Setup Guide
Everything you need to get going with your new
Xsight™ Touch remote control:
>>Out of the Box
>>Installing the EZ-RC™ Remote Control Setup
Wizard
>>Creating Activities
>>Creating Favorites & Profiles
Download from Www.Somanuals.com. All M>a>nTuarolsuSbealercshhAonodtDinogwnload.
Charge the remote
2
The next step is to install the Xsight™ Touch’s rechargeable battery, plug in its cradle, and let it charge for 3 to 4
hours.
Remove the battery door from the
Install the rechargeable battery
Assemble the charging cradle by
back of the Xsight™ Touch. Press up
in the Xsight™ Touch’s battery
sliding the cradle rest into the cradle
on the latch to release the door.
compartment and replace the battery base as shown here.
door.
You can use the remote right away
(battery’s charged), but we recommend
full charge before first use—3–4 hours.
Plug the AC adapter into the cradle
as shown. Plug the other end of the
adapter into a wall outlet or surge
protector.
Need help setting up this
remote?
Please call our help line toll-free at
1-800-276-0509.
Place the remote in the cradle and
leave it to charge for 3–4 hours.
Out of the Box
3
Download from Www.Somanuals.com. All Manuals Search And Download.
The interactive touchscreen
The top of the Xsight™ Touch features a customizable touch screen that can be
set up using keys on the remote or by connecting the remote to your PC.
To use the functions displayed, simply touch the screen
where the function is.
To move between the pages, push your finger along the
slider bar. Multiple pages will wrap around—if you scroll
right to the last page, scrolling right again will take you
back to the first page.
The top of the remote also offers Shortcut keys to give you one-touch access
to some of the remote’s advanced functions:
(Home/Back) goes back one screen in the menus. Holding this key
down for two seconds takes the remote to the Home Screen.
(Favorites) accesses the Favorites screen directly.
(Activities) accesses the Activities screen directly.
(Devices) accesses the Devices screen directly.
4
Out of the Box
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Setup
3
Once the remote has finished charging, pick it up from its cradle. The Xsight™ Touch has sensors that wake the LCD
screen up automatically (you can also wake it up by pressing a key). The Xsight™ Touch has screens that guide you
through the initial setup process.
Welcome to your
Your language
Your region
Your preferred clock
The time now is:
Xsight Touch! To
scroll between pages,
just brush the slider
bar below with your
thumb.
North
America
Europe
Asia
English
Espanol
PM
12:30
Mid East
Africa
12 Hour
24 Hour
Francais Italiano
Hour
Min
Latin
America
Pacific
Deutsch
Norsk
Finish
Set Language
Press the
language you
Set Region
Press the region
where you live
Set Your
Preferred Clock
Press the way
Set Time
Press the Hour
and Min on-
screen keys to
adjust the time
Tutorial
The next few
screens take you
through a quick
tutorial to get you
familiar with the
touch screen. Use
the scroll bar to
go through the
screens.
want the remote’s (North America). you’d like the
menus to appear
in (probably
English).
clock on your
remote to appear: showing on the
12 hour (like 2:30 screen. Press
PM) or 24 hour
Finish when
you’re done.
(14:30).
Screens in the wrong language?
You can change the setting by pressing the
Make a mistake?
You can change the setting by pressing the
back one or more screens in the setup routine.
(Home/Back) key to go
(Home/Back) key to go back one or
more screens in the setup routine.
Out of the Box
5
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Remote Device Setup
4
The Xsight™ Touch lets you set up your devices in seconds, right on the remote, with a built-in library of codes for
the most popular models of the most common home theater devices: DVD players, plasma and LCD HDTVs, and
much more.
After the tutorial, press “Let’s begin!”
After the remote’s tutorial screens, the remote asks if
you’re ready to get set up. Press Let’s begin!
Note: If you quit setup after setting
the time, you can access device setup
through the Settings menu on the
remote. In the Home screen, choose
Settings (it’s on the second page
of the Home screen—use the slider
bar to access it). Then press Device
Setup and Add Device, and follow the
instructions.
Ready to get set up?
Let’s begin!
Press “Remote.”
Note: On-remote device setup
Just want to add
devices now? You can
do so from your
remote. For anything
more advanced,
choose PC.
supports the most popular models
of the most popular brands. The EZ-
RC™ Remote Control Setup Wizard
handles everything else! So, if you
don’t see your brands listed in the on-
remote device setup—or if the remote
isn’t controlling all of your device’s
functions—you can set up your device
using your PC and the EZ-RC™ Remote
Control Setup Wizard. See the sections
that follow for information.
The remote asks if you want to set up devices on your
remote or using your PC. To use the on-remote setup,
press Remote.
Remote
PC
To begin setting up your first device, press Add Device on
the screen that follows.
6
Out of the Box
Download from Www.Somanuals.com. All Manuals Search And Download.
Choose the kind of device you want to set up.
Use the slider bar to go through the pages of devices.
When you see the kind of device you want to set up, press
the on-screen key for that device (TV, DVD, etc.).
Don’t see your device?
What is it?
TV
Try the EZ-RC™ Remote Control Setup Wizard!
On-remote device setup supports the most
popular models of the most popular brands.
The EZ-RC™ Remote Control Setup Wizard
handles everything else! So, if you don’t see
your device listed in the on-remote device
setup, you can set it up using your PC and the
EZ-RC™ Remote Control Setup Wizard. See
the sections that follow for information.
DVD
Satellite Box
Choose your device’s brand.
Select Brand
Panasonic
Use the slider bar to go through the pages of brands for
this device. When you see your brand, press its on-screen
key.
Don’t see your brand?
Try the EZ-RC™ Remote Control Setup Wizard!
On-remote device setup supports the most
popular models of the most popular brands.
The EZ-RC™ Remote Control Setup Wizard
handles everything else! So, if you don’t see
your brand listed in the on-remote device
setup, you can set it up using your PC and the
EZ-RC™ Remote Control Setup Wizard. See
the sections that follow for information.
Philips
Sony
Test your codes.
Next, we’ll make sure
we’ve got the right
codes. Turn on your
Sony
and point the remote
towards it.
Now the remote will take you through steps to test which
of the codes in the remote’s library is the best one to use
with your device. Turn on your device manually, point the
remote toward it, and press Begin Test.
Begin Test
To go back a screen:
Press the
(Home/Back) key to go back one or more screens in the
setup routine.
Out of the Box
7
Download from Www.Somanuals.com. All Manuals Search And Download.
First, test the
(Power) button on the remote.
Sony
TV
Testing code
1/12.
Test the Power
button. If it works,
test other keys.
Can’t find a code that works
your device (or one that does
everything you want it to do)?
Use the EZ-RC™ Remote Control Setup
Wizard! The setup wizard lets you enter
your device’s model number to find
exactly the right code for your device.
If your device turns off, try several other keys on
your remote to make sure this code gives you all the
functionality you want for this device. For example, if
you’re testing a code for your DVD player, you definitely
want the transport keys to work (play, stop, fast forward,
etc.). So you should test at least these keys for a DVD
player.
Works!
Next
If you find a code that does most of what
you want to do with a device, you can
learn additional keys from your original
remote through the remote’s Settings
menu (see the remote’s user manual for
instructions).
If the other keys on the remote work for your device, press
Works! If the other keys don’t work, press Next to try the
next code in the library.
Congratulations!
You’ve successfully
set up your
More devices?
Tips for setting up devices
• Always point the remote directly at the
device you’re trying to control.
Once you’ve found a code that works for your device, the
remote asks if you want to add another device. Press Yes
to add another device (or press No if you’re done for now).
Sony
TV.
Add another device?
• It may take a few seconds for your device
to respond to a command (especially on or
off). Be patient between presses—give your
device a few seconds to respond.
No
Yes
• Some brands of devices do not use a POWER
key to turn the device on or off. Instead they
use separate POWER ON and POWER OFF
keys. Check your devices’ original remotes
to see if any of them have these separate
power keys. If they do, use other keys
(volume, channel, or number keys) to test
codes in this step.
Set master volume (for devices with audio control)
If you’ve set up an audio receiver, the remote asks you
if you want to set a device as the Master Volume control
once you’ve finished setting up devices on your remote.
Do you want to set
your volume to
control one device
(e.g. your amp or TV)
at all times?
You should answer Yes only if you always change volume
using the same device for all your devices.
No
Yes
8
Out of the Box
Download from Www.Somanuals.com. All Manuals Search And Download.
If you sometimes use other devices to change volume, answer No in this
screen—you’ll have a chance to set up master volume for specific activities (like
when you’re watching a movie) later.
How to see what you’ve set up
so far
If you’re not sure what devices you’ve
already added to the remote, press the
(Devices) shortcut key on the remote at
the beginning of device setup (in the “What
is it?” or “Select brand” screens). Use the
slider bar to browse through the devices
you’ve already programmed. Then press
Using the remote
Now you’re ready to start using the Xsight™
Touch with your home entertainment devices.
the
(Home/Back) key to go to the Home
screen, use the slider bar to see the second
page, press Settings, then Device Setup, and
finally Add Device to set up more devices.
Home
screen
The home screen of the Xsight™ Touch is your
gateway to the remote’s full functionality. The
home screen has the following options:
Slider
bar
Shortcut
keys
•
•
•
•
Favorites
Activities
Devices
Settings (on the second page of the
screen—use the slider bar below the
screen to access this option)
Hard
keys
The slider bar lets you move between pages and
menus on the remote screen. Slide your finger to
the left or right to move.
The shortcut keys access the home screen
options directly.
The hard keys on the bottom of the remote work
much like the keys on your original remotes.
Out of the Box
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the EZ-RC™ Remote Control Setup Wizard
Quick Look:
> System Requirements
> Install the EZ-RC™ Remote Control Setup Wizard
> Launch the EZ-RC™ Remote Control Setup Wizard
> Sign in
What you’ll be doing by the end of this section:
Using the EZ-RC™ Remote Control Setup Wizard to set up
your remote’s advanced features.
> Connect your remote
IMPORTANT NOTE FOR WINDOWS XP USERS:
You must have Service Pack 3 and .Net 3.5
To find out what service pack version you have:
Make sure your PC satisfies system
requirements
1
Minimum hardware requirements
• USB 2.0 port
1. Right click on My Computer on your
PC desktop.
2.Choose Properties from the drop-
down menu.
• CD-Rom drive
• Internet connection
3.In the General Tab, the Service Pack is
listed under System.
Minimum software requirements
• Windows XP, Windows Vista, or Windows 7 (does
not support Windows 2000)
To update to SP3:
1. Insert the CD that came with the remote. The CD goes automatically to
Microsoft update site if you have a working internet connection.
• Internet Explorer 6.0 or later (does not support
Firefox or Safari)
2. At the Microsoft website, click Express to begin the updating process. The
Microsoft site checks your computer (this takes about 5-10 minutes).
3. The Microsoft site will tell you which updates you need to install. Follow
the Microsoft site and installation wizard instructions to download and
install updates.
How long will this take? (depending on connection speed)
If you have SP1: 1 hour to update to SP2; an additional 30 mins for SP3
If you have SP2: 30 mins for SP3
4. Close all internet browser windows and continue with EZ-RC install.
10
Installing the EZ-RC™ Remote Control Wizard
Download from Www.Somanuals.com. All Manuals Search And Download.
Install the EZ-RC™ Remote Control Setup Wizard
2
Insert the CD-ROM that came with your Xsight™ Touch into your PC. The EZ-
RC™ installation program should start automatically after a minute or so.
Follow the CD-ROM’s on-screen instructions to install the EZ-RC™ Remote
Control Setup Wizard.
What if my CD doesn’t start installation automatically?
1. Open the CD and double-click on the icon shown here.
2. If you have Windows XP and need Service Pack 3, see the Important Note for
Windows XP users on the previous page (Vista users do not need this kind of update).
Launch the EZ-RC™ Remote Control Setup Wizard.
3
Double-click on the EZ-RC™ Remote Control Setup Wizard icon on your PC
desktop.
Note: Proxy servers, like those used in many business networks, may affect the performance of
the EZ-RC™ Remote Control Setup Wizard. For best results, use the EZ-RC™ Remote Control Setup
Wizard with a direct internet connection (for example, your home connection).
Sign into the EZ-RC™ Remote Control Setup Wizard.
4
The first time you access the EZ-RC™ Remote Control Setup Wizard, you will
need to register so that you can save your remote’s settings. Click Create New
Account.
Once you’ve created your account, you can use your username and password to
sign in.
Need help setting up this remote?
Please call our help line toll-free at 1-800-276-0509.
Installing the EZ-RC™ Remote Control Wizard
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect your remote when prompted
5
Use the USB cable that came with your
remote to connect it to a USB port on your
computer.
How do I know if the remote’s connected?
Look for the green arrow icon in your PC’s status bar.
If you see this error message...
You need to change your ActiveX settings in
Internet Explorer for the EZ-RC™ Remote Control
Setup Wizard to work.
If you see a progress bar in
the corner of the screen...
To change settings ActiveX settings:
It means your
remote’s firmware
is being updated.
1. Click OK in the “Missing necessary software...”
dialog box.
Don’t disconnect
the remote! The
2. Locate the yellow warning bar just above the AR remote control setup wizard page
(shown below).
Xsight™ Touch
is constantly being updated and
improved, to get the latest codes
and provide the most advanced
functionality available.
3. Click where it says “click here” on the yellow warning bar to change the Active X setting.
4. Click the Connect button again at the bottom of the screen.
Why ActiveX controls are necessary
The EZ-RC™ Remote Control Setup Wizard uses ActiveX controls to give you an
enhanced user interface, with straightforward access to the remote’s advanced
features and seamless integration with the remote itself.
12
Installing the EZ-RC™ Remote Control Wizard
Download from Www.Somanuals.com. All Manuals Search And Download.
In the first setup screen after you’ve connected your remote, check the Upload
and edit a setup from your remote option.
Then confirm that you want to proceed. This tells the EZ-RC™ Remote Control
Setup Wizard that you want to save the settings you created during the on-
remote setup.
If you’re uploading new device information (like the new devices you set up
in the on-remote setup), the final screen before the EZ-RC™ Remote Control
Setup Wizard Main Menu asks for the model numbers of these devices.
For the best experience with your Xsight™ Touch remote, we recommend
you add this information. This will allow the setup wizard to give you the full
functionality for your exact models.
Need help setting up this remote?
Please call our help line toll-free at 1-800-276-0509.
Installing the EZ-RC™ Remote Control Wizard
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Activities
Quick Look:
What you’ll be doing by the end of this section:
Controlling your entire home entertainment system with
one touch.
> Set up the Hello activity (all on)
> Set up the Good Night activity (all off)
> Set up a Watch Movie activity
> Set up a Watch Satellite or Cable activity
Set up your first activities
Activities give you one-touch control over your entire home theater...watch movies, your favorite TV shows, listen to
music, all with the touch of a button. This chapter gets you started. This is how it works:
• a Hello activity turns on all your home theater devices automatically when you’re ready to start enjoying them
• customized activities to Watch Movies, Watch Satellite or Cable, Listen to Music, etc. let you switch seamlessly
between your favorite TV shows and DVDs
• when you’re finished enjoying your home theater, a Good Night activity turns everything off for you
Setting up the Hello activity (all on)
The Hello activity is a very important first step to get the most from activities on your Xsight™ Touch. Different devices
require different amounts of time to warm up before they can be used, which can interfere with the functioning of multi-
step activities like Watch Movie, which you’ll set up later in this section. The Hello activity makes sure everything is on
and ready for action when you want to use it.
14
Activities
Download from Www.Somanuals.com. All Manuals Search And Download.
Add a Hello activity.
1
In the main menu, click Activities and select Add an activity from the
submenu.
Choose Smart Wizard
Then click the
button to continue.
A screen appears showing you the steps you’ll go through to set up the activity
using the Smart Wizard. Click the
continue.
button at the bottom of the screen to
Why Smart Wizard?
There are two ways to set up Activities: the Smart Wizard and the Advanced Wizard. The Smart
Wizard is much easier for simple activities, like turning everything on or off. The Advanced
Wizard is better for more complicated tasks.
Choose the activity you want to set up (Hello)
The next screen shows you a list of activities you can set up. Choose Hello.
Click the
button at the bottom of the screen to continue.
Name the activity
The next screen lets you customize the name of this activity. Type in a new
name for this activity or leave it as “Hello”. Then click the
bottom of the screen to continue.
button at the
Activities
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure the Hello activity for your devices.
2
Set the power on commands
Once you’ve given the Hello activity the name you want (or left it as “Hello”),
the next Wizard screen lets you set how each of your devices are powered on.
Use the pull-down menu for each device to set that device’s power-on
command. The options are:
None Use this option if you want to leave a device out of the Hello activity
(for example, if the device is in another room).
On Use this option if the remote that originally came with this device has
separate ON and OFF keys (not a single POWER key).
Off Since this option turns your devices off, we won’t use it now.
Toggle Use this option if the remote that originally came with this device
has a single POWER (or ON/OFF) key.
Once you’ve set the power-on command for each of your devices click the
button at the bottom of the screen to continue.
Set volume/channel/playback controls
The next setup screen for the Hello activity lets you set which devices you
use to change volume and channels, and control playback in your home
entertainment system.
Once you’ve set the devices you want to control volume, channel selection,
and playback, click the
continue.
button at the bottom of the screen to
After you click Next, the EZ-RC™ Remote Control Setup
Wizard prepares your remote to test the activity with
your home theater system.
16
Activities
Download from Www.Somanuals.com. All Manuals Search And Download.
Test the Hello activity with your devices.
3
Once your remote is ready to test, the screen to the right appears.
Carefully disconnect the remote from your PC. The remote screens guide you
through testing this activity.
12:35
Read about the test
The first screen gives you some information about the test. Use the slider to go
to the next screen.
Press the power
button on the next
page to turn off or
on your devices in
this activity.
IMPORTANT: Make sure all your devices are off before you start.
12:35
12:35
Test individual power commands
The second screen lets you test the power command you set for each device.
Press the on-screen remote button for each device to see if it turns that device
on. (If it does, make sure you turn it back off!) Only the first three devices are
shown on this page. Use the slider to test the rest of your devices.
Sony TV
Harmon/Kardon
Audio
Onkyo DVD
IMPORTANT: If you notice one of your devices does not respond to the power
command, make a note—you will need to change the power command you give
to that device.
DirecTV Satellite Box
OK
Under your last device, there’s is an on-screen OK button. Press OK to continue
with the test.
Activities
17
Download from Www.Somanuals.com. All Manuals Search And Download.
12:35
Test the entire activity
Through out the
The next screen lets you test the Hello activity with your entire system.
IMPORTANT: Make sure all your devices are off before you start. Also make
sure your remote is pointed directly at your home theater. Then press Begin
Test. The screen says “Sending” while the remote is sending the power
commands.
Activity test, point
the remote toward
your devices.
Begin Test
12:35
Did it work?
Reconnect USB to
verify Activity.
The next screen asks if the activity worked—if your devices turned on.
If it worked: Reconnect the remote to your PC (see the heading below).
If it didn’t work: Make sure your remote is pointed directly at your home
entertainment devices and that there’s nothing obstructing path, then press
Test again button. IMPORTANT: Make sure all your devices are off before
you start. Test each device by pressing its on-screen soft key. Then press OK
to proceed and Begin test to test the entire activity again.
Test again
Try several times with the remote in different positions. If it still doesn’t work,
go ahead and reconnect to PC to troubleshoot and correct the activity.
Reconnect the remote to your PC
Once you’ve reconnected the remote, press Continue on the EZ-RC™ Remote
Control Setup Wizard screen.
How do I know the remote’s connected?
Look for the green arrow icon in your PC’s status bar.
18
Activities
Download from Www.Somanuals.com. All Manuals Search And Download.
Finish up the activity.
4
If the activity worked with your remote, you’re just a step from the finish. If the activity did not work as you thought
it should, you can use the EZ-RC™ Remote Control Setup Wizard to make adjustments or troubleshoot.
Select Yes if the activity worked.
Select Make adjustments if you know what needs to be changed (for
example, if you noticed one of your devices didn’t turn on).
Select Troubleshoot if you’re not sure what needs to be changed.
Select Save activity and modify later if the activity didn’t work as you
wanted it to, but you would rather come back to it and troubleshoot or
modify later.
Press Next when you’ve made your selection.
The final screen confirms that you’ve set up your first activity, Hello.
Click Yes to set up the next activity, “Good Night.”
If you add devices later...
Don’t forget to come back to your Hello activity and add their power commands as well to
turn them on!
Need help setting up this remote?
Please call our help line toll-free at 1-800-276-0509.
Activities
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the Good Night activity (all off)
Add a Good Night activity.
1
Choose Smart Wizard.
Then click the Next button to continue.
A screen appears showing you the steps you’ll go through to set up the activity
using the Smart Wizard. Click the Next button to continue.
If you’re re-accessing the EZ-RC™ Remote Control Setup Wizard, go to the Main
Menu and click Activities. A submenu appears next to the menu button. Select
Add an Activity.
Then continue with the steps that follow to set up the Good Night activity.
Choose the activity you want to set up (Good Night)
The next screen shows you a list of activities you can set up. Choose Good
Night. Press the Next button to continue.
Name the activity
The next screen lets you customize the name of this activity. Type in a new
name for this activity or leave it as “Good Night”. Then click Next.
Why Smart Wizard?
There are two ways to set up Activities: the Smart Wizard and the Advanced Wizard. The Smart
Wizard is much easier for simple activities, like turning everything on or off. The Advanced
Wizard is better for more complicated tasks.
20
Activities
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure the Good Night activity for your devices.
2
Set the power off commands
Once you’ve given the Good Night activity the name you want (or left it as
“Good Night”), the next Wizard screen lets you set how each of your devices
are powered off.
Use the pull-down menu for each device to set that device’s power-off
command. The options are:
None Use this option if you want to leave a device out of the Good Night
activity (for example, if the device is in another room).
On Since this option turns your devices on, we won’t use it now.
Off Use this option if the remote that originally came with this device has
separate ON and OFF keys (not a single POWER key).
Toggle Use this option if the remote that originally came with this device
has a single POWER (or ON/OFF) key.
Once you’ve set the power-off command for each of your devices click Next to
continue.
After you click Next, the EZ-RC™ Remote Control Setup
Wizard prepares your remote to test the activity with your
home theater system.
Activities
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Test the Good Night activity with your devices.
3
Once your remote is ready to test, the screen to the right appears.
Carefully disconnect the remote from your PC.
The remote screens guide you through testing this activity.
12:35
Read about the test
Press the power
The first screen gives you some information about the test. Use the slider to go
to the next screen.
button on the next
page to turn off or
on your devices in
this activity.
IMPORTANT: Make sure all your devices are on before you start.
Test individual power commands
The second screen lets you test the power command you set for each
device. Press the on-screen remote button for each device to see if it turns
that device off. (If it does, make sure you turn it back on!) Only the first
three devices are shown on this page. Use the slider to test the rest of your
devices.
12:35
12:35
Sony TV
Harmon/Kardon
Audio
Onkyo DVD
IMPORTANT: If you notice one of your devices does not respond to the power
command, make a note—you will need to change the power command you give to
that device.
DirecTV Satellite Box
OK
Under your last device, there’s is an on-screen OK button. Press OK to
continue with the test.
22
Activities
Download from Www.Somanuals.com. All Manuals Search And Download.
12:35
Test the entire activity
Through out the
The next screen lets you test the Good Night activity with your entire system.
IMPORTANT: Make sure all your devices are off before you start. Also make
sure your remote is pointed directly at your home theater. Then press Begin
Test. The screen says “Sending” while the remote is sending the power
commands.
Activity test, point
the remote toward
your devices.
Begin Test
12:35
Did it work?
Reconnect USB to
verify Activity.
The next screen asks if the activity worked—if your devices turned off.
If it worked: Reconnect the remote to your PC (see the heading below).
If it didn’t work: Make sure your remote is pointed directly at your home
entertainment devices and that there’s nothing obstructing path, then press
Test again button. IMPORTANT: Make sure all your devices are off before
you start. Test each device by pressing its on-screen soft key. Then press OK
to proceed and Begin test to test the entire activity again.
Test again
Try several times with the remote in different positions. If it still doesn’t work,
go ahead and reconnect to PC to troubleshoot and correct the activity.
Reconnect the remote to your PC
Once you’ve reconnected the remote, press Continue on the EZ-RC™ Remote
Control Setup Wizard screen.
How do I know the remote’s connected?
Look for the green arrow icon in your PC’s status bar.
Activities
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Finish up the activity.
4
If the activity worked with your remote, you’re just a step from the finish. If the
activity did not work as you thought it should, you can use EZ-RC™ to make
adjustments or troubleshoot.
Select Yes if the activity worked.
Select Make adjustments if you know what needs to be changed (for
example, if you noticed one of your devices didn’t turn on).
Select Troubleshoot if you’re not sure what needs to be changed.
Select Save activity and modify later if the activity didn’t work as you
wanted it to, but you would rather come back to it and troubleshoot or
modify later.
Press Next when you’ve made your selection.
The final screen confirms that you’ve set up your second activity, Good Night.
Click Yes to set up your next activity (like Watch Movie or Watch satellite or
cable).
If you add devices later...
Don’t forget to come back to your Good Night activity and add their power commands as
well to turn them off!
24
Activities
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up a Watch Movie activity
The next activities, Watch Movie and Watch Satellite (or Watch Cable), are different from the Hello and Good Night
activities. For these activities, you will use the Advanced Wizard. The Advanced Wizard gives you more options to
customize these activities to fit exactly the way your home theater is set up. But you should gather a little information
about your devices before setting up the device in the EZ-RC™ Remote Control Setup Wizard.
Write down which devices you use to Watch Movies.
1
Look at the following example setup for “Watch Movie”, then fill in the information for this activity in your home theater.
What device do you use to...
What device do you use to...
Control Control
Example
setup
YOUR
setup
Control
Control
Watch video?
Watch video?
volume?
playback?
volume? playback?
Watch Movie
A/V receiver
TV
DVD player
Watch Movie
Write down how you access those inputs with your original remotes.
2
Look at the following example setup for a “Watch Movie” activity. Then fill in the information for the activity in your
home theater.
Example
setup
YOUR
setup
Keypresses to watch/listen to a
movie
Keypresses to watch/listen to a
movie
A/V receiver
TV
HDMI1 key
INPUT, down arrow, ENTER
IMPORTANT: If you always use the same input on any of your devices, you don’t need to include this device in the
Watch Movie activity—it should already be on the correct input.
Activities
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Add a new activity in the EZ-RC™ Remote Control Setup Wizard.
3
Choose Advanced Wizard
For the Watch Movie activity, choose the Advanced Wizard and click the Next
button to continue.
A screen appears showing you the steps you’ll go through to set up the activity
using the Advanced Wizard. Click the Next button to continue.
Why Advanced Wizard?
The Advanced Wizard is better for Watch and Listen activities because it is more flexible,
allowing for the wide variety of setups possible with today’s advanced audio/video systems.
If you’re re-accessing the EZ-RC™ Remote Control Setup Wizard, go to the
Main Menu and click Activities. Select Add an Activity from the submenu that
appears.
Then continue with the steps that follow to set up the Watch Movie activity.
Choose the activity you want to set up (Watch Movie)
The next screen shows you a list of activities you can set up. Choose Watch
Movie. Press the Next button to continue.
Name the activity
The next screen lets you customize the name of this activity. Type in a new
name for this activity or leave it as “Watch Movie”. Then click Next.
26
Activities
Download from Www.Somanuals.com. All Manuals Search And Download.
Build the Watch Movie activity for your devices.
4
Once you’ve given the Watch Movie activity the name you want (or left it as
“Watch Movie”), the next Wizard screen asks if you want to build the sequence
of commands to configure your home entertainment system to watch a movie.
Select Yes. Let me build the IR sequence. and click Next.
In the screen that follows, enter the series of keypresses you use to watch a
movie on your entertainment system.
Use the chart for YOUR setup on page 25 to add the keypresses.
For “Watch Movie” you don’t need to turn anything on.
The Hello activity does that for you. All you need to worry about is finding the right input on
your devices.
To enter each command into the sequence:
1. Use the pull-down menu on the right side of the screen to choose the device
you want to send the command to.
Activities
27
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Scroll through the commands available for this device. (The list also includes
extended functions that the Xsight™ Touch will create if needed.) Find the
key(s) that you want to enter for that device.
3. When you see the key command you want to use, highlight it and press the
on-screen arrow button to include it in the list of commands for this activity.
Don’t see the key command you want?
First, make sure you’ve selected the correct device from the drop-down menu. Then, double
check your original remote and make sure you’ve written down the key name correctly. If you
still don’t see the key command you’re looking for, you can have the Xsight™ Touch learn this
key from your original remote.
If you see this screen...
To learn a new key:
1. Click Cancel in the EZ-RC™ Remote Control Setup Wizard screen. Save the activity as you’ve
built it so far.
2. Click Download to Remote in the Main Menu. Once the download has finished, disconnect
the remote from your PC.
3. Follow the instructions for learning the key from the original remote on the Xsight™ Touch.
These instructions are in the Owners Manual on the CD-Rom that came with your Xsight™
Touch.
Don’t worry—the Xsight™ Touch will create
this soft key for you. Just click Yes and
continue building your activity.
4. Once you’ve finished learning the specific input key, reconnect the Xsight™ Touch to your PC
and launch the EZ-RC™ Remote Control Setup Wizard again.
5. In the EZ-RC™ Remote Control Setup Wizard main menu, click Activities and choose Modify
Activity from the submenu that appears.
6. Choose the Watch Movie activity, then The Key Command Sequence. Then follow the rest
of the instructions starting on the previous page of this manual.
4. Repeat for each key command you want to add to your activity.
To move a command in the sequence: Click the command in the list. Then
click one of the arrows that appear (up or down) to move the command.
To delete a command from the sequence: Click the X icon next to the icon
in the sequence. Answer Yes to the dialog box that appears to delete the
command from the sequence.
28
Activities
Download from Www.Somanuals.com. All Manuals Search And Download.
To change the timing between commands (sometimes useful if a device
needs to respond to one command before it can respond to another): click
the clock icon in the second line of the command and use the arrows to
adjust the number of seconds to wait before giving the next command.
5. Once you’ve built the activity to your satisfaction, click Next to continue.
Set the volume/channel/transport controls
The final setup screen for the Watch Movie activity lets you set which devices
you use to change volume and channels, and control playback when you’re
watching a movie.
To change which device a group of keys
controls, click the device listed to display the
drop-down menu and select the device you
want this group of keys to control.
Once you’ve set the devices you want to control volume, channel selection, and
playback, click Next.
The final screen confirms that you’ve set up a Watch Movie activity.
Click Yes to set up another activity.
Activities
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up a Watch Satellite or Watch Cable activity
Write down which devices you use to Watch Satellite or Cable.
1
Look at the following example setup for “Watch Satellite”, then fill in the information for this activity in your home
theater.
What device do you use to...
What device do you use to...
Control Change
Example
setup
YOUR
setup
Control
volume?
Change
channels?
Watch video?
Watch video?
volume? channels?
Watch Satellite A/V receiver
TV
Satellite rcvr
Watch Satellite
Write down how you access those inputs with your original remotes.
2
Look at the following example setup for a “Watch Satellite” activity. Then fill in the information for the activity in
your home theater.
Example
setup
YOUR
setup
Keypresses to watch/listen to
satellite/cable
Keypresses to watch/listen to
satellite/cable
A/V receiver
TV
HDMI2 key
INPUT, down arrow, ENTER
IMPORTANT: If you always use the same input on any of your devices, you don’t need to include this device in the
Watch Satellite or Watch Cable activity—it should already be on the correct input.
30
Activities
Download from Www.Somanuals.com. All Manuals Search And Download.
Add a new activity in the EZ-RC™ Remote Control Setup Wizard.
3
Choose Advanced Wizard
For the Watch Satellite or Watch Cable activity, choose the Advanced Wizard
and click the Next button to continue.
A screen appears showing you the steps you’ll go through to set up the activity
using the Advanced Wizard. Click the Next button to continue.
Choose the activity you want to set up (Watch Satellite or Watch Cable)
The next screen shows you a list of activities you can set up. Choose Watch
Satellite or Watch Cable. Press the Next button to continue.
Name the activity
The next screen lets you customize the name of this activity. Type in a new
name for this activity or leave it as “Watch Satellite” or “Watch Cable”. Then
click Next.
Activities
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Build the Watch Satellite or Watch Cable activity for your devices.
4
Once you’ve given this activity the name you want (or left it as-is), the next
Wizard screen asks if you want to build the sequence of commands to configure
your home entertainment system to watch a movie. Select Yes and click Next.
In the screen that follows, enter the series of keypresses you use to watch a
movie on your entertainment system.
Use the chart for YOUR setup on page 30 to add the keypresses.
For this activity, you don’t need to turn anything on.
The Hello activity does that for you. All you need to worry about is finding the right input on
your devices.
To enter each command into the sequence:
1. Use the pull-down menu on the right side of the screen to choose the device
you want to send the command to.
32
Activities
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Scroll through the commands available for this device. (The list also includes
extended functions that the Xsight™ Touch will create if needed.) Find the
key(s) that you want to enter for that device.
3. When you see a key command you want to use, highlight it and press the
on-screen arrow button to include it in the list of commands for this activity.
Don’t see the key command you want?
See the “Don’t see the key command you want?” box on page 28 for Troubleshooting suggestions.
If you see this screen...
Don’t worry—the Xsight™ Touch will create this soft key for
you. Just click Yes and continue building your activity.
4. Repeat for each key command you want to add to your activity.
To move a command in the sequence: Click and hold on the arrow next
to the command in the list. Drag the command where you want it in the
sequence.
To delete a command from the sequence: Click the X icon next to the icon
in the sequence. Answer Yes to the dialog box that appears to delete the
command from the sequence.
To change the timing between commands (sometimes useful if a device
needs to respond to one command before it can respond to another): click
the clock icon in the second line of the command and choose from the drop-
down menu to select the number of seconds to wait before giving the next
command.
5. Once you’ve built the activity to your satisfaction, click Next to continue.
Activities
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Set the volume/channel/transport controls
The final setup screen for the Watch Satellite or Watch Cable activity lets
you set which devices you use to change volume and channels, and control
playback when you’re watching satellite or cable.
To change which device a group of keys controls, click the device listed to
display the drop-down menu and select the device you want this group of keys
to control.
Once you’ve set the devices you want to control volume, channel selection, and
playback, click Next.
The final screen confirms that you’ve set up this activity. Click Yes to set up
another activity or No to go to the Main Menu.
IMPORTANT: Don’t forget to download your activities to your remote.
When you’ve finished customizing your remote using the EZ-RC™ Remote Control Setup Wizard,
go to the main menu and click Download to Remote to save your settings to the remote itself.
The next screen asks if you’d like to review your settings.
Choose Yes if you want to see the complete list of activities, favorites, devices, and other
settings you’ve saved using the EZ-RC™ Remote Control Setup Wizard. Choose No to download
without reviewing the settings.
When all the information has been downloaded to your remote, a confirmation screen appears.
Carefully disconnect the remote from your PC to start using it.
34
Activities
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your activities
1. Press the
(Activities) shortcut key.
2. When you start using your home theater—before you turn anything on—choose the Hello
Hello
activity.
12:35
12:35
How do I know when an
activity has finished?
When you see soft keys for
one of your devices on the
remote screen, the remote
has finished sending the
activity’s commands and is
ready to do something else.
Need help after the
Hello activity has
finished?
Press Assist. Then press
Power On/Off to turn devices
on manually. Use the slider to
access more devices.
Hello
Hello
Assist
No sound
Back
Service
No picture
PIP
PIP Swap
Power On/Off
3. Choose the home entertainment activity you want to perform (for example, Watch Movie).
Watch Movie
Need help after a Watch.. or Listen... activity has finished?
2:35
2:35
12:35
A
B
C
Press Assist.
A
B
C
Watch Movie
Watch Movie Assist
Watch Movie Assist
Press No Sound or No Picture.
Press the on-screen input key until you
see or hear the correct signal.
Press the button
below until you
hear the correct
audio.
Assist
No sound
No picture
Press the
source you want. Then press the
to go to the soft keys. To go to the home
menu, press and hold the key.
key when you see or hear the
Subtitle
Skip+
key again
Aspect
(Zoom)
Skip–
Power On/Off
HDMI1
Activities
35
Download from Www.Somanuals.com. All Manuals Search And Download.
What if Assist doesn’t work?
If the Assist screens are not helping you find the correct inputs on your devices, check the following:
• Is the wrong device changing inputs?
Make sure the input key you see on the No Sound/No Picture screen is the correct one for the device you’re trying to
change. If it isn’t, press the
key and try the other Assist option (for example, No Sound if you chose No Picture first)
If that option is still changing inputs on the wrong device, connect the remote to your PC and launch the EZ-RC™
Remote Control Setup Wizard. In the main menu, choose Activities, Modify an Activity, the activity you want to modify,
and Key Command Sequence. In the Key Command Sequence, check that you’ve chosen the correct input commands
for each device.
• Is the device going to the wrong input or not changing inputs at all?
Make sure the input key you see on the No Sound/No Picture screen matches the device input you’re trying to access. If
it doesn’t, you’ll need to change to the correct command in the EZ-RC™ Remote Control Setup Wizard.
Connect the remote to your PC and launch the EZ-RC™ Remote Control Setup Wizard. In the main menu, choose
Activities, Modify an Activity, the activity you want to modify, and Key Command Sequence. In the Key Command
Sequence, check that you’ve chosen the correct input commands for each device.
To do another activity, press the
shortcut key.
key.
To go to the home menu, press and hold the
4. When you’re finished with your home theater, press the
shortcut key and choose the Good
Good Night
Night activity.
Need help setting up this remote?
Please call our help line toll-free at 1-800-276-0509.
36
Activities
Download from Www.Somanuals.com. All Manuals Search And Download.
Favorites and Profiles
Quick Look:
What you’ll be doing by the end of this section:
Using the Xsight™ Touch your way, all at the touch of a
button.
> How to make the Xsight™ Touch remote Yours
> Create a Family Favorite Channels list
> Create individual Profiles for each family member
How to make this remote all yours
The Xsight™ Touch has powerful customization tools to make this remote truly your own. Favorites gives you access to
your Favorite Channels and settings for the whole family. You can choose up to 72 favorite channels. Profiles lets you
group your favorite channels and remote settings for each family member or type of programming.
To use Favorites and Profiles, first build your list of favorite channels for the entire family—this list includes everything:
all of Mom’s favorites, all of Dad’s...anything you plan to include in your profiles. Then you can choose from this list to
create the individual profiles. But remember: a channel must be in your favorites in order to be in a profile.
Creating your family favorites
The first step is creating a list of favorite channels for the
entire family. Once you’ve created this list, you can create
lists for separate profiles.
If you’re not already signed in:
1. Double-click the EZ-RC™ Remote Control Setup Wizard icon on
your PC desktop and sign in.
2. Connect your remote and click Continue.
3. Select Edit an existing setup you’ve saved here before and click
Start. (If you’ve made changes on your remote, press Upload and
edit…) Continue with the rest of the directions in this section.
Favorites & Profiles
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up your favorites.
1
In the main menu, click Favorites and select Set up Favorites from the
Favorites submenu.
The next screen shows you the steps you’ll complete to set up your favorites.
Press Next to continue.
Set the device you use to change channels
If you subscribe to a satellite programming service, for example, you probably
use your satellite box to change channels, not your TV. Choose the option that
works for your home theater, then click Next.
Note: The Favorites feature works with a single source, like your cable box or satellite receiver.
It will not work with a second source (for example, a satellite receiver and over-the-air
programming on your TV).
Set how many digits your channels have
For example, if your channels go up to 999, then you should select 3 digits. If
the channels go to up to 99, you should select 2 digits. Choose the option that
works for your home theater, then click Next.
Note: If you plan to include digital sub-channels in your Favorites list (like 59.1), choose 4 digits.
Then choose Enter or Select/OK in the screen that follows if your system supports either of
these options.
Set how you finish entering a channel number
Next you tell the setup wizard if you usually press Enter or OK on your remote
to enter a channel. Choose the option that works for your home theater, then
click Next.
Now the EZ-RC™ Remote Control Setup Wizard starts loading the channel
icons. This might take a few minutes, depending on the speed of your internet
connection.
38
Favorites & Profiles
Download from Www.Somanuals.com. All Manuals Search And Download.
Choose your favorite channels.
2
Select a channel
Click the scroll bar to find a channel you want to add to your favorites. The
channels are listed in alphabetical order. Highlight a channel you want to add,
and click the arrow that appears to the left of the channel to add it to your
favorites.
If you don’t see your channel listed...
You can add it manually by choosing Other at the top of the list.
You can then choose to display this channel by a text label or search the
EZ-RC™ Remote Control Setup Wizard library for a channel icon.
To use a text label, simply type in the text you want to use and proceed
to the rest of the directions that follow to enter the channel number.
To use an icon from the library (or to choose your own), select Show
Channel Icon, then click the … button.
Scroll through the icons available in the collection and highlight the
logo you want. If you don’t see the icon you want, you can add your own
by clicking the Browse button and finding the artwork for the icon on
your PC.
Press OK when you’ve selected the icon you want.
The channel icon appears in the replica of the remote screen. Continue
with the instructions that follow to add the channel number for this
channel.
Favorites & Profiles
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Type in the channel number
When the channel icon or label appears on the replica remote screen, type in
the number for the channel in your programming.
Add the next channel
Click the next space in the replica remote screen to add another channel to
your favorites. Then follow the same procedure you followed for adding the
first channel.
When you fill up a page...
Click the + icon below the replica remote screen to add another page. Then click
the first space in that page to start filling it with channels.
Use the left and right arrow buttons below the replica remote screen to move
through multiple pages of your favorites.
Check your channels
When you’ve added all your favorite channels, check the pages you’ve compiled
to make sure you’ve added channel numbers for all the channels—otherwise the
remote won’t be able to tune directly to this channel. A
those channels missing channel numbers.
icon appears next to
To move a channel in the list, click on the channel’s logo, then click one of the
arrows that appear to change the channel’s position on the screen.
Finish the list
When you’ve made sure all the channel numbers are entered, click the Next
button to proceed to the final step of creating your Favorites list. The setup
wizard takes a few moments to prepare the next screen.
40
Favorites & Profiles
Download from Www.Somanuals.com. All Manuals Search And Download.
Choose the devices controlled by each section of the remote.
3
In the final step in creating your Favorite channels list, you set what different
groups of keys control by default when you’re using your favorite channel list.
Set this screen for the way you usually use a remote while watching your favorite
channels. These settings will serve as a starting-point for individual profile settings.
Once you’ve set up the keys on this screen, you won’t need to switch device modes
to control the volume, channels, etc.—no matter which device you’re controlling
with the other keys, the remote will automatically change volume on the device
you select here.
You can set the following options:
LCD screen (soft keys)
Volume keys
Menu navigation keys
Channel keys
TeleText (color) keys
Number keys
Playback keys
Input keys
To change an option from the one shown, highlight the option you’d like to
change, then choose the device you want these keys to control from the drop-
down list.
When you’ve finished setting the device you’d like the keys in each section of
the remote to control, click the Next button to proceed.
That’s it! You’ve set up your list of Favorite channels.
If you want to set up separate profiles for members of your family, with their
favorite channels and settings, click Yes. If you just want to use the Favorites
list for everyone, click No.
Favorites & Profiles
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating Individual Profiles
Once you’ve created the Favorites list, you can create individual profile lists for each member of the family.
If you select Yes from the final screen of the Favorites
setup wizard, you’re ready to start creating your first
If you selected No:
Choose Favorites from the Main menu and select
profile.
Add Profile from the submenu.
Add your Profile.
1
The first Create Profiles screen shows you the steps you’ll complete to set up your profile. Press Next to continue.
Choose Profile type
Choose the illustration you want for your profile—the name doesn’t matter: you
can set it in the next step.
Change name / Add a picture
Type in a name for the profile you’re creating.
You can customize the icon that appears next to your profile name with a
picture from your PC. Click the icon to add your picture. Then browse your PC
for the picture you want to use. For best results on the remote screen, use a
4x3 close-up picture (jpg format).
Click Next to give the profile this name and customized picture.
42
Favorites & Profiles
Download from Www.Somanuals.com. All Manuals Search And Download.
Choose the channels for this profile.
2
Click the scroll bar to find a channel you want to add to this profile. Highlight
a channel you want to add, and click the arrow that appears to the left of the
channel to add it to this profile.
IMPORTANT: Only the channels you’ve chosen as your favorites can be selected for a profile.
If you want to add a channel for your profile that you don’t see here, add it to your favorites by
choosing Favorites, and then Modify Favorites in the EZ-RC™ Remote Control Setup Wizard
Main Menu and following the on-screen instructions for adding channels.
Click the next space in the replica remote screen to add another channel to this
profile.
Then follow the same procedure you followed for adding the first channel.
When you’ve filled up a page, click the + icon below the replica remote screen to add another
page. Then click the first space in that page to start filling it with channels.
When you’ve added all the channels you want for this profile, click the Next
button. The setup wizard takes a few moments to prepare the next screen.
Favorites & Profiles
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Choose the devices controlled by each section of the remote.
3
In the final step in creating this profile, you set what different groups of keys
control by default when you’re using this profile.
This is useful, for example, if the person using this profile prefers to use the
surround sound system when watching TV—or if the person using this profile
should not use the surround sound system! Once you’ve set up the keys on this
screen, you won’t need to switch device modes to control the volume, channels,
etc.—no matter which device you’re controlling with the other keys, the remote
will automatically change volume on the device you select here.
You can set the following options:
LCD screen (soft keys)
Volume keys
Menu navigation keys
Channel keys
TeleText (color) keys
Number keys
Playback keys
Input keys
To change an option from the one shown, highlight the option you’d like to
change, then choose the device you want these keys to control from the drop-
down list.
When you’ve finished setting what device you’d like the keys of each part of the
remote to control, click the Next button to proceed.
That’s it! You’ve finished setting up this profile.
If you want to set up another profile (for someone else in the family, for
example), click Yes. If you just want to just stick with this profile for now, click
No.
44
Favorites & Profiles
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Most common problems with your Xsight™ Touch can be resolved by trying one of the following solutions. If you have
any further questions, please call our help line toll-free at 1-800-276-0509.
•
I can’t find a code that works my device (or one that does everything
I want it to do).
Make sure you’re pointing the remote directly at the device you’re trying
to control.
Initial setup
My remote doesn’t come on automatically when I pick it up.
Press the OK key to wake the remote up. Once you’ve completed the initial
setup, you can change the Tilt setting by accessing Settings from the home
screen and Tilt from the Settings menu. If this setting is off, turn it on.
•
It may take a few seconds for your device to respond to a command
(especially on or off). Be patient between presses—give your device a few
seconds to respond.
•
The screens are in the wrong language.
Some brands of devices do not use a POWER key to turn the device
on or off. Instead they use separate POWER ON and POWER OFF keys.
Check your devices’ original remotes to see if any of them have these
separate power keys. If they do, use other keys (volume, channel, or
number keys) to test codes in this step.
Change the setting by pressing the
or more screens in the setup routine.
(Home/Back) key to go back one
On-remote device setup
How do I access on-remote device setup?
If you quit setup after setting the time, you can access device setup
through the Setup menu on the remote. In the Home screen, choose
Setup (it’s on the second page of the Home screen—use the slider bar
to access it). Then press Device Setup and Add Device. Then follow the
rest of the instructions in the Out of the box section.
If the above solutions don’t work completely, use the EZ-RC™ Remote
Control Setup Wizard. The setup wizard lets you enter your device’s
model number to find exactly the right code for your device. If you find a
code that does most of what you want to do with a device, you can learn
additional keys from your original remote through the remote’s Settings
menu (see the remote’s user manual for instructions).
•
•
How can I go back if I make a mistake?
•
•
I don’t see my device in the “What is it” screen.
Press the
(Home/Back) key to go back one or more screens in the
Try the EZ-RC™ Remote Control Setup Wizard. On-remote device setup
supports the most popular models of the most popular brands. The
EZ-RC™ Remote Control Setup Wizard handles everything else. See the
sections on the EZ-RC™ Remote Control Setup Wizard for information.
setup routine.
The EZ-RC™ Remote Control Setup Wizard
•
I don’t see my brand in the “Brand” screen.
The EZ-RC™ program won’t install on my PC.
Try the EZ-RC™ Remote Control Setup Wizard. On-remote device setup
supports the most popular models of the most popular brands. The
EZ-RC™ Remote Control Setup Wizard handles everything else. See the
sections on the EZ-RC™ Remote Control Setup Wizard for information.
Your PC must be running Windows XP or Windows Vista (Windows 2000
is not supported). You must use Internet Explorer 6.0 or later (Firefox or
Safari not supported).
Troubleshooting
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows XP users must have Service Pack 3 and .Net 3.5
•
I get an error message after I connect my remote.
You might need to change your Active X settings in Internet Explorer for
the EZ-RC™ Remote Control Setup Wizard to work.
To find out what service pack version you have:
1. Right click on My Computer on your PC desktop.
2. Choose Properties from the drop-down menu.
3. In the General Tab, the Service Pack is listed under System.
To change Active X settings:
1. Click OK in the “Missing necessary software...” dialog box.
2. Locate the yellow warning bar just above the AR remote control setup
wizard page.
3. Click where it says “click here” on the yellow warning bar to change
the Active X setting.
To update to SP3:
1. Insert the CD that came with the remote. The CD goes automatically
to Microsoft update site if you have a working internet connection.
2. At the Microsoft website, click Express to begin the updating
process. The Microsoft site checks your computer (this takes about
5-10 minutes).
3. The Microsoft site will tell you which updates you need to install.
Follow the Microsoft site and installation wizard instructions to
download and install updates.
4. Click the Connect button again at the bottom of the screen.
Setting Up Activities
I want to add a key command to my Watch Movie/Satellite/Cable
activity, but I don’t see it in the list of commands.
•
If you have SP1, this will take 1 hour to update to SP2; an additional
30 mins for SP3 (depending on connection speed)
Make sure you’ve selected the correct device from the drop-down menu.
Double check your original remote and make sure you’ve written down
the key name correctly.
If you have SP2, this will take 30 mins for SP3 (depending on
connection speed)
If you haven’t entered model number information for this device in the
EZ-RC™ Remote Control Setup Wizard, go to the Main menu, select
Devices and Modify Device. Then enter the model number for this
device to get all the functionality available.
4. Close all internet browser windows and continue with EZ-RC install.
What if my CD doesn’t start installation automatically?
Open the CD and double-click on the Wiz2 icon.
•
•
If you still don’t see the key command you’re looking for, you can have
the Xsight™ Touch learn this key from your original remote. See page 28
for more information.
If you have Windows XP and need Service Pack 3, see the Important
Note for Windows XP users on the previous page (Vista users do not
need this kind of update).
•
I’ve set up Activities on my PC, but I can’t access them on my remote.
You must download any changes you’ve made to your settings in the EZ-
RC™ Remote Control Setup Wizard to the remote. Go to the main menu
and click Download to Remote to save your settings to the remote itself.
Otherwise, the work you’ve done will not be saved to your remote. See
page 34 for more information.
The EZ-RC™ program seems slow.
Proxy servers, like those used in many business networks, may affect
the performance of the EZ-RC™ Remote Control Setup Wizard. For best
results, use the EZ-RC™ Remote Control Setup Wizard with a direct
internet connection (for example, your home connection).
•
•
How do I know the remote’s connected?
Look for the green arrow icon in your PC’s status bar.
Using Activities
How do I know when an activity has finished?
When you see the Assist key and soft keys for one of your devices
on the remote screen, the remote has finished sending the activity’s
commands and is ready to do something else.
I see a progress bar in the corner of the screen when I connect the
remote.
Your remote’s firmware is being updated. Don’t disconnect the remote!
The Xsight™ Touch is constantly being updated and improved, to get the
latest codes and provide the most advanced functionality available.
•
46
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
•
My Hello activity didn’t work.
Using Favorites and Profiles
On the remote screen, press Assist. Then press Power On/Off. Press
the key for each device to turn that device on. Use the slider to access
more devices.
•
I can’t find a channel I want to add to my Favorites.
You can add it manually by choosing Other at the top of the list. You can
then choose to display this channel by a text label or search the EZ-RC™
Remote Control Setup Wizard library for a channel icon. To use an icon
from the library (or to choose your own), select Show Channel Icon,
then click the … button.
Make sure your remote is pointed directly at your home entertainment
devices and that there’s nothing obstructing the path.
If the Power On/Off command in the Assist screen still doesn’t turn
your device on, you might be using the wrong command to power on
this device. Reconnect to the EZ-RC™ Remote Control Setup Wizard and
choose Activities, Modify Activity. Then choose the Hello activity and
check the power on/off commands. See page 16 for more information.
Scroll through the icons available in the collection and highlight the logo
you want. If you don’t see the icon you want, you can add your own by
clicking the Browse button and finding the artwork for the icon on your
PC. Press OK when you’ve selected the icon you want.
Make sure all your devices are off before you start the Hello activity.
The channel icon appears in the replica of the remote screen. Continue with
the instructions that follow to add the channel number for this channel.
•
•
My Watch Movie/Satellite/Cable activity didn’t work.
On the remote screen, press Assist. Then press No Sound or No
Picture. Finally, press the on-screen input button until you see or hear
the correct signal.
•
I can’t find a channel I want to add to my Profile.
Only the channels you’ve chosen as your favorites can be selected for a
profile. If you want to add a channel for your profile that you don’t see
here, add it to your favorites by choosing Favorites, and then Modify
Favorites in the EZ-RC™ Remote Control Setup Wizard Main Menu and
following the on-screen instructions for adding channels.
The wrong device is changing inputs in the Assist screens.
Make sure the input key you see on the No Sound/No Picture screen is
the correct one for the device you’re trying to change. If it isn’t, press
the
key and try the other Assist option (for example, No Sound if you
•
•
•
How do I customize my Profile’s picture?
chose No Picture first)
In the second Add Profile screen (where you can change the name of the
Profile), click the Profile’s icon and browse your PC for the picture you
want to use.
If that option is still changing inputs on the wrong device, connect the remote
to your PC and launch the EZ-RC™ Remote Control Setup Wizard. In the
main menu, choose Activities, Modify an Activity, the activity you want to
modify, and Key Command Sequence. In the Key Command Sequence, check
that you’ve chosen the correct input commands for each device.
How do I start a second page of favorite channels?
When you’ve filled up a page, click the + icon below the replica remote
screen to add another page. Then click the first space in that page to
start filling it with channels.
•
The device is going to the wrong input or not changing inputs at all
in the Assist screens.
I can’t tune to one or more of my favorite channels.
Make sure all your favorite channels are on a single source, like your cable
box or satellite receiver. Favorites won’t work with a second source (for
example, a satellite receiver and over-the-air programming on your TV).
Make sure the input key you see on the No Sound/No Picture screen matches
the device input you’re trying to access. If it doesn’t, you’ll need to change to
the correct command in the EZ-RC™ Remote Control Setup Wizard.
If you have digital sub-channels in your Favorites list (like 59.1), choose 4
digits in the Favorites setup. See page 38 for more information.
Make sure the settings for Favorites match the way you tune to channels
in your system. See page 38 for more information.
Connect the remote to your PC and launch the EZ-RC™ Remote Control
Setup Wizard. In the main menu, choose Activities, Modify an Activity,
the activity you want to modify, and Key Command Sequence. In the
Key Command Sequence, check that you’ve chosen the correct input
commands for each device.
Make sure the channel numbers you entered for your favorite channels
are accurate for your system.
Troubleshooting
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Need help setting up this remote?
Please call our help line toll-free at 1-800-276-0509.
Use of the software provided with this product may require the most recent
Xsight™ and EZ-RC™ are trademarks or registered trademarks of Universal
Electronics Inc. Windows® is a registered trademark Of Microsoft
Corporation. All trademarks are the properties of their respective owners.
All trademarks are the properties of their respective owners.
Windows® updates in order to function properly. Any such updates are
third party software which shall be governed by such third party’s license
agreement. Audiovox is not responsible for any third party’s software and
shall have no liability for your use of third party software.
©2009 Audiovox Accessories Corporation
ARRX18G NA Setup 03
Download from Www.Somanuals.com. All Manuals Search And Download.
|