Acer Projector
K11 Series
User's Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
Information for your safety and
comfort
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Turning the product off before cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Caution for plug as disconnecting device
Observe the following guidelines when connecting and disconnecting power to
the external power supply unit:
•
•
•
Install the power supply unit before connecting the power cord to the AC
power outlet.
Unplug the power cord before removing the power supply unit from the
projector.
If the system has multiple sources of power, disconnect power from the
system by unplugging all power cords from the power supplies.
Caution for Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the power cord from the
electrical outlet.
Warnings!
•
•
Do not use this product near water.
Do not place this product on an unstable cart, stand or table. If the product
falls, it could be seriously damaged.
•
Slots and openings are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat register, or
in a built-in installation unless proper ventilation is provided.
•
Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
iv
•
•
To avoid damage of internal components and to prevent battery leakage,
do not place the product on a vibrating surface.
Never use it under sporting, exercising, or any vibrating environment
which will probably cause unexpected short current or damage rotor
devices, lamp.
Using electrical power
•
This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
•
•
Do not allow anything to rest on the power cord. Do not locate this
product where people will walk on the cord.
If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.
•
•
Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.
This product's AC adapter is equipped with a three-wire grounded plug.
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the AC adapter plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.
Warning! The grounding pin is a safety feature. Using a power outlet that is
not properly grounded may result in electric shock and/or injury.
Note: The grounding pin also provides good protection from unexpected
noise produced by other nearby electrical devices that may interfere with
the performance of this product.
•
Use the product only with the supplied power supply cord set. If you need
to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, VDE
approved or its equivalent, 4.6 meters (15 feet) maximum length.
Download from Www.Somanuals.com. All Manuals Search And Download.
v
Product servicing
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:
•
•
•
•
•
the power cord or plug is damaged, cut or frayed
liquid was spilled into the product
the product was exposed to rain or water
the product has been dropped or the case has been damaged
the product exhibits a distinct change in performance, indicating a need
for service
•
the product does not operate normally after following the operating
instructions
Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to normal condition.
Warning! For safety reasons, do not use non-compliant parts when adding
or changing components. Consult your reseller for purchase options.
Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.
Additional safety information
•
Do not look into the projector's lens when the lamp is on. The bright may
hurt your eyes.
•
•
Turn on the projector first and then signal sources
Do not place the product in following environments:
•
•
•
Space that is poorly ventilated or confined. At least 50cm clearance from walls
and free flow of air around the projector is necessary.
Locations where temperatures may become excessively high, such as inside of a
car with all windows rolled up.
Locations where excessive humidity, dust, or cigarette smoke may contaminate
optical components, shortening the life span and darkening the image.
•
•
•
Locations near fire alarms.
Locations with an ambient temperature above 40 ºC/104 ºF.
Locations where the altitudes are higher than 10000 feet.
•
Unplug immediately if there is something wrong with your projector. Do
not operate if smoke, strange noise or odor comes out of your projector. It
Download from Www.Somanuals.com. All Manuals Search And Download.
vi
might cause fire or electric shock. In this case, unplug immediately and
contact your dealer.
•
Do not keep using this product to break or drop it. In this case contact your
dealer for inspection.
•
•
Do not face the projector lens to the sun. It can lead to fire.
When switching the projector off, suggest to ensure the projector
completes its cooling cycle before disconnecting power.
•
Do not turn off the main power abruptly or unplug the projector during
operation. It can lead to lamp breakage, fire, electric shock or other
trouble. The best way is to wait for the fan to turn off before turning main
power off.
•
•
Do not touch air outlet grille and bottom plate which becomes hot.
Clean the air filter frequently if have. The temperature inside may rise and
cause damage when the filter/ventilation slots clogged with dirt or dust.
•
•
•
Do not look into the air outlet grille when projector is operating. It may
hurt your eyes.
Always open the lens shutter or remove the lens cap when the projector is
on.
Do not block the projector lens with any object when the projector is
under operation as this could cause the object to become heated and
deformed or even cause a fire. To temporarily turn off the lamp, press HIDE
on the remote control.
•
The lamp becomes extremely hot during operation. Allow the projector to
cool for approximately 45 minutes prior to removing the lamp assembly for
replacement.
•
•
•
•
•
•
Do not operate lamps beyond the rated lamp life. It could cause it to break
on rare occasions.
Never replace the lamp assembly or any electronic components unless the
projector is unplugged.
The product will detect the life of the lamp itself. Please be sure to change
the lamp when is showing warning message.
When changing the lamp, please allow unit to cool down, and follow all
changing instructions.
Reset the "Lamp Hour Reset" function from the Onscreen display
"Management" menu after replacing the lamp module.
Do not attempt to disassemble this projector. There are dangerous high
voltages inside which may hurt you. The only user serviceable part is the
lamp which has its own removable cover. Refer servicing only to suitable
qualified professional service personnel.
•
•
Do not stand the projector on end vertically. It may cause the projector to
fall over, causing injury or damage.
This product is capable of displaying inverted images for ceiling mount
installation. Only use acer ceiling mount kit for mounting the projector
and ensure it is securely installed.
Download from Www.Somanuals.com. All Manuals Search And Download.
vii
Caution for Listening
To protect your hearing, follow these instructions.
•
•
•
•
•
Increase the volume gradually until you can hear clearly and comfortably.
Do not increase the volume level after your ears have adjusted.
Do not listen to music at high volumes for extended periods.
Do not increase the volume to block out noisy surroundings.
Decrease the volume if you can't hear people speaking near you.
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize
pollution and ensure utmost protection of the global environment, please
recycle. For more information on the Waste from Electrical and Electronics
Equipment (WEEE) regulations, visit
Download from Www.Somanuals.com. All Manuals Search And Download.
viii
First things first
Usage Notes
Do:
•
•
Turn off the product before cleaning.
Use a soft cloth moistened with mild detergent to clean the display
housing.
•
Disconnect the power plug from AC outlet if the product is not being used
for a long period of time.
Don't:
•
•
•
Block the slots and openings on the unit provided for ventilation.
Use abrasive cleaners, waxes or solvents to clean the unit.
Use under the following conditions:
•
•
•
•
In extremely hot, cold or humid environments.
In areas susceptible to excessive dust and dirt.
Near any appliance that generates a strong magnetic field.
Place In direct sunlight.
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user's guide to maximize the life of your unit.
Warning:
•
To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
•
•
Please do not open or disassemble the product as this may cause electric shock.
When switching the projector off, please ensure the projector completes its cooling
cycle before disconnecting power.
•
•
Turn on the projector first and then the signal sources.
Do not use lens cap when projector is in operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Information for your safety and comfort
First things first
Usage Notes
viii
Precautions
Introduction
1
Product Features
Package Overview
Projector Overview
Projector Outlook
Control Panel
Remote Control Layout
Getting Started
Connecting the Projector
Turning the Projector On/Off
Turning on the Projector
Adjusting the Projected Image
10
User Controls
17
19
19
20
20
21
Installation menu
Acer Empowering Technology
Color
Image
Setting
Management
Audio
Timer
Language
Appendices
22
Troubleshooting
22
Download from Www.Somanuals.com. All Manuals Search And Download.
LED & Alarm Definition Listing
Specifications
26
27
28
Compatibility modes
Regulations and safety notices
32
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Introduction
Product Features
This product is a single-chip DLP® projector. Outstanding features include:
•
•
DLP® technology
858 x 600 SVGA resolution
4:3/16:9/Full aspect ratio supported
•
•
•
•
•
Versatile display modes (Bright, Standard,Video, Picture, Game, User)
enable optimum performance in any situation
NTSC/PAL/SECAM compatible and HDTV (480i/p, 576i/p, 720p, 1080i/p)
supported
Compact size projector facilitates business purposes and home
entertainment.
Acer EcoProjeciton Technology delivers Intelligent power management
approach and physical efficiency improvement
Empowering Key reveals Acer Empowering Technology utilities (Acer
eView, eTimer, ePower Management) for easy adjustment of settings
•
•
•
•
•
•
Equipped with HDMITM connection supporting HDCP
Advanced digital keystone correction delivers optimum presentations
Multi-language on screen display (OSD) menus
2x digital zoom and pan move function
Environmental light source and longer life by LED solution.
Enjoy media playback via USB and SD card reader.
•
Microsoft® Windows® 2000, XP, Vista® Windows® 7, Macintosh® OS
compliant
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Package Overview
This projector comes with all the items shown below. Check to make sure your
unit is complete. Contact your dealer immediately if any thing is missing.
Projector with lens cap
Power cord
AC adapter
VGA cable
3.5 mm jack A/V cable
3.5 mm jack A/V to RCA
cable
XXXXXX
3V
Remote control
Battery
Carrying case
Acer Projector
Quick Start Guide
User's Guide x2
Quick start guide
Adapter for iPod/iPhone
(Optional)
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Projector Overview
Projector Outlook
Front / upper side
6
7
5
4
2
1
8
3
#
Description
#
Description
Remote control receivers
Control panel
1
5
Lens cap
2
3
4
6
7
8
Tilt adjusting wheel
Zoom Lens
Power button
Focus ring
DC IN connector
Rear side
2
3
4
5
AV IN
VGA IN
HDMI
USB
6
7
1
#
Description
#
5
Description
1
DC IN connector
USB connector (for multimedia)
Audio/Video In (3.5mm Mini Jack, for
audio/ composite source, iphone/ipod
support)
2
6
7
SD Card reader
PC analog signal/HDTV/component
video input connector
3
4
Kensington™ lock port
HDMI connector
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Control Panel
4
2
3
1
#
Function
Description
Power button and Power Indicator LED.
See the contents in "Turning the Projector On/
Off" section.
1
POWER
SOURCE
Press "SOURCE" to choose RGB, Component, S-
Video, Composite, HDTV and HDMI™ sources.
2
3
•
Press "MENU" to launch the Onscreen display
(OSD) menu, back to the previous step for the
OSD menu operation or exit the OSD menu.
Confirm your selection of items.
MENU
•
Use to
select items or make
4
Four directional select keys
adjustments to your selection.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Remote Control Layout
1
2
4
6
3
5
7
9
8
11
12
10
17
13
15
14
16
Model No.:IR28012AC1
Parex Elecctronicss && Computerr CO., LTD
#
Icon
Function
Infrared
Description
Sends signals to the projector.
1
transmitter
FREEZE
To pause the screen image.
2
3
POWER
HIDE
Refer to the "Turning the Projector On/Off" section.
4
Momentarily turns off the video. Press "HIDE" to hide the
image, press again to display the image.
To pause the screen image.
5
6
7
ASPECT RATIO
RESYNC
Automatically synchronizes the projector to the input source.
SOURCE
Press "SOURCE" to choose from RGB, Component, S-Video,
Composite, Video and HDTV sources.
8
9
BACK/STOP
Press "Back/Stop" to stop playing media file or go back to
upper data folder.
Enter/Play/Pause Press "Enter/Play/Pause" to play/pause media file.
Pre./Rewind
MENU
Press "Pre./Rewind" to go to previous index or press
continuously to rewind the playing media file.
10
11
•
Press "MENU" to launch the Onscreen display (OSD)
menu, back to the previous step for the OSD menu
operation or exit the OSD menu.
•
Confirm your selection of items.
12
13
14
Next/
Fastforward
SD/USB
Press "Next/Fast-forward" once to go to next index or press
continuously to fast-forward the playing media file.
Press "SD/USB" to toggle between SD and USB sources. This
projector supports various file formats of photo/audio/ video.
Zooms the projector display in or out.
ZOOM
Download from Www.Somanuals.com. All Manuals Search And Download.
6
#
15
Icon
Function
Description
Empowering key Unique Acer functions: eOpening, eView, eTimer, ePower
Management.
Press " " key under SD/USB A source, the setting page will
be shown for user's adjustment.
16
17
VOLUME
Four directional Use up, down, left, right buttons to select items or make
select keys adjustments to your selection.
Decreases/increases the volume.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Getting Started
Connecting the Projector
DVD player,
Set-top Box,
HDTV receiver
5
DVD player
R
B G
HDMI
1
2
3
6
4
HDTV adapter
D-Sub
HDMI
AV IN
VGA IN
HDMI
USB
SD CARD
iPod/iPhone
11
7
9
10
8
DVD player,
Set-top Box,
HDTV receiver
#
Description
#
Description
1 Power cord
7 3.5 mm jack A/V cable
8 Adapter for iPod/iPhone
9 3.5 mm jack A/V to RCA cable
10 SD card
2 AC adapter
3 VGA cable
4 VGA to component/HDTV adapter
5 3 RCA component cable
6 HDMI cable
11 USB disk/stick
Note: To ensure the projector works well with your computer,
please make sure the timing of the display mode is compatible
with the projector.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Turning the Projector On/Off
Turning on the Projector
1
2
Remove the lens cap.(Illustration #1)
Ensure that the power cord and signal cable are securely connected. The
Power indicator LED will flash red.
3
4
Turn on the projector by pressing "Power" button on the control panel,
and the Power indicator LED will turn blue.(Illustration #2)
Turn on your source (computer, notebook, video player ,etc.). The
projector will detect your source automatically.
•
If the screen displays "Lock" and "Source" icons, it means the
projector is locked onto a specific source type and there is no such
type of input signal detected.
•
•
If the screen displays "No Signal", please make sure the signal cables
are securely connected.
If you connect to multiple sources at the same time, use the "Source"
button on either control panel or the remote control or direct source
key on the remote control to switch between inputs.
2
Power button
1
Lens cap
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Turning the projector off
1
To turn the projector off, press the power button. This message appears:
"Please press the power button again to complete the shutdown process."
Press the power button again.
2
The LED power indicator will turn RED and blink rapidly after the projector
is turned off, and the fan(s) will continue to operate for about 2 minutes to
ensure that the system cools properly.
3
4
Once the system has finished cooling, the LED power indicator will stop
blinking and turn solid red to indicate standby mode.
It is now safe to unplug the power cord.
Warning indicators:
•
•
"Projector Overheated. Will automatically turn off soon."
This onscreen message indicates that the projector has overheated.
The lamp with automatically turn off, the projector will automatically
shut. Contact your local dealer or service center.
"Fan failed. Will automatically turn off soon."
This onscreen message indicates that the fan has failed. The lamp will
automatically turn off, the projector will automatically shut down.
Contact your local dealer or service center.
Note: Whenever the projector automatically shuts down, contact
your local reseller or service center.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Adjusting the Projected Image
Adjusting the Height of Projected Image
The projector is equipped with tilt adjusting wheel for adjusting the height of
image.
To raise/lower the image:
1
Use Tilt adjusting wheel to fine-tune the display angle.
Tilt adjusting wheel
Download from Www.Somanuals.com. All Manuals Search And Download.
11
How to optimize image size and distance
Consult the table below to find the optimal image sizes achievable when the
projector is positioned at a desired distance from the screen. Example: If the
projector is 3 m from the screen, good image quality is possible for image sizes
71".
¥
Note: Remind as below figure, the space of 118 cm height is
required when located at 3m distance.
screen size
Height:
118cm
C
A
3m
Desired Distance
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Screen size
(Min zoom)
Top
Desired
Distance (m)
<A>
From base
to top of
image (cm)
<C>
Diagonal (inch)
<B>
W (cm) x H (cm)
0.64
1.2
2.0
2.4
2.6
3.0
3.4
15
28
47
57
60
71
80
31 x 22
59 x 41
25
47
98 x 69
79
118 x 82
125 x 87
147 x 103
167 x 117
95
101
118
134
Zoom Ratio: 1.0x
Download from Www.Somanuals.com. All Manuals Search And Download.
13
User Controls
Installation menu
The installation menu provides an onscreen display (OSD) for projector
installation and maintenance. Use the OSD only when the message "No signal
input" is displayed on the screen.
The menu options include settings and adjustments for screen size and distance,
focus, keystone correction and more .
1
2
Turn on the projector by pressing "Power" button on the control pad.
Press the "MENU" button on the control pad to launch the OSD for
projector installation and maintenance.
3
4
The background pattern acts as a guide to adjusting the calibration and
alignment settings, such as screen size and distance, focus and more .
The Installation menu includes the following options:
•Projection method
•Projection location
•Menu location
•Keystone settings
•Language settings
•Reset to factory default function
Use the up and down arrow keys to select an option, the left and right
arrow keys to adjust selected option settings, and the right arrow key to
enter a submenu for feature setting. The new settings will be saved
automatically upon exiting the menu.
5
Push the menu button anytime to exit the menu and return to the Acer
welcome screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Acer Empowering Technology
Acer Empowering Key provide three
Empowering Key
Acer unique functions, they are "Acer
eView Management", "Acer eTimer
Management" and "Acer ePower
Management" respectively. Press "
"
key for more than one second to launch
the Onscreen display main menu to
modify its function.
Acer eView Management
Press " " to launch "Acer eView
Management" submenu.
"Acer eView Management" is for
display mode selection. Please refer to
Onscreen Display Menus section for
more detail.
Acer eTimer Management
Acer ePower Management
Press " " to launch "Acer eTimer
Management" submenu.
"Acer eTimer Management" provides
the reminding function for
presentation time control. Please refer
to Onscreen Display Menus section for
more detail.
Press " " to launch "Acer ePower
Management".
"Acer ePower Management" provides
user one shortcut to save lamp and
projector life. Please refer to Onscreen
Display section for more detail.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Onscreen Display (OSD) Menus
The projector has multilingual OSD that allow you to make image adjustments
and change a variety of settings.
Using the OSD menus
•
•
To open the OSD menu, press "MENU" on the remote control.
When the OSD is displayed, use the
keys to select any item in the
main menu. After selecting the desired main menu item, press
submenu for feature setting.
to enter
•
Use the
keys to select the desired item and adjust the settings by
keys.
using the
•
•
•
Select the next item to be adjusted in the submenu and adjust as described
above.
Press "MENU" on the remote control, the screen will return to the main
menu.
To exit OSD, press "MENU" on the remote control again. The OSD menu
will close and the projector will automatically save the new settings.
Main menu
Setting
Sub menu
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Color
There are many factory presets optimized for various types of
images.
Display Mode
•
•
•
•
•
•
Bright: For brightness optimization.
Standard: For common environment.
Video: For playing video in a bright environment.
Picture: For graphic picture.
Game: For game content.
User: Memorize user’s settings.
Use this function to choose a proper color according to the wall.
There are several choices, including white, light yellow, light blue,
pink, dark green. It will compensate the color deviation due to the
wall color to show the correct image tone.
Wall color
Brightness
Adjust the brightness of the image.
•
•
Press
Press
to darken image.
to lighten the image.
"Contrast" controls the difference between the lightest and
darkest parts of the picture. Adjusting the contrast changes the
amount of black and white in the image.
Contrast
•
•
Press
Press
to decrease the contrast.
to increase the contrast.
Adjust the color temperature. At higher color temperatures, the
screen looks colder; at lower color temperatures, the screen looks
warmer.
Color
Temperature
Effects the representation of dark scenery. With greater gamma
value, dark scenery will look brighter.
Degamma
Saturation
Adjusts a video image from black and white to fully saturated
color.
•
•
Press
Press
to decrease the amount of color in the image.
to increase the amount of color in the image.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Adjusts the color balance of red and green.
Tint
•
•
Press
Press
to increase the amount of green in the image.
to increase the amount of red in the image.
Note: "Saturation" and "Tint" functions are not supported under computer
mode or HDMI mode.
Image
Projection mode
•
•
Front: The factory default setting.
Rear: Reverses the image so you can project from behind a
translucent screen.
Projection Location
•
Auto: Automatically adjusts projection location of image.
Desktop
•
•
Ceiling: Turns the image upside down for ceiling-mounted
projection.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Use this function to choose your desired aspect ratio.
Aspect Ratio
•
•
•
•
Auto: Keep the image with original width-higth ratio and maxi
mize the image to fit native horizontal or vertical pixels.
4:3: The image will be scaled to fit the screen and displayed using
a 4:3 ratio.
16:9: The image will be scaled to fit the width of the screen and
the height adjusted to display the image using a 16:9 ratio.
Full: Resize image to fit full screen by width (1280 pixels) and
height (800 pixels).
Auto Keystone
Automatically adjusts vertical image.
Manual Keystone Adjust image distortion caused by tilting projection. (±40 degrees)
<Note> The Manual Keystone funcion is unavailable under Auto
Keystone setting to "On".
H. Position
(Horizontal
position)
•
•
Press
Press
to move the image left.
to to move the image right.
V. Position
(Vertical position)
•
•
Press
Press
to move the image down.
to move the image up.
Frequency
"Frequency" changes the projector's refresh rate to match the
frequency of your computer’s graphics card. If you can see a vertical
flickering bar in the projected image, use this function to make the
necessary adjustments.
Tracking
Synchronizes the signal timing of the projector with the graphics card.
If you experience an unstable or flickering image, use this function to
correct it.
Sharpeness
Adjusts the sharpness of the image.
•
•
Press
Press
to decrease the sharpness.
to increase the sharpness.
Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions
are not supported under DVI or Video mode.
Note: "Sharpness" functions is not supported under DVI and Computer
mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Setting
Menu Location
Source Lock
Choose the menu location on the display screen.
When source lock is turned "off", the projector will search for
other signals if the current input signal is lost. When source lock is
turned "on", it will "lock" the current source channel unless you
press "Source" button on the remote control for the next channel.
Closed Caption
Selects a preferred closed captioning mode from CC1, CC2, CC3,
CC4, (CC1 displays captions in the primary language in your area).
Select "Off" to turn off the captioning feature. This function is only
available when a composite video or S-Video input signal is
selected and its system format is NTSC.
<Note> Set your screen aspect ratio to 4:3. This function is not
available when the aspect ratio is "16:9" or "Auto" .
Reset
Press the
button and choose "Yes" to return the parameters
on all menus to the factory default settings.
Management
Choose "On" to turn on High Altitude mode. Operate the fans at
full speed continuously to allow for proper high altitude cooling of
the projector.
High Altitutde
Auto Shutdown
LED Calibration
The projector will automatically shutdown when there is no signal
input after the allocated time. (in minutes)
Press
after choosing "Yes", please wait for 10 seconds to finish
the white color fine tune process. It helps to adjust LED color
performance.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Audio
Volume
Mute
•
•
Press
Press
to decrease the volume.
to increase the volume.
•
•
Choose "On" to mute the volume.
Choose "Off" to restore the volume.
Power On/Off Volume
Alarm Volume
•
Select this function to adjust the notification volume when
turning the projector on/off.
•
Select this function to adjust the volume of any warning
notifications.
Timer
Timer Location
Timer Start
•
•
Choose the location of the timer on the screen.
Press
Press
to start or stop the timer.
Timer Period
Timer Display
•
•
or
or
to adjust the timer period.
to which timer mode to display on the
Press
screen.
Timer Volume
•
Select this function to adjust the notification volume when
the timer function is enabled and time is up.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Appendices
Troubleshooting
If you experience a problem with your Acer projector, refer to the following
troubleshooting guide. If the problem persists, please contact your local reseller
or service center.
Image Problems and Solutions
#
Problem
Solution
1
No image appears
onscreen
•
•
•
Connected as described in the "Getting Started"
section.
Ensure none of the connector pins are bent or
broken.
Check if the projector lamp has been securely
installed. Please refer to the "Replacing the Lamp"
section.
•
Make sure you have removed the lens cap and the
projector is switched on.
2
Partial, scrolling
or incorrectly
displayed
image(For PC
(Windows 95/98/
2000/XP))
•
•
Press "RESYNC" on the remote control.
For an incorrectly displayed image:
•
Open "My Computer," open the "Control
Panel," and then double-click the "Display"
icon.
•
•
Select the "Settings" tab.
Verify that your display resolution setting is
lower than or equal to 1080P-EIA.
Click the "Advanced Properties" button.
•
If the problem still appears, change the monitor display
you are using and follow the steps below:
•
•
•
Verify that the resolution setting is lower than
or equal to 1080P-EIA.
Click the "Change" button under the
"Monitor" tab.
Click "Show all devices". Next, select "Standard
monitor types" under the SP box, and choose
the resolution mode you need under the
"Models" box.
•
Verify that the resolution setting of the
monitor display is lower than or equal to
1080P-EIA.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
3
Partial, scrolling
or incorrectly
displayed image
(for notebooks)
•
•
Press "RESYNC" on the remote control.
For an incorrectly displayed image:
•
Follow the steps for item 2 (above) to adjust
the resolution of your computer.
•
Press the toggle output settings. Example:
[Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8],
Gateway [Fn]+[F4], IBM [Fn]+[F7], HP
[Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5 ]
•
•
If you experience difficulty changing resolutions or
your monitor freezes, restart all equipment
including the projector.
®
®
4
The screen of the
notebook
computer is not
displaying your
presentation
If you are using a Microsoft Windows based
notebook: Some notebook PCs may deactivate their
own screens when a second display device is in use.
Each has a different way to be reactivated. Refer to
your computer's manual for detailed information.
®
®
•
If you are using an Apple Mac OS based
notebook: In System Preferences, open Display and
select Video Mirroring "On".
5
6
Image is unstable
or flickering
•
•
Adjust the "Tracking" to correct it. Refer to the
"Image" section for more information.
Change the display color depth settings on your
computer.
Image has vertical
flickering bar
•
•
Use "Frequency" to make an adjustment. Refer to
the "Image" section for more information.
Check and reconfigure the display mode of your
graphics card to make it compatible with the
projector.
7
8
Image is out of
focus
•
•
•
Make sure the lens cap is removed.
Adjusts the focus ring on the projector lens.
Make sure the projection screen is within the
required distance of 2.10 - 11.15 feet (0.64 - 2.4
meters) from the projector. Refer to the "How to
Get a Preferred Image Size by Adjusting Distance
and Zoom" section for more information.
Image is stretched
when displaying a
"widescreen"
DVD title
When you play a DVD encoded in anamorphic or 16:9
aspect ratio you may need to adjust the following
settings:
•
If you play a 4:3 format DVD title, please change the
format to 4:3 in the projector OSD.
•
If the image is still stretched, you will also need to
adjust the aspect ratio. Set up the display format to
16:9 (wide) aspect ratio on your DVD player.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
9
Image is too small
or too large
•
•
Adjust the zoom ring on the top of the projector.
Move the projector closer to or further from the
screen.
•
Press "MENU" on the remote control or on the
control panel. Go to "Image --> Aspect Ratio" and
try different settings.
10
Image has slanted
sides
•
•
If possible, reposition the projector so that it is
centered on the screen.
Press the "Keystone
/
" on the OSD or the
remote control until the sides are vertical.
11
Image is reversed
•
Select "Image --> Projection" on the OSD and adjust
the projection direction.
Problems with the Projector
#
Condition
Solution
1
The projector stops responding
to all controls
If possible, turn off the projector, then
unplug the power cord and wait at least 30
seconds before reconnecting power.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
OSD Messages
#
Condition
Message
Message Reminder
1
Fan Fail - the system fan is not working.
Projector Overheated - the projector has exceeded its
recommended operating temperature and must be allowed to
cool down before it may be used.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
LED & Alarm Definition Listing
LED Messages
Power LED
Message
Red
Blue
Input Power Plug
Standby
Flash ON to OFF 100ms
--
V
--
Power button ON
Lamp retry
--
V
--
Quick Flashing
Power off (Cooling state)
Quick Flashing
V
--
--
Power button OFF:
Cooling completed;
Standby Mode
Error (Thermal Failure)
Error (Fan lock)
Quick Flashing RED and Steady BLUE by returns
Quick Flashing RED and Steady BLUE by returns
Quick Flashing BLUE and Steady RED by returns
Quick Flashing BLUE and Steady RED by returns
Error (Lamp breakdown)
Error (Color Wheel fail)
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Specifications
The specifications listed below are subject to change without notice. For final
specs, please refer to Acer's published marketing specifications.
®
Projection system
DLP
Resolution
SVGA (858 x 600)
Computer compatibility
IBM PC and compatibles, Apple Macintosh, iMac and
VESA standards: SXGA, XGA, SVGA, VGA
Video compatibility
NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/
K/K1/L), HDTV (720p, 1080i, 1080p), EDTV (480p,
576p), SDTV (480i, 576i)
Aspect ratio
4:3 (native), 16:9, Full
1.07 billion colors
F/ 2.2, f = 19.5 mm
Displayable colors
Projection lens
Projection screen size (diagonal) 15" (0.64 m) - 80" (3.40 m)
Projection distance
Throw ratio
2.10' (0.64 m) - 11.15' (2.4 m)
2.04
Horizontal scan rate
Vertical refresh scan rate
Keystone correction
Weight
30 k - 100 kHz
50 - 85 Hz
+/- 40 degrees
550 g (1.22 Ibs.)
Dimensions (W x D x H)
Power supply
122 mm X 116 mm X 42.5 mm (4.80" X 4.57" X 1.67")
AC 100 – 240 V, 50-60 Hz
Power consumption
Normal mode: 83 W +/-10% @ 110 Vac
Standby < 1 W
Operating temperature
I/O connectors
5ºC to 35ºC / 41ºF to 95ºF
•
•
•
•
•
DC IN x1
VGA input x1
Audio/Video input x1
SD (SDHC) x1
USB x1: for multimedia
Standard package contents
•
•
•
•
•
•
•
•
AC power cord x1
AC adapter x1
VGA cable x1
3.5 mm jack A/V cable x1
3.5 mm jack A/V to RCA cable x1
Remote control x1
Battery x 1 (for remote control)
User's Guide (CD-ROM) x1 (for projector
function)
•
User's Guide (CD-ROM) x1 (for multi-media
function)
•
•
Quick start guide x1
Carrying case x1
* Design and specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Compatibility modes
A. VGA Analog
1
VGA Analog - PC Signal
Modes
VGA
Resolution
V.Frequency [Hz] H.Frequency [KHz]
640x480
640x480
60
72
31.5
37.9
37.5
43.3
35.1
37.9
48.1
46.9
53.7
48.4
56.5
60.0
68.7
63.8
67.5
77.1
64.0
77.0
80.0
60.0
75.2
65.3
31.4
34.9
37.9
48.4
68.7
75.0
60.0
640x480
75
640x480
85
SVGA
800x600
56
800x600
60
800x600
72
800x600
75
800x600
85
XGA
1024x768
1024x768
1024x768
1024x768
1152x864
1152x864
1152x864
1280x1024
1280x1024
1280x1024
1280x960
1280x960
1400x1050
640x480
60
70
75
85
SXGA
70
75
85
60
72
75
QuadVGA
60
75
SXGA+
60
PowerBook G4
PowerBook G4
PowerBook G4
PowerBook G4
PowerBook G4
PowerBook G4
i Mac DV (G3)
60
640x480
66.6 (67)
60
800x600
1024x768
1152x870
1280x960
1024x768
60
75
75
75
Download from Www.Somanuals.com. All Manuals Search And Download.
29
2
VGA Analog - Extended Wide timing
Modes
WXGA
Resolution
1280x768
1280x768
1280x768
1280x720
1280x800
1440x900
V.Frequency [Hz] H.Frequency [KHz]
60
75
85
60
60
60
60
47.8
60.3
68.6
44.8
49.6
59.9
65.3
WSXGA+
1680x1050
1920x1080
(Reduced
Blanking Timing)
60
60
66.6
47.7
1366x768
3
VGA Analog - Component Signal
Modes
480i
Resolution
V.Frequency [Hz] H.Frequency [KHz]
720x480
(1440x480)
720x576
59.94(29.97)
50(25)
15.7
15.6
576i
(1440x576)
480p
576p
720x480
720x576
59.94
50
31.5
31.3
45.0
37.5
33.8
28.1
67.5
56.3
720p
1280x720
1280x720
1920x1080
1920x1080
1920x1080
1920x1080
60
720p
50
1080i
1080i
1080p
1080p
60 (30)
50 (25)
60
50
B. HDMI Digital
1
HDMI - PC Signal
Modes
VGA
Resolution
640x480
640x480
640x480
640x480
800x600
800x600
800x600
800x600
800x600
V.Frequency [Hz] H.Frequency [KHz]
60
72
75
85
56
60
72
75
85
31.5
37.9
37.5
43.3
35.1
37.9
48.1
46.9
53.7
SVGA
Download from Www.Somanuals.com. All Manuals Search And Download.
30
XGA
1024x768
1024x768
1024x768
1024x768
1152x864
1152x864
1152x864
1280x1024
1280x1024
1280x1024
1280x960
1280x960
1400x1050
640x480
60
70
48.4
56.5
60.0
68.7
63.8
67.5
77.1
64.0
77.0
80.0
60.0
75.2
65.3
31.4
34.9
37.9
48.4
68.7
75.0
60.0
75
85
SXGA
70
75
85
60
72
75
QuadVGA
60
75
SXGA+
60
PowerBook G4
PowerBook G4
PowerBook G4
PowerBook G4
PowerBook G4
PowerBook G4
i Mac DV (G3)
60
640x480
66.6 (67)
60
800x600
1024x768
1152x870
1280x960
1024x768
60
75
75
75
2
HDMI - Extended Wide timing
Modes
WXGA
Resolution
V.Frequency [Hz] H.Frequency [KHz]
1280x768
1280x768
60
75
85
60
60
60
60
47.8
60.3
68.6
44.8
49.6
59.9
65.3
1280x768
1280x720
1280x800
1440x900
WSXGA+
1680x1050
1920x1080
(Reduced Blanking
Timing)
60
60
66.6
47.7
1366x768
Download from Www.Somanuals.com. All Manuals Search And Download.
31
3
HDMI - Video Signal
Modes
480i
576i
Resolution
V.Frequency [Hz] H.Frequency [KHz]
720x480(1440x480)
720x576(1440x576)
720x480
59.94 (29.97)
15.7
15.6
31.5
31.3
45.0
37.5
33.8
28.1
67.5
56.3
50 (25)
59.94
50
480p
576p
720p
720p
1080i
1080i
1080p
1080p
720x576
1280x720
1280x720
1920x1080
1920x1080
1920x1080
1920x1080
60
50
60 (30)
50 (25)
60
50
Graphic source
monitor range
limits
Horizontal scan rate:
30k~100kHz
Vertical scan rate:
Max. pixel rate
50~85Hz
150MHz
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Regulations and safety notices
FCC notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio and TV
reception.
Caution
Changes or modifications not expressly approved by the manufacturer could
void the user's authority, which is granted by the Federal Communications
Commission, to operate this device.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Remarque à l'intention des utilisateurs canadiens
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du
Canada.
Declaration of Conformity for EU countries
Acer hereby declares that this projector series is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Compliant with Russian regulatory certification
Radio device regulatory notice
Note: The regulatory information below is for models with
wireless LAN and/or Bluetooth only.
General
This product complies with the radio frequency and safety standards of any
country or region in which it has been approved for wireless use. Depending on
configurations, this product may or may not contain wireless radio devices (such
as wireless LAN and/or Bluetooth modules). The below information is for
products with such devices.
Canada — Low-power license-exempt radio
communication devices (RSS-210)
a
Common information
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
b
Operation in 2.4 GHz band
To prevent radio interference to the licensed service, this device is
intended to be operated indoors and installation outdoors is subject
to licensing.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
List of applicable countries
This device must be used in strict accordance with the regulations and constraints in the
country of use. For further information, please contact the local office in the country of use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih
Taipei Hsien 221, Taiwan
Declaration of Conformity
We,
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan
Contact Person: Mr. Easy Lai, e-mail:[email protected]
And,
Acer Europe SA
Via Cantonale, Centro Galleria 2 6928 Manno Switzerland
Hereby declare that:
Product:
Projector
Acer
Trade Name:
Model Number: DSV0920
Machine Type:
K11
Is compliant with the essential requirements and other relevant provisions of the following EC
directives, and that all the necessary steps have been taken and are in force to assure that
production units of the same product will continue comply with the requirements.
EMC Directive 2004/108/EC as attested by conformity with the following
harmonized standards:
-. EN55022, AS/NZS CISPR22, Class B
-. EN55024
-. EN61000-3-2 Class A
-. EN61000-3-3
Low Voltage Directive 2006/95/EC as attested by conformity with the following
harmonized standard:
-. EN60950-1
RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous
Substances in Electrical and Electronic Equipment
-. The maximum concentration values of the restricted substances by weight in homogenous
material are:
Lead
Mercury
Hexavalent Chromium
0.1% Polybrominated Biphenyls (PBB’s)
0.1% Polybrominated Diphenyl Ethers (PBDE’s) 0.1%
0.1% Cadmium 0.01%
0.1%
!
Directive 2009/125/EC with regard to establishing a framework for the setting
of ecodesign requirements for energy-related product.
Download from Www.Somanuals.com. All Manuals Search And Download.
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih
Taipei Hsien 221, Taiwan
The standards listed below are applied to the product if built with WLAN
module or wireless keyboard and mouse.
R&TTE Directive 1999/5/EC as attested by conformity with the following
harmonized standard:
z Article 3.1(a) Health and Safety
-. EN60950-1
-. EN62311
z Article 3.1(b) EMC
-. EN301 489-1
-. EN301 489-17
z Article 3.2 Spectrum Usages
-. EN300 328
-. EN301 893 (Applicable to 5GHz high performance RLAN).
Year to begin affixing CE marking 2010.
_______________________________
Easy Lai /Manager
Mar. 22, 2010
Date
-
Regulation Center, Acer Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Acer America Corporation
333 West San Carlos St., San Jose
CA 95110, U. S. A.
Tel : 254-298-4000
Fax : 254-298-4147
Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
The following local Manufacturer / Importer is responsible for this declaration:
Product:
DLP Projector
DSV0920
Model Number:
Machine Type:
K11 series
Name of Responsible Party:
Acer America Corporation
Address of Responsible Party: 333 West San Carlos St.
San Jose, CA 95110
U. S. A.
Contact Person:
Phone No.:
Fax No.:
Acer Representative
254-298-4000
254-298-4147
Download from Www.Somanuals.com. All Manuals Search And Download.
|