Serial Attached SCSI RAID Controllers
Installation and User’s Guide
PMC-Sierra Confidential — Preliminary Draft 10/21/11
PMC-Sierra Confidential — Preliminary Draft 10/21/11
Download from Www.Somanuals.com. All Manuals Search And Download.
●
3
Adaptec by PMC Product Support
If you have questions about installing or using your Adaptec by PMC product, check this document first—you will find answers to
most of your questions. If you need further assistance, use the support options listed below. To expedite your service, have your
computer in front of you.
Technical Support Identification (TSID) Number
●
Before contacting Technical Support, you need your product unique TSID number. The TSID number identifies your product
and support status.
●
The TSID number is included on a white, bar-coded label, like this example:
●
It’s recommended that you register your product so that you have easy access to your TSID when contacting product support.
Note: The phone numbers below are subject to change. Please visit the Support section of www.adaptec.com for the
most up to date contact information.
North America
●
●
Search the Adaptec Support Knowledgebase (ASK) at ask.adaptec.com for articles, troubleshooting tips, and frequently asked
questions for your product.
●
For information about Adaptec by PMC support options, call +1 408-957-2550, 24 hours per day, 7 days per week.
To speak with a Technical Support Specialist, call +1 408-934-7274.
●
●
You can order Adaptec by PMC products, including accessories and cables, by calling +1 408-957-7274. Or, you can order cables
Europe
●
●
●
●
●
German: Call +49 89 43 66 55 22. For support via e-mail, submit your question at ask-de.adaptec.com.
French: Call +49 89 43 66 55 33. For support via e-mail, submit your question at ask-fr.adaptec.com.
Japan
●
Call 03-3367-3970 (fax).
●
Australia
Call +61-2-9503-1555.
●
Download from Www.Somanuals.com. All Manuals Search And Download.
●
4
Limited 3-Year Hardware Warranty
1. PMC-Sierra, Inc. (“PMC-Sierra”) warrants to the purchaser of this product that it will be free from defects in material and
workmanship for a period of three (3) years from the date of purchase. If the product should become defective within the
warranty period, PMC-Sierra, at its option, will repair or replace the product, or refund the purchaser’s purchase price for the
product, provided it is delivered at the purchaser’s expense to an authorized PMC-Sierra service facility or to PMC-Sierra.
2. Repair or replacement parts or products will be furnished on an exchange basis and will either be new or reconditioned and will
be subject to original warranty term. All replaced parts or products shall become the property of PMC-Sierra. This warranty
shall not apply if the product has been damaged by accident, misuse, abuse or as a result of unauthorized service or parts.
3. Warranty service is available to the purchaser by delivering the product during the warranty period to an authorized
PMC-Sierra service facility or to PMC-Sierra and providing proof of purchase price and date. The purchaser shall bear all
shipping, packing, and insurance costs and all other costs, excluding labor and parts, necessary to effectuate repair, replacement
or refund under this warranty.
4. For more information on how to obtain warranty service, write or telephone:
●
●
●
●
Americas PMC-Sierra, Inc. at 1380 Bordeaux Drive Sunnyvale, CA 94089 USA, +1 408 934-7274
EMEA PMC-Sierra, at Lise-Meitner-Strasse 7, 85737 Ismaning, Germany, +49 89 43665544
Asia Pacific PMC-Sierra, at PO Box 110, Peakhurst NSW 2210, Australia, +61 2 8212-5531
Japan PMC-Sierra, at Tokumasu-Building 4F, 5-5-5, Higashinakano, Nakano-ku, Tokyo 164-0003, Japan, 03-3367-3970
(fax).
5. THIS LIMITED WARRANTY DOES NOT EXTEND TO ANY PRODUCT WHICH HAS BEEN DAMAGED AS A RESULT OF
ACCIDENT, MISUSE, ABUSE, OR AS A RESULT OF UNAUTHORIZED SERVICE OR PARTS.
6. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES WHICH NOW OR HEREAFTER MIGHT
OTHERWISE ARISE RESPECT TO THIS PRODUCT. IMPLIED WARRANTIES, INCLUDING THOSE OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT SHALL (A) HAVE NO
GREATER DURATION THAN 3 YEARS FROM THE DATE OF PURCHASE, (B) TERMINATE AUTOMATICALLY AT THE
EXPIRATION OF SUCH PERIOD AND (C) TO THE EXTENT PERMITTED BY LAW BE EXCLUDED. IN THE EVENT THIS
PRODUCT BECOMES DEFECTIVE DURING THE WARRANTY PERIOD, THE PURCHASER'S EXCLUSIVE REMEDY
SHALL BE REPAIR, REPLACEMENT OR REFUND AS PROVIDED ABOVE. INCIDENTAL OR CONSEQUENTIAL
DAMAGES, INCLUDING WITHOUT LIMITATION LOSS OF DATA, ARISING FROM BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ARE NOT THE RESPONSIBILITY OF PMC-SIERRA AND, TO THE EXTENT PERMITTED BY LAW,
ARE HEREBY EXCLUDED BOTH FOR PROPERTY DAMAGE, AND TO THE EXTENT NOT UNCONSCIONABLE, FOR
PERSONAL INJURY DAMAGE.
7. WITHIN THE US, SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, AND SOME STATES DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY TO
YOU.
8. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
DEPENDING ON WHERE YOU RESIDE.
9. FOR AUSTRALIA RESIDENTS, IF THE PRODUCT SHOULD BECOME DEFECTIVE WITHIN THE WARRANTY PERIOD,
PMC-SIERRA, AT ITS OPTION, WILL REPAIR OR REPLACE THE PRODUCT, OR REFUND THE PURCHASER’S
PURCHASE FOR THE PRODUCT, PROVIDED IT IS DELIVERED AT THE PURCHASER’S EXPENSE BACK TO THE
PLACE OF PURCHASE AFTER PMC-SIERRA TECHNICAL SUPPORT HAS ISSUED AN INCIDENT NUMBER. IN
ADDITION TO THE WARRANTIES SET FORTH HEREIN, OUR GOODS COME WITH GUARANTEES THAT CANNOT
BE EXCLUDED UNDER THE AUSTRALIAN CONSUMER LAW. YOU ARE ENTITLED TO A REPLACEMENT OR REFUND
FOR A MAJOR FAILURE AND FOR COMPENSATION FOR ANY OTHER REASONABLY FORESEEABLE LOSS OR
DAMAGE. YOU ARE ALSO ENTITLED TO HAVE THE GOODS REPAIRED OR REPLACED IF THE GOODS FAIL TO BE
OF ACCEPTABLE QUALITY AND THE FAILURE DOES NOT AMOUNT TO A MAJOR FAILURE.
Download from Www.Somanuals.com. All Manuals Search And Download.
●
5
Regulatory Compliance Statements
Federal Communications Commission Radio Frequency Interference Statement
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. However, if this equipment does cause
interference to radio or television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
■
■
■
■
■
Reorient or relocate the receiving antenna.
Increase the separation between equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
Use a shielded and properly grounded I/O cable and power cable to ensure compliance of this unit to the specified limits of the rules.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference and (2) this device must accept any interference received, including interference that may cause
undesired operation.
UL Compliance Statement
Adaptec by PMC products are tested and listed by Underwriters Laboratories, Inc. to UL 60950-1 Second Edition and
IEC-60950-1 Second Edition standards, file numbers E175975. Adaptec by PMC products are for use only with UL listed
ITE.
PMC-Sierra, Inc.
Use only with the listed ITE:
Adaptec RAID 5085/Adaptec RAID 5405/Adaptec RAID 5445/
Adaptec RAID 5805/
Adaptec RAID 5405Z/Adaptec RAID 5805Z/Adaptec RAID 5445Z/
Adaptec RAID 5805Q/Adaptec RAID 5805ZQ/
Adaptec RAID 51245/Adaptec RAID 51645/Adaptec RAID 52445/
Adaptec RAID 2045/Adaptec RAID 2405/Adaptec RAID 2405Q/
Adaptec RAID 2805/
Adaptec RAID 6405/Adaptec RAID 6445/Adaptec RAID 6805/
Adaptec RAID 6405E/Adaptec RAID 6805E/Adaptec RAID 6805Q/
Adaptec RAID 6405T/Adaptec RAID 6805T/Adaptec RAID 6805TQ
Tested to Comply
With FCC Standards
FOR HOME OR OFFICE USE
European Union Compliance Statement
This Information Technology Equipment has been tested and found to comply with EMC Directive 89/336/EEC, as amended by 92/31/EEC
and 93/68/EEC, in accordance with:
● EN55022 (1998+A1:2000+A2:2003) Emissions
● EN55024 (1998+A1:2001+A2:2003) Immunity:
– EN61000-4-2 (1995) Electrostatic discharge: 4 kV contact, 8 kV air
– EN61000-4-3 (1996) Radiated immunity
– EN61000-4-4 (1995) Electrical fast transients/burst: 1 kV AC, 0.5 kV I/O
– EN61000-4-5 (1995) Surges 1 kV differential mode, 2 kV common mode
– EN61000-4-6 (1996) Conducted immunity: 3 V
– EN61000-4-11 (1994) Supply dips and variation: 30% and 100%
In addition, all equipment requiring U.L. listing has been found to comply with EMC Directive 73/23/EEC as amended by 93/68/EEC in
accordance with EN60950 with amendments A1, A2, A3, A4, A11.
Australian/New Zealand Compliance Statement
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to the Australian/New Zealand
standard AS/NZS 3548 set out by the Spectrum Management Agency.
Canadian Compliance Statement
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Japanese Compliance (Voluntary Control Council Initiative)
This equipment complies to class B Information Technology equipment based on VCCI (Voluntary Control Council for Interface). This
equipment is designed for home use but it may causes radio frequency interference problem if used too near to a television or radio. Please
handle it correctly per this documentation.
Download from Www.Somanuals.com. All Manuals Search And Download.
●
6
Korean Compliance (KCC) Statement
Adaptec by PMC products are tested and certified by KCC:
KCC-REM-KHK-ASR-6xx5
The above certification covers the following series:
ASR-6805, ASR-6445, ASR-6405
ASR-6805E, ASR-6405E, ASR-6805Q
ASR-6805T, ASR-6405T, ASR-6805TQ
This equipment is home use (Class B) electromagnetic wave suitability equipment and to be used mainly at home and it can be used in all areas.
Caution: Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the
instructions.
!
Download from Www.Somanuals.com. All Manuals Search And Download.
Terminology Used in this Guide...................................................................... 13
Array-level Features.................................................................................... 18
Upgrading the Controller Firmware................................................................ 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
●
8
Disk Drives.................................................................................................. 42
Installing a RAID Controller...................................................................... 47
Next Steps.......................................................................................................... 53
Creating an Array.............................................................................................. 55
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
●
9
Installing with FreeBSD.................................................................................... 71
About the Adaptec Flash Utility....................................................................... 81
Which Utility Should I Use?............................................................................. 81
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
●
10
What is SAS?...................................................................................................... 89
What’s a SAS Port?............................................................................................ 91
How are Disk Drives Identified in SAS? .......................................................... 92
Initializing Disk Drives............................................................................. 108
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
●
11
Opening SerialSelect.................................................................................. 110
Identifying Disk Drives................................................................................... 114
Viewing the Event Log.................................................................................... 114
AFU Commands ....................................................................................... 118
Adaptec RAID 5805/5805Q/5805Z/5805ZQ LED and I2C Connector
Specification .................................................................................................... 128
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
●
12
Current Requirements .................................................................................. 149
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Guide
1
In this chapter...
What You Need to Know Before You Begin.......................................................................... 13
Terminology Used in this Guide............................................................................................ 13
This Installation and User’s Guide explains how to install your Adaptec® by PMC™ RAID
controller. It also describes the utilities included in your controller kit, and provides a basic
overview of Serial Attached SCSI (SAS) and Redundant Array of Independent Disk (RAID)
technology.
These RAID controller models are described in this guide:
●
●
●
●
●
●
●
●
●
●
●
●
●
Adaptec RAID 5085
Adaptec RAID 5405/5405Z
Adaptec RAID 5445/5445Z
Adaptec RAID 5805/5805Q/5805Z/5805ZQ
Adaptec RAID 51245
Adaptec RAID 51645
Adaptec RAID 52445
Adaptec RAID 2045
Adaptec RAID 2405/2405Q
Adaptec RAID 2805
Adaptec RAID 6405/6405E/6405T
Adaptec RAID 6445
Adaptec RAID 6805/6805Q/6805E/6805T/6805TQ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1: About This Guide
●
13
What You Need to Know Before You Begin
You should be familiar with computer hardware, data storage, RAID technology, and SAS and
You should also be familiar with Direct-Attached Storage (DAS) concepts and technology.
Note: Because this guide covers multiple Adaptec RAID products, some of the features and
Terminology Used in this Guide
Because you can use your Adaptec RAID controller to manage data storage in a variety of
configurations, the generic term “storage space” is used to refer to controller(s) and disk drives
being managed with Adaptec Storage ManagerTM or the other utilities described in this guide.
Many of the terms and concepts referred to in this guide are known to computer users by
multiple names. This guide uses these terms:
●
●
●
●
●
Controller (also known as adapter, board, or card)
Disk drive (also known as hard disk, hard drive, or hard disk drive)
Solid State Drive (also known as SSD or non-rotating storage media)
Enclosure (also known as a RAID enclosure, storage enclosure, or JBOD enclosure)
Array (also known as a container, logical device, or logical drive)
Note: Adaptec Storage Manager refers to arrays as logical drives. Your RAID controller
creates arrays, which your operating system (and Adaptec Storage Manager) recognizes as
logical drives. For more information, refer to the Adaptec Storage Manager User’s Guide on
the Adaptec Installation DVD.
How to Find More Information
You can find more information about your Adaptec RAID controller and the software and
utilities included with it by referring to these documents:
●
●
Readme.txt—Includes updated product information and known issues; located on the
Adaptec Installation DVD.
Adaptec Storage Manager User’s Guide—Describes how to install and use the Adaptec
the Adaptec Installation DVD.
●
●
Adaptec Storage Manager Online Help—Describes how to use the Adaptec Storage
Manager software; accessible from the main window of Adaptec Storage Manager.
Adaptec RAID Controller Command Line Utility User’s Guide—Describes how to use the
included Adaptec RAID Controller Configuration (ARCCONF) command line utility (see
page 80) to perform basic array and configuration management functions; located on the
Adaptec Installation DVD.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2: Kit Contents and System Requirements
●
15
Kit Contents
●
Adaptec by PMC RAID controller
●
Adaptec Installation DVD (bootable), including controller drivers, Adaptec Storage
Manager, ARCCONF command line utility, and documentation
●
Cables (Not all kits contain cables. If your kit does, the type and quantity vary—for cable
●
●
(Selected models only) Low-profile bracket
Adaptec Serial Attached SCSI RAID Controllers Quick Start Guide
System Requirements
●
PC-compatible computer with Intel Pentium, or equivalent, processor
●
Motherboard with these features:
●
●
Support for multifunction devices where one of the devices is a PCI bridge
Large memory-mapped address ranges
Refer to the Readme file on the Adaptec Installation DVD for additional motherboard
compatibility information.
●
One of these operating systems:
Note: For up-to-date operating system version support check the readme on the
Adaptec Installation DVD or visit the Adaptec Web Site at www.adaptec.com
.
●
Microsoft® Windows® Server 2008 (32-bit and 64-bit), Windows Server 2008 R2 (64-
bit), Windows Server 2003 (32-bit and 64-bit), Windows Server 2003 R2 (32-bit and
64-bit), Windows Vista, Windows 7
●
●
●
Red Hat® Enterprise Linux 6.0, 5.5 (32-bit and 64-bit)
SuSE Linux Enterprise Server 11, SuSE Linux Enterprise Server 10 (32-bit and 64-bit)
FreeBSD 8.x, 7.x,
●
●
●
Debian Linux 5, 6 (32-bit and 64-bit)
Ubuntu Linux 10, 11 (32-bit and 64-bit)
Fedora Linux 12, 13, 14 (32-bit and 64-bit)
Note: For the latest on Linux support or to download driver sources, visit the Support
area of the Adaptec Web site at www.adaptec.com
.
●
●
Solaris 10, Solaris 11 Express
VMware ESXi 5.0, VMware ESX 4.1 Classic
Note: VMware storage management options vary, depending on which version of the
●
●
128 MB (or more) of RAM
Available compatible PCIe slot (depending on your controller model—see the descriptions
●
●
20 MB of free disk drive space
16-bit SVGA color monitor with a resolution of at least 800 x 600
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2: Kit Contents and System Requirements
●
16
●
●
DVD-ROM drive
Floppy disk drive, USB flash drive, or CD burner, for creating driver disks and bootable
media
Download from Www.Somanuals.com. All Manuals Search And Download.
About Your RAID Controller
3
In this chapter...
Standard RAID Controller Features...................................................................................... 18
This chapter provides an overview of the features of your Adaptec RAID controller.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
18
Standard RAID Controller Features
●
Support for SAS disk drives, SATA/SATA II disk drives, and SATA and SAS Solid State
Drives (SSDs)
●
Flash ROM for updates to controller firmware, BIOS, and the Adaptec RAID
Configuration utility
●
●
●
Disk drive hot-swapping
Event logging and broadcasting including email and SNMP messages
Multiple options for creating and managing RAID arrays—A full software application
(Adaptec Storage Manager), a BIOS-based utility (ACU), a command line utility
●
Native command queuing (NCQ), which lets disk drives arrange commands into the most
efficient order for optimum performance
●
●
●
Support for disk drive enclosures with SES2 enclosure management hardware
●
Note: Adaptec maxCache is supported on Adaptec Series Q controllers only.
●
Power-management of disk drives in your storage space to reduce cooling and electricity
●
●
Audible alarm
I/O statistics logging
Array-level Features
Note: Not all features are supported by all controllers. For more information, refer to the Adaptec
Storage Manager User’s Guide or online Help.
●
●
●
Support for RAID 0, RAID 1, RAID 5, RAID 10, RAID 50, simple volumes, and spanned
volumes
Support for hybrid RAID 1 and RAID 10 arrays comprised of hard drives and Solid State
Drives (SSDs)
Support for JBOD disks (appear as a physical disk drives to the operating system; not
redundant)
●
●
Support for hot spares (global and dedicated)
Support for automatic failover, so arrays are automatically rebuilt when a failed drive is
replaced (applies to redundant arrays in SES2- or SAF-TE-enabled disk drive enclosures only
)
●
Optimized disk utilization, which ensures that the full capacity of all disk drives can be
used, even if the disk drives vary in size
●
●
Online capacity expansion, so you can increase the capacity of an array without recreating it
Support for array migration from one RAID level to another
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
19
Advanced Data Protection Suite
Note: The following features are supported on Adaptec Series 5 and Series 6 controllers. Striped
Mirrors are also supported on Series 2 and Series 6E controllers.
●
●
●
●
●
Copyback Hot Spare—You can use this feature to move data from a hot spare back to its
original location after a failed disk drive is replaced.
Striped Mirror (RAID 1E)—A RAID 1 Enhanced array is similar to a RAID 1 array except
that data is both mirrored and striped, and more disk drives can be included.
Hot Space (RAID 5EE)—A RAID 5EE array is similar to a RAID 5 array except that it
includes a distributed spare and must be built from a minimum of four disk drives.
Dual Drive Failure Protection (RAID 6)—A RAID 6 array is similar to a RAID 5 array
except that it includes two independent sets of parity data instead of one.
Dual Drive Failure Protection (RAID 60)—A RAID 60 array is similar to a RAID 50 array
except that it includes four independent sets of parity data instead of two.
Adding a Battery Backup Module
This table shows the battery model supported by your Adaptec RAID controller.To purchase a
RAID Controller
Battery Model
Adaptec RAID 5085/Adaptec RAID 5405/Adaptec RAID
5445/Adaptec RAID 5805/5805Q/
Adaptec Battery Module 800
Adaptec Battery Module 800T
Adaptec 51245/Adaptec 51645/Adaptec 52445
Adding a Flash Backup Module
This table shows the flash backup module (“zero maintenance cache protection”) supported
by your Adaptec RAID controller. To purchase a flash backup module, refer to the Adaptec Web
RAID Controller
Flash Module
Adaptec RAID 5805Z/Adaptec RAID 5805ZQ/Adaptec RAID
5445Z/Adaptec RAID 5405Z
Adaptec Flash Backup Module
ZMM-100DB (pre-installed) with
ZMM-100CC Supercapacitor Card
Adaptec RAID 6805/Adaptec RAID 6445/Adaptec RAID
6405/Adaptec RAID 6805T/Adaptec RAID 6405T
Adaptec Flash Backup Module
AFM-600 (optional) with
Supercapacitor Card
Adaptec RAID 6805Q/Adaptec RAID 6805TQ
Adaptec Flash Backup Module
AFM-600 (pre-installed) with
Supercapacitor Card
Upgrading the Controller Firmware
command-line utility to upgrade your controller firmware. Refer to the Adaptec Storage
Manager User’s Guide and the Adaptec Command Line Interface User’s Guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
20
About the Adaptec RAID 5085
The Adaptec RAID 5085 is a SAS RAID controller with these features:
Ext. Alarm
Diagnostic
Aggregate Activity
Mode 0 Flash
connector
LEDs
Drive Activity
LEDs
Audible Alarm
Drive Activity LED
connectors for CN1/CN0
CN0
CN1
Battery connector
2 external SAS
connectors
PCIe x8 connector
Mounting bracket
Form Factor
Low-profile MD2
Bus compatibility
PCIe 1.1
PCIe bus width
x8
Data transfer rate
Phys (Unified Serial Ports)
Standard cache
3 Gb/s per port
8
512 MB DDR2
2 mini-SAS x4 (SFF-8088)
Connectors, external
Maximum number of disk drives
Enclosure Support
Onboard speaker
8 direct-attached (or up to 256 with expanders)
I2C and SGPIO (Serial General Purpose Input/Output)
Yes
Battery Backup Module
Adaptec Battery Module 800/800T (sold separately—see
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
21
About the Adaptec RAID 5405
The Adaptec RAID 5405 is a SAS RAID controller with these features:
Drive Activity LED connectors for CN0
Drive Activity LEDs for CN0
Mode 0 Flash
Diagnostic LEDs
connector
Aggregate
Activity
Internal mini-SAS
connector CN0
Status CN0
I2C connector for CN0
Battery connector
PCIe x8 connector
Mounting bracket
Ext. Alarm connector
Form Factor
Low-profile MD2
Bus compatibility
PCIe 1.1
PCIe bus width
x8
Data transfer rate
3 Gb/s per port
4
Phys (Unified Serial Ports)
Standard cache
256 MB DDR2
1 mini-SAS x4 (SFF-8087)
Connectors, internal
Maximum number of disk drives
Enclosure Support
Onboard speaker
4 direct-attached (or up to 256 with expanders)
I2C and SGPIO (Serial General Purpose Input/Output)
Yes
Battery Backup Module
Adaptec Battery Module 800/800T (sold separately—see
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
22
About the Adaptec RAID 5445
The Adaptec RAID 5445 is a SAS RAID controller with these features:
Diagnostic LEDs
(back of card)
Drive Activity CN1/CN0
Status CN1/CN0
Mode 0 Flash connector
Ext. Alarm
Internal mini-SAS
connector CN0
Battery
connector
External mini-
SAS connector
CN1
Audible Alarm
Aggregate
Activity
I2C connector for CN0
PCIe x8 connector
Mounting bracket
Form Factor
Low-profile MD2
Bus compatibility
PCIe bus width
PCIe 1.1
x8
Data transfer rate
3 Gb/s per port
8
Phys (Unified Serial Ports)
Standard cache
512 MB DDR2
Connectors
1 mini-SAS x4 (SFF-8087) internal
1 mini-SAS x4 (SFF-8088) external
Maximum number of disk drives
Enclosure Support
8 direct-attached (or up to 256 with expanders)
I2C and SGPIO (Serial General Purpose Input/Output)
Yes
Onboard speaker
Battery Backup Module
Adaptec Battery Module 800/800T (sold separately—see
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
23
About the Adaptec RAID 5805/5805Q
The Adaptec RAID 5805/5805Q is a SAS RAID controller with these features:
Drive Activity LED connectors for CN0/CN1
Drive Activity LEDs for CN0/CN1
Mode 0 Flash
connector
Diagnostic LEDs
CN1
Aggregate
Activity
2 internal mini-SAS
connectors
CN0
Status CN1, CN0
I2C connector for CN1
I2C connector for CN0
Battery connector
PCIe x8 connector
Mounting bracket
Ext. Alarm connector
Form Factor
Low-profile MD2
Bus compatibility
PCIe bus width
PCIe 1.1
x8
Data transfer rate
3 Gb/s per port
8
Phys (Unified Serial Ports)
Standard cache
512 MB DDR2
2 mini-SAS x4 (SFF-8087)
Connectors, internal
Maximum number of disk drives
maxCache SSD support
8 direct-attached (or up to 256 with expanders)
5805Q: 8 maxCache-compatible SSDs using any Solid State
Drive on compatibility list (2TB max); see www.adaptec.com/
compatibility
Enclosure Support
Onboard speaker
I2C and SGPIO (Serial General Purpose Input/Output)
Yes
Battery Backup Module
Adaptec Battery Module 800/800T (sold separately—see
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
24
About the Adaptec RAID 51245
The Adaptec RAID 51245 is a SAS RAID controller with these features:
I2C, CN1
I2C, CN0
Mode 0 Flash
I2C, CN2
Activity CN2
CN0
3 internal
mini-SAS
connectors
Activity
CN0, CN1
CN1
CN2
CN6
1 external
mini-SAS
connector
Reserved
Ext. Alarm
Aggregate Activity
Battery connector
Form Factor
Full Height, Half Length
Bus compatibility
PCIe 1.1
PCIe bus width
x8
Data transfer rate
3 Gb/s per port
16
Phys (Unified Serial Ports)
Standard cache
512 MB DDR2
Connectors, Internal
Connectors, External
Maximum number of disk drives
Enclosure Support
3 mini-SAS x4 (SFF-8087)
1 mini-SAS x4 (SFF-8088)
16 direct-attached (or up to 256 with expanders)
I2C and SGPIO (Serial General Purpose Input/Output)
Yes
Onboard speaker
Battery Backup Module
Adaptec Battery Module 800/800T (sold separately—see
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
25
About the Adaptec RAID 51645
The Adaptec RAID 51645 is a SAS RAID controller with these features:
I2C, CN1
I2C, CN0
Mode 0 Flash
Activity CN2, CN3
I2C, CN2
I2C, CN3
CN0
4 internal
mini-SAS
connectors
Activity
CN0, CN1
CN1
CN2
CN3
CN6
1 external
mini-SAS
connector
Reserved
Ext. Alarm
Battery connector
Aggregate Activity
Form Factor
Full Height, Half Length
PCIe 1.1
Bus compatibility
PCIe bus width
x8
Data transfer rate
Phys (Unified Serial Ports)
Standard cache
3 Gb/s per port
20
512 MB DDR2
4 mini-SAS x4 (SFF-8087)
1 mini-SAS x4 (SFF-8088)
Connectors, Internal
Connectors, External
Maximum number of disk drives
Enclosure Support
Onboard speaker
20 direct-attached (or up to 256 with expanders)
I2C and SGPIO (Serial General Purpose Input/Output)
Yes
Battery Backup Module
Adaptec Battery Module 800/800T (sold separately—see
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
26
About the Adaptec RAID 52445
The Adaptec RAID 52445 is a SAS RAID controller with these features:
Mode 0 Flash connector
I2C, CN2
Activity CN2, CN3
I2C, CN1
I2C, CN0
I2C, CN3
I2C, CN4
I2C, CN5
CN4 CN5
CN0
CN1
CN2
Activity
CN0, CN1
CN6
1 external
mini-SAS
connector
CN3
6 internal
mini-SAS
connectors
Reserved
Ext. Alarm
Aggregate Activity
Activity CN4, CN5
Battery connector
Form Factor
Full Height, Half Length
PCIe 1.1
Bus compatibility
PCIe bus width
x8
Data transfer rate
Phys (Unified Serial Ports)
Standard cache
3 Gb/s per port
28
512 MB DDR2
6 mini-SAS x4 (SFF-8087)
1 mini-SAS x4 (SFF-8088)
Connectors, Internal
Connectors, External
Maximum number of disk drives
Enclosure Support
Onboard speaker
28 direct-attached (or up to 256 with expanders)
I2C and SGPIO (Serial General Purpose Input/Output)
Yes
Battery Backup Module
Adaptec Battery Module 800/800T (sold separately—see
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
27
About the Adaptec RAID 5405Z
The Adaptec RAID 5405Z is a SAS RAID controller with these features:
Drive Activity LED connectors for CN0
Drive Activity LEDs for CN0
I2C connector for CN0
Ext. Alarm connector
Aggregate Activity
Mode 0 Flash connector
Diagnostic LEDs
Internal mini-SAS
connector CN0
ZMM-100CC Supercapacitor
connector
PCIe x8 connector
ZMM-100DB
Mounting bracket
Daughterboard
Form Factor
Low-profile MD2
PCIe 1.1
Bus compatibility
PCIe bus width
x8
Data transfer rate
3 Gb/s per port
4
Phys (Unified Serial Ports)
Standard cache
512 MB DDR2
Connectors, internal
Maximum number of disk drives
Enclosure Support
Onboard speaker
1 mini-SAS x4 (SFF-8087)
4 direct-attached (or up to 256 with expanders)
I2C and SGPIO (Serial General Purpose Input/Output)
Yes
Zero Maintenance Cache
Protection Module
Adaptec ZMM-100DB daughterboard (pre-installed),
Adaptec ZMM-100CC supercapacitor module (user
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
28
About the Adaptec RAID 5445Z
The Adaptec RAID 5445Z is a SAS RAID controller with these features:
Drive Activity LED connectors for CN0/CN1
Drive Activity LEDs for CN0/CN1
I2C connectors for CN0/CN1
Ext. Alarm connector
Aggregate Activity
Mode 0 Flash connector
Diagnostic LEDs
Internal mini-SAS
connector CN0
CN1
1 external
mini-SAS
connector
ZMM-100CC Supercapacitor
connector
PCIe x8 connector
ZMM-100DB
Daughterboard
Mounting bracket
Form Factor
Low-profile MD2
Bus compatibility
PCIe bus width
PCIe 1.1
x8
Data transfer rate
Phys (Unified Serial Ports)
Standard cache
Connectors
3 Gb/s per port
8
512 MB DDR2
1 mini-SAS x4 (SFF-8087) internal
1 mini-SAS x4 (SFF-8088) external
Maximum number of disk drives
Enclosure Support
8 direct-attached (or up to 256 with expanders)
I2C and SGPIO (Serial General Purpose Input/Output)
Yes
Onboard speaker
Zero Maintenance Cache
Protection Module
Adaptec ZMM-100DB daughterboard (pre-installed),
Adaptec ZMM-100CC supercapacitor module (user
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
29
About the Adaptec RAID 5805Z/5805ZQ
The Adaptec RAID 5805Z/5805ZQ is a SAS RAID controller with these features:
Drive Activity LED connectors for CN0/CN1
Drive Activity LEDs for CN0/CN1
I2C connectors for CN0/CN1
Ext. Alarm connector
Aggregate Activity
Mode 0 Flash connector
Diagnostic LEDs
CN1
2 internal mini-SAS
connectors
CN0
ZMM-100CC Supercapacitor
connector
PCIe x8 connector
ZMM-100DB
Mounting bracket
Daughterboard
Form Factor
Low-profile MD2
Bus compatibility
PCIe bus width
PCIe 1.1
x8
Data transfer rate
3 Gb/s per port
8
Phys (Unified Serial Ports)
Standard cache
512 MB DDR2
2 mini-SAS x4 (SFF-8087)
Connectors, internal
Maximum number of disk drives 8 direct-attached (or up to 256 with expanders)
maxCache SSD support
5805ZQ: 8 maxCache-compatible SSDs using any Solid State
Drive on compatibility list (2TB max); see www.adaptec.com/
compatibility
Enclosure Support
Onboard speaker
I2C and SGPIO (Serial General Purpose Input/Output)
Yes
Zero Maintenance Cache
Protection Module
Adaptec ZMM-100DB daughterboard (pre-installed),
Adaptec ZMM-100CC supercapacitor module (user installed—
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
30
About the Adaptec RAID 2045
The Adaptec RAID 2045 is a SAS RAID controller with these features:
Aggregate Activity
Mode 0 Flash connector
CN1
1 external mini-
PCIe x8 connector
SAS connector
Mounting bracket
Form Factor
Low-profile MD2
Bus compatibility
PCIe 1.1
PCIe bus width
x8
Data transfer rate
Phys (Unified Serial Ports)
Standard cache
3 Gb/s per port
4
128 MB DDR2
Connectors, external
Maximum number of disk drives
Enclosure Support
Onboard speaker
1 mini-SAS x4 (SFF-8088)
4 direct-attached (or up to 128 with expanders)
I2C and SGPIO (Serial General Purpose Input/Output)
No
No
Battery Backup Module
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
31
About the Adaptec RAID 2405/2405Q
The Adaptec RAID 2405/2405Q is a SAS RAID controller with these features:
Drive Activity LED connector for CN0
Aggregate Activity
Mode 0 Flash connector
Internal mini-SAS
connector CN0
I2C, CN0
PCIe x8 connector
Mounting bracket
Form Factor
Low-profile MD2
Bus compatibility
PCIe 1.1
PCIe bus width
x8
Data transfer rate
3 Gb/s per port
4
Phys (Unified Serial Ports)
Standard cache
128 MB DDR2
1 mini-SAS x4 (SFF-8087)
Connectors, internal
Maximum number of disk drives
maxCache SSD support
4 direct-attached (or up to 128 with expanders)
2405Q: 8 maxCache-compatible SSD using any Solid State
Drive on compatibility list (80GB max); see
www.adaptec.com/compatibility
Enclosure Support
Onboard speaker
I2C and SGPIO (Serial General Purpose Input/Output)
No
No
Battery Backup Module
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
32
About the Adaptec RAID 2805
The Adaptec RAID 2805 is a SAS RAID controller with these features:
Drive Activity LED connector for CN0/CN1
Aggregate Activity
Mode 0 Flash connector
Internal mini-SAS
connector CN1
Internal mini-SAS
connector CN0
I2C, CN0
I2C, CN1
PCIe x8 connector
Mounting bracket
Form Factor
Low-profile MD2
Bus compatibility
PCIe 1.1
PCIe bus width
x8
Data transfer rate
Phys (Unified Serial Ports)
Standard cache
3 Gb/s per port
8
128 MB DDR2
2 mini-SAS x4 (SFF-8087)
Connectors, internal
Maximum number of disk drives
Enclosure Support
Onboard speaker
8 direct-attached (or up to 128 with expanders)
I2C and SGPIO (Serial General Purpose Input/Output)
No
No
Battery Backup Module
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
33
About the Adaptec RAID 6405
The Adaptec RAID 6405 is a SAS RAID controller with these features:
Drive Activity LED connector for CN0
I2C connector for CN0
Ext. Alarm connector
Activity LEDs
(back of card)
Aggregate Activity
HDA mode connector
Diagnostic LEDs
Daughterboard
connector
Internal mini-SAS
connector CN0
PCIe x8 connector
Mounting bracket
Form Factor
Low-profile MD2
PCIe Gen2
Bus compatibility
PCIe bus width
Data transfer rate
x8
6 Gb/s per port
4
Phys (Unified Serial Ports)
Standard cache
512 MB DDR2
1 mini-SAS x4 (SFF-8087)
Connectors, internal
Maximum number of disk drives
Enclosure Support
4 direct-attached (or up to 256 with expanders)
I2C and SGPIO (Serial General Purpose Input/Output)
Yes
Onboard speaker
Zero Maintenance Cache
Protection Module
Adaptec Flash Backup Module AFM-600 (optional; sold
separately)
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
34
About the Adaptec RAID 6445
The Adaptec RAID 6445 is a SAS RAID controller with these features:
Drive Activity LED connector for CN0
I2C connector for CN0
Ext. Alarm connector
Aggregate Activity
Drive Activity LEDs
(back of card)
HDA mode connector
Diagnostic LEDs
CN1
Daughterboard
connector
1 external
mini-SAS
Internal mini-SAS
connector CN0
connector
PCIe x8 connector
Mounting bracket
Form Factor
Low-profile MD2
Bus compatibility
PCIe bus width
PCIe Gen2
x8
Data transfer rate
Phys (Unified Serial Ports)
Standard cache
Connectors
6 Gb/s per port
8
512 MB DDR2
1 mini-SAS x4 (SFF-8087) internal
1 mini-SAS x4 (SFF-8088) external
Maximum number of disk drives 8 direct-attached (or up to 256 with expanders)
Enclosure Support
Onboard speaker
SES, I2C, and SGPIO (Serial General Purpose Input/Output)
Yes
Zero Maintenance Cache
Protection Module
Adaptec Flash Backup Module AFM-600 (optional; sold
separately)
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
35
About the Adaptec RAID 6805/6805Q
The Adaptec RAID 6805/6805Q is a SAS RAID controller with these features:
Drive Activity LED connector for CN0/CN1
I2C connector for CN1
I2C connector for CN0
Ext. Alarm connector
Aggregate Activity
Drive Activity LEDs
(back of card)
HDA mode connector
Diagnostic LEDs
CN1
CN0
Daughterboard
connector
2 internal mini-SAS
connectors
PCIe x8 connector
Mounting bracket
Form Factor
Low-profile MD2
PCIe Gen2
Bus compatibility
PCIe bus width
x8
Data transfer rate
6 Gb/s per port
8
Phys (Unified Serial Ports)
Standard cache
512 MB DDR2
2 mini-SAS x4 (SFF-8087)
Connectors, internal
Maximum number of disk drives
maxCache SSD support
8 direct-attached (or up to 256 with expanders)
6805Q: Up to eight solid state drives, 1TB capacity, max.
See the maxCache compatibility list at www.adaptec.com/
compatibility.
Enclosure Support
Onboard speaker
I2C and SGPIO (Serial General Purpose Input/Output)
Yes
Zero Maintenance Cache
Protection Module
Adaptec Flash Backup Module AFM-600 (6805: optional,
sold separately; 6805Q: standard, pre-installed)
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
36
About the Adaptec RAID 6405E
The Adaptec RAID 6405E is a SAS RAID controller with these features:
Drive Activity LED connector for CN0
HDA mode connector
Ext. Alarm connector
Aggregate Activity
PCIe x1 connector
Internal mini-SAS
connector CN0
Mounting bracket
Form Factor
Low-profile MD2 (reduced length: 5.12 inches)
Bus compatibility
PCIe bus width
Data transfer rate
PCIe Gen2
x1
6 Gb/s per port
Phys (Unified Serial Ports)
Standard cache
4
128 MB DDR2
Connectors, internal
Maximum number of disk drives
Enclosure Support
1 mini-SAS x4 (SFF-8087)
4 direct-attached
SGPIO (Serial General Purpose Input/Output)
Onboard speaker
Yes
No
Battery Backup Module
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
37
About the Adaptec RAID 6805E
The Adaptec RAID 6805E is a SAS RAID controller with these features:
Drive Activity LED connector for CN0/CN1
HDA mode connector
Ext. Alarm connector
Aggregate Activity
CN1
CN0
2 internal mini-SAS
connectors
PCIe x4 connector
Mounting bracket
Form Factor
Low-profile MD2 (reduced length: 6.1 inches)
Bus compatibility
PCIe Gen2
PCIe bus width
x4
Data transfer rate
Phys (Unified Serial Ports)
Standard cache
6 Gb/s per port
8
128 MB DDR2
Connectors, internal
Maximum number of disk drives
Enclosure Support
Onboard speaker
2 mini-SAS x4 (SFF-8087)
8 direct-attached
SGPIO (Serial General Purpose Input/Output)
Yes
No
Battery Backup Module
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
38
About the Adaptec RAID 6405T
The Adaptec RAID 6405T is a SAS RAID controller with these features:
Internal mini-SAS connector CN0
Drive Activity LED connector for CN0
Diagnostic/Activity LEDs
Ext. Alarm connector
HDA mode connector
Aggregate Activity
Daughterboard
connector
PCIe x8 connector
Mounting bracket
Form Factor
Low-profile MD2
Bus compatibility
PCIe Gen2
x8
PCIe bus width
Data transfer rate
Phys (Unified Serial Ports)
Standard cache
6 Gb/s per port
4
512 MB DDR2
1 mini-SAS x4 (SFF-8087)
Connectors, internal
Maximum number of disk drives
Enclosure Support
Onboard speaker
4 direct-attached (or up to 256 with expanders)
SGPIO (Serial General Purpose Input/Output)
Yes
Zero Maintenance Cache
Protection Module
Adaptec Flash Backup Module AFM-600 (optional; sold
separately)
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3: About Your RAID Controller
●
39
About the Adaptec RAID 6805T/6805TQ
The Adaptec RAID 6805T/6805TQ is a SAS RAID controller with these features:
2 internal mini-SAS connectors
Drive Activity LED connector for CN0/CN1
Diagnostic/Activity LEDs
Ext. Alarm connector
HDA mode connector
Aggregate Activity
CN0
CN1
Daughterboard
connector
PCIe x8 connector
Mounting bracket
Form Factor
Low-profile MD2
Bus compatibility
PCIe Gen2
PCIe bus width
x8
Data transfer rate
6 Gb/s per port
Phys (Unified Serial Ports)
Standard cache
8
512 MB DDR2
Connectors, internal
Maximum number of disk drives
maxCache SSD support
2 mini-SAS x4 (SFF-8087)
8 direct-attached (or up to 256 with expanders)
6805TQ: Up to eight solid state drives, 1TB capacity, max.
See the maxCache compatibility list at www.adaptec.com/
compatibility.
Enclosure Support
Onboard speaker
SGPIO (Serial General Purpose Input/Output)
Yes
Zero Maintenance Cache
Protection Module
Adaptec Flash Backup Module AFM-600 (6805T: optional,
sold separately; 6805TQ: standard, pre-installed)
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
4
In this chapter...
This chapter provides the basic information you need to set up your disk drives and arrays the
way you want them. It describes the options you have for installing your Adaptec RAID
controller and disk drives and creating arrays for storage. It also describes how to prepare your
controller for installation into a low-profile computer cabinet.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4: Getting Started
●
41
Choosing a RAID Level
This section provides a brief overview of the RAID levels supported by your Adaptec RAID
controller, including the minimum and maximum number of disk drives required by each.
Note: Before you begin, familiarize yourself with your controller’s physical features and the
●
●
●
●
●
●
●
●
RAID 0 (Non-redundant Array)—Stripes data across multiple disk drives. Improved
RAID 1 Array—Created from two disk drives where one disk drive is a mirror of the other
RAID 1E Array Similar to a RAID 1 array except that data is mirrored and striped, and more
—
RAID 5 Array—Stripes data for improved performance and uses parity data to provide
RAID 5EE Array—Similar to a RAID 5 array, but includes a distributed spare and must
RAID 10 Array—Built from two or more equal-sized RAID 1 arrays, stripes and mirrors
RAID 50 Array—Built from multiple disk drives configured as two or more RAID 5 arrays,
RAID 6 Array—Similar to a RAID 5 array except that it includes two independent sets of
●
RAID 60 Array—Similar to a RAID 50 array except that it includes four independent sets
controller to support the RAID level you want.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4: Getting Started
●
42
Selecting Disk Drives and Cables
Disk Drives
Your SAS controller supports SAS disk drives, SATA disk drives, and SATA and SAS Solid State
Drives (SSDs). When selecting disk drives for your RAID array, ensure that all the disk drives have
the same performance level. You can use different-sized disk drives in the array, but the array will
be limited to the capacity of the smallest and slowest disk drive. For more information about
arrays, refer to the Adaptec Storage Manager User’s Guide or online Help. For more information
about compatible disk drives, refer to the Adaptec Web site at www.adaptec.com/compatibility.
Cables
Depending on your requirements, you can use any of these cables:
External mini-SAS (SFF-8088 to SFF-8470)—
Connects to an external SAS enclosure.
Internal mini-SAS with power (SFF-8087 to SFF-8482)—Connects
to four SAS or SATA disk drives.
Internal mini-SAS to SATA fan-out (SFF-8087 to 4x SATA)—Connects
to four SATA disk drives.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4: Getting Started
●
43
External mini-SAS to mini-SAS (SFF-8088 to SFF-8088)—
Connects to a backplane or enclosure.
Internal mini-SAS to mini-SAS (SFF-8087 to SFF-8087)—
Connects to a backplane or enclosure.
Cable connectors are keyed so that you can’t insert them incorrectly.
We recommend using only Adaptec SAS cables. For more information or to purchase cables,
Replacing the Full-Height Bracket with a Low-Profile Bracket
If you are installing your Adaptec RAID controller into a low-profile computer cabinet, replace
the original full-height bracket with the low-profile bracket included in your distribution kit.
The full-height bracket is mounted on the front of the controller, the low-profile bracket is
mounted on the back of the controller, as shown in the figure below.
Full-height bracket
Low-profile bracket
Back of board
Front of board
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4: Getting Started
●
44
To replace the full-height bracket with the low-profile bracket:
Remove the full-height bracket from the controller board. The full-height bracket is
1
installed on the front side of the controller, with the mounting screws inserted from the
back of the controller, as shown in the Figure 1. Using a Phillips head screw driver, remove
Remove mounting
screws with Phillips
screw driver
Back of board
Front of board
Figure 1
Figure 2
2
Attach the low-profile bracket to the controller board. The low-profile bracket is installed
on the back side of the controller, with the mounting screws inserted from the front of the
controller, as shown the Figure 3.
Insert the screws through the holes on the front of the controller, then fasten the screws to
the bracket with a Phillips screw driver.
Caution: The mount points on the low-profile bracket have a smooth or flat side and a
raised side that looks like a spacer (see Figure 3). Be sure to install the bracket with
the flat side against the controller PCB and the raised side facing away from the PCB.
!
Flat side of bracket
Front of board
Raised side of bracket
Back of board
Figure 3
Caution: The torque on the mounting screws should be a maximum of 3.0-4.0 lbf-in to
avoid deformation. Be sure that the controller is not bent after attaching the low-profile
bracket to the controller board.
!
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4: Getting Started
●
45
Installation Options
When you install your Adaptec RAID controller, you can choose to create a bootable array and
then install your operating system and the controller driver on that array.
Alternatively, you can complete a standard installation, where the controller driver is installed
on an existing operating system.
Basic Installation Steps
This section describes the installation process. Follow the steps for the installation option
you’ve chosen.
Installing with an Operating System
1
If your controller has an external connector, you can connect external disk drives as well
(or instead).
2
3
4
5
Installing on an Existing Operating System
1
If your controller has an external connector, you can connect external disk drives as well
(or instead).
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Controller and Disk
Drives
5
In this chapter...
Before You Begin .................................................................................................................... 47
Connecting Disk Drives to Your Controllers........................................................................ 50
This chapter explains how to install your Adaptec RAID controller, and how to install and
connect internal and external disk drives.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5: Installing the Controller and Disk Drives
●
47
Before You Begin
●
●
Familiarize yourself with your RAID controller’s physical features and the RAID levels that
●
Ensure you have the right quantity of disk drives for the RAID level you want to use for
●
●
If you are installing a low-profile RAID controller into a low-profile computer cabinet,
replace the original full-height bracket with the low-profile bracket included in the kit (see
page 43).
Installing the Controller
This section describes how to install your Adaptec RAID controller into your computer cabinet.
Adaptec RAID controllers come in two basic configurations: Standard and Zero Maintenance
Cache Protection with batteryless backup (ZMCP). ZMCP uses flash memory and a
supercapacitor module to protect the cache without a battery.
Follow one of these sets of instructions:
●
●
To install a standard series Adaptec RAID controller (without Zero Maintenance Cache
Protection), see the following section.
48.
Caution: Be sure to handle the controller by its bracket or edges only.
!
Installing a RAID Controller
1
Turn off your computer and disconnect the power cord. Open
the cabinet, following the manufacturer’s instructions.
2
Select an available PCIe expansion slot that’s compatible with
your RAID controller and remove the slot cover, as shown at
right. (PCIe bus compatibility is marked to the controller figures
Caution: Touch a grounded metal object before handling
the RAID controller.
!
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5: Installing the Controller and Disk Drives
●
48
3
As shown at right, insert the RAID controller into the expansion
slot and press down gently but firmly until it clicks into place.
When installed properly, the RAID controller should appear
level with the expansion slot
.
4
5
Secure the bracket in the expansion slot, using the retention device
(for instance, a screw or lever) supplied with your computer.
Connect your computer’s disk activity LED cable to the LED
).
Ensure that the positive lead of the LED cable (usually a red
wire or a wire marked with a red stripe) is attached to pin 1.
6
7
Optional—Connect your RAID controller’s I2C connector (not available on all models) to
an I2C connector on an internal backplane or enclosure, using an I2C cable. For more
Prepare and install your internal disk drives, following the instructions in Connecting Disk
If you are not installing internal disk drives, close your computer cabinet, reattach the
Installing a RAID Controller with Zero Maintenance Cache Protection
Note: On Adaptec Series 5Z and Series 6Q controllers, the flash module daughterboard is pre-
19), the daughterboard is user installed. The supercapacitor module (used by all controllers
with Zero Maintenance Cache Protection) is never pre-installed. Refer to the flyer included in
the kit for details about installing the flash module daughterboard on the controller, as needed.
Warning: (i) Do NOT remove or insert a fully charged supercapacitor module. Always
discharge the unit first to avoid damage to the controller or flash backup module. The
factory ships with discharged units, so they are safe to install when you receive them. To
ensure that an installed unit is discharged, switch your system OFF, then wait 5 minutes.
After a dirty shutdown, wait 3 minutes after backup is complete, then remove the unit.
controller with Zero Maintenance Cache Protection. The battery can overheat and may even
explode!
1
2
Turn off your computer and disconnect the power cord. Open
the cabinet, following the manufacturer’s instructions.
Select an available PCIe expansion slot that’s compatible with
your RAID controller and remove the slot cover, as shown at
right. (PCIe bus compatibility is marked to the controller figures
Caution: Touch a grounded metal object before handling
the RAID controller.
!
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5: Installing the Controller and Disk Drives
●
49
3
4
As shown at right, insert the RAID controller into the
expansion slot and press down gently but firmly until it clicks
into place. When installed properly, the RAID controller
should appear level with the expansion slot
.
Secure the bracket in the expansion slot, using the retention
device (for instance, a screw or lever) supplied with your
computer.
5
6
Attach the supercapacitor module to the RAID
Supercapacitor
module
controller by inserting the connector into the socket on
the flash module daughterboard, as shown at right. The
connector attaches to the socket in only one direction.
Choose a location on the chassis or in the system to fix
the tethered supercapacitor module using the included
cable-ties such that (i) the cable (18.5") reaches the
mating location on the RAID controller when the
controller is installed in the expansion slot; (ii) wiring is
routed and secured so that it does not contact any
moving parts (fans, for instance); and (iii) the
Connector on daughterboard
supercapacitor module is protected from heat.
7
Thread the cable-ties through the slots on the
supercapacitor module and fix to the selected
location on the computer chassis. The cable-ties
should completely encircle the supercapacitor
module to ensure that it is held in place
securely, as shown in the figure at right. Be
careful not to restrict air-flow through your
system.
8
9
Connect your computer’s disk activity LED cable to the LED connector on the controller
(
).
Ensure that the positive lead of the LED cable (usually a red wire or a wire marked with a
red stripe) is attached to pin 1.
Connect your RAID controller’s I2C connector to an I2C connector on an internal
If you are not installing internal disk drives, close your computer cabinet, reattach the
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5: Installing the Controller and Disk Drives
●
50
Connecting Disk Drives to Your Controllers
You can connect SAS disk drives, SATA disk drives, and SATA and SAS Solid State Drives
(SSDs) to your Adaptec RAID controller. (See www.adaptec.com/compatibility for a list of
compatible drives.) There are no jumpers or switches to set before installation.
If you plan to build a bootable array, ensure you install at least the minimum number disk
Note: Although you can connect both SAS and SATA disk drives to your SAS controller, we
recommend that you not combine SAS and SATA disk drives within the same array or logical
You have two connection options:
●
To connect directly to the controller, see the following section.
●
Connecting Drives Directly to the Controller
In a direct-attach connection, SAS or SATA disk drives are connected directly to a SAS card
with SAS cables. The number of direct-attached disk drives is limited to four per internal SAS
1
Install your internal SAS or SATA disk drives, following the instructions in your system’s
documentation.
2
Use internal SAS or mini-SAS cables to attach the disk drives to the controller, as shown in
the following example.
SAS/SATA
disk drives
internal x4 mini-SAS connectors
mini-SAS to SATA fan-out cable
Single-port connector
Note: SAS fan-out cables are also available with an additional sideband (SFF-8448) cable
that caries SGPIO signals for enclosure management. This additional sideband cable is not
used with direct-attached disk drives.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5: Installing the Controller and Disk Drives
●
51
3
When all internal disk drives have been installed and attached to the controller, close your
computer cabinet, reattach the power cord, then continue with Connecting External
Connecting Drives to a System Backplane
In a backplane connection, disk drives and SAS cards are attached to and communicate with
each other through a system backplane.
The number of disk drives is limited to the number of slots available on the backplane. Some
backplanes have embedded SAS expanders and can support up to 128 end devices. (For more
1
Connect one or more internal SAS or SATA disk drives to the backplane. (Refer to your
system’s documentation for more information.)
2
Use an internal SAS cable to connect the controller to the backplane, as shown in the
Disk drives on
backplane
Controller connected to backplane
with Internal mini-SAS to mini-SAS
(SFF-8087 to SFF-8087)
Disk drives on
backplane
External SAS cable
connecting to a
drive bay
Controller connected to backplane
with multi-lane cable (SFF-8484)
3
When all internal disk drives have been installed and connected, close your computer
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5: Installing the Controller and Disk Drives
●
52
Connecting Solid State Drives (SSDs)
To connect a Solid State Drive to your controller, use a direct-attached connection or a
backplane connection. If your server does not have a standard 2.5-inch drive tray, you must use
a bracket/SLED which enables the SSD to fit properly.
Note: For Adaptec maxCache applications or hybrid RAID arrays (comprised of hard drives and
SSDs) you can use any Solid State Drive on the compatibility list. See www.adaptec.com/
compatibility for a list of compatible SSDs. Adaptec maxCache is supported on Adaptec Series
Q controllers only.
In a direct-attach connection (described in the steps below), you connect SSDs directly to the
controller with SAS cables (mini-SAS to SATA). In a backplane connection, use the appropriate
maxCache caching applications, you can connect a maximum of eight maxCache-compatible
SSDs to a controller. For RAID arrays, Adaptec controllers support a maximum of 256 drives,
1
Install your SSDs in your server. For servers with a standard 2.5-inch drive tray, install the
SSD directly into the tray. If your server does not have a standard 2.5-inch drive tray, use a
bracket or adapter which enables it to fit properly.
Use a 2.5” to 3.5” adapter to
install your SSD if server does
not have 2.5” tray.
Typical SSD installation
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5: Installing the Controller and Disk Drives
●
53
2
Use an internal mini-SAS to SATA cable to attach the SSD(s) to the controller, as shown in
the following example.
To other SSDs
Internal x4 mini-SAS connector
Single-port connector
SSD connected to controller with
internal mini-SAS to SATA Fanout cable
(SFF-8087 to 4x-SATA)
3
When all SSDs have been installed and connected, close your computer cabinet, reattach
.
Connecting External Devices
Use high-quality cables to connect your controller to your external device(s), such as disk
drives or disk drive enclosures.
We recommend using only Adaptec cables. For more information or to purchase cables, visit
Next Steps
If you are installing the controller driver and an operating system onto a bootable array,
If you are completing a standard installation onto an existing operating system, continue with
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating a Bootable Array
6
In this chapter...
Making Your Array Bootable................................................................................................. 58
This chapter explains how to set your Adaptec controller to be the boot controller, and how to
create a bootable array.
Note: If you are completing a standard installation onto an existing operating system, you
don’t have to complete this task. Skip to Installing the Driver on an Existing Operating System
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6: Creating a Bootable Array
●
55
Setting the Boot Controller
Note: If your system won’t contain more than one bootable controller, skip to the next section,
Your Adaptec RAID controller supports bootable disk drives and bootable arrays. To enable
your system to boot from either a disk drive or an array connected to your controller:
1
2
3
Enter the system setup.
Navigate to the drive boot sequence.
Move the boot controller to the top of the list.
For more information, refer to your computer documentation.
Creating an Array
This section explains how to create an array.
A RAID 5 array is created in the examples shown in this section because RAID 5 provides the
most security and best performance with a minimum of three disk drives. However, you can
choose to create an array with a different RAID level; you can also change array level later, after
the operating system is installed.
You can create an array using any of these tools:
●
●
●
Array Configuration Utility (ACU)—BIOS-based menus and keyboard navigation (see
the following section).
Adaptec Storage Manager—Graphical software application (running from a bootable
ARCCONF—Command line utility. For instructions, refer to the Adaptec RAID Controller
Command Line Utility User’s Guide.
You can use either tool, but the ACU utility is the quicker and easier tool for this task.
Note: We recommend that you do not combine SAS and SATA disk drives within the same
array. Adaptec Storage Manager displays a warning if you try to create a logical drive using a
Creating an Array with the ACU
The ACU is menu-based and instructions for completing tasks appear on-screen. Menus can
be navigated using the arrows, Enter, Esc, and other keys on your keyboard.
To create a RAID 5 array:
1
Power on your computer. When prompted, press Ctrl+A to enter the ARC utility.
Note: During boot up, if your system has insufficient memory the following message will
display. “Adaptec RAID Configuration Utility will load after, system initialization. Please wait...
Or press <Enter> Key to attempt loading the utility forcibly [Generally, not recommended]”
2
3
If you have more than one controller of the same model or family in your computer, select
your controller, then press Enter.
Select Array Configuration Utility, then press Enter.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6: Creating a Bootable Array
●
56
4
5
Select Initialize Drives, then press Enter.
Select at least three disk drives for the array, press Insert for each selected disk drive, then
press Enter.
Caution: During initialization, all data is deleted from the disk. Before continuing,
back up any data you want to keep.
!
6
Press Y, then press Enter.
The selected disk drives are initialized, then the ACU screen appears.
Select Create Array, then press Enter.
7
8
Select the disk drives that were just initialized, press Insert for each selected disk drive,
then press Enter.
9
When the Array Properties screen opens, follow the instructions in the following table.
Property Line
Array Type
Entry or Selection
Select RAID 5, then press Enter.
Array Label
Array Size
Type a name, then press Enter.
Press Enter, then press Enter again to use the default granularity of GB.
Press Enter to use the default (256 KB).
Press Enter to use the default (Yes).
Press Enter to use the default (Enable always).
Stripe Size
Read Caching
Write Caching
Create RAID via Press Enter to use the default (Build/Verify).
MaxCache Read Press Enter to use the default (Enable Read)
[Done]
Press Enter.
10 When a cache warning message displays, type Y.
11 Once the array is created, a message displays telling you that the array can now be used.
Press any key to return to the ACU Menu.
You can start using the array immediately. However, performance is reduced until the
build process is complete.
12 Press Esc until the Exit utility window appears.
13 Select Yes, then press Enter.
The computer restarts.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6: Creating a Bootable Array
●
57
Creating an Array with Adaptec Storage Manager
This section describes how to use the Adaptec Storage Manager configuration wizard to build a
RAID 5 array.
Note: You will need the Adaptec Installation DVD to complete this task.
To create a RAID 5 array:
1
2
3
Insert the Adaptec Installation DVD into your DVD drive, then restart your computer.
When prompted, select the language you want, then press Enter.
Review the license information, then press Enter.
The main menu opens.
4
5
Click Launch Configuration Utility.
Adaptec Storage Manager opens.
Click Create.
The Configuration wizard opens.
6
Select Express configuration..., then click Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6: Creating a Bootable Array
●
58
7
Review the information that is displayed.
Note: In DAS environments, Adaptec Storage Manager uses the term logical drives when
In this example, Adaptec Storage Manager has used thirteen equal-sized disk drives to
automatically create one logical drive with RAID 5 and a hot spare.
To exclude specific disk drives from the logical drive, specify a size for the logical drive, or
to make other changes to the configuration, click Modify logical devices.
8
9
Click Apply, then click Yes when prompted to confirm applying your new configuration.
Adaptec Storage Manager builds the logical drive.
the physical disk drives.
Partition and format your logical drive.
The logical drive you created appears as a physical disk drive on your operating system.
You must partition and format these logical drives before you can use them to store data.
10 Close all windows, then click Reboot to restart your system.
11 Remove the Adaptec Installation DVD.
For information on installing and using Adaptec Storage Manager as a full software
application, refer to the Adaptec Storage Manager User’s Guide or online Help.
12 Continue with the following section.
Making Your Array Bootable
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Driver and an
Operating System
7
In this chapter...
Before You Begin .................................................................................................................... 60
Installing with Debian Linux................................................................................................. 63
This chapter explains how to install your Adaptec RAID controller driver and an operating
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7: Installing the Driver and an Operating System
●
60
Before You Begin
●
●
●
Create a driver disk (see the following section).
Note: Not all operating systems are supported on all controllers. For up-to-date operating
select Support>Knowledgebase>Find Answers. Select your controller type and OS to generate
a list of supported operating systems and to download the latest drivers.
Creating a Driver Disk
This section describes how to create a driver disk for most supported operating systems. You
will need a floppy disk, USB flash drive, or writable CD to complete this task.
Note: Some operating systems do not require a separate driver disk, including Windows Vista,
Windows Server 2008, and Windows 7; with these OSs, the driver is loaded right from the
Adaptec Installation DVD. For other operating systems, including VMware, Debian Linux, and
Ubuntu Linux, you must create the driver disk manually. Since the driver image is too large to fit
on a floppy disk, you must use a USB flash drive (“USB stick”) or a writable CD. For details, see
the instructions for your operating system, as described below.
To create a driver disk:
1
2
Set your system BIOS so that your computer boots from the DVD drive.
Turn on your computer, then insert the Adaptec Installation DVD included in your RAID
controller kit.
3
4
Click Create Diskette, then select your operating system and version.
When prompted, insert a floppy disk, then click OK.
The system creates the driver disk.
5
Remove and label the driver disk.
Continue with the instructions for your operating system:
●
●
●
●
●
●
●
●
●
●
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7: Installing the Driver and an Operating System
●
61
Installing with Windows
Note: You will need your Windows Installation CD to complete this task.
Installing with Windows Server 2003
To install the Adaptec RAID controller driver while installing Windows:
1
2
3
Insert your Windows CD, then restart the computer.
Follow the on-screen instructions to begin the Windows installation.
When prompted to install a third-party driver, press F6.
Note: When F6 is active, a prompt appears at the bottom of the screen for only 5 seconds.
If you miss your chance to press F6, restart your computer.
4
5
Insert the driver disk, then wait until you are prompted to install a driver.
Press S to specify that the driver is on a floppy disk, then press Enter.
The computer reads the disk.
6
7
8
When the Adaptec driver is found, press Enter.
Follow the on-screen instructions to complete the installation.
Installing with Windows Server 2008, Windows 7, or Windows Vista
To install the Adaptec RAID controller driver while installing Windows:
1
2
3
4
Insert your Windows CD, then restart the computer.
Follow the on-screen instructions to begin the Windows installation.
When prompted to specify a location for Windows, select Load Driver.
Insert the Adaptec Installation DVD, browse to the driver location, then click OK.
Note: The 64-Bit driver is located within the AMD64 folder.
5
When the Adaptec driver is found, press Next.
Note: With Adaptec Series 6 controllers, you may see the message ‘No drives were
attempt, the driver will load successfully.
6
Click Next again to accept the default partition configuration, or refer to your Windows
documentation to configure partitions manually.
7
8
Follow the on-screen instructions to complete the installation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7: Installing the Driver and an Operating System
●
62
Installing with Red Hat Linux 5
Note: You will need your Red Hat 5 Installation CD to complete this task.
To install the Adaptec RAID controller driver while installing Red Hat Linux 5:
1
2
3
4
5
6
7
Insert the first Red Hat Installation CD.
Restart your computer.
When the Red Hat Welcome screen appears, type linux dd at the Boot: prompt.
When prompted, insert the driver disk, then select OK.
Follow the prompts to set up the environment you want.
If you are installing other third-party devices, install them now. Otherwise, select Done.
Complete the Linux installation, following the instructions included with your operating
system.
8
Installing with Red Hat Linux 6 or Fedora Linux
Note: You will need your Red Hat 6 or Fedora Installation CD to complete this task. You must
have root privileges to install the driver image.
To install the Adaptec RAID controller driver while installing Red Hat 6 or Fedora Linux:
1
2
3
Insert the Red Hat or Fedora Installation CD.
Restart your computer.
When the Welcome screen appears, press Enter, wait for the graphical installation to begin,
then type CTRL+ALT+F2 to switch to the shell. Do not pass the linux dd boot prompt.
Do not click Next!
4
5
Insert the driver disk.
Type the following commands to load the controller driver:
mkdir /mnt2 /AACRAID
mount /dev/fd0 /mnt2
cp -r /mnt2/* /AACRAID
umount /mnt2
cd /AACRAID
sh ./fc-pre-install.sh
Note: These commands assume the floppy drive is assigned to /dev/fd0. Use fdisk -l to
list all devices.
6
7
Press ALT+F6 to switch back to the installation screen, then click Next.
Follow the on-screen prompts to continue the installation. When prompted to reboot the
system, press CTRL+ALT+F2 to switch to the console. Do not reboot!
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7: Installing the Driver and an Operating System
●
63
8
9
Type the following commands to complete the driver installation:
mkdir /mnt/sysimage/tmp/AACRAID
cp -r /AACRAID/* /mnt/sysimage/tmp/AACRAID
chroot /mnt/sysimage/
cd /tmp/AACRAID
sh ./fc-post-install.sh
exit
Press ALT+F6 to switch back to the installation screen, finish the installation, then reboot.
Installing with SuSE Linux
To install the Adaptec RAID controller driver while installing SuSE Linux:
1
2
3
Insert the first SuSE Installation CD.
Restart your computer.
When the SuSE installation selection screen appears, choose the type of installation you
want, then press the F6 key to indicate the use of a driver disk. (If F6 is not shown on the
screen, you may have an older version of SuSE; press the Alt key instead.)
4
5
6
7
When prompted, insert the driver disk, then press any key to continue.
Follow the prompts to set up the environment you want.
If you are installing other third-party devices, install them now. Otherwise, select Back.
Complete the Linux installation, following the instructions included with your operating
system.
Note: For SuSE Linux 11, switch to the console by typing CTRL+ALT+F2 when the
installation is 50%-90% complete, type this command:
cp -a /update/install /mnt/tmp
...then press CTRL+ALT+F7 to return to the installation screen and complete the
installation as usual.
8
Installing with Debian Linux
Note: You will need your Debian Installation CD and a USB flash drive to complete this task.
You must have root privileges to install the driver image.
To install the Adaptec RAID controller driver while installing Debian Linux:
1
Create the driver disk:
a
Insert and mount the Adaptec Installation DVD:
mount /dev/cdrom /mnt/cdrom
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7: Installing the Driver and an Operating System
●
64
b
c
Insert and mount a USB flash drive:
mount /dev/sda1 /mnt/aacraid-driver
Change to the Linux driver directory on the Adaptec Installation DVD, locate the .tgz
archive file for your Debian operating system version (32-bit or 64-bit), then extract
the contents of the archive to a temporary location.
d
e
Copy the contents of the archive to the USB drive by typing this command:
cp /<tempdir>/* /mnt/aacraid-driver
where tempdir is the temporary location of the driver files.
Unmount and remove the Adaptec Installation DVD and the USB drive.
2
3
Insert the Debian Installation CD, then restart your computer.
When the Welcome screen appears, select Graphical Install, then type CTRL+ALT+F2 to
switch to the console.
4
Insert the USB drive, then type the following command to scan for the device:
fdisk -l
Note: The following steps assume that the USB drive is assigned to /dev/sda1.
5
Type the following commands to begin loading the driver:
mkdir /mnt2 /AACRAID
mount /dev/sda1 /mnt2
cp -R /mnt2/* /AACRAID
umount /mnt2
6
Copy the driver file to the /lib/modules directory:
For Debian 32-bit:
cp -f /AACRAID/aacraid.ko-PRE_MOD /lib/modules/2.6.26-2-486/kernel/drivers/
scsi/aacraid/aacraid.ko
For Debian 64-bit:
cp -f /AACRAID/aacraid.ko /lib/modules/2.6.26-2-amd64/kernel/drivers/scsi/
aacraid/aacraid.ko
7
8
Remove the USB drive.
Install the loadable module:
For Debian 32-bit:
insmod /lib/modules/2.6.26-2-486/kernel/drivers/scsi/aacraid/aacraid.ko
For Debian 64-bit:
insmod /lib/modules/2.6.26-2-amd64/kernel/drivers/scsi/aacraid/aacraid.ko
9
Press CTRL+ALT+F5 to switch back to the installation screen, then follow the on-screen
prompts to continue the installation.
10 When prompted to reboot the system, press CTRL+ALT+F2 to switch to the console. Do
not reboot!
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7: Installing the Driver and an Operating System
●
65
11 Type the following commands to complete the driver installation:
For Debian 32-bit:
cp -f /AACRAID/aacraid.ko-POST_MOD /target/lib/modules/2.6.26-2-686/kernel/
drivers/scsi/aacraid/aacraid.ko
chroot /target
/sbin/depmod -a 2.6.26-2-686
update-initramfs -u -v
exit
For Debian 64-bit:
cp -f /AACRAID/aacraid.ko /target/lib/modules/2.6.26-2-amd64/kernel/drivers/
scsi/aacraid/aacraid.ko
chroot /target
/sbin/depmod -a 2.6.26-2-amd64
update-initramfs -u -v
exit
12 Press CTRL+ALT+F5 to switch back to the installation screen, then reboot.
Installing with Ubuntu Linux
Note: You will need your Ubuntu Installation CD and a USB flash drive to complete this task.
You must have root privileges to install the driver image.
To install the Adaptec RAID controller driver while installing Ubuntu Linux:
1
Create the driver disk:
a
Insert and mount the Adaptec Installation DVD:
mount /dev/cdrom /mnt/cdrom
b
c
Insert and mount a USB flash drive:
mount /dev/sda1 /mnt/aacraid-driver
Change to the Linux driver directory on the Adaptec Installation DVD, locate the .tgz
archive file for your Ubuntu operating system version (32-bit or 64-bit), then extract
the contents of the archive to a temporary location.
d
Copy the contents of the archive to the USB drive by typing this command:
cp /<tempdir>/* /mnt/aacraid-driver
where tempdir is the temporary location of the driver files.
e
Unmount and remove the Adaptec Installation DVD and the USB drive.
2
3
Insert the Ubuntu Installation CD, then restart your computer.
When the Welcome screen appears, select Install Ubuntu Server, then type
CTRL+ALT+F2 to switch to the console.
4
Insert the USB drive, then type the following command to scan for the device:
fdisk -l
Note: The following steps assume that the USB drive is assigned to /dev/sda1.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7: Installing the Driver and an Operating System
●
66
5
6
Type the following commands to begin loading the driver:
mkdir /mnt2 /AACRAID
mount /dev/sda1 /mnt2
cp -R /mnt2/* /AACRAID
umount /mnt2
Copy the driver file to the /lib/modules directory:
cp -f /AACRAID/aacraid.ko-PRE_MOD /lib/modules/2.6.<version>-generic/kernel/
drivers/scsi/aacraid/aacraid.ko
where <version> is 32-24 for Ubuntu 10.x and 38-8 for Ubuntu 11.x.
Remove the USB drive.
7
8
Install the loadable module:
insmod /lib/modules/2.6.<version>-generic/kernel/drivers/scsi/aacraid/
aacraid.ko
where <version> is 32-24 for Ubuntu 10.x and 38-8 for Ubuntu 11.x.
9
Press CTRL+ALT+F1 to switch back to the installation screen, then follow the on-screen
prompts to continue the installation.
10 When prompted to reboot the system, press CTRL+ALT+F2 to switch to the console. Do
not reboot!
11 Type the following commands to complete the driver installation:
For Ubuntu 32-bit:
cp -f /AACRAID/aacraid.ko-POST_MOD /target/lib/modules/2.6.<version>-generic-
pae/kernel/drivers/scsi/aacraid/aacraid.ko
chroot /target
/sbin/depmod -a 2.6.<version>-generic-pae
update-initramfs -u -v
exit
where <version> is 32-24 for Ubuntu 10.x and 38-8 for Ubuntu 11.x.
For Ubuntu 64-bit:
cp -f /AACRAID/aacraid.ko-POST_MOD /target/lib/modules/2.6.<version>-server/
kernel/drivers/scsi/aacraid/aacraid.ko
chroot /target
/sbin/depmod -a 2.6.<version>-server
update-initramfs -u -v
exit
where <version> is 32-24 for Ubuntu 10.x and 38-8 for Ubuntu 11.x.
12 Press CTRL+ALT+F1 to switch back to the installation screen, then reboot.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7: Installing the Driver and an Operating System
●
67
Installing with Solaris
Note: This task is not necessary if you are installing Solaris 10 Update 2 or later. Instead, you
can choose to install Solaris using the in-box driver and update it either during or after the
installation is complete, if required.
Note: For systems without a floppy drive, you can create a driver disk by burning a CD with the
aac_solaris-x86.iso file, available on the Adaptec Installation DVD.
To install the Adaptec RAID controller driver while installing Solaris:
1
2
Start your computer.
Interrupt the autoboot, press the ESC key. The Device Configuration Assistant (DCA)
Utility will open.
3
4
5
Select Apply driver updates.
Insert the driver floppy disk or other update media, then press Return.
Complete the Solaris installation, following the instructions included with your operating
system.
Installing with VMware ESX 4
Note: Use the following procedure to install the controller driver for an Adaptec Series 6
controller with VMware ESX 4.x. This task is not necessary if you are installing the driver with
an Adaptec Series 2 or Series 5 controller. Instead, you can choose to install VMware ESX 4.x
using the in-box driver (which supports Series 2 and Series 5 controllers directly) and update it
either during or after the installation is complete, if required.
Note: You will need your VMware Installation CD and a writable CD to complete this task. You
must have root privileges to create the driver disk and install the driver image.
To install the Adaptec RAID controller driver when installing VMware ESX 4.x:
1
Create the driver disk:
a
Insert and mount the Adaptec Installation DVD:
mount /dev/cdrom /mnt/cdrom
b
c
Insert and mount a writable CD:
mount /dev/cdrom1 /mnt/cdrom1
Change to the Linux driver directory on the Adaptec Installation DVD, locate the
VMware iso image, vmware-aacraid-400.4.1.7.28300-esx4.1.iso, then burn the iso
to the CD.
Note: Use whatever tool you prefer to burn the CD, such as an interactive (GUI-based)
tool or the Linux command line.
d
Unmount and remove the Adaptec Installation DVD and the driver CD.
2
3
4
Insert the VMware Installation CD.
Restart your computer.
Follow the on-screen instructions to begin the VMware installation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7: Installing the Driver and an Operating System
●
68
5
6
7
Select Yes to install a custom driver, then click Add.
Insert the driver disk, then click OK.
Select the driver from the displayed list, click OK, then follow the on-screen instructions to
load the driver.
8
9
Complete the VMware installation, following the on-screen instructions.
Reboot your computer, then remove the VMware Installation CD.
Note: You may see a warning that the controller driver is not certified by VMware (no
signature attached). You can ignore this message.
Installing with VMware ESXi 5
Note: Use the following procedure to install the controller driver for an Adaptec Series 6
controller with VMware ESXi 5. This task is not necessary if you are installing the driver with an
Adaptec Series 2 or Series 5 controller. Instead, you can choose to install VMware ESXi 5
using the in-box driver (which supports Series 2 and Series 5 controllers directly) and update it
either during or after the installation is complete, if required.
To install the Adaptec RAID controller driver with VMware ESXi 5, you must create a custom
boot image using the VMware Image Builder. The VMware Image Builder is distributed as a
snap-in component for vSphere PowerCLI, a command-line and scripting tool from VMware
based on Microsoft PowerShell.
You can download PowerCLI from the VMware Download Center at www.vmware.com/
downloads. To perform the installation, you will also need to download the VMware ESXi5.0
Standard Software Depot from the VMware Download Center.
Note: You will need a writable CD to complete this task. You must have administrator
privileges to create the driver disk and install the driver image.
want to install the custom image. Be sure to install the prerequiste software first, including
Powershell and Microsoft .NET 2.0, before you install PowerCLI or start to create the custom
boot image.
To install the Adaptec RAID controller driver when installing VMware ESXi 5:
1
Download Microsoft PowerShell and Microsoft .NET 2.0 (if not installed on your machine
already) and install on your Windows build machine. You can download PowerShell and
Microsoft .NET from the Microsoft Download Center at www.microsoft.com/download.
Note: PowerShell is preinstalled on Windows 2008 and Windows 7 systems.
2
3
Run PowerShell as Administrator, then set the execution policy to Remote Signed:
# Set-ExecutionPolicy RemoteSigned
Download and install vSphere PowerCLI on your Windows build machine. You can
download PowerCLI from the VMware Download Center at www.vmware.com/
downloads (for example, VMware-PowerCLI-5.0.0-374833.exe).
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7: Installing the Driver and an Operating System
●
69
4
Download the VMware ESXi5.0 Standard Software Depot (for example, vmware-ESXi-
5.0.0-469512-depot.zip) and store in a temporary location on your Windows build
machine. You can download the software depot from the VMware Download Center at
www.vmware.com/downloads; when you start the download, be sure to choose “ESXi
Offline Bundle”.
Note: You may need to provide account credentials to download the software depot from
the VMware Web site.
5
6
Insert the Adaptec Installation DVD, navigate to the Linux driver folder, then copy the
Adaptec AACRAID driver binary, aacraid-esxi5.0-1.1.7.28400.zip, to a temporary
location on the Windows build machine.
Note: The version string in the file name may differ from the one above.
After you copy the file, remove the Adaptec Installation DVD.
Launch vSphere PowerCLI, then follow the steps below to create the custom boot image:
a
At the PowerCLI prompt, add the VMware Image Builder snap-in by running the
following cmdlet:
# Add-PSSnapIn VMware.ImageBuilder
Note: You will see a message if the Image Builder snap-in is already installed. You can
ignore this message.
b
c
Add the VMware ESXi5.0 Software Depots:
# Add-EsxSoftwareDepot C:\ESXi5.0-PMC-CustomISO\vmware-ESXi-5.0.0-469512-
depot.zip
where C:\ESXi5.0-PMC-CustomISO is the temporary folder on your build machine
where the software depot is stored.
Add the AACRAID driver binary as a software depot:
# Add-EsxSoftwareDepot C:\ESXi5.0-PMC-CustomISO\aacraid-esxi5.0-
1.1.7.28400.zip
where C:\ESXi5.0-PMC-CustomISO is the temporary folder on your build machine
where the software depot is stored.
d
e
Verify that the software depots are added:
# $DefaultSoftwareDepots
List ESX Image Profiles:
# Get-EsxImageProfile
You should see a display like this:
ESXi-5.0.0-469512-no-tools
ESXi-5.0.0-469512-standard
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7: Installing the Driver and an Operating System
●
70
f
Create a copy of the standard image profile, using the -CloneProfile option:
# New-EsxImageProfile -CloneProfile ESXi-5.0.0-469512-standard -Name "ESXi
5.0 Adaptec Series 6"
g
h
Change the vendor and acceptance level of the new image profile:
# Set-EsxImageProfile -ImageProfile "ESXi 5.0 Adaptec Series 6" -vendor
PMC-Sierra -AcceptanceLevel communitysupported
Check if the new driver package is available:
# Get-EsxSoftwarePackage
You should see a line like this:
scsi-aacraid 5.0.5.1.7.28400-1OEM.500.0… Adaptec
19.08.2011
i
j
Add the scsi-aacraid software package to the new image profile:
# Add-EsxSoftwarePackage -ImageProfile "ESXi 5.0 Adaptec Series 6"
-SoftwarePackage scsi-aacraid
Export the custom ISO image:
# Export-EsxImageProfile -ImageProfile "ESXi 5.0 Adaptec Series 6"
-FilePath C:\ESXi5.0-PMC-CustomISO\ESXi5.0-PMC-Sierra-Series-6.iso
-ExportToISO
where -FilePath specifies the path to the custom iso image (C:\ESXi5.0-PMC-
CustomISO\ESXi5.0-PMC-Sierra-Series-6.iso in this example).
7
Burn the custom ISO image to a writable CD.
Note: Use whatever tool you prefer to burn the CD, such as an interactive (GUI-based) tool
or a command line tool.
Remove the CD after you finish burning the image.
8
9
On the VMware ESXi machine, insert the custom boot CD, then restart your computer.
Follow the on-screen instructions to begin the VMware installation.
10 Complete the VMware installation, following the on-screen instructions.
11 Remove the custom boot CD, then reboot your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7: Installing the Driver and an Operating System
●
71
Installing with FreeBSD
Note: You will need your FreeBSD Installation CD to complete this task.
To install the Adaptec RAID controller driver when installing FreeBSD:
1
2
3
4
5
6
Insert the FreeBSD Installation CD.
Restart your computer.
When the FreeBSD start screen opens, select 6 to escape to loader prompt.
Type load kernel
.
Insert the driver floppy disk.
Type this command:
load disk0:aacu.ko
Note: If the driver fails to load, run lsdev and check for the floppy disk drive. Then, try
again with the appropriate device.
7
8
Type boot.
Complete the FreeBSD installation, following the instructions included with your
operating system.
9
Reboot your computer, then remove the driver disk.
10 Repeat Steps 3 through 7 the first time you boot the operating system to load the driver
again.
for updating the driver on an existing FreeBSD installation. Alternatively, you can statically
link the driver. See your operating system documentation for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Driver on an Existing
Operating System
8
In this chapter...
Before You Begin .................................................................................................................... 73
Installing on Red Hat, SuSE, or Fedora Linux...................................................................... 74
Installing on Debian Linux.................................................................................................... 75
Installing on Ubuntu Linux................................................................................................... 75
This chapter explains how to install your Adaptec RAID controller driver.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8: Installing the Driver on an Existing Operating System
●
73
Before You Begin
Before you begin, install and connect your Adaptec RAID controller and internal disk drives
You must also create a driver disk before you begin installing the controller driver.
Note: Not all operating systems are supported on all controllers. For up-to-date operating
select Support>Knowledgebase>Find Answers. Select your controller type and OS support to
generate a list of supported operating systems and to download the latest drivers.
Creating a Driver Disk
This section describes how to create a driver disk for most supported operating systems. You
will need a floppy disk to complete this task.
Note: Some operating systems do not require a separate driver disk; they load the driver right
from the Adaptec Installation DVD or from the OS installation CD (Debian, for instance). For
other operating systems, such as VMware and FreeBSD, you must copy the driver from the
installation DVD and install it from the local system.
To create a driver disk:
1
Set your system BIOS so that your computer boots from the DVD drive. (For instructions,
refer to your computer documentation.)
2
Turn on your computer, then insert the Adaptec Installation DVD included in your RAID
controller kit.
3
4
Click Create Diskette, then select your operating system and version.
When prompted, insert a floppy disk, then click OK.
The system creates the driver disk.
5
Remove and label the driver disk.
Continue with the instructions for your operating system:
●
●
●
●
●
●
●
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8: Installing the Driver on an Existing Operating System
●
74
Installing on Windows
Follow the instructions in this section for your version of Windows.
Installing on Windows Server 2003
To install the driver on Windows:
1
Start or restart Windows.
The Found New Hardware Wizard opens and searches for the driver.
Insert the driver disk, select Floppy drive, then click Next.
Click Next, then click Next again.
2
3
4
5
6
Follow the on-screen instructions to complete the driver installation.
Remove the driver disk and restart your computer.
Installing on Windows Server 2008, Windows 7, or Windows Vista
1
Start or restart Windows.
The Found New Hardware Wizard opens and searches for the driver.
2
Insert the driver disk, then select Locate and Install Driver Software.... and Don’t Search
Online.
3
4
5
Click Next, then click Close.
When the installation is complete, remove the driver disk and restart your computer.
Installing on Red Hat, SuSE, or Fedora Linux
To install the driver on Red Hat Linux, SuSE Linux, or Fedora Linux:
1
Insert and mount the Adaptec Installation DVD:
Red Hat: mount /dev/cdrom /mnt/cdrom
SuSE:
mount /dev/cdrom /media/cdrom
Fedora: mount /dev/hdc /mnt/cdrom
2
Install the module RPM:
rpm -ivh mount-point/xxx/yyy.rpm
where mount-point is the specific mount point on the Linux system, xxx is the driver path,
and yyy.rpm is the rpm file.
3
4
5
Reboot your computer to ensure the driver loaded correctly.
Run fdisk, mkfs, and create mount points for any new disk drives.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8: Installing the Driver on an Existing Operating System
●
75
Installing on Debian Linux
Note: You must have root privileges to install the driver image. For Debian Linux, the su
command is sufficient.
To install the driver on Debian Linux:
1
2
3
Insert and mount the Debian Installation DVD:
mount /dev/cdrom /mnt/cdrom
Load the Debian unpacking tools:
apt-get install build-essential
Install the DEB driver package:
For Debian Linux 5.x:
dpkg -i aacraid-Debian+Ubuntu-all.deb
For Debian Linux 6.x:
dpkg -i aacraid-Debian6.0-all.deb
4
5
Reboot your computer to ensure the driver loaded correctly.
Installing on Ubuntu Linux
Note: For driver installation on Ubuntu Linux, you may need to create the root account and
password. Enter these commands: sudo bash; sudo passwd root. You must have root
privileges to install the driver image.
To install the driver on Ubuntu Linux:
1
2
3
Update the Ubuntu package index:
sudo apt-get update
Load the Ubuntu unpacking tools:
sudo apt-get install build-essential
Install the DEB driver package:
For Ubuntu Linux 10.x:
sudo dpkg -i aacraid-Debian+Ubuntu-all.deb
For Ubuntu Linux 11.x:
sudo dpkg -i aacraid-Ubuntu11.04-all.deb
4
5
Reboot your computer to ensure the driver loaded correctly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8: Installing the Driver on an Existing Operating System
●
76
Installing on Solaris
To install the driver on Solaris:
1
Start your computer.
2
(Solaris 10 only) Check for any pre-existing Adaptec driver by performing a pkginfo
SUNWaacin a terminal window . If there is no pre-existing Adaptec driver on your
computer, continue with Step 3. If an Adaptec driver is already installed on your
computer, perform a pkgrm SUNWaacto remove it.
Caution: If your operating system currently boots from the Adaptec controller, do not
reset your computer after you remove the pre-existing Adaptec driver. Instead, follow
the steps in this section to install a new driver before rebooting your computer.
!
3
4
Insert and mount the driver disk:
volcheck
Change to the driver installer directory:
On Solaris 10:
cd /rmdisk/aacraid/DU/sol_210/i86pc/Tools
On Solaris 11:
cd /rmdisk/aacraid/DU/sol_211/i86pc/Tools
5
Start the driver installer:
./install.sh -i
6
7
Remove the driver disk, then reboot your computer.
Installing on VMware
Note: You must remove the old driver before you can install the new one. You must have root
privilege to install the new driver.
have access to a remote copy utility, such as WinSCP, putty, or Linux scp.
To install the driver on VMware:
1
At the VMware console screen, type these commands to remove the old driver:
VMware ESX/ESXi 4.1:
esxupdate query --vib-view | grep -i aacraid (list driver packages)
esxupdate -b <vibID>--maintenancemode remove
(remove package)
where vibID is the full name of the driver package.
Note: For VMware 4.0 or earlier, use the rpm -e command to remove the driver.
VMware ESXi 5:
esxcli software vib list
(list driver packages)
esxcli software vib remove --vibname=scsi-aacraid --maintenance-mode (remove
package)
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8: Installing the Driver on an Existing Operating System
●
77
2
Using a remote copy utility, copy the driver VIB file for your operating system version
from the Linux driver folder on the installation DVD to a local directory on the ESX
server. This example uses Linux scp to copy the driver to /tmp/aacraid:
VMware ESX 4:
scp /mnt/cdrom/linux/driver/vmware-esx-drivers-scsi-aacraid-400.4.1.7.28300-
1.0.4.260247.x86_64.vib root@<esx-server-ip>:/tmp/aacraid
VMware ESXi 4:
scp /mnt/cdrom/linux/driver/vmware-esxi-drivers-scsi-aacraid-400.4.1.7.28300-
1.0.4.260247.x86_64.vib root@<esx-server-ip>:/tmp/aacraid
VMware ESXi 5:
scp /mnt/cdrom/linux/driver/vmware-esxi-drivers-scsi-aacraid-
500.5.1.7.28300.-1.0.5.406165.x86_64.vib root@<esx-server-ip>:/tmp/aacraid
Note: Due to file name limits on the installation DVD, the “_64.vib” portion of the file
name may be truncated and not visible. Also, the version string may be different from
above.
3
Install the VIB module:
VMware ESX 4:
esxupdate -b /tmp/aacraid/vmware-esx-drivers-scsi-aacraid-400.4.1.7.28300-
1.0.4.260247.x86_64.vib --nodeps --nosigcheck --maintenancemode update
VMware ESXi 4:
esxupdate -b /tmp/aacraid/vmware-esxi-drivers-scsi-aacraid-400.4.1.7.28300-
1.0.4.260247.x86_64.vib --nodeps --nosigcheck --maintenancemode update
VMware ESXi 5:
esxcli software vib install -f -v file:/tmp/aacraid/vmware-esxi-drivers-scsi-
aacraid-500.5.1.7.28300.-1.0.5.406165.x86_64.vib
4
Reboot your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8: Installing the Driver on an Existing Operating System
●
78
Installing on FreeBSD
To install the driver on FreeBSD:
Start your computer.
Insert and mount the driver disk:
1
2
mount -t msdos /dev/fd0 /mnt
3
4
Copy the driver package to the /tmp directory:
cp /mnt/aac8x-i386.tgz /tmp
Install the driver package:
pkg_add /tmp/aac8x-i386.tgz
5
6
Remove the driver disk, then reboot your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing Your Storage Space
9
In this chapter...
About Adaptec Storage Manager........................................................................................... 80
Once you have installed your Adaptec RAID controller, disk drives (or other devices), and
device driver, you can begin to build and manage your storage space.
This chapter introduces Adaptec Storage Manager, and describes the other utilities included
with your Adaptec RAID controller.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9: Managing Your Storage Space
●
80
About Adaptec Storage Manager
Adaptec Storage Manager is a full-featured software application that helps you build a storage
space for your online data, using Adaptec RAID controllers and disk drives.
With Adaptec Storage Manager, you can group disk drives into logical drives and build in
redundancy to protect your data and improve system performance.
From a single workstation, you can use Adaptec Storage Manager to monitor and manage all
the controllers and disk drives in your storage space.
When Adaptec Storage Manager is installed on a computer, the Adaptec Storage Manager agent
is also installed automatically. The agent is like a service that keeps your storage space running.
It’s designed to run in the background, without user intervention, and its job is to monitor and
manage system health, event notifications, task schedules, and other on-going processes on
that system. It sends notices when tasks are completed successfully, and sounds an alarm when
errors or failures occur on that system.
The agent uses less memory than the full application. If your storage space includes systems
that won’t be connected to monitors (and therefore won’t require the user interface), you can
choose to run the agent only on those systems instead of the full application. For more
information, refer to the Adaptec Storage Manager online Help, or to the Adaptec Storage
Manager User’s Guide on the Adaptec Installation DVD.
Installing Adaptec Storage Manager
Adaptec Storage Manager is included on the Adaptec Installation DVD. For installation
instructions, refer to the Adaptec Storage Manager User’s Guide, also included on the
installation DVD.
About the Adaptec RAID Controller Configuration Utility
The Adaptec RAID Controller Configuration (ARCCONF) is a command line utility that you
can use to perform basic array and configuration management functions.
With ARCCONF, you can:
●
●
●
Create and delete logical drives
Modify and copy configuration settings
Recover from disk drive failures and troubleshoot your system
ARCCONF is described in the Adaptec RAID Controller Command Line Utility User’s Guide,
which is included on the Adaptec Installation DVD.
Note: The distribution includes a command line utility for VMware systems called Remote
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9: Managing Your Storage Space
●
81
About the Adaptec RAID Configuration Utility
The Adaptec RAID Configuration (ARC) utility is a BIOS-based utility that you can use to
create and manage controllers, disk drives and other devices, and arrays. The ARC utility
comprises these tools:
●
Array Configuration Utility (ACU)—For creating and managing arrays, and initializing
and rescanning disk drives.
●
●
SerialSelect—For modifying your controller and disk drive settings.
Disk Utilities—For formatting or verifying disk drives.
The ARC utility is included in your controller’s BIOS. For more information, see Using the
Note: The ARC utility is primarily intended for preoperating system installation configuration.
About the Adaptec Flash Utility
The Adaptec Flash Utility (AFU) is a text-based DOS utility that you can use to update, save, or
verify your RAID controller’s firmware BIOS and Non-Volatile Random Access Memory
(NVRAM).
Caution: Although the AFU contains safeguards to prevent you from accidentally damaging
your RAID controller’s flash contents, it is still important to use the AFU carefully and
!
correctly to avoid rendering your RAID controller inoperable. We recommend that only
advanced users familiar with working in DOS use the AFU. You can also use Adaptec
Storage Manager to update the controller firmware/BIOS. See the Adaptec Storage
Manager User’s Guide for more information.
Which Utility Should I Use?
For subsequent storage management tasks on most supported operating systems, we
software application with a graphical user interface, it is the easiest to use and offers the widest
range of management functions.
Note: If your Adaptec RAID controller is connected to a VMware system, your choice of
management utilities varies, depending on which version of VMware you are running; see Which
Which Utility Should I Use on VMware?
VMware storage management options vary, depending on which version of the operating
system you are running:
●
On VMware ESX 4.1 and VMware ESX 4.0 systems:
●
You can install the Adaptec Storage Manager Agent (only) on the VMware ESX system,
then from a Windows or Linux machine running the Adaptec Storage Manager GUI,
you can connect to the VMware system and configure and manage arrays from the
remote ASM GUI.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9: Managing Your Storage Space
●
82
●
Additionally, you can use the ARCCONF command line utility to configure and
manage arrays from the VMware ESX console.
For information on installing the Adaptec Storage Manager Agent and ARCCONF on
VMware ESX 4.x systems, see the Adaptec Storage Manager User’s Guide and the Command
Line Utility User’s Guide, included on the installation DVD.
●
On VMware ESXi 5.0 and VMware ESXi 4.1 systems:
●
You can install the Adaptec CIM Provider on the VMware ESXi system, then from a
Windows or Linux Guest OS, you can install Remote ARCCONF—a version of the
command line utility designed specifically for VMware ESXi.
●
●
After you install Remote ARCCONF, you can configure and manage arrays from a
Windows or Linux Guest OS running on your VMware ESXi system.
Additionally, on a Linux Guest OS, you can use the configUtil.sh utility to manage
email notifications to help you monitor activity in your storage space.
For information on installing the Adaptec CIM Provider and Remote ARCCONF on a
VMware ESXi 5.0 or VMware ESXi 4.1 system, see the Command Line Utility User’s Guide,
included on the installation DVD.
Download from Www.Somanuals.com. All Manuals Search And Download.
Solving Problems
10
In this chapter...
Troubleshooting Checklist..................................................................................................... 84
Silencing the Alarm................................................................................................................ 84
Recovering from a Disk Drive Failure................................................................................... 85
Resetting the Controller......................................................................................................... 86
This chapter provides basic troubleshooting information and solutions for solving controller
problems.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10: Solving Problems
●
84
Troubleshooting Checklist
If you encounter difficulties installing or using your Adaptec RAID controller, check these
items first:
●
With your computer powered off, check the connections to each disk drive, power supply,
LED connector, and so on.
Try disconnecting and reconnecting disk drives from the Adaptec RAID controller.
●
Check that your Adaptec RAID controller is installed in a compatible PCIe expansion slot.
●
●
Ensure that your Adaptec RAID controller is firmly seated and secured in the PCIe
expansion slot.
If your Adaptec RAID controller is not detected during system boot, try installing it in a
●
●
●
Did the driver install correctly?
If you have external disk drives (or other devices), are they powered on?
Check the Readme on the installation DVD for compatibility issues and known problems.
If you are still unable to resolve a problem, you can find additional troubleshooting
Monitoring Disk Drives Status
You can use the ‘blink’ feature of Adaptec Storage Manager to monitor the status of your SAS
and SATA disk drives. When you blink a specific disk drive or set of disk drives, the LED(s) on
the selected disk drives flash.
This table describes the LED flash states.
Controller Device State
Slot State
LED Flash State
On
Failed
Device is faulty
Device is rebuilding
Identify the device
No error
Rebuilding
Blink
Slow flash
Fast flash
Off
Other
information about using Adaptec Storage Manager to monitor your disk drives, refer to the
Adaptec Storage Manager User’s Guide or the online Help.
Silencing the Alarm
If your Adaptec RAID controller includes an alarm, the alarm will sound when an error occurs. To
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10: Solving Problems
●
85
Recovering from a Disk Drive Failure
This section explains how to recover when a disk drive fails:
●
●
●
●
●
●
Note: Adaptec Storage Manager uses the term logical drives or logical devices when referring
Failed Disk Drive Protected by a Hot Spare
When an array is protected by a hot spare, if a disk drive in that array fails the hot spare is
automatically incorporated into the array and takes over for the failed drive.
To recover from the failure:
1
2
Remove and replace the failed disk drive.
If copyback is not enabled—In Adaptec Storage Manager, remove the ‘hot spare’
designation from the original hot spare (the disk drive that was built into the array). Then,
designate a new hot spare to protect the arrays on that controller.
If copyback is enabled—Data is automatically moved back to its original location once the
controller detects that the failed drive has been replaced. No action is required.
Failed Disk Drive Not Protected by a Hot Spare
When a array is not protected by a hot spare, if a disk drive in that array fails, remove and
replace the failed disk drive. The controller detects the new disk drive and begins to rebuild the
array.
If the controller fails to rebuild the array, check that the cables, disk drives, and controllers are
properly installed and connected. Make sure that the new disk drive is equal or greater in size
than the failed disk drive. Then, if necessary, use Adaptec Storage Manager to rebuild the array.
For instructions, refer to the Adaptec Storage Manager User’s Guide or online Help.
Failure in Multiple Arrays Simultaneously
If there’s a disk drive failure in more than one array at the same time (one failure per array),
and the arrays have hot spares protecting them, the controller rebuilds the arrays with these
limitations:
●
A hot spare must be of equal or greater size than the failed disk drive it’s replacing.
●
Failed disk drives are replaced with hot spares in the order in which they failed. (The array
that includes the disk drive that failed first is rebuilt first, assuming an appropriate hot
spare is available—see bullet above.)
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10: Solving Problems
●
86
If there are more disk drive failures than hot spares, see Failed Disk Drive Not Protected by a Hot
If copyback is enabled, data is moved back to its original location once the controller detects
that the failed drive has been replaced.
Disk Drive Failure in a RAID 0 Array
Because RAID 0 volumes do not include redundancy, if a disk drive fails in a RAID 0 array, the
data can’t be recovered.
Correct the cause of the failure or replace the failed disk drives. Then, restore your data (if
available).
Multiple Failures in the Same Array
same time in the same array, the data normally can’t be recovered.
You may be able to recover the data by forcing the logical drive online or by recreating the
the command-line utility, ARCCONF, or Adaptec Storage Manager. For more information,
refer to the Adaptec RAID Controller Command Line Interface User’s Guide and the Adaptec.
Storage Manager User’s Guide.
Note: In some instances, RAID 10 and RAID 50 arrays may survive multiple disk drive failures,
depending on which disk drives fail.
Failed Drive in maxCache Pool
Because Solid State Drives (SSD) in the maxCache pool are used just for caching, not
permanent storage, no data recovery or rebuilding is necessary. Once you identify the failed
SSD, for example, by using Adaptec Storage Manager’s rapid fault isolation feature, replace the
Resetting the Controller
This section explains how to reset, or Mode 0 flash, your Adaptec RAID controller. You may
want to do this if the controller becomes inoperable, or if a firmware upgrade is unsuccessful.
Note: Mode 0 flash is supported on Adaptec Series 2 and Adaptec Series 5 controllers only.
Adaptec Series 6 controllers support HDA mode flash. For information about HDA mode, see
the Readme on the installation DVD or contact your support representative. To locate the HDA
To reset your Adaptec RAID controller:
1
Download the firmware version currently installed on your controller from
www.adaptec.com.
2
Extract the down-loaded files to a folder on your local hard drive (for example,
C:\Download\Drivers).
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10: Solving Problems
●
87
3
Copy the file AFU.exe (from the Adaptec Installation DVD) and the firmware image files
(typically *.ufi) to a bootable DOS floppy disk, USB flash drive, or writable CD-ROM.
Note: Due to space limitations with floppy disks, you may need to create multiple floppy
disks for each firmware image.
4
5
Power off your computer, disconnect the power cord, then open the cabinet following the
manufacturer’s instructions.
Disconnect all cables from the controller, then attach a shorting jumper to the Mode 0
flash connector.
Note: To locate the Mode 0 flash connector on your Adaptec RAID controller, see the
6
7
Reconnect the power cord, power on your computer, then boot to the drive containing the
AFU.exe file (see Step 3).
At the prompt, type <drive-letter>:\afu update /c x
where drive-letteris the drive identifier (
a
for a floppy drive, for instance) and is the
x
controller number.
Note: You will be prompted to insert other disks, as needed.
8
9
When the flash is complete, power off your computer, disconnect the power cord, then
remove the jumper.
Close the computer cabinet, reconnect the power cord, then power on your computer.
The controller should boot correctly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction to SAS
A
In this appendix...
Terminology Used in This Chapter ....................................................................................... 89
How Do SAS Devices Communicate?................................................................................... 90
What’s a SAS Connector?....................................................................................................... 91
What do SAS Cables Look Like?............................................................................................ 91
How are Disk Drives Identified in SAS?................................................................................ 92
This section provides a basic overview of the main features of SAS, introduces some common
SAS terms, and explains how SAS differs from parallel SCSI.
Note: For technical articles and tutorials about SAS, refer to the SCSI Trade Association
(STATM) Web site at www.scsita.org.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Introduction to SAS
●
89
Terminology Used in This Chapter
For convenience, SAS HBAs and SAS RAID controllers are referred to generically in this
chapter as SAS cards. HBAs, RAID controllers, disk drives, and external disk drive enclosures
are referred to as end devices and expanders are referred to as expander devices.
For convenience, this chapter refers to end devices and expander devices collectively as SAS
devices.
What is SAS?
Legacy parallel SCSI is an interface that lets devices such as computers and disk drives
communicate with each other. Parallel SCSI moves multiple bits of data in parallel (at the same
time), using the SCSI command set.
SAS is an evolution of parallel SCSI to a point-to-point serial interface. SAS also uses the SCSI
command set, but moves multiple bits of data one at a time. SAS links end devices through
direct-attach connections, or through expander devices.
SAS cards can typically support up to 128 end devices and can communicate with both SAS
and SATA devices. (You can add 128 end devices—or even more—with the use of SAS
93), we recommend that you not combine SAS and SATA disk drives within the same array or
logical drive. The difference in performance between the two types of disk drives may adversely
affect the performance of the array.
Data can move in both directions simultaneously across a SAS connection (called a link—see
page 90). Link speed is 300 MB/sec in half-duplex mode. Therefore, a SAS card with eight links
has a bandwidth of 2400 MB/sec.
Although they share the SCSI command set, SAS is conceptually different from parallel SCSI
physically, and has its own types of connectors, cables, connection options, and terminology,
as described in the rest of this chapter.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Introduction to SAS
●
90
How Do SAS Devices Communicate?
SAS devices communicate with each other through links. A link is a physical connection
between two phys.
and each phy contains one transmitter and one receiver—one transceiver. A phy can belong to
one port only.
SAS Device
Narrow
SAS Device
link
Transmitter
Narrow
Receiver
Transmitter
Phy
Phy
Receiver
Port
Port
SAS Device
Phy
Transmitter
Receiver
Phy
Phy
Wide
Port
Receiver
Transmitter
Transmitter
Receiver
Wide
Port
Receiver
Transmitter
Phy
SAS Device
Transmitter
Receiver
Receiver
Transmitter
Phy
Phy
Phy
Phy
Phy
Phy
Phy
Phy
Transmitter
Receiver
Receiver
Transmitter
Wide
Port
Wide
Port
Transmitter
Receiver
Receiver
Transmitter
Transmitter
Receiver
Receiver
Transmitter
What’s a Phy?
Phys are part of the physical communication connection between SAS devices. Each phy
contains a transceiver that sends data back and forth between SAS devices.
When a connection is formed between two end devices, a link is established from a phy in one
port to a phy in the other port. As shown in the figure above, a wide port can support multiple
independent links simultaneously.
SAS cables physically connect one or more phys on one SAS device to one or more phys on
another SAS device.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Introduction to SAS
●
91
What’s a SAS Port?
Note: Because the physical link between SAS devices is from phy to phy, rather than port to
port, a “port” is more of a virtual concept, different from what is normally considered a port on
other types of RAID controllers and storage devices.
A port is one or more phys. A narrow port contains one phy. A wide port typically contains four
phys.
same SAS address.
SAS card port options vary. A SAS card with four phys could be configured with one wide port,
with two wide ports that comprise two phys, or with four narrow ports each containing one
phy. (A wide port with four phys is referred to as a 4-wide or 4x port.)
What’s a SAS Address?
Each SAS port is identified with a unique SAS address, which is shared by all phys on that port.
For example, a SAS disk drive might have two narrow ports. Each port has one unique SAS
address. The single phy in each port uses its port’s SAS address.
In another example, a SAS device might have one 4-wide port. That port has one SAS address,
which is shared by all four phys in the port.
Unlike SCSI devices and SCSI IDs, SAS devices self-configure their SAS addresses. User
intervention is not required to set SAS addresses, and SAS addresses cannot be modified.
What’s a SAS Connector?
A SAS or mini-SAS connector is the physical plug or receptacle that you see on a SAS device.
It’s what you plug a SAS cable into, or the end of the SAS cable that’s being plugged in. (See
A connector is what forms physical links between phys. Some SAS connectors can support
multiple links. The number of links a SAS connector can support is referred to as its width.
Narrow connectors support a single link; wide connectors supports more than 1 link.
A single SAS device may have one or more connectors. A single SAS connector may help form
4-wide internal SAS connector forms links with four independent disk drives.)
What do SAS Cables Look Like?
Internal standard SAS cables are narrower than internal parallel SCSI cables. The connectors
vary in size depending on the number of links they support, from single link connectors to
4-wide (or larger) connectors. Internal fan-out cables let you attach four disk drives to a single
4-wide connector.
Mini-SAS connectors support both internal and external SAS connections. The mini-SAS
connectors are smaller than the standard SAS internal and external connectors. Mini-SAS
connectors support single and multilinks with the ability to scale to future speed needs.
For examples of some internal SAS/mini-SAS cables and an external SAS/mini-SAS cables, see
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Introduction to SAS
●
92
How are Disk Drives Identified in SAS?
drives are identified in the following formats:
●
●
●
more information)
BoxX:SlotX = Enclosure X is attached to a disk drive in Slot X (see Backplane Connections
below for more information)
more information)
where X is the count number.
Note: Devices other than disk drives (CDROM, tape drives, etc...) are listed in order after your
system disk drives.
In parallel SCSI, XX is the disk drive’s channel number, YY is the target number, and ZZ is the
logical unit number (LUN).
What are the SAS Connection Options?
You can connect end devices to each other through direct cable connections and through
create large configurations.
Direct-attach Connections
In a direct-attach connection, SAS or SATA disk drives are connected directly to a SAS card
with SAS or mini-SAS cables. One disk drive is attached to one SAS/mini-SAS connector with
one SAS/mini-SAS cable (or multiple disk drives are attached to one SAS/mini-SAS connector
The number of direct-attached disk drives is limited to the number of phys supported by the
Backplane Connections
In a backplane connection, disk drives and SAS cards are attached to and communicate with
each other through a system backplane.
There are two types of backplane connections, passive and active. When connecting to either
backplane, it’s important to properly connect your disk drive LEDs in order to identify disk
LED connections and locations.
Once you have connected to a backplane, use Adaptec Storage Manager to manage your disk
drives. For more information, refer to the Adaptec Storage Manager User’s Guide on the Adaptec
Installation DVD.
.The number of end devices is limited to the number of slots available on the backplane. For
example, the Adaptec S50 enclosure, which contains an expander, is a backplane connection
that supports up to 12 SAS or SATA disk drives.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Introduction to SAS
●
93
Some backplanes support daisy-chain expansion to other backplanes. For example, you can
daisy-chain (connect one to the next) up to nine Adaptec S50 enclosures to a single SAS card in
a host system.
SAS Expander Connections
A SAS expander device literally expands the number of end devices that you can connect
large configurations of SAS end devices, including SAS cards and SAS and SATA disk drives.
With expander devices, you can build large and complex storage topologies.
There are two types of SAS expanders: fanout expanders and edge expanders. Each performs a
different role in a storage system. (For more information about how SAS expanders work, refer
to the STA Web site at www.scsita.org.)
You can connect up to 128 SAS ports to an edge expander. (A single edge expander can
therefore support up to 128 SAS addresses.)
You can connect up to 128 edge expanders to a fanout expander.
You can use only one fanout expander in any single SAS domain (a topology of SAS—and
possibly SATA—end devices and expander devices). A single SAS domain can therefore
comprise up to 16,384 SAS ports (and therefore up to 16,384 SAS addresses including the
fanout expander).
The next figure illustrates (in very basic terms) a SAS domain and shows how SAS cards, SAS
and SATA disk drives, and expander devices can fit together in a large data storage topology.
SAS Domain
SAS
SATA
Disk Drives
SAS
Disk Drives
SATA
SATA
Disk Drives
SATA
Disk Drives
SATA SAS
SAS Card
Fanout Expander
SAS Card
SAS Card
SATA
Disk Drives
SAS
SAS
SATA
SAS
SATA
Disk Drives
Disk Drives
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Introduction to SAS
●
94
How is SAS Different from Parallel SCSI?
In summary, although SAS and parallel SCSI both use the SCSI command set, how they move
data from one place to another is very different. To support point-to-point serial data
transport, SAS introduces new types of connectors, cables, connection options, and
terminology.
Generally speaking, SAS is faster and more flexible than parallel SCSI, and provides more
options for building your storage space. SAS lets you mix SAS and SATA disk drives together,
and lets you connect many, many more devices.
This table describes many of the main differences between the two interfaces.
Parallel SCSI
Serial Attached SCSI
Parallel interface
Serial interface
Maximum speed 320 MB/sec shared by all
devices on the bus
Maximum speed 300 MB/sec per phy when in half-
duplex mode
Supports SCSI devices only
Supports SATA and SAS disk drives simultaneously
Up to 16 devices per SCSI channel
More than 100 disk drives per SAS card, using an
Supports single-port devices only
Supports single- and dual-port devices
Uses SCSI IDs to differentiate between
devices connected to the same adapter
Uses unique SAS addresses to differentiate
between devices
User intervention required to set SCSI IDs
Requires bus termination
SAS addresses self-configured by SAS devices
Requires no bus termination
Standard SCSI connectors
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding RAID
B
In this appendix...
Non-redundant Arrays (RAID 0).......................................................................................... 96
RAID 1 Enhanced Arrays....................................................................................................... 97
When you create arrays (or logical drives), you can assign a RAID level to protect your data.
Each RAID level offers a unique combination of performance and redundancy. RAID levels
also vary by the number of disk drives they support.
This appendix describes the RAID levels supported by your Adaptec RAID controller, and
provides a basic overview of each to help you select the best level of protection for your data
storage.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B: Understanding RAID
●
96
Understanding Drive Segments
A drive segment is a disk drive or portion of a disk drive that is used to create an array. A disk
drive can include both RAID segments (segments that are part of an array) and available
segments. Each segment can be part of only one logical device at a time. If a disk drive is not
part of any logical device, the entire disk is an available segment.
Non-redundant Arrays (RAID 0)
An array with RAID 0 includes two or more disk drives and provides data striping, where data
is distributed evenly across the disk drives in equal-sized sections. However, RAID 0 arrays do
not maintain redundant data, so they offer no data protection.
Compared to an equal-sized group of independent disks, a RAID 0 array provides improved I/O
performance.
Drive segment size is limited to the size of the smallest disk drive in the array. For instance, an
array with two 250 GB disk drives and two 400 GB disk drives can create a RAID 0 drive
segment of 250 GB, for a total of 1000 GB for the volume, as shown in this figure.
Drive Segment Size
(Smallest Disk Drive)
Disk Drive 1
Disk Drive 2
250 GB
250 GB
1 5 ... 997
Disk Drive 1
Disk Drive 2
Disk Drive 3
2 6 ... 998
3 7 ... 999
Disk Drive 3
400 GB
Unused Space = 150 GB
Unused Space = 150 GB
4 8 ... 1000
Disk Drive 4
Disk Drive 4
400 GB
Disk Drives in Logical Drive
RAID 0 Logical Drive = 1000 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B: Understanding RAID
●
97
RAID 1 Arrays
A RAID 1 array is built from two disk drives, where one disk drive is a mirror of the other (the
same data is stored on each disk drive). Compared to independent disk drives, RAID 1 arrays
provide improved performance, with twice the read rate and an equal write rate of single disks.
However, capacity is only 50 percent of independent disk drives.
If the RAID 1 array is built from different- sized disk drives, the free space, drive segment size is
the size of the smaller disk drive, as shown in this figure.
Drive Segment Size
(Smallest Disk Drive)
Disk Drive 1
Disk Drive 2
250 GB
400 GB
Disk Drive 1
Disk Drive 2
1 – 250
1 – 250
Unused Space = 150 GB
RAID 1 Logical Drive = 250 GB
Disk Drives in Logical Drive
RAID 1 Enhanced Arrays
A RAID 1 Enhanced (RAID 1E) array—also known as a striped mirror—is similar to a RAID 1
array except that data is both mirrored and striped, and more disk drives can be included. A
RAID 1E array can be built from three or more disk drives.
In this example, the large bold numbers represent the striped data, and the smaller, non-bold
numbers represent the mirrored data stripes.
Disk Drive 1
400 GB
Disk Drive 1
Disk Drive 2
Disk Drive 3
1
2
3
3
1
2
4
5
6
6
4
5
Disk Drive 2
Disk Drive 3
400 GB
400 GB
Disk Drives in Logical Drive
RAID 1E Logical Drive = 600 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B: Understanding RAID
●
98
RAID 10 Arrays
A RAID 10 array is built from two or more equal-sized RAID 1 arrays. Data in a RAID 10 array
is both striped and mirrored. Mirroring provides data protection, and striping improves
performance.
Drive segment size is limited to the size of the smallest disk drive in the array. For instance, an
array with two 250 GB disk drives and two 400 GB disk drives can create two mirrored drive
segments of 250 GB, for a total of 500 GB for the array, as shown in this figure.
Drive Segment Size
(Smallest Disk Drive)
Disk Drive 1
Disk Drive 2
250 GB
250 GB
1 3 ... 499
2 4 ... 500
1 3 ... 499
Disk Drive 1
Disk Drive 2
Disk Drive 3
Disk Drive 3
400 GB
Unused Space = 150 GB
Unused Space = 150 GB
2 4 ... 500
Disk Drive 4
Disk Drive 4
400 GB
Disk Drives in Logical Drive
RAID 10 Logical Drive = 500 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B: Understanding RAID
●
99
RAID 5 Arrays
A RAID 5 array is built from a minimum of three disk drives, and uses data striping and parity
data to provide redundancy. Parity data provides data protection, and striping improves
performance.
Parity data is an error-correcting redundancy that’s used to re-create data if a disk drive fails.
In RAID 5 arrays, parity data (represented by Ps in the next figure) is striped evenly across the
disk drives with the stored data.
Drive segment size is limited to the size of the smallest disk drive in the array. For instance, an
array with two 250 GB disk drives and two 400 GB disk drives can contain 750 GB of stored
data and 250 GB of parity data, as shown in this figure.
Drive Segment Size
(Smallest Disk Drive)
Disk Drive 1
Disk Drive 2
250 GB
250 GB
1 4 ...
P
Disk Drive 1
Disk Drive 2
Disk Drive 3
2 5 ... 748
3 P ... 749
Disk Drive 3
400 GB
Unused Space = 150 GB
Unused Space = 150 GB
P 6 ... 750
Disk Drive 4
Disk Drive 4
400 GB
Disk Drives in Logical Drive
RAID 5 Logical Drive = 750 GB plus Parity
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B: Understanding RAID
●
100
RAID 5EE Arrays
A RAID 5EE array—also known as a hot space—is similar to a RAID 5 array except that it
includes a distributed spare drive and must be built from a minimum of four disk drives.
Unlike a hot spare, a distributed spare is striped evenly across the disk drives with the stored
data and parity data, and can’t be shared with other logical disk drives. A distributed spare
improves the speed at which the array is rebuilt following a disk drive failure.
A RAID 5EE array protects your data and increases read and write speeds. However, capacity is
reduced by two disk drives’ worth of space, which is for parity data and spare data.
In this figure, S represents the distributed spare, P represents the distributed parity data.
Drive Segment Size
(Smallest Disk Drive)
Disk Drive 1
Disk Drive 2
250 GB
250 GB
1 S ...
P
Disk Drive 1
Disk Drive 2
Disk Drive 3
2 P ... 449
Disk Drive 3
400 GB
S 3 ...
S
Unused Space = 150 GB
Unused Space = 150 GB
P 4 ... 500
Disk Drive 4
Disk Drive 4
400 GB
Disk Drives in Logical Drive
Based on the drive segment sizes used:
RAID 5EE Logical Drive = 500 GB plus parity
and hot spare.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B: Understanding RAID
●
101
RAID 50 Arrays
A RAID 50 array is built from six to forty-eight disk drives configured as two or more RAID 5
arrays, and stripes stored data and parity data across all disk drives in both RAID 5 arrays. (For
The parity data provides data protection, and striping improves performance. RAID 50 arrays
also provide high data transfer speeds.
Drive segment size is limited to the size of the smallest disk drive in the array. For example,
three 250 GB disk drives and three 400 GB disk drives comprise two equal-sized RAID 5 arrays
with 500 GB of stored data and 250 GB of parity data. The RAID 50 array can therefore contain
1000 GB (2 x 500 GB) of stored data and 500 GB of parity data.
In this figure, P represents the distributed parity data.
RAID 50
Logical Drive
=
1000 GB
plus Parity
Each RAID 5 Logical Drive has
500 GB Data Storage
250 GB Parity Data
RAID 5
A
RAID 5
B
1, 5, P
3, P, 9
P, 7, 11
2, 6, P
4, P, 10
P, 8, 12
Total Unused
Space = 150 GB
Drive 1
250 GB
Drive 2
250 GB
Drive 3
250 GB
Drive 4
400 GB
Drive 5
400 GB
Drive 6
400 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B: Understanding RAID
●
102
RAID 6 Arrays
A RAID 6 array—also known as dual drive failure protection—is similar to a RAID 5 array
because it uses data striping and parity data to provide redundancy. However, RAID 6 arrays
include two independent sets of parity data instead of one. Both sets of parity data are striped
separately across all disk drives in the array.
RAID 6 arrays provide extra protection for your data because they can recover from two
simultaneous disk drive failures. However, the extra parity calculation slows performance
(compared to RAID 5 arrays).
RAID 6 arrays must be built from at least four disk drives. Maximum stripe size depends on
the number of disk drives in the array.
Drive Segment Size
(Smallest Disk Drive)
Disk Drive 1
Disk Drive 2
250 GB
250 GB
1 P1 ... P2
2 P2 ... 449
P1 3 ... P1
Disk Drive 1
Disk Drive 2
Disk Drive 3
Disk Drive 3
400 GB
Unused Space = 150 GB
Unused Space = 150 GB
P2 4 ... 500
Disk Drive 4
Disk Drive 4
400 GB
Disk Drives in Logical Drive
Based on the drive segment sizes used:
RAID 6 Logical Drive = 500 GB plus
parity (P1 & P2)
RAID 60 Arrays
protection—is built from eight disk drives configured as two or more RAID 6 arrays, and
stripes stored data and two sets of parity data across all disk drives in both RAID 6 arrays.
Two sets of parity data provide enhanced data protection, and striping improves performance.
RAID 60 arrays also provide high data transfer speeds.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B: Understanding RAID
●
103
Selecting the Best RAID Level
Use this table to select the RAID levels that are most appropriate for the logical drives on your
storage space, based on the number of available disk drives and your requirements for
performance and reliability.
Minimum
Disk Drive
Usage
Read
Write
Built-in
Disk
RAID Level
Redundancy
Performance Performance Hot Spare
Drives
RAID 0
No
100%
50%
No
No
No
No
No
Yes
No
No
No
2
2
3
4
3
4
6
4
8
ŠŠŠ
ŠŠ
ŠŠŠ
ŠŠ
ŠŠ
ŠŠ
Š
RAID 1
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
RAID 1E
RAID 10
RAID 5
50%
ŠŠ
50%
ŠŠ
67 – 94%
50 – 88%
67 – 94%
50 – 88%
50 – 88%
ŠŠŠ
ŠŠŠ
ŠŠŠ
ŠŠ
RAID 5EE
RAID 50
RAID 6
Š
Š
Š
ŠŠ
Š
RAID 60
Disk drive usage, read performance, and write performance depend on the number of drives in
the logical drive. In general, the more drives, the better the performance.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Adaptec RAID
Configuration Utility
C
In this appendix...
Formatting and Verifying Disk Drives ................................................................................ 113
Locating Disk Drives............................................................................................................ 113
The Adaptec RAID Configuration (ARC) utility is a BIOS-based utility that you can use to
create arrays and manage controllers, disk drives and other devices.
Note: We recommend that only advanced users familiar with working in a computer BIOS use
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C: Using the Adaptec RAID Configuration Utility
●
105
Introduction to the ARC Utility
The ARC utility comprises these tools:
●
The Array Configuration Utility (ACU)—For creating and managing arrays, and
●
●
Running the ARC Utility
If your Adaptec controller is connected to a RAID enclosure, power on your enclosure (or
enclosures) before you power on your computer.
Start or restart your computer. When prompted, press Ctrl+A.
During boot up, if your system has insufficient memory this message displays:
“Adaptec RAID Configuration Utility will load after, system initialization. Please wait... Or
press <Enter> Key to attempt loading the utility forcibly [Generally, not recommended]”
Note: The first time you power on your computer after you install a new controller, the BIOS
may display a configuration that doesn’t match your system’s configuration. This is normal.
Navigating the ARC Utility
All the tools within the ARC utility are menu-based and instructions for completing tasks
appear on-screen. Menus can be navigated using the arrows, Enter, Esc, and other keys on your
keyboard.
Using the ACU to Create and Manage Arrays
select your controller, then press Enter. Select Array Configuration Utility, then press Enter.
Follow the on-screen instructions to create and manage arrays, and initialize, rescan, and erase
disk drives.
Creating a New Array
To begin creating an array, select Create Arrays from the main ACU menu.
Only disk drives that can be used in a new array are available for selection. (Disk drives must be
information.)
Use the Array Properties menu to modify the array’s RAID level, size, name, stripe size, cache
settings, and maxCache settings.
Note: For more information about RAID levels and using disk drives to create arrays, see
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C: Using the Adaptec RAID Configuration Utility
●
106
Managing Existing Arrays
To view or modify existing arrays, select Manage Arrays from the main ACU menu.
From the Manage Arrays menu, you can:
●
View the properties of an array.
Note: Failed drives are displayed in a different text color.
●
●
●
●
●
Assign or remove hot spares.
Modify power management settings.
Change the cache settings for an array.
Delete an array.
Caution: Before deleting an array, back up the data to avoid permanently losing it.
!
Creating Bootable Arrays
Note: You may need to change the system BIOS to modify the boot order. For more
information, refer to your computer documentation.
The controller always uses the lowest numbered array as its bootable array.
To make an array bootable:
1
2
Select Manage Arrays from the main ACU menu.
Select the array that you want to make bootable, then press Ctrl+B.
Note: You cannot make an array bootable while it’s building, verifying, or rebuilding.
The array’s number changes to Array 00, which makes this array the controller’s boot array.
Restart your computer.
3
Modifying Power Management Settings
Power management settings switch the array to low power state when it is inactive for a specific
time.
To modify power management settings:
1
2
Select Manage Arrays from the main ACU menu.
Select the array, then press Ctrl+W.
In the power management console, enter these details:
Option
Power Management
Description
When enabled, switches the array to low power state, when the array/
drive is inactive.
Slow Down Drive After
The duration of inactive state of the array/drive after which it is slowed
down to low power mode. This is an optional setting.
Note: The disk drive should support low power mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C: Using the Adaptec RAID Configuration Utility
Description
●
107
Option
Power Off Drive After
The duration of inactive state of the array/drive after which it is powered
off. This is an optional setting.
Note: Power Off Drive After duration should be greater than Slow
Down Drive After Duration.
Verify Drive After
The regular time interval at which the system performs a health check of
the array/drive.
Modifying Cache Settings
You can modify the read and write cache settings for an array. You can also modify the
maxCache settings. Adaptec maxCache uses the compatible Solid State Drives (SSDs) in your
system as a fast read cache pool to improve performance in read-intensive applications.
Note: maxCache Read Caching is supported on Adaptec Series Q controllers only. For more
To modify the cache settings for an array:
1
2
Select Manage Arrays from the main ACU menu.
Select the array, then press Ctrl+C.
The Modify Cache Settings window opens.
Enable or disable read caching.
Press Tab.
3
4
5
Enable or disable write caching:
●
Select Enable always for “write-back” caching
●
Select Enable with ZMM if your controller has battery backup or a zero-maintenance
cache protection module
●
Select Disable for “write-through” caching
6
7
8
9
Press Tab.
Select the maxCache Read Cache setting (Enable/Disable).
Press Tab.
Press Enter to accept the values.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C: Using the Adaptec RAID Configuration Utility
●
108
Initializing Disk Drives
If a disk drive appears grayed-out (unavailable for use in a new array), it may need to be
initialized.
To begin initializing a disk drive, select Initialize Drives from the main ACU menu. You can
initialize one drive or multiple drives. If an error occurs during initialization, the message
“Initializing drives...FAILED x of n” is displayed. Press Enter to see a list of drives that failed to
initialize. Press Esc to continue.
Caution: Do not initialize a disk drive that is part of an array. Initializing a disk drive that’s
part of an array may make the array unusable.
!
Back up all data from your disk drive before you initialize it.
Rescanning Disk Drives
To begin rescanning a disk drive, select Rescan Drives from the main ACU menu.
Secure Erasing Disk Drives
When you perform a secure erase on a disk drive, all data on that disk drive is completely and
irretrievably eradicated. Secure erase performs three distinct writing passes to the disk drive
being erased—it does not just write zeros.
Performing a secure erase takes up to six times longer than clearing (or zeroing) a disk drive.
You may want to perform a secure erase only on disk drives that contain confidential or
classified information.
Note: To erase (or zero) a disk drive with non-classified information, you may choose to format
less time than the secure erase option.
To begin a secure erase, select Secure Erase from the main ACU menu, then select Y (yes). To
return to the main ACU menu once the secure erase has begun, press Esc.
The selected disk drive(s) cannot be used until the erase is complete.
Stopping a Secure Erase
To stop a secure erase in progress:
1
2
In the main ACU window, select Secure Erase.
Select the disk drive being secure erased, then press Ctrl+Q.
The secure erase stops and the ACU returns to its main window.
Managing Global Hot Spares
A hot spare is a disk drive that automatically replaces any failed drive in a logical drive. A global
hot spare is not assigned to a specific logical drive. It protects any logical drive on the controller
(except RAID 0 logical drives). You can create and delete global hot spares even if no arrays
exist.
To create and delete global hot spares:
1
Select Global Hotspares from the main ACU menu.
The Global Hotspare Management window opens.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C: Using the Adaptec RAID Configuration Utility
●
109
2
3
4
Using the arrow keys, select a drive from the list. Existing hot spares are highlighted.
Press Ins to create a new global hot spare. Press Del to delete a hot spare.
Press Enter to save your changes and return to the main menu.
Using the ACU to Create and Manage JBODs
controller, then press Enter. Select Array Configuration Utility, then press Enter.
Follow the on-screen instructions to create and manage JBODs.
Creating a New JBOD
A JBOD disk appears as a physical disk drive to the operating system. A JBOD disk is not
redundant and not bootable.
To begin creating a JBOD, select Create JBOD from the main ACU menu. All the supported
disk drives are displayed. Select a disk drive and Enter.
Managing Existing JBODs
To delete a JBOD or morph a JBOD into a simple volume, select Manage JBODs from the
main ACU menu.
From the Manage JBODs menu, you can:
●
Morph a JBOD into a simple volume.
Delete a JBOD
●
Note: When you delete a JBOD, you lose all data on that disk.
Converting a JBOD Into a Simple Volume
You can convert any JBOD into a simple volume.
1
2
Select Manage JBODs from the main ACU menu.
Select the JBOD that you want to morph into a simple volume and press Ctrl+V.
Using the ACU to Manage the maxCache Pool
Adaptec maxCache uses the compatible Solid State Drives (SSDs) in your system as fast cache
memory for read-intensive operations. Before you can enable maxCache read caching on a
Note: You can configure the maxCache pool only if you have one or more compatible Solid
State Drives installed on the RAID controllers in your system. For a list of maxCache-compatible
SSDs, refer to the Adaptec Web site at www.adaptec.com/compatibility.
To add a SSD to the maxCache pool or to remove a SSD from the pool:
1
controller, then press Enter. Select Array Configuration Utility, then press Enter.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C: Using the Adaptec RAID Configuration Utility
●
110
2
Select Manage MaxCache Pool from the ACU main menu.
All supported SSDs are displayed.
about initializing drives.
3
4
5
Using the arrow keys, select a SSD from the list.
Press Ins to add the SSD to the maxCache pool.
To remove a SSD from the pool, press the right arrow to switch windows, use the arrow
keys to select a SSD, then press Del.
6
Press Enter to save your changes and return to the main menu.
Using SerialSelect to Modify Controller Settings
The SerialSelect utility is a tool for modifying the settings of your controller and the disk drives
connected to it.
Opening SerialSelect
Follow the on-screen instructions to modify the settings of your controller and connected disk
drives as required.
Applying Changes and Exiting
1
To exit SerialSelect, press Esc until you are prompted to exit.
If you modified any settings, you are prompted to save the changes before you exit.
Select Yes to exit, then press any key to restart your computer.
Any changes you made take effect after the computer restarts.
2
Modifying Your Controller’s Configuration
Note: Default controller settings are suitable for most computers. We recommend that you do
not change the default setting.
To modify your controller’s basic settings, select Controller Configuration from the main
SerialSelect menu.
To modify your controller’s power management settings, select Advanced Configuration.
To modify your controller’s PHY settings, select PHY Configuration.
Some options may not be available for your controller.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C: Using the Adaptec RAID Configuration Utility
●
111
General Controller Settings
Note: Default settings are shown in bold type.
Option
Description
Drive’s Write Cache
When set to Enable All, write cache is enabled on all disk drives on the
controller. (Enabling the write cache overrides any individual drive
settings in Adaptec Storage Manager.) When set to Disable All, write
cache is not used on the disk drives. When set to Drive Specific, write
cache is enabled/disabled on a per-drive basis in Adaptec Storage
Manager.
Caution—When write cache is enabled, there is a slight possibility of
data loss or corruption during a power failure.
Runtime BIOS
When enabled, the controller BIOS allows the controller to act as a
bootable device. Disabling the BIOS allows another controller to act as a
bootable device.
Automatic Failover
When enabled, the controller automatically rebuilds an array when a
failed disk drive is replaced. When disabled, the array must be rebuilt
manually.
Array Background
Consistency Check
When enabled, the controller constantly verifies a redundant array. Note
that there may be a significant performance reduction. Default is
disabled.
Array-based BBS
Support
When enabled in systems that support BBS, the controller presents
attached bootable devices up to the BIOS for boot device selection. This
is relevant for logical arrays. Default is disabled.
SATA Native Command When enabled, NCQ is enabled. Disable this feature if you want to
Queuing (NCQ)
attach more than 48 SATA II disk drives. Only available with SATA II disk
drives.
Physical Drives Display When enabled, connected disk drives are displayed during system Power
During POST
On Self Test (POST). Displaying the disk drives adds a few seconds to
the overall POST time. Default is disabled.
DVD/CD-ROM Boot
Support
When enabled, the system can be booted from a bootable DVD/CD.
(This setting is not available on all RAID controller models.)
Removable Media
Devices Boot Support
When enabled, removable media devices, such as CD drives, are
supported. (This setting is not available on all RAID controller models.)
Alarm Control
When enabled, the alarm sounds. Default is enabled.
Note—When the alarm is turned off (disabled), it will remain off after a
reboot.
Default Background
Task Priority
Sets the default priority for background tasks on the controller (such as
logical drive creation) to High, Medium, or Low. Default is Medium.
Note—This setting applies to new tasks. It does not affect currently
running tasks.
LED Indication Mode
When set to Activity and Fault, the drive activity LEDs blink to indicate
I/O activity (randomly depending on I/O load) and fault (steady 1Hz).
When set to Fault Only, the drive activity LEDs blink to indicate fault
state only. For Series 2 and Series 5 controllers, default is Activity and
Fault. For Series 6/6E controllers, default is Fault Only.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C: Using the Adaptec RAID Configuration Utility
●
112
Option
Description
Backplane Mode
● Series 2, Series 5, Series 6 Controllers:
When set to Auto, controller automatically detects backplane signal
type: I2C or SGPIO. To set the backplane mode explicitly select SGPIO,
I2C, or Disabled. Default is Auto.
● Series 6E/6T Controllers:
When set to Default, controller automatically sets the backplane mode
to IBPI. To set the backplane mode explicitly, select IBPI, SGPIO, or
Disabled. Default is IBPI.
Note—With the default IBPI setting, the firmware sends a SGPIO
“Backplane_TYPE" signal if it recognizes that a SGPIO Backplane is
connected. If any connected SGPIO backplane does not support the
“Backplane_TYPE" signal, or it does not support the IBPI protocol, you
can manually set the Backplane Mode to "SGPIO".
Selectable Performance When set to Dynamic, performance criteria adjusts automatically based
Mode
on controller usage, RAID level, and disk drive type. When set to OLTP/
Db, performance criteria is optimized for transaction-oriented
applications, such as data entry and retrieval. When set to Big Block
Bypass, DRAM write cache is bypassed based on IO write size;
performance criteria is optimized for serving Web pages, file serving,
and data retrieval. Default is Dynamic.
Power Management Settings
Note: When power management is disabled, no related options will be displayed.
Note: Make sure the operating system driver supports power management.
Note: Default settings are shown in bold type.
Option
Description
Power Management
Settings
When enabled, switches the system to low power state, based on the
specified settings.
Time Zone
The time zone of the place in which the system is located. Time specific
power management settings are implemented based on the set time
zone. By default, it is set to 00:00.
The valid range for the time zone settings is -12:00 to +12:00.
Stay Awake Start
Stay Awake End
The time from which the system should operate in the full power mode,
irrespective of other power management settings, daily. By default it is
set to 00:00.
The valid range is 00:00 to 23:59.
The time until which the system should operate in the full power mode,
irrespective of other power management settings, daily. By default it is
set to 00:00.
The valid range is 00:00 to 23:59.
Spin Up Limit (Internal) The number of internal drives to be spun up at any given moment. By
default it is set to 0. In the default setting, all the internal drives will
spin up.
Spin Up Limit (External) The number of external drives to be spun up at any given moment. By
default it is set to 0. In the default setting, all the external drives will
spin up.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C: Using the Adaptec RAID Configuration Utility
●
113
PHY Settings
Option
Description
PHY Rate
The data transfer rate between the controller and devices. The default setting is
Auto, which allows the SAS card to adjust the data transfer rate, as needed. For
low-port 5-series RAID controllers (5085, 5405), you can set the PHY rate to
1.5Gb/second or 3.0Gb/second (the maximum rate).
CRC Checking When enabled, determines whether the controller verifies the accuracy of data
transfer on the serial bus. Default setting is Yes (enabled). Set to No (disabled)
only if the controller is connected to a device that does not support CRC Checking.
SAS Address In a situation where you want each phy on a controller to be in a different SAS
domain, this setting specifies a unique world-wide name for each phy. Default
is 0.
Note: This setting is for SAS address conflict resolution only and should otherwise
remain at its default value.
Formatting and Verifying Disk Drives
You can use the disk utilities to low-level format or verify your disk drives. (New disk drives
are low-level formatted at the factory and do not need to be low-level formatted again.)
Caution: Before you format a disk drive, back up all data. Formatting destroys all data on
a disk drive.
!
To format or verify a disk drive:
1
2
3
4
5
Select the controller you want, then press Enter.
Select Disk Utilities.
Select the disk drive you want, then press Enter.
Select Format Disk or Verify Disk Media.
Locating Disk Drives
Note: This feature is only available with disk drives that have an activity LED.
You can use the Identify Drive feature to physically locate a disk drive by blinking the LED.
To locate a disk drive:
1
2
3
4
5
6
Select the controller you want, then press Enter.
Select Disk Utilities.
Select the disk drive you want, then press Enter.
Select Identify Drive, then press Enter.
When you have finished locating your disk drive, press any key to stop the blinking.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C: Using the Adaptec RAID Configuration Utility
●
114
Identifying Disk Drives
You can identify disk drives by viewing the list of disk drives on your system. Only physical
drives that display during POST are shown.
To identify a disk drive:
1
2
3
Select the controller you want, then press Enter.
Select Disk Utilities.
The Disk Utilities view will provide you with the following information:
Location
Model
Rev#
Speed
Size
CN1=DEV1
Box0=Slot0
Exp0=phy0
The manufacturer The revision
The speed of the The size of the
disk drive. disk drive.
information.
number of the
disk drive.
The location information of a disk drive is determined by three types of connections:
●
●
●
Direct attached drives—The connection is determined by the cable connected to a device,
for example CN1 (connector 1) is connected to DEV1 (device 1). For more information, see
Storage Enclosure Processor (SEP) managed devices—The connection is determined by an
active backplane. Box0 (enclosure 0) is connected to slot0 (disk drive slot 0 in the
Expanders—The connections is determined by an expander. Exp0 (expander 0) is
connected to phy0 (phy 0 within a connector). For more information, see SAS Expander
Note: Devices other than disk drives (CDROM, tape drives, etc...) are listed in order after your
system disk drives.
Viewing the Event Log
The BIOS-based event log records all firmware events, such as configuration changes, array
creation, and boot activity.
Some events are not stored indefinitely—the event log is cleared of any non-persistent events
each time you restart your computer; additionally, once the log is full, new events overwrite
old events.
To view the event log:
1
2
3
4
Select the controller you want, then press Enter.
When the ARC utility menu appears, then press Ctrl+P.
Select Controller Log Information, then press Enter.
The current event log opens.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Adaptec Flash Utility
D
In this appendix...
Before You Begin .................................................................................................................. 116
This chapter describes how to use the Adaptec Flash Utility (AFU), a text-based DOS utility
that you can use to update, save, or verify the RAID controller’s firmware BIOS and NVRAM.
Caution: Although the AFU contains safeguards to prevent you from accidentally damaging
your RAID controller’s flash contents, it is still important to use the AFU carefully and
!
correctly to avoid rendering your RAID controller inoperable. We recommend that only
advanced users familiar with working in DOS use the AFU. For more information, see
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D: Using the Adaptec Flash Utility
●
116
System Requirements
●
DOS version 5.0 or later.
Note: You can’t run the AFU from a DOS command prompt window under any version of
Windows.
●
At least 8 MB of extended memory.
Compatibility Notes
●
Supports HIMEM.SYS; compatible with other DOS drivers running under HIMEM.SYS
(for example, SMARTDRV.SYS and SETVER.SYS).
●
Does not support DOS extenders installed in memory, such as EMM386.SYS and
DOS4GW.
Before You Begin
1
Obtain the firmware (see the following section).
2
There are two ways to run the AFU:
1
2
Obtaining the Firmware
To obtain RAID controller firmware, go to:
●
Adaptec Installation DVD—Includes the AFU executable (AFU.exe) and a separate flash
image. The flash image may comprise multiple User Flash Image (UFI) files.
●
Adaptec Web site—Download a new firmware file to get the most recent version of
firmware/BIOS and AFU.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D: Using the Adaptec Flash Utility
●
117
Creating the Firmware Update Disks
To create the firmware update disks:
1
Copy these files to empty, formatted floppy disks, a USB flash drive, or a writable CD:
●
AFU.exe
●
Axxxx01.ufi
where xxx is the model number of your controller.
Note: Most controller model numbers have a suffix (for example Adaptec RAID 3405).
Check that the .ufi file is the correct file for your controller before copying.
2
3
If using floppy disks, copy each additional Axxxx0x.ufi file to a separate floppy disk. (Some
RAID controllers have four UFI files; some have more. Each goes onto its own floppy
disk.)
To use a menu-based AFU, see the following section.
Running the Menu-based AFU
To run the menu-based AFU:
1
Shut down your operating system and reboot to DOS from a bootable DOS floppy disk or
from a DOS partition on a bootable drive. (You can use a disk drive connected to the
controller you are updating.) If your computer isn’t set up to boot from the bootable
floppy disk, enter the system setup utility and change the setting.
2
3
Insert the firmware update disk (created using the steps above) containing AFU.exe
At the DOS command prompt, type AFUwith no arguments.
The AFU’s main menu is displayed.
4
Select Select Controllers, then select the Adaptec RAID controller(s) to be flashed.
To update multiple RAID controllers in the same system, update the boot controller’s flash
first, restart the computer, then update the flash for the remaining controllers.
5
6
Select Select an Operation.
Choose the operation you want, then follow the on-screen instructions to complete the
task:
●
Update flash image—Updates all the flash components on a RAID controller with the
flash image data from the UFI file.
●
Save flash image—Reads the contents of a RAID controller’s flash components and
saves the data to a UFI file, which you can use to restore a RAID controller’s flash if
required.
●
●
Verify flash image—Reads the contents of a RAID controller’s flash components and
compares it to the contents of the specified UFI file.
Display flash information—Displays version information about a RAID controller’s
flash components.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D: Using the Adaptec Flash Utility
●
118
7
Complete the flash operation and restart your computer before trying to use the RAID
controller again. (You can not use your RAID controller while you are updating its flash.)
The AFU processes the selected command, prompts you to insert additional floppy disks
as needed, and reports either success or an error message code.
Running the AFU from the Command Line
To run the AFU from the command line:
1
Shut down your operating system and reboot to DOS from a bootable DOS floppy disk or
from a DOS partition on a bootable drive. (You can use a disk connected to the controller
you’re updating.) If your computer isn’t set up to boot from the bootable floppy disk, enter
the system setup utility to change the setting.
2
3
Insert the firmware update disk containing AFU.exe
you want.
Note: To find a controller number, type AFU LIST, then press Enter.
The AFU processes the command, prompts you to insert additional floppy disks as needed,
exits, and reports either success or an error message code.
AFU Commands
This section lists the available AFU commands.
List
Displays the AFU-supported RAID controllers installed on your computer. Also displays the
ID numbers assigned to each controller.
You don’t have to restart the computer after completing this command.
This example shows a typical system response to a LIST command:
A:\> AFU LIST
Adaptec Flash Utility V4.0-0 B5749
(c)Adaptec Inc. 1999–2005. All Rights Reserved.
Controllers Detected and Recognized:
Controller #0 (03:05:00) Adaptec RAID 51645
Save
Saves the contents of a RAID controller’s flash in a UFI file. The name of the UFI file is based
on the controller type and can’t be changed.
You must restart the computer following a SAVE command.
The command syntax for the SAVE command is
AFU SAVE [/C<Controller ID>] [/D <UFI File Path>]
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D: Using the Adaptec Flash Utility
●
119
These switches are available:
●
/C <Controller ID>—One or more RAID controller IDs representing the set of RAID
controllers on which to perform the specified command. The default is 0; if the computer
has multiple RAID controllers, the AFU defaults to controller 0 unless you specify
otherwise.
For example:
To specify a single RAID controller ID: /C 0
To specify multiple IDs separated by commas: /C 0,2
To indicate all RAID controllers: ALL
If you are using multiple RAID controllers, you must specify the controller you want by
using the /C switch; otherwise, the AFU displays an error message and exits.
●
/D <UFI File Path>—Specifies the path where the UFI files are located. If you do not
specify the /D switch, the AFU looks for (or creates) its UFI files in the default location.
You cannot specify the name of a UFI file, only its path. UFI filenames are predefined,
based on the RAID controller type.
In this example, the AFU saves flash contents from RAID controller 0 to a UFI file in the
current default drive and directory:
A:\> AFU SAVE /C 0
In this example, the AFU saves flash contents from Controller 1 to a UFI file in
C:\UFI_FILES:
A:\> AFU SAVE /C 1 /D C:\UFI_FILES
Update
Updates the flash components of one or more RAID controllers on your computer from the
flash image data in a UFI file. You must restart the computer following an UPDATE command.
The command syntax for the UPDATE command is:
AFU UPDATE [/C<Controller ID>] [/D <UFI File Path>]
This example shows a typical system response after an update.
A:\> AFU UPDATE /C 0
Adaptec Flash Utility V4.0-0 B5749
(c)Adaptec Inc. 1999–2005. All Rights Reserved.
Updating Controller 0 (Adaptec RAID 31205)
Reading flash image file (Build 5749)
AFU is about to update firmware on controllers Adaptec RAID 51645
***PLEASE DO NOT REBOOT THE SYSTEM DURING THE UPDATE***
This might take a few minutes.
Writing Adaptec RAID 51645 (4MB) Flash Image to controller 0...OK.
Verifying...OK
Please restart the computer to allow firmware changes to take effect.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D: Using the Adaptec Flash Utility
●
120
Verify
Compares the contents of each of the flash components on a RAID controller to the
corresponding image in a UFI file, and indicates whether they match. After using the VERIFY
command, you must restart the computer.
The command syntax for the VERIFY command is as follows:
AFU VERIFY [/C<Controller ID>] [/D <UFI File Path>]
This example shows a typical system response after a VERIFY command.
A:\> AFU VERIFY /C 0
Adaptec Flash Utility V4.0-0 B5749
(c)Adaptec Inc. 1999–2005. All Rights Reserved.
Reading flash image file (Build 5748)
Controller #0: Adaptec RAID 51645
ROM: Checksum: 797B [VALID] (Build 5748)
File: Checksum: 797B [VALID] (Build 5748)
Image Compares Correctly
Version
Displays version information about the flash components on a RAID controller. After using
the VERSION command, restart your computer.
The command syntax for the VERSION command is:
AFU VERSION [/C<Controller ID>]
This example displays version information about all supported RAID controllers.
A:\> AFU VERSION /C 0
Adaptec Flash Utility V4.0-0 B5749
(c)Adaptec Inc. 1999–2005. All Rights Reserved.
Version Information for Controller #0 (Adaptec RAID 51645)
ROM: Build 5748 [VALID] Fri Sep 27 13:28:40 EDT 2005
A:\> AFU VERSION /C ALL
Help
Displays a summary of AFU functions and command switches. For example:
A:\> AFU HELP
A:\> AFU /?
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D: Using the Adaptec Flash Utility
●
121
Updating the Flash Using the AFU Command Line
1
2
Shut down your operating system and reboot to DOS from a bootable DOS floppy disk or
from a DOS partition on a bootable drive. (You can use a disk connected to the controller
you’re updating.) If your computer isn’t set up to boot from the bootable floppy disk or a
bootable device other than a disk drive, enter the system setup utility to change the setting.
3
4
Insert the firmware update disk containing AFU.exe
At the DOS command, if you have multiple controllers and you don’t know the number of
the controller you want to update, type AFU LIST, then press Enter. Otherwise, skip to the
next step.
5
6
you want.
Update the flash using the instructions suitable for your requirements:
●
To update a single RAID controller:
AFU UPDATE /C <cont_number>
Where <cont_number> is the number of the RAID controller whose firmware you
are updating. For example, to upgrade Controller 0, type AFU UPDATE /C 0
●
To update multiple RAID controllers:
AFU UPDATE /C <cont_number_a>,<cont_number_b>
Where <controller_number_a> and <controller_number_b> are the
numbers of the Adaptec RAID controllers whose firmware you are updating. For
example, to upgrade controllers 0, 2, and 3, type AFU UPDATE /C 0, 2, 3
●
To update all RAID controllers simultaneously:
AFU UPDATE /C all
Note: The UFI file identifies the RAID controllers, so you don’t have to worry about
flashing the wrong controller.
7
When prompted, insert the first firmware disk into your floppy disk drive.
The AFU reads the first disk.
8
9
When prompted, remove the first firmware disk and insert the second firmware disk into
your floppy disk drive.
Download from Www.Somanuals.com. All Manuals Search And Download.
Controller LED and I2C Connector
Quick Reference
E
In this appendix...
Adaptec RAID 5085 LED Connector Specification............................................................ 123
Adaptec RAID 2045 LED Connector Specification............................................................ 137
Adaptec RAID 6805T/6805TQ LED Connector Specification........................................... 145
This chapter provides a reference guide for Adaptec RAID controllers of Activity LED and I2C
connectors.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
123
Adaptec RAID 5085 LED Connector Specification
2249100-R
ASR-5085/512MB RoHS SGL
●
Adaptec RAID 5085 Activity LED Header Connector: Molex 10-89-7162 or equivalent
Activity LED Header Mating Cable Connector: Molex 22-55-2161 or equivalent
●
J2:
22-55-2161
J2 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
Pin Number
1
+3.3V
2
2
ACTIVITY CN0, LANE 0
+3.3V
1
3
4
4
ACTIVITY CN0, LANE 1
+3.3V
3
5
6
6
ACTIVITY CN0, LANE 2
+3.3V
5
7
8
8
ACTIVITY CN0, LANE 3
+3.3V
7
9
10
9
10
11
12
13
14
15
16
ACTIVITY CN1, LANE 0
+3.3V
12
11
14
13
16
15
ACTIVITY CN1, LANE 1
+3.3V
ACTIVITY CN1, LANE 2
+3.3V
ACTIVITY CN1, LANE 3
●
Adaptec RAID 5085 Aggregate Activity LED Board Connector: Molex 22-28-4023 or
equivalent
●
Aggregate LED Mating Cable Connector: Molex 50-57-9002 or equivalent
J1:
J1 Pin Number Signal
Description
LED Cathode
LED Anode
2
1
ACTIVITY
+3.3V
●
Adaptec RAID 5085 External Alarm Connector: Molex 22-28-4023 or equivalent
Alarm Mating Cable Connector: Molex 50-57-9002 or equivalent
●
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
124
J12:
J12 Pin Number Signal
Description
2
1
~2kHz Square Wave
+3.3V
Open collector transistor
●
Adaptec RAID 5085 Status LED Board Connector: Molex 10-89-7162 or equivalent
Status LED Mating Cable Connector: Molex 22-55-2161 or equivalent
●
J14:
22-55-2161
J14 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
Pin Number
1
+3.3V
2
2
STATUS CN0, LANE 0
+3.3V
1
3
4
4
STATUS CN0, LANE 1
+3.3V
3
5
6
6
STATUS CN0, LANE 2
+3.3V
5
7
8
8
STATUS CN0, LANE 3
+3.3V
7
9
10
9
10
11
12
13
14
15
16
STATUS CN1, LANE 0
+3.3V
12
11
14
13
16
15
STATUS CN1, LANE 1
+3.3V
STATUS CN1, LANE 2
+3.3V
STATUS CN1, LANE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
125
Adaptec RAID 5405/5405Z LED and I2C Connector
Specification
2258100-R
2258200-R
ASR-5405 RoHS KIT
ASR-5405 RoHS Single
ASR-5405Z RoHS Single
2266800-R
●
Adaptec RAID 5405/5405Z Activity LED Header Connector: Molex 10-89-7162 or
equivalent
●
Activity LED Header Mating Cable Connector: Molex 22-55-2161 or equivalent
J2:
22-55-2161
J2 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
Pin Number
1
2
3
4
5
6
7
8
+3.3V
2
1
4
3
6
5
8
7
ACTIVITY CN0, LANE 0
+3.3V
ACTIVITY CN0, LANE 1
+3.3V
ACTIVITY CN0, LANE 2
+3.3V
ACTIVITY CN0, LANE 3
●
Adaptec RAID 5405/5405Z Aggregate Activity LED Board Connector: Molex 22-28-4023
or equivalent
●
Aggregate LED Mating Cable Connector: Molex 50-57-9002 or equivalent
J1:
J1 Pin Number Signal
Description
LED Cathode
LED Anode
2
1
ACTIVITY
+3.3V
●
Adaptec RAID 5405/5405Z External Alarm Connector: Molex 22-28-4023 or equivalent
Alarm Mating Cable Connector: Molex 50-57-9002 or equivalent
●
J12:
J12 Pin Number Signal
Description
2
1
~2kHz Square Wave
+3.3V
Open collector transistor
—
●
Adaptec RAID 5405/5405Z I2C Board Connector: Molex 22-43-6030 or equivalent
I2C Mating Cable Connector: Molex 22-43-3030 or equivalent
●
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
126
J4:
J4 Pin Number
Signal
3
2
1
I2C Clock
Ground
I2C Data
●
Adaptec RAID 5405 Status LED Board Connector: Molex 10-89-7162 or equivalent
Status LED Mating Cable Connector: Molex 22-55-2161 or equivalent
●
J14 (Adaptec RAID 5405 only):
22-55-2161
Pin Number
J14 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
1
2
3
4
5
6
7
8
+3.3V
2
1
4
3
6
5
8
7
STATUS CN0, LANE 0
+3.3V
STATUS CN0, LANE 1
+3.3V
STATUS CN0, LANE 2
+3.3V
STATUS CN0, LANE 3
Adaptec RAID 5445/5445Z LED and I2C Connector
Specification
2228800-R
ASR-5445 RoHS Kit
2244900-R
2267000-R
ASR-5445/512MB RoHS SGL
ASR-5445Z RoHS Single
●
Adaptec RAID 5445/5445Z Activity LED Header Connector: Molex 10-89-7162 or
equivalent
●
Activity LED Header Mating Cable Connector: Molex 22-55-2161 or equivalent
J2:
Note: For Adaptec RAID 5445, header J2 is a 16-pin connector (pins 1-16). For Adaptec RAID
5445Z, header J2 is an 8-pin connector (pins 1-8 only).
22-55-2161
J2 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
Pin Number
1
2
3
4
5
+3.3V
2
1
4
3
6
ACTIVITY CN0, LANE 0
+3.3V
ACTIVITY CN0, LANE 1
+3.3V
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
127
22-55-2161
Pin Number
J2 Pin Number
Signal
Description
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
6
ACTIVITY CN0, LANE 2
+3.3V
5
7
8
8
ACTIVITY CN0, LANE 3
+3.3V
7
9
10
9
10
11
12
13
14
15
16
ACTIVITY CN1, LANE 0
+3.3V
12
11
14
13
16
15
ACTIVITY CN1, LANE 1
+3.3V
ACTIVITY CN1, LANE 2
+3.3V
ACTIVITY CN1, LANE 3
●
Adaptec RAID 5445/5445Z Aggregate Activity LED Board Connector: Molex 22-28-4023
or equivalent
●
Aggregate LED Mating Cable Connector: Molex 50-57-9002 or equivalent
J1:
J1 Pin Number Signal
Description
LED Cathode
LED Anode
2
1
ACTIVITY
+3.3V
●
Adaptec RAID 5445/5445Z External Alarm Connector: Molex 22-28-4023 or equivalent
Alarm Mating Cable Connector: Molex 50-57-9002 or equivalent
●
J12:
J12 Pin Number Signal
Description
2
1
~2kHz Square Wave
+3.3V
Open collector transistor
—
●
Adaptec RAID 5445/5445Z I2C Board Connector: Molex 22-43-6030 or equivalent
I2C Mating Cable Connector: Molex 22-43-3030 or equivalent
●
J4:
J4 Pin Number
Signal
3
2
1
I2C Clock
Ground
I2C Data
●
Adaptec RAID 5445 Status LED Board Connector: Molex 10-89-7162 or equivalent
Status LED Mating Cable Connector: Molex 22-55-2161 or equivalent
●
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
128
J14 (Adaptec RAID 5445 only):
22-55-2161
Pin Number
J14 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
1
+3.3V
2
2
STATUS CN0, LANE 0
+3.3V
1
3
4
4
STATUS CN0, LANE 1
+3.3V
3
5
6
6
STATUS CN0, LANE 2
+3.3V
5
7
8
8
STATUS CN0, LANE 3
+3.3V
7
9
10
9
10
11
12
13
14
15
16
STATUS CN1, LANE 0
+3.3V
12
11
14
13
16
15
STATUS CN1, LANE 1
+3.3V
STATUS CN1, LANE 2
+3.3V
STATUS CN1, LANE 3
Adaptec RAID 5805/5805Q/5805Z/5805ZQ LED and I2C
Connector Specification
2244100-R
ASR-5805 RoHS KIT
2244300-R
2266900-R
2268500-R
2268600-R
ASR-5805/512MB RoHS Single
ASR-5805Z RoHS Single
ASR-5805Q RoHS Single
ASR-5805ZQ RoHS Single
●
Adaptec RAID 5805/5805Q/5805Z/5805ZQ Activity LED Header Connector: Molex 10-
89-7162 or equivalent
●
Activity LED Header Mating Cable Connector: Molex 22-55-2161 or equivalent
J2:
22-55-2161
J2 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
Pin Number
1
2
3
4
5
6
+3.3V
2
1
4
3
6
5
ACTIVITY CN0, LANE 0
+3.3V
ACTIVITY CN0, LANE 1
+3.3V
ACTIVITY CN0, LANE 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
129
22-55-2161
Pin Number
J2 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
7
+3.3V
8
8
ACTIVITY CN0, LANE 3
+3.3V
7
9
10
9
10
11
12
13
14
15
16
ACTIVITY CN1, LANE 0
+3.3V
12
11
14
13
16
15
ACTIVITY CN1, LANE 1
+3.3V
ACTIVITY CN1, LANE 2
+3.3V
ACTIVITY CN1, LANE 3
●
Adaptec RAID 5805/5805Q/5805Z/5805ZQ Aggregate Activity LED Board Connector:
Molex 22-28-4023 or equivalent
●
Aggregate LED Mating Cable Connector: Molex 50-57-9002 or equivalent
J1:
J1 Pin Number Signal
Description
LED Cathode
LED Anode
2
1
ACTIVITY
+3.3V
●
Adaptec RAID 5805/5805Q/5805Z/5805ZQ External Alarm Connector: Molex 22-28-
4023 or equivalent
●
Alarm Mating Cable Connector: Molex 50-57-9002 or equivalent
J12:
J12 Pin Number Signal
Description
2
1
~2kHz Square Wave
+3.3V
Open collector transistor
—
●
Adaptec RAID 5805/5805Q/5805Z/5805ZQ I2C CN0 Board Connector: Molex 22-43-
6030 or equivalent
●
I2C Mating Cable Connector: Molex 22-43-3030 or equivalent
J4:
J4 Pin Number
Signal
3
2
1
I2C Clock
Ground
I2C Data
●
Adaptec RAID 5805/5805Q/5805Z/5805ZQ I2C CN1 Board Connector: Molex 22-43-
6030 or equivalent
●
I2C Mating Cable Connector: Molex 22-43-3030 or equivalent
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
130
J5:
J5 Pin Number
Signal
3
2
1
I2C Clock
Ground
I2C Data
●
Adaptec RAID 5805/5805Q Status LED Board Connector: Molex 10-89-7162 or
equivalent
●
Status LED Mating Cable Connector: Molex 22-55-2161 or equivalent
J14 (Adaptec RAID 5805/5805Q only):
22-55-2161
Pin Number
J14 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
1
+3.3V
2
2
STATUS CN0, LANE 0
+3.3V
1
3
4
4
STATUS CN0, LANE 1
+3.3V
3
5
6
6
STATUS CN0, LANE 2
+3.3V
5
7
8
8
STATUS CN0, LANE 3
+3.3V
7
9
10
9
10
11
12
13
14
15
16
STATUS CN1, LANE 0
+3.3V
12
11
14
13
16
15
STATUS CN1, LANE 1
+3.3V
STATUS CN1, LANE 2
+3.3V
STATUS CN1, LANE 3
Adaptec RAID 51245 LED and I2C Connector Specification
2268200-R
2268300-R
ASR-51245 RoHS Kit
ASR-51245 RoHS Single
●
●
Adaptec RAID 51245 Activity LED Header Connector for CN0/CN1: Molex 10-89-7162
or equivalent
Activity LED Header Mating Cable Connector: Molex 22-55-2161 or equivalent
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
131
J3:
22-55-2161
J3 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
Pin Number
1
+3.3V
2
2
ACTIVITY CN1, LANE 0
+3.3V
1
3
4
4
ACTIVITY CN1, LANE 1
+3.3V
3
5
6
6
ACTIVITY CN1, LANE 2
+3.3V
5
7
8
8
ACTIVITY CN1, LANE 3
+3.3V
7
9
10
9
10
11
12
13
14
15
16
ACTIVITY CN0, LANE 0
+3.3V
12
11
14
13
16
15
ACTIVITY CN0, LANE 1
+3.3V
ACTIVITY CN0, LANE 2
+3.3V
ACTIVITY CN0, LANE 3
●
Adaptec RAID 51245 Activity LED Board Connector for CN2: Molex 10-89-7162 or
equivalent
●
Activity LED Mating Cable Connector: Molex 22-55-2161 or equivalent
J1:
22-55-2161
J1 Pin Number
Signal
Description
Unused
Pin Number
1
Unused
2
2
Unused
Unused
1
3
Unused
Unused
4
4
Unused
Unused
3
5
Unused
Unused
6
6
Unused
Unused
5
7
Unused
Unused
8
8
Unused
Unused
7
9
+3.3V
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
10
9
10
11
12
13
14
15
16
ACTIVITY CN2, LANE 0
+3.3V
12
11
14
13
16
15
ACTIVITY CN2, LANE 1
+3.3V
ACTIVITY CN2, LANE 2
+3.3V
ACTIVITY CN2, LANE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
132
●
Adaptec RAID 51245 Aggregate Activity LED Board Connector: Molex 22-28-4023 or
equivalent
●
Aggregate LED Mating Cable Connector: Molex 50-57-9002 or equivalent
J10:
J10 Pin Number
Signal
Description
LED Cathode
LED Anode
2
1
ACTIVITY
+3.3V
●
Adaptec RAID 51245 External Alarm Connector: Molex 22-28-4023 or equivalent
Alarm Mating Cable Connector: Molex 50-57-9002 or equivalent
●
J12:
J12 Pin Number Signal
Description
2
1
~2kHz Square Wave
+3.3V
Open collector transistor
—
●
Adaptec RAID 51245 I2C Board Connector: Molex 22-43-6030 or equivalent
I2C Mating Cable Connector: Molex 22-43-3030 or equivalent
●
J28, J29, J30:
J2x Pin Number Signal
3
2
1
I2C Clock
Ground
I2C Data
Adaptec RAID 51645 LED and I2C Connector Specification
2258500-R
2258600-R
ASR-51645 RoHS Kit
ASR-51645 RoHS Single
●
Adaptec RAID 51645 Activity LED Header Connector for CN0/CN1: Molex 10-89-7162
or equivalent
●
Activity LED Header Mating Cable Connector: Molex 22-55-2161 or equivalent
J3:
22-55-2161
J3 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
Pin Number
1
2
3
4
5
+3.3V
2
1
4
3
6
ACTIVITY CN1, LANE 0
+3.3V
ACTIVITY CN1, LANE 1
+3.3V
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
133
22-55-2161
Pin Number
J3 Pin Number
Signal
Description
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
6
ACTIVITY CN1, LANE 2
+3.3V
5
7
8
8
ACTIVITY CN1, LANE 3
+3.3V
7
9
10
9
10
11
12
13
14
15
16
ACTIVITY CN0, LANE 0
+3.3V
12
11
14
13
16
15
ACTIVITY CN0, LANE 1
+3.3V
ACTIVITY CN0, LANE 2
+3.3V
ACTIVITY CN0, LANE 3
●
Adaptec RAID 51645 Activity LED Board Connector for CN2/CN3: Molex 10-89-7162 or
equivalent
●
Activity LED Mating Cable Connector: Molex 22-55-2161 or equivalent
J1:
22-55-2161
J1 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
Pin Number
1
+3.3V
2
2
ACTIVITY CN3, LANE 0
+3.3V
1
3
4
4
ACTIVITY CN3, LANE 1
+3.3V
3
5
6
6
ACTIVITY CN3, LANE 2
+3.3V
5
7
8
8
ACTIVITY CN3, LANE 3
+3.3V
7
9
10
9
10
11
12
13
14
15
16
ACTIVITY CN2, LANE 0
+3.3V
12
11
14
13
16
15
ACTIVITY CN2, LANE 1
+3.3V
ACTIVITY CN2, LANE 2
+3.3V
ACTIVITY CN2, LANE 3
●
Adaptec RAID 51645 Aggregate Activity LED Board Connector: Molex 22-28-4023 or
equivalent
●
Aggregate LED Mating Cable Connector: Molex 50-57-9002 or equivalent
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
134
J10:
J10 Pin Number
Signal
Description
LED Cathode
LED Anode
2
1
ACTIVITY
+3.3V
●
Adaptec RAID 51645 External Alarm Connector: Molex 22-28-4023 or equivalent
Alarm Mating Cable Connector: Molex 50-57-9002 or equivalent
●
J12:
J12 Pin Number Signal
Description
2
1
~2kHz Square Wave
+3.3V
Open collector transistor
—
●
Adaptec RAID 51645 I2C Board Connector: Molex 22-43-6030 or equivalent
I2C Mating Cable Connector: Molex 22-43-3030 or equivalent
●
J27, J28, J29, J30:
J2x Pin Number Signal
3
2
1
I2C Clock
Ground
I2C Data
Adaptec RAID 52445 LED and I2C Connector Specification
2258800-R
2258700-R
ASR-52445 RoHS Kit
ASR-52445 RoHS Single
●
Adaptec RAID 52445 Activity LED Header Connector for CN0/CN1: Molex 10-89-7162
or equivalent
●
Activity LED Header Mating Cable Connector: Molex 22-55-2161 or equivalent
J3:
22-55-2161
J3 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
Pin Number
1
2
3
4
5
6
7
8
+3.3V
2
1
4
3
6
5
8
7
ACTIVITY CN1, LANE 0
+3.3V
ACTIVITY CN1, LANE 1
+3.3V
ACTIVITY CN1, LANE 2
+3.3V
ACTIVITY CN1, LANE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
135
22-55-2161
Pin Number
J3 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
9
+3.3V
10
9
10
11
12
13
14
15
16
ACTIVITY CN0, LANE 0
+3.3V
12
11
14
13
16
15
ACTIVITY CN0, LANE 1
+3.3V
ACTIVITY CN0, LANE 2
+3.3V
ACTIVITY CN0, LANE 3
●
Adaptec RAID 52445 Activity LED Board Connector for CN2/CN3: Molex 10-89-7162 or
equivalent
●
Activity LED Mating Cable Connector: Molex 22-55-2161 or equivalent
J1:
22-55-2161
J1 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
Pin Number
1
+3.3V
2
2
ACTIVITY CN3, LANE 0
+3.3V
1
3
4
4
ACTIVITY CN3, LANE 1
+3.3V
3
5
6
6
ACTIVITY CN3, LANE 2
+3.3V
5
7
8
8
ACTIVITY CN3, LANE 3
+3.3V
7
9
10
9
10
11
12
13
14
15
16
ACTIVITY CN2, LANE 0
+3.3V
12
11
14
13
16
15
ACTIVITY CN2, LANE 1
+3.3V
ACTIVITY CN2, LANE 2
+3.3V
ACTIVITY CN2, LANE 3
●
Adaptec RAID 52445 Activity LED Header Connector for CN4/CN5: Molex 10-89-7162
or equivalent
●
Activity LED Header Mating Cable Connector: Molex 22-55-2161 or equivalent
J2:
22-55-2161
J2 Pin Number
Signal
Description
LED Anode
LED Cathode
Pin Number
1
2
+3.3V
2
1
ACTIVITY CN4, LANE 0
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
136
22-55-2161
Pin Number
J2 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
3
+3.3V
4
4
ACTIVITY CN4, LANE 1
+3.3V
3
5
6
6
ACTIVITY CN4, LANE 2
+3.3V
5
7
8
8
ACTIVITY CN4, LANE 3
+3.3V
7
9
10
9
10
11
12
13
14
15
16
ACTIVITY CN5, LANE 0
+3.3V
12
11
14
13
16
15
ACTIVITY CN5, LANE 1
+3.3V
ACTIVITY CN5, LANE 2
+3.3V
ACTIVITY CN5, LANE 3
●
Adaptec RAID 52445 Aggregate Activity LED Board Connector: Molex 22-28-4023 or
equivalent
●
Aggregate LED Mating Cable Connector: Molex 50-57-9002 or equivalent
J10:
J10 Pin Number
Signal
Description
LED Cathode
LED Anode
2
1
ACTIVITY
+3.3V
●
Adaptec RAID 52445 External Alarm Connector: Molex 22-28-4023 or equivalent
Alarm Mating Cable Connector: Molex 50-57-9002 or equivalent
●
J12:
J12 Pin Number Signal
Description
2
1
~2kHz Square Wave
+3.3V
Open collector transistor
—
●
Adaptec RAID 52445 I2C Board Connector: Molex 22-43-6030 or equivalent
I2C Mating Cable Connector: Molex 22-43-3030 or equivalent
●
J25, J26, J27, J28, J29, J30:
J2x Pin Number Signal
3
2
1
I2C Clock
Ground
I2C Data
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
137
Adaptec RAID 2045 LED Connector Specification
2260300-R
ASR-2045 RoHS SGL
●
Adaptec RAID 2045 Aggregate Activity LED Board Connector: Molex 22-28-4023 or
equivalent
●
Aggregate LED Mating Cable Connector: Molex 50-57-9002 or equivalent
J1:
J1 Pin Number Signal
Description
LED Cathode
LED Anode
2
1
ACTIVITY
+3.3V
Adaptec RAID 2405/2405Q LED and I2C Connector
Specification
2260100-R
2260200-R
2268300-R
ASR-2405 RoHS KIT
ASR-2405 RoHS SGL
ASR-2405Q RoHS Single
●
Adaptec RAID 2405/2405Q Activity LED Header Connector: Molex 10-89-7082 or
equivalent
●
Activity LED Header Mating Cable Connector: Molex 22-55-2081 or equivalent
J2:
22-55-2161
J2 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
Pin Number
1
2
3
4
5
6
7
8
+3.3V
2
1
4
3
6
5
8
7
ACTIVITY CN0, LANE 0
+3.3V
ACTIVITY CN0, LANE 1
+3.3V
ACTIVITY CN0, LANE 2
+3.3V
ACTIVITY CN0, LANE 3
●
Adaptec RAID 2405/2405Q Aggregate Activity LED Board Connector: Molex 22-28-4023
or equivalent
●
Aggregate LED Mating Cable Connector: Molex 50-57-9002 or equivalent
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
138
J1:
J1 Pin Number Signal
Description
LED Cathode
LED Anode
2
1
ACTIVITY
+3.3V
●
Adaptec RAID 2405/2405Q I2C Board Connector: Molex 22-43-6030 or equivalent
I2C Mating Cable Connector: Molex 22-43-3030 or equivalent
●
J4:
J4 Pin Number
Signal
3
2
1
I2C Clock
Ground
I2C Data
Adaptec RAID 2805 LED and I2C Connector Specification
2269600-R
2269500-R
ASR-2805 RoHS KIT
ASR-2805 RoHS SGL
●
Adaptec RAID 2805 Activity LED Header Connector: Molex 10-89-7162 or equivalent
Activity LED Header Mating Cable Connector: Molex 22-55-2161 or equivalent
●
J2:
22-55-2161
J2 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
Pin Number
1
+3.3V
2
2
ACTIVITY CN0, LANE 0
+3.3V
1
3
4
4
ACTIVITY CN0, LANE 1
+3.3V
3
5
6
6
ACTIVITY CN0, LANE 2
+3.3V
5
7
8
8
ACTIVITY CN0, LANE 3
+3.3V
7
9
10
9
10
11
12
13
14
15
16
ACTIVITY CN1, LANE 0
+3.3V
12
11
14
13
16
15
ACTIVITY CN1, LANE 1
+3.3V
ACTIVITY CN1, LANE 2
+3.3V
ACTIVITY CN1, LANE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
139
●
Adaptec RAID 2805 Aggregate Activity LED Board Connector: Molex 22-28-4023 or
equivalent
●
Aggregate LED Mating Cable Connector: Molex 50-57-9002 or equivalent
J1:
J1 Pin Number Signal
Description
LED Cathode
LED Anode
2
1
ACTIVITY
+3.3V
●
Adaptec RAID 2805 I2C CN0 Board Connector: Molex 22-43-6030 or equivalent
I2C Mating Cable Connector: Molex 22-43-3030 or equivalent
●
J4:
J4 Pin Number
Signal
3
2
1
I2C Clock
Ground
I2C Data
●
Adaptec RAID 2805 I2C CN1 Board Connector: Molex 22-43-6030 or equivalent
I2C Mating Cable Connector: Molex 22-43-3030 or equivalent
●
J5:
J4 Pin Number
Signal
3
2
1
I2C Clock
Ground
I2C Data
Adaptec RAID 6405/6445 LED and I2C Connector Specification
ASR-6405 Kit
ASR-6405 SGL
ASR-6445 SGL
2271100-R
2270000-R
2270200-R
●
Adaptec RAID 6405/6445 Activity LED Header Connector: Molex 22-43-6030 or
equivalent
●
Activity LED Header Mating Cable Connector: Molex 22-55-2161 or equivalent
J2:
22-55-2161
J2 Pin Number
Signal
Description
LED Anode
LED Cathode
Pin Number
1
2
+3.3V
2
1
ACTIVITY CN0, LANE 0
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
140
22-55-2161
Pin Number
J2 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
3
4
5
6
7
8
+3.3V
4
3
6
5
8
7
ACTIVITY CN0, LANE 1
+3.3V
ACTIVITY CN0, LANE 2
+3.3V
ACTIVITY CN0, LANE 3
●
Adaptec RAID 6405/6445 Aggregate Activity LED Board Connector: Molex 22-28-4023
or equivalent
●
Aggregate LED Mating Cable Connector: Molex 50-57-9002 or equivalent
J1:
J1 Pin Number Signal
Description
LED Cathode
LED Anode
2
1
ACTIVITY
+3.3V
●
Adaptec RAID 6405/6445 External Alarm Connector: Molex 22-28-4023 or equivalent
Alarm Mating Cable Connector: Molex 50-57-9002 or equivalent
●
J12:
J12 Pin Number Signal
Description
2
1
~2kHz Square Wave
+3.3V
Open collector transistor
—
●
Adaptec RAID 6405/6445 I2C CN0 Board Connector: Molex 22-43-6030 or equivalent
I2C Mating Cable Connector: Molex 22-43-3030 or equivalent
●
J4:
J4 Pin Number
Signal
3
2
1
I2C Clock, CN0
Ground
I2C Data, CN0
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
141
Adaptec RAID 6805/6805Q LED and I2C Connector
Specification
2271200-R
2270100-R
2270700-R
ASR-6805 Kit
ASR-6805 SGL
ASR-6805Q SGL
●
Adaptec RAID 6805/6805Q Activity LED Header Connector: Molex 22-43-6030 or
equivalent
●
Activity LED Header Mating Cable Connector: Molex 22-55-2161 or equivalent
J2:
22-55-2161
J2 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
Pin Number
1
+3.3V
2
2
ACTIVITY CN0, LANE 0
+3.3V
1
3
4
4
ACTIVITY CN0, LANE 1
+3.3V
3
5
6
6
ACTIVITY CN0, LANE 2
+3.3V
5
7
8
8
ACTIVITY CN0, LANE 3
+3.3V
7
9
10
9
10
11
12
13
14
15
16
ACTIVITY CN1, LANE 0
+3.3V
12
11
14
13
16
15
ACTIVITY CN1, LANE 1
+3.3V
ACTIVITY CN1, LANE 2
+3.3V
ACTIVITY CN1, LANE 3
●
Adaptec RAID 6805/6805Q Aggregate Activity LED Board Connector: Molex 22-28-4023
or equivalent
●
Aggregate LED Mating Cable Connector: Molex 50-57-9002 or equivalent
J1:
J1 Pin Number Signal
Description
LED Cathode
LED Anode
2
1
ACTIVITY
+3.3V
●
Adaptec RAID 6805/6805Q External Alarm Connector: Molex 22-28-4023 or equivalent
Alarm Mating Cable Connector: Molex 50-57-9002 or equivalent
●
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
142
J12:
J12 Pin Number Signal
Description
2
1
~2kHz Square Wave
+3.3V
Open collector transistor
—
●
Adaptec RAID 6805/6805Q I2C CN0 Board Connector: Molex 22-43-6030 or equivalent
I2C Mating Cable Connector: Molex 22-43-3030 or equivalent
●
J4:
J4 Pin Number
Signal
3
2
1
I2C Clock, CN0
Ground
I2C Data, CN0
●
Adaptec RAID 6805/6805Q I2C CN1 Board Connector: Molex 22-43-6030 or equivalent
I2C Mating Cable Connector: Molex 22-43-3030 or equivalent
●
J5:
J4 Pin Number
Signal
3
2
1
I2C Clock, CN1
Ground
I2C Data, CN1
Adaptec RAID 6405E LED Connector Specification
ASR-6405E Kit
ASR-6405E SGL
2271700-R
2270800-R
●
Adaptec RAID 6405E Activity LED Header Connector: Molex 22-43-6030 or equivalent
Activity LED Header Mating Cable Connector: Molex 22-55-2161 or equivalent
●
J2:
22-55-2161
J2 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
Pin Number
1
2
3
4
5
6
7
8
+3.3V
2
1
4
3
6
5
8
7
ACTIVITY CN0, LANE 0
+3.3V
ACTIVITY CN0, LANE 1
+3.3V
ACTIVITY CN0, LANE 2
+3.3V
ACTIVITY CN0, LANE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
143
●
Adaptec RAID 6405E Aggregate Activity LED Board Connector: Molex 22-28-4023 or
equivalent
●
Aggregate LED Mating Cable Connector: Molex 50-57-9002 or equivalent
J1:
J1 Pin Number Signal
Description
LED Cathode
LED Anode
2
1
ACTIVITY
+3.3V
●
Adaptec RAID 6405E External Alarm Connector: Molex 22-28-4023 or equivalent
Alarm Mating Cable Connector: Molex 50-57-9002 or equivalent
●
J12:
J12 Pin Number Signal
Description
2
1
~2kHz Square Wave
+3.3V
Open collector transistor
—
Adaptec RAID 6805E LED Connector Specification
2271800-R
2270900-R
ASR-6805E Kit
ASR-6805E SGL
●
Adaptec RAID 6805E Activity LED Header Connector: Molex 22-43-6030 or equivalent
Activity LED Header Mating Cable Connector: Molex 22-55-2161 or equivalent
●
J2:
22-55-2161
J2 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
Pin Number
1
+3.3V
2
2
ACTIVITY CN0, LANE 0
+3.3V
1
3
4
4
ACTIVITY CN0, LANE 1
+3.3V
3
5
6
6
ACTIVITY CN0, LANE 2
+3.3V
5
7
8
8
ACTIVITY CN0, LANE 3
+3.3V
7
9
10
9
10
11
12
13
14
ACTIVITY CN1, LANE 0
+3.3V
12
11
14
13
ACTIVITY CN1, LANE 1
+3.3V
ACTIVITY CN1, LANE 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
144
22-55-2161
Pin Number
J2 Pin Number
Signal
Description
LED Anode
LED Cathode
15
16
+3.3V
16
15
ACTIVITY CN1, LANE 3
●
Adaptec RAID 6805E Aggregate Activity LED Board Connector: Molex 22-28-4023 or
equivalent
●
Aggregate LED Mating Cable Connector: Molex 50-57-9002 or equivalent
J1:
J1 Pin Number Signal
Description
LED Cathode
LED Anode
2
1
ACTIVITY
+3.3V
●
Adaptec RAID 6805E External Alarm Connector: Molex 22-28-4023 or equivalent
Alarm Mating Cable Connector: Molex 50-57-9002 or equivalent
●
J12:
J12 Pin Number Signal
Description
2
1
~2kHz Square Wave
+3.3V
Open collector transistor
—
Adaptec RAID 6405T LED Connector Specification
2272700-R
ASR-6405T SGL
●
Adaptec RAID 6405T Activity LED Header Connector: Molex 22-43-6030 or equivalent
Activity LED Header Mating Cable Connector: Molex 22-55-2161 or equivalent
●
J2:
22-55-2161
J2 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
Pin Number
1
2
3
4
5
6
7
8
+3.3V
2
1
4
3
6
5
8
7
ACTIVITY CN0, LANE 0
+3.3V
ACTIVITY CN0, LANE 1
+3.3V
ACTIVITY CN0, LANE 2
+3.3V
ACTIVITY CN0, LANE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
145
●
Adaptec RAID 6405T Aggregate Activity LED Board Connector: Molex 22-28-4023 or
equivalent
●
Aggregate LED Mating Cable Connector: Molex 50-57-9002 or equivalent
J1:
J1 Pin Number Signal
Description
LED Cathode
LED Anode
2
1
ACTIVITY
+3.3V
●
Adaptec RAID 6405T External Alarm Connector: Molex 22-28-4023 or equivalent
Alarm Mating Cable Connector: Molex 50-57-9002 or equivalent
●
J12:
J12 Pin Number Signal
Description
2
1
~2kHz Square Wave
+3.3V
Open collector transistor
—
Adaptec RAID 6805T/6805TQ LED Connector Specification
2272800-R
2273700-R
2273600-R
ASR-6805T SGL
ASR-6805T with AFM-600 Bulk
ASR-6805TQ SGL
●
Adaptec RAID 6805T/6805TQ Activity LED Header Connector: Molex 22-43-6030 or
equivalent
●
Activity LED Header Mating Cable Connector: Molex 22-55-2161 or equivalent
J2:
22-55-2161
J2 Pin Number
Signal
Description
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
LED Cathode
LED Anode
Pin Number
1
+3.3V
2
2
ACTIVITY CN0, LANE 0
+3.3V
1
3
4
4
ACTIVITY CN0, LANE 1
+3.3V
3
5
6
6
ACTIVITY CN0, LANE 2
+3.3V
5
7
8
8
ACTIVITY CN0, LANE 3
+3.3V
7
9
10
9
10
11
12
13
ACTIVITY CN1, LANE 0
+3.3V
12
11
14
ACTIVITY CN1, LANE 1
+3.3V
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Controller LED and I2C Connector Quick Reference
●
146
22-55-2161
Pin Number
J2 Pin Number
Signal
Description
LED Cathode
LED Anode
14
15
16
ACTIVITY CN1, LANE 2
+3.3V
13
16
15
ACTIVITY CN1, LANE 3
LED Cathode
●
Adaptec RAID 6805T/6805TQ Aggregate Activity LED Board Connector: Molex 22-28-
4023 or equivalent
●
Aggregate LED Mating Cable Connector: Molex 50-57-9002 or equivalent
J1:
J1 Pin Number Signal
Description
LED Cathode
LED Anode
2
1
ACTIVITY
+3.3V
●
Adaptec RAID 6805T/6805TQ External Alarm Connector: Molex 22-28-4023 or
equivalent
●
Alarm Mating Cable Connector: Molex 50-57-9002 or equivalent
J12:
J12 Pin Number Signal
Description
2
1
~2kHz Square Wave
+3.3V
Open collector transistor
—
●
Adaptec RAID 6805T/6805TQ Aggregate Activity LED Board Connector: Molex 22-28-
4023 or equivalent
●
Aggregate LED Mating Cable Connector: Molex 50-57-9002 or equivalent
J1:
J1 Pin Number Signal
Description
LED Cathode
LED Anode
2
1
ACTIVITY
+3.3V
●
Adaptec RAID 6805T/6805TQ External Alarm Connector: Molex 22-28-4023 or
equivalent
●
Alarm Mating Cable Connector: Molex 50-57-9002 or equivalent
J12:
J12 Pin Number Signal
Description
2
1
~2kHz Square Wave
+3.3V
Open collector transistor
—
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
F
To ensure your personal safety and the safety of your equipment:
●
●
Keep your work area and the computer clean and clear of debris.
Before opening the system cabinet, unplug the power cord.
Electrostatic Discharge (ESD)
Caution: ESD can damage electronic components when they are improperly handled, and
can result in total or intermittent failures. Always follow ESD-prevention procedures when
removing and replacing components.
!
To prevent ESD damage:
●
Use an ESD wrist or ankle strap and ensure that it makes skin contact. Connect the
equipment end of the strap to an unpainted metal surface on the chassis.
If a wrist strap is not available, ground yourself by touching the metal chassis before
handling the controller or any other part of the computer.
●
●
Avoid touching the controller against your clothing. The wrist strap protects components
from ESD on the body only.
Handle the controller by its bracket or edges only. Avoid touching the printed circuit
board or the connectors.
●
●
Put the controller down only on an antistatic surface such as the bag supplied in your kit.
If you are returning the controller to Adaptec by PMC Product Support, put it back in its
antistatic bag immediately.
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
G
In this appendix...
Environmental Specifications.............................................................................................. 149
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix G: Technical Specifications
●
149
Environmental Specifications
Note: Adaptec RAID controllers require adequate airflow to operate reliably. The recommended
airflow is 200 LFM (linear feet per minute). Forced airflow is recommended.
Ambient temperature with forced airflow
0 °C to 55 °C
0 °C to 40 °C
Ambient temperature with Battery Backup Unit (BBU)1
Relative humidity
Altitude
10% to 90%, noncondensing
Up to 3,000 meters
1
Note: Ambient temperature is measured 1” from RAID processor.
DC Power Requirements
Bus Type
Description
Requirements
PCIe
PCIe
Ripple and noise
DC Voltage
50 mV peak-to-peak (max)
3.3 V 9%, 12 V 8%
Current Requirements
Adaptec Model
Typical Current
Adaptec RAID 5085
0.45 A @ 3.3 VDC; 1.0 A @ 12.0 VDC
0.45 A @ 3.3 VDC; 1.0 A @ 12.0 VDC
0.45A @ 3.3 VDC; 0.94A @ 12.0 VDC
0.45A @ 3.3 VDC; 1.0A @ 12.0 VDC
0.39 A @ 3.3 VDC; 1.21 A @ 12.0 VDC
0.38 A @ 3.3 VDC; 1.18 A @ 12.0 VDC
0.40 A @ 3.3 VDC; 1.24 A @ 12.0 VDC
0.47A @ 3.3 VDC; 1.68A @ 12.0 VDC
0.47A @ 3.3 VDC; 1.72A @ 12.0 VDC
0.47A @ 3.3 VDC; 1.78A @ 12.0 VDC
0.43A @ 3.3 VDC; 0.83A @ 12.0 VDC
0.43A @ 3.3 VDC; 0.83A @ 12.0 VDC
0.5A @ 3.3 VDC; 0.95A @ 12.0 VDC
0.17A @ 3.3 VDC; 1.25A @ 12.0 VDC
0.17A @ 3.3 VDC; 1.25A @ 12.0 VDC
0.17A @ 3.3 VDC; 1.25A @ 12.0 VDC
0.11A @ 3.3 VDC; 0.75A @ 12.0 VDC
0.125A @ 3.3 VDC; 0.80A @ 12.0 VDC
0.125A @ 3.3 VDC; 0.97A @ 12.0 VDC
0.125A @ 3.3 VDC; 0.97A @ 12.0 VDC
Adaptec RAID 5805/5805Q
Adaptec RAID 5405
Adaptec RAID 5445
Adaptec RAID 5805Z/5805ZQ
Adaptec RAID 5405Z
Adaptec RAID 5445Z
Adaptec RAID 51245
Adaptec RAID 51645
Adaptec RAID 52445
Adaptec RAID 2045
Adaptec RAID 2405/2405Q
Adaptec RAID 2805
Adaptec RAID 6405
Adaptec RAID 6445
Adaptec RAID 6805/6805Q
Adaptec RAID 6405E
Adaptec RAID 6805E
Adaptec RAID 6405T
Adaptec RAID 6805T/6805TQ
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
managing with ACU 106
non-redundant 96
RAID 1 97
RAID 10 98
RAID 1E 97
RAID 5 99
RAID 50 101
RAID 5EE 100
RAID 6 102
A
activity LED connector specifications 122
arrays 55
creating bootable arrays 106
initializing disk drives 108
managing arrays 106
rescanning disk drives 108
secure erasing disk drives 108
stopping a secure erase 108
Adaptec CIM Provider 82
RAID 60 102
arrays (bootable) 54
audible alarm 84
automatic failover 18
Automatic Failover setting 111
Adaptec customer support
ARCCONF
Adaptec Storage Manager 80
creating arrays 57
B
battery backup module 19
BBU 19
installing 80
Big Block Bypass mode 112
boot controller 55
advanced data protection 19
Alarm Control setting 111
ARCCONF 80
bootable arrays 58
array migration 18
Array-based BBS Support setting 111
arrays
C
CD-ROM Boot Support setting 111
command line interface (flash utility) 118
command line utility 80
contents of controller kit 15
controllers
creating (Adaptec Storage Manager) 57
creating bootable arrays 106
making an array bootable 58
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
●
151
activity LED connector specifications 122
Alarm Control setting 111
Array-based BBS Support setting 111
array-level features 18
Automatic Failover setting 111
CD-ROM Boot Support setting 111
connecting disk drives 50
connecting external devices 53
CRC Checking setting 113
data protection 19
disk drives 42
Drive’s Write Cache setting 111
event log 114
multiple arrays 85
multiple disk drives 86
RAID 0 arrays 86
with hot spare 85
without hot spare 85
formatting 113
identifying 114
initializing 108
recovering from failure 85
rescanning 108
SAS identifiers 92
secure erasing 108
stopping a secure erase 108
types of connections 114
verifying 113
drive requirements 42
Drive’s Write Cache setting 111
driver and operating system installation 59
driver disk 60
drivers
firmware 116
flashing 86
I2C connector specifications 122
installation options 45
installing 47
modifying general settings 111
Phy Rate setting 113
Physical Drives Display During POST setting 111
RAID levels 41
Removable Media Devices Boot Support setting
installing on FreeBSD 78
installing on Solaris 76
installing on Windows 74
installing with FreeBSD 71
installing with Windows 61
E
resetting 86
electrostatic discharge 147
end devices 89
event log 114
Runtime BIOS setting 111
SAS Address setting 113
SAS cables 42
expander connections 93
expander devices 89
external devices 53
setting boot controller 55
specifications 148
troubleshooting 84
F
updating firmware 116
upgrading firmware 19
copyback 19
failed disk drives 85
multiple arrays 85
CRC Checking setting 113
multiple disk drives 86
RAID 0 arrays 86
customer support
without hot spare 85
firmware 116
D
creating floppy disks 117
firmware upgrades 19
flashing controllers 86
floppy disks for firmware update 117
formatting disk drives 113
FreeBSD
connecting to controllers 50
connections 114
external 53
failure recovery
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
●
152
driver installation 78
OS installation 71
mini-SAS
direct connection 50
enclosure cable 42
internal cable 42
overview 91
H
HDA mode 86
mirroring 41
mode 0 flash 86
HDA mode jumper 86
hot spares 18
N
I
NCQ 18
I2C connector specifications 122
initializing disk drives 108
installation
non-redundant arrays 96
O
backplane 51
controllers 47
online expansion 18
creating a driver disk 60
direct-attach 50
operating system installation 59
operating systems 15
disk drives 50
P
driver and FreeBSD 71
driver and operating system 59
driver and Windows 61
existing operating system 45
external devices 53
installation options 45
with operating system 45
parity 41
Phy Rate setting 113
phys 90
Physical Drives Display During POST setting 111
R
non-redundant arrays 96
RAID 0 96
RAID 1 97
RAID 10 98
RAID 5 99
K
kit contents 15
RAID 50 101
L
LED connector specifications 122
LED Indication Mode 111
Linux
RAID levels 41
OS installation 63
Linux installation 62
low-profile bracket 15
recovering from disk drive failure 85
Red Hat
OS installation 62
Removable Media Devices Boot Support setting 111
replacing failed disk drives 85
requirements 15
M
maxCache cache settings 105
maxCache pool 109
maxCache Solid State Drive
failed 86
drive 42
rescanning disk drives 108
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
●
153
resetting controllers 86
storage management
Runtime BIOS setting 111
Adaptec RAID Configuration utility 81
Adaptec Storage Manager 80
AFU 81
S
ARCCONF 80
safety information 147
storage space 13
support, customer
4-wide ports 91
backplane connections 92
cables 42
SUSE installation 63
system requirements 15
comparison to parallel SCSI 94
connectors 91
description 89
T
technical specifications 148
direct-attach connections 92
disk drives 92
technical support
Technical Support Identification (TSID) number
edge expanders 93
end devices 89
terminology 13
SAS 89
expander connections 93
expander devices 89
fanout expanders 93
link speed 89
tools
Adaptec RAID Configuration utility 81
Adaptec Storage Manager 80
AFU 81
links 90
ARCCONF 80
narrow connectors 91
narrow ports 91
troubleshooting tips 83
TSID Number
phys 90
See Technical Support Identification Number
SAS address 91
SAS cards 89
U
updating firmware 116
upgrading firmware 19
utilities
SAS devices 89
SAS domain 93
terminology 89
transceivers 90
wide connectors 91
wide ports 91
Adaptec RAID Controller utility 81
AFU 81
ARCCONF 80
SAS Address setting 113
SAS devices 89
V
verifying disk drives 113
VMWare
SAS disk drive identifiers 92
secure erasing disk drives 108
stopping a secure erase 108
Selectable Performance Mode 112
W
Windows
applying changes 110
exiting 110
driver installation 74
OS installation 61
modifying controller settings 110
opening 110
software 80
Z
Solaris
driver installation 76
specifications 148
Download from Www.Somanuals.com. All Manuals Search And Download.
PMC-Sierra, Inc.
1380 Bordeaux Drive
Sunnyvale, CA 94089 USA
© Copyright PMC-Sierra, Inc. 2011
All rights reserved. Adaptec and the Adaptec by PMC logo
are trademarks of PMC-Sierra, Inc.
Part Number: CDP-00268-01-A Rev. B
JB 12/10
Download from Www.Somanuals.com. All Manuals Search And Download.
|