High Density LSX 288-Position Panel
Termination and Termination/Splice Configurations
LSX 288-Position Preterminated Panel
ADC introduces the new high-density LSX 288-position panel available preterminated
with intrafacility (IFC) or outside plant (OSP) cables or in termination and splice configurations.
ADC’s 288-position LSX panel (with either SC or LC) offers integrated vertical cable guides
(VCG’s) within the panel, as well as on each side of the panel. VCG’s effectively segregate cables,
aiding in easy-to-follow routing paths. The angled bulkhead style panel offers additional protection
from bends that can increase attenuation and loss.
Features and Benefits:
• Integrated cable management
• Angled bulkhead panel
• Vertical cable guides
• Available in SC and LC connector styles and multiple fiber cable styles
• 288 terminations using either SC or LC connectors
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
High Density LSX 288-Position Panel
Termination/Splice Panel
LSX 288-Termination and Splice Panel—Splicing in the rear eliminates rack space for a
dedicated splice point. Panel is shown here from front vantage (left) and back vantage (right)
ADC’s 288-positon LSX panel is also available in a termination and splice configuration. While ADC
recommends off-frame splicing in high-density applications, often floor-space is limited and on-frame
splicing is required in a high density environment. In a 18-inch deep frame*, this panel solution saves
the valuable rack space often required for a dedicated splice panel. Panels can be ordered with 12-fiber
ribbon or 12-fiber stranded pigtails. Splice trays and cable clamps are included within the panel.
Termination/Splice Panels
O rd e r i n g I n f o r m a t i o n
Connector style
SC/APC
Pigtail Type
Ribbon-Indoor
Ribbon-Indoor
Ribbon-Indoor
Ribbon-Indoor
Stranded-Indoor
Stranded-Indoor
Stranded-Indoor
Stranded-Indoor
Splice Type
Mass Fusion
Catalog Number
LSX-LL5243-A-SPL
LSX-L75243-A-SPL
LSX-LM5243-A-SPL
LSX-LK5243-A-SPL
LSX-LL1242-A-SPL
LSX-L71242-A-SPL
LSX-LM1242-A-SPL
LSX-LK1242-A-SPL
SC/UPC
Mass Fusion
LC/APC
Mass Fusion
LC/UPC
Mass Fusion
SC/APC
Heatshrink Fusion
Heatshrink Fusion
Heatshrink Fusion
Heatshrink Fusion
SC/UPC
LC/APC
LC/UPC
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
*See page 5 for additional accessories that accommodate the deeper panel.
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
3
Download from Www.Somanuals.com. All Manuals Search And Download.
High Density LSX 288-Position Panel
High-Density Distribution Solution (using 288-Termination-Only panel)
39
35
30
25
20
2.1 m (7')
CABLE TIE
BRACKETS
15
10
5
1
2" BUMPER GB
203 mm
(8")
660 mm
(26")
381 mm
(15")
3.4 m (11')
aDC’s recommended fiber frame lineup uses four frames with 2 mm fiber
jumpers to maintain the industry standard 2-inch patch cord pile-up
The preterminated LSX-288 solution utilizes a traditional frame designed to fit a variety of termination,
splice and storage applications. This front load frame is built to ensure commonality with patch cord
routing, slack storage and fiber protection. It is shipped complete with top and bottom troughs.
Available accessories include interbay management panels (IMPs).
Density Recommendations
Panels/Frame
Terminations/Frame
Recommended maximum Frame Lineup
5
1,440
4 frames (5,760 terminations)
Recommended Patch Cord Lengths
Number of Frames
approximate Patch Cord Length
5 m (16.4')
1
2
3
4
6 m (19.7')
6 m (19.7')
7 m (23')
O rd e r i n g I n f o r m a t i o n
Description
Dimensions (H x W x D)
Catalog Number
High-Density Frame (includes 8" deep front troughs)
2.1 m x 660 mm x 381 mm
(7' x 26" x 15")
E-501-LGX-HD
Interbay Management Panel (includes 8" deep
troughs and spools)
2.1 m x 127 mm x 381 mm
(7' x 5" x 15")
E-501-L139-HD
288-Termination-Only Distribution Panel
279 mm x 584 mm x 305 mm
(11" x 23" x 12")
Refer to previous
pages for catalog
numbers
End Guard
2.1 m x 64 mm x 381 mm
(7' x 2.5" x 15")
RAC-7B0162
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
4
Download from Www.Somanuals.com. All Manuals Search And Download.
High Density LSX 288-Position Panel
High-Density Distribution Solution (using 288-Termination/Splice panel)
39
35
30
25
20
2.1 m (7')
CABLE TIE
BRACKETS
15
10
5
1
5" GUARD BOX
660 mm
(26")
203 mm (8")
457 mm (18")
3.4 m (11' )
aDC’s recommended fiber frame lineup uses four frames with 2 mm fiber
jumpers to maintain the industry standard 2-inch patch cord pile-up
The termination and splice LSX-288 solution utilizes a traditional frame designed to fit a variety of
termination, splice and storage applications. This front load frame is built to ensure commonality with
patch cord routing, slack storage and fiber protection. It is shipped complete with top and bottom
troughs. Available accessories include interbay management panels (IMPs).
O rd e r i n g I n f o r m a t i o n
Description
Dimensions (H x W x D)
Catalog Number
High-Density Frame (includes 8" deep front troughs)
2.1 m x 660 mm x 381 mm
(7' x 26" x 15")
E-501-LGX-HD
Frame Rear Guard Box
(rear 2-inch bumper should be
removed and replaced with this item)
660 mm x 127 mm
(26" x 5")
RAC-0X0439
Interbay Management Panel (includes 8" deep
troughs and spools)
2.1 m x 127 mm x 381 mm
(7' x 5" x 15")
E-501-L139-HD
RAC-0X0440
Interbay Management Panel Rear Guard Box
(rear 2-inch bumper should be
127 mm x 127 mm
(5" x 5")
removed and replaced with this item)
288-Termination/Splice Distribution Panel
279 mm x 584 mm x 381 mm
(11" x 23" x 15")
Refer to previous
pages for catalog
numbers
End Guard
2.1 m x 64 mm x 381 mm
(7' x 2.5" x 15")
RAC-7B0162
Universal End Guard Extender
2.1 m x 64 mm x 76 mm
(7' x 2.5" x 3")
E-501-12002
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
5
Download from Www.Somanuals.com. All Manuals Search And Download.
High Density LSX 288-Position Panel
Homerun Splitter Solution
Parking Lot
Plug and Play
Splitters
288-Termination
Panels
Parking Lot
Plug and Play
Splitters
288-Termination
Panels
ADC’s homerun splitter solution incorporates the LSX 288-position distribution panel along with plug
and play splitter modules for central office splitting. Able to effectively manage 1,152 homes within
a seven-foot frame, this solution offers excellent density with ADC’s built-in cable management. In
addition, these same plug and play splitter modules are commonly used within ADC’s outdoor Fiber
Distribution Hubs (FDHs), allowing for easy-to-manage inventory with one splitter type versatile enough
for both inside and outside environments.
O rd e r i n g I n f o r m a t i o n
Description
Dimensions (H x W x D)
Catalog Number
Network Rack with 2" WECO mounting spaces
(shipped with 8-inch front guard box)
2.14 m x 660 mm x 381 mm
(7' x 26" x 15")
RAC-7A0501
Frame Rear Guard Box*; (rear 2-inch bumper should
be removed and replaced with this item)
660 mm x 127 mm
(26" x 5")
RAC-0X0439
E-501-L139-HD
RAC-0X0440
Interbay Management Panel
2.1 m x 127 mm x 381 mm
(7' x 5" x 15")
Interbay Management Panel Rear Guard Box*
(rear 2-inch bumper should be removed and replaced
with this item)
127 mm x 127 mm
(5" x 5")
End Guard
2.1 m x 64 mm x 381 mm
(7' x 2.5" x 15")
RAC-7B0162
E-501-12002
Universal End Guard Extender*
288-Termination Distribution Panel
2.1 m x 64 mm x 76 mm
(7' x 2.5" x 3")
279 mm x 584 mm x 305/381 mm Refer to previous pages
(11" x 23" x 12/15")
for catalog numbers
Rack Mount Splitter Chassis – accommodates
up to 24 plug and play splitters
176 mm x 483/584 mm
(7" x 19/23")
FPS-MPPRACKMT24
Cable Management for Rack Mount Splitter Chassis
127 mm x 483/584 mm
(5" x 19/23")
FPS-MPPRACKMTCM
ACE-ACC200-PKLT3
FPS-MPP1AJJ
Parking Lot Panel for Rack Mounts
(accommodates three 1 x 32 splitter outputs)
89 mm x 483/584 mm
(3.5" x 19/23")
1 x 32 Plug and Play Splitter Module Plug-in
*used only when termination/splice panel is loaded into frame.
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
w w w . a d c . c o m + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 1 - 8 0 0 - 3 6 6 - 3 8 9 1
•
•
6
Download from Www.Somanuals.com. All Manuals Search And Download.
High Density LSX 288-Position Panel
Outside Plant Controlled Environment Active Cabinet Solution
active shelf
(not included)
Fiber management
Tray (FmT)
LSX 288-panel
ADC’s LSX-288 panels are also well suited to a controlled environment cabinet where limited rack space
and high termination counts are necessary. Used in conjunction with ADC’s Fiber Management Tray and
RiserGuide1 on-demand cable management, this solution can meet both the termination demands, and
cable management requirement for a future-proofed network.
O rd e r i n g I n f o r m a t i o n
Description
Dimensions (H x W x D)
Catalog Number
288-Termination or Termination/Splice
Distribution Panel
279 mm x 584 mm x 305/381 mm Refer to previous pages for
(11" x 23" x 12/15")
catalog numbers
FMT Bulk Storage Drawer
44 mm x 584 mm x 305 mm
(1.75" x 23" x 12")
FMT-DBS000000-A00P2
1 For more information on RiserGuide on-demand cable management, see ADC literature #101573AE.
2 For more information on Fiber Management Trays (FMTs), see ADC literature #103743AE.
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
7
Download from Www.Somanuals.com. All Manuals Search And Download.
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our website.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
106370ae 8/08 original
©
2008 aDC Telecommunications, inc. all Rights Reserved
Download from Www.Somanuals.com. All Manuals Search And Download.
|