RMC 7155
14” short depth server
14” short depth server
Installation Guide
RMC 7155: 14” short depth server with two Intel Xeon
processors
1
© Copyright 2009 Acnodes, Inc.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
Download from Www.Somanuals.com. All Manuals Search And Download.
RMC 7155
14” short depth server
14” short depth server
Installing the Chassis Rails
Position the fixed chassis rail sections you just removed along the side of the chassis making sure the five screw holes line up.
Note that these two rails are left/right specific. Screw the rail securely to the side of the chassis (see Figure
2-2). Repeat this procedure for the other rail on the other side of the chassis. You will also need to attach the rail brackets
when installing into a telco rack.
Locking Tabs: As you have seen, both chassis rails have a locking tab, which serves two functions. The first is to lock the
server into place when installed and pushed fully into the rack, which is its normal position. Secondly, these tabs also lock the
server in place when fully extended from the rack. This prevents the server from coming completely out of the rack when you
pull it out for servicing.
3
© Copyright 2009 Acnodes, Inc.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
Download from Www.Somanuals.com. All Manuals Search And Download.
RMC 7155
14” short depthserver
15-inch touch panel PC
Installing the Rack Rails
Determine where you want to place the RMC 7152 in the rack (see Rack and Server Precautions in Section 2-3). Position the
fixed rack rail/sliding rail guide assemblies at the desired location in the rack, keeping the sliding rail guide facing the inside of
the rack. Screw the assembly securely to the rack using the brackets provided. Attach the other assembly to the other side of
the rack, making sure that both are at the exact same height and with the rail guides facing inward.
Installing the Server Into the Rack
You should now have rails attached to both the chassis and the rack unit. The next step is to install the server into the rack. Do
this by lining up the rear of the chassis rails with the front of the rack rails. Slide the chassis rails into the rack rails, keeping
the pressure even on both sides (you may have to depress the locking tabs when inserting). See Figure 2-3.
When the server has been pushed completely into the rack, you should hear the locking tabs "click".
4
© Copyright 2009 Acnodes, Inc.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
Download from Www.Somanuals.com. All Manuals Search And Download.
RMC 7155
14” short depth server
14” short depth server
Installing the Server into a Telco Rack
If you are installing the RMC 7152 into a Telco type rack, follow the direc- tions given on the previous pages for rack installa-
tion. The only difference in the installation procedure will be the positioning of the rack brackets to the rack. They should be
spaced apart just enough to accomodate the width of the telco rack.
5
© Copyright 2009 Acnodes, Inc.
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
Download from Www.Somanuals.com. All Manuals Search And Download.
|