Acer LCD TV
AL2671W
User’s Guide
01-lcd-tv_en_uk.indd
1
2005/5/4 ¤W¤È 08:58:44
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright © 2005. Acer Incorporated.
All Rights Reserved.
Acer LCD TV AL2671W User’s Guide
Original Issue: May 2005
Acer and the Acer logo are registered trademarks of Acer Incorporated. SRS WOW technology is incorporated under license from SRS Labs,
Inc. Other company’s product names or trademarks are used herein for identification purposes only and belong to their respective companies.
Download from Www.Somanuals.com. All Manuals Search And Download.
01-lcd-tv_en_uk.indd
2
2005/5/4 ¤W¤È 11:37:13
01-lcd-tv_en_uk.indd
4
2005/5/4 ¤W¤È 08:58:46
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety instructions
Read these instructions carefully. Save them for
future reference.
8
If an extension cord is used with this product,
make sure that the total ampere rating of the
equipment plugged into the extension cord
does not exceed the extension cord ampere
rating. Also, make sure that the total rating of
all products plugged into the wall outlet does
not exceed the fuse rating.
1
2
Follow all warnings and instructions marked on
the product.
Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
9
Never push objects of any kind into this
3
4
Do not use this product near water.
product through cabinet slots as they may
touch dangerous voltage points or short out
parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
10 Do not attempt to service this product yourself,
as opening or removing covers may expose you
to dangerous voltage points or other risks. Refer
all servicing to qualified service personnel.
INPUT
-
VOLUME
+
-
CHANNEL
+
MENU
POWER
Do not place this product on an unstable cart,
stand, or table. The product may fall, causing
serious damage to the product.
11 Unplug this product from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
a. When the power cord or plug is damaged or
frayed.
b. If liquid has been spilled into the product.
c. If the product has been exposed to rain or
water.
5
Slots and openings are provided for ventilation;
to ensure reliable operation of the product and
to protect it from overheating. These openings
must not be blocked or covered. The openings
should never be blocked by placing the product
on a bed, sofa, rug, or other similar surface.
This product should never be placed near or
over a radiator or heat register, or in a built-
in installation unless proper ventilation is
provided.
d. If the product does not operate normally
when the operating instructions are fol-
lowed. Adjust only those controls that are
covered by the operating instructions since
improper adjustment of other controls may
result in damage and will often require
extensive work by a qualified technician to
restore the product to normal condition.
e. If the product has been dropped or the case
has been damaged.
f. If the product exhibits a distinct change in
performance, indicating a need for service.
12 Use only the proper type of power supply
cord set (provided in your accessories box)
for this unit. Always disconnect the power
cord from the wall outlet before servicing or
disassembling this equipment.
INPUT
-
VOLUME
+
-
CHANNEL
+
MENU
POWER
6
7
This product should be operated from the type
of power indicated on the marking label. If you
are not sure of the type of power available,
consult your dealer or local power company.
Do not allow anything to rest on the power
cord. Do not locate this product where persons
will step on the cord.
INPUT
-
VOLUME
+
-
CHANNEL
+
MENU
POWER
5
01-lcd-tv_en_uk.indd
5
2005/5/4 ¤W¤È 08:58:48
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking care of your remote control
Here are some ways to handle your remote control:
•
Dropping, wetting or placing the remote control in the sunlight may cause damage. Handle the
remote control with care.
•
•
Do not tamper with batteries. Keep them away from children.
When you anticipate that the remote control will not be used for an extended period, remove the
batteries to prevent possible damage to the remote control in a result of battery leakage.
•
Dispose of used batteries according to local regulations.
Recycle if at all possible.
Cleaning and servicing
When cleaning your LCD TV, follow these steps:
1
2
3
Power off the TV.
Disconnect the power cord.
Use a soft cloth moistened with water. Do not use liquid or aerosol cleaners.
6
01-lcd-tv_en_uk.indd
6
2005/5/4 ¤W¤È 08:58:52
Download from Www.Somanuals.com. All Manuals Search And Download.
First things first
We would like to thank you for making the Acer AL2671W your choice. Your new Acer TV will provide
you with years of entertainment, versatility, and satisfaction.
This User’s guide introduces you to the various features your LCD TV can offer, and provides clear and
concise information about the product, so please read it thoroughly and retain it for future reference.
Basic features and benefits
•
•
•
•
•
•
•
•
Wide Display with 1280x768 Resolution - HDTV Ready Display
Simultaneous Pre-Viewing of Programs with 4 different Picture-In-Picture Modes
Excellent Sound Enhancement with SRS WOW Technology
Elegant Remote Control
Brilliant Color with Gamma Correction
Minimized Motion Artefacts thru Noise Reduction
Sharp and Accurate Image with De-interlacing and Comb Filter
Best DVD Video Quality with 3:2/2:2 Pull Down Recovery
Packing Checklist
Your LCD TV package should contain the following accessories, in addition to the accessory box. Please
ensure that they are all present.
Remote Control (X1)
Power cord-UK (X1)
AAA Batteries (X2)
Warranty Card
SCART-Component/
AV Cable (X1)
(Component for SCART 2 only)
TV cable (X1)
SCART-SCART Cable (X1)
(for SCART 1 & 2)
Quick Guide
D-Sub cable (X1)
User Manual
7
01-lcd-tv_en_uk.indd
7
2005/5/4 ¤W¤È 08:58:54
Download from Www.Somanuals.com. All Manuals Search And Download.
Your LCD TV overview
Front panel view
INPUT
-
VOLUME
+
-
CHANNEL
+
MENU
POWER
1
2 3 4 5 6 7 8 9
#
1
Item
Description
LCD Screen
2
3
4
5
6
Input
Select source.
When OSD is on: Press this button to confirm selection
Vol Down
Vol Up
Volume Down.
When OSD is on: Also functions the same as Left directional arrow
Volume Up.
When OSD is on: Also functions the same as Right directional arrow
Channel Down
Channel Up
Channel Down.
When OSD is on: Also functions the same as Down directional arrow
Channel Up.
When OSD is on: Also functions the same as Up directional arrow
7
8
9
Menu
Power
Turn OSD menu ON/OFF
Power ON/OFF
Remote Control Window Infrared Sensor (Do not block)
8
01-lcd-tv_en_uk.indd
8
2005/5/4 ¤W¤È 08:58:58
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear panel view
1
2
3
#
1
Item
Description
RF Connector
Connects to the antenna or cable service
(TV Tuner) Input
2
AV1/SCART 1 In
Supports external VCR, DVD player with the SCART cable
(for RGB, S-Video, CVBS, Audio left/right input)
In TV mode, connect your VCR In or PVR In with the SCART cable to
record TV programs
AV1/SCART 1 Out
3
AV2/SCART 2 In
Supports external VCR, DVD player with the SCART cable
(for RGB, S-Video, CVBS, YPbPr/YCbCr, Audio left/right input)
Component (YPbPr/YCbCr) for SCART 2 only
AV2/SCART 2 Out
In TV mode, connect your VCR In or PVR In with the SCART cable to
record TV programs
Bottom view
1a 1b
2a 2b 2c 2d 3a 3b 3c
4
#
Item
Description
1a AC Switch
1b AC In
Turns AC In power ON/OFF
Connects to a power source
Connects to PC DVI Out
Connects to PC VGA Out
2a DVI-D In
2b D-Sub In
2c Audio In
In PC mode, connect to audio output of your PC or other devices with
DVI or VGA connector
2d Audio Out
Connects to another speaker
3a/b AV3/Audio In (R/L)
Connect to the audio output(R/L) of your camera, camcorder or video
game
AV3/Audio Out (R/L)
In TV mode, connect the audio(R/L) input of your VCR or PVR to record
TV programs (Please set AV3 to "Out" in OSD)
3c AV3/Video In
AV3/Video Out
Connect the composite output of your camera, camcorder or video
game
In TV mode, connect the composite input of your VCR or PVR to record
TV programs (Please set AV3 to "Out" in OSD)
4
Headphone
Connect headphone
9
01-lcd-tv_en_uk.indd
9
2005/5/4 ¤W¤È 08:59:00
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
Power
DISPLAY
MUTE
TV
AV
SCART
WIDE
PC
Sources
SLEEP
ZOOM
SRS
1
4
7
2
5
8
0
3
6
Number keys
9
ENTER
RECALL
MENU
OK
Directional pad
MPX
VOL
CH
Volume
Channel
PIP/PBP/POP
SIZE/
SWAP
INDEX
ACTIVE
POSITION
MODE
PIP/PBP/POP keys
SUBTITLE TELETEXT
REVEAL
HOLD
SIZE
MIX
SUBPAGE
Teletext keys
10
01-lcd-tv_en_uk.indd 10
2005/5/6 ¤W¤È 09:27:10
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Power button
DISPLAY
Press to turn TV on/off.
Displays channel number and input source on the upper right-hand
corner of the screen.
MUTE
TV
Press once to mute the sound; press again to restore.
Press to select TV mode.
AV
Press to select AV3 mode.
SCART
PC
Press to select SCART1/SCART2 mode.
Press once for VGA mode, press twice for DVI.
SLEEP
Press to set a time period after which the TV should switch itself to
standby. Press repeatedly to select the number of minutes.
ZOOM
SRS
Press repeatedly to switch image between
Normal
Zoom1 (1.85:1)
Zoom 2 (2.35:1)
Press to select WOW, TruBass, 3D Stereo, “Off” modes sequentially.
SRS is a technology to enhance 3D sound, bass performance and to
produce a wider sound field.
WIDE
Scaling mode (4:3 / 16:9 / Panorama / Letterbox)
Number keys from 0-9
Number keys
RECALL
Press to return to the previous channel.
Press to confirm channel selections by the number keys.
Open Menu or leave Menu.
ENTER
MENU
4-way scroll key/OK
Navigate up, down, left and right in the OSD menu / press OK to
confirm.
MPX
Press to select the sound system, displayed at the top right-hand
corner.
VOL (up/down)
CH (up/down)
e
Press these buttons to increase and decrease the volume.
Press these buttons to select the TV channel in sequence
Acer Empowering key (for Favorite Channel, Scenario Mode). See
“Empowering Key: Favorite Channels and Scenario Mode” on page
19.
PIP/PBP/POP
Switch between Normal/PIP/PBP/POP modes. See “Advanced Features”
on page 18.
SWAP
Swap primary and sub screen in toggle.
Toggle the active screen.
ACTIVE
POSITION
SIZE/MODE
Change position of subscreen in PIP mode
When in PIP mode: Change subscreen size 25%, 37.5%, 50%
When in POP mode: Change POP mode 1+5 / 1+12
The teletext button descriptions can be found on page 17.
11
01-lcd-tv_en_uk.indd 11
2005/5/4 ¤W¤È 08:59:01
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic connection
Connecting the power cord
1
Connect the AC cord into the AC input on the back of the set.
2
Connect the male plug to the wall outlet as shown.
Connecting an antenna
Connect the outdoor antenna cable lead-in to the antenna terminal on the back of the TV set as shown.
12
01-lcd-tv_en_uk.indd 12
2005/5/4 ¤W¤È 08:59:02
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting VCR/DVD/AV equipment with a SCART-SCART
cable
Connect SCART-SCART cable as shown below.
or
or
VCR
DVD
AV
Connecting VCR/DVD/AV equipment with a SCART-
component/AV cable
Connect SCART-component/AV cable to SCART2 port as shown below.
Audio
Video
G R B
or
Y
W
R
or
Component (YPbPr/YCbCr)
for SCART 2 only
or
VCR
DVD
AV
13
01-lcd-tv_en_uk.indd 13
2005/5/4 ¤W¤È 08:59:02
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a camera, camcorder or video game
Connect your camera or camcorder to the Video/Audio ports on the bottom of the TV set as shown below.
camera, camcoder, video games
INPUT
-
VOLUME
+
-
CHANNEL
+
MENU
POWER
Video Audio
Audio Video
L
R
R
L
Y
W
R
R
W
Y
Connecting a headphone
Connect headphone to the headphone input on the bottom of the TV set as shown below.
INPUT
-
VOLUME
+
-
CHANNEL
+
MENU
POWER
14
01-lcd-tv_en_uk.indd 14
2005/5/4 ¤W¤È 08:59:04
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started watching your TV
Power On
Changing channels
a. Turn on power switch on bottom of TV.
1
Press 0-9 on the remote control to select a
channel. The channel changes after 2 seconds.
Press ENTER to select the channel immediately.
b. Press the power button, number keys or chan-
nel up/down button on remote control
1
2
5
8
0
3
6
ENTER
a
b
4
7
1
2
5
8
0
3
6
4
7
9
9
ENTER
RECALL
ENTER
RECALL
CH
O
I
2
You can also change the channels by pressing
and holding the Channel Up/Down button on
the remote control. Up will increase the num-
ber, while down will decrease the number.
CH
Setup Wizard
The first time you power on the TV, the setup
wizard will guide you to complete the "language
selection" and "channel scanning" setp by step.
Adjusting the volume
Step 1. Please plug in the tuner coaxial cable and
then press "OK" key
Adjust the volume using the VOL +/- button on the
remote control. Up will increase the volume, while
down will decrease the volume.
Step 2. Auto Scanning, please wait
Setup completed
VOL
You can also adjust these settings using
the front control panel. Please see “Front
panel view” on page 8 for details.
15
01-lcd-tv_en_uk.indd 15
2005/5/4 ¤W¤È 08:59:08
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Navigation
Many of the advanced settings and adjustments are available through using the OSD (on screen display)
menus, as shown in the example screenshot below.
Basic operations required to navigate these menus (Picture, Audio, Settings, Options, Empowering) are
described in this section. The first time you access the OSD, you will be asked to choose your language set-
tings.
You can also interact with these menus using the front panel controls. Please see “Front panel
view” on page 8 for details.
Navigating the OSD with Remote Control
There are five main OSD menus. These are: Picture
, Audio
, Settings
, Options
and Em-
powering . Use the following method to easily navigate these menus.
1
Press the “Menu” button on the remote control or the “Menu” button on the control panel.
MENU
2
Select your desired menu by using the Left/Right sides of the directional pad to switch between the
five menus.
OK
3
Use the directional pad to interact with the menu. The Up/Down directions will scroll through the
menu options, while Left/Right will adjust the different settings (for exmample, in the Picture menu,
settings such as brightness, contrast, etc). If there are no adjustments, press Enter to select.
16
01-lcd-tv_en_uk.indd 16
2005/5/4 ¤W¤È 08:59:08
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext
Most TV channels also broadcast information via the teletext feature. This Acer LCD TV has 252 pages of
memory which will store pages and subpages, thereby reducing waiting time. The teletext buttons on the
remote control are listed below.
Item
Description
INDEX
Go to index page
SUBTITLE
Show subtitle on the screen
TELETEXT
Press to switch from TV/AV to Teletext mode.
Press to reveal hidden teletext information.
Press once to zoom teletext page to 2X; press again to resume.
Press to overlay teletext page on the TV image, i.e. subtitle.
Press to pause the current teletext page in multi-page viewing mode.
Operates corresponding button on the teletext page.
REVEAL
SIZE
MIX
HOLD
Color buttons (R/G/Y/B)
17
01-lcd-tv_en_uk.indd 17
2005/5/4 ¤W¤È 08:59:08
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
PIP/PBP/POP
PBP
1. Press the "TV/SCART/AV/PC" keys, number keys
or "CH up/down" key to change the content of
the PBP screen.
PIP/PBP/POP
SIZE/
MODE
SWAP
INDEX
ACTIVE
POSITION
2. Press “Swap” key to change the content be-
tween the primary and the PBP screen.
SUBTITLE TELETEXT
REVEAL
Swap
In TV, AV, SCART and PC mode, press PIP/PBP/POP
button once to display the picture in picture (PIP).
Press twice to display picture by picture (PBP).
PBP
PBP
POP
PIP
1. Press “Activate” key to activate the TV channel
on the top-left POP screen.
PBP
PBP (Picture by Picture)
PIP (Picture in Picture)
2. Press the number keys or “CH up/down” key
to change the TV channel of the top-left POP
screen. Then, press the “activate” key again.
The other POP screens will show the following
channels in sequence.
In SCART(YPbPr/YCbCr) and PC(VGA, DVI) mode,
press PIP/PBP/POP button three times to display
picture on picture (POP). Then, the POP screens will
display the TV channel programs one by one.
3. Press the "Size/Mode" key to access the 1 + 5 or
1+12 picture on picture mode as shown in the
image below.
POP
POP
POP
POP
POP
POP POP POP POP
POP
POP
POP
POP
POP
POP
POP
POP
POP
POP (Picture on Picture)
PIP
POP POP POP POP
1. Press the "TV/SCART/AV/PC" keys, number keys
or "CH up/down" key to change the content of
the PIP screen.
Parental Control
2. Press “Swap” key to change the content be-
tween the primary and the PIP screen.
When in TV mode, you can find a Parental Control
feature in the Options menu. Enter a four-
digit PIN number using the number keys on your
remote control. Use this number to adjust the Pa-
rental Control settings, to prevent access to certain
channels.
PIP
PIP
Swap
3. Press “Position” key to select the location of
the subscreens, from Upper Left -> Upper Right
-> Lower Right -> Lower Left, as shown in the
image.
If you forget your PIN number, please enter 6163
to reset.
PIP
PIP
PIP
PIP
4. Press the “Size/Mode” key to change the size
of the PIP screen between 25%, 37.5%, 50%
PIP
18
01-lcd-tv_en_uk.indd 18
2005/5/6 ¤W¤È 09:28:03
Download from Www.Somanuals.com. All Manuals Search And Download.
Empowering Key: Scenario Mode and Favorite Channels
Use the OSD to define your “e” Empowering key setting: Scenario mode and Favorite channel. The de-
fault value for the “e” key is the Scenario mode. Use the following method: Menu -> Empowering -> e
Key Setting. Choose between “Favorite channel” or “Scenario Mode”. Now, when you press the “e” key,
your chosen selection will be accessed.
Scenario Mode
Press the“e”Empowering key and use the Scenario Mode to select pre-defined audio and video settings
for optimal enjoyment of the following scenarios: Standard, Movie, Sport, Concert, Game, User.
Mode
Scenario Mode Design Direction
Standard mode allows you to watch your favourite channels with sharp, brilliant
imagery via adaptive brightness and contrast adjustments. Clear-sounding audio is
provided by 3D Stereo performance.
Standard
For comfortably enjoying movies at home, Movie mode displays dim scenes in
clear detail; compensates for colour; and smoothly presents motion images. This
is accomplished through optimal Gamma correction plus saturation, brightness
and contrast adjustments. Movie mode makes the most of high-definition movie
soundtracks by using SRS WOW technology.
Movie
Game
Game mode carefully details the exquisite graphics of modern video games, pro-
viding lifelike entertainment while protecting your eyesight by adjusting bright-
ness and contrast. What’s more, Game mode provides a heightened audio experi-
ence via SRS WOW technology.
Sports mode is suited for outdoor sports programmes, with accurate background
depth and clear gradation between the bright, outdoor playing field and darker
auditoriums. Sports mode also brilliantly enhances colours and presents swiftly
moving pictures without residual images. All of this is achieved via specific Gamma
corrections and saturation adjustments. Precise audio can be heard, thanks to Tru-
Bass performance.
Sports
Concert mode places you in a virtual concert hall, opera house or other dim envi-
ronment by means of adaptive brightness and contrast adjustments. Concert mode
accentuates symphonic harmonies and the tenor audio range using SRS WOW
technology.
Concert
19
01-lcd-tv_en_uk.indd 19
2005/5/4 ¤W¤È 08:59:10
Download from Www.Somanuals.com. All Manuals Search And Download.
Favorite Channels
Please note that Scenario mode is the default value for the “e” Empowering key. In order to make use of
the following instructions, please set Favorite channel as the default using the method described on the
previous page.
Storing favorite channels
For quick access to your favorite channels, use the following method:
•
To store a channel in memory for quick access, select your desired channel, then press and hold the “e”
Empowering key on the remote control for more than 2 seconds. This will store the TV program infor-
mation at the bottom of the favorite list.
•
•
There are a total of five slots in which you can store TV programs.
If there is no empty slot in the favorite list, the first program will be wiped out and the new TV pro-
gram is added at the bottom of the favorite list. Simply put, it’s “First in, first out”.
•
•
When the current program is stored in the favorite list, pressing the “e” key for more than 2 seconds
will remove the program from the favorite list.
To view currently stored favorite channels, press the “e” Empowering key. You will see a screen similar
to the one shown below.
Viewing your favorite channels
•
On the remote control, if you press the “e” Empowering key for less than 1 second, the favorite chan-
nel table will pop up. Your currently selected favorite channel will be highlighted. To view your other
favorite channels, press the “e” Empowering key again to toggle the TV programs sequentially accord-
ing to your favorite list.
20
01-lcd-tv_en_uk.indd 20
2005/5/4 ¤W¤È 08:59:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Before you call the Acer service center, please check the following items:
The following is a list of possible situations that may arise during the use of your LCD TV. Easy answers
and solutions are provided for each one.
There is no picture or sound.
•
•
•
•
•
•
•
Make sure the power cord is properly inserted in the power outlet.
Make sure the input mode is correctly set by your selected input.
Make sure the antenna at the rear of the TV is properly connected.
Make sure the main power switch is turned on.
Make sure the volume is not set to minimum or the sound is not set to mute.
Make sure the headphones are not connected.
Reception other than those of broadcasting stations can be considered.
Picture is not clear.
•
•
•
Make sure the antenna cable is properly connected.
Consider whether TV signals are being properly received.
Poor picture quality can occur due to A-VHS camera or camcorder and other peripheral connections at
the same time. Switch off one of the other peripheral.
•
•
The ‘ghost’ or double image may be caused by obstruction to the antenna due to high rise buildings
or hills. Using a highly directional antenna may improve the picture quality.
The horizontal dotted lines shown on the pictures may be caused by electrical interference, e.g. hair
dryer, nearby neon lights and etc. Turn off or remove these equipment.
Picture is too dark, too light or tinted.
•
•
•
•
Check the color adjustment.
Check the brightness setting.
Check the sharpness function.
Fluorescent lamp may have reached the end of service life.
Remote control does not work.
•
•
•
•
Check the batteries of the remote control.
Make sure the remote sensor window is not under strong fluorescent lighting.
Try to clean the remote control sensor lens on the TV with a soft cloth.
Use the buttons (hot keys) on the TV before the remote control works.
If the above items do not solve your technical issue, please refer to the warranty card for service
information.
21
01-lcd-tv_en_uk.indd 21
2005/5/4 ¤W¤È 08:59:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Product specifications
Item
Specification
Panel spec
Mechanical
Resolution
1280 x 768
Dimensions(WxHxD mm)
Swivel angle
Weight (kg)/(lb)
Wall mounting
Destination
Color system
Sound system
Stereo system
Destination
AV1/SCART1
AV2/SCART2
AV3
828 x 484 x 248
-20~+20
14/30
Yes (mounting kit not included)
TV system
Terminal
Europe
PAL/SECAM
B/G/D/K/I/L
NICAM/FM stereo (A2)
Europe
SCART (CVBS,RGB,S-Video,Audio R/L)
SCART (CVBS,RGB,S-Video,YPbPr/YCbCr,Audio R/L)
CVBS,Audio R/L
PC D-sub
YES
DVI-D(HDCP)
PC audio in
YES
YES
Audio system
Power supply
3D surround
Speaker
YES
5W+5W
SRS
WOW, TruBass, 3D Stereo
150W
Max. power consumption
22
01-lcd-tv_en_uk.indd 22
2005/5/4 ¤W¤È 08:59:11
Download from Www.Somanuals.com. All Manuals Search And Download.
|