Advanced Diabetes Management System
User’s Guide
For in vitro diagnostic use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Welcome
1
1
2
Important Things to Know about
Your Precision Xtra Advanced Diabetes
Management System
3
Intended Use
3
How Your Precision Xtra Advanced Diabetes
Management System Works
Precision Xtra Kit Contents
4
5
6
Getting to Know Your Monitor’s Features
Setting Up Your Precision Xtra Monitor
9
Buttons to Use
Setup Options
9
9
How to Set the Beeper, Date, Time, & View
Measurement Units
Set Beeper
11
11
13
15
18
19
20
Set Time
Set Date
Set Time Format
Set Date Format
Blood Glucose Measurement Units
3
4
Calibrating Your Precision Xtra Monitor
Why Calibrate Your Monitor?
When to Calibrate Your Monitor
What You Will Need
How to Calibrate Your Monitor
How to Recall the LOT Number or Calibration CODE
22
22
22
23
23
28
Monitoring Your Blood Glucose
30
What You Will Need
30
Important Information about Monitoring
Your Blood Glucose
How to Monitor Your Blood Glucose
Understanding Your Result
30
31
39
5
Monitoring Your Blood ß-Ketone
43
What You Will Need
43
Important Information about Monitoring
Your Blood ß-Ketone
44
45
52
How to Monitor Your Blood ß-Ketone
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding Your Result
6
7
Doing A Control Solution Test
Why Do A Control Solution Test?
When Is Doing A Control Solution Test Recommended?
Important Information about Control Solution Testing
What You Will Need
How to Do Control Solution Testing
Understanding Your Result
55
55
55
55
57
57
64
Reviewing & Using Your Results
65
What Can Your Monitor Show You?
How to See Results in Memory
How to See Averages
65
66
69
71
Transferring Your Results to A Computer
8
9
Understanding & Troubleshooting
Error Messages
What An Error Message Means &
What You Need to Do
72
72
Your Monitor’s Specifications
& Limitations
77
Important Information about Using Blood
Samples from the Forearm, Upper Arm,
or Base of the Thumb
80
10 Caring For Your Monitor
82
Cleaning Your Monitor
Replacing Your Monitor’s Battery
82
83
11 Support, Guarantee & Limited Warranty
References
87
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Thank you for choosing the Precision Xtra™
Advanced Diabetes Management System.
Important steps for using the System are inside this
guide. Please read it carefully.
Your new Precision Xtra Advanced Diabetes
Management System is an important tool that can
help you better manage your diabetes. The System
measures both blood glucose (sugar) and blood
ß-Ketone. Blood glucose and blood ß-Ketone results
can help you understand your diabetes and what
happens with:
•Food
•Exercise
•Stress and illness
•Diabetes medications
Always monitor your blood glucose and
blood ß-Ketone according to your healthcare
professional’s recommendations.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
In the United States, call Customer Care at
1-800-527-3339 with any questions you may have
about the Precision Xtra Advanced Diabetes
Management System. We are available 24 hours a
day, 365 days a year. If you cannot reach Customer
Care, contact your healthcare professional.
Outside the United States, please contact your
local Abbott Laboratories, Abbott Diabetes Care
office or distributor.
Please read the following items before using
your Precision Xtra Advanced Diabetes
Management System:
•User guide
•Blood glucose test strip instructions for use
•Blood ß-Ketone test strip instructions for use
•Lancing device instructions for use and
other information
•Warranty card
IMPORTANT:
Any user guide text shown
in a shaded box like this one
is important information.
Please pay special attention
to these boxes.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 1
Questions? Call
Customer Care:
1-800-527-3339
Important Things
to Know about
Your Precision Xtra
Advanced Diabetes
Management System
Intended Use
Your Precision Xtra System:
•Is indicated for home (lay user)
or professional use in the
management of Patients
with diabetes.
•Is for use outside the body
(in vitro diagnostic use).
•Is for monitoring glucose
in fresh whole blood (for
example, from the fingertip).
•Is for monitoring ß-Ketone
in fresh whole blood from
the fingertip.
•Measures ß-hydroxybutyrate
(ß-Ketone), the most
important of the three
ketone bodies circulating in
the bloodstream.
™
•Is for use with Precision Xtra
or Precision POC Blood
™
Glucose Test Strips and
™
Precision Xtra Blood
ß-Ketone Test Strips.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
™
™
• Precision Xtra and Precision
POC Blood Glucose Test Strips
are different. Please refer to
your test strip instructions for
use for important information
about sample types that may
be used with these test strips.
™
• Precision POC Blood Glucose
Test Strips are for use by
healthcare professionals only.
Potential Infection Risk:
Healthcare professionals performing
blood tests with this system on
multiple patients must always wear
gloves and should follow the
infection control policies and
procedures approved by their facility.
How Your Precision Xtra
Advanced Diabetes
Management System Works
When you insert a test strip into
your monitor, the Apply Blood
message shows on your monitor’s
display window. When a blood
sample or control solution sample is
applied to the test strip, the glucose
or ß-Ketone reacts with the
chemicals on the test strip.
This reaction produces a small
electrical current that is
measured. The result shows on
your monitor’s display window.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Precision Xtra
Kit Contents
Precision Xtra Monitor
Precision Xtra User’s Guide
– Contains system information
and directions.
Carrying Case
– Use this to store and carry
your monitor and other
monitoring supplies.
Your kit may also contain:
Precision Xtra Quick
Reference Guide
– Gives the basic steps to calibrate
your monitor and check your
blood glucose.
Logbook
– Use this to record your test
results, activities, and medications.
Precision Friends for
Life Card
– Please fill this out and return to
the address provided to activate
your warranty. Filling out this card
helps to ensure that you receive
any updates regarding your
Precision Xtra monitor.
Lancing Device, Lancets,
Instructions for Use and
Other Information
Blood Glucose Test Strips
and Instructions for Use
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Items not included:
MediSense Control Solutions
Blood ß-Ketone Test Strips
and Instructions for Use
Data Management System
Backlight
Button
Display
Getting to Know Your
Monitor’s Features
Window
Back
Button
Display Window
This shows:
•Blood glucose and blood
ß-Ketone results
•Glucose LOT numbers and
ß-Ketone calibration CODEs
•Previous test results and
error messages
Mode
Button Button
Forward
Strip
Port
•Blood glucose averages
IMPORTANT:
Each time you turn your
monitor on, a full display shows.
This is called a Display Check.
Look at the Display Check each
time it appears on your
monitor’s display window,
especially before you check
your blood glucose or blood
ß-Ketone. The Display Check
shows on the display
window briefly.
Display Check
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not use the monitor if the
monitor Display Check does
not exactly match the picture
here (for example, if you see
a "3" instead of an "8").
The monitor may show an
incorrect result when you use
it. Please call Customer Care
for assistance.
Strip Port
This is where you insert:
•A blood glucose test strip
•A blood ß-Ketone test strip
•A glucose calibrator
•A ketone calibrator
•Data cable (not included)
for uploading results to
a computer
Mode Button
Use this button to:
•Turn monitor ON and OFF
•Access monitor setup options
•Access and save
monitor settings
•Access previous results
and averages
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Forward Button
Back Button
Use these buttons to:
•Review and select
monitor settings
•Review results and averages
Backlight Button
Use this button to:
•Turn backlight ON and OFF
Battery Compartment
This is where the battery
is installed.
•If your monitor does not turn
on, check that your battery is
installed properly.
•For new battery installation,
see Chapter 10.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2
Setting Up Your
Precision Xtra Monitor
Questions? Call
Customer Care:
1-800-527-3339
Buttons to Use
Mode Button
Forward Button
Back Button
Setup Options
Set Beeper
If the beeper is set ON, it will
beep when:
•The calibrator is fully inserted
•The test countdown starts
•The test countdown finishes
Set Time, Set Date
Important: Set the correct
time and date before you use
the monitor for the first time.
This will help you keep records
of when you monitor and will
help you and your healthcare
professional make informed
decisions about your care.
You must set the time and
date to review averages.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
You may need to re-set the
time and date:
•After you replace the battery.
•When you travel between
time zones or when the time
zone you are in changes.
In "Set Date", you set the year,
month, and day.
Set Time Format
In "Set Time Format", you
choose how the time shows on
the monitor’s display window.
Set Date Format
In "Set Date Format", you
choose how the month and
day show on the monitor’s
display window.
Measurement Units
Blood glucose measurement
units are factory-set in
mg/dL or mmol/L.
Blood ß-Ketone measurement
units are in mmol/L only.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Set the Beeper,
Date, Time, & View
Measurement Units
To begin, pull the battery tab
out. Your monitor should be
turned OFF.
Before you start, please
note: "Press and Hold" means
that you press the button in for
at least 2 seconds. "Press and
Release" means that you press
the button and let it go quickly.
Press and Hold the
button
to turn the monitor off and
save your settings at any time.
The monitor automatically turns
off after 30 seconds of
no action.
If you like the setting that you
see on your monitor and do
not want to change it, Press
Beeper ON
and Release the
button to
move to the next setup option.
Set Beeper
The means the beeper is ON.
The means the beeper is OFF.
Beeper OFF
11
Download from Www.Somanuals.com. All Manuals Search And Download.
To turn your monitor ON,
1Press and Hold the
button.
The beeper ON message
shows on the display
window. The musical
notes flash on and off,
and the monitor beeps.
To change the beeper setting,
2Press and Release the
button or the
once.
button
Press and Release the
3button to save the beeper
setting and to move to Set
Time (Hour).
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Time
Hour:
The Hour flashes on and off.
Press and Release the
1button to move the
hour forward.
If you go past the correct
2hour, Press and Release
the
button to move
the hour back.
Press and Release the
3button to save the
hour and to move to
Set Minutes.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Minutes:
The Minutes flash on
and off.
Press and Release the
1button to move the
minutes forward.
If you go past the correct
2minute, Press and Release
the button to move the
minutes back.
Press and Release the
3button to save the minutes
and to move to Set Date.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Date
Year:
The Year flashes on and off.
Press and Release the
1button to move the
year forward.
If you go past the correct
2year, Press and Release the
button to move the
year back.
Press and Release the
3button to save the year
and to move to Set Month.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Month:
The Month flashes on
and off.
Press and Release the
1button to move the
month forward.
If you go past the correct
2month, Press and Release
the
button to move the
month back.
Press and Release the
3button to save the month
and to move to Set Day.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Day:
The Day flashes on and off.
Press and Release the
1button to move the
day forward.
If you go past the correct
2day, Press and Release the
button to move the
day back.
Press and Release the
3button to save the day
and to move to Set
Time Format.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Choice #1
Set Time Format
You have two choices:
Choice #1: For the 12-hour
format, AM or PM shows.
Choice #2: For the 24-hour
format, AM or PM does
not show.
Choice
#2
To change the Time Format,
1Press and Release the
button or the
once.
button
Press and Release the
2button to save the Time
Format and to move to Set
Date Format.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Date Format
You have two choices:
Choice #1: For the month-
day format, "-" shows with
the date.
Example:
"May 25" shows as "5-25".
Choice #2: For the day.month
format, " " shows with
•
the date.
Example:
"25 May" shows as "25.5".
To change the Date Format,
1Press and Release the
button or the
button once.
Press and Release the
2button to save the Date
Format and to move to
Measurement Units.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Blood Glucose
Measurement Units
Consult your healthcare
professional if you have
any questions about blood
glucose measurement units.
This screen shows the blood
glucose measurement units
(mg/dL or mmol/L).
Press and release the
to return to Set Beeper.
button
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Press and Hold the
button to turn your
monitor off.
You have successfully set
up your monitor.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3
Questions? Call
Customer Care:
1-800-527-3339
Calibrating Your
Precision Xtra Monitor
Why Calibrate
Your Monitor?
Your Precision Xtra monitor
must be calibrated so that it
can recognize the test strip
you are using. Calibration
ensures that your results
are accurate.
When to Calibrate
Your Monitor
• When you use the monitor for
the first time.
• EACH time you open and use a
new box of blood glucose or
blood ß-Ketone test strips.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
What You Will Need
• Precision Xtra monitor
• For glucose calibration:
Blood glucose test strip
Blood glucose test strip
instructions for use
Blood glucose test
strip calibrator
• For ß-Ketone calibration:
Blood ß-Ketone test strip
Blood ß-Ketone test strip
instructions for use
Blood ß-Ketone test
strip calibrator
How to Calibrate
Your Monitor
When you insert a test strip for
the first time, the display
window shows:
This means the monitor is not
calibrated for blood
glucose monitoring.
➡
This means the monitor is not
calibrated for blood
ß-Ketone monitoring.
➡
23
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT:
•Use only the calibrator that is
packaged in the box of test
strips you are using.
•Do not use test strips that
have expired. Check the
expiration date on the test
strip foil packet and test strip
box. If only the year and
month are shown, the
expiration date is the last
day of the month.
Remove the glucose or
1ß-Ketone calibrator package
from the new box of
test strips.
Open the calibrator
2package. Find the three
raised bumps on the
calibrator package. Peel the
clear cover away from the
three raised bumps.
4. the the . it in until it stops.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Hold the calibrator with the
3LOT number (glucose) or
calibration CODE
(ß-Ketone) facing you.
Glucose
Insert the calibrator into
4the strip port. Push it in
until it stops.
The Display Check shows
on the display window,
followed by the time,
month, and day.
Next, the LOT number
(glucose) or calibration
CODE (ß-Ketone) shows
on the display window.
a. Example of glucose LOT
number: LOT 13758
b. Example of ß-Ketone
calibration CODE: CODE JC7
Then you hear the beeper, if
the beeper is ON.
ß-Ketone
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Check that the LOT number
5or calibration CODE on all
these items matches:
✓ Display window
✓ Test strip calibrator
✓ Test strip instructions for use
✓ Test strip foil packet
When the LOT number or
calibration CODE on all
these items matches:
What It Means:
Calibration is complete.
What to Do:
You may now monitor
your blood glucose or
blood ß-Ketone.
When the LOT number or
calibration CODE on all these
items DOES NOT match:
What It Means:
Your monitor may not be
calibrated for the box of test
strips you are using.
What to Do:
•Check that you are using the
calibrator that came in the box
of test strips you are using.
•Try to calibrate again.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT: If the LOT
number or calibration CODE
still does not match, contact
Customer Care. Do not
attempt to monitor your blood
glucose or blood ß-Ketone.
Your monitor may show an
incorrect result.
Remove the calibrator from
6the monitor and store it in
your monitor’s carrying case.
IMPORTANT: Do not throw
the calibrator away until you
have used all of the test strips
in the box.
If you have any trouble
calibrating your system, please
contact Customer Care.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Recall the
LOT Number or
Calibration CODE
To recall the glucose LOT
1number, Press and Hold the
button. While holding the
button, Press and Hold
the button.
The Display Check shows on
the display window, then the
glucose LOT number shows
with the time, month, and
day of the most recent
glucose calibration.
After the glucose LOT
2number is displayed, you
can recall the ß-Ketone
calibration CODE. Press and
Release the
the button.
button or
The ß-Ketone calibration CODE
shows with the time, month,
and day of the most recent
ß-Ketone calibration.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: If the LOT number or
calibration CODE that shows
on your monitor’s display
window is not correct:
What It Means:
Your monitor may not be
calibrated for the box of test
strips you are using.
What To Do:
•Re-calibrate your monitor.
•Check that you are using
the calibrator that came in
the box of test strips you
are using.
Remember, improper
calibration will cause
incorrect results.
Press and Hold the
3button to turn your
monitor off.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 4
Questions? Call
Customer Care:
1-800-527-3339
Monitoring Your
Blood Glucose
What You Will Need
•Blood glucose test strip with
its instructions for use
•Precision Xtra monitor
calibrated to match the LOT
number of the blood glucose
test strip you are using
•Lancing device and a new,
sterile lancet
Important Information
about Monitoring Your
Blood Glucose
•Do not use out-of-date test
strips. Check the expiration
date printed on the test strip
box and on each test strip foil
packet. If only the month and
year are printed on the test
strip, then the expiration date
is the last day of that month.
C5
L O T 13758
E X P 2006/03
Example:
Expiration date
March 31, 2006
•For more detailed information
about your test strip, please
read its instructions for use
before monitoring.
•Use the test strip
immediately when you
take it out of its foil packet.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
•Do not use a wet, bent,
scratched, or damaged
test strip.
•Do not use the test strip if its
foil packet has a puncture or
tear in it.
•Before you monitor your
blood glucose or blood
ß-Ketone, allow your monitor
and test strip to reach the
recommended operating
range of the test strip. The
test strip operating range is in
the “Limitations of Procedure”
section of your blood glucose
test strip instructions for use.
•Read the lancing
device instructions for use.
How to Monitor Your
Blood Glucose
Getting Started
Prepare your lancing device.
1
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Wash your hands using
2warm soapy water and
dry them completely.
Remove the test strip from its
3foil packet.
Note: For pictures that show
how to open the blood
glucose test strip foil packet,
please see the information
card in the box of blood
glucose test strips.
Insert the three black lines at
4the end of the test strip into
the strip port.
Push the test strip in until
5it stops.
The monitor turns on automatically.
These items show on the display
window, one after the other:
•Display Check – Remember to
make sure that all items in the
picture here show on the display
window. (See Chapter 1 for
more information about the
Display Check.)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
•Time, month, and day (if set)
If date and time are not
set, dashes will show instead
of numbers.
•LOT number for the box of
blood glucose test strips
you are using.
•Apply Blood message, which
tells you that the monitor is
ready for you to apply blood
to the blood glucose test strip.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Obtaining A Blood Drop
Use your lancing device to
obtain a blood drop.
Recommendations for
Obtaining a Blood Drop
Fingertip sampling
•To obtain a sample from an
alternative site (forearm, upper
arm, or base of the thumb),
use an appropriate alternative
site lancing device.
•Before you obtain a blood
sample from the fingertip,
forearm, upper arm, or base
of the thumb, make sure the
sample site is clean, dry, and
warm. To warm the sample
site, wash it in warm water,
rub the skin vigorously for a
few seconds, or apply a warm
pad to it.
Forearm sampling
•Hang your arm down before
pricking your finger or the
base of the thumb to help
blood flow.
Upper arm sampling
•To obtain a blood sample from
the arm, use a fleshy area
away from bone. Avoid areas
where there is a lot of hair.
•Avoid squeezing the
puncture site.
•Apply the blood sample to the
test strip immediately.
Base of thumb sampling
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Lancets and Lancing Device
•Lancets are for one-time use
only. Use a new lancet each
time you monitor.
•Discard your used lancet
properly. Put it in an empty
puncture-resistant container,
such as a plastic milk carton or
detergent bottle.
•Never share your lancing
device or lancet with
another person.
Applying the Blood Drop to
the Test Strip
Touch the blood drop to the
1white area at the end of the
test strip. The blood is
drawn into the test strip.
Note: If the monitor shuts off
before you apply blood to the
test strip, remove the test strip
from the monitor and try again.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Status bar
Continue to touch the blood
2drop to the end of the test
strip until the monitor
begins the test. The monitor
begins the test when:
•You hear the beeper, if the
beeper is ON.
•The display window shows
the status bar.
•Then the display window
shows the countdown.
Note: Do not remove the test
strip from the monitor or
disturb the test strip during
the countdown.
Countdown
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Important: If the countdown
does not start:
Correct
What It Means:
✔
You might not have applied
enough blood to the test strip.
What to Do:
•Apply a second drop of blood
to the test strip. Refer to your
test strip instructions for use
for the number of seconds you
have to apply a second drop.
Apply second drop
•If the countdown still does not
start, or if the number of
seconds you have to apply a
second drop have passed,
discard the test strip, turn off
your monitor, and try again
with a new test strip.
At the end of the
3countdown:
•If the beeper is ON, listen for
the beeper.
•The blood glucose result
shows on the display window.
•The result is stored in your
monitor’s memory. You may
also write the result
in your logbook.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Shutting Off Your Monitor
Removing the test strip from
1the strip port turns off the
monitor. You can use the
opened foil packet to
remove and discard your
used test strip.
Discard the test
2strip properly.
Note: You may also turn the
monitor off by Pressing and
Holding the button. If you
do not turn your monitor off or
pull the test strip out, the
monitor shuts off automatically
after 60 seconds.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding
Your Result
"LO" Result
What It Means:
Your monitor has determined
that your blood glucose result
is lower than 20 mg/dL (1.1
mmol/L) or there may be a
problem with the test strip.
What to Do:
Monitor your blood glucose
again with a new test strip. If
LO shows on the display
window again, contact your
healthcare professional
immediately.
Result 300 mg/dL or Higher
When your blood glucose result
is 300 mg/dL (16.7 mmol/L) or
higher, KETONES? flashes on
and off on the display window.
What to Do:
If you check your ketones
as part of your diabetes
management program, it
is recommended that you
check your blood ß-Ketone.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
"HI" Result
What It Means:
Your monitor has determined
that your blood glucose result
is higher than 500 mg/dL
(27.8 mmol/L) or there may
be a problem with the
test strip.
What to Do:
Monitor your blood glucose
again with a new test strip. If
HI shows on the display
window again, contact your
healthcare professional
immediately.
If you check your ketones
as part of your diabetes
management program, it
is recommended that you
check your blood ß-Ketone.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
"E-4" Result
What It Means:
Your blood glucose may be too
high to be read by the system,
or there may be a problem with
the test strip.
What to Do:
Monitor your blood glucose
again with a new test strip. If
E-4 shows on the display
window again, contact your
healthcare professional
immediately.
Important:
It is recommended that you
repeat the blood glucose test
with a new test strip when:
•LO shows on the
display window.
•You obtain a low blood
glucose result, but you do
not have symptoms of low
blood glucose.
•Your monitor displays a blood
glucose result that is unusually
low, lower than 50 mg/dL
(2.8 mmol/L).
41
Download from Www.Somanuals.com. All Manuals Search And Download.
•HI shows on the
display window.
•You obtain a high blood
glucose result, but you do
not have symptoms of high
blood glucose.
•Your monitor displays a
result that is unusually high,
higher than 300 mg/dL
(16.7 mmol/L).
•You question your result.
Important:
A result that is incorrect may
have a serious medical
outcome. Consult your
healthcare professional before
changing your diabetes
medication program.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 5
Questions? Call
Customer Care:
1-800-527-3339
Monitoring Your
Blood ß-Ketone
It is important to check your
ketones when:
•You have an illness.
•Your blood glucose is
higher than 300 mg/dL
(16.7 mmol/L).
•You are experiencing unusual
blood glucose results.
•You and your healthcare
professional determine that it
is necessary.
What You Will Need
•Blood ß-Ketone test strip with
its instructions for use
•Precision Xtra monitor
calibrated to match the
calibration CODE of the
blood ß-Ketone test strip you
are using
•Lancing device and a new,
sterile lancet
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
about Monitoring Your
Blood ß-Ketone
•For more detailed information
about your blood ß-Ketone test
strip, please refer to its
instructions for use
before monitoring.
•Do not use out-of-date test
strips. Check the expiration date
printed on the test strip box and
on each test strip foil packet.
70208
2006/03/09
JC7
0.3-0.7 mmol/l
1.9-2.9 mmol/l
3.7-5.7 mmol/l
ß-Ketone Test Strip
Abbott Laboratories
Abbott Diabetes Care
Alameda, CA 94502
USA
.
•Do not put urine on the
blood ß-Ketone test strip.
Example:
Expiration date
March 9, 2006
•Use the test strip immediately
when you take it out of its
foil packet.
•Do not use a wet, bent,
scratched, or damaged
test strip.
•Do not use the test strip if its
foil packet has a puncture or
tear in it.
•Use each test strip only once.
•Before you monitor your blood
glucose or blood ß-Ketone, allow
your monitor and test strip to
reach the recommended
operating range of the test strip.
The test strip operating range is
in the “Limitations of Procedure”
section of your blood ß-Ketone
test strip instructions for use.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
•Read the lancing device
instructions for use.
•The blood ß-Ketone test strip
foil packet contains a
desiccant tablet (Zeolite -
Sodium Calcium
Aluminosilicate). Although
this material is not
considered dangerous1,
the following safety advice
should be observed:
1. Keep away from children.
2. Do not expose to water as
product gets hot and could
cause burns.
3. Do not eat, and avoid
contact with eyes and skin.
May cause burns to the
mouth and throat.
4. If swallowed, drink two
glasses of water. Seek
medical help.
How to Monitor Your
Blood ß-Ketone
Getting Started
Prepare your lancing device.
1
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Wash your hands using
2warm soapy water and dry
them completely.
Remove the test strip from
3its foil packet.
Insert the three black lines
4at the end of the test strip
into the strip port.
Push the test strip in until
5it stops.
The monitor turns
on automatically.
These items show on the display
window, one after the other:
•Display Check – Remember to
make sure that all items in the
picture here show on the
display window. (See Chapter
1 for more information about
the Display Check.)
46
Download from Www.Somanuals.com. All Manuals Search And Download.
•Time, month, and day (if set)
If date and time are not set,
dashes will show instead
of numbers.
•Calibration CODE for the
box of blood ß-Ketone test
strips you are using.
•KETONE and Apply Blood
message, which tell you that
the monitor is ready for you to
apply blood to the blood
ß-Ketone test strip.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Obtaining A Blood Drop
Use your lancing device to
obtain a blood drop.
Important: Blood ß-Ketone
test strips have not been
evaluated for alternative site
monitoring. Use only
fingertip blood samples for
blood ß-Ketone monitoring.
Fingertip sampling
Recommendations for
Obtaining A Blood Drop
•Before you obtain a blood
sample from the fingertip,
make sure the sample site is
clean, dry, and warm. To
warm the sample site, wash it
in warm water or rub the skin
vigorously for a few seconds.
•Hang your arm down before
pricking your fingertip to help
blood flow.
•Avoid squeezing the fingertip.
•Apply the blood sample to the
test strip immediately.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Lancets and Lancing Device
•Lancets are for one-time use
only. Use a new lancet each
time you monitor.
•Discard your used lancet
properly. Put it in an empty
puncture-resistant container,
such as a plastic milk carton or
detergent bottle.
•Never share your lancing
device or lancet with
another person.
Applying the Blood Drop to
the Test Strip
Touch the blood drop to
1the purple area on the top
of the test strip. The blood
is drawn into the test strip.
Note: If the monitor shuts off
before you apply blood to the
test strip, remove the test strip
from the monitor and try again.
Continue to touch the
2blood drop to the purple
area on the top of the test
strip until the monitor
begins the test. The monitor
begins the test when:
49
Download from Www.Somanuals.com. All Manuals Search And Download.
•You hear the beeper, if the
beeper is ON.
Status bar
•The display window shows the
status bar.
•Then the display window
shows the countdown.
Note: Do not remove the
test strip from the monitor
or disturb it during
the countdown.
Important: If the countdown
does not start:
What It Means:
You might not have applied
enough blood to the test strip.
What to Do:
•Apply a second drop of blood
to the test strip. Refer to your
test strip instructions for use
for the number of seconds
you have to apply a second
drop.
Countdown
•If the countdown still does
not start, or if the number of
seconds you have to apply a
second drop have passed,
discard the test strip, turn off
your monitor, and try again
with a new test strip
50
Download from Www.Somanuals.com. All Manuals Search And Download.
At the end of
3the countdown:
•If the beeper is ON, listen for
the beeper.
•The blood ß-Ketone result
shows on the display window
with the word KETONE.
•The result is stored in your
monitor’s memory as a blood
ß-Ketone result. You may
also write the result in
your logbook.
Shutting Off Your Monitor
Removing the test strip from
1the strip port turns off the
monitor. You can use the
opened foil packet to
remove and discard your
used test strip.
Discard the test
2strip properly.
Note: You may also turn the
monitor off by Pressing and
Holding the
button. If you
do not turn your monitor off or
pull the test strip out, the
monitor shuts off automatically
after 60 seconds.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding
Your Result
Blood ß-Ketone is expected to
be lower than 0.6 mmol/L.3
Blood ß-Ketone may be higher
when a person is ill, is fasting,
exercises vigorously, or if
blood glucose levels are
not controlled.2-4
When:
•Blood ß-Ketone result is
between 0.6 and 1.5 mmol/L
and blood glucose result is
300 mg/dL (16.7 mmol/L)
or higher:
What It Means:
A problem requiring medical
assistance may be occurring.
What to Do:
Contact your healthcare
professional. Follow his or
her instructions for sick
day management.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
When:
•Blood ß-Ketone result
remains high or becomes
higher than 1.5 mmol/L:
What It Means:
You may be at risk of
developing diabetic
ketoacidosis (DKA).3-7
What to Do:
Contact your healthcare
professional immediately.
"HI" Result
What It Means:
Your monitor has determined
that your blood ß-Ketone
result is higher than 6.0
mmol/L, or there may be a
problem with the test strip.
What to Do:
Monitor your blood ß-Ketone
again with a new test strip. If
HI shows on the display
window again, contact your
healthcare professional
immediately.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
"E-4" Result
What It Means:
There may be a problem with
the test strip.
What to Do:
Monitor your blood ß-Ketone
again with a new test strip. If
E-4 shows on the display
window again, contact your
healthcare professional
immediately.
Important: It is recommended
that you repeat the blood
ß-Ketone test with a new test
strip when:
•HI appears in the
display window.
•Your result is unusually high.
•You question your result.
•You obtain a 0.0 mmol/L
blood ß-Ketone result BUT
your blood glucose is higher
than 300 mg/dL (16.7 mmol/L).
Important: A result that is
incorrect may have a serious
medical outcome. Consult your
healthcare professional before
changing your diabetes
medication program.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6
Questions? Call
Customer Care:
1-800-527-3339
Doing A Control
Solution Test
Why Do A Control
Solution Test?
The control solution test tells
you that your monitor and test
strips are working correctly. A
control solution test is similar to
when you monitor your blood
glucose or blood ß-Ketone,
except you use a MediSense
Control Solution. You do not
use a drop of blood in a
control solution test.
When Is Doing A
Control Solution
Test Recommended?
•When you question
your results
•To make sure that your
monitor and test strips are
working properly
Important Information
about Control
Solution Testing
•For more detailed information
about control.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
solutions, read the control
solution instructions for use.
•MediSense Control
Solutions may be used for
glucose or ketone control
solution testing.
•Do not use the control
solution if the expiration date
has passed. Check the
expiration date printed on the
control solution bottle.
•When you open a control
solution bottle for the first
time, count forward 90 days
and write this date on the
control solution bottle using
a pen that won’t smear or
wipe off. Throw away any
remaining solution after
this date.
•The results obtained from
control testing do not reflect
your personal blood glucose
or blood ß-Ketone levels in
any way.
•Do not swallow the
control solution.
•Do not inject the control
solution or use the control
solution as eye drops.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
What You Will Need
•Precision Xtra monitor
calibrated to match the LOT
number (glucose) or
calibration CODE (ß-Ketone)
of the test strip you are using
•Blood glucose or blood
ß-Ketone test strip and its
instructions for use
•MediSense Control Solutions
and instructions for use
How to Do Control
Solution Testing
Getting Started
Wash your hands using
1warm soapy water and dry
them completely.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Remove the test strip from
2its foil packet.
Note: For pictures that
show how to open the
blood glucose test strip foil
packet, please see the
information card in the box
of blood glucose test strips.
Insert the three black lines
3at the end of the test strip
into the strip port.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Push the test strip in until
4it stops.
The monitor turns
on automatically.
These items show on the display
window, one after the other:
•Display Check – Remember to
make sure that all items in the
picture here show on the
display window. (See Chapter 1
for more information about the
Display Check.)
•Time, month, and day (if set)
If date and time are not set,
dashes will show instead
of numbers.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
•LOT number (glucose) or
calibration CODE (ß-Ketone)
for the box of test strips you
are using.
•Apply Blood message, which
tells you that the monitor is
ready for you to apply control
solution to the test strip.
Note: If you are a doing a
ß-Ketone control solution
test, KETONE will show on
the monitor’s display window
with the ß-Ketone Apply
Blood message.
To mark the test as a control
5test, Press and Release the
button once.
shows
on the display window.
Important: If you do not mark
the test as a control test, it will be
saved in your monitor’s memory
as one of your personal blood
glucose or blood ß-Ketone results.
This could affect your blood
glucose averages.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Applying Control Solution to
the Test Strip
Turn the control solution
1bottle upside down three
to four times to mix
the solution.
Remove the cap.
2
Apply a drop of control
3solution to the test strip in
the area shown here. The
control solution is drawn
into the test strip.
Glucose
ß-Ketone
Status
bar
Continue to touch the
4control solution to the test
strip until the monitor
begins the test.
The monitor begins the
test when:
•You hear the beeper, if the
beeper is ON.
•The display window shows
the status bar.
•Then the display window
shows the countdown.
Countdown
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: Do not remove the
test strip from the monitor
or disturb it during
the countdown.
Important: If the countdown
does not start:
What It Means:
You might not have applied
enough control solution to the
test strip.
What to Do:
•Apply a second drop of
control solution to the test
strip. Refer to your test strip
instructions for use for the
number of seconds you have
to apply a second drop.
Glucose
•If the countdown still does
not start, or if the number of
seconds you have to apply a
second drop have passed,
discard the test strip, turn off
your monitor, and try again
with a new test strip.
At the end of
5the countdown:
•If the beeper is ON, listen for
the beeper.
•The control result shows on
the display window.
ß-Ketone
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: If you are doing a
ß-Ketone control solution test,
KETONE will also show with
the result.
•The result is stored in your
monitor’s memory as a control
result. In your logbook, record
the result as a control result.
Shutting Off Your Monitor
Removing the test strip from
1the strip port turns off the
monitor. You can use the
opened foil packet to
remove and discard your
used test strip.
Discard the test
2strip properly.
Note: You may also turn the
monitor off by Pressing and
Holding the
button. If you
do not turn your monitor off or
pull the test strip out, the
monitor shuts off automatically
after 60 seconds.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding
Your Result
Compare the control result to
the "Expected Results for Use
with MediSense Control
Solutions" range printed on:
•The blood glucose test
strip instructions for use,
for glucose control
solution testing.
•The blood ß-Ketone test strip
instructions for use and foil
packet, for ß-Ketone control
solution testing.
If the control result falls
within the range:
What It Means:
Your monitor and test strips are
working correctly.
If the control result does
not fall within the range:
What It Means:
Your monitor and test strips
may not be working correctly.
What to Do:
Repeat the test with a new test
strip and ensure the control
solution testing instructions are
followed completely. If the result
is still not within the printed
range, contact Customer Care.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 7
Questions? Call
Customer Care:
1-800-527-3339
Reviewing & Using
Your Results
What Can Your Monitor
Show You?
Memory
Your Precision Xtra monitor
has a memory that stores up
to 450 events. This is a
combination of control results,
your personal blood glucose
and blood ß-Ketone results,
and other monitor information.
You can review up to 450 of
your most recent events on
your monitor’s display window.
Glucose Averages
You can view the average of all
your blood glucose results from
the last 7, 14, or 30 days. If you
marked your control solution
tests, the averages do not
include control solution results.
(For more information on
marking control solution tests,
see Chapter 6.)
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Important:
•To review blood glucose
averages, you must set
the date and time
before monitoring.
•If you do not mark control
solution tests, this may affect
your glucose averages.
•Blood glucose averages do
not include blood ß-Ketone
results, glucose control results,
ß-Ketone control results, or
results that do not show the
time, month, and day.
➡
•When there are no previous
results or blood glucose
averages to review, the display
window shows three dashes.
How to See Results
in Memory
Begin with your monitor
1turned off. Make sure
there is nothing in the
strip port.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Press and Release the
2button.
•The Display Check shows on
the display window.
•Then your most recent result
shows with its units on the
monitor’s display window,
along with the time, month,
and day that you got the
result. (To set the correct date
and time, follow the steps in
Chapter 2.)
A blood glucose result in
Memory will show with the
letters MEM.
Blood Glucose result
in Memory
A blood ß-Ketone result in
Memory will show with the
letters KET MEM.
Blood ß-Ketone result
in Memory
67
Download from Www.Somanuals.com. All Manuals Search And Download.
A control solution result in
Memory shows with a
control bottle, as long as
you marked the test as a
control solution test.
Glucose control
solution result
in Memory
ß-Ketone control
solution result
in Memory
To review previous results,
3Press and Release the
button once per result.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
When you reach the
4last result in Memory,
the display window
shows three dashes.
To return to a result you
5previously reviewed, Press
and Release the
once per result.
button
How to See Averages
Important:
•Results that show as LO
during blood glucose
monitoring are included as
20 mg/dL (1.1 mmol/L) in
blood glucose averages.
•Results that show as HI
during blood glucose
monitoring are included as
500 mg/dL (27.8 mmol/L) in
blood glucose averages.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
While in Memory, Press and
1Release the button at any
time to see the 7-Day
average of your blood
glucose results.
Note: n means how many tests
were performed within the 7-,
14-, or 30-Day average period.
Press and Release the
2button once to see the
14-Day average of your
blood glucose results.
Press and Release the
3button again to see the
30-Day average of your
blood glucose results. If
you Press and Release
the
button again, the
display window shows the
7-Day average.
Press and Release the
4button at any time to return
to Memory.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Press and Hold the
5button to turn off your
monitor. Otherwise, the
monitor turns off after
30 seconds.
Transferring Your Results
to a Computer
The results in your Precision
Xtra monitor's memory, along
with the time and date of the
reading, can be transferred to
a computer with the use of
the Precision Link® Direct
Software Version 2.5 and a
Precision Link communications
cable. For information on how
to purchase the software and
cable, contact Customer Care
at 1-800-527-3339. To install
the software, please follow
the instructions provided in
the Precision Link User's Guide.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 8
Questions? Call
Customer Care:
1-800-527-3339
Understanding &
Troubleshooting
Error Messages
There are times when error
messages may show on your
monitor’s display window.
In the next few pages, we
describe the error messages that
may show on your monitor’s
display window, what they
mean, and what you need to do.
Message
What It
Means
What You
Need to Do
•Move your
Temperature is
too hot or too
cold for the
system to work
properly.
monitor and test
strips to a location
where the
temperature is
appropriate and
monitor again
with a new test
strip. You may
have to wait
for your
monitor to
adjust to the new
temperature.
Refer to your test
strip instructions
for use for the
appropriate
operating range.
•If the error
message appears
again, contact
Customer Care.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
What It
Means
What You
Need to Do
Message
Monitor error.
•Turn the
monitor off,
then repeat
previous
monitoring
steps.
•If the error
message
appears again,
contact
Customer Care.
There may be
a problem with
the test strip.
•Review the
monitoring
instructions.
•Monitor again
with a new
test strip.
•If the error
message
appears again,
contact
Customer Care.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Message
What It
Means
What You
Need to Do
•Monitor again
with a new
test strip.
Blood glucose
result may be
too high to be
read by the
system.
•If the error
message
appears again,
contact your
healthcare
professional
immediately.
OR
There may be a
problem with
the blood
glucose or
blood ß-Ketone
test strip.
• Review the
monitoring
instructions.
Blood applied
to test strip
too soon.
• Monitor
again with
a new
test strip.
• If the error
message
appears again,
contact
Customer Care.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
What It
Means
What You
Need to Do
Message
•Repeat the
calibration
using the
Calibration/Test
strip error.
calibrator bar
that came with
the test strip
you are using.
•Check the date
setting on your
monitor.
•Check the
expiration date
on the test
strip foil
packet.
•If the error
message
appears again,
contact
Customer Care.
•Monitor again
using a test
strip designed
for use with
Test strip error.
Test strip is
damaged, used,
or the monitor
does not
Precision Xtra.
•If the error
message
appears again,
contact
recognize it.
Customer Care.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Message
What It
Means
What You
Need to Do
Monitor error.
•Remove test
strip, turn
monitor off,
and try to
monitor again.
•If the error
message
appears again,
contact
Customer Care.
•Remove test
strip, turn
Monitor error.
monitor off,
and try to
monitor again.
•If the error
message
appears
again,
contact
Customer
Care.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 9
Questions? Call
Customer Care:
1-800-527-3339
Your Monitor’s
Specifications
& Limitations
Size
Length
Width
Top
2.94" (7.47 cm)
2.10" (5.33 cm)
1.70" (4.32 cm)
0.64" (1.63 cm)
Bottom
Thickness
Weight
1.48 ounces (42 grams)
Power Source
One CR 2032 Lithium
(coin cell) battery
Battery Life
Memory
Approximately 1,000 tests
Up to 450 events including
control results, personal
blood glucose and blood
ß-Ketone results, and other
monitor information.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage
Temperature
Monitor:
Test Strips:
–13° to 131ºF (–25º to 55ºC)
See test strip instructions
for use.
Control Solution:
See control solution instructions
for use.
Blood Glucose
Assay Range
See blood glucose test strip
instructions for use.
Blood ß-Ketone
Assay Range
See blood ß-Ketone test strip
instructions for use.
Control Solution See blood glucose or blood
Range
ß-Ketone test strip instructions
for use.
Functions
- Blood glucose monitoring
- Blood ß-Ketone monitoring
- Memory
- Glucose averaging: 7-Day,
14-Day, and 30-Day Averages
- Control solution marking
and testing
- Backlight: If ON – Stays ON
during countdown; turns OFF
30 seconds after result is
displayed. If OFF – Stays OFF
during countdown; stays OFF
during data upload.
- Beeper: If ON – Beeps when
calibrator is fully inserted
and when countdown starts
and finishes.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Data port
Yes
Monitor Operating
Range
Temperature:
50º to 122ºF (10º to 50ºC)
Relative Humidity:
10% to 90%, non-condensing
System Operating
Range
Temperature:
The system operating range is
the operating range of the test
strip you are using. See
“Limitations of Procedure”
section in test strip instructions
for use.
Relative Humidity:
10% to 90%, non-condensing
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
about Using Blood
Samples from the
Forearm, Upper Arm, or
Base of the Thumb:
•Contact your healthcare
professional before you begin
using any one of these
alternative sites to test your
blood glucose.
•Sampling from any one of
these alternative sites may
cause minor bruising and may
leave marks that go away in a
short time.
•There may be times when
alternative site results are
different from fingertip results.
This happens when blood
glucose levels change rapidly
(for example, after you eat a
meal, after you take insulin, or
during or after exercise).
•Use alternative sites to
monitor your blood glucose
before, or more than two
hours after, you eat a meal,
take insulin, or exercise.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
•Do not use blood samples
from alternative sites when:
1.You think your blood
glucose is low or is
changing rapidly,
2.You have been
diagnosed with
hypoglycemic unawareness,
3.The results from
alternative sites do not
match the way you feel,
4.It is within two hours
of eating a meal, taking
insulin, or exercising, or
5.You monitor your blood
ß-Ketone.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 10
Questions? Call
Customer Care:
1-800-527-3339
Caring For
Your Monitor
Cleaning Your Monitor
Store your monitor in its
carrying case.
If the surface of your monitor
gets dirty, you may clean it. Use
a damp cloth and mild soap.
Healthcare professionals:
Acceptable cleaning solutions
include 10% Bleach, 70%
Alcohol, or 10% Ammonia.
Important:
Do not try to clean the
strip port.
Do not pour liquid into the
strip port or buttons.
Do not place your monitor in
water or any other bath.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing Your
Monitor’s Battery
When your monitor needs its
batteries replaced, the display
window shows one of
two things:
This means the battery is
low. You may still use your
monitor and the results will be
accurate. However, the
backlight is not useable. It is
recommended that you replace
the battery at this time.
➡
➡
This means the battery
must be replaced. The
monitor is not useable. The
monitor turns off automatically.
Important:
Do not remove the old battery
until you have a new battery to
install. It may be necessary to
reset the time and date once
you install a new battery.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Replace
Your Monitor’s Battery
Gently push the battery
cover in and up with
your thumb.
1
Lift the battery cover out of
2the monitor.
Pull on the plastic tab
3sticking out of the monitor
to remove the old battery.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Insert a new CR 2032
4Lithium (coin cell) battery
with the plus sign (+)
facing up.
Place the notches
5on the battery cover
into the appropriate
molded areas.
Gently push the battery
6cover in and down until
you hear a click.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Press and Hold the button
7to turn your monitor on. If
your monitor does not turn
on, review the battery
installation steps and reinstall
the battery.
Check the date and time on
8your monitor. You may need
to reset the date and time.
(See Chapter 2, Setting Up
Your System).
Be sure to discard the
9old battery in compliance
with your local
government’s regulations.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 11
Questions? Call
Customer Care:
1-800-527-3339
Support, Guarantee &
Limited Warranty
Support
Abbott Laboratories, Abbott
Diabetes Care, is committed to
providing you with support.
Call us with any questions you
may have about your Precision
Xtra monitor:
1-800-527-3339.
Outside the United States,
please contact your local
Abbott Laboratories, Abbott
Diabetes Care office
or distributor.
You can view interactive
product demonstrations online
at: AbbottDiabetesCare.com
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Guarantee & Limited Warranty
Precision Xtra Advanced Diabetes Management System:
Abbott Laboratories Inc., Abbott Diabetes Care (“Abbott”) offers
a Limited Warranty, as set forth below, to consumers who buy
a Precision Xtra Advanced Diabetes Management System
(“Monitor”) within the United States. Other purchasers, please
contact your local authorized Abbott distributor for information
about possible guarantee and/or warranty coverage for
your purchase.
90-day Guarantee: Abbott offers consumer purchasers a 90-day
money back guarantee. If you are not fully satisfied with your
Monitor, call Customer Care at 1-800-300-0978 (toll free) for a full
refund. Refund will be limited to amount paid by consumer net of
any rebates. You must have a copy of the dated itemized purchase
receipt and the original packaging to obtain this refund.
Limited Warranty: Under the standard warranty your new
Monitor is covered for a period of four years from the original date
of purchase, as long as it has not been modified, altered, or
misused. Lifetime Warranty is a benefit of enrollment in the
Precision Friends for Life Program and choice of replacement
monitor will be at the discretion of Abbott.
Under the warranty, Abbott will replace, free of charge, this
Monitor, if it is defective in material or workmanship. NO OTHER
WARRANTIES, EXPRESS OR IMPLIED, ARE MADE. ABBOTT WILL
NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING DIRECTLY OR INDIRECTLY FROM THE
FAILURE OF THE PRODUCT TO PERFORM IN ACCORDANCE
WITH SPECIFICATIONS.
Some states do not allow the exclusion or limitation of other
express or implied warranties or incidental or consequential
damages, so the above limitations or exclusions may not apply
to you.
For Warranty Service, contact Customer Care for assistance
and/or instructions for obtaining a replacement monitor at
1-800-527-3339. Abbott may require, as a condition to obtaining
warranty service, that you return the Monitor, postage prepaid, to
an address specified by Customer Care.
Your Rights Under State Law: This warranty gives you specific
legal rights, and you may also have other rights that vary from
state to state.
Free Lifetime Monitor Upgrades: Monitor upgrade requires
enrollment in the Precision Friends for Life Program and use
of your Monitor for a minimum of three years. Choice of
replacement monitor will be at the discretion of Abbott.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
References
1. Directive 1999/45/EC of the European Parliament
and of the Council of 31 May 1999 concerning the
approximation of the laws, regulations and
administrative provisions of the Member States
relating to the classification, packaging and labelling
of dangerous preparations.
2. Schade DS, Eaton RP. Metabolic and clinical
significance of ketosis. Special Topics in
Endocrinology and Metabolism 1982; 4:1–27.
3. Wiggam MI, O’Kane MJ, Harper R, Atkinson AB,
Hadden DR, Trimble ER, Bell PM. Treatment of
diabetic ketoacidosis using normalization of blood
3-hydroxybutyrate concentration as the endpoint of
emergency management. Diabetes Care 1997;
20:1347–52.
4. Harano Y, Kosugi K, Hyosu T, Suzuki M, Hidaka H,
Kashiwagi A, Uno S, Shigeta Y. Ketone bodies as
markers for Type 1 (insulin-dependent) diabetes and
their value in the monitoring of diabetes control.
Diabetologia 1984; 26:343–8.
5. Ubukata E. Diurnal variation of blood ketone
bodies in insulin-dependent diabetes mellitus and
non-insulin-dependent diabetes mellitus patients: The
relationship to serum C-peptide immunoreactivity
and free insulin. Ann Nutr Metab 1990; 34:333–42.
6. Luzi L, Barrett EJ, Groop LC, Ferrannini E, DeFronzo
RA. Metabolic effects of low-dose insulin therapy on
glucose metabolism in diabetic ketoacidosis. Diabetes
1988; 37:1470–77.
7. Hale PJ, Crase J, Nattrass M. Metabolic effects of
bicarbonate in the treatment of diabetic ketoacidosis.
Br Med J 1984; 289; 1035–8.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
|