavy, fruit-filled branches on full-
size plants such as tomatoes, peppers and cucumbers.
• “Replace Grow Bulbs” Indicator – alerts you to replace Deluxe Grow Bulbs. With
this feature, you’ll be sure plants are always getting the right intensity and full
spectrum of light needed for optimal growth.
Date Code:
Model #s: 100733-BLK; 100733-WHT
input Voltage: 115V, 60Hz, 1.5a
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Assembly
1
Unpack Your AeroGarden Deluxe
A
Lamp Hood
(front view)
Lamp Arm
Base
Bowl
(front view)
(back view)
(front view)
Insert Lamp Arm into Base
B
Push
Master Gardener
Deluxe
Lamp Arm
down until
you hear
Lamp Arm
Deluxe Kit
(back view)
Grow Bulbs (3)
a “click.”
Trellis System Includes:
SET UP
INSTRUCTIONS:
Instructions
Base
Trellis Coil
Brackets (2)
Trellis
Coils (2)
(back view)
Attach Trellis Brackets to
Lamp Hood (optional*)
Insert Deluxe Grow
Bulbs into Lamp Hood
C
D
Hand tighten pre-mounted screws with
phillips head screwdriver. Do not over-tighten.
*Recommended for larger plants that need support,
such as tomatoes, peppers or cucumbers.
Can be added to AeroGarden Deluxe
after garden is growing.
Lamp Hood (bottom view)
Push straight in.
DO NOT TWIST BULBS!
remember to replace Grow Bulbs every 6 months.
2
instructions Continued on next Page
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Assembly
(continued)
1
Plug Lamp Cord
into Lamp Hood
Place Lamp Hood
on Lamp Arm
E
F
Push Lamp Cord
firmly into socket
in Lamp Hood.
Lamp
Cord
Center hands
over Lamp Arm
and push Lamp
Hood down until
you hear a “click.”
(back view)
G
H
Set Bowl into Base
Moving Your
AeroGarden Deluxe
Use one hand to
grasp Lamp Arm
.
(front view)
Gently slide AeroGarden
toward the surface edge and
Check to be sure that Bowl
place other hand under Base
.
is securely in place.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Place Your Garden
I
In: A 60-75°F
(16-24°C)
environment
(optimal)
Under: A space that
Near: A standard
electrical outlet, per
local regulations
allows 35” (89cm)
clearance for the full
height of raised lamp
68°F/20°C
On: A sturdy, water-
tolerant surface
(Metal surfaces may cause
noise due to vibration)
note: Do not place beneath
under-cabinet lights.
Away From
Reach of children and pets
Direct sources of heat (e.g., stove, furnace vents)
Direct sources of cold air (e.g., window drafts, A/C vents)
For Optimal Tending & Harvesting, Also Consider
Easy access to un-softened water
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Planting Your Garden
2
A
Add Water Using a Spouted Container
Use room temperature municipal tap, bottled or
purified water. Do not use well or softened water.
Lift
View Door
Fill to “Fill to Here”
Amount of
(located inside the Bowl)
Water To Be
Added:
3.5 quarts or...
3.2 liters
When additional water is needed, “Water Level Low” light on Control Panel will blink.
Add water to raise level up to “Fill To Here” inside Bowl.
It is okay to add water up to “Fill To Here” before “Water Level Low” light blinks.
Plant Your Garden
B
The AeroGarden Deluxe comes with a Master
gardener Deluxe Kit for planting three (3)
seasons of your own seeds.
Please refer to Master Gardener Deluxe Guide
for detailed planting instructions.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
™
Place Bio-Domes on Seed Pods
C
Place a Bio-Dome on
each Seed Pod.
Bio-Dome
note: Do not remove Bio-Domes until seeds
have sprouted. neVer reMoVe SEED
POD LABELS.
Press Bio-Dome down
until its rim almost
touches Grow Surface.
Add Starting Nutrient Tablets and Record Planting Date
D
Record Planting Date
We recommend that you record the date
Master Gardener Deluxe Seed Pods were
planted on a calendar or in a notebook.
Add 2 tablets from “Small” nutrient
bag directly into Bowl.
See "Add Nutrient" (Feed garden - Basic Feeding) on page 12
of this guide for additional feeding instructions.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting Your Garden
3
Plug Cord into Electrical Outlet
A
Plug in
What will happen...
1
2
A white light on Control Panel will illuminate.
view Door
Deluxe Grow Bulbs will come on.
Look under Lamp Hood to check that all 3 bulbs are lit.
If not, check to see if:
• Deluxe Grow Bulbs are properly inserted in Lamp Hood
(page 2, step1D).
• Lamp Cord is plugged into Lamp Hood (page 3, step 1E).
• You are getting power through the electrical outlet.
3
When Pump starts* it may make a gurgling noise for a moment.
Lift View Door. You should see water dripping from the bottom
of Seed Pods into the Bowl.
If not, check to see if:
• Lamp Arm is fully inserted into Base (page 2, step 1B).
• Bowl is firmly seated in Base (page 3, step 1G).
*Pump may take up to twelve hours to start.
note: You will hear water flowing until plant roots have grown to surface level of water
(a few weeks). Keeping water level in Bowl up to “Fill to Here” will help reduce the
sound of dripping water.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Select Setting
B
Press the SELECT button until you reach the type of plants you are growing
(Tomatoes/Peppers, Salad Greens, etc.).
note: Depending on the plant type selected, your
aerogarden Deluxe pump will automatically
turn on and off at pre-programmed intervals.
Pump controls the flow of water through Seed
Pods to optimize plant growth.
Your Light Timer
C
Your Light Timer is Set To Start
1
2
Growing Your Plants...starting now!
IfYou Would Like to Change theTime
of Day Your Lights Will Go Off...
See “Personalize Your Light Timer” on page 9.
• Your lights will stay on for about 16 hours and will shut off for about 8 hours.*
• Your lights will come on every day at the time you plugged in your AeroGarden Deluxe.*
*except when using “24-Hour light” setting, which sets lights to be on for 24 hours.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalize Your Light Timer
(optional)
Your AeroGarden has lights and a built-in timer that automatically provide plants with the optimal amount of “sunlight”
(about 16 hours) and “night” (about 8 hours), depending on the plant type selected in the previous section.
*
As long as plants get this amount of light, it does not matter when lights are turned off. Many people find it conve-
nient to have lights go on in the morning and off at night to match their own wake and sleep schedule.
*the exceptions to this are Flower & Vegetable plants. they require a daily dark period in order to produce flowers. if your plants will receive any room
light during the day (natural or artificial), we recommend setting your aerogarden lights to be on during the day.
5 Simple Steps...
In order to make this as simple as possible, you only
need to set the time you want your AeroGarden
lights to go off (Off Time) and your built-in light
timer automatically sets the On Time...nothing
more for you to do.
Do the following to set the time you want your lights to go off:
1
2
Decide what time you want the lights to go OFF.
AT THAT TIME check that lights are on. If they are off, quickly press “Lights” button and
immediately release. (Lights must be on in order to reset timer.)
With lights on, press and hold “Lights” button until white light next to the plant type you
selected starts blinking – about 5 seconds.
3
Release the button.
4
5
When blinking stops (about 9 seconds), the lights will go off and your lights are now set to
go off at this time every day.
You can reset your timer as often as you want.
Lights Button
Blinking Light (if you selected Salad Greens)
in case of power failure, your aerogarden Deluxe has a backup system that stores light, nutrient & replace grow
bulbs timers as well as plant selection settings. When power is restored, your aerogarden will go back to the off-
on cycle you have set.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalize Your Light Timer
(continued)
AeroGarden Deluxe “24-Hour Light” Setting
note: “24-Hour light” setting is not recommended for Flower
or Vegetable plants – they require a daily dark period to produce
flowers.
The “24-Hour Light” setting allows you to override
the built-in light timer and keep lights on and pump
running 24 hours a day. You can also customize the
amount of light plants receive by manually turning
lights on and off using the “Lights” button, or setting
automatic on/off times, using a standard light timer.*
Accessing the “24-Hour Light” Setting
• Press and release “Select” until the white light next
to “24-Hour Light” is illuminated.
Use the “24-Hour Light” setting when growing plants
that thrive with continual light and moisture, such as
leafy greens and some herbs.
• To exit “24-Hour Light” setting, simply push the
“Select” button.
* not included. if you use a light timer to turn the lights on and
off, the nutrient timer and pump will stop whenever the lights
are oFF. Both will start up again when the lights turn back on.
the nutrient timer does not record the time elapsed when
lights are off. to ensure that plants are fed every 2 weeks, we rec-
ommend keeping track of your feeding schedule on a calendar.
For the more experienced gardener, the “24-Hour
Light” setting provides added flexibility when planting
a custom garden. You are no longer limited to the pre-
programmed light schedules associated with each plant
type (such as Tomatoes/Peppers, Salad Greens, etc.).
24-Hour Light
Select
once your aerogarden Deluxe is set on the “24-Hour light” setting, lights and pump will
remain on 24 hours a day. to shorten the amount of time lights are on, quickly press and re-
lease “lights” button, and lights will turn off. lights will automatically come back on within 12
hours – or, you can press and release “lights” button again, to turn lights back on.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Use trellis system
(optional)
Clip Trellis Coil on Bracket.
1
trellis Coil
lamp Hood
Bracket
trellis Coil
As your plants begin to produce fruit, you may find
they are starting to tip over or even break due to the
additional weight on branches.
When this occurs, support plants and bring them
back to the upright position by using your Trellis
System*.
*trellis Brackets must be attached to the lamp Hood in
order to use the trellis system (see Bracket attachment
instructions on page 2, step 1C).
Pull down Trellis Coil.
2
Wrap Strap around branch that
needs support and snap closed.
3
Gently push up on supported branch
until it is at desired height.
4
as a safety precaution, unplug aerogarden furnishing before performing this task. Be sure Grow Bulbs are cool to the touch
before attaching or adjusting Trellis Coil.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Reminders About Your AeroGarden
AeroGarden Deluxe Control Panel
• Lights On/Off
• Water Low
Use to occasionally override built-in light timer. Once pushed, lights
will stay off/on until the next time built-in light timer is set to go on/
off. This will not affect the timing of your light cycle and occasional
When light blinks add
water up to “Fill To Here.”
use of this feature will not harm your plants.
• 24-Hour Light
Illuminated white
light indicates the
AeroGarden Deluxe
is on “24-Hour Light”
• Add Nutrient
(Feed garden - Basic Feeding)
When “Add Nutrient” and “Water
• Replace Grow Bulbs*
When light blinks (after 6 months of use),
it is time to replace Deluxe Grow Bulbs.
Replacement bulbs can be ordered at
www.aerogardensupport.com or from your
retailer. After replacing Deluxe Grow Bulbs,
press “Reset” button to restart grow bulb
timer and turn off flashing light.
Low” lights start blinking (every
2 weeks), add 2 nutrient tablets*
and fill the Bowl with water up to
“Fill to Here.” Press and release
“Reset” button to restart nutrient
timer and turn off blinking lights.
setting.
*see tending & Harvesting guide for
plant-specific nutrient information.
note: if you store your aerogarden Deluxe between
uses, grow bulb timer automatically stops
when aerogarden Deluxe is unplugged.
*see complete replacement instructions on
next page.
• Remove Bio-Domes
When plants appear through hole in
Seed Pod Labels, remove Bio-Domes
and discard or recycle.
note: never remove Seed Pod Labels.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Reminders About Your AeroGarden (continued)
aerogarden Deluxe lamp arm & Hood Features
Raise lamp Hood (lights)
As plants grow to 1-2” from lights, raise Lamp Arm one notch at a time (each of the three Lamp Arm sections has
three notches). Be sure Lamp Arm is set at the lowest setting when you start your AeroGarden Deluxe.
1
2
3
Replace Bowl on Base and plug in
AeroGarden Deluxe.
Unplug AeroGarden Deluxe and remove Bowl
from Base.
Raise Lamp Arm/Lamp Hood:
• Hold Lamp Arm where it connects to Lamp Hood with
one hand. With other hand, push in Locking Lever.
• Release Locking Lever while pulling up on Lamp Arm.
• Locking Lever will automatically click into next
notch in the Lamp Arm section.
Push locking
lever in
Push locking
lever in
Push locking
lever in
Push locking
lever in
replace grow Bulbs – order bulbs at www.aerogardensupport.com
When “Replace Grow Bulbs” light on Control Panel begins blinking
after 6 months of use…
• Unplug AeroGarden Deluxe.
• Remove old Grow Bulbs and carefully discard*.
iMPortant: To avoid burning, be sure Grow Bulbs are cool before handling.
• Insert new Grow Bulbs into Lamp Hood.
• Plug in AeroGarden Deluxe and press and release “Reset” button to
restart grow bulb timer.
Early grow Bulb Replacement
If you replace Grow Bulbs before “Replace Grow Bulbs” light illuminates, be
sure to restart grow bulb timer as follows:
• Press and hold “Lights” button until white light next to your selected plant
type starts blinking – about 5 seconds.
• Release “Lights” button. The plant type selected light will continue to blink
for about 9 seconds. While plant light is still blinking…
*Check with local recycling authorities for light
bulb recycling availability in your area.
• Quickly press and release “Reset” button. “Replace Grow Bulbs” light will
blink once and the plant selected light will stop blinking.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Prepare For Your Next Garden
Cleaning instructions for your aerogarden
Use only water and mild soap when cleaning your AeroGarden (except when Sanitizing - Step 7). Do not use
abrasive cleaners or run through the dishwasher.
When your garden has completed it’s growing cycle…
1
2
7
Sanitize AeroGarden.
• Fill Bowl ¾ full with water.
Unplug AeroGarden.
Grow
Surface
Carefully remove Bowl and Grow
Surface from Base and bring to
a sink. Set Base and Lamp Hood
aside.
NEVER SUBMERSE BASE AND
CONTROL PANEL IN WATER.
• Add ¼ cup (59ml) of chlorine
bleach.
• Replace Grow Surface on Bowl,
place Bowl on Base and plug in
AeroGarden for 1-2 minutes.
(Select Salad Greens on Control
Panel to be sure water is flowing.)
3
Remove Grow Surface from Bowl
and place on a counter near a
sink.
Plant
Growth
• Unplug AeroGarden and empty
bleach water from Bowl.
Seed
Pod
8
Empty contents of Bowl in sink.
Rinse AeroGarden.
• Refill Bowl with tap water and
replace on Base.
• Plug in and run AeroGarden
for 1-2 minutes. (Select Salad
Greens again.)
• Unplug AeroGarden, empty Bowl
and repeat this step (step 8) one
more time.
4
5
Remove Seed Pods and plants
from Grow Surface.
• Pull Seed Pods out of Grow
Surface openings.
• Throw away Seed Pods and
plant debris (plant growth and
roots). If you compost, plant
debris can be composted.
Roots
Pump
Stand
Pump
Filter
9
Towel dry the Bowl and Grow
Surface before putting them back
together and setting them back on
the Base.
6
Rinse and clean Grow Surface,
Pump Stand and Pump Filter.*
• Use a soft scrub brush to clean
tangled roots from underside of
Grow Surface and Pump Stand.
• Remove Pump Filter from
Pump Stand. Gently scrub
roots from Pump Filter.
10 If your Grow Bulbs have been in use
more than 6 months, they should be
replaced at this time (see page 12).
Your AeroGarden is now ready for
replanting.
• Place Pump Filter back into
Pump Stand.
After cleaning, there may still be a few roots
in your Grow Surface, Pump Stand or Pump
Filter. This will not affect the operation of
your AeroGarden.
* iMPortant note: We recommend replacing the Pump Filter after growing
two gardens. order Pump Filters from www.aerogardensupport.com or from
your retailer.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Prepare For Your Next Garden
(continued)
Replanting Your AeroGarden
If you have already grown a garden in your AeroGarden, please follow the instructions below to reset
the nutrient timer:
• Press and HOLD “Reset” button until red “Add Nutrient” light blinks (approximately 9 seconds).
• Release “Reset” button. “Add Nutrient” light will turn off.
• Your AeroGarden is now reset. (In some cases you may see other lights blink as well. This is nothing to worry about.)
note: these steps do not reset grow bulb timer.
Reset
Add Nutrient
Bundle cord when furnishing is not in use.
!
U.S. CAUTION
–
You are cautioned that any changes or modifications not expressly approved in this manual could void your
authority to operate this equipment.
note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are de-
signed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guar-
antee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or
relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected; or, Consult the dealer or an experienced radio/TV technician for help.
to reduce the risk of electric shock, this furnishing has a
CAUTION: TO PREvENT ELECTRIC SHOCK, MATCH
polarized plug (one blade is wider than the other). this
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
plug will fit in a polarized outlet only one way. if the plug
does not fit fully in the outlet, reverse the plug. if it still
ATTENTION: POUR ÉvITER UN CHOC ÉLECTRIQUE,
does not fit, contact a qualified electrician to install the
proper outlet. Do not change the plug in any way.
PRÉSENTER LA LAME LARGE À LA FENTE LARGE ET
POUSSER JUSQU’AU FOND
.
© 2007-2008 AeroGrow International, Inc., Boulder, CO U.S.A. U.S. Patents Pending
5/8/08
Download from Www.Somanuals.com. All Manuals Search And Download.
|