Aastra Telecom IP Phone 41 001507 00 User Manual

Aastra Model 6867i SIP IP Phone  
Installation Guide  
41-001507-00 REV00 – 04.2014  
Download from Www.Somanuals.com. All Manuals Search And Download.  
41-001507-00 REV00 – 04.2014  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Welcome  
Congratulations on your purchase of the Aastra Model 6867i IP Phone! The Aastra 6867i is a 9-line SIP phone  
designed for power users who demand a lot from both their phones and their networks. The Aastra 6867i pro-  
vides remarkable HD wideband audio and an enhanced speakerphone that utilizes dual microphones and  
advanced audio processing to achieve richer and clearer handsfree conversations. Supporting todays high  
speed networks through dual Gigabit Ethernet ports, the 6867i offers a large color LCD display, 6 programmable  
soft keys, 4 programmable context sensitive system keys and native DHSG/EHS headset support. With its fully  
customizable hard key layout, XML capabilities, and an environmentally efficient PoE class 2 rating, the 6867i is  
one of the most advanced SIP desktop phones available on the market today.  
Phone Features  
3.5” QVGA color TFT LCD with backlight  
Built-in-two-port, 10/100/1000 Gigabit Ethernet switch - lets you share a connection with your computer  
USB 2.0 port (100mA maximum)  
6 programmable and 4 context-sensitive softkeys  
Press-and-hold speeddial key configuration feature  
Supports up to 9 call lines with LEDs  
Wideband handset  
Wideband, full-duplex speakerphone for handsfree calls  
Headset mode support  
AC power adapter (sold separately)  
Enhanced busy lamp fields*  
Set paging*  
*Availability of feature dependant on your phone system or service provider.  
Requirements  
SIP-based IP PBX system or network installed and running with a SIP account created for the 6867i phone.  
Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext Transfer Protocol (HTTP) server,  
or Hyper Text Transfer Protocol over Secure Sockets Layer (SSL) (HTTPS).  
Ethernet/Fast Ethernet LAN (10/100 Mbps) (Gigabit Ethernet LAN [1000 Mbps] recommended).  
Category 5/5e straight-through cabling (Category 6 straight-through cabling required for optimum Gigabit Ethernet  
performance).  
Power source:  
For Ethernet networks that supply inline power to the phone (IEEE 802.3af) use an Ethernet cable to connect from  
the phone directly to the network for power (no 48V AC power adapter required if using Power-over-Ethernet  
[PoE]).  
For Ethernet networks that DO NOT supply power to the phone:  
Use only the GlobTek Inc. Limited Power Source [LPS] adapter model no. GT-41080-1848 (sold separately) to con-  
nect from the DC power port on the phone to a power source  
or  
Use a PoE power injector or a PoE switch.  
About This Guide  
This manual describes how to physically set up your new 6867i IP Phone. Not all features listed are available by default  
and some may depend on your phone system or service provider. Contact your system administrator if you have any  
questions on what features and services are available to you on your system.  
1
41-001507-00 REV00 – 04.2014  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Phone Parts  
When you unpack your phone, you should ensure that you have all of the following items. If any part is missing, contact  
the supplier of your phone.  
Telephone  
Handset  
Handset Cord  
Regulatory/  
Safety Insert  
Two-Angle Stand  
Additional Accessories (Not Included)  
Wall Mount Kit  
Power Adaptor  
Ethernet Cable(s)  
41-001507-00 REV00 – 04.2014  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
IP Phone Keys  
Key Panel  
  
  
6867i Handset  
Line/Call Appearance Keys  
Speaker/Headset Key  
Directory List Key  
  
  
High Quality Speakerphone  
Message Waiting Lamp  
Goodbye Key  
Hold Key  
Navigation/Select Keys  
Transfer Key  
Options Key  
Conference Key  
Mute Key  
Presence Key  
Volume Control  
Keypad  
Programmable Softkeys  
Context-Sensitive Softkeys  
TFT LCD Screen  
Callers List Key  
Redial Key  
3
41-001507-00 REV00 – 04.2014  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
IP Phone Keys  
Key Description  
The following table describes the keys on the 6867i IP Phone.  
Key  
Description  
Goodbye Key - Ends an active call. The Goodbye key also exits an open list, such as the Options List, without saving  
changes.  
Hold Key - Places an active call on hold. To retrieve a held call, press the call appearance button beside the light that is  
flashing.  
Options Key - Accesses services and options to customize your phone. Your System Administrator may have already cus-  
tomized some of your settings. Check with your System Administrator before changing the administrator-only options.  
Mute Key - Mutes the microphone so that your caller cannot hear you (the light indicator flashes when the microphone  
is on mute).  
Volume Controls - Adjusts the volume for the handset, ringer, and handsfree speaker.  
Callers List Key - Accesses a list of the last 200 calls received.  
Redial Key - Accesses a list of the last 100 previously dialed numbers. Pressing the Redial key twice redials the last dialed  
number.  
Line/Call Appearance Keys - Connects you to a line or call. The Aastra 6867i IP Phone supports two line keys, each with  
LED indicator lights.  
Speaker/Headset Key - Transfers the active call to the speaker or headset, allowing handsfree use of the phone.  
Directory Key - Accesses a directory of names and phone numbers (stored in alphabetical order).  
Navigation/Select Keys - Multi-directional navigation keys allow you to navigate through the phone’s user interface.  
Pressing the center Select key selects/sets options and performs various actions (such as dialing out when in the Direc-  
tory, Callers, and Redial Lists).  
Transfer Key - Transfers the active call to another number.  
41-001507-00 REV00 – 04.2014  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
IP Phone Keys  
Key  
Description  
Conference Key - Begins a conference call with the active call.  
Presence Key - Accesses the partial and full contact presence information screens, which provide more detailed infor-  
mation about the selected contact.  
Left Softkeys - 6 programable keys that allow you to easily perform up to 20 specific functions and access enhanced  
services provided by third parties (e.g. XML applications).  
Bottom Softkeys - 4 programmable keys that support up to 18 functions. These keys also act as state-based keys allow-  
ing you to easily perform context-senstive functions during specific states (i.e. when the phone is an idle, connected,  
incoming, outgoing, or busy state).  
5
41-001507-00 REV00 – 04.2014  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and Setup  
The 6867i IP Phone can be set up to share a network connection with another network device. Power can be provided by  
the power adapter (sold separately), by an 802.3af compliant network power source, or with a PoE inline power injector.  
Notes:  
This product is designed for indoor use only and for ambient temperatures at or below 40° C (104° F).  
The phone must be connected only to indoor routed PoE or Ethernet wiring.  
Direct or Shared Network Connection  
The phone can be set up as a direct network connection to the Ethernet wall jack or as a shared network connection as a  
pass-through if connecting the phone to a computer or another network device.  
Direct Network Connection  
Located on the back of the phone are two fully switched 10/100/1000 Mbps Ethernet cable ports. The port marked with  
is used to connect the phone to the network, as well as provide power to your phone (if required). See “Connecting to  
the Network and to Power” on page 7 for more information.  
To Other  
Power Adapter  
Network Device  
Connection  
To Network  
Ethernet Cables  
Network Jack  
(if inline power provided,  
do not install the power adapter)  
Power Adapter  
Other Network Devices  
Shared Network Connection  
To connect a network device (such as a computer) to the phone, connect an Ethernet cable into the network port on the  
back of the phone marked with  
. Plug the other end of the Ethernet cable into the network jack on the network device  
for which you are sharing the network connection.  
Notes:  
The PC jack on the 6867i IP Phone does not supply inline power onto other network devices.  
All Ethernet cables used must be minimum Category 5/5e straight-through cables.  
41-001507-00 REV00 – 04.2014  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Installation and Setup  
Connecting to the Network and to Power  
Power Adapter  
Use the power adapter (sold separately) with your phone and plug your phone into a power source.  
Alert!  
For power, use only the GlobTek Inc. LPS adapter model no. GT-41080-1848 (sold separately) to connect from the DC  
power port on the phone to a power source.  
Inline Power  
If your network provides 802.3af compliant inline power, the phone is powered through the network.  
1. On the back of your phone, connect an Ethernet cable into the network port marked with  
2. Plug the other end of the Ethernet cable directly into the network jack on the wall.  
.
To Network  
Ethernet Cable  
Network Jack  
(if inline power provided)  
7
41-001507-00 REV00 – 04.2014  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation and Setup  
Connecting a Handset or Headset  
Handset  
Turn the phone over and locate the handset jack marked j . Insert one end of handset cord into the jack until it clicks  
into place. Then route the handset cord through the groove as shown in the illustration below. Attach the handset to the  
other end of the handset cord.  
To Handset  
Headset (Optional)  
Turn the phone over and locate the headset jack marked f . If you have a headset with an RJ9/RJ22 4-pin connector,  
insert the headset cord into the jack until it clicks into place. Then route the headset cord through the groove as shown in  
the above illustration.  
If you have a DHSG/EHS headset with an RJ45 6-pin or 8-pin connector, remove the plastic headset jack adapter and then  
insert the cord into the jack until it clicks into place.  
Pull to remove headset jack adaptor  
Alert!  
The headset port is for headset use only. Plugging any other devices into this port may cause damage to the phone and  
will void your warranty.  
41-001507-00 REV00 – 04.2014  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation and Setup  
Installation  
Desk Installation  
For desk installation of the 6867i IP Phone a reversible stand is included that attaches to the back of the phone above the  
various ports. Two viewing angles (35° low angle and 55° high angle) are available allowing users to personalize their  
phone viewing preference.  
1. Locate the stand insertion area on the back of the phone (above the various ports).  
2. Carefully insert the stand into the insertion area and slide the stand towards the right until it snaps in place.  
Note:  
The orientation of the stand determines the viewing angle. If the bottom of the stand is installed facing the top of the  
phone the viewing angle will be 35°. If the bottom of the stand is installed facing the bottom of the phone the view-  
ing angle will be 55°.  
35°  
OR  
55°  
9
41-001507-00 REV00 – 04.2014  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation and Setup  
Wall Installation  
The 6867i IP Phone can be mounted to a wall using the Aastra 6800i Series Wall Mount Kit (optional accessory). The 6800i  
Series Wall Mount Kit is designed to be used with all 6800i Series IP Phones allowing you to easily and securely mount your  
phone in one of two ways:  
Directly to the wall  
On top of an existing telco wall plate  
Note:  
Refer to the Aastra 6800i Series Wall Mount Kit Installation Guide for additional product and installation details.  
Direct Wall Mount Installation  
To mount your 6867i IP Phone directly to the wall:  
1. Locate the wall mount insertion area on the back of the phone (above the various ports).  
2. Carefully insert the Wall Mount Connector into the insertion area of your phone (ensuring the Vertical Screw Lock  
Hole is facing up) and slide the Wall Mount Connector towards the right until it snaps in place.  
3. Turn over your phone and locate the handset hook found in the handset cradle.  
41-001507-00 REV00 – 04.2014  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and Setup  
4. Using your index finger and thumb, rotate the handset hook 180° as illustrated in the figure below.  
The handset hook is now in the correct position ensuring that your phone’s handset securely stays on hook when  
the phone is mounted to the wall.  
5. Using the provided screws, attach the Wall Mount Base to the wall ensuring the Vertical Screw Lock Hole is facing up.  
Note:  
Depending on the wall type, you may need to use wall anchors. Two wall anchors are included with your 6867i IP  
Phone.  
6. On the back of your phone, connect the provided Ethernet cable into the network port marked with  
. Plug the  
other end of the Ethernet cable directly into the network jack on the wall.  
11  
41-001507-00 REV00 – 04.2014  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and Setup  
7. Gently slide the Wall Mount Connector attached to your phone into the Wall Mount Base as illustrated in the figure  
below.  
Wall Mount Connector  
Attached to Wall Mount Base  
Note:  
For clarity, the phone attached to the Wall Mount Connector has been omitted in the figure above.  
8. Insert the locking screws into the Vertical and Horizontal Screw Lock Holes to secure the Wall Mount Connector to  
the Wall Mount Base.  
Note:  
For clarity, the phone attached to the Wall Mount Connector has been omitted in the figure above.  
9. Place the handset into your phone’s handset cradle.  
41-001507-00 REV00 – 04.2014  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and Setup  
Telco Wall Plate Installation  
To mount your 6867i IP Phone on top of an existing telco wall plate:  
1. Locate the wall mount insertion area on the back of the phone (above the various ports).  
2. Carefully insert the Wall Mount Connector into the insertion area of your phone (ensuring the Vertical Screw Lock  
Hole is facing up) and slide the Wall Mount Connector towards the right until it snaps in place.  
3. Turn over your phone and locate the handset hook found in the handset cradle.  
4. Using your index finger and thumb, rotate the handset hook 180° as illustrated in the figure below.  
The handset hook is now in the correct position ensuring that your phone’s handset securely stays on hook when  
the phone is mounted to the wall.  
13  
41-001507-00 REV00 – 04.2014  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and Setup  
5. Loosen the screws from the existing telco wall plate enough so that the Wall Mount Base is able to slide in place.  
or  
Remove the screws from the existing telco wall plate entirely and replace with a set of the provided screws. Ensure  
that the screws are loose enough so that the Wall Mount Base is able to slide in place.  
Note:  
Depending on the wall type, you may need to use wall anchors. Two wall anchors are included with your 6867i IP  
Phone.  
v
6. Align the Wall Mount Base above the screw heads (ensuring the Vertical Screw Lock Hole is facing up) on the telco  
wall plate and pull down to lock the Wall Mount Base in place.  
Telco  
Wall  
Plate  
Wall Mount Base Secured  
Align and Pull Down  
to Telco Wall Plate  
7. On the back of your phone, connect the provided Ethernet cable into the network port marked with  
. Plug the  
other end of the Ethernet cable directly into the network jack on the wall.  
41-001507-00 REV00 – 04.2014  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and Setup  
8. Gently slide the Wall Mount Connector attached to your phone into the Wall Mount Base as illustrated in the figure  
below.  
Wall Mount Connector  
Attached to Wall Mount Base  
Note:  
For clarity, the phone attached to the Wall Mount Connector has been omitted in the figure above.  
9. Insert the locking screws into the Vertical and Horizontal Screw Lock Holes to secure the Wall Mount Connector to  
the Wall Mount Base.  
Note:  
For clarity, the phone attached to the Wall Mount Connector has been omitted in the figure above.  
10. Place the handset into your phone’s handset cradle.  
15  
41-001507-00 REV00 – 04.2014  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and Setup  
Accessing Your Options via the Phone UI  
IP Phone UI  
1. Press the Options key on the phone to enter the options list.  
2. To go to an option, use the LEFT and RIGHT navigation keys to navigate through the main menus, and UP and DOWN  
navigation keys to navigate through the submenus.  
3. Press the Select softkey or Select navigation key to enter the option’s respective menu screen.  
4. Use the navigation keys to change a selected option (or keypad keys to enter information) and the press the Save  
softkey or Select navigation key to save your changes.  
5. Press the Cancel softkey or the Goodbye key at any time to exit without saving changes.  
Accessing Your Options via the Aastra Web UI  
You can use the following procedure to access the phone options using the Aastra Web UI.  
Aastra Web UI  
1. Open your web browser, enter the phone’s IP address or host name into the address field and press <Enter>.  
The following logon screen displays.  
41-001507-00 REV00 – 04.2014  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Installation and Setup  
2. At the prompt, enter your username and password and click OK.  
Note:  
For a user, the default user name is “user” and the password field is left blank.  
The Network Status window displays for the IP Phone you are accessing.  
3. You can logout of the Aastra Web UI at any time by clicking Log Off.  
The side menu options that display in the Network Status window are dependant on whether you log in as an Adminis-  
trator or User. A longer list of options display in the side menu for an Administrator.  
17  
41-001507-00 REV00 – 04.2014  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting Solutions  
Why is the light not coming on with a new voice mail message?  
Your phone system or service provider must provide “visual” message waiting service for this function to work. Check  
with your system administrator for more information.  
Why is my handset not working?  
Check to ensure that the handset cord is fully connected to both the phone and handset. See the section “Connecting a  
Handset or Headset” on page 8 for information.  
Why is my display blank?  
Ensure that power is being provided to your phone. If your network does not provide inline power over Ethernet, you can  
obtain a PoE inline power injector to provide power over Ethernet locally to your phone. See the section “Connecting  
Why does the telephone wobble?  
Make sure the cords are routed properly through the back of the phone, as indicated in the section, “Connecting a Hand-  
set or Headset” on page 8. Check that the stand has been properly inserted.  
What is a softkey?  
The 6867i has a total of 10 softkeys (6 programmable softkeys, located at the left of the front panel and 4 context-sensitive,  
state-based softkeys, located at the bottom of the front panel). You can program all 10 softkeys to perform specific func-  
tions and access enhanced services provided by third parties (for example, XML applications) on the phone.  
41-001507-00 REV00 – 04.2014  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Limited Warranty  
(Not applicable in Australia – see below for Limited Warranty in Australia)  
Aastra warrants this product against defects and malfunctions in accordance with Aastra's authorized, written functional  
specification relating to such products during a one (1) year period from the date of original purchase (“Warranty  
Period”). If there is a defect or malfunction, Aastra shall, at its option, and as the exclusive remedy, either repair or replace  
the product at no charge, if returned within the Warranty Period. If replacement parts are used in making repairs, these  
parts may be refurbished, or may contain refurbished materials. If it is necessary to replace the product, it may be  
replaced with a refurbished product of the same design and color. If it should become necessary to repair or replace a  
defective or malfunctioning product under this warranty, the provisions of this warranty shall apply to the repaired or  
replaced product until the expiration of ninety (90) days from the date of pick up, or the date of shipment to you, of the  
repaired or replacement product, or until the end of the original Warranty Period, whichever is later. Proof of the original  
purchase date is to be provided with all products returned for warranty repairs.  
Exclusions  
Aastra does not warrant its products to be compatible with the equipment of any particular telephone company. This  
warranty does not extend to damage to products resulting from improper installation or operation, alteration, accident,  
neglect, abuse, misuse, fire or natural causes such as storms or floods, after the product is in your possession. Aastra will  
not accept liability for any damages and/or long distance charges, which result from unauthorized and/or unlawful use.  
Aastra shall not be liable for any incidental or consequential damages, including, but not limited to, loss, damage or  
expense directly or indirectly arising from the customer’s use of or inability to use this product, either separately or in  
combination with other equipment. This paragraph, however, shall not apply to consequential damages for injury to the  
person in the case of products used or bought for use primarily for personal, family or household purposes.  
This warranty sets forth the entire liability and obligations of Aastra with respect to breach of warranty, and the warran-  
ties set forth or limited herein are the sole warranties and are in lieu of all other warranties, expressed or implied, includ-  
ing warranties or fitness for particular purpose and merchantability.  
Warranty Repair Services  
Should the product fail during the Warranty Period;  
In North America, please call 1-800-574-1611 for further information.  
Outside North America, contact your sales representative for return instructions.  
You will be responsible for shipping charges, if any. When you return this product for warranty service, you must present  
proof of purchase.  
After Warranty Service  
Aastra offers ongoing repair and support for this product. This service provides repair or replacement of your Aastra  
product, at Aastra's option, for a fixed charge. You are responsible for all shipping charges. For further information and  
shipping instructions:  
In North America, contact our service information number: 1-800-574-1611.  
Outside North America, contact your sales representative.  
Note:  
Repairs to this product may be made only by the manufacturer and its authorized agents, or by others who are legally  
authorized. This restriction applies during and after the Warranty Period. Unauthorized repair will void the warranty.  
19  
41-001507-00 REV00 – 04.2014  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Limited Warranty (Australia Only)  
The benefits under the Aastra Limited Warranty below are in addition to other rights and remedies to which you may be  
entitled under a law in relation to the products.  
In addition to all rights and remedies to which you may be entitled under the Competition and Consumer Act 2010 (Com-  
monwealth) and any other relevant legislation, Aastra warrants this product against defects and malfunctions in accord-  
ance with Aastra's authorized, written functional specification relating to such products during a one (1) year period from  
the date of original purchase (“Warranty Period”). If there is a defect or malfunction, Aastra shall, at its option, and as the  
exclusive remedy under this limited warranty, either repair or replace the product at no charge, if returned within the War-  
ranty Period.  
Repair Notice  
To the extent that the product contains user-generated data, you should be aware that repair of the goods may result in  
loss of the data. Goods presented for repair may be replaced by refurbished goods of the same type rather than being  
repaired. Refurbished parts may be used to repair the goods. If it is necessary to replace the product under this limited  
warranty, it may be replaced with a refurbished product of the same design and color.  
If it should become necessary to repair or replace a defective or malfunctioning product under this warranty, the provi-  
sions of this warranty shall apply to the repaired or replaced product until the expiration of ninety (90) days from the date  
of pick up, or the date of shipment to you, of the repaired or replacement product, or until the end of the original Warranty  
Period, whichever is later. Proof of the original purchase date is to be provided with all products returned for warranty  
repairs.  
Exclusions  
Aastra does not warrant its products to be compatible with the equipment of any particular telephone company. This war-  
ranty does not extend to damage to products resulting from improper installation or operation, alteration, accident,  
neglect, abuse, misuse, fire or natural causes such as storms or floods, after the product is in your possession. Aastra will  
not accept liability for any damages and/or long distance charges, which result from unauthorized and/or unlawful use.  
To the extent permitted by law, Aastra shall not be liable for any incidental damages, including, but not limited to, loss,  
damage or expense directly or indirectly arising from your use of or inability to use this product, either separately or in  
combination with other equipment. This paragraph, however, is not intended to have the effect of excluding, restricting or  
modifying the application of all or any of the provisions of Part 5-4 of Schedule 2 to the Competition and Consumer Act  
2010 (the ACL), the exercise of a right conferred by such a provision or any liability of Aastra in relation to a failure to com-  
ply with a guarantee that applies under Division 1 of Part 3-2 of the ACL to a supply of goods or services.  
This express warranty sets forth the entire liability and obligations of Aastra with respect to breach of this express war-  
ranty and is in lieu of all other express or implied warranties other than those conferred by a law whose application cannot  
be excluded, restricted or modified. Our goods come with guarantees that cannot be excluded under the Australian Con-  
sumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably  
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of accepta-  
ble quality and the failure does not amount to a major failure.  
41-001507-00 REV00 – 04.2014  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Limited Warranty (Australia Only)  
Warranty Repair Services  
Procedure: Should the product fail during the Warranty Period and you wish to make a claim under this express  
warranty, please contact the Aastra authorized reseller who sold you this product (details as per the invoice) and  
present proof of purchase. You will be responsible for shipping charges, if any.  
Manufacturer: Aastra Telecom Australia Pty Ltd  
745 Springvale Road  
Mulgrave VIC 3170  
ABN 16 140 787 195  
Phone: +61 3 8562 2700  
Limitation of Liability for Products not of a kind ordinarily acquired for personal, domestic or household use or  
consumption (e.g. goods/services ordinarily supplied for business-use)  
1.1 To the extent permitted by law and subject to clause 1.2 below, the liability of Aastra to you for any non-compliance  
with a statutory guarantee or loss or damage arising out of or in connection with the supply of goods or services  
(whether for tort (including negligence), statute, custom, law or on any other basis) is limited to:  
a) in the case of services:  
i) the resupply of the services; or  
ii) the payment of the cost of resupply; and  
b) in the case of goods:  
i) the replacement of the goods or the supply of equivalent goods; or  
ii) the repair of the goods; or  
iii) the payment of the cost of replacing the goods or of acquiring equivalent goods; or  
iv) the payment of the cost of having the goods repaired.  
1.2 Clause 1.1 is not intended to have the effect of excluding, restricting or modifying:  
a) the application of all or any of the provisions of Part 5-4 of Schedule 2 to the Competition and Consumer Act 2010  
(the ACL); or  
b) the exercise of a right conferred by such a provision; or  
c) any liability of Aastra in relation to a failure to comply with a guarantee that applies under Division 1 of Part 3-2  
of the ACL to a supply of goods or services.  
After Warranty Service  
Aastra offers ongoing repair and support for this product. If you are not otherwise entitled to a remedy for a failure to  
comply with a guarantee that cannot be excluded under the Australian Consumer Law, this service provides repair or  
replacement of your Aastra product, at Aastra's option, for a fixed charge. You are responsible for all shipping charges.  
For further information and shipping instructions contact:  
Aastra Telecom Australia Pty Ltd  
745 Springvale Road  
Mulgrave VIC 3170  
ABN 16 140 787 195  
Phone: +61 3 8562 2700  
Note:  
Repairs to this product may be made only by the manufacturer and its authorized agents, or by others who are legally  
authorized. Unauthorized repair will void this express warranty.  
21  
41-001507-00 REV00 – 04.2014  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Disclaimer  
Aastra will not accept liability for any damages and/or long  
distance charges, which result from unauthorized and/or  
unlawful use. While every effort has been made to ensure  
accuracy, Aastra will not be liable for technical or editorial  
errors or omissions contained within this documentation. The  
information contained in this documentation is subject to  
change without notice.  
Copyright © 2014 Mitel Networks Corporation,  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Addonics Technologies Computer Hardware RTM2233EU3 User Manual
Adesso Scanner EZSCAN 2000 User Manual
Agilent Technologies Satellite Radio E4406A User Manual
ALFA Network Router AWAP08O 11gHP User Manual
Alpine Car Satellite Radio System 700XMALPIN User Manual
Alps Electric Switch SSCM Series User Manual
Amana Clothes Dryer NED7200TW10 User Manual
Apple Network Cables Composite User Manual
Atlona Stereo Amplifier AT HD V116 User Manual
Aztech Systems Modem 206U User Manual