JOBAID
TOTAL ACCESS 4303 PLUS DC POWER SUPPLY
61202335L1-22A
0401
FRONT PANEL LEDs
ALARM RELAYS
DC SUPPLY
There are eight alarm relays that provide normally open or normally closed
contacts for each of the following alarms:
POWER G Off
Both –48 VDC fuses blown, power not supplied to the shelf,
or incorrect polarity on the voltage supplied to the shelf
CLEI: SLPOCDBC_ _
G Green
G Amber
G Red
Power supplied is the correct voltage and polarity; backplane
and hot insertion voltages correct
–48 VDC input and hot insertion voltage present; no back-
plane voltage
–48 VDC input present; no backplane voltage and no hot
insertion voltage
I Visual Critical
I Visual Major
I Visual Minor
I Audible Critical
I Audible Major
I Audible Minor
I Auxiliary 1
TEMP
G Off
G Red
Normal
Over-temperature condition
I Auxiliary 2
DESCRIPTION
®
POWER SUPPLY 48 PIN CONNECTOR PINOUT
The Total Access 4303 Plus DC Power Supply is a removable assembly that provides
the voltages necessary for proper system operation. The unit features LEDs for over-
temperature and DC output, an input fuse, and the ability to be hot-swapped when
used with another DC supply in the same chassis. The supply interfaces to the Total
Access backplane through a 48-pin connector. The unit accepts one or two –48 VDC
inputs from the backplane and supplies –48 VDC fused output for use with external
input logic, +5 VDC as hot insertion bias voltage for modules, and +2.1 VDC for back-
plane termination. In addition, the Total Access 4303 Plus DC Supply provides alarm
relay ouputs when installed in slot PS-A.
Pin #
1
2
3
4
5
6
7
8
Row A Signal
AUD_CRIT_NO
AUD_MAJ_NO
AUD_MIN_NO
VIS_CRIT_NO
VIS_MAJ_NO
VIS_MIN_NO
AUX1_RLY_NO
AUX2_RLY_NO
–48V_A
Row B Signal
AUD_CRIT_COM
AUD_MAJ_COM
AUD_MIN_COM
VIS_CRIT_COM
VIS_MAJ_COM
VIS_MIN_COM
AUX1_RLY_COM
AUX2_RLY_COM
PS_OK
Row C Signal
AUD_CRIT_NC
AUD_MAJ_NC
AUD_MIN_NC
VIS_CRIT_NC
VIS_MAJ_NC
VIS_MIN_NC
AUX1_RLY_NC
AUX2_RLY_NC
PS_TEMP
The following features are supported on the Total Access 4303 Plus DC Power Supply:
9
I Thermal limit indicator with open collector output
10
11
12
13
14
15
16
–48V_B
2.1V
–48V_AB_RTN
GND
GND
2.1V
2.1V
2.1V
GND
GND
PSRLY_LOAD
–48V
PS_PRESENT
2.1V
VCC
I DC status indicator on the 2.1 and 5 volt outputs with open collector output
I Short circuit protection
GND
I Compatible with existing Total Access DC Power Supplies (P/N 1200335L1)
PSRLY_CLK
PSRLY_DATAIN
PSRLY_DATAOUT
GND
FR_GND
SPECIFICATIONS
Specifications
Input Voltage
Operating Temperature
Storage Temperature
–42 VDC to –56 VDC
–40°C to +65°C
–40°C to +85°C
Relative Humidity
Up to 95% noncondensing
90°C 5%
Fused 1-amp slow blow
Self-mending
FCC Part 15, UL 60950, NEBS Level III,
GR-1089-CORE
Over Temperature Indication
–48 VDC Short Circuit Protection
Backplane Voltage Short Circuit Protection
Compliance
C A U T I O N !
SUBJECT TO ELECTROSTATIC DAMAGE
OR DECREASE IN RELIABILITY.
HANDLING PRECAUTIONS REQUIRED.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
3M Oxygen Equipment 7187 User Manual
Acu Rite Automobile Accessories 516353 21 User Manual
Aiwa Stereo System Z L31 User Manual
Alps Electric Switch SSCM Series User Manual
Aluratek Computer Drive AHDUS350 User Manual
Aluratek Computer Hardware Micro SD User Manual
American Standard Indoor Furnishings T970702 User Manual
Ayre Acoustics Stereo System C 5xe User Manual
Behringer DJ Equipment FX2000 User Manual
Behringer Electronic Keyboard UMA25S User Manual