Adaptec
Storage Manager
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
●
3
Adaptec Customer Support
If you have questions about installing or using your Adaptec product, check this
document first—you will find answers to most of your questions. If you need
further assistance, use the support options listed below. To expedite your service,
have your computer in front of you.
Technical Support Identification (TSID) Number
●
●
Before contacting Technical Support, you need your unique 12-digit TSID
number. The TSID number identifies your product and support status.
The TSID number is included on a white, bar-coded label, like this example:
●
Affix a copy of the TSID label to the CD jacket so that you don’t lose it.
North America
●
Visit our Web site at www.adaptec.com.
●
Search the Adaptec Support Knowledgebase (ASK) at ask.adaptec.com for
articles, troubleshooting tips, and frequently asked questions for your product.
●
For information about Adaptec’s support options, call +1 408-957-2550,
24 hours per day, 7 days per week. To speak with a Technical Support Specialist,
●
For Hardware products call +1 408-934-7274,
Monday to Friday, 3:00 A.M. to 5:00 P.M., Pacific Time.
●
For RAID and Fibre Channel products call +1 321-207-2000,
Monday to Friday, 3:00 A.M. to 5:00 P.M., Pacific Time.
●
●
For support via e-mail, submit your question at ask.adaptec.com.
You can order Adaptec products, including accessories and cables, by calling
+1 408-957-7274. Or, you can order cables online at www.adaptec.com/buy-cables.
Europe
●
Visit our Web site at www.adaptec-europe.com.
●
German: Call +49 89 43 66 55 22, Monday to Friday, 9:00 to 17:00, CET. For
support via e-mail, submit your question at ask-de.adaptec.com.
●
●
●
French: Call +49 89 43 66 55 33, Monday to Friday, 9:00 to 17:00, CET. For
support via e-mail, submit your question at ask-fr.adaptec.com.
English: Call +49 89 43 66 55 44, Monday to Friday, 9:00 to 17:00, GMT. For
support via e-mail, submit your question at ask.adaptec.com.
You can order Adaptec cables online at www.adaptec.com/buy-cables.
Japan
●
Visit our Web site at www.adaptec.co.jp.
●
Call +81 3 5308 6120, Monday–Friday, 9:00 A.M. to 12:00 P.M and 1:00 P.M. to
6:00 P.M.
Download from Www.Somanuals.com. All Manuals Search And Download.
●
4
Software License Agreement
PLEASE READ CAREFULLY: THE USE OF THIS SOFTWARE IS SUBJECT TO
THE SOFTWARE LICENSE TERMS OF ADAPTEC, INC. AND OTHER
LICENSORS WHOSE SOFTWARE MAY BE BUNDLED WITH THIS PRODUCT.
BY YOUR USE OF THE SOFTWARE INCLUDED WITH THIS PRODUCT YOU
AGREE TO THE LICENSE TERMS REQUIRED BY THE LICENSOR OF THAT
SOFTWARE, AS SET FORTH DURING THE INSTALLATION PROCESS. IF YOU
DO NOT AGREE TO THE LICENSE TERMS APPLICABLE TO THE SOFTWARE,
YOU MAY RETURN THE ENTIRE UNUSED PRODUCT FOR A FULL REFUND
.
In return for acquiring a license to use the Adaptec software (“Software”) and the
related documentation, you agree to the following terms and conditions:
1. License. This Agreement grants you, the Licensee, a license to:
●
Use the Software on a single computer system or on multiple workstations,
systems and servers which incorporate an Adaptec RAID controller and may
be accessed by multiple users from multiple locations. You may make as many
installations of the Software as needed, but must restrict such installation only
to systems, workstations or servers using an Adaptec RAID controller.
●
Make one copy of the Software in machine readable form solely for back-up
purposes provided you reproduce Adaptec’s copyright notice and any
proprietary legends.
2. Restrictions. You may not distribute copies of the Software to others. You may
not post or otherwise make available the Software, or any portion thereof, in any
form, on the Internet. You may not use the Software in a computer service
business, including in time sharing applications. The Software contains trade
secrets and, in order to protect them, you may not decompile, reverse engineer,
disassemble, or otherwise reduce the Software to a human-perceivable form.
YOU MAY NOT MODIFY, ADAPT, TRANSLATE, RENT, LEASE, LOAN,
RESELL FOR PROFIT, DISTRIBUTE, NETWORK OR CREATE DERIVATIVE
WORKS BASED UPON THE SOFTWARE OR ANY PART THEREOF.
3. Ownership of Software. As Licensee, you own the media upon which the software
is recorded or fixed, but Adaptec and its licensors retain title and ownership of the
Software recorded on the original media and all subsequent copies of the
Software, regardless of the form or media in which or on which the original and
other copies may exist. This license is not a sale of the Software or any copy
.
4. Confidentiality. You agree to maintain the Software in confidence and that you
will not disclose the Software to any third party without the express written
consent of Adaptec. You further agree to take all reasonable precautions to
preclude access of unauthorized persons to the Software.
5. Term. This license is effective until January 1, 2045, unless terminated earlier.
You may terminate the license at any time by destroying the Software (including
the related documentation) together with all copies or modifications in any
form. Adaptec will have the right to terminate our license immediately if you fail
to comply with any term or condition of this Agreement. Upon any termination,
including termination by you, you must destroy the Software (including the
related documentation), together with all copies or modifications in any form.
Download from Www.Somanuals.com. All Manuals Search And Download.
●
5
6. Special Terms Applicable to Databases. Where a database is included with the
Software, you acknowledge that it is licensed only in connection with the use of
the Software to perform disc creation, and that the database and all data derived
therefrom must be maintained in confidence in accordance with the provisions of
Section 4. This license does not grant you any rights to distribute or disclose such
database or data.
7. Limited Warranty. Adaptec and its Licensor warrant only that the media upon
which the Software is furnished will be free from defects in material or
workmanship under normal use and service for a period of thirty (30) days from
the date of delivery to you. ADAPTEC AND ITS LICENSORS DO NOT AND
CANNOT WARRANT THE PERFORMANCE OR RESULTS YOU MAY
OBTAIN BY USING THE SOFTWARE OR DOCUMENTATION. THE
FOREGOING STATES THE SOLE AND EXCLUSIVE REMEDIES ADAPTEC
AND ITS LICENSORS WILL PROVIDE FOR BREACH OF WARRANTY.
EXCEPT FOR THE FOREGOING LIMITED WARRANTY, ADAPTEC AND ITS
LICENSORS MAKE NO WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED, AS TO NON-INFRINGEMENT OF THIRD
PARTY RIGHTS, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Some states do not allow the exclusion of implied warranties or
limitations on how long an implied warranty may last, so the above limitations
may not apply to you. This warranty gives you specific legal rights and you may
also have other rights which vary from state to state.
8. The entire liability of Adaptec and its licensors, and your exclusive remedy for a
breach of this warranty, shall be:
●
The replacement of any media not meeting the above limited warranty which
is returned to Adaptec; or:
●
If Adaptec or its distributor is unable to deliver replacement media which is
free from defects in materials or workmanship, you may terminate this
Agreement by returning the Software and your money will be refunded.
9. Limitation of Liability. IN NO EVENT WILL ADAPTEC OR ITS LICENSORS BE
LIABLE TO YOU FOR ANY INCIDENTAL, CONSEQUENTIAL OR INDIRECT
DAMAGES, INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR LOSS OF
DATA, EVEN IF ADAPTEC OR A LICENSOR HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER
PARTY. Some states do not allow the exclusion or limitation of special,
incidental, or consequential damages, so the above limitation or exclusion may
not apply to you.
10. Export. You acknowledge that the laws and regulations of the United States and
other countries may restrict the export and re-export of the Software. You agree
that you will not export or re-export the Software or documentation in any form
in violation of applicable United States and foreign law.
11. Government Restricted Rights. The Software is subject to restricted rights as
follows. If the Software is acquired under the terms of a GSA contract: use,
reproduction or disclosure is subject to the restrictions set forth in the applicable
ADP Schedule contract. If the Software is acquired under the terms of a DoD or
Download from Www.Somanuals.com. All Manuals Search And Download.
●
6
civilian agency contract, use, duplication or disclosure by the Government is
subject to the restrictions of this Agreement in accordance with i C.F.R. 12.212 of
the Federal Acquisition Regulations and its successors and 49 C.F.R. 227.7202-1
of the DoD FAR Supplement and its successors.
12. General. You acknowledge that you have read this Agreement, understand it, and
that by using the Software you agree to be bound by its terms and conditions. You
further agree that it is the complete and exclusive statement of the agreement
between Adaptec and you, and supersedes any proposal or prior agreement, oral
or written, and any other communication between Adaptec and you relating to
the subject matter of this Agreement. No additional or any different terms will be
enforceable against Adaptec unless Adaptec gives its express consent, including an
express waiver of the terms of this Agreement, in writing signed by an officer of
Adaptec. You assume full responsibility for the use of the Software and agree to
use the Software legally and responsibly. This Agreement shall be governed by
California law, except as to copyright matters, which are covered by Federal law.
This Agreement is deemed entered into at Milpitas, California by both parties.
Should any provision of this Agreement be declared unenforceable in any
jurisdiction, then such provision shall be deemed severable from this Agreement
and shall not affect the remainder hereof. All rights in the Software not specifically
granted in this Agreement are reserved by Adaptec.
Should you have any questions concerning this Agreement, you may contact Adaptec
by writing to:
Adaptec, Inc.
Legal Department
691 South Milpitas Boulevard
Milpitas, California 95035.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Growing Your Storage Space with Adaptec Storage Manager ....19
3
Installing on Windows ..................................................................25
Before You Begin ....................................................................25
Installing Adaptec Storage Manager ......................................25
Completing a Silent Installation (Advanced)........................26
Installing on Linux.........................................................................28
Before You Begin ....................................................................28
Installing Adaptec Storage Manager ......................................28
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Understanding Permission Levels ................................................35
5
Using Physical Devices View.........................................................41
Using Logical Devices View ..........................................................42
Revealing More Disk Drive Information .....................................43
Checking System Status.................................................................45
Working in Adaptec Storage Manager .........................................46
About the Actions Menu ........................................................46
Getting Help...................................................................................46
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Partitioning and Formatting Your Logical Drives................50
7
Setting the Standard Unit of Measure ...................................66
Changing a System’s Agent Base Port Number ....................69
8
Running Adaptec Storage Manager from the CD
When to Choose Bootable-CD Mode ..........................................71
Bootable-CD Mode Limitations ............................................71
Getting Started in Bootable-CD Mode.........................................71
Running Adaptec Storage Manager from the CD........................72
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Working with Hot Spares..............................................................90
10 Protecting Your Data
Creating a Snapshot.......................................................................96
Snapshot Limitations..............................................................96
Creating a Snapshot with Backup ..........................................97
Creating a Snapshot Without Backup ...................................97
Deleting a Snapshot ................................................................97
Enabling Copyback........................................................................98
Download from Www.Somanuals.com. All Manuals Search And Download.
Disabling Email Notifications..............................................119
12 Managing Tasks
Monitoring Upcoming Tasks in the Task List ....................127
Checking Past Tasks and Events in the Event Log..............127
Modifying a Task .........................................................................129
What if a task misses its start time?......................................130
Deleting a Task.............................................................................130
Disabling the Task Manager........................................................131
Re-enabling the Task Manager ............................................131
Download from Www.Somanuals.com. All Manuals Search And Download.
14 Working with Display Groups
Viewing Controller Properties....................................................141
Disk Drive Failure in a RAID 0 Logical Drive.....................149
Multiple Failures in the Same Logical Drive .......................150
Removing a Failed Disk Drive’s Icon...................................150
Rebuilding Logical Drives ...........................................................151
Solving Notification Problems....................................................151
Creating an Archive File..............................................................152
Troubleshooting Adaptec Storage Manager...............................152
Download from Www.Somanuals.com. All Manuals Search And Download.
A
B
Schedule a task?.....................................................................158
Event notifications, email notifications, and event alerts? .159
C
Buttons and Icons At-a-Glance
Icons in the Physical Devices View.............................................161
Icons in the Logical Devices View...............................................161
Buttons in the Physical/Logical Devices Views..........................162
Buttons on the Main Window Tool Bar.....................................162
Download from Www.Somanuals.com. All Manuals Search And Download.
D
RAID 10 Logical Drives...............................................................167
RAID 5EE Logical Drives ............................................................169
RAID 50 Logical Drives...............................................................170
RAID 6 Logical Drives.................................................................171
RAID 60 Logical Drives...............................................................172
Selecting the Best RAID Level.....................................................173
Glossary
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Guide
1
This User’s Guide explains how to install and use Adaptec® Storage
Manager to build a storage space and manage your stored data, whether
you have a single RAID controller installed in a server or a complex
Storage Area Network (SAN) with multiple RAID controllers and
servers.
This Guide is written for advanced computer users who want to create a
storage space for their data. Advanced knowledge of storage networks is
not required, but you should be familiar with computer hardware, data
storage, and Redundant Array of Independent Disks (RAID)
technology.
If you are using Adaptec Storage Manager as part of a complex storage
system, such as a SAN, you should be familiar with network
administration terminology and tasks, have knowledge of Local Area
Network (LAN) and SAN technology, and be familiar with the input/
output (I/O) technology—such as Fibre Channel (FC) or Serial
Attached SCSI (SAS)—that you are using on your network.
Note: Because this Guide covers multiple Adaptec RAID products,
some of the features and functions described here may not be available
for your controller.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: About This Guide
●
15
Terminology Used in this Guide
Because this Guide provides information that can be used to manage
multiple Adaptec RAID products in a variety of configurations from
DAS to SAN, the generic term “storage space” is used to refer to the
controller(s) and disk drives being managed with Adaptec Storage
Manager.
For efficiency, the term “components” or “component” is used when
referring generically to the physical and virtual parts of your storage
space, such as systems, disk drives, controllers, and logical drives.
Many of the terms and concepts referred to in this Guide are known to
used:
● Controller (also known as adapter, HBA, board, or card)
● Disk drive (also known as hard disk, hard drive, or hard disk drive)
● Logical drive (also known as logical device)
Note: For more information, see Understanding RAID on page 163 and
the Glossary on page 174.
Download from Www.Somanuals.com. All Manuals Search And Download.
In this chapter...
About Adaptec Storage Manager ......................................................17
About the Adaptec Storage Manager Agent .....................................17
System Requirements.........................................................................18
Growing Your Storage Space with Adaptec Storage Manager .........19
Adding Enhanced Features................................................................21
Getting Started Checklist...................................................................23
This chapter describes Adaptec Storage Manager and the Adaptec
Storage Manager agent, explains the concept of a “storage space” and
provides a checklist of getting-started tasks.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2: Introduction to Adaptec Storage Manager
●
17
About Adaptec Storage Manager
Adaptec Storage Manager is a software application that helps you build
a storage space for your online data, using Adaptec RAID controllers
and disk drives.
With Adaptec Storage Manager, you can group disk drives into logical
drives and build in redundancy to protect your data and improve
system performance.
You can also use Adaptec Storage Manager to monitor and manage all
the controllers and disk drives in your storage space from a single
location.
About the Adaptec Storage Manager Agent
When Adaptec Storage Manager is installed on a computer, the Adaptec
Storage Manager agent is also installed automatically. The agent is like a
service that keeps your storage space running. It’s designed to run in the
background, without user intervention, and its job is to monitor and
manage system health, event notifications, tasks schedules, and other
completed successfully, and sounds an alarm when errors or failures
occur on that system.
The agent uses less memory than the full application. If your storage
space includes systems that won’t be connected to monitors (and
therefore won’t require the user interface described in this Guide), you
application (see page 33). You may want to do this if system resources
are limited, or if you want more system resources available for other
tasks.
You can manage and monitor systems running the agent only by
logging into them as remote systems (see page 61).
You can also customize the agent settings to suit your storage space
requirements (see page 67).
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2: Introduction to Adaptec Storage Manager
●
18
System Requirements
● PC-compatible computer with Intel Pentium, or equivalent,
processor
● At least 128 MB of RAM
● 20 MB of free drive space
● 16-bit SVGA color monitor with a resolution of at least 800 x 600
● CD drive
● One of these operating systems:
●
Microsoft® Windows® 2000—Server, Advanced Server,
Professional
●
●
●
●
Windows 2003 Server—Standard, Advanced
Windows XP—Home Edition, Professional
Red Hat® Linux—Professional, Enterprise, Advanced Server
SuSE Linux—Personal, Professional, Enterprise
Note: For the latest on Adaptec’s support of Linux, or to
download driver sources, visit www.adaptec.com.
●
Novell®—NetWare® 6.5
Note: Adaptec Storage Manager can also be used before an
operating system is installed. See page 70 for more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2: Introduction to Adaptec Storage Manager
●
19
Growing Your Storage Space with Adaptec
Storage Manager
As your requirements change, Adaptec Storage Manager grows with
your storage space as you add more controllers, more disk drives, more
logical drives, and more data protection.
A Simple Storage Space
The example below shows the sort of simple storage space that might be
appropriate in a home office or for a small business. This storage space
includes one RAID controller and two disk drives installed in a server.
For data protection, the disk drives have been used to build a RAID 1
logical drive.
Adaptec Storage Manager
RAID 1
Server
An Advanced Storage Space
The example below shows how you can grow your storage space to meet
the expanding requirements of your business. For data protection,
segments of space from each disk drive have been used to build two
RAID 5 logical drives. One logical drive stores all the customer
information and the other logical drive stores the business’s accounting,
payroll, and personnel information.
Adaptec Storage Manager
Server
RAID 5 RAID 5
Customer
Data
Internal
Data
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2: Introduction to Adaptec Storage Manager
●
20
Continuing to Grow Your Storage Space
As your needs change, Adaptec Storage Manager will help you grow
your storage space to include multiple controllers and disk drives in
multiple locations.
The Administrator of the storage space shown in the example below can
create and modify logical drives and monitor all the controllers and disk
drives in the storage space from a single workstation.
RAID 1
Server
Department 1
Data
Adaptec Storage Manager
Server
RAID 5 RAID 5
Department 2
Data
Department 3
Data
Customer
Data
RAID 50
Server
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2: Introduction to Adaptec Storage Manager
●
21
Adding Enhanced Features
improve performance by upgrading your Adaptec controller with extra
Manager.
a feature key (sold separately). Purchase a feature key to unlock these
features:
● Copyback (see page 98)
● Snapshots (see page 96)
● RAID 1E (see page 166)
● RAID 5EE (see page 169)
● RAID 6 (see page 171)
● RAID 60 (see page 172)
Locked features—features which are unavailable without a key—
have a padlock icon (shown at right) beside them, as shown in the
examples below. If you select a locked feature, you are reminded that a
key is required to unlock it.
To purchase a feature key, contact your Adaptec Reseller or refer to the
Adaptec Web site at www.adaptec.com.
To unlock the enhanced features with a feature key, see page 22.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2: Introduction to Adaptec Storage Manager
●
22
Unlocking the Enhanced Features
To unlock enhanced features with a feature key:
1 In the Enterprise View, right-click the controller you want, then
click Add feature key.
The Add Feature Key window opens.
2 Enter the feature key, then click OK.
3 Click OK to confirm.
The enhanced features are unlocked and are now ready for use.
Download from Www.Somanuals.com. All Manuals Search And Download.
●
Getting Started Checklist
This Guide provides five special Getting Started chapters to help you
install, start, and begin to use Adaptec Storage Manager.
● Step 1: Install Adaptec Storage Manager on every computer that will
be part of your storage space (see page 24).
● Step 2: Start Adaptec Storage Manager—or the Adaptec Storage
Manager agent only—on every computer in your storage space (see
page 30).
● Step 3: Explore the features of Adaptec Storage Manager (see page
39).
● Step 4: Build your storage space (see page 47).
● Step 5: Optional—Customize Adaptec Storage Manager and the
Adaptec Storage Manager agent (see page 60).
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting
Started
5
4
3
2
1
In this chapter...
Installing on Windows.......................................................................25
Installing on Linux.............................................................................28
Installing on NetWare........................................................................29
Adaptec Storage Manager must be installed on every computer that will
be part of your storage space.
To install Adaptec Storage Manager, follow the instructions for your
operating system:
Note: You need administrator or root privileges to install Adaptec
Storage Manager. For details on verifying privileges, refer to your
operating system documentation.
To use Adaptec Storage Manager to configure a RAID controller before
you install your operating system, see Running Adaptec Storage Manager
from the CD on page 70.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Installing Adaptec Storage Manager
●
25
Installing on Windows
This section describes how to install Adaptec Storage Manager on
computers running Windows. See System Requirements on page 18 for a
list of supported operating systems.
Note: Advanced users—To perform a silent installation, follow the
instructions on page 26.
Before You Begin
If a previous version of Adaptec Storage Manager is installed on your
computer, you must remove it before beginning this installation. To
uninstall Adaptec Storage Manager, use the Add/Remove Programs
option in your Windows Control Panel.
Installing Adaptec Storage Manager
1 Insert the Adaptec Storage Manager CD.
The Installation wizard opens automatically. (If it doesn’t open,
browse to the CD in Windows Explorer, then click Autorun.)
2 Follow the on-screen instructions to complete the installation.
unless you have a specific requirement for Adaptec Storage Manager
to work with SNMP gets and traps. (See page 153 for more
information.)
3 Repeat these steps to install Adaptec Storage Manager on every
Windows computer that will be part of your storage space.
4 Continue with Starting Adaptec Storage Manager on Windows on
page 31.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Installing Adaptec Storage Manager
●
26
Completing a Silent Installation (Advanced)
A silent installation uses command line parameters to complete an
installation without messages or user interaction.
To complete a silent installation:
1 Insert the Adaptec Storage Manager CD into your CD drive.
2 Open a command prompt window and change to the CD directory.
3 Install Adaptec Storage Manager using this command line string:
setup.exe / s / v“ / qn <OPTIONS>”
This table describes the command line options. Multiple features
can be separated with commas.
Option
Required Values
INSTALLDIR
Yes
\ “path to installation directory\ ”
The installation path must be enclosed in
escaped quotation marks.
For example:
INSTALLDIR=\ “C:\ Program Files\ Adaptec\
Adaptec Storage Manager\ ”
ADDLOCAL
No
● All—(Default) Installs all features.
● Manager—Installs Adaptec Storage
Manager.
● SNMPSupport—Installs SNMP support;
requires Manager feature. (See page 153 for
more information.)
● ASMReadme—Installs the Readme file and
Start menu shortcut.
● CLITools—Installs Command Line
Interface tools.
Note: Use commas to separate multiple
features.
REBOOT
No
● Force—(Default) Forces a reboot at the
end of the installation.
● Suppress—Suppresses a reboot unless files
were in use and could not be overwritten
during installation.
● ReallySuppress—Suppresses all reboots at
the end of the installation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Installing Adaptec Storage Manager
●
27
Example command strings:
●
Install all default features and default to reboot:
setup.exe / s / v“ / qn INSTALLDIR=\ “C:\ Program Files\ Adaptec\
Adaptec Storage Manager\ ””
●
Install Adaptec Storage Manager, Readme, and SNMP support,
and default to reboot:
setup.exe / s / v“ / qn INSTALLDIR=\ ”C:\ Program Files\ Adaptec\
Adaptec Storage Manager\ “ADDLOCAL=Manager,
SNMPSupport,ASMReadme”
4 After a minute or two, the silent installation should be complete and
the Adaptec Storage Manager icon should be accessible.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Installing Adaptec Storage Manager
●
28
Installing on Linux
This section describes how to install Adaptec Storage Manager on
computers running Linux. See System Requirements on page 18 for a list
of supported operating systems.
Adaptec Storage Manager includes the Java Runtime Environment (JRE).
Before You Begin
If a previous version of Adaptec Storage Manager is installed on your
computer, you must remove it before beginning this installation. Any
customization files you created with the previous version are saved and
used in the upgrade.
To remove Adaptec Storage Manager, type the rpm --erase StorMan
command.
Installing Adaptec Storage Manager
1 Insert the Adaptec Storage Manager CD.
2 Mount the Adaptec Storage Manager CD:
mount / dev/ cdrom / mnt/ cdrom
mount / dev/ cdrom / media/ cdrom
Red Hat
SuSE
3 Change to the cdrom directory:
cd / mnt/ cdrom/ linux/ manager
cd / media/ cdrom/ linux/ manager
Red Hat
SuSE
4 Extract the RPM package and install it:
rpm --install ./ StorMan*.rpm
5 Unmount the Adaptec Storage Manager CD:
umount / mnt/ cdrom
Red Hat
SuSE
umount / media/ cdrom
6 Repeat these steps to install Adaptec Storage Manager on every
Linux computer that will be part of your storage space.
7
Continue with Starting Adaptec Storage Manager on Linux on page 32.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Installing Adaptec Storage Manager
●
29
Installing on NetWare
This section describes how to install Adaptec Storage Manager on
computers running NetWare. See System Requirements on page 18 for a
list of supported operating systems.
Before You Begin
You need the latest Support Pack for your operating system so you can
run the supported Java Virtual Machine (JVM). You need JVM version
1.3 or later. To check your JVM version, load JVM, type JAVA -VERSION.
Note: For the latest updates from Novell, visit www.novell.com.
Installing Adaptec Storage Manager
1 Insert the Adaptec Storage Manager CD.
2 From the command prompt, type load cdrom and press Enter.
3 From the command prompt, type:
xx_yy_zz:\ netware\ manager\ install
where xx is the product CD, yy is the version number, and zz is the
release number. For example:
adptcd_v2_01
The installation program starts.
4 Follow the on-screen instructions to complete the installation.
5 Repeat these steps to install Adaptec Storage Manager on every
NetWare computer that will be part of your storage space.
6 Continue with Starting Adaptec Storage Manager on NetWare on
page 32.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting
Started
5
4
3
2
1
In this chapter...
Starting Adaptec Storage Manager on Windows .............................31
Starting Adaptec Storage Manager on Linux ...................................32
Starting Adaptec Storage Manager on NetWare...............................32
Understanding Permission Levels.....................................................35
Logging Out of Adaptec Storage Manager .......................................38
page 33.
Note: You need root privileges to run Adaptec Storage Manager.
To use Adaptec Storage Manager to configure a RAID controller before
you install your operating system, see Running Adaptec Storage Manager
from the CD on page 70.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Starting Adaptec Storage Manager
●
31
Starting Adaptec Storage Manager on
Windows
On systems running Windows, you can run Adaptec Storage Manager
as a stand-alone application (like a regular software application), or in a
browser window (such as Microsoft Internet Explorer).
Note: Normally, you only need to run Adaptec Storage Manager in a
browser window if you’re working on a computer that isn’t part of your
storage space (does not have a controller installed). If the computer
you’re working on is part of your storage space, run Adaptec Storage
Manager as a standalone application.
1 Click Start > Programs > Adaptec Storage Manager.
The Log In dialog box appears.
2 Enter the user name and password that you use to log on to your
system, then click Connect.
Note: Each user name has a permission level associated with it. See
Understanding Permission Levels on page 35 for more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Starting Adaptec Storage Manager
●
32
Starting Adaptec Storage Manager on Linux
1 Type the following command to change to the Adaptec Storage
Manager installation directory:
cd / usr/ StorMan
sh StorMan.sh
3 When the Log In dialog box appears (see page 31), enter the user
name and password that you use to log on to your system, then click
Connect.
Note: Each user name has a permission level associated with it. See
Understanding Permission Levels on page 35 for more information.
Starting Adaptec Storage Manager on
NetWare
To start Adaptec Storage Manager on the NetWare operating system,
type the LOAD RAIDMAN command.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Starting Adaptec Storage Manager
●
33
Starting the Adaptec Storage Manager Agent
Only
Agent on page 17.
To start the Adaptec Storage Manager agent only, follow the
instructions for your operating system:
● For Windows, see below.
● For Linux, see page 34.
● For NetWare, see page 34.
Starting the Agent on Windows
On systems running Windows, the Adaptec Storage Manager agent
starts automatically when the system is powered on.
To verify that the agent is running:
1 Open the Windows Control Panel.
2 Double-click Administrative Tools, then double-click Services.
3 In the list of services, check that the Adaptec Storage Manager agent
is installed and running. If it’s not, you can choose to restart it.
4 Manage and monitor the system by logging into it as a remote
system (see page 61).
The Adaptec Storage Manager agent’s default settings are suitable for
most storage spaces. To customize the settings for your specific
requirements, see page 67.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Starting Adaptec Storage Manager
●
34
Starting the Agent on Linux
On systems running Linux, the Adaptec Storage Manager agent starts
automatically when the system is powered on.
To verify that the agent is running:
1 Open a shell window.
3 If the agent is running, it’s listed as sh StorAgnt.sh.
4 Manage and monitor the system by logging into it as a remote
system (see page 61).
The Adaptec Storage Manager agent’s default settings are suitable for
most storage spaces. To customize the settings for your specific
requirements, see page 67.
Starting the Agent on NetWare
To start the agent:
2 Press Enter.
3 Manage and monitor the system by logging into it as a remote
system (see page 61).
The Adaptec Storage Manager agent’s default settings are suitable for
most storage spaces. To customize the settings for your specific
requirements, see page 67.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Starting Adaptec Storage Manager
●
35
Understanding Permission Levels
When you log in to Adaptec Storage Manager, your permission level is
identical to your operating system permission level. For example, if you
have Administrator permissions on your operating system, you also
have Administrator permissions in Adaptec Storage Manager.
Authentication on page 37.
This section describes the three different permission levels:
● Administrator (see below)
● User (see page 36)
● Guest (see page 36)
Administrator Level
Logging in as an Administrator allows you full access to manage and
modify the controllers, disk drives, and logical drives that are part of
your storage space.
To log in as an Administrator:
● Windows—Enter a valid user name and password for the
Administrator or Administrative User on the system. (The
Administrative User is any member of the local Administrators
group, which can, in a Domain configuration, include Domain
Administrators.)
● Linux—Enter root for the user name and enter the root password.
● Netware—See page 37.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Starting Adaptec Storage Manager
●
36
User Level
Logging in as a User partially restricts your access to the storage space,
as described in this Table.
Users can...
User’s can’t...
Rescan controllers
Create logical drives
Modify logical drives
Delete logical drives
Delete hot spares
Save activity logs
Verify disk drives (with and without fix)
Verify logical drives (with and without fix)
Identify disk drives and enclosures
Rebuild disk drives
Perform data migrations
Create hot spares
Access the same information as Guests (see
below)
To log in as a User, use your normal network user name and password.
Guest Level
Logging in as a Guest restricts your access to the storage space to “view-
only”.
You can see all local and remote systems and view their properties
windows, view event logs, save configuration files and support archives,
and browse the online Help.
You cannot make any changes to the storage space.
To log in as Guest, click Cancel on the Login window.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Starting Adaptec Storage Manager
●
37
Configuring NetWare User Authentication
This section describes two ways to configure NetWare user
authentication.
Out-of-box Authentication
● Administrative Access—Granted exclusively to the Admin user
account, which must be defined within the NetWare Bindery context
of the server running the Adaptec Storage Manager agent.
● User Access—Granted to all Bindery and NetWare Directory
Services (NDS) user accounts. For NDS users, the user account must
reside within the same tree as the server running the Adaptec
Storage Manager agent.
When logging into Adaptec Storage Manager, NDS users must
provide the fully distinguished account name.
NDS Authentication
NDS authentication is based on NDS group membership.
To set up NDS group membership:
1 Create and populate an NDS group for storage administration.
Note: The group must reside within the same NDS tree as the server
running the Adaptec Storage Manager agent.
2 Install Adaptec Storage Manager.
3 Restrict authentication to the new group by adding this entry to the
SYS:\ RAIDMAN\ RaidAgent.pps file:
agent.group.NetWareStorageAdmin=<fully distinguished group
name>
For example:
agent.group.NetWareStorageAdmin=.CN=StorageAdmins.O=Acme
4 Restart the server.
Limited user access is granted to all NDS user accounts.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Starting Adaptec Storage Manager
●
38
Logging Out of Adaptec Storage Manager
To log out of Adaptec Storage Manager:
1 In the Enterprise View, click on the local system.
2 In the menu bar, select Actions, then click Log out.
You are logged out of Adaptec Storage Manager.
Logging Back In
To log in to Adaptec Storage Manager:
1 In the Enterprise View, click on the local system.
2 In the menu bar, select Actions, then click Log in.
3 Enter your user name and password, then click Connect. (See
Understanding Permission Levels on page 35 for more information.)
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting
Started
5
4
3
2
1
In this chapter...
Navigating the Main Window...........................................................40
Using Enterprise View .......................................................................40
Using Physical Devices View .............................................................41
Using Logical Devices View...............................................................42
Revealing More Disk Drive Information ..........................................43
Checking System Status.....................................................................45
Working in Adaptec Storage Manager..............................................46
Getting Help.......................................................................................46
Before you build your storage space, familiarize yourself with the main
features of Adaptec Storage Manager and learn to navigate to the
information you need.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Exploring Adaptec Storage Manager
●
40
Navigating the Main Window
The main window of Adaptec Storage Manager has three main panels, or
views, in addition to the other features shown below.
Enterprise
View
Physical Devices
View
Logical Devices
View
Menu
Bar
Tool
Bar
Status Bar
Event Viewer
Resize the panels and scroll horizontally or vertically as required, to
view more or less information.
Using Enterprise View
The Enterprise View is an expandable tree that lists the local system (the
computer you’re working on) and any remote systems that you’re
logged in to. All the controllers on those systems are also listed in the
Enterprise View. (See Logging In to Remote Systems on page 61 for more
information about local and remote systems.)
Note: See Creating Display Groups on page 63 to learn how to group
related local and remote systems together in the Enterprise View.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Exploring Adaptec Storage Manager
●
41
When you select a component in the Enterprise View, the disk drives
and logical drives (“devices”) associated with it appear in the Physical
and Logical Devices Views, as shown below.
By selecting Controller 1
in the Enterprise View...
...the disk drives connected to Controller 1 and
the logical drives created with those disk
drives appear in the Physical and Logical
Devices Views.
You can perform most tasks by selecting a controller in the Enterprise
view and working with its associated devices in the Physical and Logical
Devices Views.
Using Physical Devices View
When you select a controller in the Enterprise View, information about
the physical disk drives connected to that controller appear in the
Physical Devices View.
Controller 2 is connected to...
...eight disk drives.
Disk drives designated as hot spares have plus signs (+) beside them:
● A blue plus sign (shown at right) means that the spare is
protecting at least one logical drive.
● A hot spare with a yellow plus sign (shown at right) may not
be large enough to protect the logical drive it’s assigned to, or
may not be assigned to a logical drive.
See Working with Hot Spares on page 90 for more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Exploring Adaptec Storage Manager
●
42
Hold your cursor over any disk drive to see its status, port number,
and maximum speed. You can also click the arrow, shown at right,
to see this same information for all the disk drives at the same time. To
disk drives are displayed, as described in Revealing More Disk Drive
Information on page 43.
A disk drive shaded in light blue is not part of any logical drive. A
disk drive shaded half light/half dark blue (as shown at right) has
some space allocated to a logical drive, and some space available.
To view the logical drives associated with a particular disk drive, see
Using Logical Devices View on page 42.
Using Logical Devices View
When you select a controller in the Enterprise View, information about
the logical drives and arrays associated with that controller appear in
the Logical Devices View. (A logical drive is a group of physical disk
drives that your operating system recognizes as a single drive. For more
information, see Understanding Logical Drives on page 74.)
Controller 2 is
connected to...
...eight disk drives...
...from which
two logical drives
have been created.
The RAID level of a logical drive is indicated by the number inside
the logical drive’s icon. For instance, the logical drive shown at
right has RAID 1. Logical drives protected by hot spares have plus signs
(+) beside them, as shown at right.
Hold your cursor over any logical drive to see its name, status, and
size. You can also click the arrow, shown at right, to view this same
information for all the logical drives at once.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Exploring Adaptec Storage Manager
●
43
Click on a logical drive to highlight the disk drives that comprise it in
the Physical Devices View.
Three disk drives (plus one hot spare) comprise the
selected RAID 5 logical drive.
You can also click on any disk drive to see which (if any) logical drive it
belongs to. A disk drive shaded in light blue is not part of any logical
drive.
Revealing More Disk Drive Information
You can reveal more information about your disk drives by using the
View buttons to change how they are displayed.
By default, disk drives are displayed in unexpanded Text Description
View, as shown below.
View buttons
Click the expand arrow to see basic disk drive information.
Text Description View
button
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Exploring Adaptec Storage Manager
●
44
Click the Full Size Capacity View button to see the size capacities of
your disk drives, as shown below.
Full Size Capacity
View button
Disk drives or segments of disk drives that are included in logical drives
are shaded brown.
Click the Relative Size Capacity View button to see the size capacities of
your disk drives relative to each other, as shown below.
Relative Size Capacity
View button
A full length bar is displayed for the largest disk drive. Proportionally
shorter bars are displayed for other disk drives.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Exploring Adaptec Storage Manager
●
45
Checking System Status
Adaptec Storage Manager includes an Event Viewer and a status bar for
at-a-glance system and event status information.
The status bar (shown below) provides at-a-glance information about a
selected controller.
The status icon indicates if a controller is in a normal
state or if a problem has been detected
The tree path displays the location of the selected object
within Adaptec Storage Manager
The Event Viewer (shown below) provides status information and
messages about activity (or events) occurring in your storage space.
Double-click any event to see more information in an easier-to-read
information.
Note: By default, all Warning- and Error-level events activate an audible
alarm. See Silencing and Testing the Audible Alarm on page 121 for more
information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Exploring Adaptec Storage Manager
●
46
Working in Adaptec Storage Manager
Adaptec Storage Manager provides multiple ways to work with its
menus and windows.
Most menu options are available by:
● Selecting items from the menu bar.
● Clicking buttons on the tool bar.
● Right-clicking on components in the main window. (Only tasks and
windows associated with a specific component are available on
right-click menus.)
For simplicity, the tasks in this Guide are explained mainly using menu
bar options.
About the Actions Menu
Most of the main tasks in Adaptec Storage Manager are part of the
Actions menu on the menu bar. Options on the Actions menu vary,
depending on which type of component is selected in the main window.
For instance, managed systems, disk drives, and hot spares each have
specialized Actions menus.
Getting Help
Adaptec Storage Manager online Help includes conceptual information,
glossary definitions, and descriptions of on-screen menus and items, in
addition to step-by-step instructions for completing tasks.
To open the online Help, click the Help button (shown at
right). Alternatively, press the F1 key, or in the menu bar select
Help, then click Search or Contents.
Press the Help button in a dialog box or wizard for help with that
specific dialog box, window, or procedure.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting
Started
5
4
3
2
1
In this chapter...
Selecting a Configuration Method....................................................48
Express Configuration: Building the Easy Way................................48
Custom Configuration (Advanced)..................................................51
RAID Controller Support..................................................................59
Managing Your Storage Space...........................................................59
Once you have logged in to Adaptec Storage Manager, you can begin to
build your storage space by creating logical drives. (For more
information, see Understanding Logical Drives on page 74.)
Note: You must be logged in as an Administrator to complete the tasks
described in this chapter.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Building Your Storage Space
●
48
Selecting a Configuration Method
Adaptec Storage Manager has a wizard to help you build (or configure)
logical drives, and offers two configuration methods to choose from,
depending on your needs:
● Express configuration (basic)—Automatically creates logical drives
by grouping together same-sized physical drives, and assigns RAID
levels based on the number of physical disk drives in the logical
drive.
Use the express method when you want to use all available disk drives
in the most efficient manner. For instructions, see page 48
.
● Custom configuration (advanced)—Helps you group disk drives,
set RAID levels, determine logical drive size, and configure advanced
settings manually.
Use the custom method when you want to create specific logical drives
with any or all available disk drives. For instructions, see page 51.
Express Configuration: Building the Easy Way
When you use express configuration, Adaptec Storage Manager
automatically creates logical drives by grouping together same-sized
physical disk drives, and assigns RAID levels based on the number of
physical disk drives in a logical drive:
RAID 5.
● A logical drive with two physical disk drives is assigned RAID 1.
● A logical drive with only a single physical disk drive becomes a
simple volume, which does not offer redundancy.
Note: To create a logical drive with any other RAID level, you must use
the custom method, as described on page 51. See Understanding RAID
on page 163 for more information about RAID levels.
By default, logical drive size is set by Adaptec Storage Manager and
automatically maximizes the capacity of the disk drives. However, you
can choose to specify a size for a logical drive, if required.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Building Your Storage Space
●
49
To build your storage space with the express method:
1 In the Enterprise View, select the controller you want.
2 On the toolbar, click Create.
3 When the wizard opens, select Express configuration..., then click
Next.
4 Review the information that is displayed.
In the example below, Adaptec Storage Manager has used three
equal-sized disk drives to automatically create one logical drive with
RAID 5 and a hot spare.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Building Your Storage Space
●
50
To specify a size for the logical drives, or to make other changes to
the configuration, click Modify logical devices. See Step 6 on page
53 for more information.
Note: Some operating systems have size limitations for logical
drives. Before you save the configuration, verify that the size of the
logical drive is appropriate for your operating system.
5 Click Apply, then click Yes.
Adaptec Storage Manager builds the logical drive(s). The
configuration is saved on the Adaptec controller and on the physical
drives.
6 Repeat Steps 1 to 5 for each controller on your system.
7 Continue with Partitioning and Formatting Your Logical Drives
below.
Partitioning and Formatting Your Logical Drives
The logical drives you create appear as physical disk drives on your
operating system. You must partition and format these logical drives
before you can use them to store data.
Note: Logical drives that have not been partitioned and formatted
cannot be used to store data.
Refer to your operating system documentation for more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Building Your Storage Space
●
51
Next Steps
If you have installed Adaptec RAID controllers on more than one
computer, to continue building your storage space:
Steps 1 to 7 to create logical drives.
●
From your local system (the computer you’re working on), log in to all
other computers in your storage space as remote systems (see page 61),
then repeat Steps 1 to 7 to create logical drives.
The maximum number of supported RAID controllers varies
depending on your operating system. See RAID Controller Support on
page 59 for more information.
To continue, see Managing Your Storage Space on page 59.
Custom Configuration (Advanced)
Custom configuration helps you build your storage space manually by
stepping you through the process of creating logical drives, setting
RAID levels, and configuring other settings.
To build your storage space with custom configuration:
1 In the Enterprise View, click the controller you want.
Note how many available disk drives are connected to the controller;
this information will be helpful as you create logical drives.
2 On the toolbar, click Create.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Building Your Storage Space
●
52
3 When the wizard opens, select Custom configuration..., then click
Next.
4 Select a RAID level.
The most common RAID levels are listed first; advanced RAID levels
are available by clicking Advanced settings.
Note: To build a RAID Volume, see page 56. See Understanding
RAID on page 163 for more information about RAID levels.
5 Click Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Building Your Storage Space
●
53
6 In the Physical Devices panel, select the disk drives you want to use
in the logical drive.
Adaptec Storage Manager prompts you to select the correct number
of disk drives, as shown below. By default, Adaptec Storage Manager
automatically sets the size of the logical drive and maximizes the
capacity of the disk drives you select. (To set a custom size for the
logical drive, see the second bullet below).
Number of disk drives required
●
●
To create a hot spare—Control-click on an available disk drive. A
plus sign (+) appears to indicate that the selected drive will be
To set a smaller logical drive size—Click Advanced Settings,
then enter a size for the logical drive in the Size GB box. Available
space will remain on the selected disk drives. (See page 74 for
more information.)
●
To modify other settings—Click Advanced Settings and
customize the settings as required. (See Fine-tuning Logical
Drives on page 78 for more information.)
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Building Your Storage Space
●
54
7 If you have no other available disk drives, skip to Step 9.
If you have available disk drives and want to create additional logical
drives, click Add logical device to open a new tab in the wizard.
Tab for second logical drive
8 Repeat Steps 4 to 7 for each logical drive that you want to create on
the controller.
9 Click Next, then review the logical drive settings.
The example below shows two logical drives with RAID 5 are ready
to be created.
To make changes, click Back.
Note: Some operating systems have size limitations for logical
drives. Before continuing, verify that the size of the logical drive is
appropriate for your operating system. For more information, refer
to your operating system documentation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Building Your Storage Space
10 Click Apply, then click Yes.
●
55
Adaptec Storage Manager builds the logical drive(s). The
configuration is saved on the Adaptec controller and on the physical
drives.
11 Repeat Steps 1 to 10 for each controller on your system.
information.
If your storage space comprises one or more Adaptec RAID controllers
on a single computer, building is complete. Continue with Managing
Your Storage Space on page 59.
If you have installed Adaptec RAID controllers on more than one
Including More Systems in Your Storage Space below.
Including More Systems in Your Storage Space
If you have installed Adaptec RAID controllers on more than one
computer, to continue building your storage space:
● From your local system, log in to all the other computers as remote
systems (see page 61), then repeat Steps 1 to 12 to continue building
your storage space.
Note: The maximum number of supported RAID controllers varies
depending on your operating system. See RAID Controller Support on
page 59 for more information.
When your storage space is complete, continue with Managing Your
Storage Space on page 59.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Building Your Storage Space
●
56
Building a RAID Volume
A RAID Volume comprises two or more logical drives connected end-
to-end. The logical drives in a RAID Volume:
● Must be built using disk drives connected to the same controller.
● May have equal or different capacities.
To build a RAID Volume:
1 Create two or more logical drives that meet the requirements listed
above, and wait for them to build and initialize. For instructions, see
Express Configuration: Building the Easy Way on page 48 or Custom
Configuration (Advanced) on page 51.
The example below shows two RAID 5 logical drives.
2 On the toolbar, click Create.
3 When the configuration wizard opens, select Custom
configuration..., then click Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Building Your Storage Space
●
57
4 Click Advanced settings, select RAID Volume, then click Next.
5 In the Logical Devices panel, select the logical drives you want to use
in the RAID Volume.
Adaptec Storage Manager prompts you to select the correct number
of logical drives, as shown below.
Number of disk drives required
6 Modify the Advanced Settings, if required. (See Fine-tuning Logical
Drives on page 78 for more information.)
7 Click Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Building Your Storage Space
8 Review the RAID Volume settings.
●
58
The example below shows one RAID Volume ready to be created.
To make changes, click Back.
9 Click Apply, then click Yes.
Adaptec Storage Manager builds the RAID Volume. The
configuration is saved on the Adaptec controller and on the physical
drives.
Adaptec Storage Manager replaces the individual logical drives with
a single RAID Volume in the Logical Devices View. The Event
Viewer shows that the logical drives have been deleted.
10 Partition and format your RAID Volume. See page 50 for more
information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Building Your Storage Space
●
59
RAID Controller Support
The maximum number of RAID controllers supported by Adaptec
Storage Manager varies, depending on your computer’s operating
system:
● Windows—up to 16 Adaptec RAID controllers
● Linux—up to 12 Adaptec RAID controllers
● NetWare—up to 16 Adaptec RAID controllers
Note: For the most recent operating system support information, visit
www.adaptec.com.
Managing Your Storage Space
Once your storage space is built, you can add systems, controllers, and
disk drives to meet your changing needs, then create logical drives by
repeating the steps in this chapter.
Customizing Adaptec Storage Manager on page 60.
To learn how to monitor, manage, and modify your storage space, see
● Managing Tasks on page 123
● Managing Remote Systems on page 132
● Working with Display Groups on page 134
● Managing Controllers and Disk Drives on page 139
● Solving Problems on page 146
To find the most commonly asked-about information, see Quick
Answers to Common Questions... on page 156.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting
Started
5
4
3
2
1
In this chapter...
Logging In to Remote Systems..........................................................61
Creating Display Groups ...................................................................63
Setting Preferences and Changing Views..........................................65
Customizing the Adaptec Storage Manager Agent...........................67
You can customize Adaptec Storage Manager to make managing your
storage space easier and more effective:
● Log in to other systems on your network to view and manage all
your controllers, disk drives, and logical drives from your local
system (see page 61).
● Create display groups to organize related local and remote systems
(see page 63).
● Change display settings, and add or remove features from the main
window (see page 65).
● Change alarm settings, or set the agent to broadcast event notices
from selected systems (see page 67).
Note: The tasks described in this chapter are optional.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5: Customizing Adaptec Storage Manager
●
61
Logging In to Remote Systems
If multiple computers (or systems) on your network are in your storage
space, you can use Adaptec Storage Manager to monitor and manage all
of them from one computer.
The computer that you’re working on is called the local system. All other
computers in your storage space are remote systems. ‘Local’ and ‘remote’
are relative terms, as shown in the Figure below: when you are working
on workstation A (local system), server B is a remote system; when you
are working on server B (local system), workstation A is a remote
system.
B
A
Local logged in
to remote
Server
Server running
Adaptec Storage Manager
Workstation running
Adaptec Storage Manager
or Agent
B
A
Local logged in
to remote
Server
Server running
Adaptec Storage Manager
Workstation running
Adaptec Storage Manager
or Agent
To manage remote systems, you log in to them from the local system.
Adaptec Storage Manager or the Adaptec Storage Manager agent (see
page 33) must be running on the remote system and before you can log
in to it.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5: Customizing Adaptec Storage Manager
●
62
When you log in to a remote system, you add that system to the
Enterprise View of Adaptec Storage Manager, as shown in the example
below.
Once you have logged in to a remote system, it is automatically included
in the Enterprise View each time you start Adaptec Storage Manager
from the local system.
To log in to a remote system:
1 From the menu bar, click Remote, then select Add Remote System.
The Add Remote System window opens.
2 Enter the host name or TCP/IP address of the remote system.
3 Enter the startup port number of the remote system. The default
port number is 34571.
4 If prompted, enter your user name and password. (User names and
passwords are case sensitive.)
To save this user name and password, click inside the Save user
name/password box.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5: Customizing Adaptec Storage Manager
5 Click Connect.
●
63
Adaptec Storage Manager connects to the remote system and adds it
6 To manage the remote system, select it in the Enterprise View and
enter your user name and password if prompted.
To create logical drives on your remote systems, see Step 4: Building
Your Storage Space on page 47.
For more information about remote systems, see Managing Remote
Systems on page 132.
Creating Display Groups
You can organize related local and remote systems into display groups
to make managing your storage space easier and more effective.
Systems in a display group appear together in the Enterprise View under
the group name.
To create a display group:
1 In the Enterprise View, right-click on a system that you want to add
to a display group.
2 Select Change display group, then click New group.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5: Customizing Adaptec Storage Manager
●
64
3 Enter a name for the new display group, then click OK.
The display group is created and the system you selected in Step 1 is
added to it.
4 To add another system to the display group, right-click on that
system in the Enterprise View, select Change display group, then
click the display group name.
The system is added to the display group.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5: Customizing Adaptec Storage Manager
●
Display groups are sorted alphabetically and appear in the Enterprise
View below any systems that are not part of a display group.
A system can belong to only one display group at a time; you can’t
include the same system in multiple display groups.
Setting Preferences and Changing Views
You can customize Adaptec Storage Manager by:
● Sorting the systems in the Enterprise View (see below).
● Selecting the standard unit of measure shown for disk drives (see
page 66).
● Excluding the tool bar or status bar from the main window, or
turning off the Tool Tips (see page 66).
Sorting Systems in the Enterprise View
You can set Adaptec Storage Manager to sort systems in the Enterprise
View alphabetically or chronologically. By default, systems are listed in
alphabetical order. The local system always appears first when you sort
objects alphabetically.
To re-sort the Enterprise View:
1
In the menu bar of the main window, select File, then click Preferences.
2 Click the Display options tab.
3 In the System tree sorting drop-down menu, select the option you
want.
4 Click OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5: Customizing Adaptec Storage Manager
●
66
Setting the Standard Unit of Measure
You can set Adaptec Storage Manager to show disk drive capacity in
measures of megabytes (MB), gigabytes (GB), or terabytes (TB).
You can choose the Auto-select setting to allow Adaptec Storage
Manager to show the most appropriate unit of measure based on disk
drive size. This option allows different disk drives to be shown in
different units of measure.
By default, disk drives are shown in GB.
To change the standard unit of measure:
1 In the menu bar of the main window, select File, then click
Preferences.
2 Click the Display options tab.
3 In the Capacity display units drop-down menu, select the option
you want.
4 Click OK.
Changing the Main Window Appearance
You can choose to remove the tool bar and status bar from the main
Adaptec Storage Manager window to save space on-screen. You can also
choose to turn off the Tool Tips that automatically appear when you
place your cursor over on-screen items.
To change the appearance of the main window, in the menu bar select
View. The options in the View menu are toggle switches, which means
that they can be selected and deselected by clicking on them.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5: Customizing Adaptec Storage Manager
●
67
Customizing the Adaptec Storage Manager
Agent
The Adaptec Storage Manager agent’s default settings are suitable for
most storage spaces. (See page 17 for more information about the
● Setting the agent to broadcast events on that system to all logged-in
users. See below.
● Changing the frequency and duration of the alarm, or choose to
disable the alarm for that system. See page 67.
● Changing the operating system event log setting for that system. See
page 69.
● Changing to agent base port number on that system. See page 69.
Any changes you make to the agent settings affect the selected system
only and are not applied to all systems in your storage space.
Broadcasting Event Alerts from a System
space network. You might want to do this if your storage space isn’t
managed by a dedicated person, or if that particular system is off-site or
isn’t connected to a monitor.
Event alerts signal to everyone working on the storage space that
technical assistance is required for that system.
For more information, see Broadcasting Event Alerts to Users on page
120.
Changing a System’s Audible Alarm Settings
Warning- and Error-level events on a system (see page 101) trigger an
audible alarm, a series of beeps which sound every five minutes until
the event is resolved.
You can change the frequency and duration of the alarm, or choose to
disable the alarm on any system. For information about using the
audible alarm, see page 121.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5: Customizing Adaptec Storage Manager
●
68
To change alarm settings on a system:
1 Click the Configure button, select the system you want, then click
General Settings.
The Adaptec Storage Manager Agent General Settings window opens
for that system.
2 Edit the alarm settings as required. (Select or deselect Sound alarm;
change the alarm interval time.)
Caution: If you disable the alarm, no audible signal will sound
on that system when a Warning- or Error-level event occurs.
!
3 Click Save changes.
4 Restart Adaptec Storage Manager to apply the new settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5: Customizing Adaptec Storage Manager
●
69
Changing a System’s Event Log Setting
in the operating system event log.
To disable operating system event logging on a system:
1 Click the Configure button, select the system you want, then click
General Settings.
The Adaptec Storage Manager Agent General Settings window opens
for that system. (See Step 1 on page 68.)
2 Deselect Save events in OS event log.
3 Click Save changes.
4 Restart Adaptec Storage Manager to apply the new setting.
Changing a System’s Agent Base Port Number
Adaptec Storage Manager uses four consecutive ports to access remote
systems: 34571, 34572, 34573, and 34574. The default port number for
the agent is 34571. If your system has a conflict with these ports, change
the base port to a different port number.
To change the agent base port number:
1 Click the Configure button, select the system you want, then click
General Settings.
The Adaptec Storage Manager Agent General Settings window opens
for that system. (See Step 1 on page 68.)
2 Enter a new agent system base port number.
3 Click Save changes.
4 Restart Adaptec Storage Manager and the Adaptec Storage Manager
agent to apply the new setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
In this chapter...
When to Choose Bootable-CD Mode...............................................71
Getting Started in Bootable-CD Mode.............................................71
Running Adaptec Storage Manager from the CD............................72
This chapter describes how to run Adaptec Storage Manager from the
Adaptec RAID installation CD included in the kit, instead of as an
installed application. When you run Adaptec Storage Manager from the
CD, you are using bootable-CD mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8: Running Adaptec Storage Manager from the CD
●
71
When to Choose Bootable-CD Mode
Use Adaptec Storage Manager in bootable-CD mode if you want to
install your operating system on a disk drive or logical drive associated
with your controller. Bootable-CD mode lets you configure the
controller before you install your operating system.
After you have configured the controller and installed the operating
system, install and run Adaptec Storage Manager as an installed
software application (see page 24).
Bootable-CD Mode Limitations
Running Adaptec Storage Manager from the CD is not an alternative to
running it as an installed software application. Most of the features and
functions described in this User’s Guide are not available when you are
running Adaptec Storage Manager from the CD. Bootable-CD mode is
only for configuring your controller before you install an operating
system.
Getting Started in Bootable-CD Mode
storage space with Adaptec Storage Manager in bootable-CD mode.
● Install your Adaptec RAID controller.
● Run Adaptec Storage Manager (see page 72).
For an introduction to the Adaptec Storage Manager window and its
features, see Step 3: Exploring Adaptec Storage Manager on page 39.
● Install your operating system (and controller device drivers, if
appropriate).
● Install Adaptec Storage Manager as a software application (see
page 24).
● Continue to build, customize, and manage your storage space as
described in the rest of this User’s Guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8: Running Adaptec Storage Manager from the CD
●
72
Running Adaptec Storage Manager from the
CD
Note: Before you begin, ensure that your system is set up to boot from a
CD. Check the system BIOS to see if the CD drive is listed first in the boot
order. For more information, refer to your computer’s documentation.
To run Adaptec Storage Manager in bootable-CD mode:
1 Insert the RAID installation CD into your CD drive, then restart
your computer.
2 When prompted, select the language you want, then press Enter.
3 Review the license information, then press Enter.
The main Adaptec Storage Manager CD menu opens.
4 Click Launch Configuration Utility.
Adaptec Storage Manager opens.
5 Click Create..
The Configuration wizard opens.
6 Continue with Step 4: Building Your Storage Space on page 47.
Download from Www.Somanuals.com. All Manuals Search And Download.
In this chapter...
Understanding Logical Drives...........................................................74
Creating Logical Drives .....................................................................75
Fine-tuning Logical Drives................................................................78
Verifying Logical Drives.....................................................................81
Increasing the Capacity of a Logical Drive.......................................84
Changing the RAID Level of a Logical Drive ...................................87
Deleting a Logical Drive ....................................................................89
Working with Hot Spares ..................................................................90
This chapter explains how to manage logical drives and hot spares
associated with Adaptec RAID controllers.
To create a logical drive, see Step 4: Building Your Storage Space on page 47.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9: Managing Logical Drives and Hot Spares
●
74
Understanding Logical Drives
A logical drive is a group of physical disk drives that appears to your
operating system as a single drive that can be used for storing data.
A logical drive can comprise one or more disk drives and can use part or
all of each disk drive’s capacity.
It is possible to include the same disk drive in two different logical
drives by using just a portion of the space on the disk drive in each, as
illustrated below.
Disk Drives (500 MB Each)
RAID 5 Logical Drive
250 MB 250 MB
RAID 1 Logical Drive
250 MB
250 MB
Available
Space
250 MB
250 MB
250 MB
250 MB
250 MB 250 MB
Segment (250 MB)
Segment (250 MB)
Disk drive space that has been assigned to a logical drive is called a
space. A disk drive with one segment is part of one logical drive, a disk
drive with two segments is part of two logical drives, and so on. A
segment can be part of only one logical drive. When a logical drive is
deleted, the segments that comprised it revert to available space (or free
segments).
A logical drive can include redundancy, depending on the RAID level
assigned to it. (See Understanding RAID on page 163 for more
information.)
Once a logical drive has been created, you can change its RAID level or
increase its capacity to meet changing requirements. You can also
protect your logical drives by assigning one or more hot spares to them.
(See page 90 for more information.)
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9: Managing Logical Drives and Hot Spares
●
75
Creating Logical Drives
For basic instructions for creating logical drives, see Step 4: Building
This section describes three additional scenarios for creating logical
drives:
● Including different-sized disk drives in a logical drive (see page 76)
● Creating a logical drive using available segments of disk drives (see
page 77)
Setting the Size of a Logical Drive
capacity of the disk drives that it comprises. However, you can choose to
set the size for a new logical drive. You may want to do this to maximize
your available disk drive space, or allocate available space to more than
one logical drive.
To set the size of a logical drive,
1 Complete Steps 1 through 6 in Custom Configuration (Advanced) on
page 51.
2 Click Advanced Settings.
The maximum size of the logical drive appears in the Size (GB) box.
3 Enter the new size for the logical drive. The size you enter must be
less than or equal to the maximum size.
4 Click Next.
5 Review the logical drive settings, click Apply, then click Yes.
Adaptec Storage Manager builds the logical drive. The configuration
is saved in the Adaptec controller and in the physical drives.
If the disk drives you used to create this logical drive have available
space left over, you can use them to create a new logical drive (see
page 77), or to expand an existing logical drive (see page 84).
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9: Managing Logical Drives and Hot Spares
●
76
Including Different-sized Disk Drives in a Logical Drive
You can combine disk drives of different sizes in the same logical drive.
If the logical drive includes redundancy, however, the size of each
segment can be no larger than the size of the smallest disk drive. (See
page 163 for more information about redundancy.)
To create a logical drive with disk drives of different sizes, follow the
instructions in Step 4: Building Your Storage Space on page 47. When the
logical drive is created, it appears similar to the example shown below,
where a RAID 5 logical drive includes two 16.95 GB disk drives and two
9.766 GB disk drives.
The Full Size Capacity View of the same RAID 5 logical drive shows that
the two larger disk drives still have available space (free segments,
indicated in light-blue) that is not part of a logical drive.
Light-blue segments are not part of a logical drive
You can include a disk drive’s available space in a new logical drive (see
page 77), or add it to an existing logical drive (see page 84).
Download from Www.Somanuals.com. All Manuals Search And Download.
●
Creating a Logical Drive Using Available Space
Free segments on a disk drive can be used to create a new logical drive.
(A segment can only be used in one logical drive at a time.)
To create a logical drive using free segments on disk drives:
1 Complete Steps 1 through 5 in Custom Configuration (Advanced) on
page 51.
2 In the Physical Devices panel, select the disk drives and/or free disk
drive segments you want to use in the logical drive.
In the example below, two free disk drive segments (indicated in
blue) are used to create a RAID 1 logical drive.
Free segments and available disk drives are blue
3 Click Next.
4 Review the logical drive settings.
5 Click Apply, then click Yes.
Adaptec Storage Manager builds the logical drive. The configuration
is saved in the Adaptec controller and in the physical drives.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9: Managing Logical Drives and Hot Spares
●
78
Fine-tuning Logical Drives
You can fine-tune a new or existing logical drive to meet your needs by
adjusting the Advanced settings described in this section. (Not all
options are available for all controllers or all RAID levels.)
Note: The default settings in Adaptec Storage Manager are optimal for
settings described in this section.
To fine-tune a logical drive:
1 Open the list of Advanced settings.
If you are creating a new logical drive, follow the instructions in
Step 6 on page 53.
If you are modifying an existing logical drive:
a In the Enterprise View, click the controller associated with the
logical drive.
logical device.
d Click Next, then click Advanced settings.
all options are available for all controllers or all RAID levels):
●
●
●
●
●
●
Logical drive size (see page 75)
Write cache (see page 79)
Stripe size (see page 79)
Read cache (see page 80)
Initialize method (see page 80)
Initialize priority (see page 81)
2 Click Next.
3 To apply the changes immediately, click Apply.
To schedule the changes for later, click Schedule, then set the date
and time. (For more information, see page 124.)
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9: Managing Logical Drives and Hot Spares
●
79
Changing the Write Cache Setting
The write cache setting determines when data is stored on a disk drive
and when the controller communicates with the operating system.
● Disabled (write-through)—The controller sends (or writes) the data
to a disk drive, then sends confirmation to the operating system that
the data was received. Use this setting when performance is less
important than data protection.
● Enabled (write-back)—The controller sends confirmation to the
operating system that the data was received, then writes the data to a
disk drive. Use this setting when performance is more important
than data protection and you aren’t using a battery-backup cache.
Enabled is the default setting.
● Enabled (write-back) when protected by battery—The controller
sends confirmation to the operating system that the data was
received, then writes the data to a disk drive. Use this setting if you
are using a battery-backup cache and performance is more
important than data protection.
Note: (RAID 10, 50, and 60 only) All logical drives within a RAID 10/
50/60 logical drive must have the same write cache setting—either all
write-through or all write-back.
To quickly change the write cache setting, click the logical drive you
want; then, in the menu bar, select Actions, click Configure write cache,
then select Enabled or Disabled as required.
Changing the Stripe Size
The stripe size is the amount of data (in KB) written to one partition
before the controller moves to the next partition in a logical drive.
Stripe size options vary, depending on your controller. Normally, the
default stripe size provides the best performance.
For RAID 6 and RAID 60 logical drives, the more disk drives there are
in the logical drive, the fewer the stripe size options.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9: Managing Logical Drives and Hot Spares
●
80
Changing the Read Cache Setting
When read caching is enabled, the controller monitors the read access to
a logical drive and, if it sees a pattern, pre-loads the cache with data that
seems most likely to be read next, increasing performance.
● Enabled—The controller transfers data from the logical drive to its
local cache in portions equal to the stripe size. Use this setting for
the best performance when workloads are steady and sequential.
Enabled is the default setting.
● Disabled—The controller transfers data from the logical drive to its
local cache in portions equal to the system I/O request size. Use this
setting for the best performance when workloads are random or the
system I/O requests are smaller than the stripe size. (For more
information about system I/O requests, refer to your operating
system documentation.)
To quickly change the read cache setting, click the logical drive you
want; then, in the menu bar, select Actions, click Configure read cache,
then select Enabled or Disabled as required.
Changing the Initialize Method
The Initialize Method setting determines how a logical drive is
initialized (prepared for reading and writing), and how long
initialization will take. The settings are presented in order of slowest to
fastest method.
● Build—(slowest) For RAID 1 logical drives, data is copied from the
primary drive to the mirror drive; for RAID 5 logical drives, parity is
computed and written. Build is the default setting.
Adaptec Storage Manager performs build initializations in the
background; you can use the logical drive immediately.
● Clear—Every block in the logical drive is overwritten, removing all
existing data. You can’t use the logical drive until the initialization is
complete.
● Quick—(fastest) The logical drive is made available immediately.
Quick initialization should be used for new physical disks only.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9: Managing Logical Drives and Hot Spares
●
81
Changing the Initialize Priority
The Initialize Priority setting determines the priority for the
initialization of the logical drive. The default setting is High, which
means that the logical drive is initialized as quickly as possible.
Verifying Logical Drives
To ensure that there are no data problems on your logical drives, it is
important to verify them. When you verify a logical drive, Adaptec
Storage Manager checks it for inconsistent or bad data and then fixes any
problems. (You can also choose to verify a logical drive without fixing it.)
Logical drives with no redundancy (for instance, RAID 0 logical drives)
do not need to be verified.
In Adaptec Storage Manager, logical drive verification can occur in
different ways, depending on your controller:
●
Automatic verification—If your controller supports build
initialization, Adaptec Storage Manager automatically verifies all new
To see if your controller supports build initialization, right-click the
controller in the Enterprise View and click Properties.
● Manual verification—If your controller doesn’t support build
initialization, a Warning-level event notice appears in the Event
Viewer prompting you to verify a logical drive before you begin to
use it. To verify a logical drive manually, see Verifying Logical Drives
on page 81.
● Background verification—If your controller supports background
consistency check, Adaptec Storage Manager continually and
automatically checks your logical drives once they’re in use.
To see if your controller supports background consistency check,
right-click the controller in the Enterprise View and click Properties
.
To enable or disable background consistency check, see page 84.
Note: If your controller doesn’t support background consistency
check, Adaptec highly recommends that you verify your logical
drives weekly, following the instructions in Verifying Logical Drives
on page 81.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9: Managing Logical Drives and Hot Spares
●
82
Verifying and Fixing a Logical Drive
Note: To verify a logical drive without fixing it, see page 83.
While Adaptec Storage Manager verifies and fixes a logical drive, you
can’t complete any other tasks on the controller. Because the
verification can take a long time to complete, you may want to schedule
it as a task to be completed overnight or on a weekend.
To verify and fix a logical drive:
1 In the Enterprise View, click the controller associated with the
logical drive.
2 In the Logical Devices View, click the logical drive.
3 In the menu bar, select Actions, then click Verify with fix.
4 To begin the verification immediately, click Yes.
To schedule the verification, click Schedule, then set the date and
time. You can also choose to set the verification as a recurring task.
(For more information, see page 124.)
Note: Don’t power off the system while the verification is in
progress. If you do, the verification will stop.
While the verification is in progress, the logical device is
shown as an animated icon (as shown at right) to indicate
that the task is in progress.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9: Managing Logical Drives and Hot Spares
●
83
When the verification is complete, an event notice is generated in the
local system’s event log (and broadcast to other systems, if you have
event notification set up—see page 103).
You can now continue working on the controller.
Verifying a Logical Drive (Without Fix)
Note: To verify and fix a logical drive, see page 84.
While Adaptec Storage Manager verifies a logical drive, you can’t
complete any other tasks on the controller associated with that logical
drive. Because verification takes a long time to complete, you may want
to schedule it as a task to be completed overnight or on a weekend.
To verify a logical drive:
1 In the Enterprise View, click the controller associated with the
logical drive.
2 In the Logical Devices View, click the logical drive.
3 In the menu bar, select Actions, then click Verify.
4 To begin the verification immediately, click Yes.
To schedule the verification for later, click Schedule, set the date and
time, then click Apply. You can also set the verification to recur. (For
more information, see page 124.)
Note: Don’t power off the system while the verification is in
progress. If you do, the verification will stop.
Download from Www.Somanuals.com. All Manuals Search And Download.
While the verification is in progress, the logical device is
shown as an animated icon (as shown at right) to indicate that
the task is in progress.
When the verification is complete, an event notice is generated in the
local system’s event log (and broadcast to other systems, if you have
event notification set up—see page 103).
You can now continue working on the controller.
Enabling/Disabling Background Consistency Check
If your controller supports background consistency check, Adaptec
Storage Manager continually and automatically checks your logical
drives once they’re in use. (To see if your controller supports
background consistency check, right-click the controller in the
Enterprise View and click Properties.)
To enable or disable background consistency check:
1 In the Enterprise View, click the controller.
2 In the menu bar, select Actions, then click Enable (Disable)
background consistency check.
The controller is updated with the new setting.
Increasing the Capacity of a Logical Drive
You can add more disk drive space to a logical drive to increase its
capacity (or expand it).
Note: The maximum size of a logical drive varies by controller. Refer to
your controller’s documentation for more information.
The expanded logical drive must have a capacity that’s greater than or
equal to the original logical drive.
To increase the capacity of a logical drive:
1 In the Enterprise View, click the controller associated with the
logical drive.
2 In the Logical Devices View, click the logical drive.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9: Managing Logical Drives and Hot Spares
●
85
3 In the menu bar, select Actions, then click Expand or change logical
device.
A wizard opens to help you modify the logical drive.
4 Click Next.
5 Click on the disk drive(s) or disk drive segments you want to add to
the logical drive.
If you want to remove a specific disk drive or segment and replace it
with another one (for instance, replace a smaller disk drive with a
larger one), click on the disk drive you want to remove.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9: Managing Logical Drives and Hot Spares
●
86
An X indicates that the selected disk drive will be removed from the
logical drive, and you are prompted to select another disk drive (of
greater or equal size) to replace it.
Flashing arrow prompts you to replace the deselected disk drive
6 Modify the Advanced Settings, if required. (See Fine-tuning Logical
Drives on page 78.)
7 Click Next.
8 Review the new logical drive settings. To make changes, click Back.
Note: Some operating systems have size limitations for logical
drives. Before you save the configuration, verify that the size of the
logical drive is appropriate for your operating system.
9 To update your logical drive immediately, click Apply, then click Yes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9: Managing Logical Drives and Hot Spares
●
87
To schedule the changes for later, click Schedule, set the date and
time, then click Apply. (For more information, see page 124.)
Extending a Partition on a Logical Drive
(Windows 2003, Windows XP, and Windows 2000 only) If you have
expanded a logical drive, you can extend the partition on that logical
drive to use the newly added space. Refer to your operating system
instructions for more information.
Changing the RAID Level of a Logical Drive
As your requirements change, you can change the RAID level of your
logical devices to suit your needs.
You may want to do this to add redundancy to protect your data, or
improve data availability for speedier access to your data. See
Understanding RAID on page 163 for more information.
Changing the RAID level normally requires one or more disk drives to
be added to or removed from the logical drive. Adaptec Storage
Manager won’t allow you to continue unless you have the right number
of disk drives available.
To change the RAID level of a logical drive:
1 In the Enterprise View, click the controller associated with the
logical drive.
2 In the Logical Devices View, click the logical drive.
3 In the menu bar, select Actions, then click Expand or change logical
device (see page 85).
A wizard opens to help you change the RAID level.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9: Managing Logical Drives and Hot Spares
●
88
4 Select a new RAID level, then click Next. Only valid options are
offered.
In the example shown in this section, a RAID 1 logical device is
being changed to a RAID 5 logical device.
5 In the Logical Devices panel, select the disk drives you want to use in
the modified logical drive.
Adaptec Storage Manager prompts you to select the correct number
of disk drives, as shown below.
Number of disk drives required
If you want to remove a specific disk drive and replace it with
another one (for instance, replace a smaller disk drive with a larger
one), click on the disk drive you want to remove. An X indicates that
the selected disk drive will be removed from the logical drive.
6 Modify the Advanced Settings, if required. (See Fine-tuning Logical
Drives on page 78.)
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9: Managing Logical Drives and Hot Spares
7 Click Next.
●
89
8 Review the new logical drive settings. To make changes, click Back.
Note: Some operating systems have size limitations for logical
drives. Before you save the configuration, verify that the size of the
logical drive is appropriate for your operating system.
9 To update your logical drive immediately, click Apply, then click Yes.
To schedule the changes for later, click Schedule, set the date and
time, then click Apply. (For more information, see page 124.)
Deleting a Logical Drive
Caution: When you delete a logical drive, you lose all data stored on
that logical drive.
!
To delete a logical drive:
Ensure that you no longer need the data stored on the logical drive.
1 In the Enterprise View, click on the controller associated with the
logical drive.
2 In the Logical Devices View, click the logical drive.
3 In the menu bar, select Actions, then click Delete logical device.
Download from Www.Somanuals.com. All Manuals Search And Download.
●
90
4 When prompted, click Yes to delete the device, or No to cancel the
deletion.
If you click Yes, the logical device is deleted. The disk drives or drive
segments included in the logical device become available, and can be
existing logical drive (see page 84).
Working with Hot Spares
A hot spare is a disk drive that automatically replaces any failed drive in
a logical drive, and can subsequently be used to rebuild that logical
drive. (For more information on recovering from a disk drive failure,
see page 147.)
Hot Spare Limitations
● You can’t create a hot spare for RAID 0 logical drives, simple
volumes, or spanned volumes.
● You can’t create a hot spare from a disk drive that is already part of a
logical drive.
● You should select a disk drive that is at least as big as the largest disk
drive it might replace.
Dedicated Spare or Global Spare?
A global hot spare is not assigned to a specific logical drive and will
protect any logical drive on the controller (except RAID 0 logical
logical drives on a controller; you can also designate a global hot spare
while you’re creating a logical drive. To designate a global hot spare, see
page 91.
A dedicated hot spare is assigned to one or more specific logical drives
and will only protect those logical drives. You must create the logical
drive before you can assign a dedicated hot spare. To assign a dedicated
hot spare, see page 92.
Download from Www.Somanuals.com. All Manuals Search And Download.
●
91
Designating a Global Hot Spare
This section describes how to designate a global hot spare before or
after you build a logical drive.
Note: To designate a global hot spare while you’re creating a logical
drive, see Step 6 on page 53.
To designate a global hot spare:
1 In the Enterprise View, click the controller on which you want a
global hot spare.
2 In the Physical Devices View, click the disk drive you want to
designate as a hot spare. (See Hot Spare Limitations on page 90 for
help selecting a disk drive.)
3
Click the Create global hot-spare drive button (shown at right).
A plus sign appears beside the selected disk drive, indicating that it’s
designated as a hot spare. (A yellow plus sign indicates an error. See
What Do the Hot Spare Icons Mean? on page 93 for help solving the
problem.)
Hot spare
Any other logical drives created on the controller will automatically
be protected by that global hot spare.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9: Managing Logical Drives and Hot Spares
●
92
Assigning a Dedicated Hot Spare
A dedicated hot spare is assigned to one or more specific logical drives.
To assign a dedicated hot spare:
1 In the Enterprise View, click the controller on which you want a
dedicated hot spare.
2 In the Physical Devices View, click the disk drive you want to
designate as a hot spare. (See Hot Spare Limitations on page 90 for
help selecting a disk drive.)
3 In the menu bar, select Actions, then click Create dedicated hot-
spare drive for, then click the name of the logical drive. (In the
example below, the logical drive name is “Clients”.)
A plus sign appears beside the selected disk drive, indicating that it’s
designated as a dedicated hot spare. (A yellow plus sign indicates an
error. See What Do the Hot Spare Icons Mean? on page 93 for help
solving the problem.)
Hot spare
4 To use the same dedicated hot spare to protect another logical drive,
repeat Step 2 and Step 3.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9: Managing Logical Drives and Hot Spares
●
93
What Do the Hot Spare Icons Mean?
Icon
Explanation
Action
● Healthy global or dedicated
No action required.
hot spare
● Hot spare is not assigned to
● Create at least one logical
any logical drives
drive on the same controller
● Hot spare is too small to
protect the logical drive(s) it’s
assigned to
● Designate larger disk drive as
hot spare
● Global hot spare was
designated before any logical
drives were built
● Create at least one logical
drive on the same controller
● Hot spare has been built into a ● Designate replacement or
logical drive after disk drive
failure
other available disk drive as
new hot spare; remove ‘hot
spare’ designation from disk
drive (see below)
Removing a Hot Spare
You can remove a global hot spare or dedicated hot spare. You may want
to do this to:
● Make a dedicated hot spare into a global hot spare or a global hot
spare into a dedicated hot spare.
● Remove the ‘hot spare’ designation from a disk drive that is no
longer being used as a hot spare. (When a hot spare is built into a
logical drive after a disk drive failure, it retains its ‘hot spare’
designation even though it can no longer protect the logical drives
it’s assigned to. See Recovering from a Disk Drive Failure on page 147
for more information.)
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9: Managing Logical Drives and Hot Spares
●
94
To remove a hot spare:
1 In the Enterprise View, click the controller associated with the hot
spare.
2 In the Physical Devices View, click the hot spare.
3 In the menu bar, select Actions, then click Delete hot-spare drive or
Delete dedicated hot-spare drive.
The hot spare is deleted, and the disk drive becomes available for
other uses in your storage space.
Download from Www.Somanuals.com. All Manuals Search And Download.
Protecting Your Data
In this chapter...
Creating a Snapshot...........................................................................96
Enabling Copyback............................................................................98
This chapter describes two additional methods of protecting the data on
your storage space, Snapshot and Copyback.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10: Protecting Your Data
●
96
Creating a Snapshot
Note: Snapshot is an upgrade feature; if the Snapshot feature is locked,
see Adding Enhanced Features on page 21 for information on
purchasing a feature key.
time. You can copy the data on one logical device to another logical
device by creating a snapshot. You may want to do this if you want to
back up your data to tape, clone a drive, or copy the data to multiple
servers.
There are two snapshot options:
● Snapshot Backup—Copies all data on a logical drive so that it can be
moved from one server to another. See page 97.
● Snapshot Nobackup—Creates a temporary copy of a logical drive
for tape backup and reference (uses less system resources than
Snapshot Backup).
Snapshot Limitations
● You can create a snapshot of only one controller at a time; you can’t
create a snapshot that includes multiple controllers.
● The source logical drive (the logical drive that you’re copying) and
the target logical drive (the logical drive that you’re copying to) must
be on the same controller.
● The source and target logical drives may have the same or different
RAID levels.
● You can create up to four snapshots on each controller.
● The size of the target logical drive must be greater than or equal to
the size of the source logical drive.
● You can’t modify any information on a snapshot.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10: Protecting Your Data
●
97
Creating a Snapshot with Backup
To create a snapshot with backup:
1 In the Logical Devices View, right-click the logical drive you want to
copy.
2 Select Create snapshot, click with backup to, then click the name of
the target logical drive.
The snapshot is created on the target logical drive. The
snapshot appears in Adaptec Storage Manager with a camera
icon beside it, as shown at right.
Creating a Snapshot Without Backup
To create a snapshot without backup:
1 In the Logical Devices View, right-click the logical drive you want to
copy.
2 Select Create snapshot, click without backup to, then click the name
of the target logical drive.
The snapshot is created on the target logical drive. The
snapshot appears in Adaptec Storage Manager with a camera
icon beside it, as shown at right.
3 Use an operating system-level or third-party data backup tool to
move the snapshot onto a tape drive or other server.
Deleting a Snapshot
When a snapshot is no longer needed, you can delete it from Adaptec
Storage Manager.
To delete a snapshot:
1 In the Logical Devices View, right-click the snapshot you want to
delete.
2 Click Remove snapshot.
The snapshot is deleted.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10: Protecting Your Data
●
98
Enabling Copyback
Note: Copyback is an upgrade feature; if the Copyback feature is
locked, see Adding Enhanced Features on page 21 for information on
purchasing a feature key.
When a logical drive is rebuilt using a hot spare (see page 148), data
from the failed drive is transferred to the hot spare. When copyback is
enabled, data is moved back to its original location once the controller
detects that the failed drive has been replaced. Once the data is copied
back, the hot spare becomes available again.
Copyback is disabled by default.
To enable copyback, right-click the controller, then click Enable or
Disable copy back mode. (The copyback setting is a toggle switch.)
Download from Www.Somanuals.com. All Manuals Search And Download.
Space
In this chapter...
Monitoring Options ........................................................................100
Checking Activity in Your Storage Space........................................101
What Do the Status Icons Mean?....................................................102
Using Event Notifications to Monitor Status .................................103
Broadcasting Event Alerts to Users .................................................120
Silencing and Testing the Audible Alarm........................................121
Viewing Component Properties .....................................................122
This chapter describes how Adaptec Storage Manager helps you
monitor your storage space.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
●
100
Monitoring Options
Adaptec Storage Manager provides many ways to monitor the status of
your storage space:
● Event Viewer—The main window of Adaptec Storage Manager
includes an Event Viewer that provides at-a-glance status
page 101.)
●
Status Icons—Three basic icons (information, warning, and error)
appear in the Event Viewer and in the main Adaptec Storage Manager
window to help you quickly identify problems. (See page 102.)
● Notification Manager and Email Notification Manager—
Notification utilities help you monitor these activities on local and
remote systems (see page 103 and page 111):
●
Progress of scheduled tasks, such as logical drive verifications.
●
Changes in the status of the physical components of your storage
space, such as disk drives.
●
Changes to the local system, such as the expansion of a logical
drive expansion or the creation of a hot spare.
● Audible Alarm—A series of beeps sounds whenever a serious event
occurs on your storage space. (See page 121.)
● Properties Button—You can check the status of any component in
your storage space by using the Properties button. (See page 122.)
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Activity in Your Storage Space
From your local system, you can see status information and messages
about the activity (or events) occurring in your storage space by looking
at the Event Viewer, which displays a log of events. Status is indicated
by an icon in the left-hand column, as shown below. (The icons are
described in What Do the Status Icons Mean? on page 102.)
Double-click any event to see more details in an easier-to-read format.
Click Next to see the next event in the list.
You can monitor activity on, and the status of, remote systems from the
local system by using Adaptec Storage Manager’s two notification
utilities to broadcast messages—the Notification Manager (see page
103) and the Email Notification Manager (see page 111).
Viewing the Full List of Events
To open a full-screen version of the event log, click the
Events button (shown at right).
To make it easier to find a specific event, click on the column heads to
sort the events. (Sort events by status icons—see above—to help you
find specific Error- or Warning-level events.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
●
102
Clearing the Event Log
To clear the event log of all recorded activity:
1 In the menu bar of the main Adaptec Storage Manager window, click
Actions, select Agent actions, then click Clear the configuration
event log.
2 Click Yes to clear the log.
The log is cleared, except for one event reporting that the log was
cleared.
What Do the Status Icons Mean?
Adaptec Storage Manager indicates event status with icons. The Table
below lists the three categories, or types, of events based on severity.
Icon
Status
Examples
Information The local system successfully connected to a remote
system; a logical drive was created; a hot spare was
created; a logical drive was deleted.
Warning
A logical drive is in a degraded state; a disk drive is
being rebuilt.
Error
A controller has failed; a logical drive has failed; a hot
spare has failed; a disk drive within a logical drive has
failed.
Warning- and Error-level icons appear next to components (such as
systems and logical drives) affected by a failure or error, creating a trail,
or rapid fault isolation, that helps you identify the source of a problem
when it occurs. See Identifying a Failed or Failing Component on page
147 for more information.
Note: All Warning- and Error-level events also cause the audible alarm
to sound. See page 121 for more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
●
103
Using Event Notifications to Monitor Status
You can set up Adaptec Storage Manager to broadcast messages (or
notifications) to selected remote systems and users when an event, such as
the creation of a logical drive or the failure of a disk drive, occurs on the
You can set up one or both of these types of notifications for any system
in your storage space:
● Event notifications—Messages about a system are sent to the Event
Viewer of other systems in your storage space. See below.
● Email notifications—Messages about a system are sent by email to
specified users. See page 111.
Setting up Event Notifications
Event notifications are messages about events on one system that are
sent to the Event Viewer of another system in your storage space. These
messages, called logged notifications, can help you monitor activity on
your entire storage space from a single local station, and are especially
useful in storage spaces that include multiple systems running the
Adaptec Storage Manager agent only.
Logged notifications include status information and identify which
system (or source) an event occurred on. For instance, in the example
shown below, the Event Viewer indicates that a logical drive was added
to a system named ‘bra2380a’ and then verified.
Logged notifications are not sent to all systems in your storage space. In
the Notification Manager, you can specify which systems will send and
receive logged notifications; then, you can add or delete systems as your
storage space grows and changes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
●
104
Opening the Notification Manager and Adding Systems
This section describes how to set up event notifications for one system
in your storage space. You must complete the tasks in this section for
each individual system that you’ll be monitoring with logged
notifications.
To set up event notifications for a system:
1 Note this information for each system that will receive event
notifications about the selected system:
●
Host name or TCP/IP address
●
TCP/IP port number (or the default, 34571)
2 In the Adaptec Storage Manager tool bar, click Configure, select the
system you want, then click Notifications.
The Notification Manager opens on the Notifications tab of a new
window. The local system is automatically included on the
Notification List—by default, all local events are listed in the local
Event Viewer.
Notifications Tab
Notification List
Notification Log
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
●
105
3 Add the names of the other system(s) in your storage space that will
receive event notifications generated by this system to the
Notification List:
a In the tool bar, click Add system.
b In the Add System window, enter the host name or TCP/IP
address of the first system. If you are not using the default port
number, 34571, enter the TCP/IP port. Then, click Add.
c If you want more than one system to receive the event
notifications, repeat Step b as required.
d When done, click Cancel to close the Add System window.
The systems you added appear in the Notification List. Although
you can’t sort the list, you can reorganize the columns by clicking
4 Close the Notifications window when you’re done.
Note: You can access other utilities in this window, such as the Task
Manager (see page 123), by clicking their tabs.
5 Repeat Steps 1 to 4 for each system you want to monitor with event
notifications.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
Sending a Test Event
●
To ensure that a system is receiving logged notifications, you can send a
test event.
To send a test event:
1 Open the Notification Manager. (See page 104.)
Note: You can also access the Notification Manager by selecting the
system you want in the Enterprise View, then (on the menu bar)
clicking Actions > Agent actions > Configure > Notifications tab.
2 In the Notification List, click on the system you want to send a test
event to.
Note: You can only send a test event to one system at a time.
3 On the menu bar, select Actions, then click Send test event.
The test event is sent. A message appears indicating either that the
test event was sent successfully or that the test failed. (Click OK to
clear the message.)
If the test is successful, the receiving system beeps once, and its Event
Viewer shows that a test event was received, as shown below.
Test event
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
●
107
If the test fails:
a Ensure that the receiving system is powered on and running
Adaptec Storage Manager.
b Open the receiving system’s System Properties window (see
Step 3 on page 107) and double-check the TCP/IP address and
port number.
c Try sending the test event again.
Managing the Event Notification List
This section describes how to manage systems in the Notification List:
● To add a system to the Notification List, see page 104.
● To modify a system’s connection information, see page 107.
● To remove a system from the Notification List, see page 108.
Modifying a System’s Address or Host Name
If the TCP/IP information or host name of a system changes, update its
properties in the Notification Manager.
Note: Does this system receive event notifications from more than one
other system? Ensure you enter the updated information in the
Notification Manager of all affected systems.
To modify system information:
1 Open the Notification Manager. (See page 104.)
2 In the Notification List, click on the system you want to modify.
3 In the System Properties window, enter the new information, then
click OK.
The Notification List shows the modified information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
Removing a System from the Notification List
●
108
You can remove any system (including the local system) from the
Notification List. Once a system has been removed, logged notifications
from the local system are no longer sent to it.
To remove a system from the Notification List:
1 Open the Notification Manager. (See page 104.)
2 In the Notification List, click on the system you want to remove.
3 In the tool bar, click Delete system.
4 Click Yes to confirm the deletion.
The system is removed from the Notification List.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
●
109
Monitoring and Managing the Notification Log
The Notification Log displays status information and messages about
the Notification Manager itself, such as whether notifications were sent
successfully or not.
This section describes how to manage the Notification Log and use it to
monitor the logged notifications being sent:
● Using the Notification Log (see below).
● Find the Notification Log files (see page 110).
● Clear the Notification Log (see page 110).
Using the Notification Log
By default, notification events are listed in the order they occurred, with
the most recent event first. To make it easier to find a specific event,
click on the column heads to sort the events. You can also reorganize
the columns by clicking and dragging the column heads (see the Figure
on page 105).
The Notification Log uses icons to show the status of events. These
icons also appear in the Event Viewer of the remote systems.
Icon Status
Explanation and Solution
Information The Notification Manager successfully connected and
sent the event. No action required.
Error
The Notification Manager did not successfully connect
to a system or send an event. Ensure that the correct
host name and TCP/IP address of the receiving system
is correct (see page 107).
Double-click on an event to see basic information about it. Click Next
to see the next event in the list.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
Finding the Notification Log Files
●
110
In addition to appearing in the Notification Log, notifications are saved
in a log file named raidnot.log, which can be found in the top-level
Adaptec Storage Manager folder.
The raidnot.log file has a maximum capacity of 200 kilobytes (KBs).
When the capacity is exceeded, old events are copied into a file named
raidnot.old, and a new raidnot.log file is created. If a raidnot.old already
exists, it is overwritten.
Clearing the Notification Log
To make it easier to monitor recent events, you can clear the
Notification Log.
Note: Clearing the Notification Log doesn’t erase the existing
raidnot.log file (see above).
To clear the Notification Log:
1 Open the Notification Manager. (See page 104.)
2 In the menu bar, click File, select Clear the event log, then click
Notifications.
3 Click Yes to clear the log.
The log is cleared, except for one event reporting that the log was
cleared.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
●
111
Disabling Event Notifications
if required.
Note: If you disable event notifications, events will be generated but not
broadcast—not even to the local system.
To disable event notifications:
1 Open the Notification Manager. (See page 104.)
2 In the menu bar, click Actions, then click Disable notifications.
Event notifications are disabled. The Notifications tab
(shown at right) shows the red ‘disabled’ icon.
Re-enabling Event Notifications
To re-enable event notifications, repeat steps 1 and 2 in Disabling Event
Notifications above, selecting Enable Notifications during Step 2.
Setting Up Email Notifications
Email notifications are email messages about events on a system in your
storage space that are sent to specified users. Email notifications can
help you monitor activity on your entire storage space from any
location, and are especially useful in storage spaces that include
multiple systems running the Adaptec Storage Manager agent only.
Only the users you specify receive email notifications. (See page 115.) You
can specify which types of events generate email messages to which
recipients to ensure that errors receive immediate attention from the
right people.
In the Email Notification Manager, you can add and delete email
recipients, and modify the types of email notices they receive, as your
requirements change.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
Opening the Email Notification Manager
●
112
This section describes how to set up email notifications for one system in
your storage space. You must complete the tasks in this section for each
individual system that you’ll be monitoring with email notifications.
To set up email notifications:
1 Note this information:
●
The address of your Simple Mail Transfer Protocol (SMTP)
server (host name and domain, or TCP/IP address)
●
The name and email address of each person who will receive
email notifications
2 In the tool bar, click Configure, select the system you want, then
click Email Notifications.
The Email Notification Manager opens on the Email Notifications
tab of a new window.
Email Notifications Tab
Email List
Email Log
3
If this is the first time you are opening the Email Notification Manager,
continue with Entering the SMTP Server Settings on page 113
.
To set up email notifications, continue with Adding an Email
Recipient on page 113.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
Entering the SMTP Server Settings
●
113
The first time you are opening the Email Notification Manager, the
SMTP Server Settings window opens automatically.
In the SMTP Server Settings window:
1 Enter the address of your SMTP server.
If email recipients will be replying to email notifications, be sure that
the “From” address belongs to a computer that is actively
monitored.
3 Click OK to save the settings.
4 To set up email notifications, continue with Adding an Email
Recipient on page 113.
Adding an Email Recipient
To add an email recipient to the Email List:
1 Open the Email Notification Manager. (See page 111.)
2 In the tool bar, click Add email recipient.
3 In the Add Email Recipient window (shown in the next Step), enter
the recipient’s name and email address.
4 In the Event Type drop-down menu, select an event level. (For more
information on event levels, see page 102.)
5 Click Add.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
●
114
6 Repeat Steps 3 to 5 to add more email recipients.
7 Click Cancel to close the Add Email Recipient window.
The email recipients you added appear in the Email List.
clicking and dragging the column heads (see the Figure on page 105).
8 Close the Email Notifications window when you’re done.
Note: You can access other utilities in this window, such as the Task
Manager (see page 123), by clicking their tabs.
9 Repeat Steps 1 to 8 for each system you want to monitor with email
notifications.
Sending a Test Message
To ensure that an email recipient is receiving event notifications, you
can send them a test message.
To send a test message:
1 Open the Email Notification Manager. (See page 111.)
Note: You can also access the Notification Manager from the menu
bar by clicking Actions > Agent actions > Configure > Email
Notifications tab.
2 Click on the email address you want to send the test message to.
Note: You can only send a test message to one email address at a
time.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
●
115
3 On the menu bar, select Actions, then click Send test message.
The test message is sent.
If the test is successful, the email recipient receives the test message.
If the test fails:
a Ensure that the recipient’s email address is correct. (See
Modifying a Recipient’s Information on page 115 to modify the
address.)
b Ensure that your SMTP server address is correct. (See Changing
the address.)
c Try sending the test message again.
Managing the Email List
This section describes how to:
● Add an email recipient, see page 113.
● Modify an email recipient’s information, see below.
● Remove an email recipient, see page 116.
Modifying a Recipient’s Information
If a recipient’s email address changes, or if you need to change the types
of event notifications the recipient receives, you can update the
recipient’s information in the Email List.
To modify a recipient’s information:
1 Open the Email Notification Manager. (See page 111.)
2 Click on the recipient’s name.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
●
116
3 Modify the recipient’s information as required, then click OK.
Removing a Recipient from the Email List
You can remove any recipient from the Email List. Once a recipient has
been removed, event notifications from the local system are no longer
sent to that email address.
To remove a recipient from the Email List:
1 Open the Email Notification Manager. (See page 111.)
2 Click on the recipient you want to remove.
3 In the tool bar, click Delete email recipient.
4 Click Yes to confirm the deletion.
The recipient is removed from the Email List.
Monitoring and Managing the Email Log
The Email Log displays status information and messages about the
Email Notification Manager itself, such as whether email notifications
were sent successfully or not.
This section explains how to:
● Use the Email Log (see page 117).
● Find the Email Log files (see page 117).
● Clear the Email Log (see page 117).
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
Using the Email Log
●
117
By default, email events are listed in the order they occurred, with the
most recent event first. To make it easier to find a specific event, click on
the column heads to sort events. You can also reorganize the column by
clicking and dragging the column heads (see the Figure on page 105).
Double-click on an event to see basic information about the event,
including the event type. (See page 116 for a list of event types.) Click
Next to see the next event in the list.
Finding the Email Log Files
In addition to appearing in the Email Log, event notifications are saved
in a log file named raidsmtp.log, which can be found in the top-level
Adaptec Storage Manager folder.
The raidsmtp.log file has a maximum capacity of 200 kilobytes (KBs).
When the capacity is exceeded, old events are copied into a file named
raidsmtp.old, and a new raidsmtp.log file is created. If a raidsmtp.old
already exists, it is overwritten.
Clearing the Email Log
To make it easier to monitor recent events, you can clear the Email Log.
Note: Clearing the Email Log doesn’t erase the existing raidsmtp.log file
(see above).
To clear the Email Log:
1 Open the Email Notification Manager. (See page 111.)
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
●
118
2 In the menu bar, select Clear the event log, then click Email
Notifications.
3 Click Yes to clear the log.
The log is cleared, except for one event reporting that the log was
cleared.
Changing the Email Notification Manager Settings
You can modify these Email Notification Manager settings as your
needs change:
● Address of your SMTP server
● ‘From’ address that will appear in email notifications
To modify the Email Notification Manager settings:
1 Open the Email Notification Manager. (See page 111.)
2 In the menu bar, select Actions, then click SMTP server settings.
The SMTP Server Settings window opens.
3 Enter the address of your SMTP server.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
●
119
4 Enter the “From” address to appear in email notifications.
If email recipients will be replying to email notifications, be sure that
the “From” address belongs to a computer that is actively
monitored.
5 Click OK to save the settings.
Disabling Email Notifications
Email notifications are enabled by default, but can be disabled, if
required.
Note: If you disable email notifications, events will be generated but
email notices won’t be broadcast.
To disable email notifications:
1 Open the Email Notification Manager. (See page 111.)
2 In the menu bar, click Actions, then click Disable Email
Notifications.
Email notifications are disabled. The Email
Notifications tab (shown at right) shows the red
‘disabled’ icon.
Re-enabling Email Notifications
To re-enable email notifications, repeat steps 1 and 2 in Disabling Email
Notifications above, selecting Enable Notifications during Step 2.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
●
120
Broadcasting Event Alerts to Users
You can set the Adaptec Storage Manager agent to send event alerts
about a specific system to all users who are logged into your storage
space. You might want to do this if your storage space isn’t managed by
a dedicated person, or if that particular system is off-site or not
storage space that a system requires technical assistance.
When you set Adaptec Storage Manager to broadcast event alerts, all
logged-in users receive messages about all types of events. In Windows,
these alerts appear as pop-up messages; in all other operating systems,
these alerts appear as console messages.
When enabled, event alerts occur independent of event notifications
(see page 103) and email notifications (see page 111).
To enable event alerts:
1 On the tool bar, click the Configure button, select the system you
want, then click General Settings.
The Adaptec Storage Manager Agent General Settings window opens
for that system.
2 Select Broadcast events to logged-in users, then click Save changes.
3 Restart Adaptec Storage Manager to apply the change.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
●
121
Silencing and Testing the Audible Alarm
By default, when a Warning- or Error-level event (see page 101) occurs
on any system in the Enterprise View, an audible alarm is triggered on
the local system. The alarm is a series of beeps, which sound every five
minutes until the event is resolved.
You can change the frequency and duration of the alarm, or choose to
disable the alarm on any system. See Changing a System’s Audible Alarm
Settings on page 67 for more information.
This section describes how to:
● Ensure the alarm is working on your local system (see below).
● Silence a sounding alarm (see page 122).
● Disable the alarm for a selected controller (see page 122).
Testing the Alarm
To test the audible alarm to ensure that it’s working on your local
system:
1 Ensure that the speakers on your local system aren’t muted.
2 In the Enterprise View, click on any controller.
3 In the menu bar, click Actions, select Alarm Actions, then click Test
alarm.
The alarm sounds.
4 To stop the test, click OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11: Monitoring Your Storage Space
●
122
Silencing the Alarm
When a Warning- or Error-level event occurs, you can silence the alarm
on your local system while you fix the problem.
To silence the alarm, click the Silence button (shown at
right) in the main Adaptec Storage Manager window.
Disabling a Controller’s Alarm
You can disable the alarm for a selected controller, if required.
Caution: If you disable the alarm, no audible signal will sound
when a Warning- or Error-level event occurs on the controller.
!
1 In the Enterprise View, click on the controller you want.
2 In the menu bar, click Actions, select Alarm Actions, then click
Silence alarm.
The alarm is disabled for that controller.
Viewing Component Properties
Click on any component in the main window of Adaptec
Storage Manager, then click the Properties button (shown
at right) to view version numbers, status, model numbers, and other
information about that component.
The properties listed vary, depending on which type of component you
selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
In this chapter...
Scheduling a Task.............................................................................124
Opening the Task Manager .............................................................126
Monitoring Tasks .............................................................................127
Modifying a Task..............................................................................129
Deleting a Task.................................................................................130
Disabling the Task Manager ............................................................131
Adaptec Storage Manager allows you to schedule some types of jobs (or
tasks) to complete at convenient times. Additionally, you can schedule
some tasks to recur at preset times.
A Task Manager utility helps you manage the tasks you schedule.
This chapter describes how to schedule, monitor, and manage tasks.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 12: Managing Tasks
●
124
Scheduling a Task
If a task is lengthy and limits access to components on your storage
space, you may want to set a date and time for the task to complete,
instead of running the task while there is activity on your storage space.
If a task must be performed regularly, you can schedule it to recur at
preset times.
You can schedule these Adaptec Storage Manager tasks:
● Expanding a logical drive
● Changing a logical drive’s RAID level
● Modifying the stripe size of a logical drive
● Verifying a logical drive
● Verifying and fixing a logical drive
To schedule one of these tasks:
1 Complete each step of the task until you are prompted to click
Apply. (Don’t click Apply.)
Schedule button
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 12: Managing Tasks
●
125
2 Click Schedule.
The schedule window opens. (The window you see may be different
from the one shown in this example, depending on which type of
task you are scheduling.)
3 Set the date and time for the task.
Note: Keep geography in mind—If you are scheduling tasks on
remote systems located in other geographical areas, remember that
the time you set for a scheduled task is that system’s time, which may
be different from local time. You will be prompted to select a new
time if the one you’ve set occurs in the past on the remote system.
4 Set the recurrence frequency, if the option is available for this task
and you want it to occur regularly.
5 Click Apply.
The task is saved in the Task Manager, and the scheduled task is
added to the Task List. For more information about the Task
Manager, see page 126.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 12: Managing Tasks
●
126
Opening the Task Manager
You can use the Task Manager to monitor and modify the tasks you
have scheduled. (To schedule a task, see page 124.)
Tasks are associated with systems. When you open the Task Manager,
you see the scheduled tasks associated with that local or remote system
only.
To open the Task Manager, in the tool bar, click Configure, select the
system you want, then click Tasks.
The Task Manager opens on the Tasks tab of a new window. The Tasks
tab has two main panels, as shown below:
Tasks Tab
Task List
Task Event Log
Note: From the Tasks tab, you can access other utilities in this window,
such as the Email Notification Manager (see page 111), by clicking their
tabs.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 12: Managing Tasks
●
127
Monitoring Tasks
Use the two main panels of the Task Manager to monitor your tasks:
● Monitor upcoming tasks in the Task List (see below)
●
Check past tasks and task events in the Task Event Log (see page 127)
Monitoring Upcoming Tasks in the Task List
The Task List displays all scheduled tasks in order of creation, and
includes basic information about each task. Although you can’t sort the
tasks in any other order, you can reorganize the columns in the Task List
by clicking and dragging the column heads (see the Figure on page 105).
The Status column of the Task List shows the current condition of each
task:
● Scheduled—The task is scheduled to be completed at a future date
and time.
● Executed—The task has been completed successfully.
● Executed*—A recurring task has been completed once and will be
repeated at the scheduled time.
● Error—The task has not been completed successfully. (For more
information about an error, double-click the task in the Task List to
open the Task Properties window.)
Checking Past Tasks and Events in the Event Log
itself, such as when scheduled events were modified, deleted, or
completed successfully.
By default, task events are listed in the order they occurred, with the
most recent event first. To make it easier to find a specific event, click on
the column heads to sort task events. You can also reorganize the
columns by clicking and dragging the column heads (see the Figure on
page 105).
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 12: Managing Tasks
●
128
The Event Log uses icons to show the status of past tasks:
Icon Status
Explanation and Solution
Information The task or event completed successfully. No action
required.
Warning
The task missed its start time. Reschedule the task to
clear the error, as described in Modifying a Task on
page 129.
Error
The task failed. Delete the task to clear the error.
Schedule the task again, as described in Scheduling a
Task on page 124.)
Double-click on an event to see basic information about the event.
Click Next to see the next event in the list.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 12: Managing Tasks
●
129
Modifying a Task
If your requirements change, you can reschedule a task to a different
date or time. You can also modify the task description that appears in
the Task List. Creating a custom task description makes it easier to find
the task in the Task List.
To modify a scheduled task:
1 In the tool bar, click Configure, select the system you want, then
click Tasks (as shown on page 126).
2 In the Task Manager, select the task you want to change, then click
Modify task.
3 In the Modify Task window, make the required changes, then click
OK.
The task and Task List are updated with the new information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 12: Managing Tasks
●
130
Tasks scheduled in Adaptec Storage Manager include an automatic 30-
minute grace period following their start time, to accommodate
temporary interruptions. For instance, if there’s a brief power outage a
task will run once normal conditions resume, if the interruption lasts
no longer than 30 minutes past the scheduled start time.
If a task misses its start time, it must be rescheduled. For instructions,
see Modifying a Task on page 129.
If a recurring task misses its start time, it is automatically rescheduled to
run at the next scheduled interval.
Deleting a Task
If a scheduled task is no longer required, you can delete it from the Task
Manager.
To delete a task:
1 In the tool bar, click Configure, select the system associated with the
task you want to delete, then click Tasks (as shown on page 126).
2 In the Task Manager, select the task you want to delete, then click
Delete task.
3 Click Yes to confirm the deletion.
The task is deleted.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 12: Managing Tasks
●
131
Disabling the Task Manager
The Task Manager is enabled by default. If you do not wish to schedule
tasks on a selected system, you can disable it.
Note: If you disable the Task Manager, no scheduled tasks will run on
that system.
To disable the Task Manager:
1
In the tool bar, click Configure, select the system whose Task Manager
you want to disable, then click Tasks (as shown on page 126).
2 In the menu bar, click Actions, then click Disable Task Scheduler.
The Task Manager is disabled. The Tasks tab (shown at
right) shows the red ‘disabled’ icon.
Note: When the Task Manager is disabled, a brief three-tone alert
sounds each time you open and log in to Adaptec Storage Manager.
Scheduled tasks in the Task List will not run while the Task Manager is
disabled.
Re-enabling the Task Manager
To re-enable the Task Manager, repeat the steps in Disabling the Task
Manager on page 131, selecting Enable Task Scheduler during Step 2.
Scheduled tasks that have missed their start times must be rescheduled
if you want them to run. See Modifying a Task on page 129 for
instructions.
Scheduled tasks that did not miss their start time while the Task
Manager was disabled will run as scheduled.
Download from Www.Somanuals.com. All Manuals Search And Download.
Systems
In this chapter...
Introduction.....................................................................................133
Removing a Remote System ............................................................133
This chapter describes how to work with and manage remote systems
using Adaptec Storage Manager.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 13: Managing Remote Systems
●
133
Introduction
To manage remote systems, you must log in to them from the local
Storage Manager must be installed and running on a remote system
before you can log in to it.
Once you have logged in to a remote system, you can work with its
controllers, disk drives, and logical drives as if they were part of your
local system. You must log in with the proper permission level to
complete the tasks you wish to perform. (See Understanding Permission
Levels on page 35 for more information.)
Removing a Remote System
If you no longer want to monitor a remote system, you can remove it
from the Enterprise View of Adaptec Storage Manager.
Removing a remote system does not cause it to fail.
To remove a remote system:
1 In the menu bar of the main window, select Remote, select Remove
managed system, then click the system you want to remove.
The Remove Managed System window opens.
2 If you want to continue receiving events from the remote system
after it’s been removed from the local system, select Continue to
receive events from the remote system from the drop-down menu.
3 Click OK.
The remote system is removed from the Enterprise View of Adaptec
Storage Manager.
Download from Www.Somanuals.com. All Manuals Search And Download.
Groups
In this chapter...
Adding a System to a Display Group ..............................................135
Viewing Display Group Status ........................................................136
Removing a System from a Display Group.....................................136
Moving a System from One Display Group to Another ................137
Renaming a Display Group .............................................................137
Deleting a Display Group ................................................................138
This chapter describes how to work with and manage display groups in
Adaptec Storage Manager.
To create display groups, see Creating Display Groups on page 63.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 14: Working with Display Groups
●
135
Adding a System to a Display Group
As your storage space grows and changes, you can add new systems to
your display groups.
To add a system to a display group:
1 Right-click on the system in the Enterprise View.
2 Select Change display group, then click the display group name.
The system is added to the display group.
Note: A system can belong to only one display group at a time; you
can’t include the same system in multiple display groups.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 14: Working with Display Groups
●
136
Viewing Display Group Status
To quickly view the status of systems within a display group, you can
open the display group Properties window.
To view display group status, right-click on the system in the Enterprise
View, then click Properties. The Properties window opens for that
display group, summarizing the status of the systems that belong to that
group.
Removing a System from a Display Group
To remove a system from a display group:
1 In the Enterprise View, right-click the system you want to remove.
2 Select Change display group, then click None.
The system is removed from the display group.
Note: Systems that are not part of display groups are listed at the top
of the Enterprise View, above any display groups.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 14: Working with Display Groups
●
137
Moving a System from One Display Group to
Another
To move a system from one display group to another:
1 In the Enterprise View, right-click the system you want to remove.
2 Select Change display group, then click the name of the display
group you want.
The system moves to its new display group.
Renaming a Display Group
You can make managing your storage space easier and more efficient by
giving your display groups meaningful names.
To rename a display group:
1 In the Enterprise View, right-click on the display group, then click
Rename display group.
2 Enter a new name for the display group, then click OK.
The Enterprise View shows the new name of the display group.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 14: Working with Display Groups
●
138
Deleting a Display Group
If required, you can delete a display group. When you delete the display
group, the systems that belonged to it are listed at the top of the
Enterprise View, above any remaining display groups.
To delete a display group:
1 In the Enterprise View, right-click on the display group.
2 Click Delete display group.
The display group is deleted and the systems that belonged to it are
no longer grouped together in the Enterprise View.
Download from Www.Somanuals.com. All Manuals Search And Download.
In this chapter...
Rescanning a Controller ..................................................................140
Registering New Controllers ...........................................................140
Viewing Controller Properties ........................................................141
Saving Your Controller Configuration ...........................................141
Updating Controller BIOS and Firmware ......................................142
Setting a Disk Drive to ‘Failed’........................................................144
Replacing Disk Drives in a Logical Drive .......................................145
This chapter describes how to manage the RAID controllers in your
storage space.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 15: Managing Controllers and Disk Drives
●
140
Rescanning a Controller
After you connect a disk drive to or remove a ‘Ready’ (non-failed) disk
drive from a controller, Adaptec Storage Manager may not recognize
the change until it rescans the controller.
To rescan a controller:
1 In the Enterprise View, click the controller.
2 In the menu bar, select Actions, then click Rescan.
Adaptec Storage Manager scans all the channels or ports on the
controller you selected.
When the scan is complete, a report appears.
3 Click Done after you have reviewed the scan report.
Registering New Controllers
When you log in to Adaptec Storage Manager, it searches for new
controllers in your storage space. If it detects a new controller, you are
prompted to register it.
To stay informed about Adaptec products and special offers, register
your controllers by clicking Register Now.
Follow the on-screen instructions to complete the registration.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 15: Managing Controllers and Disk Drives
●
141
Viewing Controller Properties
You can open a Properties window for any controller in your storage
space to view model and status information, including the firmware
version number.
To view controller properties:
1 In the Enterprise View, click the controller.
2 In the menu bar, select Actions, then click Properties.
The Properties window for the controller opens.
3 Click the tabs to view all available information.
4 Click the X in the upper-right corner to close the window.
Saving Your Controller Configuration
If you require a record of your controller configurations, you can use
Adaptec Storage Manager to create a text file with this information
about all controllers on a selected system:
● Controllers
● Disk drives
● Disk drives used in logical drives
● Logical drives
To save a system’s controller configurations:
1 In the Enterprise View, click the local or remote system.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 15: Managing Controllers and Disk Drives
●
142
2 In the menu bar, select Actions, then click Save printable
configuration.
3 In the Save window, browse to the directory you want, then enter a
file name for the report. (The default directory is the directory in
which the Adaptec Storage Manager is installed. The default file
name is RaidCfg.log.)
A text-file report is saved.
Updating Controller BIOS and Firmware
Note: This task is recommended for advanced users only.
Adaptec Storage Manager provides a wizard to help you update the
BIOS and firmware for the controllers in your storage space. The ROM
Update wizard updates the BIOS and firmware for all controllers of the
same type on local and remote systems. You can update one type of
controller at a time.
Before You Begin
Before you begin, download the latest firmware images from the
Adaptec Web site at www.adaptec.com. Image files typically come in sets
of two or more and have a .ufi file extension.
Updating the Controller BIOS and Firmware
To update the controller firmware:
1 In the Enterprise View, click Managed systems (shown in the Figure
below).
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 15: Managing Controllers and Disk Drives
●
143
2 In the menu bar, select Actions, then click Update controller images.
Managed systems
The ROM Update wizard opens.
3 Click Next.
4 Click Add to browse to the firmware image files you downloaded,
then click Open.
5 In the wizard, click the image files you want, then click Next.
6 Select the controllers you want to update, then click Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 15: Managing Controllers and Disk Drives
●
144
7 Review the update summary, then click Apply.
8 When prompted, click Yes to begin the update.
Caution: Do not power down the controller(s) during the
update.
!
9 When the update is complete, click OK. Then, restart the server(s) to
activate the new firmware images.
Setting a Disk Drive to ‘Failed’
Before you can remove a disk drive from a server, you must set it to a
failed state to protect your data.
Caution: You may lose data or damage your disk drive if you
remove a disk drive without first setting it to a failed state.
!
You can set a disk drive to a failed state if:
● The disk drive is not part of a logical drive, or
● The disk drive is part of a redundant, healthy logical drive
You can’t set a disk drive to a failed state if doing so will take a logical
drive offline.
To set a disk drive to a failed state:
1 In the Physical Devices View, click the disk drive.
2 In the menu bar, select Actions, then click Set drive state to failed.
3 Click Yes to set the drive status to failed.
4 Remove and replace the disk drive.
5 If the logical drive that the disk drive belongs to is failed, see
Recovering from a Disk Drive Failure on page 147.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 15: Managing Controllers and Disk Drives
●
145
Replacing Disk Drives in a Logical Drive
You can replace one or more disk drives in a logical drive. You may want
to do this to upgrade to larger disk drives, or to make disk drive size
uniform across the logical drive.
Caution: If another disk drive in the logical drive fails during
rebuild (see page 151), you may lose data.
!
To replace a disk drive in a logical drive:
1 In the Physical Devices View, click the disk drive you want to replace.
2 Set the drive state to failed. (See page 144.)
3 Remove and replace the disk drive with one of equal or larger size.
4 Wait for the logical drive to rebuild. (See page 151.)
5 Repeat Steps 1 to 4 for all the disk drives you want to replace.
For information about solving disk drive problems, see Recovering from
a Disk Drive Failure on page 147.
Download from Www.Somanuals.com. All Manuals Search And Download.
In this chapter...
Identifying a Failed or Failing Component ....................................147
Recovering from a Disk Drive Failure.............................................147
Rebuilding Logical Drives ...............................................................151
Solving Notification Problems........................................................151
Creating an Archive File ..................................................................152
Troubleshooting Adaptec Storage Manager ...................................152
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 16: Solving Problems
●
147
Identifying a Failed or Failing Component
When your are notified of a Warning- or Error-level event, use Adaptec
Storage Manager’s rapid fault isolation feature to quickly identify the
source of the problem.
For instance, in the example below a disk drive has failed. To find the
failed disk drive, follow the yellow Error icons:
Error is on the local system...
...on Controller 1...
...and both the failed disk drive (marked with red X)
and hot spare (with yellow +) are affected.
Recovering from a Disk Drive Failure
When a disk drive fails for any reason, it is represented in
Adaptec Storage Manager with a red X, as shown at right.
This section explains how to recover when a disk drive fails:
● If the logical drive was protected by a hot spare (see page 148).
● If the logical drive was not protected by a hot spare (see page 149).
● If there is a disk drive failure in more than one logical drive
simultaneously (see page 149).
● If it is a RAID 0 logical drive (see page 149).
●
If multiple disk drives fail within the same logical drive (see page 150).
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 16: Solving Problems
●
148
Failed Disk Drive Protected by a Hot Spare
When a logical drive is protected by a hot spare, if a disk drive in that
logical drive fails the hot spare is automatically incorporated into the
logical drive and takes over for the failed drive.
For instance, when a disk drive fails in the RAID 5 logical drive shown
in the example below, the logical drive is automatically rebuilt (its data
is reconstructed) using the hot spare in place of the failed drive. You
can’t access the logical drive until the rebuilding is complete.
Disk drive shows
Failed status...
...hot spare takes over...
...and logical drive is
rebuilt with hot spare
Note: In the example above, the color of the hot spare changed from
light-blue to dark-blue, showing that it is now part of a logical drive.
To recover from the failure:
1 Remove and replace the failed disk drive (following manufacturer’s
instructions).
the original hot spare (the disk drive that was built into the logical
drive). See page 93 for instructions. Then, designate a new hot spare
to protect the logical drives on that controller.
If copyback is enabled—Data is automatically moved back to its
original location once the controller detects that the failed drive has
been replaced. No action is required. See Enabling Copyback on page
98 for more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 16: Solving Problems
●
149
Failed Disk Drive Not Protected by a Hot Spare
When a logical drive is not protected by a hot spare, if a disk drive in
that logical drive fails, remove and replace the failed disk drive. The
controller detects the new disk drive and begins to rebuild the logical
drive.
If the controller fails to rebuild the logical drive, check that the cables,
disk drives, and controllers are properly installed and connected. Then, if
necessary, follow the instructions in Rebuilding Logical Drives on page 151
.
Failure in Multiple Logical Drives Simultaneously
If there’s a disk drive failure in more than one logical drive at the same
time (one failure per logical drive), and the logical drives have hot
spares protecting them, the controller rebuilds the logical drives with
these limitations:
it’s replacing.
● Failed disk drives are replaced with hot spares in the order in which
first is rebuilt first, assuming an appropriate hot spare is available—
see bullet above.)
If there are more disk drive failures than hot spares, see Failed Disk
Drive Not Protected by a Hot Spare on page 149.
If copyback is enabled, data is moved back to its original location once
the controller detects that the failed drive has been replaced. See
Enabling Copyback on page 98 for more information.
Disk Drive Failure in a RAID 0 Logical Drive
Because RAID 0 volumes do not include redundancy, if a disk drive fails
in a RAID 0 logical drive, the data can’t be recovered.
Correct the cause of the failure or replace the failed disk drives. Then,
restore your data (if available).
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 16: Solving Problems
●
150
Multiple Failures in the Same Logical Drive
Except in RAID 6 and RAID 60 logical drives (see pages 171 and 172), if
the data can’t be recovered.
Correct the cause of the failure or replace the failed disk drives. Then,
restore your data (if available).
Note: In some instances, RAID 10 and RAID 50 logical drives may
survive multiple disk drive failures, depending on which disk drives fail.
See Understanding RAID on page 163 for more information.
Removing a Failed Disk Drive’s Icon
Note: You can only complete this task on disk drives that are not
included in any logical drive.
When a disk drive fails, it may still appear in Adaptec Storage Manager
although it is no longer available. To see an accurate representation of
your storage space and make it easier to monitor your disk drives, you
can remove a failed disk drive from the Physical Devices View.
In the Physical Devices View, right-click the failed disk drive, then click
Remove failed drive.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 16: Solving Problems
●
151
Rebuilding Logical Drives
A hot-swap rebuild occurs when a controller detects that a failed disk
drive in a logical drive has been removed and then reinserted.
To start a hot-swap rebuild:
1 Following manufacturer’s instructions, gently pull the failed disk
drive from the server without fully removing it, then wait for it to
spin down fully before continuing.
2 If there is nothing wrong with the disk drive, reinstall it, following
manufacturer’s instructions.
If necessary, replace the failed disk drive with a new disk drive of
equal or larger size.
3 The controller detects the reinserted (or new) disk drive and begins
to rebuild the logical drive.
Solving Notification Problems
emails to ensure that they’re being received properly.
If your test event fails:
1 Ensure that the remote system is powered on and running Adaptec
Storage Manager.
2 Open the remote system’s System Properties window (see Step 3 on
3 Try sending the test event again.
If your test email fails:
1 Ensure that the recipient’s email address is correct. (See Modifying a
Recipient’s Information on page 115 to modify the address.)
2 Ensure that your SMTP server address is correct. (See Changing the
Email Notification Manager Settings on page 118 to modify the
address.)
3 Try sending the test message again.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 16: Solving Problems
●
152
Creating an Archive File
Your Adaptec Storage Manager service representative might ask you to
create a configuration and status information archive file to help
diagnose a problem with your system.
To create the archive file:
1 In the Enterprise View, click the local or remote system on which the
problem is occurring.
2 In the menu bar, select Actions, then click Save support archive.
3 Enter a name for the archive file or accept the default name, then
click Save.
Troubleshooting Adaptec Storage Manager
If you experience problems installing or using Adaptec Storage
Manager, follow these suggestions:
● Ensure that you are logged in to Adaptec Storage Manager at the
permission level you need to perform the tasks you want. (See page 35
for more information.
)
● Ensure that all managed systems are powered on and that you are
logged in to any remote systems you want to manage. (See page 61
for more information.)
● Check all cable connections.
● Try uninstalling and reinstalling Adaptec Storage Manager.
Download from Www.Somanuals.com. All Manuals Search And Download.
Support
In this appendix...
Configuring SNMP Support on Windows .....................................154
Configuring SNMP Support on Linux ...........................................155
Configuring SNMP Support on NetWare ......................................155
This appendix describes how to configure SNMP support for the
Adaptec Storage Manager software. Adaptec Storage Manager supports
SNMP “gets” and “traps” through the use of an SNMP agent.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Configuring SNMP Support
●
154
Configuring SNMP Support on Windows
Note: Be sure your Windows installation includes SNMP support. By
default, Windows 2000 and Windows XP do not install SNMP.
To install and configure SNMP support:
1
Run the Adaptec Storage Manager installation program (see page 25).
2 When prompted, select Yes, install SNMP support.
3 Follow the on-screen instructions to complete the installation, then
restart your computer.
4 Open the Windows Computer Management tool, then select
Services from the tree.
5 Double-click SNMP Service.
The SNMP Service Properties window opens.
6 Click the Traps tab, then enter the IP address of each computer on
which you want to enable traps.
7 Click OK.
8 Start the SNMP service.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Configuring SNMP Support
●
155
Configuring SNMP Support on Linux
For the Linux operating system, the Adaptec Storage Manager SNMP
agent is a sub-agent that interfaces with the UCD-SNMP agentx
architecture. UCD-SNMP is a third-party package for Linux; for
information, documentation, and downloads, see www.net-snmp.org
.
To configure SNMP support:
1 Install Adaptec Storage Manager (see page 28).
2 Configure the UCD-SNMP master agent to be used with agentx.
3 Start the Adaptec Storage Manager SNMP sub-agent:
From the Adaptec Storage Manager installation directory, run the
aus-snmpd executable.
Refer to your Linux documentation for information on configuring
UCD-SNMP, agentx, and setting up traps.
Configuring SNMP Support on NetWare
To install Adaptec Storage Manager SNMP support, at the command
prompt type this command, then press Enter:
load AUS-SNMP.NLM
Refer to your NetWare documentation for information on configuring
traps.
Download from Www.Somanuals.com. All Manuals Search And Download.
Common Questions...
In this appendix...
How do I...? ......................................................................................157
What’s the difference between...? ....................................................159
This chapter provides quick references to frequently requested
information about basic tasks and concepts in Adaptec Storage
Manager.
Note: For troubleshooting tips, see Solving Problems on page 146.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B: Quick Answers to Common Questions...
●
157
How do I...?
Set up my storage space?
Follow the five steps in the Getting Started Checklist on page 23.
Open the Configuration wizard?
In the Enterprise View, right-click the controller you
want, then click Create logical device. Or, click either
of the buttons shown at right. See page 47.
or
Turn off the alarm?
Click the Silence button, shown at right.
Or, from the menu bar, click Actions, select Alarm actions,
then click Silence alarm. See page 122.
Add a new user to Adaptec Storage Manager?
Adaptec Storage Manager. See page 30.
Add a remote system?
Prevent a user from changing my storage space?
See page 35 for information on restricting access.
Check disk drive or logical drive status?
Hold your cursor over the disk drive or logical drive to reveal status
information. See also page 43.
Access a feature with a padlock icon beside it?
Features such as copyback, snapshot, and some RAID levels are
enhanced features that must be unlocked with a special feature key
(sold separately). See page 21.
Log out of Adaptec Storage Manager?
In the Enterprise View, click on the local system. In the menu bar, select
Actions, then click Log out. See page 38.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B: Quick Answers to Common Questions...
●
158
Schedule a task?
Complete each step of the task until you are prompted to click Apply.
(Don’t click Apply.) Click Schedule. See page 124.
Note: The Schedule button won’t appear on tasks that can’t be
scheduled.
Find the Task Manager?
In the tool bar, click Configure, select the system you want, then click
Tasks. See page 126.
Find the Notification Manager?
In the tool bar, click Configure, select the system you want, then click
Notifications. See page 103.
Find the Email Notification Manager?
In the tool bar, click Configure, select the system you want, then click
Notifications. See page 111.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B: Quick Answers to Common Questions...
●
159
What’s the difference between...?
Adaptec Storage Manager and the agent?
Adaptec Storage Manager is the full software application, including the
build and maintain the logical drives, controllers, and disk drives that
make up your storage space.
The agent is like a service that keeps your storage space running. Its job
is to monitor system health and manage event notifications, tasks
schedules, and other on-going processes on each system in your storage
space. The agent can run independently of the full application.
See page 17 for more information.
Event notifications, email notifications, and event
alerts?
events on one system that are sent to the Event Viewer of another
system in your storage space. (See page 103.)
Email notifications are email messages about events on a system in your
storage space that are sent to specified users. (See page 111.)
Event alerts are pop-up messages or console messages about all types of
events on a specific system, which are broadcast to all the users who are
logged into your storage space. (See page 120.)
Download from Www.Somanuals.com. All Manuals Search And Download.
At-a-Glance
In this appendix...
Icons in the Physical Devices View .................................................161
Icons in the Logical Devices View...................................................161
Buttons in the Physical/Logical Devices Views ..............................162
Buttons on the Main Window Tool Bar..........................................162
This chapter provides quick references to the icons and buttons that
appear in Adaptec Storage Manager.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C: Buttons and Icons At-a-Glance
●
161
Icons in the Physical Devices View
Icon
Descriptions
Ready disk drive
Disk drive with free space
Disk drive with no free space
Failed disk drive
Hot spare with error (see page 93 for more information)
Hot spare being built into logical drive after disk drive failure
Hot spare built into logical drive after disk drive failure
Locked upgrade feature that can be activated with a feature key (see
page 21 for more information)
Icons in the Logical Devices View
Icon
Description
Logical drive
Logical drive with healthy hot spare
Logical drive with a snapshot
Logical drive being initialized
Logical drive being modified
Logical drive being rebuilt after disk drive failure
Locked upgrade feature that can be activated with a feature key (see
page 21 for more information)
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C: Buttons and Icons At-a-Glance
●
162
Buttons in the Physical/Logical Devices Views
Button
Click to...
More on...
...see a text description of your disk drives.
...page 43.
...see the size capacities of your disk drives.
...page 44.
...page 44.
...to see the size capacities of your disk drives
relative to each other.
...to create a global hot spare.
...to create a logical drive.
...to delete a logical drive.
...page 91.
...page 47.
...page 89.
...page 46.
...to expand and collapse additional information
about disk drives and logical drives.
Buttons on the Main Window Tool Bar
Button
Click to...
More on...
...add a remote system.
...page 61.
...create a logical drive; open the
Configuration wizard.
...page 47.
...silence the audible alarm.
...page 121.
...page 122.
...check status and other properties of a
controller, disk drive, or other component.
...view the full Event log.
...page 101.
...page 67.
...configure the Adaptec Storage Manager
agent settings.
...configure notification settings.
...configure email notification settings.
...check the status of scheduled tasks;
monitor and modify scheduled tasks.
...page 103.
...page 111.
...page 123.
...open the online Help.
...page 46.
Download from Www.Somanuals.com. All Manuals Search And Download.
In this appendix...
Understanding Drive Segments ......................................................164
RAID 0 (Non-RAID Logical Drives) ..............................................164
RAID 1 Logical Drives.....................................................................165
RAID 1 Enhanced Logical Drives....................................................166
RAID 10 Logical Drives...................................................................167
RAID 5 Logical Drives.....................................................................168
RAID 5EE Logical Drives ................................................................169
RAID 50 Logical Drives...................................................................170
RAID 6 Logical Drives.....................................................................171
RAID 60 Logical Drives...................................................................172
Selecting the Best RAID Level.........................................................173
When you create logical drives in Adaptec Storage Manager, you can
assign a RAID level to protect your data.
Each RAID level offers a unique combination of performance and
redundancy. RAID levels also vary by the number of disk drives they
support.
This appendix describes the RAID levels supported by Adaptec Storage
Manager, and provides a basic overview of each to help you select the
best level of protection for your storage system.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D: Understanding RAID
●
164
Understanding Drive Segments
A drive segment is a disk drive or portion of a disk drive that is used to
create a logical device. A disk drive can include both RAID segments
(segments that are part of a logical drive) and available segments. Each
segment can be part of only one logical device at a time. If a disk drive is
not part of any logical device, the entire disk is an available segment.
RAID 0 (Non-RAID Logical Drives)
A logical drive with RAID 0 includes two or more disk drives
(maximum twelve) and provides data striping, where data is distributed
evenly across the disk drives in equal-sized sections.
RAID 0 logical drives do not maintain redundant data, so they offer no
data protection. However, compared to an equal-sized group of
independent disks, a RAID 0 logical drive provides improved I/O
performance.
Drive segment size is limited to the size of the smallest disk drive in the
logical drive. For instance, a logical drive with two 250 GB disk drives
and two 400 GB disk drives can create a RAID 0 drive segment of 250
GB, for a total of 1000 GB for the volume, as shown below.
Drive Segment Size (Smallest Disk Drive)
Disk Drive 1
250 GB
Disk Drive 2
250 GB
Disk Drive 1
Disk Drive 2
1
997
5
...
2
3
998
999
Disk Drive 3
6
7
...
...
400 GB
400 GB
Disk Drive 3
Disk Drive 4
Unused Space: 150 GB
Unused Space: 150 GB
Not Used
4
1000
8
...
Disk Drive 4
Not Used
Disk Drives in Logical Drive
RAID 0 Logical Drive = 1000 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D: Understanding RAID
●
165
RAID 1 Logical Drives
A RAID 1 logical drive is built from two disk drives, where one disk
drive is a mirror of the other (the same data is stored on each disk
drive). Compared to independent disk drives, RAID 1 logical drives
provide improved performance, with twice the read rate and an equal
write rate of single disks. However, capacity is only 50 percent of
independent disk drives.
If the RAID 1 logical drive is built from different- sized disk drives, the
free space, drive segment size is the size of the smaller disk drive, as
shown below.
Drive Segment Size (Smaller Disk Drive)
Disk Drive 1
250 GB
Disk Drive 1
Disk Drive 2
1 – 250
1 – 250
Disk Drive 2
400 GB
Unused Space: 150 GB
Not Used
Disk Drives in Logical Drive
RAID 1 Logical Drive = 250 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D: Understanding RAID
●
166
RAID 1 Enhanced Logical Drives
Note: RAID 1E is an upgrade feature; if the RAID 1E feature is locked,
see Adding Enhanced Features on page 21 for information on
purchasing a feature key.
A RAID 1 Enhanced (RAID 1E) logical drive is similar to a RAID 1
logical drive except that data is both mirrored and striped, and more
disk drives can be included. A RAID 1E logical drive can be built from
three or more disk drives—depending on the stripe size, the maximum
number of disk drives ranges from eight to sixteen.
In the example below, the large bold numbers represent the striped
data, and the smaller, non-bold numbers represent the mirrored data
stripes.
Disk Drive 1
400 GB
400 GB
400 GB
Disk Drive 1
Disk Drive 2
1
2
6
4
3
4
5
Disk Drive 2
Disk Drive 3
1
Disk Drive 3
3
5
2
6
Disk Drives in Logical Drive
RAID 1E Logical Drive = 600 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D: Understanding RAID
●
167
RAID 10 Logical Drives
A RAID 10 logical drive is built from two or more equal-sized RAID 1
logical drives. Adaptec RAID controllers support a maximum number
of 48 disk drives in a RAID 10 logical drive.
Data in a RAID 10 logical drive is both striped and mirrored. Mirroring
provides data protection, and striping improves performance.
Drive segment size is limited to the size of the smallest disk drive in the
logical drive. For instance, a logical drive with two 250 GB disk drives
and two 400 GB disk drives can create two mirrored drive segments of
250 GB, for a total of 500 GB for the logical drive, as shown below.
Drive Segment Size (Smallest Disk Drive)
Disk Drive 1
250 GB
250 GB
Disk Drive 2
Disk Drive 1
1
499
3
...
Disk Drive 2
Disk Drive 3
2
1
500
499
Disk Drive 3
4
3
...
...
400 GB
Unused Space: 150 GB
Unused Space: 150 GB
Not Used
2
500
Disk Drive 4
4
...
Disk Drive 4
400 GB
Not Used
Disk Drives in Logical Drive
RAID 10 Logical Drive = 500 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D: Understanding RAID
●
168
RAID 5 Logical Drives
A RAID 5 logical drive is built from a minimum of three and a
maximum of sixteen disk drives, and uses data striping and parity (see
below) data to provide redundancy. Parity data provides data
protection, and striping improves performance.
Parity data is an error-correcting redundancy that’s used to re-create
data if a disk drive fails. In RAID 5 logical drives, parity data
(represented by Ps in the example below) is striped evenly across the
disk drives with the stored data.
Drive segment size is limited to the size of the smallest disk drive in the
logical drive. For instance, a logical drive with two 250 GB disk drives
and two 400 GB disk drives can contain 750 GB of stored data and 250
GB of parity data, as shown below.
Drive Segment Size (Smallest Disk Drive)
Disk Drive 1
Disk Drive 2
250 GB
250 GB
Disk Drive 1
1
4
...
P
Disk Drive 2
Disk Drive 3
2
3
5
... 748
... 749
Disk Drive 3
Disk Drive 4
400 GB
400 GB
P
Unused Space: 150 GB
Unused Space: 150 GB
Not Used
Disk Drive 4
P
6
... 750
Not Used
Disk Drives in Logical Drive
RAID 5 Logical Drive = 750 GB plus Parity
In the example above, P represents the distributed parity data.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D: Understanding RAID
●
169
RAID 5EE Logical Drives
Note: RAID 5EE is an upgrade feature; if the RAID 5EE feature is
purchasing a feature key.
A RAID 5EE logical drive is similar to a RAID 5 logical drive except that
it includes a distributed spare drive (see below) and must be built from a
minimum of four disk drives. The maximum number of disk drives is
sixteen.
Unlike a hot spare (see page 90), a distributed spare is striped evenly
across the disk drives with the stored data and parity data, and can’t be
shared with other logical disk drives. A distributed spare improves the
speed at which the logical drive is rebuilt following a disk drive failure.
A RAID 5EE logical drive protects your data and increases read and
write speeds. However, capacity is reduced by two disk drives’ worth of
space, which is for parity data and spare data.
In the example below, S represents the distributed spare, P represents
the distributed parity data.
Drive Segment Size (Smallest Disk Drive)
Disk Drive 1
250 GB
Disk Drive 2
250 GB
Disk Drive 1
1
S
P
...
P
Disk Drive 2
Disk Drive 3
2
... 449
Disk Drive 3
Disk Drive 4
400 GB
400 GB
S
3
...
Not Used
... 500
Not Used
S
Unused Space: 150 GB
Unused Space: 150 GB
Disk Drive 4
P
4
Disk Drives in Logical Drive
RAID 5EE Logical Drive = 500 GB plus Parity and Spare
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D: Understanding RAID
●
170
RAID 50 Logical Drives
A RAID 50 logical drive is built from six to forty-eight disk drives
configured as two ore more RAID 5 logical drives, and stripes stored
data and parity data across all disk drives in both RAID 5 logical drives.
(For more information, see RAID 5 Logical Drives on page 168.)
The parity data provides data protection, and striping improves
performance. RAID 50 logical drives also provide high data transfer
speeds.
Drive segment size is limited to the size of the smallest disk drive in the
logical drive. For example, three 250 GB disk drives and three 400 GB
disk drives comprise two equal-sized RAID 5 logical drives with 500 GB
of stored data and 250 GB of parity data. The RAID 50 logical drive can
therefore contain 1000 GB (2 x 500 GB) of stored data and 500 GB of
parity data.
RAID 50 Logical Drive = 1000 GB plus Parity
500 GB Data Storage each
RAID 5
A
RAID 5
B
250 GB Parity Data each
1, 5, P
3, P, 9
P, 7, 11
2, 6, P
4, P, 10
Drive 5
P, 8, 12
Drive 6
Total Unused
Space = 450 GB
Drive 1
250 GB
Drive 2
250 GB
Drive 3
250 GB
Drive 4
400 GB
400 GB 400 GB
In the example above, P represents the distributed parity data.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D: Understanding RAID
●
171
RAID 6 Logical Drives
Note: RAID 1E is an upgrade feature; if the RAID 1E feature is locked,
see Adding Enhanced Features on page 21 for information on
purchasing a feature key.
A RAID 6 logical drive is similar to a RAID 5 logical drive because it
uses data striping and parity data to provide redundancy. However,
RAID 6 logical drives include two independent sets of parity data
instead of one. Both sets of parity data are striped separately across all
disk drives in the logical drive.
RAID 6 logical drives provide extra protection for your data because
they can recover from two simultaneous disk drive failures. However,
the extra parity calculation slows performance (compared to RAID 5
logical drives).
RAID 6 logical drives must be built from four or more disk drives, to a
maximum of sixteen. Maximum stripe size depends on the number of
disk drives in the logical drive.
Drive Segment Size (Smallest Disk Drive)
Disk Drive 1
250 GB
Disk Drive 2
250 GB
Disk Drive 1
Disk Drive 2
1
2
P1 ... P2
P2 ... 449
Disk Drive 3
Disk Drive 4
400 GB
400 GB
Disk Drive 3 P1
Disk Drive 4 P2
3
... P1
Unused Space: 150 GB
Unused Space: 150 GB
Not Used
4
... 500
Not Used
Disk Drives in Logical Drive
RAID 6 Logical Drive = 500 GB plus Parity (P1 & P2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D: Understanding RAID
●
172
RAID 60 Logical Drives
Note: RAID 1E is an upgrade feature; if the RAID 1E feature is locked,
see Adding Enhanced Features on page 21 for information on
purchasing a feature key.
Similar to a RAID 50 logical drive (see page 170), a RAID 60 logical
drive is built from eight disk drives configured as two or more RAID 6
logical drives, and stripes stored data and two sets of parity data across
all disk drives in both RAID 6 logical drives.
Two sets of parity data provide enhanced data protection, and striping
improves performance. RAID 60 logical drives also provide high data
transfer speeds.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D: Understanding RAID
●
173
Selecting the Best RAID Level
Use the Table below to select the RAID levels that are most appropriate for the logical drives on your storage space,
based on the number of available disk drives and your requirements for performance and reliability.
Disk Drive
Usage
Read
Write
Built-in Hot
Spare
Minimum
Disk Drives
RAID level
RAID 0
Redundancy
No
Performance Performance
ŠŠŠ
ŠŠ
ŠŠŠ
ŠŠ
ŠŠ
ŠŠ
Š
No
No
No
No
No
Yes
No
No
No
No
No
1
2
3
4
3
4
6
4
8
2
4
100%
50%
RAID 1
Yes
RAID 1E
RAID 10
Yes
50%
ŠŠ
Yes
50%
ŠŠ
RAID 5
Yes
67 – 94%
50 – 88%
67 – 94%
50 – 88%
50 – 88%
100%
ŠŠŠ
ŠŠŠ
ŠŠŠ
ŠŠ
RAID 5EE
RAID 50
Yes
Š
Yes
Š
RAID 6
Yes
Š
RAID 60
Yes
ŠŠ
Š
Spanned Volume
RAID Volume
No
ŠŠŠ
ŠŠŠ
ŠŠŠ
ŠŠŠ
No
50 – 100%
Disk drive usage, read performance, and write performance depend on the number of drives in the logical drive. In
general, the more drives, the better the performance.
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
A
Adaptec Storage Manager agent
Runs in the background on your computer, monitoring and managing
event notifications, tasks schedules, and other on-going processes in
your storage space. It requires no user intervention and includes no
user interface.
available space
Space on a disk drive that is not being used by a logical drive. When a
logical drive is deleted, its space becomes available. See also logical drive.
B
background consistency check
A controller function that continually and automatically verifies your
logical drives once they’re in use.
bootable-CD mode
A way of running Adaptec Storage Manager, where the application is
not installed but is run directly from a CD.
C
cache
A temporary, fast storage area that holds data from a slower storage
device for quick access. Cache storage is normally transparent to the
accessing device.
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
●
channel
Any path used for the transfer of data and the control of information
between disk drives and a RAID controller.
controller
A hardware device that interprets signals between a host and a disk
drive. Also known as an adapter or card. See also I/O.
copyback
to a hot spare to be returned to its original location once the controller
detects that the failed drive has been replaced.
D
DAS
Direct-attached Storage. Data storage that is physically connected to a
server. See also LAN, SAN.
drive segment
See segment.
E
Email Notification Manager
A utility within Adaptec Storage Manager that emails event messages to
selected recipients. See also email notifications, Notification Manager.
email notifications
Event messages about remote systems that are emailed to selected
recipients.
event
Activity on your storage space, such as a disk drive failure or logical
drive verification.
F
fault tolerance
The ability of a system to continue to perform its functions even when
one or more disk drives have failed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
●
176
firmware
A combination of hardware and software; software written onto read-
only memory (ROM).
format
See initialize.
G
GB
GigaByte. 1,024 MB. See also MB.
H
host
A computer that’s connected to a TCP/IP network. See also TCP/IP.
host bus adapter (HBA)
An adapter card that includes all of the I/O logic, software, and
processing to manage the transfer of information between the host and
the devices it’s connected to.
hot spare
A spare disk drive which will automatically replace a failed disk drive in
a logical drive.
hot-swap
Remove and replace a failed disk drive in a logical drive without
shutting down the server or disrupting activity on the logical drive.
I
initialize
Prepare a disk drive for reading and writing.
I/ O
Input/Output. Data entering into or being extracted from a computer.
L
LAN
Local Area Network. A network of interconnected workstations sharing
the resources of a single server, typically within the area of a small office
building.
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
LED
Light-emitting Diode. An electronic device that lights up when
powered.
local system
The computer that you’re working on. In Adaptec Storage Manager,
‘local’ and ‘remote’ are relative terms. See also remote system.
logged notifications
Event messages about remote systems that appear in the Event Viewer
of Adaptec Storage Manager. See also Notification Manager.
logical drive
One or more disk drives grouped together to appear as a single device to
a computer. Also known as a logical device or array.
M
managed system
Adaptec Storage Manager.
MB
MegaByte. Depending on context, 1,000,000 or 1,048,576 bytes. Also
1000 KB.
mirroring
Data protection that duplicates all data from one drive onto a second
drive. See also RAID.
N
Notification Manager
A utility within Adaptec Storage Manager that broadcasts event
messages to selected managed systems.
P
parity
A form of data protection used by some RAID levels to recreate the data
of a failed disk drive in a logical drive. See also RAID.
partition
Divides the space of a disk drive into isolated sections.
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
●
178
port
other device.
R
RAID
Redundant Array of Independent Disks. For more information on
RAID and all supported RAID levels, see Understanding RAID on page
163.
rapid fault isolation
The trail of yellow or red warning icons that leads from the high-level
system view to the failed or failing component.
rebuild
Re-create a logical drive after a disk drive failure.
recurring task
A scheduled task, such as logical drive verification, that occurs on a
redundancy
The capability of preventing data loss if a disk drive fails. See also
mirroring, parity.
remote system
In Adaptec Storage Manager, all other computers in your storage space
besides your local system are remote systems. ‘Local’ and ‘remote’ are
relative terms. See also local system.
ROM Update wizard
A program that updates the BIOS and firmware codes on the controller.
See also firmware.
S
SAN
Storage Area Network. A storage architecture that connects servers and
disk drives across a network for enhanced reliability, scalability, and
performance.
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
●
179
scheduled task
Activity, such as logical drive verification, that is set to be completed at
a specified date and time. See also recurring task.
segment
Disk drive space that has been assigned to a logical drive. A segment can
SMTP
Simple Mail Transfer Protocol.
snapshot
A frozen image of a logical drive at a particular point in time.
spare
See hot spare.
storage space
The controller(s) and disk drives being managed with Adaptec Storage
Manager.
stripe size
Amount of data written to one partition before the controller moves to
the next partition in a stripe set.
striping
multiple disk drives. Provides no data protection.
T
Task Manager
A utility in Adaptec Storage Manager that allows you to schedule
specific activity, such as expanding a logical drive, for a time that’s
convenient. See also scheduled task, recurring task.
TB
TeraByte. Approximately one million-million bytes, or 1024 GB.
TCP/ IP
Transmission Control Protocol/Internet Protocol. A set of
communication protocols used to connect hosts on the Internet.
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
●
180
V
verify
Check a logical drive for inconsistent or bad data. May also fix any data
problems or parity errors.
Download from Www.Somanuals.com. All Manuals Search And Download.
A
Set drive state to failed 144
Update controller images 143
Actions menu 46
Agent actions
email notifications 114
event log 102
notifications 106
Alarm Actions 121, 122
Configure read cache 80
Configure write cache 79
Create dedicated hot-spare drive
for 92
Delete dedicated hot-spare
drive 94
Delete hot-spare drive 94
Delete logical device 89
description 46
Disable Email Notifications 119
Disable notifications 111
Disable Task Scheduler 131
Enable (Disable) background
consistency check 84
Expand or change logical device
78, 85, 87
3
agent 17
agent port number 69
bootable-CD mode 71
logging into remote systems 62
main window 40
operating systems 18
remote systems 61
standard unit of measure 66
system requirements 18
Task Manager 126
Log in 38
Log out 38
Properties (controller) 141
Rescan 140
Save printable configuration 142
Save support archive 152
Send test event 106
unlocking enhanced features 22
Download from Www.Somanuals.com. All Manuals Search And Download.
●
182
adapters. See controllers
ADDLOCAL 26
Administrator permissions 35
advanced settings 53, 78
agent 17
alarm settings 67
broadcast event alerts 67
customizing 67
event log 69
introduction 17
Linux 34
NetWare 34
port number 69
Windows 33
C
window 101
space
Configure button 104
configuring (defined) 48
alarm
changing settings 67
disabling 67
disabling (controller-level) 122
duration 67
frequency 67
silencing 122
testing 121
registering 140
archive file 152
audible alarm. See alarm
automatic verification 81
Copyback 98
B
background consistency check 81,
84
background verification 81
base port number 69
customer support
boards. See controllers
bootable-CD mode 70 to 72
broadcasting event alerts 120
Build (initialize method) 80
building storage space
bootable-CD mode 71
custom configuration 51
express configuration 48
express RAID levels 48
D
daemon 17
dedicated hot spares 90
creating 92
deleting logical drives 89
devices 41
disk drive segments 164
disk drives
available space 42
Download from Www.Somanuals.com. All Manuals Search And Download.
●
183
conceptual graphic 74
different sizes in same logical
drive 76
log files 117
failed state 144
failure recovery
multiple disk drives 150
multiple logical drives 149
RAID 0 logical drives 149
with hot spare 148
without hot spare 149
in logical drives 53
relative capacity 44
replacing in logical drives 145
segments in logical drive 77
text descriptions 43
viewing logical drives 43
viewing status 42
removing users 116
sending test emails 114
SMTP server settings 113
display groups 63
adding systems 135
creating 63
deleting 138
moving systems 137
removing systems 136
renaming display groups 137
system status 136
Error 127
distributed spare drives 169
E
Event Notification Manager
adding systems 104
Event Viewer 103, 159
failed test events 107
introduction 103
Email event detail window 117
Email List 112, 115
adding users 113
modifying users 115
removing users 116
sending test emails 114
Email Log 112, 116
clearing 117
Email Log files 117
Email Notification Manager 111
clearing the Email Log 117
disabling 119
logged notifications 103
modifying systems 107
Notification List 105
Notification Log 109
Email List 115
Download from Www.Somanuals.com. All Manuals Search And Download.
●
184
removing systems 108
sending test events 106
sources of events 103
Event Viewer 45, 101
event notifications 103, 159
logged notification status 109
logged notifications 103
main window 40
dedicated 90
sources of events 103
status icons 102
limitations 90
events 45
removing 93
sources 103
status icons 102, 109
Events button 101
expanding logical drives 84
express configuration
RAID levels 48
I
icons 161
F
failed disk drives
multiple disk drives 150
multiple logical drives 149
RAID 0 logical drives 149
without hot spare 149
FAQs 156
J
feature keys 21
unlocking 22
firmware 142
formatting logical drives 50
Full Size Capacity View 44
L
Linux
controller support 59
Manager 28
SNMP support 155
starting Adaptec Storage
Manager 32
G
global hot spares 90
glossary 174
Guest permissions 36
starting agent 34
local systems 61
locked features 21
unlocking 22
H
hard disk, hard disk drive, hard
Download from Www.Somanuals.com. All Manuals Search And Download.
●
185
log files
clearing 110, 117
Email Notification Manager 117
Notification Manager 110
logged notifications. See event
notifications
logging in 38
Administrator 35
Guest 36
User 36
logging out 38
logging back in 38
RAID 10 167
Logical Devices View 40, 42
buttons 162
RAID 1E 166
icons 161
RAID 50 170
logical devices. See logical drives
logical drives 42, 73 to 90
advanced settings 53, 78
automatic verification 81
available space on disk drives 76
background consistency check
81
read cache 80
background verification 81
building (advanced) 51
building (basic) 48
changing RAID levels 87
custom configuration 51
definition 74, 148
rebuilding 151
selecting disk drives 53
deleting 89
different-sized disk drives 76
disabling background
consistency check 84
disk drive segments 77, 164
distributed spare drives 169
enabling background
consistency check 84
expanding 84
size 53
striping data 164
verifying 81, 83
verifying and fixing 82
verifying icon 84
viewing disk drives 43
viewing status 42
write cache setting 79
extending partitions 87
fine-tuning 78 to 81
formatting 50
Download from Www.Somanuals.com. All Manuals Search And Download.
●
186
status icons 109
disabling 111
M
main window 40
display options 66
Enterprise View 40
Event Viewer 40
Logical Devices View 40
menu bar 40
Physical Devices View 40
status bar 40
tool bar 40
opening 104
re-enabling 111
manual verification 81
mirroring 165
monitoring
clearing event log 102
component properties 122
Email Notification Manager 111
email notifications 111
event notifications 103
full event log 101
email notifications 103, 111
event alerts 120
event notifications 103
introduction 100
Notifications tab 104
Notification Manager 103
status icons 102, 109
tasks 127
O
online help 46
NetWare 32
Windows 31
N
NetWare
controller support 59
installing Adaptec Storage
Manager 29
SNMP support 155
starting Adaptec Storage
Manager 32
P
parity 168
starting agent 34
partitioning logical drives 50
partitions 87
permission level
Administrator 35
Guest 36
non-RAID logical drives 164
Notification event detail
window 109
Notification List 104, 105
adding systems 104
modifying systems 107
User 36
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
●
187
Physical Devices View 40, 41
buttons 162
rebuilding (defined) 148
rebuilding logical drives 151
recurring tasks 124
icons 161
port number 69
Properties button 122
registering new controllers 140
Q
Quick (initialize method) 80
R
RAID
distributed spare drives 169
mirrored data 165
parity 168
RAID 0 164
RAID 1 165
RAID 10 167
RAID 1E 166
RAID 5 168
RAID 50 170
RAID 5EE 169
RAID 6 171
stripe size 79
RAID 60 172
S
scheduling tasks
rescheduling 130
verifying 83
stripe size 79
striping data 164
RAID controller support 59
RAID levels
changing 87
express configuration 48
selecting 52
Snapshot
RAID segments 164
RAID Volumes 56
RaidCfg.log file 142
raidnot.log file 110
raidnot.old file 110
raidsmtp.log file 117
raidsmtp.old file 117
read cache 80
creating with backup 97
creating without backup 97
deleting 97
limitations 96
Snapshot backup 96
Snapshot nobackup 96
SNMP 25
REBOOT 26
Download from Www.Somanuals.com. All Manuals Search And Download.
●
188
SNMP support
Linux 155
Task Manager
NetWare 155
Windows 154
spares. See hot spares
stand-alone application 31
standard unit of measure 66
starting Adaptec Storage Manager
Linux 32
opening 126
NetWare 32
Windows 31
startup port number 62
status
controller properties 141
disk drives 42
tasks
display group systems 136
Event Viewer 45
Event Viewer icons 102
Notification Log icons 109
status bar 45
task events 127
tasks 127
View buttons 43
status bar 40, 45
status icons
Event Viewer 102
Notification Log 109
Task Manager 127
storage space 15
examples 19
stripe size 79
striping 164
technical support
3
Technical Support Identification
support, customer
3
(TSID) number
terminology 15
test events
3
system groups. See display groups
system requirements 18
systems 61
email notifications 114
event notifications 106
failed email messages 115
failed event notifications 107
logged notifications 106
local systems 61
remote systems 61
sorting in Enterprise View 65
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
●
189
Text Description View 43
tool bar buttons 162
TSID Number
View buttons 43
Views
See Technical Support
Identification Number
Text Description 43
U
W
upgrade features 21
unlocking 22
user permissions
Administrator level 35
Guest level 36
installation 25
starting Adaptec Storage
Manager 31
User level 36
V
starting agent 33
write cache
battery-backup cache 79
setting 79
write-back 79
verifying and fixing logical
drives 82
verifying logical drives 81, 83
automatic verification 81
background verification 81
icon 84
write-through 79
Download from Www.Somanuals.com. All Manuals Search And Download.
Adaptec, Inc.
691 South Milpitas Boulevard
Milpitas, CA 95035 USA
©2005 Adaptec, Inc.
All rights reserved. Adaptec and the Adaptec logo
are trademarks of Adaptec, Inc. which may be
registered in some jurisdictions.
Part Number: CDP-00030-01-A, Rev. A
LB 09/05
Download from Www.Somanuals.com. All Manuals Search And Download.
|