User’s Manual
FAVORIT F89078VI-M 24” Stainless Steel Dishwasher -
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
EN
Contents
1
2
INTRODUCTION ....................................................................................................................... 5
SAFETY INFORMATION .......................................................................................................... 7
3
INSTALLATION MATERIAL....................................................................................................10
Kit supplied with dishwasher (models F65478VI-S / F89078VI-S) .........................11
3.1
4
DIMENSIONS OF DISHWASHER ........................................................................................12
5
INSTALLATION AND HOOK-UP..........................................................................................13
Leveling.......................................................................................................................................14
Mounting the feet (only for some models)....................................................................14
Levelling the appliance.........................................................................................................15
Connections..............................................................................................................................16
Connecting to the water supply........................................................................................17
Connecting to the water tap...............................................................................................18
Connecting the drain hose..................................................................................................20
Electrical connections and warnings ...............................................................................25
Commissioning........................................................................................................................26
Installation procedure (all models)...................................................................................26
Procedure for mounting the door panel ............................................................................28
Completion of installation........................................................................................................32
Testing.........................................................................................................................................35
5.1
5.1.1
5.1.2
5.2
5.2.1
5.2.1.1
5.2.1.2
5.2.2
5.3
5.3.1
5.3.2
5.3.3
5.4
Rev 0.0
3
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
INTRODUCTION
EN
1
Thank you for choosing one of our products. To install this dishwasher cor-
rectly and safely, please read this manual carefully. The manual is divided
into sections giving you a step-by-step guide to installation of the appli-
ance. The texts are easy to understand and are complete with detailed
illustrations. This user-friendly manual will provide answers to all your
questions about installation of the dishwasher.
This manual comprises the following sections:
INTRODUCTION: general information about the manual.
WARNINGS: a list of warnings concerning safety during installation.
INSTALLATION INSTRUCTIONS: for the qualified technician who must
carry out the installation, hook-up and testing of the appliance.
Nomenclature of figures and tables:
The progressive number of each figure is shown in the bottom right-hand
corner of the relative box. An example of a progressive number is “Fig.
4-01”, where the first number (4) indicates the section to which the figure
belongs, while the second number (01) indicates the progressive number
of the figure in section 4 (Fig. 4-01 is the first figure in section 4). The tables
are numbered in the same way, bearing in mind that “Tab.” is used instead
of “Fig.” (e.g.: Tab. 4-01 is the first table in section 4). If a table occupies
more than one page, a letter is added after the progressive number (e.g.:
“Tab. 4-01a”, Tab. 4-01b”).
Rev 0.0
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
EN
Symbols used in this manual (see tab. 1-01)
DANGER. This symbol highlights information and warnings which,
if not observed, may compromise personal safety or damage the
appliance.
DANGER OF ELECTROCUTION. This symbol highlights information
and warnings of an electrical nature which, if not observed, may
compromise personal safety or damage the appliance.
This symbol highlights general information and warnings.
Tab. 1-01
6
Rev 0.0
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNINGS
EN
2
SAFETY INFORMATION
THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE AND
MUST THEREFORE BE KEPT INTACT TOGETHER WITH THE MACHINE. BE-
FORE USING THE APPLIANCE, CAREFULLY READ ALL THE INSTRUCTIONS
CONTAINED IN THIS MANUAL. INSTALLATION MUST BE PERFORMED BY
A QUALIFIED TECHNICIAN, IN COMPLIANCE WITH THE REGULATIONS IN
FORCE. THIS APPLIANCE IS INTENDED FOR DOMESTIC USE, AND COM-
PLIES WITH THE DIRECTIVES CURRENTLY IN FORCE, INCLUDING THE
PREVENTION AND ELIMINATION OF RADIO FREQUENCY INTERFERENCE.
THE APPLIANCE IS DESIGNED FOR THE FOLLOWING PURPOSE: WASH-
ING AND DRYING OF DISHES; ANY OTHER USE SHALL BE CONSIDERED
IMPROPER. THE MANUFACTURER DECLINES ALL RESPONSIBILITY
FOR USES OTHER THAN THOSE DESCRIBED ABOVE.
INSTALLATION, REPAIRS AND SERVICING MUST BE PERFORMED BY
QUALIFIED AND AUTHORIZED TECHNICIANS. AS WELL AS INVALI-
DATING THE WARRANTY, WORK CARRIED OUT BY UNAUTHORIZED PER-
SONS MAY GENERATE HAZARDS. INSTALLATION MUST BE PERFORMED
IN COMPLIANCE WITH ALL THE DIRECTIVES IN FORCE IN THE COUNTRY
OF INSTALLATION AND, IF THESE DO NOT EXIST: IN THE UNITED STATES
THE NATIONAL ELECTRIC CODE; IN CANADA THE CANADIAN ELECTRIC
CODE C22.1 - LATEST EDITION/PROVINCIAL AND MUNICIPAL CODES
AND/OR LOCAL CODES.
THE NAME PLATE FEATURING THE TECHNICAL DATA, SERIAL NUMBER
AND MARKINGS IS VISIBLY POSITIONED ON THE INNER EDGE OF THE
DOOR. THE NAMEPLATE ON THE INNER EDGE OF THE DOOR MUST
NEVER BE REMOVED.
THIS APPLIANCE IS NOT SUITABLE FOR USE ON BOATS, CARAVANS OR
THE LIKE. DISHWASHERS CERTIFIED FOR DOMESTIC USE ARE NOT SUIT-
ABLE FOR AUTHORISED FOOD FACTORIES.
CHECK THAT THE VOLTAGE, FREQUENCY AND PROTECTION OF THE
DOMESTIC MAINS POWER SUPPLY MATCH THE RATINGS ON THE NAME
PLATE OF THE APPLIANCE.
Rev 0.0
7
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNINGS
EN
TWO PEOPLE WEARING SAFETY GLOVES ARE REQUIRED TO LIFT
THE DISHWASHER.
DO NOT LEAVING DISCARDED PACKAGING MATERIALS UNSUPERVISED
WITHIN THE HOME. SEPARATE THE VARIOUS PACKAGING MATERI-
ALS AND TAKE THEM TO THE NEAREST SORTED WASTE COLLECTION
CENTRE. KEEP CHILDREN, PHYSICALLY AND/OR MENTALLY IMPAIRED
ADULTS, AND ANIMALS AWAY FROM PACKAGING WASTE; DANGER OF
SUFFOCATION.
BEFORE PROCEEDING WITH INSTALLATION, DISCONNECT THE MAINS
POWER SUPPLY FROM THE WORK AREA.
DURING INSTALLATION, TAKE CARE NOT TO INJURE YOURSELF ON THE
SHARP EDGES OF THE APPLIANCE; WEAR SAFETY GLOVES.
THE APPLIANCE MUST BE PROVIDED WITH A GROUND CONNECTION IN
ACCORDANCE WITH THE ELECTRICAL SAFETY REGULATIONS IN FORCE.
IF IN DOUBT, HAVE THE SYSTEM CHECKED BY A QUALIFIED ELECTRI-
CIAN.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR DAM-
AGE TO PERSONS OR PROPERTY RESULTING FROM THE FAILURE
TO GROUND THE APPLIANCE OR FROM A DEFECTIVE GROUND
CONNECTION.
DO NOT USE APPLIANCES WHICH HAVE BEEN DAMAGED DURING TRAN-
SIT! IF IN DOUBT, CONSULT YOUR DEALER. THE APPLIANCE MUST BE IN-
STALLED AND CONNECTED IN ACCORDANCE WITH THE INSTRUCTIONS
PROVIDED BY THE MANUFACTURER OR BY A QUALIFIED TECHNICIAN.
DO NOT OPERATE THE DISHWASHER UNLESS ALL THE OUTER PANELS
HAVE BEEN POSITIONED CORRECTLY.
IMMEDIATELY AFTER INSTALLATION, BRIEFLY TEST THE APPLIANCE FOL-
LOWING THE INSTRUCTIONS INDICATED BELOW. IF THE DISHWASHER
FAILS TO OPERATE CORRECTLY, DISCONNECT IT FROM THE ELECTRICAL
POWER SUPPLY AND CALL THE NEAREST TECHNICAL SERVICE CENTRE.
DO NOT ATTEMPT TO REPAIR THE APPLIANCE.
8
Rev 0.0
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNINGS
EN
DO NOT USE EXTENSION CORDS, ADAPTORS OR SHUNT CONNECTIONS
IN ORDER TO AVOID THE POSSIBILITY OF OVERHEATING OR BURNING,
WITH CONSEQUENT FIRE HAZARD.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR DAM-
AGE TO PERSONS, ANIMALS OR PROPERTY RESULTING FROM FAIL-
URE TO OBSERVE THE ABOVE PRECAUTIONS, FROM TAMPERING
WITH EVEN A SINGLE COMPONENT OF THE APPLIANCE, OR FROM
THE USE OF UNORIGINAL SPARE PARTS.
IF IN DOUBT ABOUT THE CONTENTS OF THIS MANUAL, CONTACT
THE TECHNICAL ASSISTANCE SERVICE.
Rev 0.0
9
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
INSTALLATION MATERIAL
EN
3
To install the dishwasher correctly, the following materials are required:
•
•
•
•
•
•
•
•
•
•
Phillips screwdriver (ref. A fig. 3-01);
spirit level (ref. B fig. 3-01);
tape measure (ref. C fig. 3-01);
compass saw (ref. D fig. 3-01);
pencil (ref. E fig. 3-01);
file (ref. F fig. 3-01);
13 mm open-ended wrench (ref. G fig. 3-01);
plumbing pliers (ref. H fig. 3-01);
drill (ref. I fig. 3-01);
safety gloves (ref. L fig. 3-01).
B
A
C
D
F
E
H
G
I
L
Fig. 3-01
10
Rev 0.0
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
3.1
Kit supplied with dishwasher
(models F65478VI-S / F89078VI-S)
The kit supplied with the dishwasher comprises:
•
•
•
•
•
•
•
•
•
•
•
•
adhesive steam guard (ref. A fig. 3-02);
1 steel steam guard (ref. B fig. 3-02);*
1 template for door panel (ref. C fig. 3-02);
2 hooks for door panel (ref. D fig. 3-02);
8 screws for securing the door panel hooks (ref. E fig. 3-02);
2 screws for securing the door (ref. F fig. 3-02);
2 screws for fixing the dishwasher to the adjacent walls (ref. G fig. 3-02);
2 screw caps (ref. H fig. 3-02).
2 nuts (only for some models) (ref. I fig. 3-02);
2 washers (only for some models) (ref. L fig. 3-02);
2 adjustment feet (only for some models) (ref. M fig. 3-02).
2 door spacers (only for certain models) (ref. N fig. 3-02)
A
B
D
E
F
G
H
L
M
I
N
Fig. 3-02
* The adhesive protection is suitable for kitchens with worktops that do not allow the steel pro-
tection to be fixed with screws (e.g.:+ marble or masonry), but it can be also used with other
materials.
Rev 0.0
11
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
4
DIMENSIONS OF DISHWASHER (See fig. 4-01)
Model
A (height)
B (width)
C (depth)
86 cm ÷ 91 cm
33-55/64”÷ 35-55/64”
59.7 cm ÷ 59,9 cm
23-1/2”÷ 23-37/64”
57 cm
22-7/16”
F89078VI-M
F89078VI-S
F65478VI-S
F45078I-M
86 cm ÷ 91 cm
33-55/64”÷ 35-55/64”
59.7 cm ÷ 59.9 cm
23-1/2”÷ 23-37/64”
55 cm
21-21/32”
82 cm ÷ 87 cm
32-9/32”÷ 34-1/4”
44.7 cm ÷ 44.9 cm
17-19/32”÷ 17-43/64”
55 cm
21-21/32”
86 cm ÷ 91 cm
33-55/64”÷ 35-55/64”
59.7 cm ÷ 59.9 cm
23-1/2”÷ 23-37/64”
60 cm
23-5/8”
Tab. 4-01
A
B
C
Fig. 4-01
12
Rev 0.0
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
5
INSTALLATION AND HOOK-UP
DURING INSTALLATION, TAKE CARE NOT TO INJURE YOURSELF ON THE
SHARP EDGES OF THE APPLIANCE.
Remove the polystyrene rack blocks. Position the appliance in the chosen instal-
lation position. The sides and rear of the appliance can lie against kitchen units or
walls. If the dishwasher is installed next to a heat source, separate it with a heat
insulating panel in order to prevent overheating and malfunctions. To assure sta-
bility, only install built-in appliances under continuous worktops, securing them
to the adjacent kitchen units or worktop with screws.
BUILDING-IN A DISHWASHER UNDERNEATH A CERAMIC HOB IS ABSO-
LUTELY FORBIDDEN. A DISHWASHER CAN BE BUILT-IN UNDERNEATH
A CONVENTIONAL HOB PROVIDED THERE IS NO BREAK IN THE KITCH-
EN WORKTOP, AND THE DISHWASHER AND HOB ARE INSTALLED AND
SECURED CORRECTLY, SO THAT NO HAZARDS ARE GENERATED.
MAKE SURE THE DISHWASHER HAS BEEN CORRECTLY INSTALLED
AND GROUNDED BY A QUALIFIED FITTER. THIS SAFETY REQUIRE-
MENT MUST BE MET. IN CASE OF DOUBT, CALL IN A QUALIFIED FIT-
TER. THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR
DAMAGE TO PERSONS OR PROPERTY RESULTING FROM THE FAIL-
URE TO GROUND THE APPLIANCE OR FROM A DEFECTIVE GROUND
CONNECTION.
BEFORE PROCEEDING WITH INSTALLATION, DISCONNECT THE
MAINS POWER SUPPLY FROM THE WORK AREA.
Only for free-standing models
•
•
It is strictly forbidden to mount a hob over a free-standing dishwasher.
If the appliance is not in a niche and can therefore be accessed on one side,
cover the door hinge area for safety reasons (cutting hazard). Covers are avail-
able as accessories from specialized retailers or from the Technical Service Cen-
tre.
•
To build in the dishwasher, purchase the relative kit from specialized retailers
or from the Technical Service Centre.
Rev 0.0
13
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
5.1
Leveling
5.1.1 Mounting the feet (only for some models)
Turn the appliance upside-down (see fig. 5-01).
Tighten the nut (see ref. A fig. 5-01) onto the threaded pin (see ref. B fig. 5-01) of
the foot and then fit the supplied washer; do this on both feet.
Screw the feet onto the appliance until the washers touch the base; the two feet
must be manually adjusted to the same height to prevent excessive differences in
height between one foot and the other.
Put the appliance back on its feet.
TWO PEOPLE WEARING SAFETY GLOVES ARE NEEDED TO TURN THE
DISHWASHER UPSIDE-DOWN.
A
B
Fig. 5-01
14
Rev 0.0
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
5.1.2 Levelling the appliance
Level the appliance using the relative adjustable feet (e.g.: ref. A fig. 5-02); use an
open-ended wrench to rotate the feet until the dishwasher is perfectly level.
Some models are fitted with just one rear foot which can be adjusted with a screw
located at the bottom front of the appliance (ref. A fig. 5-03); use a suitable Phillips
screwdriver to turn the screw until the dishwasher is perfectly level.
Use a spirit level to check the appliance is perfectly level (ref. B fig. 5-02).
Leveling is vital for assuring correct dishwasher operation.
Make sure to leave a gap of at least 3 mm (7/64”) between the top of the dish-
washer and the worktop (ref. C fig. 5-02).
Fig. 5-02
Rev 0.0
15
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
A
Fig. 5-03
5.2
Connections
Install the dishwasher so as to allow ease of access to the electrical and hydraulic
connections through the adjacent unit. These connections must never be behind
the dishwasher.
The inlet and drain hoses can be pointed in all directions. make sure that they are
not bent, crushed or too tight. Tighten the ring nut after pointing the hoses in the
required direction.
Figure 5-04 indicates the distances to maintain between the dishwasher and the
various connections.
FIRE HAZARD!
DO NOT COVER OR CRUSH THE CORD PLUG.
A
D
B
C
A = 1200 mm / 47”
B = 1500 mm / 59”
C = 1600 mm / 63”
D = min. 400 mm / 16”
Fig. 5-04
16
Rev 0.0
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
A through hole with a diameter of at least 8 cm (5/32”) is required to pass the
hoses and power cord (ref. A fig. 5-05).
Make sure there area no rough edges that could damage the power cord or hoses.
If the dishwasher is installed in a metal unit protect the edge of the through hole
for the hoses and power cord with a gasket. Do not use extension cords when
making the electrical connection as these do not guarantee safety.
ATTENTION!
INSTALLING THE DISHWASHER IN A NARROW SPACE MAY BEND OR
CRUSH THE POWER CORD. TAKE GREAT CARE IN ORDER TO REDUCE THE
POSSIBILITY OF DAMAGING THE POWER CORD WHEN INSTALLING OR
REMOVING THE APPLIANCE.
A
Fig. 5-05
5.2.1 Connecting to the water supply
PREVENTING THE RISK OF CLOGGING OR DAMAGE: IF THE WATER
PIPE IS NEW OR HAS NOT BEEN USED FOR A LONG TIME, BEFORE CON-
NECTING TO THE WATER SUPPLY CHECK THAT THE WATER IS CLEAR
AND FREE OF IMPURITIES, TO PREVENT DAMAGE TO THE APPLIANCE.
THE DISHWASHER MUST ALWAYS BE CONNECTED TO THE WATER
SYSTEM WITH NEW HOSES; OLD OR USED HOSES MUST NEVER BE
REUSED.
Rev 0.0
17
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
5.2.1.1 Connecting to the water tap
Connect the inlet hose to a threaded ¾” gas cold water tap, fitting the supplied
filter (ref. A fig. 5-06). Firmly secure the hose by tightening the relative ring nut
with your hands (ref. B fig. 5-06); finish by tightening another ¼ turn using a
pair of plumbing pliers. For models fitted with ACQUASTOP (ref. C fig. 5-06)
the filter is already present in the threaded ring nut.
The dishwasher can be filled with water at a temperature of less than 60°C
(140°F).
If the appliance is filled with hot water, washing times will be reduced by about
20 minutes, but efficiency will be slightly impaired. Make the connection to the
domestic hot water tap using the same methods described for connecting the
appliance to the cold water tap.
•
•
Recommended temperature: 49°C (120°F), max. 60°C (140°F).
Recommended water pressure: 0.5 - 9 bar (7 -130 PSI).
If the pressure is too high, fit a pressure reducer.
A rubber hose connected to a sink spray may burst if installed on the same
pipes feeding the dishwasher. If your sink is fitted with this accessory, re-
move the hose and plug the hole.
Fig. 5-06
18
Rev 0.0
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
Do not cut the inlet hose (see fig. 5-07).
If the hose is cut, the dishwasher will not work, water will leak and you may be
injured.
If the hose is too long, wind it up tidily and place it behind the appliance.
The cable harness and electrical components must not come into contact with
the hydraulic system and the water inlet and drain hoses.
Fig. 5-07
When connecting the dishwasher drain hose to the sink make sure that the hose
is not bent (ref. A fig. 5-08) in order to prevent cracks or breakages that could
damage it.
A
Fig. 5-08
Rev 0.0
19
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
5.2.1.2 Connecting the drain hose
Connecting to a drain
Insert the relative hose into a drain with a minimum diameter of 4 cm (1-37/64”)
(ref. A fig. 5-09); alternatively, place the hose on the sink (ref. B fig. 5-09) using
the supplied hose support (see fig. 5-10), but taking care to avoid obstructions or
excessive curving. Make sure the hose cannot fall out. For this purpose, the hose
support is fitted with a hole (ref. A fig. 5-10) which can be used to fix it to the wall
or the tap with a piece of string. The free end must lie at a height ranging from
of 30 to 100 cm (from of 1-7/32” to 3-59/64”) (see fig. 5-09) and must never be
immerged in water. If horizontal extension hoses with a maximum length of 3m
are used, position the drain hose at a maximum height of 85 cm (3-11/32”) above
the floor.
B
A
min O4 cm
1-37/64”
Fig. 5-09
A
Fig. 5-10
20
Rev 0.0
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
Connecting to a “T” union of the drain circuit
MAKE THE CONNECTION UPLINE FROM THE SIPHON OF THE DRAIN
LINE AND AT LEAST 400 mm (15-3/4”) ABOVE THE FLOOR ON WHICH
THE DISHWASHER WILL BE INSTALLED.
1. Connect the dishwasher drain hose (ref. A fig. 5-11) to the “T” union (ref. B fig.
5-11) of the drain circuit using a 38 to 50 mm (1-1/2 to 2”) screw clamp* (ref. C
fig. 5-11); if necessary, cut the end of the dishwasher drain hose (ref. D fig. 5-11)
(do not cut the corrugated section).
* Available from any plumbing stockist
B
C
D
A
Fig. 5-11
Rev 0.0
21
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
Connecting to a waste disposal unit with an air gap
MAKE THE CONNECTION UPLINE FROM THE SIPHON OF THE DRAIN
LINE AND AT LEAST 400 mm (15-3/4”) ABOVE THE FLOOR ON WHICH
THE DISHWASHER WILL BE INSTALLED.
1. Remove the cover of the waste disposal unit (ref. A fig. 5-12).
2. Connect the dishwasher drain hose (ref. B fig. 5-12) to the air gap (ref. C fig.
5-12) using the wide spring clamp (ref. D fig. 5-12); if necessary, cut the end of
the dishwasher drain hose (ref. E fig. 5-12) (do not cut the corrugated section).
If the drain hose has been cut, use a 38 to 50 mm (1-1/2 to 2”) screw clamp*.
3. To connect the air gap (ref. C fig. 5-12) to the waste disposal unit inlet (ref. F fig.
5-12), use a rubber union* (ref. G fig. 5-12) with spring or screw clamps* (ref. H
fig. 5-12).
* Available from any plumbing stockist
C
A
D
H
G
H
E
B
Fig. 5-12
22
Rev 0.0
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
Connecting to the air gap (no waste disposal unit)
MAKE THE CONNECTION UPLINE FROM THE SIPHON OF THE DRAIN
LINE AND AT LEAST 400 mm (15-3/4”) ABOVE THE FLOOR ON WHICH
THE DISHWASHER WILL BE INSTALLED.
1. Connect the dishwasher drain hose (ref. A fig. 5-13) to the air gap (ref. B fig.
5-13) using the wide spring clamp (ref. C fig. 5-13); if necessary, cut the end of
the dishwasher drain hose (ref. D fig. 5-13) (do not cut the corrugated section).
If the drain hose has been cut, use a 38 to 50 mm (1-1/2 to 2”) screw clamp*.
2. To connect the air gap (ref. B fig. 5-13) to the “T” union (ref. E fig. 5-13) of the
drain line, use a rubber union* (ref. F fig. 5-13) with spring or screw clamps*
(ref. G fig. 5-13).
* Available from any plumbing stockist
B
C
G
E
F
D
A
G
Fig. 5-13
Rev 0.0
23
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
Connecting to a waste disposal unit (no air gap)
MAKE THE CONNECTION UPLINE FROM THE SIPHON OF THE DRAIN
LINE AND AT LEAST 400 mm (15-3/4”) ABOVE THE FLOOR ON WHICH
THE DISHWASHER WILL BE INSTALLED.
1. Remove the cover of the waste disposal unit (ref. A fig. 5-14).
2. Connect the dishwasher drain hose (ref. B fig. 5-14) to the waste disposal unit
inlet (ref. C fig. 5-14), using the wide spring clamp (ref. D fig. 5-14).
A
C
D
B
Fig. 5-14
24
Rev 0.0
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
5.2.2 Electrical connections and warnings
CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE MAINS MATCH
THE RATINGS ON THE NAME PLATE OF THE APPLIANCE POSITIONED ON
THE INNER EDGE OF THE DOOR.
IN THE EVENT OF DAMAGE TO THE SUPPLY CORD, HAVE IT RE-
PLACED BY THE MANUFACTURER OR AN AUTHORIZED TECHNICAL SER-
VICE CENTRE.
THIS APPLIANCE MUST BE GROUNDED. IN CASE OF A MALFUNCTION OF
FAULT, THE GROUND REDUCES THE RISK OF ELECTROCUTION BY PRO-
VIDING THE ELECTRICAL CURRENT WITH AN ALTERNATIVE, LESS RESIS-
TANT PATH.
THIS APPLIANCE MUST BE GROUNDED. IN CASE OF A MALFUNCTION OF
FAULT, THE GROUND REDUCES THE RISK OF ELECTROCUTION BY PRO-
VIDING THE ELECTRICAL CURRENT WITH AN ALTERNATIVE, LESS RESIS-
TANT PATH. THIS APPLIANCE IS FITTED WITH A SUPPLY CORD CONTAIN-
ING A GROUND WIRE AND PLUG. FIT THE PLUG INTO A SUITABLE SOCKET,
INSTALLED AND GROUNDED IN COMPLIANCE WITH THE LAWS IN FORCE
IN THE COUNTRY OF INSTALLATION.
BEFORE MAKING ELECTRICAL CONNECTIONS, DISCONNECT THE
MAINS POWER SUPPLY FROM THE WORK AREA.
Grounding instructions
This appliance is fitted with a cord with ground wire and plug. Fit the plug into
a suitable socket, installed and grounded in compliance with the laws in force in
the country of installation.
CHECK THAT THE MAINS SUPPLY IN THE PLACE OF INSTALLATION COM-
PLIES WITH THE REGULATIONS IN FORCE IN THE COUNTRY OF USE, AND
THAT IT IS CORRECTLY GROUNDED.
AN INCORRECTLY CONNECTED GROUND WIRE MAY GENERATE THE RISK
OF ELECTROCUTION. IF IN DOUBT AS TO THE CORRECT GROUNDING OF
THE APPLIANCE, CALL IN A QUALIFIED ELECTRICIAN OR THE TECHNICAL
ASSISTANCE SERVICE. DO NOT CHANGE THE PLUG ATTACHED TO THE
APPLIANCE. IF THE PLUG IS NOT SUITABLE FOR THE SOCKET, CALL IN A
QUALIFIED ELECTRICIAN TO FIT A SUITABLE PLUG.
Rev 0.0
25
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
The plug at the end of the power cord and the corresponding socket must be of
the same type and must conform to current regulations governing electrical ap-
pliances. The plug must be accessible after installation. Never remove the plug
by pulling on the wire. If the power cord is damaged, have it replaced by the
manufacturer or an authorized service centre.
DO NOT USE EXTENSION CORDS, ADAPTORS OR SHUNT CONNECTIONS
IN ORDER TO AVOID THE POSSIBILITY OF OVERHEATING OR BURNING,
WITH CONSEQUENT FIRE HAZARD.
IN THE EVENT OF DAMAGE TO THE SUPPLY CORD, HAVE IT REPLACED BY
THE MANUFACTURER OR AN AUTHORIZED TECHNICAL SERVICE CENTRE
IN ORDER TO AVOID ANY RISK.
5.3
Commissioning
5.3.1 Installation procedure (all models)
Clean the underneath of the worktop lying over the dishwasher door (see fig.
5-15) and apply the steam guard, as shown in fig. 5-16 (see fig. 5-16 if the adhe-
sive guard is applied; see fig. 5-17 if the steel guard is applied). This guard protects
the worktop from steam and condensation when the door of the dishwasher is
opened at the end of the washing cycle.
Fig. 5-15
26
Rev 0.0
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
Fig. 5-16
Fig. 5-17
Push the dishwasher into position, taking care not to twist or crush the power
cord or hoses (see fig. 5-18).
TWO PEOPLE WEARING SAFETY GLOVES ARE NEEDED TO PUSH THE
DISHWASHER INTO PLACE.
Fig. 5-18
Rev 0.0
27
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
5.3.2 Procedure for mounting the door panel
Mount the door panel.
Place the template on the inner surface of the panel, centering it along the upper
side and matching up the reference locators (ref. A fig. 5-19); mark the position of
the door hooks with a pencil (see fig. 5-19). Remove the template and use a drill
with a suitable bit to make holes at the points marked on the panel.
A
A
Fig. 5-19
Use the screwdriver to secure the door hooks with the 8 supplied screws (see fig.
5-20) at the marked reference points.
Fig. 5-20
28
Rev 0.0
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
Drill holes for the panel handle using a drill with a suitable bit. Use the screwdriver
to secure the door handle before hooking the panel to the dishwasher (see fig.
5-21).
N.B.: the screws are not supplied.
Fig. 5-21
Insert the door spacers contained in the accessory bag (see fig. 5-22).
Fig. 5-22
Rev 0.0
29
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
Attach the door panel: fit the hooks into their slots on the dishwasher and allow
the panel to slide downwards and slip in to place (see fig. 5-23).
1
2
Fig. 5-23
Secure the door to the panel with the supplied screws. The panel must have a
minimum thickness of 20 mm (25/32”) (see fig. 5-24).
Fig. 5-24
30
Rev 0.0
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
Make sure the dishwasher door, complete with panel, opens comfortably and
that the base plate (ref. A fig. 5-25) does not prevent it from opening fully. If the
base plate prevents the door from opening, mark out the section to remove (see
fig. 5-25), take out the base plate and cut it along the marking using a compass
saw (see fig. 5-26).
600 mm (23-53/64")
450 mm (23/32")
A
Fig. 5-25
Fig. 5-26
Rev 0.0
31
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
5.3.3 Completion of installation
Finish the cut with a file (see fig. 5-27) in order to remove any burrs and/or imper-
fections. Put back the base plate (see fig. 5-28) and try to open the dishwasher
door fully; if the base plate still obstructs the door, repeat the above operations.
Fig. 5-27
Fig. 5-28
32
Rev 0.0
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
Before securing the dishwasher to the adjacent units, attach the gaskets to the
sides.
Remove the adhesive band on the gasket (see fig. 5-29).
Fig. 5-29
Fix the gasket to the dishwasher, inserting it in the seat on the sides towards the
front (see fig. 5-30), and making sure that the long side of the gasket, the one with
the hole for inserting the screw, is attached to the outside of the dishwasher; the
hole in the long side must match the hole in the dishwasher (see ref. A fig. 5-31).
Make sure the gasket adheres perfectly to the dishwasher.
Fig. 5-30
Rev 0.0
33
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
A
Fig. 5-31
Fig. 5-32 shows the state of the dishwasher after the above operations are per-
formed.
Fig. 5-32
34
Rev 0.0
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
EN
Tighten the supplied screws with a screwdriver; this operation definitively fixes
the dishwasher to the adjacent units; cover the side holes using the supplied
plugs (ref. A fig. 5-33).
A
Fig. 5-33
5.4
Testing
After installation, test the dishwasher by starting a work cycle. Check for leaks and
make sure the appliance does not malfunction.
Rev 0.0
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Q - Warranty
AEG products are designed and built to the highest standards.
We expect your appliances to provide many years of trouble free enjoyment.
In the event of an appliance requiring attention, each appliance is covered by a 2
year warranty from the date of purchase.
Refer to warranty policy for complete terms and conditions.
Coverage is for costs of parts and labor for appliances in capital cities &
metropolitan areas. We reserve the right to charge directly for handling
expenses outside the metropolitan region.
AEG products are supported by a national service support system.
Call our customer service department for attention.
Please retain your invoice AEG to quote should you require service
assistance. This will identify your product for our priority service back-up.
Please attach your invoice to this manual for easy future reference.
AEG Canada
871 Cranberry Court
Oakville, Ontario L6L 6J7
Canada
Tel 905-829.3980
Fax 905-829.3985
email [email protected]
For Service & Spares:
EURO-PARTS
1.800.678.8352
Important: Please record details of your purchase below and mail or fax to AEG
-----------------------------------------------------------------------------------------cut along line ------------------------------------------------------------------------------------
Na
m
e
:
TEL
No
Add
r
ess:
C
i
t
y
:
S
ta
te
:
Zi
p
Code:
Where purchased:
Purchase
pu
d
a
e
t
d
e
:
:
I
te
m
s
r
c
h
a
s
Ser
i
a
l
No. (s):
33
Download from Www.Somanuals.com. All Manuals Search And Download.
|