9316CW Installation
and
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Introduction
1
Key Descriptions
The Set Options list
Basic Installation
Connecting the line cord
Connecting an optional fax
machine or modem
Connecting the power adaptor
Checking your telephone
Desk Mounting
Optional Wall Mounting
Adjusting the Display
The Set Options Key
memory keys
Saving from the display into
5
18
Making calls from memory keys
Basic Features
Making a call
Answering a call
6
6
memory keys
Making a Handsfree call
Putting a call on mute
Using the Redial List
Super Call Waiting Identification
SuperFlash
Identification on or off
Changing the display language
Turning the ringer on or off
Entering area codes
21
9
10
11
Knowing when you have
Controlling the ringer volume
Controlling the receiver volume
Controlling the speaker volume
11
24
Viewing multiple display and light
Index
26
27
27
Directory
Saving numbers and names to the
Directory
Saving an active call into Directory 12
Saving a memory key entry to the
Directory
12
12
13
14
14
14
27
Entering Names
Finding items in the Directory
Editing in the Directory
Deleting items from the Directory
Callers List
15
15
15
15
Using the Callers List
Setting up the Callers List
Finding an item in the Callers List
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for purchasing 9316CW telephone. We think you’ll find it’s full of exciting
features. With a personal Directory and a Callers list, your new telephone is designed to
take full advantage of the latest services offered by your local telephone company.
When you subscribe to services such as Calling Line Identification and Call Waiting Iden-
†
tification through your local telephone company, your 9316CW will show you all the
caller information you’ll need on its three-line back-lit display. For example, before you
even answer a call you’ll know who is calling, even if it’s a Call Waiting call. And Call
Waiting Identification information can appear on two telephone extensions at the same
time so that someone at either extension can initiate the switch to a Call Waiting call. Your
telephone will also tell you how many new callers you have.
You can set up a personal Directory in which you can enter up to 50 names and numbers,
and your Callers List will log up to 50 incoming calls. The Options List makes it easy for
you to personalize your telephone, and the back-lit three-line display provides walk-
through prompting that makes all of the many features and options even easier to custom-
ize. Please read on for more information on the many features of your 9316CW.
†
The names of these services may vary from area to area.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Key Descriptions
Moveable display
Light
Left/right arrows
Sliding panel
Down/up arrows
Number card and lens
Contrast
Directory
Save
Hold
Rls
Callers
Delete
Link
Redial
Dial
Handsfree
Mute
Handset
Volume bar
Dial pad
Set Options
8 memory keys
∆
¢
Cycles through eight settings to adjust the display contrast.
Allows you to store and access up to 50 numbers and names.
Stores numbers and names in the Directory and in memory keys.
ß
ª
Allows you to move up and down any list such as the Set Options, Direc-
tory, Callers List, or Redial List.
“
Allows you to backspace and erase when predialing and when adding or
changing numbers and names in the Directory, Callers List or in memory
keys.
‘
˙
Adds a space when entering names in the Directory or in memory keys.
Allows you to view status messages on the display.
Puts the call on hold, inserts a pause and shifts between upper and lower
case.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
®
Always hangs up a call. Also allows you to leave any list such as the Set
Options List, Callers List, Redial List or Directory.
≈
∑
Allows you to access a list of people who called.
Allows you to erase memory keys, delete single or all items in the Directory
and Callers List as well as the entire Redial List.
˚
Allows you to access network features such as Call Waiting. Link is also
referred to as Flash.
µ
∂
Allows you access to a list of the last five numbers you dialed.
Dials any displayed number. Activates Handsfree mode if you have not
lifted the handset.
©
Activates the Handsfree speaker and microphone so you can listen and talk
without lifting the handset. Also allows you to mute a handsfree call so that
a caller cannot hear you.
√
∫
†
Allows you to adjust the receiver, speaker, and ringer volume.
Memory keys store numbers, names, and features.
The unlabeled Set Options key is hidden under the sliding panel and allows
you to access ten options to customize your telephone.
The Set Options list
Set Options list
page
01. Change display language
02. Set the time and date
03. Select the ring tone
10
10
11
21
21
24
22
15
23
10
04. Add a Timer key
05. Select the dial pad mode
06. Clear message waiting
07. Enter area codes
08. Set up the Callers List
09. Add Security Number
10. Call Waiting Identification display on or off
Note: Please refer to each section for the default settings for the above options.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Basic Installation
This section explains how to install your 9316CW telephone.
Connecting the handset cord
Connecting the line cord
1
Attach one end of the handset cord to the
handset and the other end to the handset jack.
Attach one end of the line cord to jack number
1 and the other end of the line cord to the wall
jack.
Connecting an optional fax
machine or modem
Connecting the power adaptor
1
2
!
Attach the line cord to jack number 2 and the
other end to the modem or fax machine. This
line cord is not supplied with the telephone.
Attach the power adaptor to the base of the
telephone where the warning symbol is
marked. Connect the power adaptor into the
closest electrical outlet.
To avoid potential electrical shock hazard to personnel or damage to the tele-
phone, use only the manufacturer-supplied equipment and installation proce-
dures. Specifically, use only 2 or 4 conductor modular teledapt plug/cords with
this product, and an AC transformer that is CSA/UL or CSA-NRTL/C approved
Class 2 level C, rated as follows:
For North American Markets mains nominal AC voltage 110-117V, Input: 110/
117VAC, 50/60Hz, 10W and Output: 16VAC 250mA.
For International Markets mains nominal AC voltage 220-240V, Input: 220/
240VAC, 50/60Hz, 10W and Output: 16VAC 250mA.
Substitution of non-approved equipment will void the Aastra Telecom Inc., war-
ranty. For more information call 1-800-574-1611.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Checking your telephone
When you plug in your 9316CW, you may see a message asking you to make a language
selection. Follow the directions on the display to select a language.
Your telephone also runs a test to ensure that the line cords are connected properly. If the
test fails, the display prompts you to check the line cord. Make sure that all connections
are fastened securely.
Desk Mounting
Slide the stand back until it clicks
into the locked position.
Lower the stand into the slots on the base
of the telephone, as shown above.
†
Optional Wall Mounting
Slide the stand back until it clicks
into the locked position.
Lower the stand into the slots on the base
of the telephone, as shown above.
Adjusting the Display
The Set Options Key
Place your 9316CW on a table or hang it
on a wall, then adjust the display.
Move the sliding panel over to the
right to reveal the Set Options key.
†
We recommend that you use a wall mounting plate which is available through your telephone company. If you are going to wall
mount your 9316CW, use the 20 cm (8”) line cord supplied with your telephone.
Note: The Ringer Equivalence Number (REN) is 1.4B for the 9316CW telephone. Please
see the base of your telephone or the Regulations sheet for more regulatory and
safety information.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Basic Features
Making a call
You can use the 9316CW to simply make a regular call, or you can predial a telephone
number to ensure it is correct before it is dialed out. Follow the procedures below to make
a regular or predialed call.
To make a regular call:
1. Lift the handset or press ©.
2. Enter the number using the dial pad.
1. Enter the number using the dial pad.
2. Lift the handset or press either ©
or ∂.
Note: If you have turned on the live dial pad option, you will not have to lift the handset
or press any buttons after entering the number. Refer to Selecting the dial pad
mode on page 21.
Answering a call
To answer a call:
1. Lift the handset or press ©.
Calling Line Identification information is sent from the telephone company to your
9316CW telephone between the first and second ring. Therefore, if you want the telephone
number of the incoming call to appear on the display and in the Callers List, you must wait
until the information appears on the display before answering the telephone.
Putting a call on hold
When you put a call on hold it is important to hang up the handset.
To put a call on hold and take a call off hold:
1. Make or answer a call.
2. Press ˙. The display shows that the call is on hold.
3. Hang up the handset.
4. To retrieve the call, lift the handset or press either ˙ or ©.
If you don’t retrieve the call within 15 minutes, the call is automatically dropped.
Note: The 9316CW automatically releases the held call when a person on an extension
telephone picks up the call. If you don’t hang up the handset after you have put a
call on hold and that call is picked up by someone at another extension, the call is
taken off hold but remains connected to your telephone. If this happens, any back-
ground noise from your area will be heard by the caller and the person at the other
extension.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Making a Handsfree call
You don’t have to use the handset to use your telephone. Instead, you can use Handsfree
mode to place a call, or you can switch to Handsfree mode while a call is already in
progress.
To dial without picking up the handset:
1. Press ©.
To switch to a Handsfree call:
1. Lift the handset.
2. Enter the number using the dial pad.
2. Enter the number using the dial pad.
3. When the call is answered, press
©.
4. Hang up the handset.
Putting a call on mute
You can turn off the microphone so that the caller cannot hear you but you can still hear
the caller. Muting a call only works when you are in Handsfree mode.
To mute a call:
1. Press ©.
2. Without lifting the handset, make a call.
3. To turn the microphone off, press ©again.You can hear your caller but your
caller cannot hear you. The light beside © flashes.
4. To speak to your caller, press © again. Each time you press ©, you
switch between handsfree and mute.
5. When the call is over, press ®.
Using the Redial List
The Redial List stores the last five numbers you dialed. When you press µ, the last
number you called appears on the screen. You can scroll through the list to view the other
numbers. Note that if you press µ after either lifting the handset or pressing
©, your telephone automatically dials the last number in the Redial list.
To make a call from the Redial List:
1. Press µ. The display shows the last number you dialed.
2. Find the number you wish to call by pressing ª.
3. When the number is displayed, lift the handset or press either © or ∂.
There may be times when you want to delete the contents of the Redial List. For example,
if you have dialed a personal number such as a password or your calling card number, you
may not want it to appear in the list where anyone can see it.
To delete the Redial List:
1. Press µ.
2. Press ∑ twice. The entire Redial List is deleted.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
†
Call Waiting Identification
The 9316CW is capable of displaying Call Waiting Identification information of a second
incoming call while you have a call in progress. When you are on a call and you hear the
Call Waiting tone, the Call Waiting information is displayed as shown below.
Incoming caller's information
(Caller One) is displayed.
When you hear the Call Waiting tone,
Caller Two's information is displayed.
If you decide you want to speak to the new caller, simply press ˚. Your first call will
˚. When you press ˚ and see a caller’s Identification information but only
hear a dial tone, it means the caller has hung up. Your second call will be stored in the
Callers List even if it isn’t answered. For more information about stored calls, see Using
the Callers List on page 15.
Note: The Call Waiting Identification display option must be enabled in order to see the
Call Waiting Identification information on the display. Refer to Turning the display of
Call Waiting Identification on or off on page 10.
✝
Super Call Waiting Identification
The Super Call Waiting Identification feature allows the 9316CW and one other Super
Call Waiting Identification compatible telephones to display identification information
about the second call at the same time as shown below.
Incoming caller's information
Extension telephone picks up and also speaks with Caller One.
(Caller One) is displayed.
Extension
Call Waiting tone sounds and Caller Two's
information is displayed on both extensions.
Extension
†
You must subscribe to your telephone company for the Call Waiting with Calling Line Identification service.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
†
SuperFlash
The SuperFlash feature allows either of two telephone extensions to activate the link to a
Call Waiting call. When a person at either extension presses ˚, both extensions
switch to and speak with the Call Waiting caller as shown in the diagrams below.
Incoming caller's information
(Caller One) is displayed.
Extension telephone picks up
and also speaks with Caller One.
Extension
Either telephone can press ˚
to speakwith Caller Two.
Call Waiting tone sounds and Caller Two's
information is displayed on both extensions.
Extension
Both telephones speak to Caller Two
and see the displayed information.
Either telephone can press ˚ again
to switch back to Caller One.
Calls are not disconnected when you press ˚. If you wish to return to your first
caller press ˚ again. The 9316CW and one other SuperFlash compatible telephone
extension will switch between the two callers each time you press ˚. Once you have
switched to one caller by pressing ˚, you must wait three seconds before you can
switch back to the previous caller. When you press ˚and see a caller’s Identification
information but only hear a dial tone, it means that the caller has hung up.
To end a call, ensure you can see that call’s Identification information (you may have to
press ˚), then press ®.
Note: SuperFlash and Super Call Waiting Identification only work with SuperFlash and
Super Call Waiting Identification compatible telephones.
†
You must subscribe to your telephone company for the Call Waiting with Calling Line Identification service.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Turning the display of Call Waiting Identification on or off
You can choose whether or not Call Waiting Identification is displayed on your telephone.
To turn Call Waiting Identification on or off:
1. Press the Set Options key.
2. Use ª to scroll to number 10 or press ⁄‚ to go directly to the item.
3. Press • to turn the Call Waiting Identification display on or off.
4. Press ®.
Note: Turning the display of Call Waiting Identification on or off does not turn the feature
itself on or off. When the Call Waiting display is turned off, you will still hear the
Call Waiting tone when a Call Waiting call comes in, but the identification informa-
tion for the Call Waiting caller will not appear on your display screen. Contact your
local telephone company to subscribe or unsubscribe to Calling Line Identification
with Call Waiting Identification services.
Changing the display language
For changing business requirements, you may wish to change the language of your display
messages and prompts.
To change the display language:
1. Press the Set Options key.
2. Use ª to scroll to number 1 or press ‚⁄ to go directly to the item.
3. Press • to change the language.
4. Press – until the display language you want appears on the display.
5. Press £ to select the displayed language.
6. Press ®.
Setting the date and time
If you subscribe to the Calling Line Identification service from your telephone company,
the date and time are set automatically after you receive your first incoming call. If you do
not subscribe, you must set the date and time manually.
To set the date and time manually:
1. Press the Set Options key.
2. Use ª to scroll to number 2 or press ‚¤to go directly to the item.
3. Press • and follow the instructions on the display.
4. Press ®.
To resume the automatic date and time setting (if the date and time has been set manually),
disconnect the power supply, then re-connect it. After your first incoming call, the date and
time are automatically set.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Turning the ringer on or off
To turn the ringer on:
To turn the ringer off:
1. Press the left side of √. Con-
tinue pressing the left hand side until
the ringer is off.
1. Press the right side of √. Con-
tinue pressing the right hand side until
you reach the desired ring volume.
Ringer is OFF appears on the display.
Note: Do not lift the handset while you are turning the ringer on or off.
Setting the ring tone and ringer volume
You can choose one of four different ring tones and set the ringer volume.
To set the ring tone and volume:
1. Make sure that the ringer is turned on.
2. Press the Set Options key.
3. Use ª to scroll to number 3 or press ‚‹ to go directly to the item.
4. Press • and follow the instructions on the display.
When picking the ring tone, press √ to adjust the volume.
5. Press ß to end when you are satisfied with ring tone and ringer volume.
Note:You cannot turn the volume off when you are choosing the ring tone.
6. Press ®.
Controlling the ringer volume
When the telephone is ringing, you can press the left or right side of the volume bar
√ to adjust the ringer volume.
Controlling the receiver volume
When you are on the telephone, you can press the left or right side of the volume bar
√ to adjust the receiver volume. When you have completed your call, the receiver
volume returns to default.
Controlling the speaker volume
When you are listening through the speaker, you can press the left or right side of the vol-
ume bar √ to adjust the speaker volume.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Directory
The 9316CW stores the numbers and names of up to 50 of your business associates, cli-
ents, contacts, and friends in your Directory. You can dial these numbers by selecting
them.
Names are sorted alphabetically starting with their first character. (If you want your Direc-
tory sorted by the last name, enter the last name first.) If you do not enter a name, the item
is sorted by telephone number. The Directory items with only a telephone number are
numerically sorted at the beginning of the Directory.
Saving numbers and names to the Directory
To save a new number and name:
To save from the display:
1. Press ß.
1. Ensure a number is on the display.
Choose a number from the Directory,
Redial List, or Callers List, or turn off
the Live Dial Pad option and press a
memory key.
2. Press ¢.
2. Press ß.
3. Enter the number using the dial pad.
3. Press ¢. If the name is displayed
with the number, both are now saved in
the Directory.
4. Press ß. Only the number is
4. If no name is displayed, you are
prompted to enter one. If you do not
want a name, go to step 5. To enter a
name, use the dial pad. (See Entering
Names on page 13.)
stored at this point.
5. If you do not want a name, go to step
6. To enter a name, use the dial pad.
(See Entering Names on page 13.)
5. Press ß.
6. Press ß.
Saving an active call into the Directory
To save an active call:
1. Answer or make a call.
2. Press ß.
3. Press ¢. If the name was displayed with the number, both are now saved in the
Directory.
4. If no name is displayed, you are prompted to enter one. If you do not want to enter
one, go to step 5. To enter one, use the dial pad. (See Entering Names on page 13.)
5. Press ß.
6. Press ®.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Saving a memory key entry to the Directory
To save a memory key entry into the Directory:
1. Press the desired memory key. Ensure the live dial pad option is turned off.
2. Press ß.
3. Press ¢. If the name was displayed with the number, both are now saved in the
Directory.
4. If no name is saved, you are prompted to enter one. If you do not want to enter a
name, go to step 5. To enter a name, use the dial pad. (See Entering Names on
page 13.)
5. Press ß.
6. Press ®.
Entering Names
You can program names to correspond with numbers you have entered into the Directory
or a memory key. The following paragraphs explain how to enter letters using the dial pad.
Before you can use the dial pad to enter names, you must first save or edit a number in the
Directory or memory key.
To program a name, find the dial pad key that has the first character of the name. Keep
watching the display as you press the key until that character appears on the display. Press
a different dial pad key for the next character. If the next character is on the same key,
press ‘ to move to the next space. To display upper case letters, press ˙, then
press the appropriate dial pad key. To insert a space, press ‘. To backspace and erase
a mistake, press “.
For example, to enter the name Ruth press these keys:
‡‡‡, °°, ‘, °, ››.
If you wish to change a digit or letter after you have entered it, press “ to erase it.
⁄
›
‡
•
, - ’ & . ( ) 1
g G h H i I 4
p P q Q r R s S 7
*
¤
fi
°
‚
a A b B c C 2
j J k K l L 5
t T u U v V 8
0
‹
fl
·
£
d D e E f F 3
m M n N o O 6
w W x X y Y z Z 9
#
Making a call from the Directory
To make a call from the Directory:
1. Press ¢.
2. Press ª or use the dial pad to find the item you want to dial out.
3. Lift the handset or press either © or ∂.
4. To end the call, hang up the handset or press ®.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Finding items in the Directory
To find items in the Directory:
1. To see the Directory heading, press ¢.
2. To see the listings that start with a particular letter, press the appropriate dial pad key.
Then to see the other listings under that letter, press –. (For example: fitakes
you to the first "J" listing, then –takes you to the next "J" listing. fifitakes you
to the first "K" listing.) Use the letter chart shown previously.
OR, to move down and up the list, press – or ≠. If you want to scroll
steadily, press and hold – or ≠.
3. To leave the Directory at any time, press ¢ or ®.
Note: If you are on a call while you are viewing the Directory, pressing ®also drops
the call.
Editing in the Directory
To edit a number and/or name in the Directory:
1. Press ¢.
2. Press ª to find the item you want to edit.
3. To begin editing, press “.
4. If you do not want to change the number, go to step 5. To backspace and erase dig-
its, press “. To add digits, use the dial pad.
5. Press ß.
6. If you don’t want to change the name, go to step 7. To change or add to a name, use
“ and the dial pad. (See Entering Names on page 13.) If you edit the wrong
item or want to quit without saving changes, press ¢ or ®.
7. Press ß.
8. Press ®.
Deleting items from the Directory
To delete individual items:
1. Press ¢.
2. Press ª to find the item you want to delete.
3. Press ∑ twice.You are still in the Directory.
4. Press ® or ¢ to exit the Directory at any time.
To delete all items:
1. Press ¢.
2. Press ∑.
3. Press ∑ again to confirm deletion of the entire Directory.
4. Press ®.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Callers List†
Using the Callers List
The 9316CW stores up to 50 calls in the Callers List.Your telephone logs the number (and
name if available) of the caller, when they last called, and the number of times they tried to
reach you. See Callers List display messages on page 26 for a description of the display
messages and icons.
If the telephone number of the incoming call matches a number that you have programmed
with a name in a memory key or the Directory, the Callers List shows the name first and
then the number. You can choose to log either all incoming calls or only unanswered calls
in the Callers List.
Setting up the Callers List
You can program the 9316CW to record only unanswered calls or all incoming calls. The
default is to record all calls.
To change the Callers List:
1. Press the Set Options key.
2. Use ª to scroll to number 8 or press ‚° to go directly to the item.
3. Press • to change the Callers List.
Finding an item in the Callers List
To find items in the Callers List:
1. To see the Callers List heading, press ≈.
2. To see the first new caller in the list, press –.
To move down and up the list, press ª.
If you want to scroll steadily, press and hold ª.
3. To leave the Callers List at any time, press ≈ or ®.
Note: If you are on a call while viewing the Callers List, pressing ® drops the call.
Making a call from the Callers List
To dial a number in the Callers List:
1. Press ≈.
2. Use ª to find the number you want to dial.
3. Lift the handset or press either © or ∂.
4. To end the call, hang up the handset or press ®.
Note: When you finish the call, the display returns to the Callers List.
If you call a number from the Callers List and you do not get connected, you may have to
edit the number (for example, the number may be long distance and you may have to add
“1”). See Editing in the Callers List on page 16.
†
You must subscribe to your telephone company for the Calling Line Identification service.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Editing in the Callers List
To edit a number in the Callers List:
1. Press ≈.
2. Use ª to find the number you want to edit.
3. Press any key on the dial pad to begin editing.
4. To add digits, use the dial pad. To erase one digit to the right of the cursor, press
‘. To erase one digit to the left of the cursor, press “.
Caution: The Callers List does not save changes. If you plan to call the number
again, copy it to the Directory or a memory key.
5. To dial the edited number, lift the handset or press either © or ∂.
To have the Callers List show local numbers without the area code and internal numbers as
extensions, see Entering area codes on page 22.
1. Press ≈.
2. Use ª to find the item you want to edit.
3. Using the dial pad, press ⁄ and the area code if necessary.
4. To dial the edited number, lift the handset or press either © or ∂.
5. If you want to save the number to the directory, press ß. See Saving numbers
and names to the Directory on page 12.
Saving Callers List numbers to the Directory or a Memory key
1. Press ≈.
2. Use ª to find the number you want to copy.
3. Press ß.
4. Press ¢ or the memory key where you want to store the number.
5. If no name is displayed, you are prompted to enter one.To enter a name, use the dial
pad. (See Entering Names on page 13.) If you do not want to enter a name, go to
step 6.
6. Press ß.
7. To leave the Callers List at any time, press ≈ or ®.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Deleting from the Callers List
To delete a number in the Callers List:
To delete all numbers in the Callers List:
1. Press ≈.
1. Press ≈.
2. Use ª to find the item you want 2. Press ∑ twice.
to delete.
3. Press ∑ twice.
3. To leave the Callers List at any time,
press ≈ or ®.
You are still in the Callers List.
4. To leave the Callers List at any time,
press ≈ or ®.
Memory keys
Saving numbers and names in memory keys
You can save the numbers and names of your customers, business associates, or anyone
you call frequently in 9316CW’s eight memory keys. You can store more numbers and
names in the Directory. See the Directory on page 12 for more information.
To save a number and name:
1. Press ß.
2. Press the desired memory key.
3. Enter the number using the dial pad.You can enter a maximum of 24 digits.
Note: If you require a pause (for example, between a telephone number and an
access code), press ˙ where you want the pause. Each pause is 2 seconds.
4. Press ß.
5. To skip the name, go to step 6. To enter a name, use the dial pad.
(See Entering Names on page 13.)
6. Press ß.
7. Label the memory key. (See the diagram on page 18.)
Saving from the display into memory keys
To save from the display:
using the dial pad, or use the Redial List or Callers List.)
2. Press ß.
3. Press the desired memory key. If the name was displayed with the number, both are
now saved in the memory key.
4. If no name is displayed, you are prompted to enter one. If you do not want to enter a
name, go to step 5. To enter a name, use the dial pad. (See Entering Names on
page 13.)
5. Press ß.
6. Label the memory key. (See the diagram, Labeling the memory keys on page 18.)
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Labeling the memory keys
After programming the memory keys, label them with the supplied blank labels and
†
key caps.
Making calls from memory keys
To call from a memory key:
1. Lift the handset or press either © 1. Press the memory key with the number
or ∂. you want to dial out.
2. Press the memory key with the number 2. Lift the handset or press either
you want to dial out. ©or ∂.
To predial from a memory key:
Note: If the Live dial pad option is turned on, you do not have to lift the handset or press
any other button. Pressing the memory key will automatically dial the number and
put the telephone in Handsfree mode.
Editing memory keys
To edit a memory key:
1. To see its contents, press the memory key.
2. Press “.
3. If you do not want to change the number, go to step 4. To backspace and erase dig-
its, press “. To add digits, use the dial pad.
4. Press ß.
5. If you do not want to change the name, go to step 6. To add letters, use the dial pad.
(See Entering Names on page 13.) To erase letters, press “.
6. Press ß.
Note: The Live dial pad option must be turned off to edit memory keys. (See Selecting
the dial pad mode on page 21.)
†
Keep key caps and the sliding panel away from small children. These small parts may come off the telephone if
it is dropped.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Deleting memory keys
To delete a memory key:
1. To see its contents, press the memory key.
2. To erase, press ∑ twice.
Note: The Live dial pad option must be turned off to edit memory keys. (See Selecting
the dial pad mode on page 21.)
†
Saving features in memory keys
For easy access, you can save the feature codes of telephone company services in your
memory keys. This works well with network features such as Call Forwarding, Call
Screen and Call Return. Some features require an On and Off code in two separate keys,
while other features are stored on only one key. The following procedures show you how
to save both On and Off codes.
To save a feature On code:
1. Press ß.
To save a feature Off code:
1. Press ß.
2. Press the desired memory key.
2. Press the desired memory key.
codes for turning the feature On.†
code for turning the feature Off.†
Read the display to confirm the num-
ber.
Read the display to confirm the num-
ber.
4. Press ß again.
4. Press ß again.
5. Enter the feature name using the dial
pad. (See Entering Names on
page 13.)
5. Enter the feature name using the dial
pad. (See Entering Names on
page 13.)
6. Press ß again.
6. Press ß again.
7. Label the memory key. (See the dia-
gram on page 18.)
7. Label the memory key. (See the dia-
gram on page 18.)
†Note: Contact your telephone company for the appropriate feature codes.
Using feature keys
When a memory key is programmed with a feature code, you can use the memory key to
activate or deactivate the feature.
To turn a feature on or off:
1. Press the memory key where you stored the desired feature. The display shows the
feature name and code.
2. Lift the handset or press either © or ∂.
The feature code is dialed out, which turns the feature on or off.
Note: If the Live dial pad option is turned on, you do not have to lift the handset or press
any other button. Pressing the memory key will automatically dial the feature code
and put the telephone in Handsfree mode.
†You must subscribe to your telephone company for Custom Calling Features.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Saving a feature and light in memory keys
You can make the set indicator light come on when you turn a feature on and go off when
you turn that same feature off. You can only do this with one feature, and the feature must
have separate On and Off codes (such as Call Forwarding).
For example, you may want the light to remind you that you have turned Call Forwarding
on. To do this, use one key to turn the indicator light on when you activate the feature. Use
the second key to turn the indicator light off when you deactivate that same feature. The
following procedure shows you how to program a FeatureLight On and Off key.
To save a FeatureLight On key:
To save a FeatureLight Off key:
1. Press ß. Do NOT select a mem- 1. Press ß. Do NOT select a mem-
ory key yet.
ory key yet.
2. To program the light on, press ⁄.
3. Press the desired memory key.
4. Enter the telephone company feature
2. To program the light off, press ‚.
3. Press the desired memory key.
4. Enter the telephone company feature
code for turning the feature off.†
†
code for turning the feature on.
5. Press ß.
5. Press ß.
6. Read the display to confirm the num-
ber.
6. Read the display to confirm the num-
ber.
7. Label the memory key.
7. Label the memory key.
(See the diagram on page 18.)
(See the diagram on page 18.)
†
Note: Contact your telephone company for the appropriate feature codes.
Using FeatureLight keys
To turn a feature and light on or off:
1. Press the memory key where you stored the FeatureLight.
The display shows FeatureLight ON or FeatureLight OFF.
2. Lift the handset or press either © or ∂.
The feature and light turn on or off. (When the feature and light are on and you are
not using the telephone, the display shows Feature ON as a reminder.)
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Advanced Features
Adding a timer key
You can program any of the memory keys to be a Timer key.
To add a timer key:
1. Press the Set Options key.
2. Use ª to scroll to number 4, or press ‚› to go directly to the item.
3. Press • to add a Timer key.
4. Press a memory key.
5. Press ß.
6. Label the Timer key. (See the diagram on page 18.)
Using the call timer
The timer key is used to time the length of a call.
To show the timer on the display:
1. Make or answer a call. The timer starts running automatically.
2. Once on the call, press the Timer key. The display shows the running time of the call.
Press the Timer key to see the date and time.
3. When the call is over, hang up the handset or press ®. The timer stops counting.
Note: To show the elapsed time of the most recent call (or last call) when you are not on a
call, press the Timer key.
Deleting a timer key
To delete the timer key:
1. Press the timer key.
2. Press ∑ twice.
Selecting the dial pad mode
When you select the dial pad mode, you are turning the Live dial pad option on or off.
With Live dial pad on, the telephone automatically dials out and turns on Handsfree as
soon as you press a dial pad key or a memory key. When Live dial pad is off, the telephone
is in regular or predial mode. This means after you dial the telephone number you must lift
the handset or press either ∂ or © before the telephone number is dialed.
To select the dial pad mode:
1. Press the Set Options key.
2. Use ª to scroll to number 5 or press ‚fi to go directly to the item.
3. Press • to change the dial pad mode.
4. Press ®.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Entering area codes
When you enter an area code or prefix using this feature, your 9316CW telephone will
remove that code or prefix from incoming numbers that are logged in the Callers List. For
example, if you enter your area code into this option, all calls in your area code will appear
in the Callers List with the area code stripped off (the area code will appear in brackets
after the number). This may make it easier to identify local calls. You can enter three sepa-
rate area codes or prefixes, each up to seven digits long.
To enter area codes and prefixes:
1. Press the Set Options key.
2. Use ª to scroll to number 7 or press ‚‡ to go directly to the item.
3. Press •.
4. Enter the area code or prefix and press ß.
Repeat this step for each area code or prefix you want to enter.
5. Press ®.
To delete or change an area code or prefix:
1. Press the Set Options key.
2. Use ª to scroll to number 7 or press ‚‡ to go directly to the item.
3. Press •. The first area code is displayed. If this is the number you want to delete or
change, go to step 5.
4. Press ß until you see the number you want to change or delete.
5. Press “ to backspace and delete or change the area code or prefix.
6. Press ß.
7. Press ®.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
The Security Numbers feature
The 9316CW is equipped with a Security Numbers feature to keep selected numbers pri-
vate when you dial. When you have entered a secure number using this option, your tele-
phone does not display or store the digits that you dial after that secure number. Instead,
You can secure up to five 12-digit numbers.
For example, Joe enters 291-9000 as a secure number through the Set Options list. His
Voice Mail number is 1234 and his password is 5678. To access his messages, Joe dials
291-9000 1234 5678. Because the Voice Mail number and password follow the secure
number, the display shows 291-9000 **** ****, and Joe’s password is not displayed on
the screen or stored in the Redial List. For more information on the Redial List, refer to
Using the Redial List on page 7.
To enter a security number:
1. Press the Set options key.
2. Use ª to scroll to number 9 or press ‚· to go directly to the item.
3. Press •.
4. Using the dial pad, enter the security number.
5. Press ß to end.
Repeat steps 3 and 4 for each secure number you want to enter.
6. Press ®.
To delete or change a security number:
1. Press the Set options key.
2. Use ª to scroll to number 9 or press ‚· to go directly to the item.
3. Press •.
4. Press ß until you find the number you want to change or delete.
5. Press “ to backspace and simply delete the secure number, or delete the
secure number and use the dial pad to enter the changed number.
6. Press ß.
7. Press ®.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Display messages and lights
The 9316CW has a back-lit three-line display that uses icons and messages to give you
call information.
The Callers List screen
A sample Callers List screen is shown below.
May also read:
Private name
Unknown name
Call has been
returned
The number in the list
May also read:
Private number
Unknown number
01 L.E. Steele
The area code 403 has
been stripped off
The call was answered
555-1440 (403)
AUG 13 12:45PM
3X
The caller called
three times
New call
Long distance call
Time and date of call
Unanswered call
Answered call
Call Waiting Identification call
Knowing when you have a Voice Mail message
The 9316CW’s set indicator light lets you know that your Voice Mail system has a mes-
sage for you. The set indicator light flashes slowly and the display shows Message Wait-
ing after your Voice Mail has received a call. Contact your local telephone company to
find out how you can subscribe to Message Waiting (Voice Mail) services.
Clear Message Waiting
There may be times when Message Waiting appears on the display when there are no
more voice messages. You can turn the display message off using the Clear Message Wait-
ing feature.
To clear message waiting:
1. Press the Set Options key.
2. Use ª to scroll to number 6, or press ‚fl to go directly to the item.
3. Press • to clear message waiting.
4. Press ®.
Note: This only applies when you subscribe to Voice Mail services from your telephone
company.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
General display messages
Message
What it means
If there is no dial tone, make sure the line cord and handset
cord are attached securely.
Check line cord
The Directory remains empty until you add numbers and
names to it.
Directory empty
Use SAVE to add
The Directory has a 50 entry limit. If you want to add an item,
delete an item you no longer use.
Directory full
No changes made
An extension telephone is using the same line that you want
to use. Wait until the message disappears before making
your call.
Extension in use
The FeatureLight On key has been pressed and the code
dialed out.To turn off the feature and the light, press the Fea-
tureLight Off key and lift the handset or press either ©
or ∂.
Feature ON
The call is forwarded from another telephone.
<Forwarded call
Key is locked
The memory key is factory-programmed and cannot be
erased or reprogrammed. Program a different memory key.
The caller is calling from outside your local area. Long dis-
tance dialing is required to return the call.
Your Voice Mail service has received a call for you. To sub-
scribe to voice mail service contact your telephone company.
Message Waiting
The caller has requested that the telephone company not
deliver the number or name.
Private number or
Private name
This appears if you press µ before making any calls
on your telephone or if power has been interrupted.
Redial list
is empty
The ringer volume is turned off. To turn the ringer ON; with-
out lifting the handset, press the right side of the volume bar.
Ringer is OFF
The name or number is unavailable from the telephone com-
pany.
Unknown name or
Unknown number
When you are not on the telephone and not in the Callers
List, the display shows you how many callers have been
added to the list since you last checked it.
XX New Callers
The telephone number is longer than the display.The display
shows … and 14 or 15 digits of the number depending on
whether the phone is on or off hook.
>…xxxxxxxxxxxxxxx
…xxxxxxxxxxxxxxxx
Indicates an incoming call.
Indicates that the phone is off hook.
Indicates an incoming Call Waiting call.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Callers List display messages
Message
What it means
Your telephone does not record incoming calls until you sub-
scribe to Calling Line Identification service. If you do sub-
scribe, you have not received any calls in the list yet or you
have deleted all numbers in the Callers List.
Callers List
is empty
XX is the number of old calls automatically removed to make
room for incoming new calls in the Callers List.The limit is 50
calls.
Bumped calls=XX
<Forwarded
The call is forwarded from another location.
The caller has called from outside your local area. Long dis-
tance dialing is required to return the call.
The caller has requested that the telephone company not
deliver the number or name.
Private number or
Private name
The name or number is unavailable from the telephone
company.
Unknown name or
Unknown number
N means a new call.
N
MAR 04 3:30pm 2x
…
means the number is longer than the display.
…xxxxxxxxxxxxxxx
01√Unknown Name
√means you have returned the call from the Callers List.
Indicates an unanswered call in the Callers List
Indicates an answered call in the Callers List
Indicates a Call Waiting call in the Callers List
2x means this caller has called twice.
The display shows the date and time of the last call from that
caller.
R Smith
123-456-7890
MAR 04 3:30pm 2x
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Learning about the lights
The 9316CW’s set indicator light also alerts you when another extension is on the line, the
telephone rings, a call is on hold, a feature is on, or the ringer is off. There is a small red
light beside © to show you the status of handsfree and mute.
Set indicator light messages
Feature
Light
Call is on hold
Extension in use
Feature ON
Indicator light flashes quickly.
Set indicator light is on.
Set indicator light is on.
Set indicator light flashes slowly.
Set indicator light is off.
Set indicator light flashes very quickly.
†
Message Waiting
Ringer is OFF
Visual Ringing
†
You must subscribe to Voice Mail services from your telephone company for this feature to work.
Handsfree indicator light messages
Feature
Light
Call is on Handsfree
Microphone is muted
Handsfree/Mute indicator light is on.
Handsfree/Mute indicator light flashes quickly.
Viewing multiple display and light messages
When you are not using the telephone, several messages can be active at any time, such as
date and time, X New Callers, Feature ON, Message Waiting, Ringer is OFF and Check
line cord. When more than one of these messages is active, the display shows the most
recent message and an arrow beside it (e.g., 1 New Caller ‚). You can view the other
messages by pressing ‘. Each time you press ‘, the display shows the next
active message and its associated light.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Troubleshooting
The display is in an alternate language.
You can change the display language using the Set Options key. See Changing the
display language on page 10 for more information.
The cursor does not move when saving in the Directory.
The number or name is too long. Numbers can be no longer than 24 digits and names can
be no longer than 16 characters.
You cannot save a Directory number into a memory key.
You cannot save Directory items into memory keys. Once you are in the Directory,
ß can only add an item to the Directory.
Callers are not identified on the display.
Let the telephone ring at least twice before answering. If that does not work, you may not
have Calling Line Identification service. To subscribe, contact your local telephone
company.
The Callers List is empty.
Until you subscribe to Calling Line Identification service, your telephone does not record
incoming calls.
You cannot dial a number in the Callers List.
The caller may have an unknown number. If there is a number, you may have to edit it
before you can dial it.
You cannot hear a caller or be heard.
Make sure the handset cord is inserted securely into the jack and make sure the receiver
volume is high enough.
There is no information on the display and the ringer volume is low.
Make sure the power adaptor is connected to a working electrical outlet.
The power is out and the display is blank.
9316CW still operates as a regular telephone during a power failure.You can dial using the
dial pad and you can receive calls, but the other keys and the display do not operate until
the power is restored.
The display works but you can’t hear a dial tone.
Your telephone lines may be wired differently from the telephone jack. To have a service
person correct the wiring, contact your local telephone company.
The telephone wobbles.
Check that the handset cord is placed in the channel between the stand and the telephone.
See the illustration on page 5.
You cannot program a memory key.
Some of the memory keys may be factory-programmed. These keys are locked and cannot
be erased or reprogrammed.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Call Waiting Identification information is not being displayed.
Make sure that the Call Waiting Identification information option is enabled, and that you
†
have subscribed to a Call Waiting ID service.
You are unable to call back from the Callers List.
The Callers List will record the area code of any call, including local calls. You need to
take the area code out when dialing numbers from the Callers List.
How do you answer Call Waiting?
To answer a Call Waiting call, press ˚.You may have to subscribe to a Call Waiting
†
service to use this feature.
You can view regular Caller ID information, so why can’t you see who is calling on
Call Waiting?
Ensure that the Call Waiting Identification option (option 10) is on, and that you have
†
subscribed to a Call Waiting ID service from your telephone company. Also note that you
will not recieve Call Waiting ID when an extension is in use.
†
The actual name for this service may differ in your area. Please consult your local telephone company for
information.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Index
selecting 21
A
Area codes 22
C
Call Display
see also Link
Call Waiting Tone
Callers List 6, 15
deleting in 17
Display language
display messages 26
editing 16
finding items 15
making a call 15
Calling from
memory keys 18
Callers List 15
Directory 13
memory keys 18
26, 28
using 20
Calls 6
Call Waiting 8
holding 6
muting 7
redial list 7
Connecting
Handsfree 7
fax or modem 4
handset cord 4
line cord 4
See Troubleshooting
power adaptor 4
Contrast key 2
Cords
see Connecting
D
Date and time 10
Deleting
Language
see Display language 10
Left arrow key 2
Letters
area codes 22
Directory items 14
items in the callers list 17
memory key 19
Redial list 7
entering 13
Link
Calling Line Identification 8
key 3
Live Dial Pad mode 21
security numbers 23
timer key 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Long distance 16
M
Memory keys 17
deleting 19
editing 18
labeling 18
turning the ringer on/off 11
making calls 18
predialing from 18
saving features 19
saving from the display 17
trouble shooting 28
Mute 7
N
Names
entering 13
O
Options list 3
P
Pause 2
inserting in a number 17
R
Redial list 7
making a call 7
Release key 3
Right arrow key 2
Ring tone 11
setting 11
S
Save key 2
Saving
feature codes to memory keys 19
ory key 16
to memory keys 17
Scroll key 2
Security Numbers feature 23
Set Options list 3
T
Timer key 21
adding 21
deleting 21
using 21
Troubleshooting 28
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL INQ UIRIES
If you have read the guide and you still have questions, call 1-800-574-1611 in Canada and the USA. In other areas,
contact your telephone company.
© Aastra Telecom Inc., 2000
P0857798 Issue 04 CC1894 Rev 01
Download from Www.Somanuals.com. All Manuals Search And Download.
|