3M Projector S15i User Manual

_MS1_ul5_tii_{media Projector}

Operator's Guide

Thank you for purchasing this projector.

WARNING ŹBefore using, read the "Product Safety Guide" and these

manuals to ensure correct usage through understanding. After reading, store

them in a safe place for future reference.

About this manual

Various symbols are used in this manual. The meanings of these symbols are

described below.

WARNING This symbol indicates information that, if ignored, could possibly

result in personal injury or even death due to incorrect handling.

CAUTION This symbol indicates information that, if ignored, could result

possibly in personal injury or physical damage due to incorrect

handling.

Please refer to the pages written following this symbol.

NOTE • The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in this manual.

• The reproduction, transmission or use of this document or contents is not permitted without

express written authority.

Trademark acknowledgment

• VGA and XGA are registered trademarks of the International Business Machines

Corporation.

• Apple and Mac are registered trademarks of Apple Computer, Inc.

• VESA and SVGA are trademarks of the Video Electronics Standard Association.

• Windows is a registered trademark of Microsoft Corporation.

• Internet Explorer is a trademark of Microsoft Corporation.

All other trademarks are the property of their respective owners.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Projector features / About contents of package

Projector features

This projector is used to project various computer signals as well as NTSC / PAL

/ SECAM video signals onto a screen. It requires just a little space for installation

and gets a large image from short distance.

High Brightness

Newly developed 165W UHB (Ultra High Brightness) lamp gives you a higher

brightness image on a screen. The image can be still kept as bright and clean

enough for use in bright rooms.

Low Noise

WHISPER mode is equipped for reducing acoustic noise to realize quieter

operation. It is perfect for use in low luminance rooms where low noise is more

important than brightness.

Compact Body

Even with its many features, this projector is extremely compact and slim,

ZKLFKꢀJLYHVꢀ\RXꢀPRUHꢀÀH[LELOLW\ꢀDQGꢀXVDELOLW\ꢀWRꢀXVHꢀLWꢀZKHUHꢀ\RXꢀZDQWꢂ

About contents of package

Your projector should come with the items shown below. Contact immediately your

dealer if anything is missing.

NOTE • Keep the original packing materials for future reshipment. For

moving the projector, be sure to use the original packing material. Use special

caution for the lens part.

STANDBY/ON

VIDEO

RGB

AUTO

ASPECT

BLANK

MAGNIFY

VOLUME

MUTE

OFF

FREEZE

KEYSTONE

ZOOM

POSITION

ENTER

ESC

RESET

Projector

(with Lens cover)

Remote control

(with two AA batteries)

Strap

(for Lens cover)

S15i

VGA cable

Soft case

Power cord

Operator's Guide

Filter cover

(US, UK, EUROPE)

Product SafetyGuide

Quick Start Guide

Warranty

ꢃIRUꢀERWWRPꢁXSꢀXVHꢄ

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Part names

Projector

Focus ring ( 19)

Remote sensor ( 8)

Vent ( 10)

Speaker

Lens ( 16, 45)

Elevator button ( 12)

Elevator foot ( 12)

Lens cover ( 6, 16)

)URQWꢁ5LJKWꢀVLGH

Lamp door ( 42)

Filter cover ( 9, 10, 43)

ꢃ$LUꢀ¿OWHUꢀDQGꢀLQWDNHꢀYHQWꢀ

are inside.)

(Lamp unit is inside.)

Bottom side

Power switch ( 16, 17)

AC inlet ( 15)

Control buttons ( 5)

Elevator button ( 12)

Elevator foot ( 12)

Vent ( 10)

Ports

(See below.)

5HDUꢁ/HIWꢀVLGH

6ꢁ9,'(2ꢀSRUWꢀ

(

14)

RGB port ( 14)

VIDEO port ( 14)

AUDIO port ( 14)

Restart switch ( 50)

RGB

CONTROL

S-VIDEO

VIDEO

AUDIO

CONTROL port ( 14)

Kensington lock slot

Ports

NOTE (*) About Restart switch: This projector is controlled by an internal

microprocessor. Under certain exceptional circumstances, the projector may not

operate correctly and the microprocessor will need to be reset. In such a case,

please push the Restart switch by using a cocktail stick or similar, and before

turning on again, make the projector cool down at least 10 minutes without

operating. Only push the Restart switch in these exceptional instances.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Part names

Controls

LAMP indicator ( 48)

TEMP indicator ( 48)

POWER indicator ( 16, 17, 48)

LAMP

TEMP

POWER

INPUT

INPUT button ( 18)

Cursor buttons

ŸꢅźꢅŻꢅŹꢀꢃ 18~40)

STANDBY/ON button ( 16, 17)

STANDBY/ON

Remote control

STANDBY/ON button

SEARCH button ( 19)

RGB button ( 18)

(

16, 17)

AUTO button ( 20)

BLANK button ( 21)

STANDBY/ON

BLANK

VIDEO button ( 18)

ASPECT button ( 19)

RGB

VIDEO

ASPECT

AUTO

VOLUME

MUTE

MAGNIFY

VOLUME button ( 18)

MUTE button ( 18)

MAGNIFY

ON button ( 21)

OFF button ( 21)

OFF

KEYSTONE button ( 20)

FREEZE

KEYSTONE

Zoom

ZOOM

FREEZE button ( 21)

POSITION button ( 20)

ESC button ( 24)

+ button ( 19)

ꢁꢀEXWWRQꢀꢃ 19)

POSITION

ENTER

MENU button ( 22)

RESET

ESC

Menu cursor buttons

ŸꢅźꢅŻꢅŹꢃ 18~40)

ENTER button ( 18~40)

RESET button ( 24)

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Preparations

Fastening the lens cover

WARNING ŹDo not fasten the lens cover during use or immediately after

use. Handling while the projector is in a high temperature could cause a burn

and/or malfunction to the projector. Before operating, make sure that the power

switch is off, that the power cord is not plugged in, and that the projector is cool

adequately.

To avoid losing, please fasten the lens cover to the projector using the strap.

Slowly turn over the projector, so that the bottom is facing up.

2. ^{Fix the strap to the strap ring of projector.}

Strap ring

Strap

(1)

(2)

Strap ring

Projector (Bottom side)

3. ^{Fix the strap to the strap ring of lens cover.}

Lens cover

Strap

(1)

(2)

Strap ring

Attach the lens cover to the lens of projector, and slowly turn over the

projector, so that the top is facing up.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Preparations

Putting batteries

WARNING ŹAlways handle the batteries with care and use them only as

directed. Improper use may result in battery explosion, cracking or leakage,

ZKLFKꢀFRXOGꢀUHVXOWꢀLQꢀ¿UHꢅꢀLQMXU\ꢀDQGꢆRUꢀSROOXWLRQꢀRIꢀWKHꢀVXUURXQGLQJꢀHQYLURQPHQWꢂ

‡ꢀ%HꢀVXUHꢀWRꢀXVHꢀRQO\ꢀWKHꢀEDWWHULHVꢀVSHFL¿HGꢂꢀ'RꢀQRWꢀXVHꢀEDWWHULHVꢀRIꢀGLIIHUHQWꢀ

types at the same time. Do not mix a new battery with used one.

• Make sure the plus and minus terminals are correctly aligned when loading a

battery.

• Keep a battery away from children and pets.

• Do not recharge, short circuit, solder or disassemble a battery.

‡ꢀ'RꢀQRWꢀDOORZꢀDꢀEDWWHU\ꢀLQꢀDꢀ¿UHꢀRUꢀZDWHUꢂꢀ.HHSꢀEDWWHULHVꢀLQꢀDꢀGDUNꢅꢀFRROꢀDQGꢀGU\ꢀ

place.

• Do not give the battery a physical impact.

‡ꢀ,Iꢀ\RXꢀREVHUYHꢀDꢀOHDNDJHꢀRIꢀDꢀEDWWHU\ꢅꢀZLSHꢀRXWꢀWKHꢀÀRZHUꢀDQGꢀWKHQꢀUHSODFHꢀ

DꢀEDWWHU\ꢂꢀ,IꢀWKHꢀÀRZHUꢀDGKHUHVꢀ\RXUꢀERG\ꢀRUꢀFORWKHVꢅꢀULQVHꢀZHOOꢀZLWKꢀZDWHUꢀ

immediately.

• Obey the local laws on disposing a battery.

To use the remote control, please load the batteries. Whenever the remote control

starts to malfunction, replace the batteries. If you won’t use the remote control for

an extended period, remove the batteries from the remote control and store them

in a safe place.

Remove the battery cover.

1. _{Slide back and remove the battery cover in the direction of the arrow.}

Take old batteries out and/or put new batteries in.

When putting in batteries, align and insert the two AA batteries according to

their plus and minus terminals as indicated in the remote control.

Close the battery cover.

Replace the battery cover in the direction of the arrow and snap it back into

place.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Preparations

Using the remote control

CAUTION ŹBe careful in handling the remote control. Incorrect handling

could cause damage or malfunction.

• Do not drop or otherwise expose the remote control to physical impact.

• Do not get the remote control wet or place it on wet objects.

• Remove the batteries from the remote control and store them in a safe place if

you won’t be using the remote control for an extended period.

• Replace the batteries whenever the remote control starts to malfunction.

• When strong lights such as direct sunlight or light from an extremely close

UDQJHꢀꢃVXFKꢀDVꢀIURPꢀDQꢀLQYHUWHUꢀÀXRUHVFHQWꢀODPSꢄꢀKLWꢀWKHꢀSURMHFWRU¶VꢀUHPRWHꢀ

sensor, the remote control may not function correctly. Adjust the direction of the

projector to keep light from directly hitting the projector’s remote sensor.

The remote control works with the projector’s remote sensor.

approx. 3 meters

30º

• The range of the remote sensor is 3 meters with a 60 degree range (30 degrees

to the left and right of the remote sensor).

‡ꢀ$OVRꢀDꢀUHPRWHꢀVLJQDOꢀUHÀHFWHGꢀLQꢀWKHꢀVFUHHQꢀHWFꢂꢀPD\ꢀEHꢀDYDLODEOHꢂꢀ,IꢀLWꢀLVꢀGLI¿FXOWꢀ

to send a remote signal to the sensor directly, please try.

• Since the remote control uses infrared light to send signals to the projector

(Class1 LED), be sure to use the remote control in an area free from obstacles

that could block the remote control’s output signal to the projector.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Preparations

$ERXWꢀWKHꢀÀOWHUꢀFRYHUꢀIRUꢀERWWRPꢁXSꢀXVH

WARNING Ź'RꢀQRWꢀUHSODFHꢀWKHꢀ¿OWHUꢀFRYHUꢀDQGꢆRUꢀDLUꢀ¿OWHUꢀGXULQJꢀXVHꢀRUꢀ

immediately after use. Handling while the projector is in a high temperature

could cause a burn and/or malfunction to the projector. Before operating, make

sure that the power switch is off, that the power cord is not plugged in, and that

the projector is cool adequately.

:KHQꢀWKHꢀSURMHFWRUꢀLVꢀLQVWDOOHGꢀERWWRPꢀXSꢅꢀSOHDVHꢀXVHꢀWKHꢀDFFHVVRU\ꢀ¿OWHUꢀFRYHUꢀ

IRUꢀERWWRPꢁXSꢀXVHꢂꢀ,WꢀLVꢀKLJKHUꢀWKDQꢀXVXDOꢀ¿OWHUꢀFRYHUꢅꢀWRꢀNHHSꢀWKHꢀVSDFHꢀIRUꢀLQWDNHꢀ

ventilation. Please change in the following procedure.

Disconnect all the connectors and adapters that were connected to the

1. _{SURMHFWRU¶VꢀSRUWVꢂꢀ7KHQꢀVORZO\ꢀWXUQꢀWKHꢀSURMHFWRUꢀVRꢀWKDWꢀWKHꢀOHQVꢁVLGHꢀLVꢀIDFLQJꢀ}

up. Please be careful for a projector not to fall. While the projector is placed

OHQVꢁVLGHꢀXSꢅꢀKROGꢀWKHꢀSURMHFWRUꢂ

2. ^{5HPRYHꢀWKHꢀ¿OWHUꢀFRYHUꢀDQGꢀWKHꢀDLUꢀ¿OWHUꢂꢀ+ROGꢀWKHꢀNQREVꢀZKLOHꢀSXOOLQJꢀRXWꢀLWꢂ}

Filter cover’s knob

$LUꢀ¿OWHU¶VꢀNQRE

Slowly turn the projector so that the bottom is facing up.

6HWꢀDꢀQHZꢀRUꢀFOHDQHGꢀDLUꢀ¿OWHUꢀWRꢀWKHꢀ¿OWHUꢀFRYHUꢀIRUꢀERWWRPꢁXSꢀXVHꢂꢀ0DNHꢀWKHꢀ

FODZVꢀVOLGHꢀDORQJꢀWKHꢀUDLOꢅꢀDQGꢀVHWꢀWKHꢀDLUꢀ¿OWHUꢀLQWRꢀSODFHꢂ

$LUꢀ¿OWHUꢀꢃ1HZꢀRUꢀFOHDQHGꢄ

Claws

5DLOꢀRIꢀDLUꢀ¿OWHU

)LOWHUꢀFRYHUꢀIRUꢀERWWRPꢁXSꢀXVH

5. ^{,QWHUORFNLQJꢀWKHꢀWDEVꢅꢀVQDSꢀWKHꢀ¿OWHUꢀFRYHUꢀIRUꢀERWWRPꢁXSꢀXVHꢀLQWRꢀSODFHꢂ}

Tabs

)LOWHUꢀFRYHUꢀIRUꢀERWWRPꢁXSꢀXVHꢀ

ꢃZLWKꢀDQꢀDLUꢀ¿OWHUꢄ

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up

WARNING ŹPlace the projector in a stable position horizontally. A fall or

a turnover could cause an injury and/or damage to the projector. Then using

GDPDJHGꢀSURMHFWRUꢀFRXOGꢀUHVXOWꢀLQꢀDꢀ¿UHꢀDQGꢆRUꢀDQꢀHOHFWULFꢀVKRFNꢂ

• Don’t place the projector on an unstable, slant or vibrant surface such as a

wobbly or inclined stand.

‡ꢀꢀ'RꢀQRWꢀSODFHꢀWKHꢀSURMHFWRUꢀLQꢀWKHꢀVLGHꢆIURQWꢆUHDUꢁXSꢀSRVLWLRQꢅꢀH[FHSWꢀFDUHꢀRIꢀWKHꢀ

DLUꢀ¿OWHUꢂꢀ

‡ꢀꢀ)RUꢀWKHꢀSURMHFWRUꢀLQVWDOOHGꢀERWWRPꢁXSꢅꢀXVHꢀWKHꢀDFFHVVRU\ꢀ¿OWHUꢀFRYHUꢀIRUꢀERWWRPꢁ

up use. And in the case of a ceiling installation or the like, contact your dealer

before installation.

Ź3ODFHꢀWKHꢀSURMHFWLRQꢀLQꢀDꢀFRROꢀSODFHꢅꢀDQGꢀSD\ꢀDWWHQWLRQꢀHQRXJKꢀWRꢀYHQWLODWLRQꢂꢀ

7KHꢀKLJKꢀWHPSHUDWXUHꢀRIꢀWKHꢀSURMHFWRUꢀFRXOGꢀFDXVHꢀDꢀ¿UHꢅꢀDꢀEXUQꢀDQGꢆRUꢀ

malfunction to the projector.

• Don’t stop up, block and cover the projector's vents.

• Keep a space of 30 cm or more between the sides and other objects such as

walls.

• Don’t place the projector on a metallic thing or anything weak in heat.

• Don’t place the projector on a carpet, cushion or bedding.

• Don’t place the projector in direct sunlight or near a hot object such as heater.

• Put nothing about lens and vents of the projector. Put nothing on the projector.

• Put nothing that is sucked or sticks to the bottom of projector. This projector

has some intake vents also on the bottom.

Ź'RꢀQRWꢀSODFHꢀWKHꢀSURMHFWRUꢀRQꢀWKHꢀSODFHꢀWKDWꢀJHWVꢀZHWꢂꢀ'DPSLQJꢀWKHꢀSURMHFWRUꢀ

RUꢀLQVHUWLQJꢀOLTXLGꢀLQꢀWKHꢀSURMHFWRUꢀFRXOGꢀFDXVHꢀDꢀ¿UHꢅꢀDQꢀHOHFWULFꢀVKRFNꢀDQGꢆRUꢀ

malfunction to the projector.

• Don’t place the projector in a bathroom or the outdoors.

• Put nothing containing the liquid near the projector.

CAUTION Ź$YRLGꢀDꢀVPRN\ꢅꢀKXPLGꢀRUꢀGXVW\ꢀSODFHꢂꢀ3ODFLQJꢀWKHꢀSURMHFWRUꢀ

LQꢀVXFKꢀSODFHꢀFRXOGꢀFDXVHꢀDꢀ¿UHꢅꢀDQꢀHOHFWULFꢀVKRFNꢀDQGꢆRUꢀPDOIXQFWLRQꢀWRꢀWKHꢀ

projector.

• 'RQ¶WꢀSODFHꢀWKHꢀSURMHFWRUꢀQHDUꢀDꢀKXPLGL¿HUꢅꢀDꢀVPRNLQJꢀVSDFHꢀRUꢀDꢀNLWFKHQꢂ

• Put nothing containing the liquid near the projector.

Ź$GMXVWꢀWKHꢀGLUHFWLRQꢀRIꢀWKHꢀSURMHFWRUꢀWRꢀNHHSꢀOLJKWꢀIURPꢀGLUHFWO\ꢀKLWWLQJꢀWKHꢀ

projector's remote sensor.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up

Arrangement

Refer to the illustrations and tables below

to determine the screen size and projection

distance.

(b)

The values shown in the table are calculated

( 3%) for a full size screen: 800x600

At 4:3 screen

down up

(a) Screen size

[inch (m)]

(b) Projection distance

[m (inch)]

4:3

(a)

(1.0)

(1.3)

(1.5)

(1.8)

(2.0)

(2.3)

(2.5)

(3.0)

(3.8)

(5.1)

(6.4)

(7.6)

1.5

1.9

2.3

2.7

3.1

3.4

3.8

4.6

5.8

7.7

9.6

11.6

(60)

(75)

8.7

(3)

(4)

(5)

(6)

(7)

(8)

(9)

52.3

65.3

78.4

91.4

104.5 (41)

117.6 (46)

130.6 (51)

(21)

(26)

(31)

(36)

10.9

13.1

15.2

17.4

19.6

21.8

26.1

32.7

43.5

54.4

65.3

100

120

150

200

250

300

(90)

(105)

(121)

(136)

(151)

(182)

(227)

(303)

(380)

(456)

(10) 156.8 (62)

(13) 195.9 (77)

(17) 261.3 (103)

(21) 326.6 (129)

(26) 391.9 (154)

At 16:9 screen

down up

(a) Screen size

[inch (m)]

(b) Projection distance

[m (inch)]

16:9

(a)

(1.0)

(1.3)

(1.5)

(1.8)

(2.0)

(2.3)

(2.5)

(3.0)

(3.8)

(5.1)

(6.4)

(7.6)

1.7

2.1

2.5

2.9

3.3

3.8

4.2

5.0

6.3

8.4

10.5

12.6

(65)

(82)

1.2

1.5

1.8

2.1

2.4

2.7

3.0

3.6

4.4

5.9

7.4

8.9

(0)

(1)

(2)

(3)

(4)

48.6

60.8

72.9

85.1

97.2

109.4 (43)

121.6 (48)

145.9 (57)

182.3 (72)

243.1 (96)

303.9 (120)

364.7 (144)

(19)

(24)

(29)

(34)

(38)

100

120

150

200

250

300

(98)

(115)

(131)

(148)

(165)

(198)

(248)

(331)

(414)

(497)

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up

Adjusting the projector's elevator

WARNING ŹDo not adjust the projector’s elevator during use or

immediately after use. Handling while the projector is in a high temperature

could cause a burn and/or malfunction to the projector. Before operating, make

sure that the power switch is off, that the power cord is not plugged in, and that

the projector is cool adequately.

CAUTION Ź,Iꢀ\RXꢀSUHVVꢀWKHꢀHOHYDWRUꢀEXWWRQꢀZLWKRXWꢀKROGLQJꢀWKHꢀSURMHFWRUꢅꢀ

WKHꢀSURMHFWRUꢀPLJKWꢀFUDVKꢀGRZQꢅꢀRYHUWXUQꢅꢀVPDVKꢀ\RXUꢀ¿QJHUVꢀDQGꢀSRVVLEO\ꢀ

result in malfunction. To prevent damaging the projector and injuring yourself,

always hold the projector whenever using the elevator buttons to adjust the

elevator feet.

Ź([FHSWꢀIRUꢀLQFOLQLQJꢀE\ꢀWKHꢀHOHYDWRUꢀIHHWꢀDGMXVWPHQWꢅꢀSODFHꢀWKHꢀSURMHFWRUꢀ

horizontally.

You can use the elevator feet to make adjustments if the surface on which you

need to set the projector is uneven or if you otherwise need to adjust the angle of

projection. The adjustment range of the elevator feet is 0 to 9 degrees.

Elevator button

Elevator feet

Press and hold in the elevator buttons while holding the projector.

1. _{The elevator buttons and the elevator feet are on the both sides.}

Raise or lower the projector to the desired height and then release the

elevator buttons.

When you release the elevator buttons, the elevator feet will lock into position.

$VꢀQHFHVVDU\ꢅꢀ\RXꢀFDQꢀDOVRꢀ¿QHO\ꢀDGMXVWꢀWKHꢀKHLJKWꢀRIꢀWKHꢀSURMHFWRUꢀE\ꢀWZLVWLQJꢀ

the elevator feet by hand.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up

Connecting your devices

CAUTION Ź7XUQꢀRIIꢀDOOꢀGHYLFHVꢀSULRUꢀWRꢀFRQQHFWLQJꢀWKHPꢀWRꢀWKHꢀSURMHFWRUꢂꢀ

Attempting to connect a live device to the projector may generate extremely

loud noises or other abnormalities that may result in malfunction and/or damage

to the device and/or projector.

Ź8VHꢀWKHꢀDFFHVVRU\ꢀFDEOHꢀRUꢀDꢀGHVLJQDWHGꢁW\SHꢀFDEOHꢀIRUꢀWKHꢀFRQQHFWLRQꢂꢀ

Some cables have to be used with core set. A too long cable may cause a

certain picture degradation. Please consult with your dealer for details. For

cables that have a core only at one end, connect the core to the projector.

Ź0DNHꢀVXUHꢀWKDWꢀ\RXꢀFRQQHFWꢀGHYLFHVꢀWRꢀWKHꢀFRUUHFWꢀSRUWꢂꢀ,QFRUUHFWꢀFRQQHFWLRQꢀ

may result in malfunction and/or damage to the device and/or projector.

NOTE • Whenever attempting to connect a laptop computer to the projector,

be sure to activate the laptop’s RGB external image output (set the laptop to CRT

display or to simultaneous LCD and CRT display). For details on how this is done,

please refer to the instruction manual of the corresponding laptop computer.

• Secure the screws on the connectors and tighten.

• Some computers may have multiple display screen modes. Use of some of

these modes will not be possible with this projector.

• For some RGB signal modes, the optional Mac adapter is necessary.

• When the image resolution is changed on a computer, depending on an input,

automatic adjust function may take some time and may not be completed. In

this case, you may not be able to see a check box to select “Yes/No” for the

new resolution on Windows. Then the resolution will go back to the original.

It might be recommended to use other CRT or LCD monitors to change the

resolution.

$ERXWꢀ3OXJꢁDQGꢁ3OD\ꢀFDSDELOLW\

3OXJꢁDQGꢁ3OD\ꢀLVꢀDꢀV\VWHPꢀFRPSRVHGꢀRIꢀWKHꢀFRPSXWHUꢅꢀLWVꢀRSHUDWLQJꢀV\VWHPꢀDQGꢀ

peripheral equipment (i.e. display devices). This projector is compatible with

9(6$ꢀ''&ꢀꢇ%ꢂꢀ3OXJꢁDQGꢁ3OD\ꢀFDQꢀEHꢀDFKLHYHGꢀE\ꢀFRQQHFWLQJꢀWKLVꢀSURMHFWRUꢀWRꢀ

computers that are VESA DDC (display data channel) compatible.

• Please take advantage of this function by connecting the accessory RGB

FDEOHꢀWRꢀWKHꢀ5*%ꢀSRUWꢀꢃ''&ꢀꢇ%ꢀFRPSDWLEOHꢄꢂꢀ3OXJꢁDQGꢁ3OD\ꢀPD\ꢀQRWꢀZRUNꢀ

properly if any other type of connection is attempted.

• Please use the standard drivers in your computer as this projector is a

3OXJꢁDQGꢁ3OD\ꢀPRQLWRUꢂ

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up

Examples of connection with a computer

Audio cable (stereo mini)

RGB cable

56ꢁꢇꢈꢇ&ꢀFDEOH

RGB

CONTROL

S-VIDEO

VIDEO

AUDIO

RGB out 56ꢁꢇꢈꢇ&

Audio out

Examples of connection with a VCR/DVD player

Audio cable (stereo mini)

Video cable

RGB

CONTROL

S-VIDEO

VIDEO

AUDIO

Audio out

Video out

Audio cable (stereo mini)

6ꢁ9LGHRꢀFDEOH

RGB

CONTROL

S-VIDEO

VIDEO

AUDIO

Audio out 6ꢁ9LGHRꢀRXW

Audio cable (stereo mini)

Component video cable

RGB

CONTROL

S-VIDEO

VIDEO

AUDIO

Audio out

Component video out

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up

Connecting power supply

WARNING ŹPlease use extra caution when connecting the power cord as

LQFRUUHFWꢀRUꢀIDXOW\ꢀFRQQHFWLRQVꢀPD\ꢀUHVXOWꢀLQꢀ¿UHꢀDQGꢆRUꢀHOHFWULFDOꢀVKRFNꢂ

• Only use the power cord that came with the projector. If it is damaged, contact

your dealer to newly get correct one.

• Only plug the power cord into an outlet rated for use with the power cord's

VSHFL¿HGꢀYROWDJHꢀUDQJHꢂ

• Never modify the power cord. Never attempt to defeat the ground connection

RIꢀWKHꢀWKUHHꢁSURQJHGꢀSOXJꢂ

Before connecting, make sure that the power switch is the OFF position (pressed

the side marked “O”).

Power switch

AC inlet

Connector of the power cord

Connect the connector of the power cord to the AC inlet of the projector.

2. ^{Firmly plug the power cord's plug into the outlet.}

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Power on/off

Turning on the power

WARNING ŹWhen the power is on, a strong light is emitted. Do not look

into the lens or vents of the projector.

NOTE • Turn the power on in right order. Please power on the projector before

the connected devices.

LAMP

STANDBY/ON

AUTO

VIDEO

RGB

TEMP

ASPECT

BLANK

POWER indicator

POWER

MAGNIFY

VOLUME

MUTE

INPUT

OFF

FREEZE

KEYSTONE

STANDBY/ON

button

ZOOM

POSITION

ENTER

ESC

RESET

Power switch

STANDBY/ON

0DNHꢀVXUHꢀWKDWꢀWKHꢀSRZHUꢀFRUGꢀLVꢀ¿UPO\ꢀDQGꢀFRUUHFWO\ꢀFRQQHFWHGꢀWRꢀWKHꢀ

projector and outlet.

Open the lens cover, and set the power switch to the ON position.

The power indicator will light to solid orange. Then wait several seconds

because buttons may not function for these several seconds.

POWER

(Solid orange)

Press the STANDBY/ON button on the projector or remote control.

The projector lamp will light up and the POWER indicator will begin blinking

green. When the power is completely on, the indicator will stop blinking and

light green.

POWER

(Blinking green)

POWER

(Solid green)

To display the picture, select an input signal according to the section "Selecting an

(

18)

input signal"

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Power on/off

Turning off the power

NOTE • Turn the power off in right order. Please power off the projector after the

connected devices.

•

Except for an emergency, whenever you turn the projector off, obey the procedure

of the following “Turning off the power”, and do not disconnect the power cord until the

SURFHGXUHꢀLVꢀFRPSOHWHGꢂꢀ1HJOHFWꢀFDXVHVꢀDꢀGDPDJHꢀRIꢀWKHꢀHOHFWURGHꢀDQGꢀXQꢁOLJKWLQJꢀRIꢀ

the lamp.

•

This Projector is controlled by an internal microprocessor. Under certain exceptional

circumstances, the projector may not operate correctly even for turning off the power. In

(

such a case, please push the restart switch

by using a pin or similar. After making

sure that the power indicator lights to solid orange, set the power switch to the OFF

position. Only push the restart switch in these exceptional instances.

•

When a power supply is shut off with a power failure or the restart switch, before

turning on again, make the projector cool down at least 10 minutes without operating.

Press the STANDBY/ON button on the projector or remote control.

The message "Power off?" will appear on the screen for approximately 5

seconds.

Power off?

Press the STANDBY/ON button on the projector or remote control again while the

message is visible.

The projector lamp will go off, and the POWER indicator will begin blinking orange.

Then the POWER indicator will stop blinking and light to solid orange when the

lamp cooling is complete.

POWER

(Blinking orange)

POWER

(Solid orange)

Make sure that the power indicator lights to solid orange, set the power switch

to the OFF position. The POWER indicator will go off.

Do not set the power switch to the OFF position while the POWER indicator is

green or blinking.

POWER

(Solid orange)

Close the lens cover. For safety purposes, disconnect the power cord if the

projector is not to be used for prolonged periods of time.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating

Adjusting the volume

STANDBY/ON

BLANK

VIDEO

RGB

AUTO

STANDBY/ON

BLANK

ASPECT

AUTO

VIDEO

RGB

MAGNIFY

VOLUME

MUTE

Press the VOLUME button on the remote control.

ASPECT

OFF

FREEZE

KEYSTONE

ZOOM

A dialog will appear on the screen to aid you in adjusting

the volume.

MAGNIFY

VOLUME

MUTE

POSITION

ENTER

ESC

RESET

2. ^{8VHꢀWKHꢀFXUVRUꢀEXWWRQVꢀŸꢆźꢀWRꢀDGMXVWꢀWKHꢀYROXPHꢂ}

To close the dialog and complete the operation, press the VOLUME button

again. Even if you don’t do anything, the dialog will automatically disappear

after a few seconds.

Temporarily muting the sound

STANDBY/ON

VIDEO

RGB

AUTO

Press the MUTE button on the remote control.

BLANK

ASPECT

AUTO

ASPECT

BLANK

MAGNIFY

VOLUME

MUTE

A dialog will appear on the screen indicating that you

MAGNIFY

VOLUME

MUTE

OFF

FREEZE

KEYSTONE

ZOOM

have muted the sound.

POSITION

OFF

ENTER

FREEZE

KEYSTONE

ESC

RESET

To restore the sound, press the MUTE button or

VOLUME button. Even if you don’t do anything, the

dialog will automatically disappear after a few seconds.

POWER

Selecting an input signal

INPUT

Press the INPUT button on the projector.

Each time you press the button, the projector switches

its input port as below.

RGB ꢀ6ꢁ9,'(2ꢀ VIDEO

ꢀ

Press the RGB button on the remote control to select

the RGB port.

STANDBY/ON

BLANK

VIDEO

RGB

AUTO

ASPECT

MAGNIFY

VOLUME

MUTE

STANDBY/ON

BLANK

AUTO

VIDEO

RGB

OFF

FREEZE

KEYSTONE

ZOOM

ASPECT

POSITION

ENTER

ESC

RESET

Press the VIDEO button on the remote control to select

an input port for video signal.

STANDBY/ON

BLANK

VIDEO

RGB

AUTO

ASPECT

MAGNIFY

VOLUME

MUTE

STANDBY/ON

BLANK

OFF

AUTO

VIDEO

RGB

Each time you press the button, the projector switches

FREEZE

KEYSTONE

ZOOM

ASPECT

POSITION

its video input port as below.

ENTER

ESC

RESET

6ꢁ9,'(2ꢀ VIDEO

Ɣꢀ,IꢀWKHꢀ9,'(2ꢀEXWWRQꢀLVꢀSXVKHGꢀꢃZKHQꢀVZLWFKLQJꢀIURPꢀ5*%ꢀWRꢀ9,'(2ꢀVLJQDOVꢄꢀ

when TURN ON is selected for the AUTO SEARCH item in the OPTION menu

(

38)

ꢀWKHꢀSURMHFWRUꢀZLOOꢀFKHFNꢀWKHꢀ6ꢁ9,'(2ꢀSRUWꢀ¿UVWꢂ If no input is detected at the

6ꢁ9,'(2ꢀSRUWꢅꢀSURMHFWRUꢀZLOOꢀFKHFNꢀWKHꢀ9,'(2ꢀSRUWꢀDXWRPDWLFDOO\ꢂ

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating

Searching an input signal

STANDBY/ON

BLANK

VIDEO

RGB

AUTO

ASPECT

Press the SEARCH button on the remote control.

MAGNIFY

VOLUME

MUTE

STANDBY/ON

OFF

AUTO

VIDEO

RGB

FREEZE

KEYSTONE

The projector will begin to check its input ports in order

WRꢀ¿QGꢀDQ\ꢀLQSXWꢀVLJQDOVꢂꢀ

ZOOM

BLANK

ASPECT

POSITION

ENTER

ESC

RESET

Then when an input is found, the projector will stop

searching and display the image. If no signal is found,

the projector will return to the state selected before the

operation.

RGB ꢀ6ꢁ9,'(2ꢀ VIDEO

Selecting an aspect ratio

Press the ASPECT button on the remote control.

Each time you press the button, the projector switches the modes for aspect

ratio in turn.

At a RGB signal

€

STANDBY/ON

VIDEO

RGB

ASPECT

AUTO

BLANK

NORMAL 4:3

16:9

STANDBY/ON

MAGNIFY

VOLUME

AUTO

VIDEO

RGB

MUTE

OFF

FREEZE

KEYSTONE

BLANK

VOLUME

ASPECT

ZOOM

POSITION

ENTER

At a video signal /no signal

4:3 16:9

€

ESC

RESET

Ɣꢀ7KHꢀ1250$/ꢀPRGHꢀNHHSVꢀWKHꢀRULJLQDOꢀDVSHFWꢀUDWLRꢀRIꢀWKHꢀVLJQDOꢂ

Ɣꢀ$WꢀDꢀ+'79ꢀFRPSRQHQWꢀYLGHRꢀVLJQDOꢀRIꢀꢊꢊꢇꢋLꢀꢃꢊꢌꢍꢌLꢄꢀRUꢀꢎꢋꢌSꢀꢃꢎꢇꢌSꢄꢅꢀRQO\ꢀꢊꢏꢐꢑꢀ

mode can be selected.

Ɣꢀ3HUIRUPLQJꢀWKHꢀDXWRPDWLFꢀDGMXVWPHQWꢀLQLWLDOL]HVꢀWKHꢀDVSHFWꢀUDWLRꢀVHWWLQJꢂ

MUTE

Adjusting the zoom (magnifying power)

STANDBY/ON

VIDEO

RGB

AUTO

OFF

ASPECT

BLANK

FREEZE

KEYSTONE

MAGNIFY

VOLUME

MUTE

3UHVVꢀWKHꢀ=220ꢀꢉꢆꢁꢀEXWWRQꢀRQꢀWKHꢀUHPRWHꢀFRQWUROꢂꢀ

OFF

ZOOM

FREEZE

KEYSTONE

ZOOM

A dialog will appear on the screen to aid you in

POSITION

ENTER

adjusting the zoom.

ESC

RESET

8VHꢀWKHꢀ=220ꢀEXWWRQVꢀꢉꢆꢁꢀWRꢀDGMXVWꢀWKHꢀ]RRPꢂ

To close the dialog and complete this operation, don’t

perform operation for a few seconds.

Adjusting the focus

1. ^{Use the focus ring to focus on the picture.}

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating

Using the automatic adjustment feature

1. ^{Press the AUTO button on the remote control.}

STANDBY/ON

BLANK

VIDEO

RGB

AUTO

STANDBY/ON

ASPECT

AUTO

VIDEO

RGB

MAGNIFY

VOLUME

MUTE

BLANK

VOLUME

ASPECT

OFF

FREEZE

KEYSTONE

ZOOM

MAGNIFY

POSITION

ENTER

ESC

RESET

At a RGB signal

€

The vertical position, the horizontal position, the horizontal phase,

the aspect and horizontal size will be automatically adjusted.

Make sure that the application window is set to its maximum size prior to

attempting to use this feature. A dark picture may still be incorrectly adjusted.

Use a bright picture when adjusting.

At a video signal

6ꢁ9,'(2ꢀÂꢀ9,'(2ꢐ

The video format best suited for the respective input signal, the vertical position,

the horizontal position phase and the aspect will be automatically adjusted.

COMPONENT:

The vertical position, the horizontal position, the clock phase and the aspect

will be automatically adjusted.

This function is available only when the AUTO mode is selected at the

(

32)

of this manual.

VIDEO FORMAT MENU. Refer to Page

)RUꢀDꢀFRPSRQHQWꢀYLGHRꢀVLJQDOꢅꢀWKHꢀVLJQDOꢀW\SHꢀLVꢀDXWRPDWLFDOO\ꢀLGHQWL¿HGꢅꢀ

regardless of this function.

Ɣꢀ7KHꢀDXWRPDWLFꢀDGMXVWPHQWꢀRSHUDWLRQꢀUHTXLUHVꢀDSSUR[LPDWHO\ꢀꢊꢌꢀVHFRQGVꢂꢀ$OVRꢀ

please note that it may not function correctly with some input.

STANDBY/ON

VIDEO

RGB

AUTO

Adjusting the position

ASPECT

BLANK

ZOOM

MAGNIFY

VOLUME

MUTE

Press the POSITION button on the remote control.

OFF

POSITION

FREEZE

KEYSTONE

ZOOM

The “POSITION” indication will appear on the screen.

POSITION

ENTER

ESC

RESET

8VHꢀWKHꢀFXUVRUꢀEXWWRQVꢀŸꢆźꢆŻꢆŹꢀWRꢀDGMXVWꢀWKHꢀSLFWXUHꢀSRVLWLRQꢂ

When you want to reset the operation, press the RESET

button on the remote control during the operation.

To complete this operation, press the POSITION button again. Even if you don’t

do anything, the dialog will automatically disappear after a few seconds.

Ɣꢀ:KHQꢀWKLVꢀIXQFWLRQꢀLVꢀSHUIRUPHGꢀDWꢀDꢀYLGHRꢀVLJQDOꢅꢀDꢀFHUWDLQꢀH[WUDꢀVXFKꢀDVꢀDꢀOLQHꢀ

may appear outside a picture.

Correcting the keystone distortions

STANDBY/ON

VIDEO

RGB

AUTO

ASPECT

BLANK

MAGNIFY

VOLUME

MUTE

Press the KEYSTONE button on the remote control.

A dialog will appear on the screen to aid you in correcting

MAGNIFY

VOLUME

MUTE

OFF

FREEZE

KEYSTONE

OFF

ZOOM

POSITION

FREEZE

KEYSTONE

the distortion.

ENTER

ESC

RESET

ZOOM

8VHꢀWKHꢀFXUVRUꢀEXWWRQVꢀŸꢆźꢀWRꢀFRUUHFWꢀWKHꢀGLVWRUWLRQꢂ

To close the dialog and complete this operation, press

the KEYSTONE button again. Even if you don’t do anything, the dialog will

automatically disappear after a few seconds.

Ɣꢀ7KLVꢀIXQFWLRQꢀPD\ꢀQRWꢀEHꢀZRUNꢀZHOOꢀZLWKꢀVRPHꢀLQSXWꢂ

Ɣꢀ7KHꢀDGMXVWDEOHꢀUDQJHꢀIRUꢀFRUUHFWLQJꢀZLOOꢀYDU\ꢀDPRQJꢀLQSXWVꢂ

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating

STANDBY/ON

BLANK

ASPECT

AUTO

Using the partial magnify feature

VIDEO

RGB

AUTO

ASPECT

MAGNIFY

VOLUME

MUTE

MAGNIFY

VOLUME

MUTE

Press the ON button of MAGNIFY on the remote control.

OFF

FREEZE

KEYSTONE

ZOOM

OFF

The “MAGNIFY” indication will appear on the screen

POSITION

ENTER

ESC

RESET

(although the indication will disappear after several

seconds with no operation.), and the projector will enter the

MAGNIFY mode.

2. ^{8VHꢀWKHꢀFXUVRUꢀEXWWRQVꢀŸꢆźꢀWRꢀDGMXVWꢀWKHꢀ]RRPꢀOHYHOꢂꢀ}

To move the zoom area, press the POSITION button in the MAGNIFY mode,

WKHQꢀXVHꢀWKHꢀFXUVRUꢀEXWWRQVꢀŸꢆźꢆŻꢆŹꢂꢀ$QGꢀWRꢀ¿QDOL]HꢀWKHꢀ]RRPꢀDUHDꢅꢀSUHVVꢀ

the POSITION button again.

To exit the MAGNIFY mode and restore the screen to normal, press the OFF

button of MAGNIFY on the remote control.

Ɣꢀ7KHꢀSURMHFWRUꢀDXWRPDWLFDOO\ꢀH[LWVꢀWKHꢀ0$*1,)<ꢀPRGHꢀZKHQꢀWKHꢀLQSXWꢀVLJQDOꢀ

changes, or when an operation of changing the display condition (automatic

adjustment, etc.) is executed.

Ɣꢀ$OWKRXJKꢀWKHꢀNH\VWRQHꢀGLVWRUWLRQꢀFRQGLWLRQꢀPD\ꢀYDU\ꢀLQꢀWKHꢀ0$*1,)<ꢀPRGHꢅꢀLWꢀ

will be restored when the projector exit the MAGNIFY mode.

Freezing the screen

STANDBY/ON

MAGNIFY

VOLUME

MUTE

VIDEO

RGB

AUTO

ASPECT

BLANK

MAGNIFY

VOLUME

MUTE

Press the FREEZE button on the remote control.

OFF

FREEZE

KEYSTONE

FREEZE

KEYSTONE

ZOOM

The “FREEZE” indication will appear on the screen, and

POSITION

ZOOM

ENTER

the projector will enter the FREEZE mode.

ESC

RESET

To exit the FREEZE mode and restore the screen to normal,

press the FREEZE button again.

Ɣꢀ7KHꢀSURMHFWRUꢀDXWRPDWLFDOO\ꢀH[LWVꢀWKHꢀ)5((=(ꢀPRGHꢀZKHQꢀWKHꢀLQSXWꢀVLJQDOꢀ

changes, or when one of the projector’s buttons or the remote control buttons

of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, ASPECT, VOLUME,

MUTE, KEYSTONE, POSITION and MENU is pressed.

Ɣꢀ,IꢀWKHꢀSURMHFWRUꢀFRQWLQXHVꢀSURMHFWLQJꢀDꢀVWLOOꢀLPDJHꢀIRUꢀORQJꢀWLPHꢅꢀWKHꢀ/&'ꢀSDQHOꢀ

might possibly be printed. Do not leave the projector in FREEZE mode for too

long.

STANDBY/ON

Temporarily blanking the screen

AUTO

VIDEO

RGB

ASPECT

BLANK

MAGNIFY

VOLUME

MUTE

STANDBY/ON

Press the BLANK button on the remote control.

OFF

AUTO

VIDEO

RGB

FREEZE

KEYSTONE

ZOOM

BLANK

VOLUME

ASPECT

The blank screen will be displayed instead of the screen

POSITION

ENTER

ESC

RESET

MAGNIFY

of input signal. Please refer to the item BLANK of section

(

35).

SCREEN menu

To remove the blank screen and return to the input signal screen, press the

BLANK button again.

Ɣꢀ7KHꢀSURMHFWRUꢀDXWRPDWLFDOO\ꢀUHWXUQVꢀWRꢀWKHꢀLQSXWꢀVLJQDOꢀVFUHHQꢀZKHQꢀWKHꢀLQSXWꢀ

signal changes, or when one of the projector’s buttons or the remote control

buttons are pressed.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Multifunctional settings

NOTE • Regardless of description of this manual, these functions may not work

correctly with some input.

Using the menu function

This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP,

SCREEN, OPTION and EASY MENU. Each of these menus is operated using the

same methods. The basic operations of these menus are as follows.

STANDBY/ON

MENU button

AUTO

VIDEO

RGB

ASPECT

BLANK

POSITION

VOLUME

MUTE

Cursor buttons

MAGNIFY

OFF

ŸꢆźꢆŻꢆŹ

FREEZE

KEYSTONE

ZOOM

ENTER

POSITION

ENTER button

RESET button

ESC button

ENTER

RESET

ESC

RESET

STANDBY/ON

To display a menu

Press the MENU button on the remote control or one of the cursor buttons

ŸꢆźꢆŻꢆŹꢀRQꢀWKHꢀSURMHFWRUꢂꢀ7KHꢀ$GYDQFHGꢀ0(18ꢀRUꢀ($6<ꢀ0(18ꢀZLOOꢀDSSHDUꢂ

To choose the target menu

3RLQWꢀDWꢀRQHꢀRIꢀFKRLFHVꢀRQꢀWKHꢀPHQXꢀXVLQJꢀWKHꢀFXUVRUꢀEXWWRQVꢀŸꢆźꢅꢀWKHQꢀ

SUHVVꢀWKHꢀFXUVRUꢀEXWWRQꢀŹꢀRUꢀWKHꢀ(17(5ꢀEXWWRQꢂ

At the Advance menu, when some menu is chosen already and you want to

choose other menu, please return to the main menu beforehand, using the

FXUVRUꢀEXWWRQꢀŻꢀRUꢀWKHꢀ(6&ꢀEXWWRQꢀEHIRUHꢀFKRRVLQJꢀWKHꢀPHQXꢂ

ꢃꢊꢄꢀ($6<ꢀ0(18ꢀĺꢀ$GYDQFHꢀ0(18

EASY MENU

ASPECT

ZOOM

KEYSTONE

MODE

BRIGHT

CONTRAST

COLOR

4:3

ASPECT

ZOOM

KEYSTONE

MODE

BRIGHT

CONTRAST

COLOR

4:3

[

]

:SELECT

MENU RGB

NORMAL

PICTURE

IMAGE

INPUT

SETUP

SCREEN

OPTION

BRIGHT

CONTRAST

GAMMA

COLOR TEMP

COLOR

TINT

NORMAL

DEFAULT 1

HIGH

ENTER

Źꢀꢆꢀ

TINT

EASY MENU

SHARPNESS

SHRPNESS

WHISPER

MIRROR

RESET

SHRPNESS

WHISPER

MIRROR

RESET

PROGRESSIVE TURN OFF

MY MEMORY SAVE 1

NORMAL

FILTER TIME

LANGUAGE

FILTER TIME

LANGUAGE

Advanced MENU

ENGLISH

Go To Advance Menu...

EASY MENU

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Multifunctional settings

(2) 3,&785(ꢀRIꢀ$GYDQFHGꢀ0(18ꢀĺꢀRQHꢀRIꢀ$GYDQFHGꢀ0HQXVꢀꢃH[ꢂꢀ6(783ꢀPHQXꢄ

[

]

:SELECT

[

]

[

]

MENU RGB

:SELECT

MENU RGB

PICTURE

IMAGE

INPUT

SETUP

SCREEN

OPTION

BRIGHT

CONTRAST

GAMMA

COLOR TEMP

COLOR

TINT

PICTURE

IMAGE

INPUT

SETUP

SCREEN

OPTION

ZOOM

100

NORMAL

PICTURE

IMAGE

INPUT

SETUP

SCREEN

OPTION

ZOOM

100

NORMAL

DEFAULT 1

HIGH

KEYSTONE

WHISPER

MIRROR

VOLUME

KEYSTONE

WHISPER

MIRROR

VOLUME

ENTER

Źꢀꢆꢀ

EASY MENU

SHARPNESS

EASY MENU

PROGRESSIVE TURN OFF

MY MEMORY SAVE 1

Advanced MENU

(PICTURE)

Advanced MENU

(SETUP)

SETUP menu of

Advanced MENU

EASY MENU

ꢃꢈꢄꢀ$GYDQFHGꢀ0HQXꢀĺꢀ($6<ꢀ0(18

ASPECT

ZOOM

4:3

[

]

[

]

:SELECT

MENU RGB

KEYSTONE

MODE

BRIGHT

CONTRAST

COLOR

TINT

SHRPNESS

WHISPER

MIRROR

RESET

FILTER TIME

LANGUAGE

PICTURE

IMAGE

INPUT

SETUP

SCREEN

OPTION

BRIGHT

CONTRAST

GAMMA

COLOR TEMP

COLOR

TINT

SHARPNESS

PROGRESSIVE TURN OFF

MY MEMORY SAVE 1

PICTURE

IMAGE

INPUT

SETUP

SCREEN

OPTION

Go To Easy Menu...

NORMAL

DEFAULT 1

HIGH

ENTER

Źꢀꢆꢀ

EASY MENU

NORMAL

Advanced MENU

(PICTURE)

Advanced MENU

(EASY MENU)

ENGLISH

Go To Advance Menu...

EASY MENU

To choose the target item

3RLQWꢀDWꢀRQHꢀRIꢀFKRLFHVꢀRQꢀWKHꢀPHQXꢀXVLQJꢀWKHꢀFXUVRUꢀEXWWRQVꢀŸꢆźꢂꢀ$WꢀDQꢀ

$GYDQFHGꢀPHQXꢅꢀWKHQꢀSUHVVꢀWKHꢀFXUVRUꢀEXWWRQꢀŹꢀRUꢀWKHꢀ(17(5ꢀEXWWRQꢂ

(1) At EASY MENU (ex. KEYSTONE)

EASY MENU

ASPECT

ZOOM

KEYSTONE

MODE

BRIGHT

CONTRAST

COLOR

4:3

ASPECT

ZOOM

KEYSTONE

MODE

BRIGHT

CONTRAST

COLOR

4:3

NORMAL

TINT

SHRPNESS

WHISPER

MIRROR

RESET

SHRPNESS

WHISPER

MIRROR

RESET

NORMAL

FILTER TIME

LANGUAGE

FILTER TIME

LANGUAGE

ENGLISH

Go To Advance Menu...

ASPECT is chosen

KEYSTONE is chosen

(2) At Advanced Menu (ex. KEYSTONE)

[

]

:SELECT

MENU RGB

[

]

:SELECT

MENU RGB

PICTURE

IMAGE

INPUT

SETUP

SCREEN

OPTION

ZOOM

100

NORMAL

PICTURE

IMAGE

INPUT

SETUP

SCREEN

OPTION

ZOOM

100

NORMAL

KEYSTONE

WHISPER

MIRROR

VOLUME

KEYSTONE

WHISPER

MIRROR

VOLUME

ENTER

Źꢀꢆꢀ

EASY MENU

KEYSTONE

KEYSTONE is chosen

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Multifunctional settings

To operate

Please follow of the mention concerned in each. In general,

ꢃꢊꢄꢀ$Wꢀ($6<ꢀ0(18ꢅꢀXVHꢀWKHꢀFXUVRUꢀEXWWRQVꢀŻꢆŹꢀWRꢀRSHUDWHꢂ

ꢃꢇꢄꢀ$Wꢀ$GYDQFHGꢀ0(18ꢅꢀXVHꢀWKHꢀFXUVRUꢀEXWWRQVꢀŸꢆźꢂꢀ

To return to the previous menu

3UHVVꢀWKHꢀFXUVRUꢀEXWWRQꢀŻꢀRUꢀWKHꢀ(6&ꢀEXWWRQꢂ

ꢃꢊꢄꢀ2QHꢀRIꢀ$GYDQFHGꢀ0HQXVꢀꢃH[ꢂꢀ6(783ꢀPHQXꢄꢀĺꢀ0DLQꢀRIꢀ$GYDQFHGꢀ0(18

[

]

:SELECT

MENU RGB

[

]

:SELECT

MENU RGB

PICTURE

IMAGE

INPUT

SETUP

SCREEN

OPTION

ZOOM

100

NORMAL

PICTURE

IMAGE

INPUT

SETUP

SCREEN

OPTION

ZOOM

100

NORMAL

KEYSTONE

WHISPER

MIRROR

VOLUME

KEYSTONE

WHISPER

MIRROR

VOLUME

ESC

Żꢀꢆꢀ

EASY MENU

Main of Advanced

SETUP MENU of

Advanced MENU

ꢃꢇꢄꢀ'LDORJVꢀIRUꢀRSHUDWLRQꢀꢃH[ꢂꢀ.(<6721(ꢄꢀĺꢀ$GYDQFHGꢀ0(18

[

]

:SELECT

MENU RGB

PICTURE

IMAGE

INPUT

SETUP

SCREEN

OPTION

ZOOM

100

NORMAL

KEYSTONE

WHISPER

MIRROR

VOLUME

ESC

Żꢀꢆꢀ

EASY MENU

KEYSTONE

Dialog for KEYSTONE

SETUP menu

6. ^{To reset}

(1) Each item

Press the RESET button while operating.

(2) Items of EASY MENU (at a time)

3RLQWꢀDWꢀ³5(6(7´ꢀRQꢀWKHꢀPHQXꢀXVLQJꢀWKHꢀFXUVRUꢀEXWWRQVꢀŸꢆźꢅꢀWKHQꢀSUHVVꢀ

WKHꢀFXUVRUꢀEXWWRQꢀŹꢀRUꢀWKHꢀ(17(5ꢀEXWWRQꢂꢀ7KHꢀGLDORJꢀIRUꢀUHVHWꢀZLOOꢀDSSHDUꢂ

3RLQWꢀDWꢀ³5(6(7´ꢀRQꢀWKHꢀGLDORJꢀXVLQJꢀWKHꢀFXUVRUꢀEXWWRQꢀŸꢂ

PICTURE

(3) Items of an Advanced MENU

RESET

CANCEL

Press the RESET button while pointing the menu name.

The dialog for reset will appear.

3RLQWꢀDWꢀ³5(6(7´ꢀRQꢀWKHꢀGLDORJꢀXVLQJꢀWKHꢀFXUVRUꢀEXWWRQꢀŸꢂ

Note that items whose functions are performed simultaneously with operation

(ex. LANGUAGE, H PHASE etc.) aren’t reset.

To close the menu

Press the MENU button again.

Even if you don't do anything, the operation will complete and the menu will

disappear automatically after about 10 seconds.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Multifunctional settings

EASY MENU

ASPECT

ZOOM

KEYSTONE

MODE

4:3

With the EASY MENU, items shown in the table below can

be performed.

NORMAL

BRIGHT

&KRRVHꢀDQꢀLWHPꢀXVLQJꢀWKHꢀFXUVRUꢀEXWWRQVꢀŸꢆźꢀRQꢀWKHꢀ

projector or remote control. Then perform it referring to the

following table.

CONTRAST

COLOR

TINT

SHRPNESS

WHISPER

MIRROR

RESET

NORMAL

FILTER TIME

LANGUAGE

ENGLISH

Go To Advance Menu...

Item

Description

8VLQJꢀWKHꢀEXWWRQVꢀŻꢆŹꢀVZLWFKHVꢀWKHꢀPRGHꢀIRUꢀDVSHFWꢀUDWLRꢂꢀ

See the item ASPECT of section IMAGE menu. ( 30, 19)

ASPECT

8VLQJꢀWKHꢀEXWWRQVꢀŻꢆŹꢀDGMXVWVꢀWKHꢀ]RRPꢂ

See the item ZOOM of section SETUP menu. ( 34, 19)

ZOOM

8VLQJꢀWKHꢀEXWWRQVꢀŻꢆŹꢀFRUUHFWVꢀWKHꢀNH\VWRQHꢀGLVWRUWLRQꢂ

See the item KEYSTONE of section SETUP menu. ( 34, 20)

KEYSTONE

8VLQJꢀWKHꢀEXWWRQVꢀŻꢆŹꢀVZLWFKHVꢀWKHꢀPRGHꢀRIꢀSLFWXUHꢀW\SHꢂꢀ7KHꢀ

modes of picture type are combinations of a mode of GAMMA

(

27) and a mode of COLOR TEMP ( 28). Choose a suitable

mode according to the projected source.

NORMAL CINEMA DYNAMIC

MODE

NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)

CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT)

DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT)

• When the combination of GAMMA and COLOR TEMP differs from

SUHꢁDVVLJQHGꢀPRGHVꢀDERYHꢅꢀWKHꢀGLVSOD\ꢀRQꢀWKHꢀPHQXꢀIRUꢀWKHꢀ02'(ꢀ

is “CUSTOM”.

8VLQJꢀWKHꢀEXWWRQVꢀŻꢆŹꢀDGMXVWVꢀWKHꢀEULJKWQHVVꢂ

See the item BRIGHT of section PICTURE menu. ( 27)

BRIGHT

8VLQJꢀWKHꢀEXWWRQVꢀŻꢆŹꢀDGMXVWVꢀWKHꢀFRQWUDVWꢂ

See the item CONTRAST of section PICTURE menu. ( 27)

CONTRAST

8VLQJꢀWKHꢀEXWWRQVꢀŻꢆŹꢀDGMXVWVꢀWKHꢀVWUHQJWKꢀRIꢀZKROHꢀFRORUꢂ

See the item COLOR of section PICTURE menu. ( 28)

• This item can be chosen only at a video signal.

COLOR

TINT

8VLQJꢀWKHꢀEXWWRQVꢀŻꢆŹꢀDGMXVWVꢀWKHꢀWLQWꢂ

See the item TINT of section PICTURE menu. ( 28)

• This item can be chosen only at a video signal.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Multifunctional settings

EASY MENU (continued)

Item

Description

8VLQJꢀWKHꢀEXWWRQVꢀŻꢆŹꢀDGMXVWVꢀWKHꢀVKDUSQHVVꢂ

SHARPNESS

WHISPER

MIRROR

See the item SHARPNESS of section PICTURE menu. ( 28)

8VLQJꢀWKHꢀEXWWRQVꢀŻꢆŹꢀWXUQVꢀRIIꢆRQꢀWKHꢀZKLVSHUꢀPRGHꢂ

See the item WHISPER of section SETUP menu. ( 34)

8VLQJꢀWKHꢀEXWWRQVꢀŻꢆŹꢀVZLWFKHVꢀWKHꢀPRGHꢀIRUꢀPLUURUꢀVWDWXVꢂ

See the item MIRROR of section SETUP menu. ( 34)

Performing this item resets all of the items of EASY MENU except

FILTER TIME and LANGUAGE.

3UHVVLQJꢀWKHꢀEXWWRQꢀŹꢀGLVSOD\VꢀDꢀGLDORJꢀWRꢀPDNHꢀVXUHꢂꢀ7RꢀSHUIRUPꢀ

UHVHWꢅꢀSRLQWꢀDWꢀ5(6(7ꢀXVLQJꢀWKHꢀEXWWRQꢀŸꢂ ( 24)

RESET

3HUIRUPLQJꢀWKLVꢀLWHPꢀUHVHWVꢀWKHꢀ¿OWHUꢀWLPHUꢀZKLFKꢀFRXQWVꢀXVHꢀWLPHꢀRIꢀ

DLUꢀ¿OWHUꢂ

FILTER TIME

LANGUAGE

See the item FILTER TIME of section OPTION menu. ( 39)

8VLQJꢀWKHꢀEXWWRQVꢀŻꢆŹꢀVZLWFKHVꢀWKHꢀODQJXDJHꢀRIꢀPHQXꢂꢀ

See the item LANGUAGE of section SCREEN menu. ( 35)

3RLQWLQJꢀDWꢀWKHꢀ³*Rꢀ7Rꢀ$GYDQFHGꢀ0HQX´ꢀDQGꢀSUHVVLQJꢀWKHꢀEXWWRQꢀŹꢀ

changes the EASY MENU into the Advanced MENU. ( 22)

Performs to use the menu of PICTURE, IMAGE, INPUT, SETUP,

SCREEN or OPTION.

Go To

Advanced Menu

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Multifunctional settings

PICTURE menu

[

]

:SELECT

MENU RGB

With the PICTURE menu, items shown in the table below

can be performed.

&KRRVHꢀDQꢀLWHPꢀXVLQJꢀWKHꢀFXUVRUꢀEXWWRQVꢀŸꢆźꢀRQꢀWKHꢀ

SURMHFWRUꢀRUꢀUHPRWHꢀFRQWUROꢅꢀDQGꢀSUHVVꢀWKHꢀFXUVRUꢀEXWWRQꢀŹꢀ

on the projector or remote control, or the ENTER button on

the remote control to progress. Then perform it referring to

the following table.

PICTURE

IMAGE

INPUT

SETUP

SCREEN

OPTION

BRIGHT

CONTRAST

GAMMA

COLOR TEMP

COLOR

TINT

DEFAULT 1

HIGH

EASY MENU

SHARPNESS

PROGRESSIVE TURN OFF

MY MEMORY SAVE 1

Item

Description

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀDGMXVWVꢀWKHꢀEULJKWQHVVꢂꢀꢐꢀꢀꢀꢀ/LJKWꢀ Dark

BRIGHT

CONTRAST

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀDGMXVWVꢀWKHꢀFRQWUDVWꢂꢀꢐꢀꢀꢀꢀ6WURQJꢀ Weak

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀVZLWFKHVꢀWKHꢀ*$00$ꢀPRGHꢂ

GAMMA

DEFAULT

#1 DEFAULT

#1 CUSTOM

#2 DEFAULT

CUSTOM

DEFAULT

CUSTOM

DEFAULT

CUSTOM

#3 CUSTOM

#3 DEFAULT

#2 CUSTOM

To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM

Selecting a mode of CUSTOM and then

ENTER :

SUHVVLQJꢀWKHꢀEXWWRQꢀŹꢀRUꢀWKHꢀ(17(5ꢀEXWWRQꢀ

displays a dialog to aid you in adjusting the

mode.

This function is useful when you want to

change the brightness of particular tones.

&KRRVHꢀDQꢀLWHPꢀXVLQJꢀWKHꢀEXWWRQVꢀŻꢆŹꢅꢀDQGꢀ

DGMXVWꢀWKHꢀOHYHOꢀXVLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢂ

+0 +0 +0 +0 +0 +0 +0 +0

[

]

GAMMA CUSTOM 1

GAMMA

Using a test pattern

You can display a test pattern for checking the effect of your

adjustment by pressing the ENTER button.

Each time you press the ENTER button, the pattern changes as

below.

No pattern Gray scale of 9 steps

Ramp Gray scale of 15 steps

Eight of equalizing bars corresponds to eight of tone level of test

pattern except the darkest in the left end. If you want to adjust

the 2nd tone from left end on the test pattern, use the equalizing

adjustment bar “1”. The darkest tone at the left end of the test

pattern cannot be controlled with any of equalizing adjustment bar.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Multifunctional settings

PICTURE menu (continued)

Item

Description

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀVZLWFKHVꢀWKHꢀ

[

]

COLOR TEMP RGB

:SELECT

GAIN

mode of color temperature.

OFFSET

HIGH

MIDDLE

LOW

HIGH

MIDDLE

CUSTOM

LOW

+0 +0 +0

OFFSET

+0 +0 +0

To adjust CUSTOM

ENTER :

Selecting the CUSTOM and then pressing the

EXWWRQꢀŹꢀRUꢀWKHꢀ(17(5ꢀEXWWRQꢀdisplays a dialog

to aid you in adjusting the OFFSET and/or GAIN

of CUSTOM mode.

GAIN

OFFSET adjustments change the color intensity

on the whole tones of the test pattern.

+0 +0 +0

COLOR TEMP

GAIN adjustments mainly affect color intensity

on the brighter tones of the test pattern.

&KRRVHꢀDQꢀLWHPꢀXVLQJꢀWKHꢀEXWWRQVꢀŻꢆŹꢅꢀDQGꢀDGMXVWꢀWKHꢀOHYHOꢀXVLQJꢀ

WKHꢀEXWWRQVꢀŸꢆźꢂ

Using a test pattern

You can display a test pattern for checking the effect of your

adjustment by pressing the ENTER button.

Each time you press the ENTER button, the pattern changes as

below.

No pattern Gray scale of 9 steps

Ramp Gray scale of 15 steps

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀDGMXVWVꢀWKHꢀVWUHQJWKꢀRIꢀZKROHꢀFRORUꢂ

COLOR

Strong

Weak

• This item can be chosen only at a video signal.

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀDGMXVWVꢀWKHꢀWLQWꢂ

TINT

Green

Red

• This item can be chosen only at a video signal.

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀDGMXVWVꢀWKHꢀVKDUSQHVVꢂ

SHARPNESS

Strong

Weak

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Multifunctional settings

PICTURE menu (continued)

Item

Description

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀVZLWFKHVꢀWKHꢀSURJUHVVLYHꢀPRGHꢂ

TV FILM TURN OFF

• This function performs only at an interlaced signal of a VIDEO

LQSXWꢅꢀDꢀ6ꢁ9,'(2ꢀLQSXWꢀRUꢀDꢀFRPSRQHQWꢀYLGHRꢀLQSXWꢀRIꢀꢋꢇꢋLꢀꢃꢒꢍꢌLꢄꢀRUꢀ

625i (576i) signal.

• When the TV or FILM is selected, the screen image will be crisper.

7KHꢀ),/0ꢀPRGHꢀLVꢀDGDSWDEOHꢀWRꢀWKHꢀꢇꢁꢈꢀ3XOOꢁ'RZQꢀV\VWHPꢀWRꢀWKHꢀ

FRQYHUVLRQꢂꢀꢃQRWꢀDGDSWDEOHꢀWRꢀWKHꢀꢇꢁꢇꢀ3XOOꢁ'RZQꢀV\VWHPꢄꢀ%XWꢀWKHVHꢀ

may cause a certain defect (for example, jagged line) of the picture

at a quick moving object. In such a case, please select the TURN

OFF, even though the screen image may lose the crisp.

PROGRESSIVE

&KRRVLQJꢀDꢀPRGHꢀRIꢀ0<ꢀ0(025<ꢀXVLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀDQGꢀWKHQꢀ

SUHVVLQJꢀWKHꢀEXWWRQꢀŹꢀRUꢀWKHꢀ(17(5ꢀEXWWRQꢀSHUIRUPVꢀHDFKꢀIXQFWLRQꢂ

LOAD1

LOAD2

LOAD3

LOAD4

SAVE4 SAVE3

SAVE2

SAVE1

This projector has 4 numbered memories for adjustment data.

Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on

the memory whose number corresponds with the command’s number,

and adjusts the picture automatically depending on the data.

Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current

adjustment data on the memory whose number corresponds with

the command’s number.

MY MEMORY

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Multifunctional settings

IMAGE menu

[

]

:SELECT

MENU RGB

With the IMAGE menu, items shown in the table below can

be performed.

&KRRVHꢀDQꢀLWHPꢀXVLQJꢀWKHꢀFXUVRUꢀEXWWRQVꢀŸꢆźꢀRQꢀWKHꢀ

SURMHFWRUꢀRUꢀUHPRWHꢀFRQWUROꢅꢀDQGꢀSUHVVꢀWKHꢀFXUVRUꢀEXWWRQꢀŹꢀ

on the projector or remote control, or the ENTER button on

the remote control to progress. Then perform it referring to

the following table.

PICTURE

IMAGE

INPUT

SETUP

SCREEN

OPTION

ASPECT

4:3

142

OVER SCAN

V POSITION

H POSITION

H PHASE

H SIZE

1344

EASY MENU

AUTO ADJUST EXECUTE

Item

Description

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀVZLWFKHVꢀWKHꢀPRGHꢀIRUꢀDVSHFWꢀUDWLRꢂ

At a RGB signal

4:3

16:9

NORMAL

At a video signal / no signal

4:3 16:9

ASPECT

• The NORMAL mode keeps the original aspect ratio of the signal.

• At a HDTV component video signal of 1125i (1080i) or 750p (720p),

this item can’t be chosen.

• Performing the automatic adjustment initializes the aspect ratio

setting.

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀDGMXVWVꢀWKHꢀRYHUꢁVFDQꢀUDWLRꢂ

Large (It reduces picture) ꢀ6PDOOꢀꢃ,WꢀPDJQL¿HVꢀSLFWXUHꢄ

• This item can be chosen only at a video signal.

OVER SCAN

• When this adjustment is too large, certain degradation may appear

at the frame area of the picture. In such a case, please adjust small.

• The number displayed on the menu during this adjustment is just

for your reference , and might not be exact display ratio.

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀDGMXVWVꢀWKHꢀYHUWLFDOꢀSRVLWLRQꢂ

V POSITION

H POSITION

Down

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀDGMXVWVꢀWKHꢀKRUL]RQWDOꢀSRVLWLRQꢂ

Left Right

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀDGMXVWVꢀWKHꢀKRUL]RQWDOꢀSKDVHꢀWRꢀHOLPLQDWHꢀ

ÀLFNHUꢂ

H PHASE

Right

Left

• This item can be chosen only at a RGB signal or a component

video signal.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Multifunctional settings

IMAGE menu (continued)

Item

Description

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀDGMXVWVꢀWKHꢀKRUL]RQWDOꢀVL]Hꢂ

Large Small

• This item can be chosen only at a RGB signal.

H SIZE

• When this adjustment is excessive, the picture may not be

displayed correctly. In such a case, please reset the adjustment

pressing the RESET button during this operation.

Choosing this item performs the automatic adjustment feature.

At a RGB signal

€

The vertical position, the horizontal position, the horizontal phase, the

aspect and horizontal size will be automatically adjusted.

Make sure that the application window is set to its maximum size

prior to attempting to use this feature. A dark picture may still be

incorrectly adjusted. Use a bright picture when adjusting.

At a video signal

€

6ꢁ9,'(2ꢀÂꢀ9,'(2ꢐ

The video format best suited for the respective input signal, the

vertical position, the horizontal position phase and the aspect will be

automatically adjusted.

AUTO ADJUST

EXECUTE

COMPONENT:

The vertical position, the horizontal position, the clock phase and

the aspect will be automatically adjusted.

This function is available only when the AUTO mode is selected at

the VIDEO FORMAT MENU. Refer to Page( 32) of this manual.

For a component video signal, the signal type is automatically

LGHQWL¿HGꢅꢀUHJDUGOHVVꢀRIꢀWKLVꢀIXQFWLRQꢂ

• The automatic adjustment operation requires approximately 10

seconds. Also please note that it may not function correctly with

some input.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Multifunctional settings

INPUT menu

[

]

:SELECT

MENU RGB

With the INPUT menu, items shown in the table below can

be performed.

&KRRVHꢀDQꢀLWHPꢀXVLQJꢀWKHꢀFXUVRUꢀEXWWRQVꢀŸꢆźꢀRQꢀWKHꢀ

SURMHFWRUꢀRUꢀUHPRWHꢀFRQWUROꢅꢀDQGꢀSUHVVꢀWKHꢀFXUVRUꢀEXWWRQꢀŹꢀ

on the projector or remote control, or the ENTER button on

the remote control to progress. Then perform it referring to

the following table.

PICTURE

IMAGE

INPUT

SETUP

SCREEN

OPTION

COLOR SPACE AUTO

VIDEO FORMAT AUTO

FRAME LOCK

INFORMATION

TURN OFF

EASY MENU

Item

Description

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀVZLWFKHVꢀWKHꢀPRGHꢀIRUꢀFRORUꢀVSDFHꢂꢀ

AUTO RGB SMPTE240 REC709 REC601

• This item can be chosen only at a RGB signal or a component

video signal.

COLOR SPACE

• The AUTO mode automatically selects the optimum mode.

• The AUTO operation may not work well at some signals. In such a

case, it might be good to select a suitable mode except AUTO.

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀVZLWFKHVꢀWKHꢀmode for video format.

AUTO

NTSC

PAL

SECAM

ꢀꢀꢀꢀꢀꢀꢀ1ꢁ3$/ꢀ ꢀ0ꢁ3$/ꢀ NTSC4.43

• This item performs only at a video signal from the VIDEO port or

WKHꢀ6ꢁ9,'(2ꢀSRUWꢂꢀ)RUꢀDꢀFRPSRQHQWꢀYLGHRꢀVLJQDOꢅꢀWKHꢀVLJQDOꢀW\SHꢀLVꢀ

LGHQWL¿HGꢀDXWRPDWLFDOO\ꢅꢀLQGHSHQGHQWO\ꢀRIꢀWKLVꢀIXQFWLRQꢂ

VIDEO FORMAT

• The AUTO mode automatically selects the optimum mode.

• The AUTO operation may not work well at some signals. If the

picture becomes unstable (ex. an irregular picture, a color lack),

please select the mode depending on the input signal.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Multifunctional settings

INPUT menu (continued)

Item

Description

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀWXUQVꢀWKHꢀIUDPHꢀORFNꢀIXQFWLRQꢀRQꢆRIIꢂꢀ

TURN ON TURN OFF

• This item performs only at a RGB signal with vertical frequency of

50 to 72 Hz.

FRAME LOCK

INFORMATION

• When the TURN ON is selected, a moving picture is displayed

more smoothly.

• This function may cause a certain degradation of the picture. In

such a case, please select the TURN OFF.

Choosing this item displays a dialog titled “INPUT INFORMATION”.

It shows the information about the current input.

INPUTꢁ,1)250$TION

RGB

1024x768 @60Hz

FRAME LOCK

INPUTꢁ,1)250$TION

6ꢁ9,'(2

SECAM

AUTO

• The “FRAME LOCK” message on the dialog means the frame lock

function is working. ( 33)

• This item can't be chosen at no signal.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Multifunctional settings

SETUP menu

With the SETUP menu, items shown in the table below can

be performed.

&KRRVHꢀDQꢀLWHPꢀXVLQJꢀWKHꢀFXUVRUꢀEXWWRQVꢀŸꢆźꢀRQꢀWKHꢀ

SURMHFWRUꢀRUꢀUHPRWHꢀFRQWUROꢅꢀDQGꢀSUHVVꢀWKHꢀFXUVRUꢀEXWWRQꢀŹꢀ

on the projector or remote control, or the ENTER button on

the remote control to progress. Then perform it referring to

the following table.

[

]

:SELECT

100

MENU RGB

PICTURE

IMAGE

INPUT

SETUP

SCREEN

OPTION

ZOOM

KEYSTONE

WHISPER

MIRROR

VOLUME

NORMAL

EASY MENU

Item

Description

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀDGMXVWVꢀWKHꢀ]RRPꢀꢃPDJQLI\LQJꢀSRZHUꢄꢂ

Large Small

ZOOM

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀFRUUHFWVꢀWKHꢀNH\VWRQHꢀGLVWRUWLRQꢂ

Upper in the data Lower in the data

• The adjustable range of this function will vary with the type of input

KEYSTONE

WHISPER

signal. At some signals, this function may not work well.

• When the V:INVERT or the H&V:INVERT is selected under the

item MIRROR, if the projector screen is inclined or if the projector is

angled downward, this function may not work correctly.

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀWXUQVꢀRIIꢆRQꢀWKHꢀZKLVSHUꢀPRGHꢂ

NORMAL

WHISPER

• When the WHISPER is selected, acoustic noise and screen

brightness are reduced.

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀVZLWFKHVꢀWKHꢀPRGHꢀIRUꢀPLUURUꢀVWDWXVꢂ

MIRROR

VOLUME

NORMAL

H:INVERT

V:INVERT

H&V:INVERT

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀDGMXVWVꢀWKHꢀYROXPHꢂ

High Low

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Multifunctional settings

SCREEN menu

With the SCREEN menu, items shown in the table below can

be performed.

&KRRVHꢀDQꢀLWHPꢀXVLQJꢀWKHꢀFXUVRUꢀEXWWRQVꢀŸꢆźꢀRQꢀWKHꢀ

SURMHFWRUꢀRUꢀUHPRWHꢀFRQWUROꢅꢀDQGꢀSUHVVꢀWKHꢀFXUVRUꢀEXWWRQꢀŹꢀ

on the projector or remote control, or the ENTER button on

the remote control to progress. Then perform it referring to

the following table.

[

]

:SELECT

ENGLISH

MENU RGB

PICTURE

IMAGE

INPUT

SETUP

SCREEN

OPTION

LANGUAGE

MENU POSITION

OSD BRIGHT

BLANK

START UP

MyScreen

BLACK

ORIGINAL

EASY MENU

MyScreen Lock

MESSAGE

TURN OFF

TURN ON

Item

Description

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀVZLWFKHVꢀWKHꢀ26'ꢀꢃ2Qꢀ6FUHHQꢀ'LVSOD\ꢄꢀ

language.

ENGLISH Ù FRANÇAIS Ù DEUTSCH Ù ESPAÑOL Ù ITALIANO

NORSK Ù NEDERLANDS Ù PORTUGUÊS Ù

LANGUAGE

ޓޓޓޓ

ꢀÙ

Ù SVENSKA Ù

SUOMI Ù POLSKIÙ TÜRKÇE

8VLQJꢀWKHꢀEXWWRQVꢀŻꢆŹꢆŸꢆźꢀDGMXVWVꢀWKHꢀPHQXꢀSRVLWLRQꢂ

MENU POSITION To quit the operation, press the MENU button or keep no operation

for 10 seconds.

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀVZLWFKHVꢀWKHꢀEULJKWQHVVꢀOHYHOꢀRIꢀWKHꢀ26'ꢀꢃ2Qꢀ

Screen Display).

Bright Dark

OSD BRIGHT

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀVZLWFKHVꢀWKHꢀPRGHꢀIRUꢀWKHꢀEODQNꢀVFUHHQꢂ

The blank screen is the screen for the temporarily blanking feature

(

21). It is displayed by pressing the BLANK button.

MyScreen

ORIGINAL

BLUE

WHITE

BLACK

MyScreen is the screen you can register a desired screen.

ORIGINAL screen is the existing standard screen. BLUE, WHITE

DQGꢀ%/$&.ꢀDUHꢀQRQꢁSDWWHUQHGꢀꢃSODLQꢄꢀVFUHHQVꢀLQꢀHDFKꢀFRORUꢂ

BLANK

• To avoid remaining as an afterimage, the MyScreen and the

ORIGINAL screens will change to the BLACK screen after several

minutes.

• For the MyScreen, please refer to the item MyScreen ( 36).

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Multifunctional settings

SCREEN menu (continued)

Item

Description

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀVZLWFKHVꢀWKHꢀPRGHꢀIRUꢀWKHꢀVWDUWꢀXSꢀVFUHHQꢂ

The start up screen is the screen displayed when no signal or an

unsuitable signal is detected.

MyScreen

ORIGINAL

TURN OFF

MyScreen is the screen you can register a desired screen.

ORIGINAL screen is the existing standard screen. When the TURN

OFF is selected, the BLACK screen is used.

START UP

• To avoid remaining as an afterimage, the MyScreen and the

ORIGINAL screens will change to the BLANK screen after several

minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it

will change to the BLACK screen.

• For the MyScreen, please refer to the item MyScreen

below

About the BLANK screen, please refer to the item BLANK ( 35).

This item functions for capturing the MyScreen of the blank screen

and the start up screen. Please execute displaying the input

including the picture you want to capture.

1. Choosing this item displays a dialog

MyScreen

Do you start capturing this picture?

titled “MyScreen”. It will ask you if

you start capturing the picture from

ESC

:NO

ENTER

:YES

the current screen. Please wait for

the target picture to be displayed.

2. Press the ENTER button when the

picture is display. The picture will

freeze and the frame for capturing

appears.

To stop performing, press the

MyScreen

Move the capture area

as you want.

RESET or ESC button.

MyScreen

ꢈꢂꢀꢀ8VLQJꢀWKHꢀEXWWRQVꢀŻꢆŹꢆŸꢆźꢀDGMXVWꢀ

the frame position. Please move the

frame to the position of the picture

which you want to use.

:NEXT

45%

ESC

:RETURN

ENTER

My Screen

The frame may not be able to be

moved for some input signals.

To start registration, press the ENTER button.

To restore the screen and return to the previous dialog, press the

RESET or ESC button.

Registration takes several minutes. When the registration is

completed, the registered screen and the message “MyScreen

UHJLVWUDWLRQꢀLVꢀ¿QLVKHGꢂ´ꢀDUHꢀGLVSOD\HGꢀIRUꢀVHYHUDOꢀVHFRQGVꢂꢀ,IꢀWKHꢀ

registration failed, the message “A capturing error has occurred.

Please try again.” is displayed.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Multifunctional settings

SCREEN menu (continued)

Item

Description

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀturns on/off the MyScreen lock function.

TURN ON TURN OFF

When the TURN ON is selected, the item MyScreen cannot be

performed. Use this function for protecting the current MyScreen.

MyScreen Lock

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀWXUQVꢀRQꢆRIIꢀWKHꢀPHVVDJHꢀIXQFWLRQꢂ

TURN ON

TURN OFF

When the TURN ON is selected, the following message function

works.

“AUTO IN PROGRESS” while automatically adjusting

”NO INPUT IS DETECTED”

”SYNC IS OUT OF RANGE”

MESSAGE

”Searching ....” while searching for an input signal

”Detecting….” when an input signal is detected

The indication of the input signal by changing

The indication of the aspect ration by changing

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Multifunctional settings

OPTION menu

[

]

:SELECT

MENU RGB

With the OPTION menu, items shown in the table below can

be performed.

PICTURE

IMAGE

INPUT

SETUP

SCREEN

OPTION

AUTO SEARCH

AUTO OFF

LAMP TIME

FILTER TIME

SERVICE

TURN OFF

&KRRVHꢀDQꢀLWHPꢀXVLQJꢀWKHꢀFXUVRUꢀEXWWRQVꢀŸꢆźꢀRQꢀWKHꢀ

SURMHFWRUꢀRUꢀUHPRWHꢀFRQWUROꢅꢀDQGꢀSUHVVꢀWKHꢀFXUVRUꢀEXWWRQꢀŹꢀ

on the projector or remote control, or the ENTER button on

the remote control to progress, except for the items LAMP

TIME and FILTER TIME. Then perform it referring to the

following table.

EASY MENU

Item

Description

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀWXUQVꢀRQꢆRIIꢀWKHꢀDXWRPDWLFꢀVLJQDOꢀVHDUFKꢀ

function.

TURN ON

TURN OFF

When the TURN ON is selected, detecting no signal automatically

cycles through input ports in order of following. Then when an input

is found, the projector will stop searching and display the image.

AUTO SEARCH

RGB ꢀ6ꢁ9,'(2ꢀ VIDEO

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀDGMXVWVꢀWKHꢀWLPHꢀWRꢀFRXQWꢀGRZQꢀWRꢀ

automatically turn the projector off.

Long (max. 99 minutes)

Short (min. 0 minute = DISABLE)

AUTO OFF

ENABLE

AUTO OFF

DISABLE

AUTO OFF

When the time is set to 0, the projector is not turned off

automatically.

When the time is set to 1 to 99, and when the passed time with

DꢀQRꢁVLJQDOꢀRUꢀDQꢀXQVXLWDEOHꢀVLJQDOꢀUHDFKHVꢀDWꢀWKHꢀVHWꢀWLPHꢅꢀWKHꢀ

projector lamp will go off and the power indicator begins blinking.

Please refer to the section “Turning off the power” ( 17).

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Multifunctional settings

OPTION menu (continued)

Item

Description

The lamp time is the time counted after the last resetting. It is

shown in the OPTION menu as the usage time of the lamp.

3UHVVLQJꢀWKHꢀ5(6(7ꢀEXWWRQꢀRQꢀWKHꢀUHPRWHꢀFRQWUROꢀRUꢀWKHꢀEXWWRQꢀŹꢀ

of the projector displays a dialog. To reset the lamp time, select the

5(6(7ꢀXVLQJꢀWKHꢀEXWWRQꢀŸꢂ

LAMP TIME

RESET CANCEL

• Please reset the lamp time only when you have replaced the lamp,

for a suitable indication about the lamp.

• For the lamp replacement, see the section "Lamp" ( 41, 42).

7KHꢀ¿OWHUꢀWLPHꢀLVꢀWKHꢀWLPHꢀFRXQWHGꢀDIWHUꢀWKHꢀODVWꢀUHVHWWLQJꢂꢀ,WꢀLVꢀVKRZQꢀ

LQꢀWKHꢀ237,21ꢀPHQXꢀDVꢀWKHꢀXVDJHꢀWLPHꢀRIꢀWKHꢀDLUꢀ¿OWHUꢂ

3UHVVLQJꢀWKHꢀ5(6(7ꢀEXWWRQꢀRQꢀWKHꢀUHPRWHꢀFRQWUROꢀRUꢀWKHꢀEXWWRQꢀŹꢀRIꢀWKHꢀSURMHFWRUꢀ

GLVSOD\VꢀDꢀGLDORJꢂꢀ7RꢀUHVHWꢀWKHꢀ¿OWHUꢀWLPHꢅꢀVHOHFWꢀWKHꢀ5(6(7ꢀXVLQJꢀWKHꢀEXWWRQꢀŸꢂ

FILTER TIME

RESET CANCEL

•

3OHDVHꢀUHVHWꢀWKHꢀ¿OWHUꢀWLPHꢀRQO\ꢀZKHQꢀ\RXꢀKDYHꢀFOHDQHGꢀRUꢀUHSODFHGꢀ

WKHꢀDLUꢀ¿OWHUꢅꢀIRUꢀDꢀVXLWDEOHꢀLQGLFDWLRQꢀDERXWꢀWKHꢀDLUꢀ¿OWHUꢂ

•ꢀ)RUꢀWKHꢀDLUꢀ¿OWHUꢀFOHDQLQJꢅꢀVHHꢀWKHꢀVHFWLRQꢀꢓ$LUꢀ¿OWHUꢓꢀ( 43).

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Multifunctional settings

OPTION menu (continued)

Item

Description

Selecting this item displays the SERVICE menu.

6HOHFWꢀDQꢀLWHPꢀXVLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢅꢀDQGꢀSUHVVꢀWKHꢀEXWWRQꢀŹꢀRUꢀ

the ENTER button on the remote control to execute the item.

FAN SPEED

AUTO ADJUST

GHOST

FILTER MESSAG

FACTORY RESET

FAN SPEED

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀVZLWFKHVꢀWKHꢀURWDWLRQꢀVSHHGꢀRIꢀWKHꢀFRROLQJꢀ

fans. The HIGH is the mode for use at highlands etc. Note that the

projector is noisier when the HIGH is selected.

HIGH

NORMAL

AUTO ADJUST

8VLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀHQDEOHVꢆGLVDEOHVꢀWKHꢀDXWRPDWLFꢀDGMXVWPHQWꢂ

When DISABLE is selected, the automatic adjustment feature is

disabled, although rough adjustment is automatically performed

depending on the basic setting.

ENABLE

DISABLE

•

Depending on conditions, such as input image, signal cable to the

projector, environment around the projector, etc., the automatic adjustment

may not work correctly. In such a case, please choose DISABLE to

disable the automatic adjustment, and make adjustment manually.

GHOST

ꢊꢂꢀꢀ6HOHFWꢀDꢀFRORUꢀHOHPHQWꢀRIꢀJKRVWꢀXVLQJꢀWKHꢀEXWWRQVꢀŻꢆŹꢂꢀ

2. $GMXVWꢀWKHꢀVHOHFWHGꢀHOHPHQWꢀXVLQJꢀWKHꢀEXWWRQVꢀŸꢆźꢀWRꢀGLVDSSHDUꢀJKRVWꢂ

SERVICE

FILTER MESSAGE

8VHꢀWKHꢀŸꢆźꢀEXWWRQꢀWRꢀVHWꢀWKHꢀWLPHUꢀIRUꢀWKHꢀLQWHUYDOꢀWRꢀVKRZꢀWKHꢀ

PHVVDJHꢀIRUꢀFOHDQLQJꢀXSꢀWKHꢀDLUꢀ¿OWHUꢂꢀ

50h

100h

200h

300h

TURN OFF

After selecting “50h”, “100h”, “200h”, or “300h”, the message

“REMINDER ***HRS PASSED AFTER THE LAST FILTER CHECK”

will appear after the timer reaches the interval time set by the menu.

(

39) :KHQꢀWKHꢀ³7851ꢀ2))´ꢀLVꢀFKRVHQꢅꢀWKHꢀDLUꢀ¿OWHUꢀFOHDQLQJꢀ

message will not appear.

•ꢀ3OHDVHꢀFKHFNꢀDQGꢀFOHDQꢀWKHꢀDLUꢀ¿OWHUꢀSHULRGLFDOO\ꢅꢀHYHQꢀLIꢀWKHUHꢀLVꢀQRꢀ

PHVVDJHꢂꢀ,IꢀWKHꢀDLUꢀ¿OWHUꢀEHFRPHVꢀWRꢀEHꢀEORFNHGꢀE\ꢀGXVWꢀRUꢀRWKHUVꢅꢀ

the internal temperature will rise, which could cause malfunction, or

reduce the lifetime of the projector.

• It is recommended to choose “100h” in general. Please be careful

with the operating environment of the projector and the condition of

WKHꢀDLUꢀ¿OWHUꢅꢀHVSHFLDOO\ꢀZKHQꢀWKHꢀ³ꢇꢌꢌK´ꢅꢀ³ꢈꢌꢌKꢀRUꢀ³7851ꢀ2))´ꢀLVꢀ

chosen.

FACTORY RESET

6HOHFWLQJꢀ5(6(7ꢀXVLQJꢀWKHꢀEXWWRQꢀŸꢀSHUIRUPVꢀWKLVꢀIXQFWLRQꢂꢀ%\ꢀWKLVꢀIXQFWLRQꢅꢀ

all the items in all of menus will collectively return to the initial setting. Note

that the items LAMP TIME, FILTER TIME and LANGUAGE are not reset.

RESET CANCEL

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Maintenance

Lamp

WARNING

HIGH VOLTAGE

HIGH TEMPERATURE

HIGH PRESSURE

Ź7KHꢀSURMHFWRUꢀXVHVꢀDꢀKLJKꢁSUHVVXUHꢀPHUFXU\ꢀJODVVꢀODPSꢂꢀ7KHꢀODPSꢀFDQꢀbreak

with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn

over time. Note that each lamp has a different lifetime, and some may burst or

burn out soon after you start using them. In addition, when the bulb bursts, it is

possible for shards of glassꢀWRꢀÀ\ꢀLQWRꢀWKHꢀODPSꢀKRXVLQJꢅꢀDQGꢀIRUꢀgas containing

mercury to escape from the projector’s vent holes.

ŹAbout disposal of a lamp • This product contains a mercury lamp; do not

put in trash. Dispose of in accord with environmental laws.

For lamp recycling, go to www.lamprecycle.org. (in the US)

For product disposal, contact your local government agency or www.eiae.org (in

the US) or www.epsc.ca (in Canada).

For more information, call your dealer.

• If the lamp should break (it will make a loud bang when it does),

unplug the power cord from the outlet, and make sure to request a

replacement lamp from your local dealer. Note that shards of glass

could damage the projector’s internals, or cause injury during handling,

so please do not try to clean the projector or replace the lamp yourself.

Disconnect

• If the lamp should break (it will make a loud bang when it does),

the plug

ventilate the room well, and make sure not to breathe the gas that

from the

comes out of the projector vents, or get it in your eyes or mouth.

power

• Before replacing the lamp, turn the projector off and unplug the power

outlet

cord, then wait at least 45 minutes for the lamp to cool sufficiently.

Handling the lamp while hot can cause burns, as well as damaging the

lamp.

• Never unscrew except the appointed (marked by an arrow) screws.

• Do not open the lamp door while the projector is suspended from

above. This is dangerous, since if the lamp’s bulb has broken, the

shards will fall out when the cover is opened. In addition, working in

high places is dangerous, so ask your local dealer to have the lamp

replaced even if the bulb is not broken.

• Do not use the projector with the lamp door removed. At the lamp

replacing, make sure that the screws are screwed in firmly. Loose

screws could result in damage or injury.

• 8VHꢀRQO\ꢀWKHꢀODPSꢀRIꢀWKHꢀVSHFL¿HGꢀW\SHꢂ

• If the lamp breaks soon after the first time it is used, it is possible

that there are electrical problems elsewhere besides the lamp. If this

happens, contact your local dealer or a service representative.

•

Handle with care: jolting or scratching could cause the lamp bulb to burst during use.

• If the indicators or a message prompts you to replace the lamp (see

the section "Related Messages" and "Regarding the indicator Lamps"),

replace the lamp as soon as possible. Using the lamp for long periods

of time, or past the replacement date, could cause it to burst. Do not

use old (used) lamps; this is a cause of breakage.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Maintenance

Lamp (continued)

$ꢀODPSꢀKDVꢀDꢀ¿QLWHꢀSURGXFWꢀOLIHꢂꢀ8VLQJꢀWKHꢀODPSꢀIRUꢀORQJꢀSHULRGVꢀRIꢀWLPHꢀFRXOGꢀ

cause the pictures darker or the color tone poor. Note that each lamp has a

different lifetime, and some may burst or burn out soon after you start using them.

Preparation of a new lamp and early replacement are recommended.

To prepare a new lamp, contact your dealer and tell the lamp type number.

Type number = 78-6969-9812-5.

Turn the projector off, and unplug the power cord. Allow the lamp to cool for

at least 45 minutes.

Prepare a new lamp.

If the projector is mounted on the ceiling, or if the lamp has broken, also ask

the dealer to replace the lamp.

In the case of replacement by yourself,

Claws of lamp door

After making sure that the projector has cooled

adequately, slowly turn over the projector, so

that the bottom is facing up.

Please loosen the screw (marked by arrow). Then,

unhook the claws of the lamp door and remove

the lamp door.

Screw marked by arrow

Loosen the 2 screws (marked by arrow) of the lamp,

and slowly pick up the lamp by the

handles.

Insert the new lamp, and retighten

¿UPO\ꢀWZRꢀVFUHZVꢀWKDWꢀDUHꢀORRVHQHGꢀLQꢀ

the previous process to lock it in place.

Interlocking the 2 tabs of the lamp

Screws marked

door to the projector, position the

by arrow

lamp door on the projector, and push

Center

WKHꢀFHQWHUꢀSRLQWꢀRIꢀWZRꢀFODZVꢀWRꢀ¿[ꢀWKHꢀODPSꢀ

point

door. 7KHQꢀUHWLJKWHQꢀ¿UPO\ꢀWKHꢀVFUHZꢀRIꢀWKHꢀ

of claws

lamp door.

Tabs

Slowly turn the projector so that the top is

facing up.

Turn the projector on and reset the lamp time using the LAMP TIME function

(

39)

in the OPTION menu

(1) Press the MENU button to display a menu. Only when the EASY MENU has

appeared, please perform the next step (2).

ꢃꢇꢄꢀ3RLQWꢀDWꢀWKHꢀ³*Rꢀ7Rꢀ$GYDQFHꢀ0HQXꢀ«´ꢀLQꢀWKHꢀPHQXꢀXVLQJꢀźꢆŸꢀEXWWRQꢅꢀWKHQꢀ

SUHVVꢀWKHꢀŹꢀEXWWRQꢂꢀ

ꢃꢈꢄꢀ3RLQWꢀDWꢀWKHꢀ³237,21´ꢀLQꢀWKHꢀOHIWꢀFROXPQꢀRIꢀWKHꢀPHQXꢀXVLQJꢀźꢆŸꢀEXWWRQꢅꢀWKHQꢀ

SUHVVꢀWKHꢀŹꢀEXWWRQꢂ

NOTE • Please reset the lamp time only when you have replaced the lamp,

for a suitable indication about the lamp.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Maintenance

$LUꢀÀOWHU

WARNING

ŹBefore caring, make sure the power switch is off and the power

FDEOHꢀLVꢀQRWꢀSOXJJHGꢀLQꢅꢀWKHQꢀDOORZꢀWKHꢀSURMHFWRUꢀWRꢀFRROꢀVXI¿FLHQWO\ꢂꢀ7KHꢀFDUHꢀLQꢀDꢀ

high temperature state of the projector could cause an electric shock, a burn and/or

malfunction to the projector.

Ź8VHꢀRQO\ꢀWKHꢀDLUꢀ¿OWHUꢀRIꢀWKHꢀVSHFL¿HGꢀW\SHꢂꢀ'RꢀQRWꢀXVHꢀWKHꢀSURMHFWRUꢀZLWKꢀWKHꢀDLUꢀ¿OWHUꢀ

DQGꢀWKHꢀ¿OWHUꢀFRYHUꢀUHPRYHGꢂꢀ,WꢀFRXOGꢀUHVXOWꢀLQꢀDꢀ¿UHꢀDQGꢆRUꢀPDOIXQFWLRQꢀWRꢀWKHꢀSURMHFWRUꢂ

Ź7KHꢀDLUꢀ¿OWHUꢀVKRXOGꢀEHꢀFOHDQHGꢀSHULRGLFDOO\ꢂꢀ,IꢀWKHꢀDLUꢀ¿OWHUꢀEHFRPHVꢀFORJJHGꢀE\ꢀ

GXVWꢀRUꢀWKHꢀOLNHꢅꢀLQWHUQDOꢀWHPSHUDWXUHVꢀULVHꢀDQGꢀFRXOGꢀFDXVHꢀDꢀ¿UHꢅꢀDꢀEXUQꢀDQGꢆRUꢀ

malfunction to the projector.

NOTEꢀꢀ‡ꢀ3OHDVHꢀUHSODFHꢀWKHꢀDLUꢀ¿OWHUꢀZKHQꢀLWꢀLVꢀGDPDJHGꢀRUꢀWRRꢀVRLOHGꢅꢀDQGꢀDOVRꢀ

when you replace the lamp.

‡ꢀ3OHDVHꢀUHVHWꢀWKHꢀ¿OWHUꢀWLPHꢀRQO\ꢀZKHQꢀ\RXꢀKDYHꢀFOHDQHGꢀRUꢀUHSODFHGꢀWKHꢀDLUꢀ¿OWHUꢅꢀ

(

39)

IRUꢀDꢀVXLWDEOHꢀLQGLFDWLRQꢀDERXWꢀWKHꢀDLUꢀ¿OWHUꢂ

• The projector may display the message such as “CHECK THE AIR FLOW” or turn

off the projector, to prevent the internal heat level rising.

,IꢀWKHꢀDLUꢀ¿OWHUꢀEHFRPHVꢀFORJJHGꢀE\ꢀGXVWꢀRUꢀWKHꢀOLNHꢅꢀLQWHUQDOꢀWHPSHUDWXUHVꢀULVHꢀDQGꢀFRXOGꢀ

FDXVHꢀDꢀ¿UHꢅꢀDꢀEXUQꢀDQGꢆRUꢀPDOIXQFWLRQꢀWRꢀWKHꢀSURMHFWRUꢂꢀ:KHQꢀWKHꢀLQGLFDWRUVꢀRUꢀDꢀPHVVDJHꢀ

SURPSWVꢀ\RXꢀWRꢀFOHDQꢀWKHꢀDLUꢀ¿OWHUꢅꢀFOHDQꢀWKHꢀDLUꢀ¿OWHUꢀDVꢀVRRQꢀDVꢀSRVVLEOHꢂ

3OHDVHꢀFKHFNꢀDQGꢀFOHDQꢀWKHꢀDLUꢀ¿OWHUꢀSHULRGLFDOO\ꢅꢀHYHQꢀLIꢀWKHUHꢀLVꢀQRꢀPHVVDJHꢂ3OHDVHꢀUHSODFHꢀ

WKHꢀDLUꢀ¿OWHUꢀZKHQꢀLWꢀLVꢀGDPDJHGꢀRUꢀWRRꢀVRLOHGꢂꢀ3UHSDUDWLRQꢀRIꢀDꢀQHZꢀDLUꢀ¿OWHUꢀLVꢀUHFRPPHQGHGꢂ

7RꢀSUHSDUHꢀDꢀQHZꢀDLUꢀ¿OWHUꢅꢀFRQWDFWꢀ\RXUꢀGHDOHUꢀDQGꢀWHOOꢀWKHꢀDLUꢀ¿OWHUꢀW\SHꢀQXPEHUꢂ

Type number = 78-8118-9584-2

And also when you replace the lamp, please replace the air filter. An air filter of

VSHFL¿HGꢀW\SHꢀZLOOꢀFRPHꢀWRJHWKHUꢀZLWKꢀDꢀUHSODFHPHQWꢀODPSꢀIRUꢀWKLVꢀSURMHFWRUꢂ

Turn the projector off, and unplug the power cord. Allow the lamp to cool for at

1. _{least 45 minutes.}

Disconnect all the connectors and adapters that were connected to the projector’s

2. _{SRUWVꢂꢀ7KHQꢀVORZO\ꢀWXUQꢀWKHꢀSURMHFWRUꢀVRꢀWKDWꢀWKHꢀOHQVꢁVLGHꢀLVꢀIDFLQJꢀXSꢂꢀ3OHDVHꢀEHꢀ}

FDUHIXOꢀIRUꢀDꢀSURMHFWRUꢀQRWꢀWRꢀIDOOꢂꢀ:KLOHꢀWKHꢀSURMHFWRUꢀLVꢀSODFHGꢀOHQVꢁVLGHꢀXSꢅꢀKROGꢀWKHꢀ

projector.

5HPRYHꢀWKHꢀ¿OWHUꢀFRYHUꢀDQGꢀWKHꢀDLUꢀ¿OWHUꢂꢀ+ROGꢀWKHꢀNQREVꢀZKLOHꢀSXOOLQJꢀRXWꢀLWꢂ

8VXDOꢀ¿OWHUꢀFRYHU

Filter cover’s

knobs

$LUꢀ¿OWHU¶Vꢀ

knob

)LOWHUꢀFRYHUꢀIRUꢀERWWRPꢁXSꢀXVH

Filter cover’s

knobs

$SSO\ꢀDꢀYDFXXPꢀFOHDQHUꢀWRꢀWKHꢀYHQWꢀRIꢀWKHꢀSURMHFWRUꢀIRUꢀWKHꢀDLUꢀ¿OWHUꢂꢀ$QGꢀWKHQꢀ

4. _{slowly turn the projector bottom up.}

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Maintenance

$LUꢀ¿OWHUꢀꢁFRQWLQXHGꢂ

$SSO\ꢀDꢀYDFXXPꢀFOHDQHUꢀWRꢀWKHꢀDLUꢀ¿OWHUꢀDQGꢀ¿OWHUꢀFRYHUꢂ

7KHQꢀVHWꢀDꢀQHZꢀRUꢀFOHDQHGꢀDLUꢀ¿OWHUꢀLQWRꢀSODFHꢂ

,QꢀFDVHꢀRIꢀWKHꢀ¿OWHUꢀFRYHUꢀIRUꢀERWWRPꢁXSꢀXVHꢅꢀUHPRYHꢀWKHꢀDLUꢀ¿OWHUꢀIURPꢀWKHꢀ¿OWHUꢀ

FRYHUꢀDQGꢀFOHDQꢀHDFKꢂꢀ$IWHUꢀFOHDQLQJꢅꢀUHDWWDFKꢀWKHꢀFOHDQHGꢀ¿OWHUꢀWRꢀWKHꢀ¿OWHUꢀFRYHUꢂ

$LUꢀ¿OWHU

Claws

5DLOꢀRIꢀDLUꢀ¿OWHU

)LOWHUꢀFRYHUꢀIRUꢀERWWRPꢁXSꢀXVH

3OHDVHꢀUHSODFHꢀWKHꢀDLUꢀ¿OWHUꢀZKHQꢀLWꢀLVꢀGDPDJHGꢀRUꢀWRRꢀVRLOHGꢂ

6. ^{3RVLWLRQꢀWKHꢀDLUꢀ¿OWHUꢀDQGꢀ¿OWHUꢀFRYHUꢀLQWRꢀSODFHꢂ}

8VXDOꢀ¿OWHUꢀFRYHU

Push the points of “PUSH” word

Interlocking the tabs,

VQDSꢀWKHꢀ¿OWHUꢀFRYHUꢀLQWRꢀSODFHꢂ

ZLWKꢀFODZVꢀWRꢀ¿[ꢀWKHꢀDLUꢀ¿OWHUꢂ

Tabs

)LOWHUꢀFRYHUꢀIRUꢀERWWRPꢁXSꢀXVH

,QWHUORFNLQJꢀWKHꢀWDEVꢅꢀVQDSꢀWKHꢀ¿OWHUꢀFRYHUꢀLQWRꢀSODFHꢂ

Tabs

Slowly turn the projector so that the top is facing up, except for the case of

ERWWRPꢁXSꢀXVHꢂ

7XUQꢀWKHꢀSURMHFWRUꢀRQꢀDQGꢀUHVHWꢀWKHꢀ¿OWHUꢀWLPHꢀXVLQJꢀWKHꢀ),/7(5ꢀ7,0(ꢀIXQFWLRQꢀ

(

39)

in the OPTION menu

(1) Press the MENU button to display a menu. When the EASY MENU has

appeared, please skip the next step (2).

ꢃꢇꢄꢀ3RLQWꢀDWꢀWKHꢀ³237,21´ꢀLQꢀWKHꢀOHIWꢀFROXPQꢀRIꢀWKHꢀPHQXꢀXVLQJꢀźꢆŸꢀEXWWRQꢅꢀWKHQꢀ

SUHVVꢀWKHꢀŹꢀEXWWRQꢂ

ꢃꢈꢄꢀ3RLQWꢀDWꢀWKHꢀ³),/7(5ꢀ7,0(´ꢀXVLQJꢀźꢆŸꢀEXWWRQꢅꢀWKHQꢀSUHVVꢀWKHꢀŹꢀEXWWRQꢂꢀ$ꢀ

dialog will appear.

ꢃꢒꢄꢀ3UHVVꢀWKHꢀŸꢀEXWWRQꢀWRꢀVHOHFWꢀ³5(6(7´ꢀRQꢀWKHꢀGLDORJꢂꢀ,WꢀSHUIRUPVꢀUHVHWWLQJꢀWKHꢀ

¿OWHUꢀWLPHꢂ

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Maintenance

Other care

WARNING ŹDo not take care of the projector during use or immediately after

use. Handling while the projector is in a high temperature could cause a burn and/

or malfunction to the projector. Before operating, make sure that the power switch is

off, that the power cord is not plugged in, and that the projector is cool adequately.

Ź1HYHUꢀWU\ꢀWRꢀFDUHꢀIRUꢀWKHꢀLQVLGHꢀRIꢀWKHꢀSURMHFWRUꢀSHUVRQDOO\ꢂꢀ'RLQJꢀLVꢀVRꢀ

dangerous.

Ź$YRLGꢀZHWWLQJꢀWKHꢀSURMHFWRUꢀRUꢀLQVHUWLQJꢀOLTXLGVꢀLQꢀWKHꢀSURMHFWRUꢂꢀ,WꢀFRXOGꢀUHVXOWꢀ

LQꢀDꢀ¿UHꢅꢀDQꢀHOHFWULFꢀVKRFNꢅꢀDQGꢆRUꢀPDOIXQFWLRQꢀWRꢀWKHꢀSURMHFWRUꢂꢀ

• Don’t put a container containing water, cleaner or chemicals near the

projector.

• Don’t use aerosols or sprays.

CAUTION Ź3OHDVHꢀWDNHꢀULJKWꢀFDUHꢀRIꢀWKHꢀSURMHFWRUꢀDFFRUGLQJꢀWRꢀWKHꢀ

IROORZLQJꢂꢀ,QFRUUHFWꢀFDUHꢀFRXOGꢀFDXVHꢀQRWꢀRQO\ꢀDQꢀLQMXU\ꢀEXWꢀDGYHUVHꢀLQÀXHQFHꢀ

such as discoloration, peeling paint, etc.

• Do not use cleaner or chemicals other than those listed below.

• Do not polish or wipe with hard objects.

Inside of the projector

In order to ensure the safe use of your projector, please have it cleaned and

inspected by your dealer about once every year.

Caring for the lens

,IꢀWKHꢀOHQVꢀLVꢀÀDZHGꢅꢀVRLOHGꢀRUꢀIRJJHGꢅꢀLWꢀFRXOGꢀFDXVHꢀGHWHULRUDWLRQꢀRIꢀGLVSOD\ꢀ

quality. Please take care of the lens, being cautious of the handling.

Turn the projector off, and unplug the power cord. Allow the projector to cool

VXI¿FLHQWO\ꢂ

After making sure that the projector is cool adequately, lightly wipe the lens

ZLWKꢀDꢀFRPPHUFLDOO\ꢀDYDLODEOHꢀOHQVꢁFOHDQLQJꢀZLSHꢂꢀ'RꢀQRWꢀWRXFKꢀWKHꢀOHQVꢀ

directly with your hand.

Caring for the cabinet and remote control

,QFRUUHFWꢀFDUHꢀFRXOGꢀKDYHꢀDGYHUVHꢀLQÀXHQFHꢀVXFKꢀDVꢀGLVFRORUDWLRQꢅꢀSHHOLQJꢀSDLQWꢅꢀ

etc.

Turn the projector off, and unplug the power cord. Allow the projector to cool

VXI¿FLHQWO\ꢂ

After making sure that the projector is cool adequately, lightly wipe with gauze

or a soft cloth.

If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water,

and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Related messages

When the unit's power is on, messages such as those shown below may be

displayed. When any such message is displayed on the screen, please respond

as described below. If the same message is displayed after the treatment, or if a

message other than the following appears, please contact your dealer or service

company.

Although these messages will be automatically disappeared around several

minutes, it will be reappeared every time the power is turned on.

Message

Description

There is no input signal.

NO INPUT IS DETECTED

ON ***

3OHDVHꢀFRQ¿UPꢀWKHꢀVLJQDOꢀLQSXWꢀFRQQHFWLRQꢅꢀDQGꢀWKHꢀVWDWXVꢀ

of the signal source.

The horizontal or vertical frequency of the input signal

LVꢀQRWꢀZLWKLQꢀWKHꢀVSHFL¿HGꢀUDQJHꢁ

SYNC IS OUT OF RANGE

ON *** fH *****kHz fV *****Hz

3OHDVHꢀFRQ¿UPꢀWKHꢀVSHFVꢀIRUꢀWKLVꢀXQLWꢀRUꢀWKHꢀVLJQDOꢀVRXUFHꢀVSHFVꢂ

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

5HODWHGꢀPHVVDJHVꢀꢁFRQWLQXHGꢂ

Message

Description

The internal portion temperature is rising.

Please turn the power OFF, and allow the unit to cool down

DWꢀOHDVWꢀꢇꢌꢀPLQXWHVꢂꢀ$IWHUꢀKDYLQJꢀFRQ¿UPHGꢀWKHꢀIROORZLQJꢀ

items, please turn the power ON again.

• Is there blockage of the air passage aperture?

• ,VꢀWKHꢀDLUꢀ¿OWHUꢀGLUW\"

CHECK THE AIR FLOW

• Does the peripheral temperature exceed 35°C?

• If the same indication is displayed after the treatment,

please set the HIGH at the FAN SPEED of the item

SERVICE of the OPTION menu.

REMINDER

*** HRS PASSED AFTER THE

LAST FILTER CHECK.

FILTER MAINTENANCE IS ESSENTIAL

TO REMOVE WARNING MESSAGE,

RESET FILTER TIMER.

$ꢀQRWHꢀRIꢀSUHFDXWLRQꢀZKHQꢀFOHDQLQJꢀWKHꢀDLUꢀ¿OWHUꢁ

Please immediately turn the power OFF, and clean or

FKDQJHꢀWKHꢀDLUꢀ¿OWHUꢀE\ꢀUHIHUULQJꢀWRꢀWKHꢀ³$LUꢀ)LOWHU´ꢀVHFWLRQꢀRIꢀ

WKLVꢀPDQXDOꢂꢀ$IWHUꢀ\RXꢀKDYHꢀFOHDQHGꢀRUꢀFKDQJHGꢀWKHꢀDLUꢀ¿OWHUꢅꢀ

SOHDVHꢀEHꢀVXUHꢀWRꢀUHVHWꢀWKHꢀ¿OWHUꢀWLPHUꢀ( 39).

SEE MANUAL FURTHER INFO.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Regarding the indicator lamps

/LJKWLQJꢀDQGꢀÀDVKLQJꢀRIꢀWKHꢀ32:(5ꢀLQGLFDWRUꢅꢀWKHꢀ/$03ꢀLQGLFDWRUꢅꢀDQGꢀWKHꢀ7(03ꢀ

indicator have the meanings as described in the table below. Please respond

in accordance with the instructions within the table. If the same indication is

displayed after the treatment, or if an indication other than the following is

displayed, please contact your dealer or service company.

POWER

LAMP

TEMP

Description

indicator indicator indicator

Lighting

In Orange

Turned

The projector is in a standby state.

off

Please refer to the section “Power On/Off”. ( 16)

Blinking

In Green

Turned

The projector is warming up.

off

Please wait.

Lighting

In Green

Turned

The projector is in an on state.

off

Ordinary operations may be performed.

Blinking

In 2UDQJH

Turned

The projector is cooling down.

off

Please wait.

The projector is cooling down. A certain error

has been detected.

Blinking

In Red

ꢃGLVFUHꢁ ꢃGLVFUHꢁ

tionary) tionary)

3OHDVHꢀZDLWꢀXQWLOꢀWKHꢀ32:(5ꢀLQGLFDWRUꢀ¿QLVKHVꢀEOLQNꢅꢀ

and then perform the proper response measure using

the item descriptions below as reference.

The lamp does not light, and there is a

possibility that interior portion has become

heated.

Please turn the power off, and allow the unit to cool

down at least 20 minutes. After the projector has

VXI¿FLHQWO\ꢀFRROHGꢀGRZQꢅꢀSOHDVHꢀPDNHꢀFRQ¿UPDWLRQꢀRIꢀ

the following items, and then turn the power on again.

• Is there blockage of the air passage aperture?

‡ꢀ,VꢀWKHꢀDLUꢀ¿OWHUꢀGLUW\"

Blinking

In Red

Lighting

In Red

Lighting Turned

In Red

off

• Does the peripheral temperature exceed 35°C?

If the same indication is displayed after the treatment,

please change the lamp by referring to the section

“Lamp”. ( 41)

7KHꢀODPSꢀGRRUꢀKDVꢀQRWꢀEHHQꢀSURSHUO\ꢀ¿[HGꢀ

(attached).

Blinking

In Red

Lighting

In Red

Please turn the power off, and allow the unit to cool

down at least 45 minutes. After the projector has

VXI¿FLHQWO\ꢀFRROHGꢀGRZQꢅꢀSOHDVHꢀPDNHꢀFRQ¿UPDWLRQꢀRIꢀ

the attachment state of the lamp door. After performing

any needed maintenance, turn the power on again. If

the same indication is displayed after the treatment,

please contact your dealer or service company.

Blinking Turned

In Red off

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

5HJDUGLQJꢀWKHꢀLQGLFDWRUꢀODPSVꢀꢁFRQWLQXHGꢂ

POWER

LAMP

TEMP

Description

indicator indicator indicator

The cooling fan is not operating.

Please turn the power off, and allow the unit to cool

down at least 20 minutes. After the projector has

Blinking

In Red

Turned Blinking VXI¿FLHQWO\ꢀFRROHGꢀGRZQꢅꢀSOHDVHꢀPDNHꢀFRQ¿UPDWLRQꢀ

Lighting

In Red

off

In Red that no foreign matter has become caught in the fan,

etc. and then turn the power on again.

If the same indication is displayed after the treatment,

please contact your dealer or service company.

There is a possibility that the interior portion

has become heated.

Please turn the power off, and allow the unit to cool

down at least 20 minutes. After the projector has

VXI¿FLHQWO\ꢀFRROHGꢀGRZQꢅꢀSOHDVHꢀPDNHꢀFRQ¿UPDWLRQꢀRIꢀ

Blinking

In Red

Lighting

In Red

Turned Lighting the following items, and then turn the power on again.

off

In Red • Is there blockage of the air passage aperture?

‡ꢀ,VꢀWKHꢀDLUꢀ¿OWHUꢀGLUW\"

• Does the peripheral temperature exceed 35°C?

If the same indication is displayed after the treatment,

please set the HIGH at the FAN SPEED of the item

SERVICE of the OPTION menu. ( 40)

There is a possibility that the interior portion

has become overcooled.

Lighting

In Green

Alternative

blinking in Red

Please use the unit within the usage temperature

parameters (5°C to 35°C). After the treatment, resent

the power to ON.

,WꢀLVꢀWLPHꢀWRꢀFOHDQꢀWKHꢀDLUꢀ¿OWHUꢁ

Please immediately turn the power OFF, and clean

RUꢀFKDQJHꢀWKHꢀDLUꢀ¿OWHUꢀE\ꢀUHIHUULQJꢀWRꢀWKHꢀVHFWLRQꢀ³$LUꢀ

)LOWHU´ꢂꢀ$IWHUꢀFOHDQLQJꢀRUꢀFKDQJHGꢀWKHꢀDLUꢀ¿OWHUꢅꢀSOHDVHꢀ

EHꢀVXUHꢀWRꢀUHVHWꢀWKHꢀ¿OWHUꢀWLPHUꢂꢀ$IWHUꢀWKHꢀWUHDWPHQWꢅꢀ

resent the power to ON.

Lighting

In Green

Simultaneous

blinking in Red

NOTE • When the interior portion has become overheated, for safety

purposes, the power source is automatically turned off, and the indicator lamps

may also be turned off. In such a case, press the “{” (OFF) side of the power

VZLWFKꢅꢀDQGꢀZDLWꢀDWꢀOHDVWꢀꢒꢋꢀPLQXWHVꢂꢀ$IWHUꢀWKHꢀSURMHFWRUꢀKDVꢀVXI¿FLHQWO\ꢀFRROHGꢀ

GRZQꢅꢀSOHDVHꢀPDNHꢀFRQ¿UPDWLRQꢀRIꢀWKHꢀDWWDFKPHQWꢀVWDWHꢀRIꢀWKHꢀODPSꢀDQGꢀODPSꢀ

door and then turn the power on again.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Phenomena that may easily be mistaken for machine defects

WARNING ŹNever use the projector if abnormal operations such as

smoke, strange odor, excessive sound, damaged casing or elements or cables,

penetration of liquids or foreign matter, etc. should occur. In such cases,

immediately turn off the power switch and then disconnect the power plug from

the power outlet. After making sure that the smoke or odor has stopped, contact

your dealer or service company.

Before requesting repair, please check in

accordance with the following chart. This

operation sometimes resolves your problem.

If the situation cannot be corrected,

The projector’s microprocessor may need

to be reset. Please push the restart switch by using a pin or similar.

Some setting may be wrong. Please use the FACTORY RESET function of

SERVICE menu in the OPTION menu ( 40) to reset all settings to factory

default.

Then, if the problem is not removed after maintenance, please contact your dealer

or service company.

Reference

Phenomenon

Cases not involving a machine defect

page

The electrical power cord is not plugged in.

Correctly connect the power cord.

The power switch is not set to the on position.

Set the power switch to [ | ] (On).

The main power source has been interrupted during

operation such as by a power outage (blackout), etc.

Please turn the power off, and allow the unit to cool down at

OHDVWꢀꢇꢌꢀPLQXWHVꢂꢀ$IWHUꢀWKHꢀSURMHFWRUꢀKDVꢀVXI¿FLHQWO\ꢀFRROHGꢀ

down, please turn the power on again.

16, 17

Power does not

come on.

Either there is no lamp and/or lamp door, or either of

WKHVHꢀKDVꢀQRWꢀEHHQꢀSURSHUO\ꢀ¿[HGꢁ

Please turn the power off, and allow the unit to cool down at

OHDVWꢀꢒꢋꢀPLQXWHVꢂꢀ$IWHUꢀWKHꢀSURMHFWRUꢀKDVꢀVXI¿FLHQWO\ꢀFRROHGꢀ

GRZQꢅꢀSOHDVHꢀPDNHꢀFRQ¿UPDWLRQꢀRIꢀWKHꢀDWWDFKPHQWꢀVWDWHꢀRIꢀ

the lamp and lamp door, and then turn the power on again.

41, 42

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

3KHQRPHQDꢀWKDWꢀPD\ꢀHDVLO\ꢀEHꢀPLVWDNHQꢀIRUꢀPDFKLQHꢀGHIHFWVꢀꢁFRQWLQXHGꢂ

Reference

Phenomenon

Cases not involving a machine defect

page

The lens cover is closed.

4, 16

13, 14

Remove the lens cover.

The signal cables are not correctly connected.

Correctly connect the connection cables.

The brightness is adjusted to an extremely low level.

No pictures are

displayed.

Adjust the BRIGHT to a higher level using the menu function 25, 27

or the remote control.

The computer cannot detect the projector as a plug

and play monitor.

Make sure that the computer’s can detect a plug and play

monitor using other plug and play monitor.

Color settings are not correctly adjusted.

Perform picture adjustments by changing the COLOR

TEMP, COLOR, TINT and/or COLOR SPACE settings,

using the menu functions.

25, 28

Colors have a

IDGHGꢁꢀRXW

appearance, or

Color tone is

poor.

COLOR SPACE setting is not suitable.

Change the COLOR SPACE setting to AUTO, RGB,

SMPTE240 , REC709 or REC601.

The brightness and/or contrast are adjusted to an

extremely low level.

25, 27

26, 34

Adjust the BRIGHT and/or CONTRAST settings to a higher

level using the menu function.

Pictures appear

dark.

The WHISPER function is working.

Select the NORMAL to the item WHISPER in the SETUP

menu.

The lamp is approaching the end of its product

41, 42,

lifetime.

Replace the lamp.

Either the focus and/or horizontal phase settings are

not properly.

19, 30

Adjust the focus using the focus ring, and/or H PHASE

using the menu function.

Pictures appear

blurry.

The lens is dirty or misty.

Clean the lens by referring to the section “Caring for the

lens”.

NOTE • Although bright spots or dark spots may appear on the screen, this

is a unique characteristic of liquid crystal displays, and such do not constitute or

imply a machine defect.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

6SHFLÀFDWLRQV

6SHFL¿FDWLRQV

NOTEꢀꢀ‡ꢀ7KLVꢀVSHFL¿FDWLRQVꢀDUHꢀVXEMHFWꢀWRꢀFKDQJHꢀZLWKRXWꢀQRWLFHꢂ

Item

6SHFL¿FDWLRQ

Product name

Liquid crystal projector

1.4 cm (0.55 type)

Panel size

Liquid

Crystal Drive system TFT active matrix

panel

Pixels

480,000 pixels (800 horizontal x 600 vertical)

F=1.80 f=21.4 mm

Lens

Lamp

165W UHB

Power Supply

$&ꢊꢌꢌꢁꢊꢇꢌ9ꢆꢇꢂꢎ$ꢅꢀ$&ꢇꢇꢌꢁꢇꢒꢌ9ꢆꢊꢂꢋ$

240W

Power Consumption

Temperature range

5 ~ 35°C (Operating)

285 (W) x 73 (H) x 202 (D) mm

(Not including protruding parts)

‡ꢀ3OHDVHꢀUHIHUꢀWRꢀWKHꢀIROORZLQJꢀ¿JXUHꢂ

Size

Weight (mass)

2.3 kg

RGB input:

RGB.......'ꢁVXEꢀꢊꢋSLQꢀPLQLꢀ[ꢀꢊ

Communication port:

CONTROL..........'ꢁVXEꢀꢑSLQꢀ[ꢀꢊ

Ports

Video input:

VIDEO ...................... RCA x 1

ꢀꢀ6ꢁ9,'(2ꢀ.............6ꢁ9LGHRꢀ[ꢀꢊ

Audio input:

AUDIO ............Stereo mini x 1

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

6SHFLÀFDWLRQV

6SHFL¿FDWLRQVꢀꢁFRQWLQXHGꢂ

285

[unit: mm]

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

S15i

TECHNICAL

Operator's Guide

Example of computer signal

Resolution (H x V) H. frequency (kHz) V. frequency (Hz)

Rating

Signal mode

720 x 400

640 x 480

800 x 600

832 x 624

1024 x 768

1152 x 864

1280 x 960

1280 x 1024

1600 x 1200

37.9

31.5

37.9

37.5

43.3

35.2

37.9

48.1

46.9

53.7

49.7

48.4

56.5

60.0

68.7

67.5

60.0

64.0

80.0

91.1

75.0

85.0

59.9

72.8

75.0

85.0

56.3

60.3

72.2

75.0

85.1

74.5

60.0

70.1

75.0

85.0

75.0

60.0

75.0

85.0

60.0

VESA

TEXT

VGA (60Hz)

VGA (72Hz)

VGA (75Hz)

VGA (85Hz)

SVGA (56Hz)

SVGA (60Hz)

SVGA (72Hz)

SVGA (75Hz)

SVGA (85Hz)

Mac 16” mode

XGA (60Hz)

XGA (70Hz)

XGA (75Hz)

XGA (85Hz)

1152 x 864(75Hz)

1280 x 960 (60Hz)

SXGA (60Hz)

SXGA (75Hz)

SXGA (85Hz)

UXGA (60Hz)

VESA

NOTE • Be sure to check jack type, signal level, timing and resolution

before connecting this projector to a computer.

• Some computers may have multiple display screen modes. Use of some of

these modes will not be possible with this projector.

• Depending on the input signal, full-size display may not be possible in some

cases. Refer to the number of display pixels above.

• Although the projector can display signals with resolution up to UXGA

(1600x1200), the signal will be converted to the projector’s panel resolution

before being displayed. The best display performance will be achieved if the

resolutions of the input signal and projector panel are identical.

• Automatically adjustment may not function correctly with some input signals.

• The image may not be displayed correctly when the input sync signal is a

composite sync or a sync on G.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical (continued)

Initial set signals

The following signals are used for the initial settings. The signal timing of some

computer models may be different. In such case, adjust the items V POSITION

and H POSITION in the IMAGE menu.

Back porch (B)

Front porch (D)

Back porch (b)

Front porch (d)

Display interval (C)

Display interval (c)

Data

H. Sync.

Data

V. Sync.

Sync (A)

Sync (a)

+RUL]RQWDOꢀVLJQDOꢀWLPLQJꢀꢃȝVꢄ

Vertical signal timing (lines)

Computer/

Signal

(A)

2.0

3.8

1.3

2.0

1.6

(B)

(C)

(D)

(a)

(b)

(c)

(d)

TEXT

3.0 20.3 1.0

1.9 25.4 0.6

3.8 20.3 1.0

3.8 20.3 0.5

2.2 17.8 1.6

3.6 22.2 0.7

2.2 20.0 1.0

1.3 16.0 1.1

3.2 16.2 0.3

2.7 14.2 0.6

3.9 14.5 0.6

2.5 15.8 0.4

1.9 13.7 0.3

2.2 13.0 0.2

2.2 10.8 0.5

TEXT

400

480

600

624

768

VGA (60Hz)

VGA (72Hz)

VGA (75Hz)

VGA (85Hz)

VGA (60Hz)

VGA (72Hz)

VGA (75Hz)

VGA (85Hz)

SVGA (56Hz)

SVGA (60Hz)

SVGA (72Hz)

SVGA (75Hz)

SVGA (85Hz)

Mac 16" mode

XGA (60Hz)

XGA (70Hz)

XGA (75Hz)

XGA (85Hz)

SVGA (56Hz) 2.0

SVGA (60Hz) 3.2

SVGA (72Hz) 2.4

SVGA (75Hz) 1.6

SVGA (85Hz) 1.1

Mac 16" mode 1.1

XGA (60Hz)

XGA (70Hz)

XGA (75Hz)

XGA (85Hz)

2.1

1.8

1.2

1.0

1152 x 864

1.2

2.4 10.7 0.6

864

(75Hz)

1280x960

(60Hz)

SXGA (60Hz) 1.0

SXGA (75Hz) 1.1

SXGA (85Hz) 1.0

UXGA (60Hz) 1.2

1280x960

(60Hz)

SXGA (60Hz)

SXGA (75Hz)

SXGA (85Hz)

UXGA (60Hz)

1.0

2.9

11.9

0.9

960

2.3

1.8

1.4

1.9

11.9

9.5

8.1

9.9

0.4

0.1

0.4

38 1024

44 1024

46 1200

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical (continued)

Connection to the ports

RGB

CONTROL

S-VIDEO

VIDEO

AUDIO

RGB

D-sub 15pin mini shrink jack

11 12 13 14 15

At RGB signal

• VidHRꢀVLJQDOꢐꢀ5*%ꢀVHSDUDWHꢅꢀ$QDORJꢅꢀꢌꢂꢎ9SꢁSꢅꢀꢎꢋȍꢀWHUPLQDWHGꢀꢃSRVLWLYHꢄ

• H/V. sync. Signal: TTL level (positive/negative)

• Composite sync. Signal: TTL level

At component video signal

• System: 525i (480i), 525p (480p), 625i (576i), 750p (720p), 1125i (1080i)

At RGB signal

Signal

Video Red

Video Green

Video Blue

(No connection)

Ground

Ground Red

Ground Green

Ground Blue

(No connection)

At component video signal

Signal

C_R/P_R

C_B/P_B

(No connection)

Ground

C_R/P_RGround

Y Ground

C_B/P_BGround

(No connection)

Ground

10 Ground

11 (No connection)

12 SDA (DDC data)

13 H. sync / Composite sync.

14 V. sync.

(No connection)

15 SCL (DDC clock)

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical (continued)

Connection to the ports (continued)

RGB

CONTROL

S-VIDEO

VIDEO

AUDIO

CONTROL

D-sub 9pin plug

• About the details of RS-232C communication, please refer to the following page.

Pin Signal Pin Signal Pin Signal

7 RTS

8 CTS

9 (No connection)

1 (No connection)

2 RD

3 TD

4 (No connection)

5 Ground

6 (No connection)

S-VIDEO

Mini DIN 4pin jack

Signal

&RORUꢀVLJQDOꢀꢌꢂꢇꢍꢏ9SꢁSꢀꢃ176&ꢅꢀEXUVWꢄꢅꢀꢎꢋȍꢀWHUPLQDWRU

&RORUꢀVLJQDOꢀꢌꢂꢈꢌꢌ9SꢁSꢀꢃ3$/ꢆ6(&$0ꢅꢀEXUVWꢄꢀꢎꢋȍꢀWHUPLQDWRU

%ULJKWQHVVꢀVLJQDOꢅꢀꢊꢂꢌ9SꢁSꢅꢀꢎꢋȍꢀWHUPLQDWRU

Ground

VIDEO

RCA jack

• System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL60

‡ꢀꢊꢂꢌ“ꢌꢂꢊ9SꢁSꢅꢀꢎꢋȍꢀWHUPLQDWRU

AUDIO

Ø3.5 stereo mini jack

‡ꢀꢇꢌꢌꢀP9ꢀUPVꢅꢀPRUHꢀWKDQꢀꢒꢎNꢀȍꢀRUꢀPRUH

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical (continued)

RS-232C Communication

CONTROL port

of the projector

RS-232C cable

RS-232C port

of the computer

- (1)

(1) CD

(2) RD

(3) TD

RD (2)

TD (3)

- (4)

(4) DTR

(5) GND

(6) DSR

(7) RTS

(8) DTS

(9) RI

GND (5)

- (6)

RTS (7)

CTS (8)

- (9)

Connecting the cable

1. ^{Turn off the projector and the computer.}

Connect the CONTROL port of the projector with a RS-232C port of the

computer by a RS-232C cable. Use the cable that fulfills the specification

shown in the previous page.

Turn the computer on, and after the computer has started up turn the

projector on.

Communications setting

19200bps, 8N1

1. Protocol

Consist of header (7 bytes) + command data (6 bytes).

2. Header

BE + EF + 03 + 06 + 00 + CRC_low + CRC_high

&5&BORZꢀꢐꢀ/RZHUꢀE\WHꢀRIꢀ&5&ꢀÀDJꢀIRUꢀFRPPDQGꢀGDWD

&5&BKLJKꢀꢐꢀ8SSHUꢀE\WHꢀRIꢀ&5&ꢀÀDJꢀIRUꢀFRPPDQGꢀGDWD

3. Command data

Command data chart

byte_0

byte_1

byte_2

byte_3

high

byte_4

Setting code

low

byte_5

high

Action

Type

low

high

low

Action (byte_0 - 1)

Action

&ODVVL¿FDWLRQ

SET

GET

INCREMENT Increment setup value by 1.

DECREMENT

EXECUTE

Content

Change setting to desired value.

Read projector internal setup value.

Run a command.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical (continued)

Requesting projector status (Get command)

(1) Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes)+

‘00H’ +‘00H’) from the computer to the projector.

(2) The projector returns the response code ‘1DH’+ data (2 bytes) to the computer.

Changing the projector settings (Set command)

(1) Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) +

setting code (2 bytes)) from the computer to the projector.

(2) The projector changes the setting based on the above setting code.

(3) The projector returns the response code ‘06H’ to the computer.

Using the projector default settings (Reset Command)

(1) The computer sends the default setting code Header + Command data (‘06H’+

‘00H’ + type (2 bytes) +‘00H’+‘00H’) to the projector.

ꢃꢇꢄꢀ7KHꢀSURMHFWRUꢀFKDQJHVꢀWKHꢀVSHFL¿HGꢀVHWWLQJꢀWRꢀWKHꢀGHIDXOWꢀYDOXHꢂ

(3) The projector returns the response code ‘06H’ to the computer.

Increasing the projector setting value (Increment command)

(1) The computer sends the increment code Header + Command data (‘04H’+

‘00H’+ type (2 bytes) +‘00H’+‘00H’) to the projector.

(2) The projector in creases the setting value on the above setting code.

(3) The projector returns the response code ‘06H’ to the computer.

Decreasing the projector setting value (Decrement command)

(1) The computer sends the decrement code Header + Command data (‘05H’+

‘00H’+ type (2 bytes) +‘00H’ + ‘00H’) to the projector.

(2) The projector decreases the setting value on the above setting code.

(3) The projector returns the response code ‘06H’ to the computer.

When the projector cannot understand the received command

When the projector cannot understand the received command, the error code ‘15H’

is sent back to the computer.

Sometimes the projector cannot properly receive the command. In such a

case, the command is not executed and the error code ‘15H’ is sent back to the

computer. If this error code is returned, send the same command again.

When the projector cannot execute the received command.

When the projector cannot execute the received command, the error code ‘1cH’

+ ‘xxxxH’ is sent back to the computer. When the data length is greater than

indicated by the data length code, the projector ignore the excess data code.

Conversely when the data length is shorter than indicated by the data length

code, an error code will be returned to the computer.

NOTEꢀ‡ꢀ2SHUDWLRQꢀFDQQRWꢀEHꢀJXDUDQWHHGꢀZKHQꢀWKHꢀSURMHFWRUꢀUHFHLYHVꢀDQꢀXQGH¿QHGꢀ

command or data.

• Provide an interval of at least 40ms between the response code and any other code.

• The projector outputs test data when the power supply is switched ON, and when the

lamp is lit. Ignore this data.

• Commands are not accepted during warm-up.

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical (continued)

Command table

Command Data

Names

Operation Type

Header

CRC

Action

Type

Setting Code

Power

Set

Turn off

Turn on

Get

BE EF

06 00

2A D3

BA D2

19 D3

01 00

02 00

00 60

00 00

01 00

00 00

(Example return)

00 00

01 00

(On)

06 00

02 00

(Off)

(Cool down)

Input Source

Error Status

Set

RGB

VIDEO

S-VIDEO

Get

BE EF

FE D2

6E D3

9E D3

CD D2

D9 D8

01 00

02 00

00 20

20 60

00 00

01 00

02 00

00 00

Get

(Example return)

00 00

01 00

02 00

(Fan error)

06 00

03 00

(Normal)

04 00

(Cover error)

05 00

(Lamp error)

07 00

ꢀ

ꢁ7HPSꢀHUURUꢂꢀ

ꢁ$LUꢀÀRZꢀHUURUꢂꢀ ꢁ/DPSꢀWLPHꢀHUURUꢂꢀ

ꢁ&RROꢀHUURUꢂ

08 00

09 00

10 00

(Filter error) (Filter missing error)(Inner Sencer error)

BRIGHT

Get

BE EF

06 00

89 D2

EF D2

3E D3

58 D3

FD D3

9B D3

4A D2

A4 D2

23 F6

B3 F7

E3 F4

10 F6

02 00

04 00

05 00

06 00

02 00

04 00

05 00

06 00

01 00

02 00

03 20

00 00

01 00

04 00

00 00

Increment

Decrement

Execute

Get

Increment

Decrement

Execute

NORMAL

CINEMA

DYNAMIC

Get

03 20

00 70

04 20

01 70

BA 30

BRIGHT Reset

CONTRAST

CONTRAST Reset

MODE

Set

(Example return)

00 00

01 00

04 00

10 00

(Normal) (Cinema)

(Dynamic) (Custom)

GAMMA

#1 DEFAULT

#1 CUSTOM

#2 DEFAULT

#2 CUSTOM

#3 DEFAULT

#3 CUSTOM

Get

BE EF

06 00

07 E9

07 FD

97 E8

97 FC

67 E8

67 FC

F4 F0

FB FA

6B FB

9B FB

0B FA

C8 FA

01 00

02 00

01 00

02 00

A1 30

80 30

20 00

10 00

21 00

11 00

22 00

12 00

00 00

01 00

02 00

03 00

00 00

User Gamma Pattern Set

Off

9 step gray scale

15 steps gray scale

Ramp

Get

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical (continued)

Command table (continued)

Command Data

Names

Operation Type

Header

CRC

Action

Type

Setting Code

User Gamma Point 1

Get

BE EF

06 00

08 FE

6E FE

BF FF

F4 FF

92 FF

43 FE

B0 FF

D6 FF

07 FE

4C FE

2A FE

FB FF

38 FF

5E FF

8F FE

C4 FE

A2 FE

73 FF

80 FE

E6 FE

37 FF

7C FF

1A FF

CB FE

02 00

04 00

05 00

02 00

04 00

05 00

02 00

04 00

05 00

02 00

04 00

05 00

02 00

04 00

05 00

02 00

04 00

05 00

02 00

04 00

05 00

02 00

04 00

05 00

90 30

91 30

92 30

93 30

94 30

95 30

96 30

97 30

00 00

Increment

Decrement

Get

Increment

Decrement

Get

Increment

Decrement

Get

Increment

Decrement

Get

Increment

Decrement

Get

Increment

Decrement

Get

Increment

Decrement

Get

Increment

Decrement

User Gamma Point 2

User Gamma Point 3

User Gamma Point 4

User Gamma Point 5

User Gamma Point 6

User Gamma Point 7

User Gamma Point 8

COLOR TEMP

Set

LOW

MIDDLE

HIGH

CUSTOM

Get

BE EF

06 00

6B F4

9B F4

0B F5

3B F8

C8 F5

34 F4

52 F4

83 F5

70 F4

16 F4

C7 F5

8C F5

EA F5

3B F4

04 F5

62 F5

B3 F4

40 F5

26 F5

F7 F4

01 00

02 00

04 00

05 00

02 00

04 00

05 00

02 00

04 00

05 00

02 00

04 00

05 00

02 00

04 00

05 00

B0 30

B1 30

B2 30

B3 30

B5 30

B6 30

01 00

02 00

03 00

10 00

00 00

COLOR TEMP GAIN R

COLOR TEMP GAIN G

COLOR TEMP GAIN B

Get

Increment

Decrement

Get

Increment

Decrement

Get

Increment

Decrement

Get

Increment

Decrement

Get

COLOR TEMP

OFFSET R

COLOR TEMP

OFFSET G

Increment

Decrement

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical (continued)

Command table (continued)

Command Data

Names

Operation Type

Header

CRC

Action

Type

Setting Code

COLOR TEMP

OFFSET B

Get

Increment

Decrement

BE EF

06 00

BC F4

DA F4

0B F5

02 00

04 00

05 00

B7 30

00 00

COLOR

Get

Increment

Decrement

Execute

Get

Increment

Decrement

Execute

Get

Increment

Decrement

Execute

BE EF

06 00

B5 72

D3 72

02 73

80 D0

49 73

2F 73

FE 72

7C D1

F1 72

97 72

46 73

C4 D0

4A 72

DA 73

2A 73

79 72

0E D7

9E D6

6E D6

FE D7

F2 D6

62 D7

92 D7

02 D6

02 00

04 00

05 00

06 00

02 00

04 00

05 00

06 00

02 00

04 00

05 00

06 00

01 00

02 00

01 00

02 22

0A 70

03 22

0B 70

01 22

09 70

07 22

14 20

15 20

00 00

01 00

02 00

00 00

01 00

02 00

03 00

00 00

01 00

02 00

03 00

COLOR Reset

TINT

TINT Reset

SHARPNESS

SHARPNESS Reset

PROGRESSIVE

Set

TURN OFF

FILM

Get

MY MEMORY Load Set

MY MEMORY Save Set

ASPECT

Set

4:3

16:9

NORMAL

Get

BE EF

06 00

9E D0

0E D1

5E DD

AD D0

01 00

02 00

08 20

00 00

01 00

10 00

00 00

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical (continued)

Command table (continued)

Command Data

Names

Operation Type

Header

CRC

Action

Type

Setting Code

OVER SCAN

Get

BE EF

06 00

91 70

F7 70

26 71

EC D9

0D 83

6B 83

BA 82

E0 D2

F1 82

97 82

46 83

1C D3

49 83

2F 83

FE 82

B5 82

D3 82

02 83

68 D2

91 D0

02 00

04 00

05 00

06 00

02 00

04 00

05 00

06 00

02 00

04 00

05 00

06 00

02 00

04 00

05 00

02 00

04 00

05 00

06 00

09 22

27 70

00 21

02 70

01 21

03 70

03 21

02 21

04 70

0A 20

00 00

Increment

Decrement

Execute

Get

Increment

Decrement

Execute

Get

Increment

Decrement

Execute

Get

Increment

Decrement

Get

OVER SCAN Reset

V POSITION

V POSITION Reset

H POSITION

H POSITION Reset

H PHASE

H SIZE

Increment

Decrement

Execute

H SIZE Reset

AUTO ADJUST

COLOR SPACE

Set

AUTO

RGB

SMPTE240

REC709

REC601

Get

AUTO

NTSC

PAL

SECAM

NTSC4.43

M-PAL

N-PAL

BE EF

06 00

0E 72

9E 73

6E 73

FE 72

CE 70

3D 72

9E 75

FE 71

6E 70

6E 75

5E 72

FE 74

0E 71

0D 73

CB D6

5B D7

F8 D6

01 00

02 00

01 00

02 00

01 00

02 00

04 22

00 22

14 30

00 00

01 00

02 00

03 00

04 00

00 00

0A 00

04 00

05 00

09 00

02 00

08 00

07 00

00 00

01 00

00 00

VIDEO FORMAT

Get

FRAME LOCK

Set

TURN OFF

TURN ON

Get

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical (continued)

Command table (continued)

Command Data

Names

Operation Type

Header

CRC

Action

Type

Setting Code

ZOOM

Get

BE EF

06 00

D0 D0

B6 D0

67 D1

98 C9

B9 D3

DF D3

0E D2

08 D0

3B 23

AB 22

08 23

C7 D2

57 D3

A7 D3

37 D2

F4 D2

31 D3

57 D3

86 D2

02 00

04 00

05 00

06 00

02 00

04 00

05 00

06 00

01 00

02 00

01 00

02 00

04 00

05 00

0A 30

70 70

07 20

0C 70

00 33

01 30

01 20

00 00

01 00

00 00

01 00

02 00

03 00

00 00

Increment

Decrement

Execute

Get

Increment

Decrement

Execute

NORMAL

WHISPER

Get

NORMAL

H:INVERT

V:INVERT

H&V:INVERT

Get

ZOOM Reset

KEYSTONE V

KEYSTONE V Reset

WHISPER

Set

MIRROR

VOLUME

MUTE

Get

Increment

Decrement

Set

TURN OFF

TURN ON

Get

BE EF

06 00

46 D3

D6 D2

75 D3

01 00

02 00

02 20

00 00

01 00

00 00

LANGUAGE

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

NORSK

BE EF

06 00

F7 D3

67 D2

97 D2

07 D3

37 D1

A7 D0

57 D0

C7 D1

37 D4

A7 D5

37 DE

57 D5

C7 D4

F7 D6

67 D7

97 D7

07 D6

C4 D3

04 D7

62 D7

B3 D6

DC C6

01 00

02 00

04 00

05 00

06 00

05 30

15 30

43 70

00 00

01 00

02 00

03 00

04 00

05 00

06 00

07 00

08 00

09 00

10 00

0A 00

0B 00

0C 00

0D 00

0E 00

0F 00

00 00

NEDERLANDS

PORTUGUÊS

SVENSKA

3ɍ&&.ɂɃ

SUOMI

POLSKI

TÜRKÇE

Get

MENU POSITION H

Get

Increment

Decrement

Execute

MENU POSITION H

Reset

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical (continued)

Command table (continued)

Command Data

Names

Operation Type

Header

CRC

Action

Type

Setting Code

MENU POSITION V

Get

BE EF

06 00

40 D7

26 D7

F7 D6

A8 C7

02 00

04 00

05 00

06 00

16 30

44 70

00 00

Increment

Decrement

Execute

MENU POSITION V

Reset

OSD BRIGHT

Get

BE EF

06 00

A8 D5

CE D5

1F D4

FB CA

FB E2

CB D3

6B D0

9B D0

08 D3

FB D8

6B D9

C8 D8

CB CB

0B D2

9B D3

38 D2

3B EF

AB EE

08 EF

8F D6

1F D7

BC D6

B6 D6

26 D7

85 D6

08 86

6E 86

BF 87

C2 FF

58 DC

C2 F0

98 C6

02 00

04 00

05 00

01 00

02 00

01 00

02 00

01 00

02 00

01 00

02 00

01 00

02 00

01 00

02 00

04 00

05 00

02 00

06 00

02 00

06 00

18 30

00 30

20 30

04 30

C0 30

17 30

16 20

10 31

90 10

30 70

A0 10

40 70

00 00

20 00

40 00

03 00

05 00

06 00

00 00

01 00

00 00

20 00

00 00

01 00

00 00

01 00

00 00

01 00

00 00

01 00

00 00

Increment

Decrement

My Screen

ORIGINAL

BLUE

BLANK

Set

WHITE

BLACK

Get

TURN OFF

TURN ON

Get

My Screen

ORIGINAL

TURN OFF

Get

TURN OFF

TURN ON

Get

TURN OFF

TURN ON

Get

TURN OFF

TURN ON

Get

BLANK On/Off

START UP

Set

My Screen LOCK

Message

Set

AUTO SEARCH

AUTO POWER OFF

Get

Increment

Decrement

Get

Execute

Get

LAMP TIME

LAMP TIME Reset

FILTER TIME

FILER TIME Reset

Execute

MAGNIFY

Get

BE EF

06 00

7C D2

1A D2

CB D3

83 D2

13 D3

B0 D2

02 00

04 00

05 00

01 00

02 00

07 30

02 30

00 00

01 00

00 00

Increment

Decrement

NORMAL

FREEZE

Get

FREEZE

Set

3M™ Digital Projector S15i

Download from Www.Somanuals.com. All Manuals Search And Download.

Intended Use

Before operating this machine, please read this entire manual thoroughly. The 3M^TMMultimedia Projectors are designed, built, and tested for use

indoors, using 3M lamps, 3M ceiling mount hardware, and nominal local voltages.

The use of other replacement lamps, outdoor operation, or different voltages has not been tested and could damage the projector peripheral equip-

ment and/or create a potentially unsafe operating condition.

ꢀ0ꢁ0XOWLPHGLDꢁSURMHFWRUVꢁDQGꢁ:DOOꢁ'LVSOD\ꢁ6\VWHPVꢁDUHꢁGHVLJQHGꢁWRꢁRSHUDWHꢁLQꢁDꢁQRUPDOꢁRI¿FHꢁHQYLURQPHQWꢂ

• 16° to 29°C (60° to 85° F)

• 10- 80 %RH (without condensation)

•

0- 1828 m (0-6000 feet) above sea level

The ambient operating environment should be free of airborne smoke, grease, oil and other contaminates that can affect the operation or perfor-

mance of the projector.

Use of this product in adverse conditions will void the product warranty.

Let us help you make the most of your next presentation. We offer everything from presentation supplies to tips for better meetings. And we’re

the only transparency manufacturer that offers a recycling program for your used transparencies. For late-breaking news, handy reference and free

product samples, call us toll-free in the continental United States and Canada, 24 hours a day, or visit our Internet Website.

3M Austin Center

3M Canada

P.O. Box 5757

London, Ontario

N6A 4T1

3M Mexico, S.A. de C.V.

Apartado Postal 14-139

Mexico, D.F. 07000

Mexico

3M Europe

Building A145-5N-01

6801 River Place Blvd.

Austin, TX 78726-9000

Boulevard de l’Oise

95006 Cerge Pontoise Cedex

France

Litho in China

ꢎꢍꢁꢏꢑꢎꢌꢁꢑꢒꢋꢌꢁꢇꢀ5HYꢂꢀ$

Download from Www.Somanuals.com. All Manuals Search And Download.

3Com Switch LANplex 2500 User Manual
Acer Flat Panel Television MB243WABNS User Manual
ADC Switch TrueNet TracerLight User Manual
AG Neovo Computer Monitor RX W22 User Manual
AKG Acoustics Headphones MERLIN 232 User Manual
Allied Telesis Switch AR44xS series User Manual
Altinex Network Card DA1926AV User Manual
American Audio DJ Equipment Pro Scratch 1 User Manual
Axis Communications Security Camera P3364 LVE User Manual
Behringer Microphone A50 58833 00002 User Manual