User Guide
Ruby eSATAp ExDrive
(REDESP, REDESPU3)
T E C H N O L O G I E S
Installing your HD to the
Ruby eSATAp ExDrive
Step 1
Separate the top from the bottom cover of
the drive enclosure by loosening the screw.
SATA Connector
HD
Step 2
Align the SATA connector in the
2.5” hard drive with the SATA
connector on the PCB.
Switch
PCB
Shock Absorbers
Step 3
Wrap the shock absorbers around
the hard drive and PCB.
Bottom of PCB
Step 4
Turn over the PCB and secure the hard
drive to the PCB with the mounting
screws that come with the kit.
v3.1.11
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Download from Www.Somanuals.com. All Manuals Search And Download.
|