Acer Laptop TravelMate 4400 User Manual

TravelMate 4400 Series  
User's Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iii  
First things first  
We would like to thank you for making the TravelMate series of notebook  
computers your choice for meeting your mobile computing needs.  
Your guides  
To help you use your TravelMate, we have designed a set of guides:  
First off, the Just for Starters... poster helps you get started with  
setting up your computer.  
The printed User's Guide introduces you to the basic features and  
functions of your new computer. For more on how your computer  
can help you to be more productive, please refer to the  
AcerSystem User's Guide. This guide contains detailed  
information on such subjects as system utilities, data recovery,  
expansion options, and troubleshooting. In addition it contains  
warranty information and the general regulations and safety  
notices for your notebook. It is available in Portable Document  
Format (PDF) and comes preloaded on your notebook. Follow  
these steps to access it:  
1
2
Click on Start, All Programs, AcerSystem.  
Click on AcerSystem User's Guide.  
Note: Viewing the file requires Adobe Acrobat Reader. If Adobe  
Acrobat Reader is not installed on your computer, clicking on  
AcerSystem User's Guide will run the Acrobat Reader setup  
program first. Follow the instructions on the screen to complete  
the installation. For instructions on how to use Adobe Acrobat  
Reader, access the Help and Support menu.  
Basic care and tips for using your computer  
Turning your computer on and off  
To turn on the computer, simply press and release the power button below the  
LCD screen beside the launch keys. See "Front view" on page 1 for the location  
of the power button.  
To turn the power off, do any of the following:  
Use the Windows shutdown command  
Click on Start, Turn Off Computer, then click on Turn Off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
iv  
Use the power button  
Note: You can also use the power button to perform power  
management functions. See "Moving around" on page 27 of the  
AcerSystem User's Guide.  
Use the customized functions for power management  
You can also shut down the computer by closing the display cover, or by  
pressing the sleep hotkey <Fn> + <F4>. See "Moving around" on page 27  
of the AcerSystem User's Guide.  
Note: If you cannot power off the computer normally, press and  
hold the power button for more than four seconds to shut down  
the computer. If you turn off the computer and want to turn it on  
again, wait at least two seconds before powering up.  
Taking care of your computer  
Your computer will serve you well if you take care of it.  
Do not expose the computer to direct sunlight. Do not place it near sources  
of heat, such as a radiator.  
Do not expose the computer to temperatures below 0 ºC (32 ºF) or above  
50 ºC (122 ºF).  
Do not subject the computer to magnetic fields.  
Do not expose the computer to rain or moisture.  
Do not spill water or any liquid on the computer.  
Do not subject the computer to heavy shock or vibration.  
Do not expose the computer to dust or dirt.  
Never place objects on top of the computer.  
Do not slam the computer display when you close it.  
Never place the computer on uneven surfaces.  
Taking care of your AC adaptor  
Here are some ways to take care of your AC adaptor:  
Do not connect the adaptor to any other device.  
Do not step on the power cord or place heavy objects on top of it.  
Carefully route the power cord and any cables away from foot traffic.  
When unplugging the power cord, do not pull on the cord itself but pull  
on the plug.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
v
The total ampere ratings of the equipment plugged in should not exceed  
the ampere rating of the cord if you are using an extension cord. Also, the  
total current rating of all equipment plugged into a single wall outlet  
should not exceed the fuse rating.  
Taking care of your battery pack  
Here are some ways to take care of your battery pack:  
Use only batteries of the same kind as replacements. Turn the power off  
before removing or replacing batteries.  
Do not tamper with batteries. Keep them away from children.  
Dispose of used batteries according to local regulations. Recycle if possible.  
Cleaning and servicing  
When cleaning the computer, follow these steps:  
1
2
3
Turn off the computer and remove the battery pack.  
Disconnect the AC adaptor.  
Use a soft, moist cloth. Do not use liquid or aerosol cleaners.  
If either of the following occurs:  
the computer has been dropped or the body has been damaged;  
the computer does not operate normally  
Caution  
Changes or modifications not expressly approved by the manufacturer could  
void the user's authority, which is granted by the Federal Communications  
Commission, to operate this computer.  
Operation conditions  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) This device may not cause harmful interference,  
and (2) This device must accept any interference received, including  
interference that may cause undesired operation.  
Users are requested to follow the RF safety instructions for wireless option  
devices that are included in the user's manual of each RF option device.  
An improper installation or unauthorized use may cause harmful interference  
to radio communications. Also, any tampering of the internal antenna will void  
the FCC certification and your warranty.  
To prevent radio interference to the licensed service, this device is intended to  
be operated indoors, and installation outdoors is subject to licensing.  
For more information about our products, services, and support information,  
please visit our website: http://global.acer.com.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
1
A TravelMate tour  
After setting up your computer as illustrated in the Just for Starters... poster, let  
us show you around your new TravelMate computer.  
Front view  
#
1
Item  
Description  
Display screen  
Also called Liquid-Crystal Display (LCD), displays  
computer output.  
2
3
4
5
Power button  
Microphone  
Keyboard  
Turns the computer on and off.  
Internal microphone for sound recording.  
For entering data into your computer.  
Touchpad  
Touch-sensitive pointing device which functions  
like a computer mouse.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
2
#
Item  
Description  
6
Click buttons  
The left and right buttons function like the left  
(left, center and right) and right mouse buttons; the center button  
serves as a 4-way scroll button.  
7
8
Launch keys  
Buttons for launching frequently used programs.  
See "Launch keys" on page 10 for more details.  
Status indicators  
Light-Emitting Diodes (LEDs) that turn on and off  
to show the status of the computer's functions  
and components.  
9
Palmrest  
Comfortable support area for your hands when  
you use the computer.  
Closed front view  
#
1
Icon  
Item  
Description  
Speakers  
Left and right speakers deliver stereo  
audio output.  
2
3
4
Bluetooth  
communication  
button/indicator  
Press to enable/disable Bluetooth  
function. Lights to indicate the status of  
Bluetooth communications  
(manufacturing option).  
Wireless  
communication  
button/indicator  
Press to enable/disable Wireless function.  
Lights to indicate the status of wireless  
LAN communications  
(manufacturing option).  
Line-in/mic-in jack  
Accepts input from external microphones.  
5
6
Speaker-out/line-out/ Connects to audio line-out devices  
headphone jack  
(e.g., speakers, headphones).  
Battery indicator  
Lights when the battery is being charged.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
3
#
7
Icon  
Item  
Description  
Power indicator  
Lights when the computer is on.  
8
Latch  
Locks and releases the lid.  
Left view  
#
1
Icon  
Item  
Description  
Ventilation slots  
Enable the computer to stay cool,  
even after prolonged use.  
2
S-video/TV-out  
port  
Connects to a television or display  
device with S-video input  
(manufacturing option).  
3
4
5
IEEE 1394 port  
3 USB 2.0 ports  
Infrared port  
Connects to IEEE 1394 devices  
(manufacturing option).  
Connects to USB 2.0 devices  
(e.g., USB mouse, USB camera).  
Interfaces with infrared devices like  
infrared printer and IR-aware  
computer (manufacturing option).  
6
7
PC Card slot  
Accepts one Type II PC Card.  
6-in-1 card reader Accepts an MS, MS PRO, MMC, SD,  
SM, or xD-Picture card  
(manufacturing option).  
Note: Only one card can operate at  
any given time.  
8
PC Card slot eject  
button  
Ejects the PC Card from the slot.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
4
Right view  
#
1
Item  
Description  
Optical drive  
Internal optical drive; accepts CDs or DVDs  
depending on the optical drive type.  
2
Optical drive eject button Ejects the optical drive tray from the drive.  
Rear view  
#
1
Icon  
Item  
Description  
Security keylock  
Connects to a Kensington-compatible  
computer security lock.  
2
3
Power jack  
Connects to an AC adaptor.  
Modem jack (RJ-11) Connects to a phone line.  
4
5
6
Network jack  
USB 2.0 port  
Connects to an Ethernet 10/100/1000-  
based network.  
Connects to USB 2.0 devices (e.g., USB  
mouse, USB camera).  
124-pin Acer ezDock Connects to Acer ezDock.  
connector  
(for selected models)  
7
External display port Connects to a display device  
(e.g., external monitor, LCD projector).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
5
#
8
Icon  
Item  
Description  
Ventilation slots  
Enable the computer to stay cool, even  
after prolonged use.  
Base view  
#
1
2
3
Item  
Description  
Wireless LAN bay Houses the computer's wireless LAN.  
Battery lock  
Locks the battery in place.  
Battery release  
latch  
Releases the battery for removal.  
4
5
Battery bay  
Cooling fan  
Houses the computer's battery pack.  
Helps keep the computer cool.  
Note: Do not cover or obstruct the opening of the fan.  
6
Memory and  
hard disk bay  
Houses the computer's main memory and hard disk  
(secured by a screw).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6
Specifications  
Microsoft® Windows® XP Home Edition  
Operating  
system  
Microsoft® Windows® XP Professional  
Microsoft® Windows® XP Professional x64 Edition  
Microsoft® Windows® XP Home Edition N  
Microsoft® Windows® XP Professional Edition N  
AMD Turion64 ML-28/ML-32 processor at 1.6/1.8 GHz or  
higher with 128 KB L1 cache and 512 KB L2 cache, or  
Platform  
AMD Turion64 ML-30/ML-34/ML-37/ML-40 processor at  
1.6/1.8/2.0/2.2 GHz or higher with 128 KB L1 cache and  
1 MB L2 cache, or  
Mobile AMD Sempronprocessor 2600+/3000+ or higher  
with 128 KB L2 cache, or  
Mobile AMD Sempronprocessor 2800+/3100+ or higher  
with 256 KB L2 cache  
ATI RS480M and SB400 chipset  
System memory 256/512 MB of DDR333 memory, upgradeable to 2 GB  
using two soDIMM modules  
Display and  
graphics  
Thin-Film Transistor (TFT) displaying at:  
15" XGA (1024 x 768)  
15" SXGA+ (1400 x1050)  
15.4" WXGA (1280 x 800)  
15.4" WSXGA+ (1680 x 1050)  
16.7 million colors  
ATI MOBILITYRADEON® X600 (for selected models), or  
ATI MOBILITYRADEON® X700 (for selected models)  
Simultaneous LCD and CRT display  
DualViewsupport  
MPEG-2/DVD hardware-assisted capability  
One 40 GB or larger hard disk drive  
Optical drive options:  
Storage  
subsystem  
DVD-Super Multi double layer drive  
DVD-Dual double layer drive  
DVD/CD-RW combo drive  
6-in-1 card reader  
(MS/MS PRO/MMC/SD/SM/xD-Picture Card)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7
Dimensions  
and weight  
363 (W) x 278 (D) x 24.0/32.9 (H) mm  
(14.3 x 10.9 x 0.9/1.3 inches)  
3.07 Kg (6.77 lbs.) for 15.4" LCD model  
Power  
subsystem  
ACPI 1.0b power management standard: supports Standby  
and Hibernation power-saving modes  
60 W Li-ion battery pack  
3.5-hour battery life  
2.5-hour quick-charge; 3.5-hour charge-in-use  
90 W AC adaptor  
Acer FineTouchkeyboard with a 5-degree curve  
Input devices  
Audio  
88-/89-key keyboard  
Touchpad with 4-way integrated scroll button  
Six easy-launch buttons  
Audio system with two built-in speakers  
MS-Sound compatible  
Communication Modem: 56K ITU V.90/V.92 with PTT approval;  
Wake-on-Ring ready  
LAN: gigabit Ethernet (for selected models);  
Wake-on-LAN ready  
WLAN (manufacturing option): integrated 802.11b/g  
dual-mode (for selected models), or 802.11a/b/g dual-band  
tri-mode Wi-Fi CERTIFIEDWLAN solution (for selected  
models); Acer SignalUp wireless technology support  
WPAN (manufacturing option): integrated Bluetooth®  
I/O interface  
Four USB 2.0 ports  
IEEE 1394 port  
Ethernet (RJ-45) port  
Modem (RJ-11) port  
External display (VGA) port  
S-video/TV-out port  
Microphone/line-in jack  
Headphones/speaker/line-out port  
Infrared (FIR) port  
Type II PC Card slot  
6-in-1 card reader  
DC-in jack for AC adaptor  
124-pin Acer ezDock connector (for selected models)  
Kensington lock slot  
Security  
BIOS user and supervisor passwords  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Software  
Acer Launch Manager  
Acer eManager (ePresentation/eRecovery/eSettings)  
Acer GridVista  
Acer System Recovery CD  
Norton AntiVirus™  
Adobe® Reader®  
CyberLink® PowerDVD™  
NTI CD-Maker™  
Options and  
accessories  
256/512 MB and 1 GB soDIMM memory  
Li-ion battery pack  
90 W AC adaptor  
Acer ezDock (for selected models)  
Temperature:  
Environment  
Operating: 5° C to 35° C  
Non-operating: -20° C to 65° C  
Humidity (non-condensing):  
Operating: 20% to 80%  
Non-operating: 20% to 80%  
System  
compliance  
Mobile PC 2001  
ACPI 1.0b  
DMI 2.0  
Wi-Fi®  
Warranty  
One-year International Travelers Warranty (ITW)  
Note: The specifications listed above are for reference only. The  
exact configuration of your PC depends on the model purchased.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Indicators  
The computer has four easy-to-read status indicators on the upper-right above  
the keyboard, and four on the front panel.  
The power, battery, and wireless communication status indicators are visible  
even when the LCD display is closed.  
Icon  
Function  
Description  
Caps Lock  
Lights up when Caps Lock is activated.  
Num Lock  
Lights up when Num Lock is activated.  
Media activity Indicates when the hard disk or optical drive is active.  
Bluetooth  
Wireless LAN  
Power  
Indicates the status of Bluetooth communication.  
Indicates the status of wireless LAN communication.  
Lights up when the computer is on.  
Battery  
Lights up when the battery is being charged.  
1. Charging: The light shows amber when the battery is charging.  
2. Fully charged: The light shows green when in AC mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
10  
Launch keys  
Located at the upper-right, above the keyboard are four buttons. These buttons  
are called launch keys. They are: mail, Web browser, Acer Empowering Key  
"
" and one user-programmable button.  
Press " " to run the Acer eManager. Please see "Acer eManager" on page 19.  
The mail and Web buttons are pre-set to email and Internet programs, but can  
be reset by users. To set the Web browser, mail and programmable keys, run the  
Acer Launch Manager. See "Launch Manager" on page 21.  
Launch key  
Mail  
Default application  
Email application (user-programmable)  
Internet browser (user-programmable)  
Acer eManager (user-programmable)  
Web browser  
User-programmable  
P
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
11  
Touchpad  
The built-in touchpad is a pointing device that senses movement on its surface.  
This means the cursor responds as you move your finger across the surface of  
the touchpad. The central location on the palmrest provides optimum comfort  
and support.  
Touchpad basics  
The following items show you how to use the touchpad:  
Move your finger across the touchpad (2) to move the cursor.  
Press the left (1) and right (4) buttons located beneath the touchpad to  
perform selection and execution functions. These two buttons are similar  
to the left and right buttons on a mouse. Tapping on the touchpad is the  
same as clicking the left button.  
Use the 4-way scroll (3) button to scroll up or down and move left or right  
a page. This button mimics your cursor pressing on the right scroll bar of  
Windows applications.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
12  
Right  
button (4)  
Center  
button (3)  
Function Left button (1)  
Main touchpad (2)  
Execute  
Quickly click  
twice.  
Tap twice (at the same  
speed as double-clicking  
a mouse button).  
Select  
Drag  
Click once.  
Tap once.  
Click and hold,  
then use  
finger on the  
touchpad to  
drag the  
Tap twice (at the same  
speed as double-clicking  
a mouse button); rest  
your finger on the  
touchpad on the second  
tap and drag the cursor.  
cursor.  
Access  
context  
menu  
Click once.  
Scroll  
Click and  
hold to move  
up/down/  
left/right.  
Note: Keep your fingers dry and clean when using the touchpad.  
Also keep the touchpad dry and clean. The touchpad is sensitive to  
finger movement; hence, the lighter the touch, the better the  
response. Tapping harder will not increase the touchpad's  
responsiveness.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
13  
Using the keyboard  
The keyboard has full-sized keys and an embedded keypad, separate cursor  
keys, two Windows keys and 12 function keys.  
Lock keys and embedded numeric keypad  
The keyboard has three lock keys which you can toggle on and off.  
Lock key  
Description  
Caps Lock  
When Caps Lock is on, all alphabetic characters typed are  
in uppercase.  
Num Lock  
<Fn> + <F11>  
When Num Lock is on, the embedded keypad is in numeric  
mode. The keys function as a calculator (complete with the  
arithmetic operators +, -, *, and /). Use this mode when you  
need to do a lot of numeric data entry. A better solution  
would be to connect an external keypad.  
Scroll Lock  
<Fn> + <F12>  
When Scroll Lock is on, the screen moves one line up or down  
when you press the up or down arrow keys respectively. Scroll  
Lock does not work with some applications.  
The embedded numeric keypad functions like a desktop numeric keypad. It is  
indicated by small characters located on the upper right corner of the keycaps.  
To simplify the keyboard legend, cursor-control key symbols are not printed on  
the keys.  
Desired access  
Num Lock on  
Num Lock off  
Number keys on  
embedded keypad  
Type numbers in a normal  
manner.  
Cursor-control keys on Hold <Shift> while using  
Hold <Fn> while using  
cursor-control keys.  
embedded keypad  
cursor-control keys.  
Main keyboard keys  
Hold <Fn> while typing  
Type the letters in a  
letters on embedded keypad. normal manner.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
14  
Windows keys  
The keyboard has two keys that perform Windows-specific functions.  
Key  
Description  
Windows  
key  
Pressed alone, this key has the same effect as clicking on  
the Windows Start button; it launches the Start menu. It  
can also be used with other keys to provide a variety of  
functions:  
<
<
<
<
<
<
> + <Tab> Activates the next Taskbar button.  
> + <E> Opens the My Computer window.  
> + <F1> Opens Help and Support.  
> + <F>  
> + <R>  
> + <M>  
Opens the Find: All Files dialog box.  
Opens the Run dialog box.  
Minimizes all windows.  
<Shift> + <  
Undoes the minimize all windows action.  
Application This key has the same effect as clicking the right mouse  
key button; it opens the application's context menu.  
> + <M>  
Hotkeys  
The computer employs hotkeys or key combinations to access most of the  
computer's controls like screen brightness, volume output and the BIOS utility.  
To activate hotkeys, press and hold the <Fn> key before pressing the other key  
in the hotkey combination.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
15  
Hotkey  
Icon  
Function  
Description  
<Fn> + <F1>  
Hotkey help Displays help on hotkeys.  
<Fn> + <F2>  
<Fn> + <F3>  
Acer  
eSettings  
Launches Acer eSettings in Acer  
eManager. See "Acer eManager" on  
Power  
Launches the Power Scheme window.  
management  
<Fn> + <F4>  
<Fn> + <F5>  
Sleep  
Puts the computer in Sleep mode.  
Display  
toggle  
Switches display output between the  
display screen, external monitor  
(if connected) and both.  
<Fn> + <F6>  
Screen blank Turns the display screen backlight off to  
save power. Press any key to return.  
<Fn> + <F7>  
<Fn> + <F8>  
<Fn> + <>  
Touchpad  
toggle  
Turns the internal touchpad on and off.  
Turns the speakers on and off.  
Increases the sound volume.  
Speaker  
toggle  
Volume up  
<Fn> + <>  
<Fn> + <>  
Volume down Decreases the sound volume.  
Brightness up Increases the screen brightness.  
<Fn> + <  
>
Brightness  
down  
Decreases the screen brightness.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
16  
Special keys  
You can locate the Euro symbol and the US dollar sign at the upper-center  
and/or bottom-right of your keyboard. To type:  
The Euro symbol  
1
2
Open a text editor or word processor.  
Either directly press the <Euro> key at the bottom-right of the keyboard,  
or hold <Alt Gr> and then press the <5> key at the upper-center of the  
keyboard.  
Note: Some fonts and software do not support the Euro symbol.  
more information.  
The US dollar sign  
1
2
Open a text editor or word processor.  
Either directly press the <Dollar> key at the bottom-right of the keyboard,  
or hold <Shift> and then press the <4> key at the upper-center of the  
keyboard.  
Note: This function varies according to the language settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
17  
Ejecting the optical (CD or DVD)  
drive tray  
To eject the optical drive tray when the computer is turned on, press the drive  
eject button.  
When the power is off, you can eject the drive tray by using the emergency  
eject hole.  
Using a computer security lock  
A security keylock notch, located on the rear of the computer, lets you connect  
a Kensington-compatible computer security lock.  
Wrap the computer security lock cable around an immovable object such as a  
table or handle of a locked drawer. Insert the lock into the notch and turn the  
key to secure the lock. Some keyless models are also available.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
18  
Audio  
The computer comes with 16-bit high-fidelity AC'97 stereo audio, and dual  
stereo speakers.  
Adjusting the volume  
Adjusting the volume on the computer is as easy as pressing some buttons. See  
"Hotkeys" on page 14 for more information on adjusting the speaker volume.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
19  
Using the system utilities  
Acer eManager  
The innovative Acer eManager software is designed for easy access to  
frequently used functions. Press "  
" to launch the Acer eManager user  
interface, which features three main settings: Acer ePresentation, Acer  
eRecovery and Acer eSettings.  
To set the "  
Acer ePresentation  
Simplifies resolution settings when connecting to a projector.  
Acer eRecovery  
Creates backups and recovers system configurations reliably.  
Acer eSettings  
Makes managing system settings and security easy.  
For more information, open Acer eManager, click on the appropriate  
application and select the Help function.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
20  
Acer GridVista (dual-display compatible)  
Note: This feature is only available on certain models.  
To enable the dual monitor feature of your notebook, first ensure that the  
second monitor is connected, then, select Start, Control Panel, Display and click  
on Settings. Select the secondary monitor (2) icon in the display box and then  
click the check box Extend my windows desktop onto this monitor. Finally, click  
Apply to confirm the new settings and click OK to complete the process.  
Acer GridVista is a handy utility that offers four pre-defined display settings so  
you can view multiple windows on the same screen. To access this function,  
please go to Start, All Programs and click on Acer GridVista. You may choose  
any one of the four display settings indicated below:  
Double (vertical), Triple (primary at left), Triple (primary at right), or Quad  
Acer Gridvista is dual-display compatible, allowing two displays to be  
partitioned independently.  
Acer GridVista is simple to set up:  
1
Run Acer GridVista and select your preferred screen configuration for each  
display from the taskbar.  
2
Drag and drop each window into the appropriate grid.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
21  
3
Enjoy the convenience of a well-organized desktop.  
Note: Please ensure that the resolution setting of your second  
monitor is set to the manufacturer's recommended value.  
Launch Manager  
Launch Manager allows you to set the four launch keys located above the  
keyboard. "Launch keys" on page 10 for the location of the launch keys.  
You can access the Launch Manager by clicking on Start, All Programs, and then  
Launch Manager to start the application.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
22  
Frequently asked questions  
The following is a list of possible situations that may arise during the use of  
your computer. Easy solutions are provided for each one.  
I pressed the power button and opened the display, but the  
computer does not start or boot-up.  
Look at the power indicator:  
If it is not lit, no power is being supplied to the computer. Check the  
following:  
If you are using on the battery, it may be low and unable to power  
the computer. Connect the AC adaptor to recharge the battery pack.  
Make sure that the AC adaptor is properly plugged into the computer  
and to the power outlet.  
If it is lit, check the following:  
Is a non-bootable (non-system) disk in the external USB floppy drive?  
Remove or replace it with a system disk and press <Ctrl> + <Alt> +  
<Del> to restart the system.  
Nothing appears on the screen.  
The computer's power management system automatically blanks the screen to  
save power. Press any key to turn the display back on.  
If pressing a key does not turn the display back on, three things might be  
the cause:  
The brightness level might be too low. Press <Fn> + <> (increase) to  
adjust the brightness level.  
The display device might be set to an external monitor. Press the display  
toggle hotkey <Fn> + <F5> to toggle the display back to the computer.  
If the Sleep indicator is lit, the computer is in Sleep mode. Press and release  
the power button to resume.  
Image is not full-screen.  
Each computer display has a different native resolution depending on the  
screen. If you set the resolution lower than this native resoution, the screen  
expands to fill the computer display. Right-click on your Windows desktop and  
select Properties to bring up the "Display Properties" dialog box. Then click on  
the Settings tab to make sure that the resolution is set to the appropriate  
resolution. Resolutions lower than the specified resolution are not full-screen  
on the computer or on an external monitor.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
23  
No audio is heard from the computer.  
Check the following:  
The volume may be muted. In Windows, look at the volume control  
(speaker) icon on the taskbar. If it is crossed-out, click on the icon and  
deselect the Mute option.  
The volume level may be too low. In Windows, look at the volume control  
icon on the taskbar. You can also use the volume control buttons to adjust  
the volume. See "Hotkeys" on page 14 for more detail.  
If headphones, earphones or external speakers are connected to the line-  
out port on the computer, the internal speakers automatically turn off.  
I want to eject the optical drive tray without turning on the  
power. I cannot eject the optical drive tray.  
There is a mechanical eject hole on the optical drive. Simply insert the tip of a  
pen or paperclip and push to eject the tray.  
The keyboard does not respond.  
Try attaching an external keyboard to a USB 2.0 port on the computer. If it  
works, contact your dealer or an authorized service center as the internal  
keyboard cable may be loose.  
The infrared port does not work.  
Check the following:  
Make sure that the infrared ports of the two devices are facing each other  
(+/- 15 degrees) a maximum of 1 meter apart.  
Make sure there is a clear path between the two infrared ports. Nothing  
should be blocking the ports.  
Make sure you have the appropriate software running on both devices (for  
file transfers) or you have the appropriate drivers (for printing to an  
infrared printer).  
During the POST, press <F2> to access the BIOS utility and verify that the  
infrared port is enabled.  
Make sure both devices are IrDA-compliant.  
The printer does not work.  
Check the following:  
Make sure that the printer is connected to a power outlet and that it is  
turned on.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
24  
Make sure that the printer cable is connected securely to the computer's  
parallel port or a USB port and the corresponding port on the printer.  
I want to set up my location to use the internal modem.  
To properly use your communication software (e.g. HyperTerminal), you need  
to set up your location:  
1
2
3
Click on Start, Settings, Control Panel.  
Double-click on Modems.  
Click on Dialing Properties and begin setting up your location.  
Refer to the Windows manual.  
Note: Please note, on first booting your notebook, that you can  
skip the Internet Connection setup, as it is not necessary to  
complete the installation of your Operating System. After the  
Operating System is set up, you can proceed with the Internet  
Connection setup.  
I want to restore my computer to its original settings without  
recovery CDs.  
Note: If your system is the multilingual version, the operating  
system and language you choose when you first turn on the  
system will be the only option for future recovery operations.  
This recovery process helps you restore the C: drive with the original software  
content that is installed when you purchase your notebook. Follow the steps  
below to rebuild your C: drive. (Your C: drive will be reformatted and all data  
will be erased.) It is important to back up all data files before using this option.  
Before performing a restore operation, please check the BIOS settings.  
1
2
3
Check to see if Acer disk-to-disk recovery is enabled or not.  
Make sure the D2D Recovery setting in Main is Enabled.  
Exit the BIOS setup utility and save changes. The system will reboot.  
Note: To activate the BIOS setup utility, press <F2> during POST.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
25  
To start the recovery process:  
1
2
Restart the system.  
While the Acer logo is showing, press <Alt> + <F10> at the same time to  
enter the recovery process.  
3
Refer to the on-screen instructions to perform system recovery.  
Important: This feature occupies 2 to 3 GB in a hidden partition on  
your hard drive.  
Requesting service  
International Travelers Warranty (ITW)  
Your computer is backed by an International Travelers Warranty (ITW) that  
gives you security and peace of mind when traveling. Our worldwide network  
of service centers are there to give you a helping hand.  
An ITW passport comes with your computer. This passport contains all you need  
to know about the ITW program. A list of available, authorized service centers is  
in this handy booklet. Read this passport thoroughly.  
Always have your ITW passport on hand, especially when you travel, to receive  
the benefits from our support centers. Place your proof-of-purchase in the flap  
located inside the front cover of the ITW passport.  
If the country you are traveling in does not have an Acer-authorized ITW service  
site, you can still get in contact with our offices worldwide. Please consult  
Before you call  
Please have the following information available when you call Acer for  
online service, and please be at your computer when you call. With your  
support, we can reduce the amount of time a call takes and help solve your  
problems efficiently.  
If there are error messages or beeps reported by your computer, write them  
down as they appear on the screen (or the number and sequence in the case  
of beeps).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
26  
You are required to provide the following information:  
Name: _____________________________________________  
Address: ___________________________________________  
Telephone number: _________________________________  
Machine and model type: ____________________________  
Serial number: ______________________________________  
Date of purchase: ___________________________________  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
Taking your notebook PC with you  
This section gives you tips and hints to consider when moving around or  
traveling with your computer.  
Disconnecting from the desktop  
Follow these steps to disconnect your computer from external accessories:  
1
2
3
4
5
6
Save any open files.  
Remove any media, floppy disks or compact disks from the drive(s).  
Shut down the computer.  
Close the display cover.  
Disconnect the cord from the AC adaptor.  
Disconnect the keyboard, pointing device, printer, external monitor and  
other external devices.  
7
Disconnect the Kensington lock if you are using one to secure the  
computer.  
Moving around  
When you are just moving within short distances, for example, from your office  
desk to a meeting room.  
Preparing the computer  
Before moving the computer, close and latch the display cover to place it in  
Sleep mode. You can now safely take the computer anywhere you go within  
the building. To bring the computer out of Sleep mode, open the display; then  
press and release the power button.  
If you are taking the computer to a client's office or a different building, you  
may choose to shut down the computer:  
Click on Start, Turn Off Computer, then click on Turn Off (Windows XP).  
Or:  
You can put the computer in Sleep mode by pressing <Fn> + <F4>. Then close  
and latch the display.  
When you are ready to use the computer again, unlatch and open the display;  
then press and release the power button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
28  
Note: If the Sleep indicator is off, the computer has entered  
Hibernation mode and is turned off. If the power indicator is off  
but the Sleep indicator is on, the computer has entered Sleep  
mode. In both cases, press and release the power button to turn  
the computer back on. Note that the computer may enter  
Hibernation mode after being in Sleep mode for a period of time.  
What to take to short meetings  
A fully charged battery runs the computer for about 2.5 hours. If your meeting  
is shorter than that, you probably do not need to take anything with you other  
than the computer.  
What to take to long meetings  
If your meeting lasts longer than 2.5 hours, or if your battery is not fully  
charged, you may want to take the AC adaptor with you to plug in your  
computer while in the meeting room.  
If the meeting room does not have an electrical outlet, reduce the drain on the  
battery by putting the computer in Sleep mode. Press <Fn> + <F4> or close the  
display cover whenever you are not actively using the computer. To resume,  
open the display (if closed); then press and release the power button.  
Taking the computer home  
When you are moving from your office to your home or vice versa.  
Preparing the computer  
After disconnecting the computer from your desktop, follow these steps to  
prepare the computer for the trip home:  
Check that you have removed all media and compact disks from the  
drive(s). Failure to remove the media can damage the drive head.  
Pack the computer in a protective case that can prevent the computer from  
sliding around and cushion it if it should fall.  
Caution: Avoid packing items next to the top cover of the  
computer. Pressure against the top cover can damage the screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
29  
What to take with you  
Unless you have some items at home, take the following items with you:  
AC adaptor and power cord  
The printed User's Guide  
Special considerations  
Follow these guidelines to protect your computer while traveling to and  
from work:  
Minimize the effects of temperature changes by keeping the computer  
with you.  
If you need to stop for an extended period of time and cannot carry the  
computer with you, leave the computer in the trunk of the car to avoid  
exposing the computer to excessive heat.  
Changes in temperature and humidity can cause condensation. Allow the  
computer to return to room temperature, and inspect the screen for  
condensation before turning on the computer. If the temperature change  
is greater than 10 °C (18 °F), allow the computer to come to room  
temperature slowly. If possible, leave the computer for 30 minutes in an  
environment with a temperature between outside and room temperature.  
Setting up a home office  
If you frequently work on your computer at home, you may want to purchase a  
second AC adaptor for use at home. With a second AC adaptor, you can avoid  
carrying the extra weight to and from home.  
If you use your computer at home for significant periods of time, you might also  
want to add an external keyboard, monitor or mouse.  
Traveling with the computer  
When you are moving within a larger distance, for instance, from your office  
building to a client's office building or traveling locally.  
Preparing the computer  
Prepare the computer as if you were taking it home. Make sure that the battery  
in the computer is charged. Airport security may require you to turn on your  
computer when carrying it into the gate area.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
30  
What to take with you  
Take the following items with you:  
AC adaptor  
Spare, fully-charged battery pack(s)  
Additional printer driver files if you plan to use another printer  
Special considerations  
In addition to the guidelines for taking the computer home, follow these  
guidelines to protect your computer while traveling:  
Always take the computer as carry-on luggage.  
If possible, have the computer inspected by hand. Airport security X-ray  
machines are safe, but do not put the computer through a metal detector.  
Avoid exposing floppy disks to hand-held metal detectors.  
Traveling internationally with the computer  
When you are moving from country to country.  
Preparing the computer  
Prepare the computer as you would normally prepare it for traveling.  
What to bring with you  
Bring the following items with you:  
AC adaptor  
Power cords that are appropriate for the country to which you  
are traveling  
Spare, fully-charged battery packs  
Additional printer driver files if you plan to use another printer  
Proof of purchase, in case you need to show it to customs officials  
International Travelers Warranty passport  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
31  
Special considerations  
Follow the same special considerations as when traveling with the computer. In  
addition, these tips are useful when traveling internationally:  
When traveling in another country, check that the local AC voltage and the  
AC adaptor power cord specifications are compatible. If not, purchase a  
power cord that is compatible with the local AC voltage. Do not use  
converter kits sold for appliances to power the computer.  
If you are using the modem, check if the modem and connector is  
compatible with the telecommunications system of the country you are  
traveling in.  
Securing your computer  
Your computer is a valuable investment that you need to take care of. Learn  
how to protect and take care of your computer.  
Security features include hardware and software locks — a security notch  
and passwords.  
Using a computer security lock  
A security keylock notch, located on the rear of the computer, lets you connect  
a Kensington-compatible computer security lock.  
Wrap a computer security lock cable around an immovable object such as a  
table or handle of a locked drawer. Insert the lock into the notch and turn the  
key to secure the lock. Some keyless models are also available.  
Using passwords  
Passwords protect your computer from unauthorized access. Setting these  
passwords creates several different levels of protection for your computer  
and data:  
Supervisor Password prevents unauthorized entry into the BIOS utility.  
Once set, you must enter this password to gain access to the BIOS utility.  
User Password secures your computer against unauthorized use. Combine  
the use of this password with password checkpoints on boot-up and  
resume from Hibernation for maximum security.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
32  
Password on Boot secures your computer against unauthorized use.  
Combine the use of this password with password checkpoints on boot-up  
and resume from Hibernation for maximum security.  
Important! Do not forget your Supervisor Password! If you forget  
your password, please get in touch with your dealer or an  
authorized service center.  
Entering passwords  
When a password is set, a password prompt appears in the center of the  
display screen.  
When the Supervisor Password is set, a prompt appears when you press  
<F2> to enter the BIOS utility at boot-up.  
Type the Supervisor Password and press <Enter> to access the BIOS utility.  
If you enter the password incorrectly, a warning message appears. Try  
again and press <Enter>.  
When the User Password is set and the password on boot parameter is  
enabled, a prompt appears at boot-up.  
Type the User Password and press <Enter> to use the computer. If you  
enter the password incorrectly, a warning message appears. Try again and  
press <Enter>.  
Important! You have three chances to enter a password. If you fail  
to enter the password correctly after three tries, the system halts.  
Press and hold the power button for four seconds to shut down  
the computer. Then turn on the computer again, and try again.  
Setting passwords  
You can set passwords using the BIOS utility.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
33  
Expanding through options  
Your notebook PC offers you a complete mobile computing experience.  
Connectivity options  
Ports allow you to connect peripheral devices to your computer as you would  
with a desktop PC. For instructions on how to connect different external devices  
to the computer, read the following section.  
Fax/data modem  
Your computer has a built-in V.92 56 Kbps fax/data modem.  
Warning! This modem port is not compatible with digital phone  
lines. Plugging this modem into a digital phone line will damage  
the modem.  
To use the fax/data modem port, connect a phone cable from the modem port  
to a telephone jack.  
Warning: Please make sure that the cable you use is appropriate  
for the country in which you are working.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
34  
Built-in network feature  
The built-in network feature allows you to connect your computer to an  
Ethernet-based network.  
To use the network feature, connect an Ethernet cable from the network jack  
on the left hand side of the computer to a network jack or hub on your  
network.  
Fast Infrared  
The computer's Fast Infrared (FIR) port allows you to do wireless data transfer  
with other IR-aware computers and peripherals such as PDAs, mobile phones,  
and infrared printers. The infrared port can transfer data at speeds of up to 4  
Mbps at a distance of up to one meter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
35  
Universal Serial Bus (USB)  
The USB 2.0 port is a high-speed serial bus which allows you to connect USB  
peripherals without taking up precious system resources.  
IEEE 1394 port  
The computer's IEEE 1394 port allows you to connect to an IEEE 1394-  
compatible device like a video camera or digital camera.  
See your video or digital camera's documentation for details.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
36  
PC Card slot  
The Type II PC Card slot of the computer accepts PC Cards that enhance the  
usability and expandability of the computer. These cards should have a PC Card  
logo on them.  
PC Cards (formerly PCMCIA) are add-on cards for portable computers, giving  
you expansion possibilities long afforded by desktop PCs. Popular PC Cards  
include flash, fax/data modem, wireless LAN and SCSI cards. CardBus improves  
on the 16-bit PC card technology by expanding the bandwidth to 32 bits.  
Note: Refer to your card's manual for details on how to install and  
use the card, and its functions.  
Inserting a PC Card  
Insert the card into the slot and make the proper connections (e.g., network  
cable), if necessary. See your card manual for details.  
Ejecting a PC Card  
Before ejecting a PC Card:  
1
2
3
Exit the application using the card.  
Left-click on the PC Card icon on the taskbar and stop the card operation.  
Press the slot eject button to pop out the eject button; then press it again  
to eject the card.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
37  
Installing memory  
Follow these steps to install memory:  
1
2
3
Turn off the computer, unplug the AC adaptor (if connected) and remove  
the battery pack. Then turn the computer over to access its base.  
Remove the screws from the memory cover; then lift up and remove the  
memory cover.  
(a) Insert the memory module diagonally into the slot, then (b) gently press  
it down until it clicks into place.  
4
5
6
Replace the memory cover and secure it with the screw.  
Reinstall the battery pack, and reconnect the AC adaptor.  
Turn on the computer.  
The computer automatically detects and reconfigures the total memory size.  
Please consult a qualified technician or contact your local Acer dealer.  
BIOS utility  
The BIOS utility is a hardware configuration program built into your  
computer's BIOS.  
Your computer is already properly configured and optimized, and you do not  
need to run this utility. However, if you encounter configuration problems, you  
may need to run it.  
To activate the BIOS utility, press <F2> during the POST; while the notebook PC  
logo is being displayed.  
Boot sequence  
To set the boot sequence in the BIOS utility, activate the BIOS utility, then select  
Boot from the categories listed at the top of the screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
38  
Enable disk-to-disk recovery  
To enable disk-to-disk recovery (hard disk recovery), activate the BIOS utility,  
then select Main from the categories listed at the top of the screen. Find D2D  
Recovery at the bottom of the screen and use the <F5> and <F6> keys to set this  
value to Enabled.  
Password  
To set a password on boot, activate the BIOS utility, then select Security from  
the categories listed at the top of the screen. Find Password on boot: and use  
the <F5> and <F6> keys to enable this feature.  
Using software  
Playing DVD movies  
When the DVD drive module is installed in the optical drive bay, you can play  
DVD movies on your computer.  
1
Eject the DVD tray and insert a DVD movie disk; then close the DVD tray.  
Important! When you launch the DVD player for the first time, the  
program asks you to enter the region code. DVD disks are divided  
into 6 regions. Once your DVD drive is set to a region code, it will  
play DVD disks of that region only. You can set the region code a  
maximum of five times (including the first time), after which the  
last region code set will remain permanent. Recovering your hard  
disk does not reset the number of times the region code has been  
set. Refer to the table below for DVD movie region code  
information.  
2
The DVD movie will automatically play after a few seconds.  
Region code  
Country or region  
1
USA, Canada  
2
3
4
5
6
Europe, Middle East, South Africa, Japan  
Southeast Asia, Taiwan, South Korea  
Latin America, Australia, New Zealand  
Former USSR, parts of Africa, India  
People's Republic of China  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
39  
Note: To change the region code, insert a DVD movie of a  
different region into the DVD drive. Please refer to the online  
help for more information.  
Power management  
This computer has a built-in power management unit that monitors system  
activity. System activity refers to any activity involving one or more of the  
following devices: keyboard, mouse, floppy drive, hard disk, peripherals  
connected to the serial and parallel ports, and video memory. If no activity is  
detected for a period of time (called an inactivity timeout), the computer stops  
some or all of these devices in order to conserve energy.  
This computer employs a power management scheme that supports the  
advanced configuration and power interface (ACPI), which allows for maximum  
power conservation and maximum performance at the same time. Windows  
handles all power-saving chores for your computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
40  
Acer eRecovery  
Acer eRecovery is a tool to quickly backup and restore the system. You can  
create and save a backup of the current system configuration to hard drive, CD  
or DVD.  
Acer eRecovery consists of the following functions:  
1
2
3
4
5
Create backup  
Restore from backup  
Create factory default image CD  
Re-install bundled software without CD  
Change Acer eRecovery password  
This chapter will guide you through each process.  
Note: This feature is only available on certain models. For systems  
that do not have a built-in optical disk burner, plug in an external  
USB or IEEE 1394-compatible optical disk burner before entering  
Acer eRecovery for optical disk-related tasks.  
Create backup  
You can create and save backup images to hard drive, CD or DVD.  
1
2
3
4
5
Boot to Windows XP  
Press <Alt> + <F10> to open the Acer eRecovery utility.  
Enter the password to proceed. The default password is six zeros.  
In the Acer eRecovery window, select Recovery settings and click Next.  
In the Recovery settings window, select Backup snapshot image and  
click Next.  
6
Select the backup method.  
a
b
Use Backup to HDD to store the backup disk image on drive D:.  
Backup to optical device to store the backup image on CD or DVD.  
7
After choosing the backup method, click Next.  
Follow the instructions on screen to complete the process.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
41  
Restore from backup  
You can restore backups previously created (as stated in the Create backup  
section) from hard drive, CD or DVD.  
1
2
3
4
5
Boot to Windows XP.  
Press <Alt> + <F10> to open the Acer eRecovery utility.  
Enter the password to proceed. The default password is six zeros.  
In the Acer eRecovery window, select Recovery actions and click Next.  
Select the desired restore action and follow the onscreen instructions to  
complete the restore process.  
Note: The "Restore C:" item is enabled only if there is a user  
backup stored on the hard drive (D:\). Please refer to the Create  
backup section.  
Create factory default image CD  
When the System CD and Recovery CD are not available, you can create them by  
using this feature.  
1
2
3
4
5
6
Boot to Windows XP.  
Press <Alt> + <F10> to open the Acer eRecovery utility.  
Enter the password to proceed. The default password is six zeros.  
In the Acer eRecovery window, select Recovery settings and click Next.  
In the Recovery settings window, select Burn image to disk and click Next.  
In the Burn image to disk window, select 01. Factory default image and  
click Next.  
7
Follow the instructions on screen to complete the process.  
Re-install bundled software without CD  
Acer eRecovery stores pre-loaded software internally for easy driver and  
application re-installation.  
1
2
3
4
5
Boot to Windows XP.  
Press <Alt> + <F10> to open the Acer eRecovery utility.  
Enter the password to proceed. The default password is six zeros.  
In the Acer eRecovery window, select Recovery actions and click Next.  
In the Recovery settings window, select Reinstall applications/drivers and  
click Next.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
42  
6
Select the desired driver/application and follow the instructions on screen  
to re-install.  
At first launch, Acer eRecovery prepares all the needed software and may take  
few seconds to bring up the software content window.  
Change password  
Acer eRecovery and Acer disk-to-disk recovery are protected by a password that  
can be changed by the user. Follow the steps below to change the password in  
Acer eRecovery.  
1
2
3
4
5
Boot to Windows XP.  
Press <Alt> + <F10> to open the Acer eRecovery utility.  
Enter the password to proceed. The default password is six zeros.  
In the Acer eRecovery window, select Recovery settings and click Next.  
In the Recovery settings window, select Password: Change Acer eRecovery  
password and click Next.  
6
Follow the instructions on screen to complete the process.  
Note: If the system crashes, and will not boot to Windows, you can  
run Acer disk-to-disk recovery to restore the factory default image  
under DOS mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
43  
Troubleshooting  
This chapter shows you how to deal with common system problems.  
Read it before calling a technician if a problem occurs. Solutions to more  
serious problems require opening up the computer. Do not attempt to open  
the computer yourself; contact your dealer or authorized service center  
for assistance.  
Troubleshooting tips  
This notebook computer incorporates an advanced design that delivers  
onscreen error message reports to help you solve problems.  
If the system reports an error message or an error symptom occurs, see "Error  
messages" below. If the problem cannot be resolved, contact your dealer. See  
Error messages  
If you receive an error message, note the message and take the corrective  
action. The following table lists the error messages in alphabetical order  
together with the recommended course of action.  
Error messages  
Corrective action  
CMOS battery bad  
Contact your dealer or an authorized service center.  
CMOS checksum error Contact your dealer or an authorized service center.  
Disk boot failure  
Insert a system (bootable) disk into the floppy drive  
(A:), then press <Enter> to reboot.  
Equipment  
configuration error  
Press <F2> (during POST) to enter the BIOS utility,  
then press Exit in the BIOS utility to reboot.  
Hard disk 0 error  
Contact your dealer or an authorized service center.  
Contact your dealer or an authorized service center.  
Hard disk 0 extended  
type error  
I/O parity error  
Contact your dealer or an authorized service center.  
Contact your dealer or an authorized service center.  
Keyboard error or no  
keyboard connected  
Keyboard interface  
error  
Contact your dealer or an authorized service center.  
Memory size mismatch Press <F2> (during POST) to enter the BIOS utility,  
then press Exit in the BIOS utility to reboot.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
44  
If you still encounter problems after going through the corrective measures,  
please contact your dealer or an authorized service center for assistance. Some  
problems may be solved using the BIOS utility.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
45  
Regulations and safety notices  
ENERGY STAR guidelines compliance  
As an ENERGY STAR partner, Acer Inc. has determined that this product meets  
the ENERGY STAR guidelines for energy efficiency.  
FCC notice  
This device has been tested and found to comply with the limits for a Class B  
digital device pursuant to Part 15 of the FCC rules. These limits are designed to  
provide reasonable protection against harmful interference in a residential  
installation. This device generates, uses, and can radiate radio frequency energy  
and, if not installed and used in accordance with the instructions, may cause  
harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this device does cause harmful interference to radio or television  
reception, which can be determined by turning the device off and on, the user  
is encouraged to try to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the device and receiver.  
Connect the device into an outlet on a circuit different from that to which  
the receiver is connected.  
Consult the dealer or an experienced radio/television technician for help.  
Notice: Shielded cables  
All connections to other computing devices must be made using shielded cables  
to maintain compliance with FCC regulations.  
Notice: Peripheral devices  
Only peripherals (input/output devices, terminals, printers, etc.) certified to  
comply with the Class B limits may be attached to this equipment. Operation  
with non-certified peripherals is likely to result in interference to radio and TV  
reception.  
Caution  
Changes or modifications not expressly approved by the manufacturer could  
void the user's authority, which is granted by the Federal Communications  
Commission, to operate this computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
46  
Operation conditions  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) this device may not cause harmful interference,  
and (2) this device must accept any interference received, including interference  
that may cause undesired operation.  
Notice: Canadian users  
This Class B digital apparatus complies with Canadian ICES-003.  
Remarque à l'intention des utilisateurs canadiens  
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du  
Canada.  
Declaration of Conformity for EU countries  
Hereby, Acer, declares that this notebook PC series is in compliance with the  
essential requirements and other relevant provisions of Directive 1999/5/EC.  
complete documents.)  
Compliant with Russian regulatory certification  
Download from Www.Somanuals.com. All Manuals Search And Download.  
47  
Modem notices  
Notice for USA  
This equipment complies with Part 68 of the FCC rules. Located on the modem is  
a label that contains, among other information, the FCC Registration Number  
and Ringer Equivalence Number (REN) for this equipment. Upon request, you  
must provide this information to your telephone company.  
If your telephone equipment causes harm to the telephone network, the  
telephone company may discontinue your service temporarily. If possible, they  
will notify you in advance. But, if advance notice is not practical, you will be  
notified as soon as possible. You will also be informed of your right to file a  
complaint with the FCC.  
Your telephone company may make changes in its facilities, equipment,  
operations, or procedures that could affect the proper functioning of your  
equipment. If they do, you will be notified in advance to give you an  
opportunity to maintain uninterrupted telephone service.  
If this equipment should fail to operate properly, disconnect the equipment  
from the phone line to determine if it is causing the problem. If the problem is  
with the equipment, discontinue use and contact your dealer or vendor.  
Caution: To reduce the risk of fire, use only No. 26 AWG or larger  
UL Listed or CSA Certified Telecommunication Line Cord.  
TBR 21  
This equipment has been approved [Council Decision 98/482/EC - "TBR 21"] for  
single terminal connection to the Public Switched Telephone Network (PSTN).  
However, due to differences between the individual PSTNs provided in different  
countries, the approval does not, of itself, give an unconditional assurance of  
successful operation on every PSTN termination point. In the event of problems,  
you should contact your equipment supplier in the first instance.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
48  
List of applicable countries  
EU member states as of May 2004 are: Belgium, Denmark, Germany, Greece,  
Spain, France, Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal,  
Finland, Sweden, United Kingdom Estonia, Latvia, Lithuania, Poland, Hungary,  
Czech Republic, Slovak Republic, Slovenia, Cyprus and Malta. Usage allowed in  
the countries of European Union, as well as Norway, Switzerland, Iceland and  
Liechtenstein. This device must be used in strict accordance with the regulations  
and constraints in the country of use. For further information, please contact  
local office in the country of use.  
Notice for Australia  
For safety reasons, only connect headsets with a telecommunications  
compliance label. This includes customer equipment previously labelled  
permitted or certified.  
Notice for New Zealand  
For modem with approval number PTC 211/03/008  
1
The grant of a Telepermit for any item of terminal equipment indicates  
only that Telecom has accepted that the item complies with minimum  
conditions for connection to its network. It indicates no endorsement of  
the product by Telecom, nor does it provide any sort of warranty. Above  
all, it provides no assurance that any item will work correctly in all respects  
with another item of Telepermitted equipment of a different make or  
model, nor does it imply that any product is compatible with all of  
Telecom's network services.  
2
3
This equipment is not capable, under all operating conditions, of correct  
operation at the higher speeds for which it is designed. Telecom will accept  
no responsibility should difficulties arise in such circumstances.  
Some parameters required for compliance with Telecom's Telepermit  
requirements are dependent on the equipment (PC) associated with this  
device. The associated equipment shall be set to operate within the  
following limits for compliance with Telecom's Specifications:  
a
There shall be no more than 10 call attempts to the same number  
within any 30 minute period for any single manual call initiation, and  
b
The equipment shall go on-hook for a period of not less than 30  
seconds between the end of one attempt and the beginning of the  
next call attempt.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
49  
4
5
Some parameters required for compliance with Telecom's Telepermit  
requirements are dependent on the equipment (PC) associated with this  
device. In order to operate within the limits for compliance with Telecom's  
specifications, the associated equipment shall be set to ensure that  
automatic calls to different numbers are spaced such that there is not less  
than 5 seconds between the end of one call attempt and the beginning  
of another.  
This equipment shall not be set up to make automatic calls to Telecom's  
111 Emergency Service.  
For modem with approval number PTC 211/01/030  
1
The grant of a Telepermit for any item of terminal equipment indicates  
only that Telecom has accepted that the item complies with minimum  
conditions for connection to its network. It indicates no endorsement of  
the product by Telecom, nor does it provide any sort of warranty. Above  
all, it provides no assurance that any item will work correctly in all respects  
with another item of Telepermitted equipment of a different make or  
model, nor does it imply that any product is compatible with all of  
Telecom's network services.  
2
3
4
This equipment is not capable, under all operating conditions, of correct  
operation at the higher speeds for which it is designed. Telecom will accept  
no responsibility should difficulties arise in such circumstances.  
This device is equipped with pulse dialing while the Telecom standard is  
DTMF tone dialing. There is no guarantee that Telecom lines will always  
continue to support pulse dialing.  
Use of pulse dialing, when this equipment is connected to the same line as  
other equipment, may give rise to bell tinkle or noise and may also cause a  
false answer condition. Should such problems occur, the user should NOT  
contact the telecom Fault Service.  
5
6
This equipment may not provide for the effective hand-over of a call to  
another device connected to the same line.  
Under power failure conditions this appliance may not operate. Please  
ensure that a separate telephone, not dependent on local power, is  
available for emergency use.  
7
Some parameters required for compliance with Telecom's Telepermit  
requirements are dependent on the equipment (PC) associated with this  
device. The associated equipment shall be set to operate within the  
following limits for compliance with Telecom's specifications, the  
associated equipment shall be set to ensure that calls are answered  
between 3 and 30 seconds of receipt of ringing.  
8
This equipment shall not be set up to make automatic calls to Telecom's  
111 Emergency Service.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
50  
Important safety instructions  
Read these instructions carefully. Save them for future reference.  
1
2
Follow all warnings and instructions marked on the product.  
Unplug this product from the wall outlet before cleaning. Do not  
use liquid cleaners or aerosol cleaners. Use a water-moistened cloth  
for cleaning.  
3
4
Do not use this product near water.  
Do not place this product on an unstable cart, stand or table. If the product  
falls, it could be seriously damaged.  
5
Slots and openings are provided for ventilation; to ensure reliable  
operation of the product and to protect it from overheating. These  
openings must not be blocked or covered. The openings should never be  
blocked by placing the product on a bed, sofa, rug or other similar surface.  
This product should never be placed near or over a radiator or heat  
register, or in a built-in installation unless proper ventilation is provided.  
6
This product should be operated from the type of power indicated on the  
marking label. If you are not sure of the type of power available, consult  
your dealer or local power company.  
7
8
Do not allow anything to rest on the power cord. Do not locate this  
product where people will walk on the cord.  
If an extension cord is used with this product, make sure that the total  
ampere rating of the equipment plugged into the extension cord does not  
exceed the extension cord ampere rating. Also, make sure that the total  
rating of all products plugged into the wall outlet does not exceed the  
fuse rating.  
9
Never push objects of any kind into this product through cabinet slots as  
they may touch dangerous voltage points or short-out parts that could  
result in a fire or electric shock. Never spill liquid of any kind onto or into  
the product.  
10 Do not attempt to service this product yourself, as opening or removing  
covers may expose you to dangerous voltage points or other risks. Refer all  
servicing to qualified service personnel.  
11 Unplug this product from the wall outlet and refer servicing to qualified  
service personnel under the following conditions:  
a
b
c
When the power cord or plug is damaged or frayed.  
If liquid has been spilled into the product.  
If the product has been exposed to rain or water.  
d
If the product does not operate normally when the operating  
instructions are followed. Adjust only those controls that are covered  
by the operating instructions, since improper adjustment of other  
controls may result in damage and will often require extensive work  
by a qualified technician to restore the product to normal condition.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
51  
e
f
If the product has been dropped or the case has been damaged.  
If the product exhibits a distinct change in performance, indicating a  
need for service.  
12 The notebook PC series uses lithium batteries.  
Replace the battery with the same type as the product's battery we  
recommend in the product specification list. Use of another battery may  
present a risk of fire or explosion.  
13 Warning! Batteries may explode if not handled properly. Do not  
disassemble or dispose of them in fire. Keep them away from children and  
dispose of used batteries promptly.  
14 To avoid hazard of unexpected electrical shock, use the AC adaptor only  
when the wall socket is properly grounded.  
15 Use only the proper type of power supply cord set (provided in your  
accessories box) for this unit. It should be a detachable type: UL listed/CSA  
certified, type SPT-2, rated 7 A 125 V minimum, VDE approved or its  
equivalent. Maximum length is 4.6 meters (15 feet).  
16 Always disconnect all telephone lines from the wall outlet before serving  
or disassembling this equipment.  
17 Avoid using a telephone (other than a cordless type) during an electrical  
storm. There may be a remote risk of electric shock from lightning.  
Laser compliance statement  
The CD or DVD drive used with this computer is a laser product.  
The CD or DVD drive's classification label (shown below) is located on the drive.  
CLASS 1 LASER PRODUCT  
CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE  
TO BEAM.  
APPAREIL A LASER DE CLASSE 1 PRODUIT  
LASERATTENTION: RADIATION DU FAISCEAU LASER INVISIBLE EN CAS  
D’OUVERTURE. EVITTER TOUTE EXPOSITION AUX RAYONS.  
LUOKAN 1 LASERLAITE LASER KLASSE 1  
VORSICHT: UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET  
NICHT DEM STRAHLL AUSSETZEN  
PRODUCTO LÁSER DE LA CLASE I  
ADVERTENCIA: RADIACIÓN LÁSER INVISIBLE AL SER ABIERTO. EVITE EXPONERSE  
A LOS RAYOS.  
ADVARSEL: LASERSTRÅLING VEDÅBNING SE IKKE IND I STRÅLEN.  
VARO! LAVATTAESSA OLET ALTTINA LASERSÅTEILYLLE.  
VARNING: LASERSTRÅLNING NÅR DENNA DEL ÅR ÖPPNAD ÅLÅ TUIJOTA  
SÅTEESEENSTIRRA EJ IN I STRÅLEN  
VARNING: LASERSTRÅLNING NAR DENNA DEL ÅR ÖPPNADSTIRRA EJ IN I  
STRÅLEN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
52  
ADVARSEL: LASERSTRÅLING NAR DEKSEL ÅPNESSTIRR IKKE INN I STRÅLEN  
LCD pixel statement  
The LCD unit is produced with high-precision manufacturing techniques.  
Nevertheless, some pixels may occasionally misfire or appear as black or  
red dots. This has no effect on the recorded image and does not constitute  
a malfunction.  
Macrovision copyright protection notice  
This product incorporates copyright protection technology that is protected by  
U.S. patents and other intellectual property rights. Use of this copyright  
protection technology must be authorized by Macrovision, and is intended for  
home and other limited viewing uses only unless otherwise authorized by  
Macrovision. Reverse engineering or disassembly is prohibited.  
U.S. Patent Nos. 4,631,603; 4,819,098; 4,907,093; 5,315,448; and 6,516,132.  
Radio device regulatory notice  
Note: Below regulatory information is for models with wireless  
LAN and/or Bluetooth only.  
General  
This product complies with the radio frequency and safety standards of any  
country or region in which it has been approved for wireless use. Depending on  
configurations, this product may or may not contain wireless radio devices (such  
as wireless LAN and/or Bluetooth modules). Below information is for products  
with such devices.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
53  
European Union (EU)  
This device complies with the essential requirements of the European Council  
Directives listed below:  
73/23/EEC Low Voltage Directive  
EN 60950  
89/336/EEC Electromagnetic Compatibility (EMC) Directive  
EN 55022  
EN 55024  
EN 61000-3-2/-3  
99/5/EC Radio & Telecommunications Terminal Equipment (R&TTE) Directive  
Art.3.1a) EN 60950  
Art.3.1b) EN 301 489 -1/-17  
Art.3.2) EN 300 328-2  
Art.3.2) EN 301 893 *applies to 5 GHz only  
List of applicable countries  
EU member states as of May 2004 are: Belgium, Denmark, Germany, Greece,  
Spain, France, Ireland, Italy, Luxembourg, the Netherlands, Austria, Portugal,  
Finland, Sweden, United Kingdom Estonia, Latvia, Lithuania, Poland, Hungary,  
Czech Republic, Slovak Republic, Slovenia, Cyprus and Malta. Usage allowed in  
the countries of European Union, as well as Norway, Switzerland, Iceland and  
Liechtenstein. This device must be used in strict accordance with the regulations  
and constraints in the country of use. For further information, please contact  
local office in the country of use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
54  
The FCC RF safety requirement  
The radiated output power of the wireless LAN Mini PCI Card and Bluetooth  
card is far below the FCC radio frequency exposure limits. Nevertheless, the  
notebook PC series shall be used in such a manner that the potential for human  
contact during normal operation is minimized as follows:  
1
Users are requested to follow the RF safety instructions on wireless option  
devices that are included in the user's manual of each RF option device.  
Caution: To comply with FCC RF exposure compliance  
requirements, a separation distance of at least 20 cm (8 inches)  
must be maintained between the antenna for the integrated  
wireless LAN Mini PCI Card built in to the screen section and all  
persons.  
Note: The Acer wireless Mini PCI adaptor implements a  
transmission diversity function. The function does not emit radio  
frequencies simultaneously from both antennas. One of the  
antennas is selected automatically or manually (by users) to ensure  
good quality radiocommunication.  
2
3
This device is restricted to indoor use due to its operation in the 5.15 to  
5.25 GHz frequency range. FCC requires this product to be used indoors for  
the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful  
interference to co-channel Mobile Satellite systems.  
High power radar are allocated as primary users of the 5.25 to 5.35 GHz  
and 5.65 to 5.85 GHz bands. These radar stations can cause interference  
with and/or damage this device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
55  
4
An improper installation or unauthorized use may cause harmful  
interference to radio communications. Also any tampering of the internal  
antenna will void the FCC certification and your warranty.  
Canada - Low power license-exempt radio  
communication devices (RSS-210)  
a
Common information  
Operation is subject to the following two conditions:  
1. This device may not cause interference, and  
2. This device must accept any interference, including interference  
that may cause undesired operation of the device.  
b
c
Operation in 2.4 GHz band  
To prevent radio interference to the licensed service, this device is  
intended to be operated indoors and installation outdoors is subject  
to licensing.  
Operation in 5 GHz band  
The device for the band 5150-5250 MHz is only for indoor usage to reduce  
potential for harmful interference to co-channel Mobile Satellite systems.  
High power radars are allocated as primary users (meaning they have  
priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could  
cause interference and/or damage to LELAN (Licence-Exempt Local Area  
Network) devices.  
Exposure of humans to RF fields (RSS-102)  
The notebook PC series employs low gain integral antennas that do not emit RF  
field in excess of Health Canada limits for the general population; consult Safety  
Code 6, obtainable from Health Canada's website at www.hc-sc.gc.ca/rpb.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
56  
Federal Communications Comission  
Declaration of Conformity  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) This device may not cause harmful interference,  
and (2) This device must accept any interference received, including  
interference that may cause undesired operation.  
The following local manufacturer/importer is responsible for this declaration:  
Product name:  
Notebook personal computer  
MS2171  
Model number:  
Machine type:  
TravelMate 440xxx  
SKU number:  
TravelMate 440xxx ("x" = 0 - 9, a - z, or A - Z)  
Acer America Corporation  
Name of responsible party:  
Address of responsible party:  
2641 Orchard Parkway  
San Jose, CA 95134  
USA  
Contact person:  
Mr. Young Kim  
408-922-2909  
408-922-2606  
Tel:  
Fax:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
57  
Declaration of Conformity for CE Marking  
Name of manufacturer: Beijing Acer Information Co., Ltd.  
Address of  
Huade Building, No.18, ChuangYe Rd.  
manufacturer:  
ShangDi Zone, HaiDian District Beijing PRCE marking  
Contact person:  
Tel:  
Mr. Easy Lai  
886-2-8691-3089  
886-2-8691-3000  
Notebook PC  
Fax:  
E-mail:  
Declares that product:  
Trade name:  
Model number:  
Machine type:  
SKU number:  
Acer  
MS2171  
TravelMate 440xxx  
TravelMate 440xxx ("x" = 0 - 9, a - z, or A - Z)  
Is in compliance with the essential requirements and other relevant provisions  
of the following EC directives.  
Reference no.  
89/336/EEC  
73/23/EEC  
Title  
Electromagnetic Compatibility (EMC directive)  
Low Voltage Directive (LVD)  
1999/5/EC  
Radio & Telecommunications Terminal Equipment  
Directive (R&TTE)  
The product specified above was tested conforming to the applicable Rules  
under the most accurate measurement standards possible, and all the necessary  
steps have been taken and are in force to assure that production units of the  
same product will continue to comply with these requirements.  
02/16/2005  
Easy Lai, Director  
Qualification Center  
Product Assurance  
Date  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3Com Switch CM 4000 User Manual
Acer Projector DNX0708 User Manual
AEG Washer Dryer 1263 User Manual
Agilent Technologies Network Hardware 06 296 90001 User Manual
Aiphone Intercom System IC D1 User Manual
Alliance Laundry Systems Washer F232148 User Manual
ATO Speaker System SCM110ASL PRO User Manual
Axis Communications Security Camera AXIS M1144 L User Manual
Barco Frozen Dessert Maker K5960008 03 User Manual
Barco Headphones R59970810 00 User Manual