Acer Projector
H7531D Series
User's Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
Information for your safety and
comfort
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Turning the product off before cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Caution for plug as disconnecting device
Observe the following guidelines when connecting and disconnecting power to
the external power supply unit:
•
Install the power supply unit before connecting the power cord to the AC
power outlet.
•
•
Unplug the power cord before removing the power supply unit from the
projector.
If the system has multiple sources of power, disconnect power from the
system by unplugging all power cords from the power supplies.
Caution for Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the power cord from the
electrical outlet.
Warnings!
•
•
Do not use this product near water.
Do not place this product on an unstable cart, stand or table. If the product
falls, it could be seriously damaged.
•
Slots and openings are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat register, or
in a built-in installation unless proper ventilation is provided.
•
Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
iv
•
•
To avoid damage of internal components and to prevent battery leakage,
do not place the product on a vibrating surface.
Never use it under sporting, exercising, or any vibrating environment
which will probably cause unexpected short current or damage rotor
devices, lamp.
Using electrical power
•
This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
•
•
Do not allow anything to rest on the power cord. Do not locate this
product where people will walk on the cord.
If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.
•
•
Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.
This product's AC adapter is equipped with a three-wire grounded plug.
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the AC adapter plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.
Warning! The grounding pin is a safety feature. Using a power outlet that is
not properly grounded may result in electric shock and/or injury.
Note: The grounding pin also provides good protection from unexpected
noise produced by other nearby electrical devices that may interfere with
the performance of this product.
•
Use the product only with the supplied power supply cord set. If you need
to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, VDE
approved or its equivalent, 4.6 meters (15 feet) maximum length.
Download from Www.Somanuals.com. All Manuals Search And Download.
v
Product servicing
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:
•
•
•
•
•
the power cord or plug is damaged, cut or frayed
liquid was spilled into the product
the product was exposed to rain or water
the product has been dropped or the case has been damaged
the product exhibits a distinct change in performance, indicating a need
for service
•
the product does not operate normally after following the operating
instructions
Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to normal condition.
Warning! For safety reasons, do not use non-compliant parts when adding
or changing components. Consult your reseller for purchase options.
Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.
Additional safety information
•
Do not look into the projector's lens when the lamp is on. The bright may
hurt your eyes.
•
•
Turn on the projector first and then signal sources
Do not place the product in following environments:
•
•
•
Space that is poorly ventilated or confined. At least 50cm clearance from walls
and free flow of air around the projector is necessary.
Locations where temperatures may become excessively high, such as inside of a
car with all windows rolled up.
Locations where excessive humidity, dust, or cigarette smoke may contaminate
optical components, shortening the life span and darkening the image.
•
•
•
Locations near fire alarms.
Locations with an ambient temperature above 40 ºC/104 ºF.
Locations where the altitudes are higher than 10000 feet.
•
Unplug immediately if there is something wrong with your projector. Do
not operate if smoke, strange noise or odor comes out of your projector. It
might cause fire or electric shock. In this case, unplug immediately and
Download from Www.Somanuals.com. All Manuals Search And Download.
vi
contact your dealer.
•
Do not keep using this product to break or drop it. In this case contact your
dealer for inspection.
•
•
Do not face the projector lens to the sun. It can lead to fire.
When switching the projector off, suggest to ensure the projector
completes its cooling cycle before disconnecting power.
Do not turn off the main power abruptly or unplug the projector during
operation. It can lead to lamp breakage, fire, electric shock or other
trouble. The best way is to wait for the fan to turn off before turning main
power off.
•
•
•
Do not touch air outlet grille and bottom plate which becomes hot.
Clean the air filter frequently if have. The temperature inside may rise and
cause damage when the filter/ventilation slots clogged with dirt or dust.
Do not look into the air outlet grille when projector is operating. It may
hurt your eyes.
Always open the lens shutter or remove the lens cap when the projector is
on.
Do not block the projector lens with any object when the projector is
under operation as this could cause the object to become heated and
deformed or even cause a fire. To temporarily turn off the lamp, press HIDE
on the projector or remote controller.
•
•
•
•
The lamp becomes extremely hot during operation. Allow the projector to
cool for approximately 45 minutes prior to removing the lamp assembly for
replacement.
•
•
•
Do not operate lamps beyond the rated lamp life. It could cause it to break
on rare occasions.
Never replace the lamp assembly or any electronic components unless the
projector is unplugged.
The product will detect the life of the lamp itself. Please be sure to change
the lamp when is showing warning message.
•
•
•
When changing the lamp, please allow unit to cool down, and follow all
changing instructions.
Reset the "Lamp Hour Reset" function from the Onscreen display
"Management" menu after replacing the lamp module.
Do not attempt to disassemble this projector. There are dangerous high
voltages inside which may hurt you. The only user serviceable part is the
lamp which has its own removable cover. Refer servicing only to suitable
qualified professional service personnel.
•
•
Do not stand the projector on end vertically. It may cause the projector to
fall over, causing injury or damage.
This product is capable of displaying inverted images for ceiling mount
installation. Only use acer ceiling mount kit for mounting the projector
and ensure it is securely installed.
Download from Www.Somanuals.com. All Manuals Search And Download.
vii
Caution for Listening
To protect your hearing, follow these instructions.
•
•
•
•
•
Increase the volume gradually until you can hear clearly and comfortably.
Do not increase the volume level after your ears have adjusted.
Do not listen to music at high volumes for extended periods.
Do not increase the volume to block out noisy surroundings.
Decrease the volume if you can't hear people speaking near you.
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize
pollution and ensure utmost protection of the global environment, please
recycle. For more information on the Waste from Electrical and Electronics
Equipment (WEEE) regulations, visit http://www.acer-group.com/public/
Sustainability/sustainability01.htm
Mercury advisory
For projectors or electronic products containing an LCD/CRT monitor or display:
“Lamp(s) contain Mercury,
Dispose Properly.”
Lamp(s) inside this product contain mercury and must be recycled or disposed of
according to local, state or federal laws. For more information, contact the
information, check www.lamprecycle.org
Download from Www.Somanuals.com. All Manuals Search And Download.
viii
First thing first
Usage notes
Do:
•
•
Turn off the product before cleaning.
Use a soft cloth moistened with mild detergent to clean the display
housing.
•
Disconnect the power plug from AC outlet if the product is not being used
for a long period of time.
Don't:
•
•
•
Block the slots and openings on the unit provided for ventilation.
Use abrasive cleaners, waxes or solvents to clean the unit.
Use under the following conditions:
•
•
•
•
In extremely hot, cold or humid environments.
In areas susceptible to excessive dust and dirt.
Near any appliance that generates a strong magnetic field.
Place In direct sunlight.
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user's guide to maximize the life of your unit.
Warning:
•
•
Do not look into the projector's lens when the lamp is on. The bright light may hurt
your eyes.
To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
•
•
Please do not open or disassemble the product as this may cause electric shock.
When changing the lamp, please allow unit to cool down, and follow all changing
instructions.
•
•
•
This product will detect the life of the lamp itself. Please be sure to change the lamp
when it shows warning messages.
Reset the "Lamp Hour Reset" function from the Onscreen display "Management"
menu after replacing the lamp module.
When switching the projector off, please ensure the projector completes its cooling
cycle before disconnecting power.
•
•
•
Turn on the projector first and then the signal sources.
Do not use lens cap when projector is in operation.
When the lamp reaches the end of its life, it will burn out and may make a loud
popping sound. If this happens, the projector will not turn back on until the lamp
module has been replaced. To replace the lamp, follow the procedures listed under
"Replacing the Lamp".
Download from Www.Somanuals.com. All Manuals Search And Download.
Information for your safety and comfort
First thing first
Usage notes
Precautions
Introduction
Product Features
Package Overview
Projector Overview
Projector Outlook
Control Panel
Remote Control Layout
Getting Started
Connecting the Projector
8
Turning the Projector On/Off
Turning on the Projector
8
Turning the projector off
9
Adjusting the Projected Image
Adjusting the Height of Projected Image
10
10
distance and zoom
User Controls
18
20
22
22
25
25
26
Installation menu
Acer Empowering Technology
Color
Image
Management
Setting
Audio
Timer
Language
Appendices
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
27
31
32
33
36
38
LED & Alarm Definition Listing
Replacing the Lamp
Ceiling Mount Installation
Specifications
Compatibility modes
Regulations and safety notices
42
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Introduction
Product Features
®
This product is a single-chip DLP projector. Outstanding
features include:
•
•
DLP® technology
Native 1920 x 1080 1080p resolution
4:3 / 16:9 / L.Box aspect ratio supported
•
Acer ColorBoost technology delivers nature’s true colors for vivid, life-like
images
•
•
High brightness and contrast ratio
Versatile display modes (Bright, Presentation, Standard, Movie, Dark
Cinema, Game, Sports, User) enable optimum performance in any situation
NTSC / PAL / SECAM compatible and HDTV (720p, 1080i, 1080p) supported
Lower power consumption and economy (ECO) mode extends lamp life
•
•
•
Acer EcoProjeciton Technology delivers Intelligent power management
approach and physical efficiency improvement
•
Empowering Key reveals Acer Empowering Technology utilities (Acer
eView, eTimer, ePower Management) for easy adjustment of settings
•
•
•
•
•
•
Equipped with HDMITM connection supporting HDCP
Advanced digital keystone correction optimizes presentations
Multi-language onscreen display (OSD) menus
Full-function remote control
Manual focus projection lens zooms up to 1.2x
8x digital zoom and pan move function
•
Microsoft® Windows® 2000, XP, Vista®, Windows® 7, OS compliant
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Package Overview
This projector comes with all the items shown below. Check to
make sure your unit is complete. Contact your dealer
immediately if any thing is missing.
Projector with lens cap
Power cord
VGA cable
Compostive video cable
Security card
User's Guide
POWER
FREEZE
RESYNC
HIDE
Acer Projector
ASPECT
RATIO
SOURCE
ZOOM
RGB
BRIGHTNESS COLOR CONTRAST
PgUp
PgDn
VGA
DVI
COMPONENT VIDEO
S-VIDEO
Quick Start Guide
HDMI
WIRELESS
MUTE
Remote control
Carrying case
Quick start guide
2 x Batteries
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Projector Overview
Projector Outlook
Front / upper side
1
5
6
7
2
8
5
9
3
4
#
Description
#
Description
1
Ventilation (outlet)
6
Control panel
Zoom lever
2
3
4
5
Focus ring
7
8
9
Zoom lens
Ventilation (inlet)
Speaker
Lens cap
Remote control receiver
Rear side
2
3
4
5
6
7
8
9
10 11
USB
Y
VIDEO
S-VIDEO
VGA IN
HDMI
1
HDMI
2
AUDIO IN
RS232
DC OUT
Pb/Cb
Pr/Cr
1
12
#
Description
#
Description
1
2
3
4
5
6
Power socket
USB connector
YPbPr/YCbCr input connector
7
8
9
HDMI 1 connector
HDMI 2 connector
Audio input connector
RS232 connector
Composite video input connector
S-Video input connector
10
11
12
12V DC output connector
Kensington™ lock port
PC analog signal/HDTV/component
video input connector (VGA IN)
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Control Panel
5
1
2
6
7
3
4
8
9
5
#
Function
Description
1
RESYNC
MENU
Automatically synchronizes the projector to the
input source.
2
•
Press "MENU" to launch the Onscreen display
(OSD) menu, back to the previous step for the
OSD menu operation or exit the OSD menu.
•
Confirm your selection of items.
3
4
LAMP
Lamp Indicator LED.
POWER
Power/Standby/Power Indicator LED.
See the contents in "Turning the Projector On/
Off" section.
5
KEYSTONE
Adjusts the image to compensate for distortion
caused by tilting the projector (± 15 degrees).
6
7
SOURCE
Changes the active source.
Four directional select keys
Use to
select items or make
adjustments to your selection.
8
9
TEMP
Temp Indicator LED.
Empowering key
Unique Acer functions: eView, eTimer, ePower
Management.
Note: When PIP function is activated, zoom and keystone function
is unavailable.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Remote Control Layout
1
2
3
4
5
POWER
6
FREEZE
RESYNC
HIDE
7
8
ASPECT
RATIO
SOURCE
9
ZOOM
26
10
11
12
RGB
BRIGHTNESS COLOR CONTRAST
PgUp
13
14
17
18
21
15
16
PgDn
19
VGA
DVI
COMPONENT VIDEO
S-VIDEO
20
23
HDMI
WIRELESS
MUTE
22
24
25
#
Icon
Function
Infrared
Description
Sends signals to the projector.
1
transmitter
FREEZE
HIDE
2
3
To pause the screen image.
Momentarily turns off the video. Press "HIDE" to hide the
image, press again to display the image.
4
5
6
RESYNC
SOURCE
POWER
Automatically synchronizes the projector to the input source.
Changes the active source.
Refer to the "Turning the Projector On/Off" section.
7
8
9
ASPECT RATIO
ZOOM
To choose the desired aspect ratio (Auto/4:3/16:9/L.Box)
Zooms the projector display in or out.
Empowering key Unique Acer functions: eView, eTimer, ePower Management.
10
11
KEYSTONE
MENU
Adjusts the image to compensate for distortion caused by
tilting the projector (± 15 degrees).
•
Press "MENU" to launch the Onscreen display (OSD) menu,
back to the previous step for the OSD menu operation or
exit the OSD menu.
•
Confirm your selection of items.
12
PAGE
No function.
13
14
15
RGB
BRIGHTNESS
CONTRAST
Press "RGB" for true-color optimization.
Press "BRIGHTNESS" to adjust the brightness of the image.
Use the "CONTRAST" option to control the difference
between the lightest and darkest parts of the picture.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
#
16
17
Icon
Function
COLOR
VGA
Description
Press "COLOR" to adjust the color temperature of image.
Press "VGA" to change source to the VGA connector. This
connector supports analog RGB, YPbPr (480p/576p/720p/
1080i), YCbCr (480i/576i) and RGBsync.
Press "COMPONENT" to change source to Component video.
This connection supports YPbPr (480p/576p/720p/1080p) and
YCbCr (480i/576i/1080i).
18
COMPONENT
19
20
21
22
23
24
25
26
S-VIDEO
VIDEO
DVI
HDMI™
MUTE
WIRELESS
KeyPad 0~9
To change source to S-Video.
To change source to COMPOSITE VIDEO.
No function.
To change source to HDMI™.
To turn on/off the volume.
No function.
Press "0~9" to input a password in the "Security settings".
Four directional Use up, down, left, right buttons to select items or make
select keys adjustments to your selection.
Note: When PIP function is activated, zoom and keystone function
is unavailable.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Getting Started
Connecting the Projector
USB
S-Video Output
Video Output
D-Sub
Y
5
2
9
Y
8
3
11
D-Sub
USB
Y
VIDEO
S-VIDEO
VGA IN
HDMI
1
HDMI
2
AUDIO IN
RS232
DC OUT
Pb/Cb
Pr/Cr
6
R
B
G
HDTV adapter
HDMI
R
B G
4
1
10
RS232
7
7
6
HDMI
RS232
DVD player
R
B G
R
B G
DVD player,
Set-top Box,
HDTV receiver
R
W
#
Description
#
Description
1
Power cord
USB cable
7
8
9
3 RCA component cable
S-Video cable
2
3
4
5
6
VGA cable
HDMI cable
Composite video cable
10 Audio cable Jack/RCA
11 12V DC Cable
Audio cable jack/jack
RS232 cable
Note: To ensure the projector works well with your computer,
please make sure the timing of the display mode is compatible
with the projector.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Turning the Projector On/Off
Turning on the Projector
1
2
Remove the lens cap.(Illustration #1)
Ensure that the power cord and signal cable are securely connected. The
Power indicator LED will flash red.
3
4
Turn on the projector by pressing "Power" button on the control panel,
and the Power indicator LED will turn blue.(Illustration #2)
Turn on your source (computer, notebook, video player ,etc.). The
projector will detect your source automatically.
•
•
•
If the screen displays "Lock" and "Source" icons, it means the projector is locked
onto a specific source type and there is no such type of input signal detected.
If the screen displays "No Signal", please make sure the signal cables are
securely connected.
If you connect to multiple sources at the same time, use the "Source" button on
either control panel or the remote control or direct source key on the remote
control to switch between inputs.
POWER
FREEZE
RESYNC
HIDE
2
Power button
ASPECT
RATIO
SOURCE
1
Lens cap
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Turning the projector off
1
2
3
To turn the projector off, press the power button. This message appears:
"Please press the power button again to complete the shutdown process."
Press the power button again.
The LED power indicator will turn RED and blink rapidly after the projector
is turned off, and the fan(s) will continue to operate for about 2 minutes to
ensure that the system cools properly.
As long as the power cord remains plugged in, you can press the power
button to turn the projector immediately back on anytime during the 2-
minute shutdown process.
4
5
Once the system has finished cooling, the LED power indicator will stop
blinking and turn solid red to indicate standby mode.
It is now safe to unplug the power cord.
Warning indicators:
•
•
"Projector Overheated. Lamp will automatically turn off soon."
This onscreen message indicates that the projector has overheated.
The lamp with automatically turn off, the projector will automatically
shut down, and the LED temp indicator will turn solid red. Contact
your local dealer or service center.
"Fan failed. Lamp will automatically turn off soon."
This onscreen message indicates that the fan has failed. The lamp will
automatically turn off, the projector will automatically shut down,
and the LED temp indicator will blink. Contact your local dealer or
service center.
Note: Whenever the projector automatically shuts down and the
LED lamp indicator turns solid red, contact your local reseller or
service center.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Adjusting the Projected Image
Adjusting the Height of Projected Image
The projector is equipped with elevator feet for adjusting the height of image.
To raise the image:
1
2
Press the elevator foot release. (Illustration #1)
Raise the image to the desired height angle (Illustration #2), then release
the button to lock the elevator foot into position.
3
Use Tilt adjusting wheel (Illustration #3) to fine-tune the display angle.
To lower the image:
1
2
Press the elevator foot release. (Illustration #1)
Lower the image to the desired height angle (Illustration #2) , then release
the button to lock the elevator foot into position.
3
Use Tilt adjusting wheel (Illustration #3) to fine-tune the display angle.
1
Elevator foot
release button
3
2
3
Tilt adjusting wheel
Elevator foot
Tilt adjusting wheel
Download from Www.Somanuals.com. All Manuals Search And Download.
11
How to optimize image size and distance
Consult the table below to find the optimal image sizes achievable when the
projector is positioned at a desired distance from the screen. Example: If the
projector is 3 m from the screen, good image quality is possible for image sizes
between 74" and 90".
Note: Remind as below figure, the space of 130 cm height is
required when located at 3m distance.
90"
B
Height: 130cm
Form base to
top of image
Height:
107cm
C
A
3m Desired Distance
Figure: Fixed distance with different zoom and screen size.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Screen size
(Min zoom)
Top
Screen size
(Max zoom)
Top
Desired
Distance
(m)
From base
to top of
image (cm)
<C>
From base to
top of image
(cm)
Diagonal
(inch) W (cm) x H (cm)
<B>
Diagonal
(inch) W (cm) x H (cm)
<B>
<A>
<C>
1.5
2
37
49
82 x 46
109 x 61
53
45
60
99 x 56
65
71
132 x 75
86
2.5
3
62
137 x 77
89
75
166 x 93
108
130
151
173
194
216
259
302
346
389
423
74
164 x 92
107
125
143
160
178
214
250
285
321
357
90
199 x 112
232 x 130
265 x 149
298 x 168
331 x 186
397 x 224
464 x 261
530 x 298
596 x 335
662 x373
3.5
4
86
191 x 108
219 x 123
246 x 138
273 x 154
328 x 184
383 x 215
437 x 246
492 x 277
546 x 3 07
105
120
135
150
179
209
239
269
299
99
4.5
5
111
123
148
173
197
222
247
6
7
8
9
10
Zoom Ratio: 1.2x
Download from Www.Somanuals.com. All Manuals Search And Download.
13
How to get a preferred image size by adjusting
distance and zoom
A
60"
Desired
image size
D
Height: 87cm
Form base to
top of image
2 m
B
2.4 m
Desired Distance
C
The table below shows how to achieve a desired image size by adjusting either
the position or the zoom ring. For example: to obtain an image size of 60" set
the projector at a distance 2.0 m and 2.4 m from the screen and adjust the zoom
level accordingly.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Desired Image Size
Distance (m)
Top (cm)
From base to top of
Diagonal (inch)
Max zoom
Min zoom
<C>
W (cm) x H (cm)
image
<D>
<A>
<B>
1.0
1.3
1.7
2.0
2.3
2.7
3.0
3.3
4.0
5.0
6.0
6.7
8.4
10.0
30
66 x 37
89 x 50
1.2
1.6
2.0
2.4
2.8
3.2
3.6
4.1
4.9
6.1
7.3
8.1
10.1
***
43
40
58
50
111 x 62
133 x 75
155 x 87
177 x 100
199 x 112
221 x 125
266 x 149
332 x 187
398 x 224
443 x 249
553x 311
664 x 374
72
60
87
70
101
116
130
144
173
217
260
289
361
433
80
90
100
120
150
180
200
250
300
Zoom Ratio: 1.2x
Download from Www.Somanuals.com. All Manuals Search And Download.
15
User Controls
Installation menu
The installation menu provides an onscreen display (OSD) for projector
installation and maintenance. Use the OSD only when the message "No signal
input" is displayed on the screen.
The menu options include settings and adjustments for screen size and distance,
focus, keystone correction and more.
1
2
Turn on the projector by pressing "Power" button on the control pad.
Press the "MENU" button on the control pad to launch the OSD for
projector installation and maintenance.
3
4
The background pattern acts as a guide to adjusting the calibration and
alignment settings, such as screen size and distance, focus and more.
The Installation menu includes the following options:
•Projection method
•Projection location
•Menu location
•Keystone settings
•Language settings
•Reset to factory default function
Use the up and down arrow keys to select an option, the left and right
arrow keys to adjust selected option settings, and the right arrow key to
enter a submenu for feature setting. The new settings will be saved
automatically upon exiting the menu.
5
Push the menu button anytime to exit the menu and return to the Acer
welcome screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Acer Empowering Technology
Acer Empowering Key provide three
Acer unique functions, they are "Acer
eView Management", "Acer eTimer
Management" and "Acer ePower
Empowering
Key
Management" respectively. Press "
"
key for more than one second to launch
the Onscreen display main menu to
modify its function.
Acer eView Management
Press " " to launch "Acer eView
Management" submenu.
"Acer eView Management" is for
display mode selection. Please refer to
Onscreen Display Menus section for
more detail.
Acer eTimer Management
Acer ePower Management
Press " " to launch "Acer eTimer
Management" submenu.
"Acer eTimer Management" provides
the reminding function for presentation
time control. Please refer to Onscreen
Display Menus section for more detail.
Press " " to launch "Acer ePower
Management".
"Acer ePower Management" provides
user one shortcut to save lamp and
projector life. Please refer to Onscreen
Display section for more detail.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Onscreen Display (OSD) Menus
The projector has multilingual OSD that allow you to make image adjustments
and change a variety of settings.
Using the OSD menus
•
To open the OSD menu, press "MENU" on the remote control or control
panel.
•
When the OSD is displayed, use the
keys to select any item in the
main menu. After selecting the desired main menu item, press
submenu for feature setting.
to enter
•
Use the
keys to select the desired item and adjust the settings by
keys.
using the
•
•
•
Select the next item to be adjusted in the submenu and adjust as described
above.
Press "MENU" on the remote control or control panel, the screen will
return to the main menu.
To exit OSD, press "MENU" on the remote control or control panel again.
The OSD menu will close and the projector will automatically save the new
settings.
Main menu
Setting
Sub menu
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Color
There are many factory presets optimized for various types of
images.
Display Mode
•
•
Bright: For brightness optimization.
Presentation: For meeting presentation with higher
brightness.
•
•
•
•
•
•
Standard: For common environment.
Movie: For brighter and general movie/video/photo playing.
Dark Cinema: For dark movie content.
Game: For game content.
Sports: For sport picture.
User: Memorize user’s settings.
Use this function to choose a proper color according to the wall.
There are several choices, including white, light yellow, light blue,
pink, dark green. It will compensate the color deviation due to the
wall color to show the correct image tone.
Wall Color
Brightness
Adjust the brightness of the image.
•
•
Press
Press
to darken image.
to lighten the image.
"Contrast" controls the difference between the lightest and
darkest parts of the picture. Adjusting the contrast changes the
amount of black and white in the image.
Contrast
•
•
Press
Press
to decrease the contrast.
to increase the contrast.
Adjust the color temperature. At higher color temperatures, the
screen looks colder; at lower color temperatures, the screen looks
warmer.
Color
Temperature
Effects the representation of dark scenery. With greater gamma
value, dark scenery will look brighter.
Degamma
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Sharpeness
Adjusts the sharpness of the image.
Advanced
•
Press
Press
to decrease the sharpness.
to increase the sharpness.
•
Brilliant Color
Produces an expanded on-screen color spectrum that delivers
enhanced color saturation for bright, true-to-life images. This
feature is "On" by default.
Dynamic Black
This feature enables the projector to automatically optimize the
display of dark movie scenes enabling them to be shown in
incredible detail.
Color R
Adjusts the red color.
Color
Management
Color G
Adjusts the green color.
Color B
Adjusts the blue color.
Color C
Adjusts the cyan color.
Color M
Adjusts the magenta color.
Color Y
Adjusts the yellow color.
Skin Color
Adjusts the skin color.
Adjusts a video image from black and white to fully saturated
color.
Saturation
Tint
•
•
Press
Press
to decrease the amount of color in the image.
to increase the amount of color in the image.
Adjusts the color balance of red and green.
•
•
Press
Press
to increase the amount of green in the image.
to increase the amount of red in the image.
Adjust the color range of the HDMI image data to correct color
display error.
HDMI Color
Range
•
•
Auto: Automatically adjust by information from player.
Limited Range: Prosess the input image as limited color range
data.
•
Full Range: Prosess the input image as full color range data.
Note: "Saturation" and "Tint" functions are not supported under computer
mode or HDMI mode.
Note: "HDMI Color Range" function is only supported under DVI mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Image
Projection mode
•
•
Front: The factory default setting.
Rear: Reverses the image so you can project from behind a
translucent screen.
Projection
Location
•
•
Auto: Automatically adjusts projection location of image.
Desktop: Select this function when the projector is placed on the
desk.
•
Ceiling: Turns the image upside down for ceiling-mounted
projection.
Aspect Ratio
Use this function to choose your desired aspect ratio.
•
•
•
•
Auto: Keep the image with original width-higth ratio and maxi
mize the image to fit native horizontal or vertical pixels.
4:3: The image will be scaled to fit the screen and displayed using
a 4:3 ratio.
16:9: The image will be scaled to fit the width of the screen and
the height adjusted to display the image using a 16:9 ratio.
L. Box: Keep original signal aspect ratio and zoom in by 1.333
times.
Auto Keystone
Keystone
Automatically adjusts vertical image.
Adjust image distortion caused by tilting projection. (±15 degrees)
<Note> The Manual Keystone funcion is unavailable under Auto
Keystone setting to "On".
Download from Www.Somanuals.com. All Manuals Search And Download.
21
H. Position
(Horizontal
position)
•
•
Press
Press
to move the image left.
to to move the image right.
V. Position
(Vertical position)
•
•
Press
Press
to move the image down.
to move the image up.
Frequency
"Frequency" changes the projector's refresh rate to match the
frequency of your computer’s graphics card. If you can see a vertical
flickering bar in the projected image, use this function to make the
necessary adjustments.
Tracking
Synchronizes the signal timing of the projector with the graphics card.
If you experience an unstable or flickering image, use this function to
correct it.
HDMI Scan Info
Adjust the overscan ratio of the HDMI image on screen.
•
•
•
Auto: Automatically adjust by information from player.
Underscan: Always no overscan on HDMI image.
Overscan: Always keep overscan on HDMI image.
Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions
are not supported under HDMI or Video mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Management
ECO Mode
Choose "On" to dim the projector lamp which will lower power
consumption, extend the lamp life and reduce noise. Choose "Off"
to return normal mode.
High Altitude
Auto Shutdown
Choose "On" to turn on High Altitude mode. Operate the fans at
full speed continuously to allow for proper high altitude cooling of
the projector.
The projector will automatically shutdown when there is no signal
input after the allocated time. (in minutes)
Lamp Hour Elapse
Lamp Reminding
Displays the lamp’s elapsed operating time (in hours).
Activate this function to display a reminder to change the lamp 30
hours before its expected end-of-life.
Lamp Hour Reset
Press the
button and choose "Yes" to turn the lamp hour
counter to 0 hours.
Setting
Menu Location
Closed Caption
Choose the menu location on the display screen.
Selects a preferred closed captioning mode from CC1, CC2, CC3,
CC4, (CC1 displays captions in the primary language in your area).
Select "Off" to turn off the captioning feature. This function is only
available when a composite video or S-Video input signal is
selected and its system format is NTSC.
<Note> Set your screen aspect ratio to 4:3. This function is not
available when the aspect ratio is "16:9" or "Auto" .
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Security
Security
This projector provides a useful security function for the
administrator to manage usage of the projector .
Press
to change the "Security" setting. If the security function
is enabled, your must enter the "Administrator Password" first
before changing the security settings.
•
Select "On" to enable the security function. The user has to
enter a password to operate the projector. Please refer to the
"User Password" section for details.
•
If "Off" is selected, then the user can turn on the projector
without password.
Timeout(Min.)
Once "Security" is activated to "On", the administrator can set
timeout function.
•
Press
or
to select the timeout interval.
•
•
The range is from 10 minute to 990 minutes.
When the time is up, the projector will prompt the user to
enter the password again.
•
•
The factory default setting of "Timeout(Min.)" is "Off".
Once the security function is enabled, the projector will
request user to enter password when switch on the projector .
Both "User Password" and "Administrator Password" can be
accepted for this dialogue.
User password
•
•
Press
to setup or change the "User Password".
Press number keys to set your password on the remote control
and press "MENU" to confirm.
•
•
Press
to delete character.
Enter the password when you see "Confirm Password"
displayed.
•
•
The password should be between 4 and 8 characters long.
If you select "Request password only after plugging power
cord", the projector will prompt the user to enter the
password every time the power cord is plugged.
•
If you select "Always request password while projector turns
on", the user has to enter the password every time when the
projector is turned on.
Note: This screen capture function is limited by 4:3 aspect ratio only.
Note: For XGA models, to get best quality for you desired image, suggest
end-user set PC resolution to 1024 x 768 before you use this function.
Note: For SVGA models, to get best quality for you desired image, suggest
end-user set PC resolution to 800 x 600 before you use this function.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Administrator Password
The "Administrator Password" can be used in both the "Enter
Administrator Password" and "Enter Password" dialog boxes.
•
•
Press
to change the "Administrator Password".
The factory default of "Administrator Password" is "1234".
If you forgot your administrator password, do the following to
retrieve the administrator password:
•
An unique 6-digit "Universal Password" which is printed on
the Security Card (please check accessory in the box). This
unique password is the number which will be accepted by
projector anytime no matter what the Administrator
Password is.
•
If losing this security card and number, please contact with an
Acer service center.
Auto Screen
Reset
Default is "On", the down/up move of electronic screen will be
related with power on/off of Projector.
•
Press the
button and choose "Yes" to return the
parameters on all menus to the factory default settings.
Choose "On" to see two screens at the same time.
Choose "Off" to disable the function.
PIP
•
•
PIP Source
Press
and
to choose the secondary video source:
Composite, S-Video or Component signal.
PIP Location
PIP Size
Choose the PIP secondary signal location on the display screen.
Choose the PIP secondary signal size on the display screen.
Note: When PIP function is activated, zoom and keystone function
is unavailable.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Audio
Volume
Mute
•
•
Press
Press
to decrease the volume.
to increase the volume.
•
•
Choose "On" to mute the volume.
Choose "Off" to restore the volume.
Power On/Off Volume
Alarm Volume
•
Select this function to adjust the notification volume when
turning the projector on/off.
•
Select this function to adjust the volume of any warning
notifications.
Timer
Timer Location
Timer Start
•
•
Choose the location of the timer on the screen.
Press
Press
to start or stop the timer.
or to adjust the timer period.
Timer Period
•
•
Timer Volume
Select this function to adjust the notification volume when
the timer function is enabled and time is up.
Timer Display
•
Press
or
to which timer mode to display on the
screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Appendices
Troubleshooting
If you experience a problem with your Acer projector, refer to the following
troubleshooting guide. If the problem persists, please contact your local reseller
or service center.
Image Problems and Solutions
#
Problem
Solution
1
No image appears
onscreen
•
•
•
Connected as described in the "Getting Started"
section.
Ensure none of the connector pins are bent or
broken.
Check if the projector lamp has been securely
installed. Please refer to the "Replacing the Lamp"
section.
•
Make sure you have removed the lens cap and the
projector is switched on.
2
Partial, scrolling
or incorrectly
displayed
image(For PC
(Windows 95/98/
2000/XP))
•
•
Press "RESYNC" on the remote control or control
panel.
For an incorrectly displayed image:
•
Open "My Computer," open the "Control
Panel," and then double-click the "Display"
icon.
•
•
Select the "Settings" tab.
Verify that your display resolution setting is
lower than or equal to UXGA (1600 x 1200).
Click the "Advanced Properties" button.
•
If the problem still appears, change the monitor display
you are using and follow the steps below:
•
•
•
Verify that the resolution setting is lower than
or equal to UXGA (1600 x 1200).
Click the "Change" button under the
"Monitor" tab.
Click "Show all devices". Next, select "Standard
monitor types" under the SP box, and choose
the resolution mode you need under the
"Models" box.
•
Verify that the resolution setting of the
monitor display is lower than or equal to UXGA
(1600 x 1200).
Download from Www.Somanuals.com. All Manuals Search And Download.
28
3
Partial, scrolling
or incorrectly
displayed image
(For notebooks)
•
•
Press "RESYNC" on the remote control or control
panel.
For an incorrectly displayed image:
•
Follow the steps for item 2 (above) to adjust
the resolution of your computer.
•
Press the toggle output settings. Example:
[Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8],
Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4],
NEC [Fn]+[F3], Toshiba [Fn]+[F5 ]
•
•
If you experience difficulty changing resolutions or
your monitor freezes, restart all equipment
including the projector.
®
®
4
The screen of the
notebook
computer is not
displaying your
presentation
If you are using a Microsoft Windows based
notebook: Some notebook PCs may deactivate their
own screens when a second display device is in use.
Each has a different way to be reactivated. Refer to
your computer's manual for detailed information.
®
®
•
If you are using an Apple Mac OS based
notebook: In System Preferences, open Display and
select Video Mirroring "On".
5
6
Image is unstable
or flickering
•
•
Adjust the "Tracking" to correct it. Refer to the
"Image" section for more information.
Change the display color depth settings on your
computer.
Image has vertical
flickering bar
•
•
Use "Frequency" to make an adjustment. Refer to
the "Image" section for more information.
Check and reconfigure the display mode of your
graphics card to make it compatible with the
projector.
7
8
Image is out of
focus
•
•
•
Make sure the lens cap is removed.
Adjusts the focus ring on the projector lens.
Make sure the projection screen is within the
required distance of 4.9 to 32.9 feet (1.5 to 10.0
meters) from the projector. Refer to the "How to
Get a Preferred Image Size by Adjusting Distance
and Zoom" section for more information.
Image is stretched
when displaying a
"widescreen"
DVD title
When you play a DVD encoded in anamorphic or 16:9
aspect ratio you may need to adjust the following
settings:
•
If you play a 4:3 format DVD title, please change the
format to 4:3 in the projector OSD.
•
If the image is still stretched, you will also need to
adjust the aspect ratio. Set up the display format to
16:9 (wide) aspect ratio on your DVD player.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
9
Image is too small
or too large
•
•
Adjust the zoom ring on the top of the projector.
Move the projector closer to or further from the
screen.
•
Press "MENU" on the remote control or on the
control panel. Go to "Image --> Aspect Ratio" and
try different settings.
10
11
Image has slanted
sides
•
•
If possible, reposition the projector so that it is
centered on the screen.
Press the "Keystone
/
" on the OSD or the
remote control until the sides are vertical.
Image is reversed
•
Select "Image --> Projection" on the OSD and adjust
the projection direction.
Problems with the Projector
#
Condition
Solution
1
The projector stops responding
to all controls
If possible, turn off the projector, then
unplug the power cord and wait at least 30
seconds before reconnecting power.
2
Lamp burns out or makes a
popping sound
When the lamp reaches the end of its useful
life, it will burn out and may make a loud
popping sound. If this happens, the projector
will not turn on until the lamp module has
been replaced. To replace the lamp, follow
the procedures in the "Replacing the Lamp"
section.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
OSD Messages
#
Condition
Message
Message Reminder
1
Fan Fail - the system fan is not working.
Projector Overheated - the projector has exceeded its
recommended operating temperature and must be allowed to
cool down before it may be used.
Replace the lamp - the lamp is about to reach its maximum
lifetime. Prepare to replace it soon.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
LED & Alarm Definition Listing
LED Messages
Lamp LED
Temp LED
Power LED
Red
Message
Red
--
Red
--
Blue
--
Standby
V
(power cord plugged in)
Power button ON
Lamp retry
--
--
--
--
--
--
V
Quick
flashing
Turning off
(cooling state)
--
--
--
--
V
Quick
flashing
--
--
Turning off
(cooling completed)
V
Error (thermal failure)
Error (fan lock failure)
--
--
--
--
V
V
Quick
flashing
Error (lamp breakdown)
Error (color Wheel fail)
V
--
--
--
--
V
V
Quick
flashing
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Replacing the Lamp
Use a screwdriver to remove the screw(s) from the cover, and then pull out the
lamp.
The projector will detect the lamp life. You will be shown a warning message
"Lamp is approaching the end of its useful life in full power operation.
Replacement Suggested!" When you see this message, change the lamp as soon
as possible. Make sure the projector has been cooling down for at least 30
minutes before changing the lamp.
Warning: The lamp compartment is hot! Allow it to cool down
before changing the lamp.
1
3
2
4
To Change the Lamp
1
2
3
4
5
6
Turn off the projector by pressing the power button.
Allow the projector at least 30 mins to cool down.
Disconnect the power cord.
Use a screwdriver to remove the screw from the cover. (Illustration #1)
Push up and remove the cover.
Remove the three screws that secure the lamp module (Illustration #2) and
pull up the lamp bar.(Illustration #3)
7
Pull out the lamp module by force. (Illustration #4)
To replace the lamp module, reverse the previous step.
Warning: To reduce the risk of personal injury, do not drop the
lamp module or touch the lamp bulb. The bulb may shatter and
cause injury if it is dropped.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Ceiling Mount Installation
If you wish to install the projector using a ceiling mount, please refer to the
steps below:
1
Drill four holes into a solid, structurally sound part of the ceiling, and
secure the mount base.
13
mm
20
mm
49.9
mm
Note: Screws are not included. Please obtain the appropriate
screws for your type of ceiling.
2
Secure the ceiling rod using the appropriate type of four-cylinder screws.
Ceiling Mount Base
- Attach to ceiling
Short Rod
Long Rod
Extension Rod
Long Cylinder Cap
Allen Key
- For tightening/loosening
Screw Type A
50 mm length / 8 mm diameter -
Tightening Screw
Medium Rod
Download from Www.Somanuals.com. All Manuals Search And Download.
34
3
Use the appropriate number of screws for the projector size to attach the
projector to the ceiling mount bracket.
Screw Type B
Smaller Washer
Large Washer
Projector Bracket
Supports projector and allows -
for adjustments
Spacer
- For heat dissipation
Note: It is recommended that you keep a reasonable space
between the bracket and the projector to allow for proper heat
distribution. Use two washers for extra support, if deemed
necessary.
4
Attach the ceiling bracket to the ceiling rod.
Large cylinder cap
Allen Key
- For tightening/loosening
Screw Type A
50 mm length -
Tightening Screw
08 mm diameter
Download from Www.Somanuals.com. All Manuals Search And Download.
35
5
Adjust the angle and positioning as necessary.
Tightening Screw
Allen Key
30°
Allen Key
Tightening Screw
Note: The appropriate type of screw and washer for each model is
listed in the table below. 3 mm diameter screws are enclosed in
the screw pack.
Models
Screw Type B
Diameter (mm)
Washer Type
Length (mm)
25
Large
V
Small
V
H7531D
3
SCREW SPEC. M3 x 25 mm
150.00 mm
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Specifications
The specifications listed below are subject to change without notice. For final
specs, please refer to Acer's published marketing specifications.
®
Projection system
Resolution
DLP
Native: 1080P (1920 x 1080), Maximum: UXGA (1600 x
1200), WSXGA+ (1680x1050)
Computer compatibility
Video compatibility
IBM PC and compatibles, Apple Macintosh, iMac and
VESA standards: SXGA, XGA, VGA, SVGA, SXGA+,
WXGA, WXGA+, WSXGA+
NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/
K/K1/L), HDTV (720p, 1080i, 1080p), EDTV (480p,
576p), SDTV (480i, 576i)
Aspect ratio
Auto, 4:3, 16:9, L.Box
1.07 Billion colors
Displayable colors
Projection lens
F/ 2.55-2.87, f = 22.41mm - 26.82mm, 1.2X manual
zoom lens
Projection screen size (diagonal) 37" (0.94 m) - 300" (7.62 m)
Projection distance
Throw ratio
4.9' (1.5 m) - 32.9' (10.0 m)
60"@2m (1.51 - 1.83:1)
30k - 100kHz
Horizontal scan rate
Vertical refresh scan rate
Lamp type
50 - 85 Hz
230 W user-replaceable lamp
+/- 15 degrees
Keystone correction
Audio
Internal speaker with 2 W x 1 output
3.6kg (8.0lbs.)
Weight
Dimensions (W x D x H)
Digital Zoom
294mm x 229mm x 95mm (11.6" x 9.02" x 3.8")
8X
Power supply
AC input 100 - 240 V, 50 - 60 Hz
Power consumption
305W ± 10% for normal mode
255W ± 10% for ECO mode
Standby< 1W
Operating temperature
I/O connectors
5ºC to 35ºC / 41ºF to 95ºF
•
•
•
•
•
•
•
•
•
•
Power socket x1
VGA input x1
Composite video x1
S-Video x1
3 RCA Component video x1
HDMI x2
3.5 mm audio jack input x1
RS232 3-pin min dim jack x1
USB x1: for remote computer control
DC Jack x1
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Standard package contents
•
•
•
•
•
•
•
•
•
AC power cord x1
VGA cable x1
Composite video cable x1
Remote control x1
Batteries x2 (for remote control)
User's Guide (CD-ROM) x1
Quick start guide x1
Security card x1
Carrying case x1
* Design and specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Compatibility modes
A. VGA Analog
1
VGA Analog - PC Signal
Modes
VGA
Resolution
V.Frequency [Hz] H.Frequency [KHz]
640x480
640x480
60
72
31.5
37.9
37.5
43.3
35.1
37.9
48.1
46.9
53.7
48.4
56.5
60.0
68.7
63.8
67.5
77.1
64.0
77.0
80.0
91.1
60.0
75.2
65.3
75.00
31.5
34.9
37.9
48.4
68.7
75.2
60.3
640x480
75
640x480
85
SVGA
800x600
56
800x600
60
800x600
72
800x600
75
800x600
85
XGA
1024x768
1024x768
1024x768
1024x768
1152x864
1152x864
1152x864
1280x1024
1280x1024
1280x1024
1280x1024
1280x960
1280x960
1400x1050
1600x1200
640x480
60
70
75
85
SXGA
70
75
85
60
72
75
85
QuadVGA
60
75
SXGA+
60
UXGA
60
PowerBook G4
PowerBook G4
PowerBook G4
PowerBook G4
PowerBook G4
PowerBook G4
i Mac DV(G3)
60
640x480
66.6(67)
60
800x600
1024x768
1152x870
1280x960
1024x768
60
75
75
75
Download from Www.Somanuals.com. All Manuals Search And Download.
39
2
VGA Analog - Extended Wide timing
Modes
WXGA
Resolution
V.Frequency [Hz] H.Frequency [KHz]
1280x768
1280x768
1280x768
1280x720
1280x800
1440x900
1680x1050
1366x768
1920x1080
60
75
85
60
60
60
60
60
60
47.8
60.3
68.6
44.8
49.6
55.9
65.3
47.7
67.50
WSXGA+
3
VGA Analog -Component Signal
Modes
Resolution
V.Frequency [Hz] H.Frequency [KHz]
480i
576i
720x480
720x576
59.94(29.97)
50(25)
59.94
50
15.7
15.6
31.5
31.3
45.0
37.5
33.8
28.1
27
480p
576p
720p
720p
1080i
1080i
1080p
1080p
1080p
720x480
720x576
1280x720
1280x720
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
60
50
60(30)
50(25)
23.97/24
60
67.5
56.3
50
B. HDMI Digital
1
HDMI - PC Signal
Modes
VGA
Resolution
V.Frequency [Hz] H.Frequency [KHz]
640x480
640x480
640x480
640x480
800x600
800x600
800x600
800x600
800x600
60
72
75
85
56
60
72
75
85
31.5
37.9
37.5
43.3
35.1
37.9
48.1
46.9
53.7
SVGA
Download from Www.Somanuals.com. All Manuals Search And Download.
40
XGA
1024x768
1024x768
1024x768
1024x768
1152x864
1152x864
1152x864
1280x1024
1280x1024
1280x1024
1280x1024
1280x960
1280x960
1400x1050
1600x1200
640x480
60
70
48.4
56.5
60.0
68.7
63.8
67.5
77.1
64.0
77.0
80.0
91.1
60.0
75.2
65.3
75.00
31.5
34.9
37.9
48.4
68.7
75.2
60.3
75
85
SXGA
70
75
85
60
72
75
85
QuadVGA
60
75
SXGA+
60
UXGA
60
PowerBook G4
PowerBook G4
PowerBook G4
PowerBook G4
PowerBook G4
PowerBook G4
i Mac DV(G3)
60
640x480
66.6(67)
60
800x600
1024x768
1152x870
1280x960
1024x768
60
75
75
75
2
HDMI - Extended Wide timing
Modes
WXGA
Resolution
1280x768
1280x768
1280x768
1280x720
1280x800
1440x900
1680x1050
1366x768
1920x1080
V.Frequency [Hz] H.Frequency [KHz]
60
75
85
60
60
60
60
60
60
47.8
60.3
68.6
44.8
49.6
55.9
65.3
47.7
67.50
WSXGA+
Download from Www.Somanuals.com. All Manuals Search And Download.
41
3
HDMI - Video Signal
Modes
480i
Resolution
V.Frequency [Hz] H.Frequency [KHz]
720x480(1440x480)
720x480
59.94(29.97)
59.94
50(25)
50
15.7
31.5
15.6
31.3
45.0
37.5
33.8
480p
576i
720x576(1440x576)
720x576
576p
720p
720p
1080i
1280x720
60
1280x720
50
1920x1080
60(30)
1080i
1080p
1080p
1920x1080
1920x1080
1920x1080
50(25)
23.97/24
60
28.1
27
67.5
1080p
1920x1080
50
56.3
Horizontal scan
rate:
Graphic source
monitor range
limits
30k-100kHz
Vertical scan rate:
Max. pixel rate
50-85Hz
170MHz
Download from Www.Somanuals.com. All Manuals Search And Download.
42
Regulations and safety notices
FCC notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio and TV
reception.
Caution
Changes or modifications not expressly approved by the manufacturer could
void the user's authority, which is granted by the Federal Communications
Commission, to operate this device.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian ICES-003.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Remarque à l'intention des utilisateurs canadiens
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du
Canada.
Declaration of Conformity for EU countries
Acer hereby declares that this projector series is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Compliant with Russian regulatory certification
Radio device regulatory notice
Note: The regulatory information below is for models with
wireless LAN and/or Bluetooth only.
General
This product complies with the radio frequency and safety standards of any
country or region in which it has been approved for wireless use. Depending on
configurations, this product may or may not contain wireless radio devices (such
as wireless LAN and/or Bluetooth modules).
Canada — Low-power license-exempt radio
communication devices (RSS-210)
a
Common information
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
b
Operation in 2.4 GHz band
To prevent radio interference to the licensed service, this device is
intended to be operated indoors and installation outdoors is subject
to licensing.
List of applicable countries
This device must be used in strict accordance with the regulations and constraints in the
country of use. For further information, please contact the local office in the country of use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih
Taipei Hsien 221, Taiwan
Declaration of Conformity
We,
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan
Contact Person: Mr. Easy Lai, e-mail:[email protected]
And,
Acer Europe SA
Via Cantonale, Centro Galleria 2 6928 Manno Switzerland
Hereby declare that:
Product:
Projector
Acer
Trade Name:
Model Number: M1P0003
Machine Type:
H7531D series
Is compliant with the essential requirements and other relevant provisions of the following EC
directives, and that all the necessary steps have been taken and are in force to assure that
production units of the same product will continue comply with the requirements.
EMC Directive 2004/108/EC as attested by conformity with the following
harmonized standards:
-. EN55022, AS/NZS CISPR22, Class B
-. EN55024
-. EN61000-3-2 Class A
-. EN61000-3-3
Low Voltage Directive 2006/95/EC as attested by conformity with the following
harmonized standard:
-. EN60950-1
RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous
Substances in Electrical and Electronic Equipment
-. The maximum concentration values of the restricted substances by weight in homogenous
material are:
Lead
Mercury
Hexavalent Chromium
0.1% Polybrominated Biphenyls (PBB’s)
0.1% Polybrominated Diphenyl Ethers (PBDE’s) 0.1%
0.1% Cadmium 0.01%
0.1%
!
Directive 2009/125/EC with regard to establishing a framework for the setting
of ecodesign requirements for energy-related product.
Download from Www.Somanuals.com. All Manuals Search And Download.
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih
Taipei Hsien 221, Taiwan
The standards listed below are applied to the product if built with WLAN
module or wireless keyboard and mouse.
R&TTE Directive 1999/5/EC as attested by conformity with the following
harmonized standard:
z Article 3.1(a) Health and Safety
-. EN60950-1
-. EN62311
z Article 3.1(b) EMC
-. EN301 489-1
-. EN301 489-17
z Article 3.2 Spectrum Usages
-. EN300 328
-. EN301 893 (Applicable to 5GHz high performance RLAN).
Year to begin affixing CE marking 2010.
_______________________________
Easy Lai /Manager
Aug. 1, 2010
Date
-
Regulation Center, Acer Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Acer America Corporation
333 West San Carlos St., San Jose
CA 95110, U. S. A.
Tel : 254-298-4000
Fax : 254-298-4147
Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
The following local Manufacturer / Importer is responsible for this declaration:
Product:
DLP Projector
Model Number:
Machine Type:
M1P0003
H7531D series
Name of Responsible Party:
Acer America Corporation
Address of Responsible Party: 333 West San Carlos St.
San Jose, CA 95110
U. S. A.
Contact Person:
Phone No.:
Fax No.:
Acer Representative
254-298-4000
254-298-4147
Download from Www.Somanuals.com. All Manuals Search And Download.
|