Installation Guide
Solecis AVB-DA-RGBHV-0103
AVB-DA-RGBHV-0103 Specifications (Cont.)
Overview
The Solecis AVB-DA-RGBHV-0103 1x3 RGBHV BNC Distribution Amplifier
(FG1340-3403-01) is a high quality wide bandwidth distribution amplifier. With a
video bandwidth in excess of 350MHz (-3dB) the AVB-DA-RGBHV-0103 is
suitable for all RGBHV, RGBS, RGsB and YUV type signals and can be used as
a composite video distribution amplifier.
Certifications:
• CE
• UL
• FCC class B, part 15
• RoHS/WEEE compliant
Safety Instructions
Please read these instructions before using your AMX Solecis device. Failure to
comply with these instructions could result in fire, electrical shock, personal injury,
death, or damage to the equipment.
The terminated inputs and 75 ohm driven outputs make the
AVB-DA-RGBHV-0103 ideal for connection to long cable runs.
The AVB-DA-RGBHV-0103 is housed in a metal enclosure and is powered by
the supplied external 9VDC power adaptor.
Liquid Spills
(front)
Do not set drinks on top of the unit or immerse the unit in liquid.
Do Not Disassemble
This device contains no user serviceable parts. All servicing must be performed by a
qualified service technician.
For Safety Reasons
•
•
•
•
Do not place the unit on an unstable surface.
Do not use near water or sources of heat.
Use only recommended attachments.
Use the type of power supply as specified.
Unplug the power to the unit and refer servicing to qualified personnel under the
following conditions:
•
•
If liquid has been spilled or the unit has been exposed to rain or water.
If it does not operate normally when the operating instructions are followed or if it
exhibits a distinct change in performance indicating a need for service.
If the unit has been dropped or the cabinet damaged.
•
(rear)
Connections
PC Source
FIG. 1 Solecis AVB-DA-RGBHV-0103
Product Specifications
Connect the PC source to the Input socket on the rear panel of the unit and
connect monitors, projectors etc to the Output sockets.
AVB-DA-RGBHV-0103 Specifications
•
•
The PC video input is 75 ohm terminated.
RGB Input
The PC video outputs are fully 75 ohm driven for connection to long cable
runs.
Number:
1
Connector:
Level:
BNC
Note: It is imperative that the input source is fully compatible with the display
device.
Analog
1V p-p
75 ohm
Max Level:
Power
•
Connect the supplied power pack to the power socket on the unit or
alternatively use an unregulated 9VDC supply.
Impedance:
Sync Input
Type:
•
Connect the 9V supply to a MAINS source. The power LED on the front of
the unit will light and the input signal will be present on all 3 outputs.
Analog or TTL
Impedance:
RGB Video Bandwidth:
RGB Return Loss:
75 ohm
350MHz -3dB
-45dB@10MHz, -28dB@100MHz
Adjacent Channel X-talk: -70db@10MHz, -50dB@100MHz
RGB Output
Number:
Connectors:
Level:
3
BNC
Analog
Unity
75 ohm
Gain:
Impedance:
Sync Output
Level:
TTL
Impedance:
Power
75 ohm
Connector:
2.1mm DC power jack for use with included external
power supply.
Input Voltage:
9VDC
Power Consumption:
Dimensions (HWD):
Weight:
TBD
43mm x 224mm x 115mm
1.5kg
Included Accessories:
9V Power supply
Download from Www.Somanuals.com. All Manuals Search And Download.
|