Philips PL User Manual

3135-125-21331 10/09/02 DFU LO1-2K2 CH1, HC, OCC, PC, PL, TL  
PL, TL, PC,  
TC, OCC,  
CH1, HC  
Institutional Television  
Directions For Use  
P
1
3135-125-21331  
3135-125-21331 10/09/02 DFU LO1-2K2 CH1, HC, OCC, PC, PL, TL  
Philips Institutional TV Software  
Your Philips Institutional Television can be configured to operate in either "Consumer" or "Commercial" operational  
modes.  
Commercial Mode: Your Philips Institutional Television is configured at the Factory to operate in Commercial mode.  
When the television is in Commercial mode, access to its operation from its front panel controls or from a guest-mode  
remote can be limited, depending upon the settings of the Institutional TV features. For examples, the unit’s front panel  
controls can be “locked-out” (rendered inoperable), only certain channels can be selected, and/or the volume can be  
limited to a given range.  
Consumer Mode: When in the Consumer mode, the unit operates as a standard TV, bypassing the Institutional  
Television feature set, thus allowing normal initial power ON, channel selection, and volume control (as well as a vari-  
ety of selectable Menu features). When the TV is in Consumer mode, Philips RC-5 system 0 (guest-mode) remotes,  
such as the RC2524BK and the RL9820BK (optional accessories) can access the Consumer-mode Main Menu, and  
configure the television to the full extent offered in this mode. Guest-mode 21-button remotes such as the RC2524BK  
use the Menu button to access the Consumer menu. Guest-mode 20-button remotes such as the RL9820BK, which do  
not have a Menu button, use the Sleep button to access the Consumer menu. Simultaneously pressing the front panel’s  
Volume - and Volume + buttons also invokes the Consumer menu.  
Identifying the Operational Mode: To identify the television’s operational mode, a system 7 (commercial setup  
mode) master setup remote (RG4172BK or RC2573GR, optional accessory) must be used. With the RG4172BK or  
RC2573GR in setup mode (press TV SETUP on the RG4172BK or set switch to SETUP on the RC2573GR), press  
Recall. The following information will appear on-screen:  
STATUS ITEM  
STATUS DATA  
MEANING  
Status information title  
SYSTEM STATUS (LO1ITV-US4PV)  
MODE  
COMMERCIAL / CONSUMER  
CHANNEL / INPUT (CHANNEL, INPUT)  
OFF / ON  
Television’s operational mode  
Currently-tuned channel  
CHANNEL  
DCM  
Data communications module offline / online  
Internal data for factory / service use  
Signal present / absent  
CODES  
211 222 001 035  
TUNED / NOT TUNED  
0031h  
SIGNAL  
OP HOURS  
Operational hours. Number of cumulative  
hours unit has been operated (hexadecimal)  
ERRORS  
0 0 0 0 0  
3.3  
Internal data for factory / service use  
Television software version.  
VERSION  
Changing Operational Modes: To change the television’s mode between Consumer and Commercial modes, a sys-  
tem 7 (commercial setup mode) master setup remote must be used. With the RG4172BK or RC2573GR in setup mode  
(press TV SETUP on the RG4172BK or set the switch to SETUP on the RC2573GR), enter the following keystroke  
sequence: 0 2 4 9 9 5 Menu. Only the RG4172BK or RC2573GR, when in setup mode, can change the television’s  
mode between Consumer and Commercial, and provide complete access to the television’s Institutional Features. The  
RG4172BK or RC2573GR can be set to operate in either its master setup remote mode, or in guest-mode. The  
RG4172BK / RC2573GR guest mode facilitates testing the desired Institutional / Commercial configuration.  
3
3135-125-21331 10/09/02 DFU LO1-2K2 CH1, HC, OCC, PC, PL, TL  
SETTING THE INSTITUTIONAL TV OPERATIONAL MODE  
To change the operational mode of the Philips Institutional TV, use the RG4172BK or RC2573GR in setup mode (press  
TV SETUP on the RG4172BK), and enter the following keystroke sequence: 0 2 4 9 9 5 Menu. Select the desired mode  
from the Operational Mode menu. IMPORTANT NOTE: IF YOU CHANGE THE OPERATIONAL MODE TO CONSUMER  
MODE, YOU MUST POWER THE TELEVISION OFF AND BACK ON TO COMPLETE THE MODE CHANGE.  
NOTE: ONCE THE TELEVISION IS IN CONSUMER MODE, DO NOT USE THE SETUP REMOTE TO ACTIVATE COM-  
MERCIAL FEATURES. OTHERWISE, THE COMMERCIAL FEATURES WILL AFFECT CONSUMER OPERATION. IT WILL  
THEN BE NECESSARY TO PLACE THE TELEVISION BACK INTO COMMERCIAL MODE, THEN INTO CONSUMER MODE,  
AND THEN POWERED OFF AGAIN TO PROPERLY PLACE THE TELEVISION BACK INTO CONSUMER MODE.  
CURRENT MODE  
COMMERCIAL / CONSUMER  
PRESS 1  
CONSUMER MODE:  
COMMERCIAL MODE:  
PRESS 2  
EXIT WITHOUT CHANGING MODES:  
PRESS 0  
PHILIPS INSTITUTIONAL TV REMOTE CONTROLS  
The following remote controls (optional accessories) can be used with Philips Institutional televisions. This list is by no  
means all-inclusive. Other Philips and third-party remote controls not listed here may also be compatible.  
RC2524BK  
Guest Remote  
RL9820B  
Guest Remote  
RG4172BK  
Setup Remote  
RC2573GR  
Setup Remote  
29-button guest remote 20-button guest remote.  
with menu button, addi-  
tional features (VCR con-  
trol, etc.)  
Master setup remote.  
Required to change  
operational modes and  
access Institutional fea-  
tures. Press TV SETUP  
to place remote in  
SETUP mode.  
Future version of master  
setup remote.  
Fully  
functionally equivalent  
to RG4172BK. Place  
switch in SETUP posi-  
tion to place remote in  
setup mode.  
4
3135-125-21331 10/09/02 DFU LO1-2K2 CH1, HC, OCC, PC, PL, TL  
MENU ITEM SUMMARY  
The following table summarizes the Philips Institutional Television menu items that are available in the prefixed mod-  
els indicated. Menu items indicated with an “x” are available in the respective models. Items in bold are commercial  
features. Commercial menu item features only appear when the television is in Commercial Mode.  
MENU ITEM  
OPTIONS  
PL / TL  
PC, TC,  
HC  
OCC, CH1  
LANGUAGE  
ENGLISH/ESPANOL/FRANÇAIS  
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
CHANNEL INSTALL  
CABLE TUNING  
CURRENT RING  
BRIGHTNESS  
COLOR  
>
ON / OFF  
1 / 2 / 3 / 4  
----|---- 31  
x
x
x
x
x
x
x
x
x
x
x
x
----|---- 31  
CONTRAST  
----|---- 31  
SHARPNESS  
TINT  
----|---- 31  
----|---- 0  
NOISE REDUCTION  
SOUND MODE  
SAP  
ON/OFF  
MONO / STEREO  
OFF / NO SAP / ON  
AUDIO OUT  
FIXED / VARIABLE  
BALANCE  
----|---- 0  
TREBLE  
----|---- 31  
BASS  
----|---- 31  
INCRED STEREO  
AVL  
ON / OFF  
ON / OFF  
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
VOLUME BAR  
MIN VOLUME  
MAX VOLUME  
SWITCH ON VOLUME  
SWITCH ON CHANNEL  
POWER ON  
ON / OFF  
----|---- 0  
----|---- 63  
----|---- 0 - 63 / STANDARD  
Ch. 1-125 / FRONT / AUX / S-VIDEO / CVI / STANDARD  
STANDARD / FORCED  
CHANNEL DISPLAY  
KEYBOARD LOCK  
ESP  
NUMBER/LABEL/ALL/NONE  
ON/OFF  
1-99 / OFF  
AUDIO/MUTE  
EXT AUD / VID OUT  
WELCOME MESSAGE  
CHANNEL GUIDE  
REMINDER  
OFF / BLACK / BLUE  
ON / OFF  
>
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
POWER ON / OFF / ON  
ON / OFF  
3 DIGIT ENTRY  
A/A/V SWITCH  
CC  
ON / OFF  
ON / OFF  
OFF / CC-1 / CC-2 / CC ON MUTE  
SAVE CC  
ON / OFF  
V-CHIP MENU ITEM  
SAVE V-CHIP  
V-CHIP SETUP  
SLEEPTIMER  
SECURITY  
ON / OFF  
ON / OFF  
>
OFF / 15 / 30 / 45 / 60 / 90 / 120 / 180 / 240  
STANDARD / HIGH  
EXIT  
>
5
3135-125-21331 10/09/02 DFU LO1-2K2 CH1, HC, OCC, PC, PL, TL  
ITV Menu Items & Availability In Commercial Mode (Features Menu)  
The following menu is available on your Philips Institutional television when it is in Commercial mode. The Features  
Menu items are limited to the following when pressing Menu or Sleep on a guest-mode remote (or RG4172BK master  
setup remote in guest mode), or when pressing the front panel keyboard’s VOLUME + and VOLUME - simultaneous-  
ly (provided the television’s front panel keyboard has not been locked out, see KEYBOARD LOCK).  
FEATURES MENU  
CC  
OFF/CC-1/CC-2/CC ON MUTE  
SLEEPTIMER  
OFF/15/30/45/60/90/120/180/240  
V-CHIP SETUP (see V-CHIP MENU ITEM)  
EXIT  
>
>
Notes:  
> Regardless of whether the television is in Consumer or Commercial mode, if you press Menu on an RG4172BK  
or RC2573GR master setup remote when the setup remote is in setup mode, the television’s SETUP MENU  
described earlier will appear.  
> Certain features that are unique to commercial setup, such as POWER ON FORCED and KEYBOARD LOCK will  
remain in effect immediately after the television is placed in Consumer mode IF THE TELEVISION IS NOT FIRST POW-  
ERED OFF. Such features are denoted with a “*” in the menu item summary and descriptions.  
> The limited Features Menu appears when the television is in Commercial mode and a guest remote (or setup remote  
in guest mode) Menu or Sleep button is pressed, or when the television’s front panel keyboard VOLUME - and VOL-  
UME + are pressed simultaneously (provided the television’s front panel keyboard is not locked out, see KEYBOARD  
LOCK).  
Front Panel Controls*  
Refer also to the sections in this documentation regarding the use of the front panel controls, specifically front keyboard  
lock-out*.  
Philips Institutional Televisions typically have a front panel equipped with power on/off, volume, and channel controls.  
Channel - and Channel + normally change the television’s channel or input to any of the channels or inputs currently in  
the Channel Ring (see Channel Ring). Volume + and Volume - normally control the television’s audio volume.  
However, simultaneously pressing Volume + and Volume - invokes a menu. This will be either the Features Menu (see  
Features Menu, if the television is in Commercial Mode, or the Main Menu, if the television is in Consumer Mode.  
Once either menu is active, Channel + and Channel - navigate vertically to select a menu item, and Volume + and  
Volume - change the currently-selected menu item.  
* NOTE: FRONT PANEL CONTROLS ARE INOPERATIVE IF THE FRONT KEYBOARD HAS BEEN LOCKED OUT. SEE FRONT  
KEYBOARD LOCKOUT.  
6
3135-125-21331 10/09/02 DFU LO1-2K2 CH1, HC, OCC, PC, PL, TL  
HOW TO USE THE ON-SCREEN MENU  
This section explains the Philips Institutional Television’s menu items. As described previously, the availability of, and  
options within each item depend upon the television’s specific model and current operational mode (Consumer or  
Commercial) and the type of remote control command (guest or setup) issued.  
LANGUAGE  
SETUP x CONSUMER x FEATURES MENU_  
An on-screen LANGUAGE option is available. You may set the TV's onscreen menu to appear in either English, French,  
or Spanish text. With the Main Menu onscreen press the Menu button repeatedly, or use the Cursor (s) Up and Down (t)  
buttons, to select LANGUAGE with the TV’s highlight control bar. Press the Cursor Right (+>) or Left (<- ) button on  
the remote to select English, French (FRANCAIS), or Spanish (ESPANOL). Text in the onscreen Menu will appear in the  
selected language. Please note that the Language control only makes the TV's on-screen Menu items appear in the respec-  
tive language text. It does not change the language of other onscreen text features, such as Closed Captioning.  
CHANNEL INSTALL  
SETUP x CONSUMER x FEATURES MENU_  
When highlighted, use Channel Up/Down, or enter the desired channel number using the Number buttons you wish to  
edit. The following control items, contained within the Channel Installation menu, will affect the chosen channel.  
CHANNEL INSTALLATION  
CHANNEL  
FRONT / AUX / SVIDEO / CVI / 1 - 125  
CHANNEL RING (NON-HC MODELS)  
SAVED / DELETED  
CURRENT RING (HC MODELS ONLY)  
1 / 2 / 3 / 4  
INPUT  
(ANTENNA) / FRONT / AUX / SVIDEO / CVI  
LABEL  
(--------)  
VIDEO BLANK  
AUDIO BLANK  
AUTO PROGRAM  
EXIT  
OFF / ON  
OFF / ON  
>
>
CHANNEL RING (NON-HC MODELS ONLY) - When highlighted, press the Cursor Right (+>) or Left (<- ) buttons on  
the remote to choose SAVED (or DELETED). When SAVED is selected, the channel will remain or be added to the TV’s  
program memory. When DELETED is selected, the channel will be dropped from the TV’s program memory and will  
not appear when the TV channels are scanned (using the Channel +,- buttons).  
INPUT - When highlighted, press the Cursor Right (+>) or Left (<- ) buttons on the remote to select ANTENNA,  
FRONT, AUX, S-VIDEO, or CVI input signal options. The Input control directs the TV to select the specific indicated  
input whenever this channel is tuned.  
LABEL - When highlighted, press the Cursor Right (+>) button on the remote to select the first character space area.  
Then press the Cursor Up and Down buttons to scroll through the list of available letter characters, numbers, or symbols  
provided for your labeling use. Press the Cursor Right (+>) button to highlight the next character space and continue to  
repeat the process until the complete label or channel title has been entered. The Channel Label will appear in the cor-  
ner of the TV screen beside the selected channel number.  
VIDEO BLANK - When highlighted, press the Cursor Right (+>) or Left (<- ) buttons to turn the VIDEO BLANK con-  
trol ON (or OFF). When ON, no video will be shown when this specific channel is tuned. When OFF, normal viewing  
of video for this specific channel will take place.  
AUDIO BLANK - When highlighted, press the Cursor Right (+>) or Left (<- ) buttons to turn the AUDIO BLANK con-  
trol ON (or OFF). When ON, no sound will be heard through the TV speakers when the channel is tuned. When OFF,  
normal sound playback will be heard for the selected channel.  
CHANNEL - When highlighted, use Channel Up/Down, or enter the desired channel number using the Number buttons  
you wish to edit. The following control items, contained within the Channel Installation menu, will effect the chosen  
channel.  
AUTO PROGRAM - When highlighted, press the Cursor Right (+>) or Left (<- ) buttons to begin an automatic chan-  
nel search for all available received signal programs. Any channels found will be SAVED in the TV’s program memory.  
* COMMERCIAL FEATURE  
7
3135-125-21331 10/09/02 DFU LO1-2K2 CH1, HC, OCC, PC, PL, TL  
HOW TO USE THE ON-SCREEN MENU (CONTINUED)  
CABLE TUNING (OFF / ON)  
SETUP x CONSUMER x FEATURES MENU_  
Your Philips television can be configured to operate in either Cable TV or broadcast / off-air tuning modes. In other  
words, the TV must be configured depending upon whether a Cable TV signal or a normal antenna signal is applied to  
its 75-ohm ANT/CABLE plug.  
With the Menu onscreen, press the Menu button repeatedly, or use the Cursor Up and Down buttons, to select CABLE  
TUNING with the TV's highlight control bar. Press the Cursor Right or Left button on the remote to select ON if you  
DO have Cable TV connected to the TV, and Channels 1-125 may then be selected. Or, select OFF if you have an Antenna  
connected to the TV, and then only channels 2-69 may be selected. Press STATUS/EXIT to remove the on-screen menu.  
CURRENT RING (HC MODELS ONLY)  
SETUP x CONSUMER _ FEATURES MENU_  
Highlight CURRENT RING, then press the < or > button to select 1 through 4. There are four custom CHANNEL RINGS  
that can be setup within the CHANNEL INSTALL feature.  
BRIGHTNESS, COLOR, CONTRAST, SHARPNESS, TINT  
SETUP x CONSUMER x FEATURES MENU_  
Use the cursor-up and cursor-down buttons to select the picture parameter you wish to adjust. Use cursor left (<-) and  
cursor right (+>) to adjust the picture parameter.  
NOISE REDUCTION (ON/OFF)  
SETUP x CONSUMER x FEATURES MENU_  
This feature reduces video noise in the displayed picture. Effectively reduces noise while having maximum peaking in  
the bright parts of the picture. Differs from reducing Sharpness (see Sharpness) in that noise is reduced, but picture  
detail is preserved.  
SOUND MODE (MONO / STEREO)  
SETUP x CONSUMER x FEATURES MENU_  
Use cursor left (<-) and cursor right (+>) to select monaural or stereo audio mode.  
SAP (OFF / NO SAP / ON)  
SETUP x CONSUMER x FEATURES MENU_  
Second Audio Program (SAP) is part of the stereo broadcast system. Sent as an additional audio channel SAP can be  
heard apart from the current TV program sound. TV stations are free to use SAP for any number of purposes, but may  
be used for foreign language translations of TV shows (or for weather and news bulletins). If a SAP signal is not pres-  
ent with a selected program the SAP option cannot be selected  
AUDIO OUT (FIXED / VARIABLE)  
SETUP x CONSUMER x FEATURES MENU_  
When the FIXED audio out option is selected, the left and right audio outputs are fixed at a nominal 0.5vrms signal  
level, and are unaffected by the television’s volume control setting. When the VARIABLE audio out option is selected,  
the left and right audio outputs are controlled by the television’s volume control setting, and variable between 0.2vrms  
and 2vrms nominal signal levels.  
BALANCE / TREBLE / BASS (-----||||| nn)  
SETUP x CONSUMER x FEATURES MENU_  
Use the cursor-up and cursor-down buttons to select the audio parameter you wish to adjust. Use cursor left (<-) and  
cursor right (+>) to adjust the audio parameter.  
INCREDIBLE STEREO (ON / OFF)  
SETUP x CONSUMER x FEATURES MENU_  
Processes the left and right audio channels to achieve a perceived increase in channel separation and spatial effect. Use  
cursor left (<-) and cursor right (+>) to turn this feature on and off.  
AVL (ON / OFF)  
SETUP x CONSUMER x FEATURES MENU_  
Automatic volume leveling restricts the volume variation of audio signals to a relatively small range by boosting low-  
level signals and reducing louder signals, thus maintaining a consistent volume level. Use cursor left (<-) and cursor  
right (+>) to turn this feature on and off.  
* COMMERCIAL FEATURE  
8
3135-125-21331 10/09/02 DFU LO1-2K2 CH1, HC, OCC, PC, PL, TL  
HOW TO USE THE ON-SCREEN MENU (CONTINUED)  
MIN VOLUME / MAX VOLUME* (VOL |||||---- nn)  
SETUP x CONSUMER  
FEATURES MENU_  
Applicable / available only to the Commercial Mode / setup menu. Limits the range throughout which the television’s  
volume can be adjusted by a guest mode remote control, or by the television’s front panel keyboard (provided the front  
panel keyboard has not been locked out, see KEYBOARD LOCK).  
VOLUME BAR (ON / OFF)  
SETUP x CONSUMER  
FEATURES MENU_  
The Volume Bar feature, when set to ON, causes a volume change verification (VOL ||||||---- nn, where nn equals some  
numeric value between 0 - 63) to appear on-screen whenever the volume is adjusted  
SWITCH ON VOLUME* (||||||---- 0 - 63 / STANDARD)  
SETUP x CONSUMER  
FEATURES MENU_  
Applicable / available only to the Commercial Mode / setup menu. This feature determines the television’s volume when-  
ever it is first turned on. A value (0 - 63) can be specified, or default to the television’s volume when last turned off  
(STANDARD).  
POWER ON* (STANDARD / FORCED)  
SETUP x CONSUMER  
FEATURES MENU_  
Applicable / available only to the Commercial Mode / setup menu. POWER ON FORCED means that the television will  
automatically power-up whenever it is supplied with mains power. When POWER ON is set to FORCED, the television  
will remain powered on long as mains power is applied, and cannot be turned off by a guest-mode remote, or by the  
front panel keyboard (even if it is not locked out). POWER ON STANDARD means that the television will not auto-  
matically power-on when mains power is applied.  
CHANNEL DISPLAY* (NUMBER / LABEL / ALL / NONE) SETUP x CONSUMER  
FEATURES MENU_  
Applicable / available only to the Commercial Mode / setup menu. CHANNEL DISPLAY determines the channel infor-  
mation (NUMBER and / or LABEL), if any, that is displayed briefly whenever the channel is changed. Also see LABEL  
in CHANNEL INSTALLATION. Also see REMINDER.  
KEYBOARD LOCK* (ON / OFF)  
SETUP x CONSUMER  
FEATURES MENU_  
Applicable / available only to the Commercial Mode / setup menu. When KEYBOARD LOCK is OFF, the television’s  
front panel keyboard will be accessible, but only to the extent depending upon the MIN VOLUME, MAX VOLUME,  
POWER ON, and CHANNEL INSTALLATION. KEYBOARD LOCK, when ON, completely disables the television’s  
front panel keyboard (Power, Volume -, Volume +, Channel -, Channel +).  
ESP* (OFF / 1 - 99)  
SETUP x CONSUMER  
FEATURES MENU_  
Applicable / available only to the Commercial Mode / setup menu. ESP (Energy Savings Programmability), if not OFF,  
determines the number of hours (1 - 99) the television will remain powered on after the most recent front panel keyboard  
or remote control command. NOTE: If POWER ON (see POWER ON STANDARD / FORCED) is set to FORCED,  
ESP has no effect.  
AUDIO / VIDEO MUTE (OFF / BLACK / BLUE)  
SETUP x CONSUMER x FEATURES MENU_  
AUDIO / VIDEO MUTE, also known as “A/V muting” eliminates annoying “static” and “snow” when no tuner or exter-  
nal signal is present. When set to BLACK or BLUE, sets the screen set to a solid black or blue display, respectively, and  
forces audio to be muted, when no valid tuner / video signal is present at the selected source.  
EXTERNAL AUD/VID OUT (OFF / ON)  
SETUP x CONSUMER x FEATURES MENU_  
To enable the Monitor Out jacks on the rear jack panel, set EXTERNAL AUD/VID to ON. When the Monitor Out jacks  
are enabled, they provide the currently-selected source (tuner or video) signals, UNLESS CVI (COMPONENT VIDEO INPUT)  
VIDEO IS SELECTED. IF CVI is the selected input, no video signal will be present at the Monitor Out video jack.  
When EXTERNAL AUD/VID is set to OFF, no signals will be present at the Monitor Out jacks.  
* COMMERCIAL FEATURE  
9
3135-125-21331 10/09/02 DFU LO1-2K2 CH1, HC, OCC, PC, PL, TL  
HOW TO USE THE ON-SCREEN MENU (CONTINUED)  
WELCOME MESSAGE* (>)  
SETUP x CONSUMER  
FEATURES MENU_  
Applicable / available only to the Commercial Mode / setup menu. The Welcome Message feature makes it possible for  
an on-screen message to appear whenever the television is first turned on. The message will remain until any front-panel  
keyboard command or remote control command is received. The Welcome Message sub-menu is shown below.  
WELCOME MESSAGE  
MESSAGE  
LINE 1  
LINE 2  
CLEAR  
OFF / ON  
(20 characters)  
(20 characters)  
>
>
EXIT  
Use cursor-up and cursor-down to select the Welcome Message sub-menu item. While Line 1 or Line 2 of the Welcome  
Message message is highlighted, use cursor-left and cursor-right to enter message-edit mode and position the cursor with-  
in the line of the message content. Use cursor-up and cursor-down to change the character at the current position. Press  
RECALL on the Setup Remote to exit the editing mode and resume Welcome Message sub-menu item selection.  
> NOTE: WELCOME MESSAGE, when ON, overrides CHANNEL GUIDE at power-on, if the latter has been enabled.  
CHANNEL GUIDE* (OFF / ON / POWER ON)  
SETUP x CONSUMER  
FEATURES MENU_  
Applicable / available only to the Commercial Mode / setup menu. CHANNEL GUIDE provides an on-screen list of all  
channels / inputs currently saved in the channel ring (see CHANNEL INSTALL) and their corresponding labels (see  
CHANNEL INSTALL), for any channels / inputs for which labels have been assigned. When CHANNEL GUIDE is ON,  
the channel guide appears when a remote control CH GDE command is received. When CHANNEL GUIDE is set to  
POWER ON, the channel guide appears when the television is first powered on, as well as when a remote control CH  
GDE command is received. When CHANNEL GUIDE is OFF, the channel guide never appears.  
REMINDER* (OFF / ON)  
SETUP x CONSUMER  
FEATURES MENU_  
The REMINDER feature, when ON, causes the television to constantly display the currently-tuned channel / input and/or  
its label (if one has been assigned, see CHANNEL INSTALLATION) in the upper-left-hand corner of the screen. When  
REMINDER is OFF, the channel number / label will only appear briefly immediately after channel / input is selected.  
NOTE: The REMINDER feature is available in the television’s commercial-mode TV SETUP and CONSUMER menus.  
3-DIGIT ENTRY* (OFF / ON)  
SETUP x CONSUMER  
FEATURES MENU_  
Applicable / available only to the Commercial Mode / setup menu. Determines whether two or three remote-control digit  
commands initiate a channel-tune command. When OFF, tuning will occur upon the reception of two remote-control digit  
commands. When ON, tuning will occur upon the reception of three remote-control digit commands.  
* COMMERCIAL FEATURE  
10  
3135-125-21331 10/09/02 DFU LO1-2K2 CH1, HC, OCC, PC, PL, TL  
SETUP x CONSUMER  
A/CH A/V SWITCH* (OFF / ON)  
FEATURES MENU_  
Available in / applicable to Commercial Setup Menu / Commercial Mode. Alternate channel Audio / Video switching.  
When A/CH A/V SWITCH is OFF, the remote-control A / CH (alternate channel) command causes the television to select  
the channel / input that was selected just prior to the currently-selected one. When A/CH A/V SWITCH is ON, the  
remote-control A / CH (alternate channel) command causes the television to successively switch between all A/V inputs  
currently saved in the Channel Ring and the television’s most-recently-tuned RF channel.  
CC (OFF / CC-1 / CC-2 / CC ON MUTE)  
SETUP x CONSUMER x FEATURES MENU x  
This feature activates closed-captioning mode 1 or mode 2 when CC-1 or CC-2, respectively, is selected. When CC ON  
MUTE is selected, CC-1 is activated when the television receives a remote-control MUTE command.  
SAVE CC* (OFF / ON)  
SETUP x CONSUMER  
FEATURES MENU_  
Applicable / available only to the Commercial Mode / setup menu. When SAVE CC is OFF, the television will always  
power-up with closed-captioning turned off. When SAVE CC is ON, the television “remembers” the most recently-  
selected closed-captioning mode. In other words, the television will always power-up with closed-captioning set to the  
mode to which it was last set.  
V-CHIP MENU ITEM * (OFF / ON)  
SETUP x CONSUMER  
FEATURES MENU_  
Available in / applicable to Commercial Setup Menu / Commercial Mode. Determines whether the V-CHIP SETUP menu  
item appears when the television is in COMMERCIAL MODE and is displaying the FEATURES MENU (see COM-  
MERCIAL MODE / FEATURES MENU).  
SAVE V-CHIP (OFF / ON)  
SETUP x CONSUMER  
FEATURES MENU_  
Available in / applicable to Commercial Setup Menu / Commercial Mode. When SAVE V-CHIP is ON, the television  
“remembers” the most recently-selected V-CHIP configuration. In other words, the television will power-up with V-  
CHIP in the state in which it was last configured.  
V-CHIP SETUP (>)  
SETUP x CONSUMER x FEATURES MENU x  
V-Chip setup menu.  
SLEEPTIMER (OFF / 15 / 30 / 45 / 60 / 90 / 120 / 180 / 240)  
SETUP x CONSUMER x FEATURES MENU x  
Determines the amount of time, in minutes, subsequent to the selection of the specified interval, that the television will  
remain powered-on before automatically powering off.  
SECURITY * (STANDARD / HIGH)  
SETUP x CONSUMER  
FEATURES MENU  
Available in / applicable to Commercial Setup Menu / Commercial Mode. When SECURITY is set to STANDARD,  
access to the television’s Commercial Setup Menu is possible with a guest-mode remote control, by means of the follow-  
ing remote-control keystrokes: 3 1 9 7 5 3 MUTE.  
!NOTE: The SECURITY item itself does not appear when the Commercial Setup Menu is invoked in this manner. This  
feature, as with all Commercial Setup features, can only be changed with a Master Setup Remote.  
* COMMERCIAL FEATURE  
11  
CLEANING & CARE  
·
·
To avoid possible shock hazard, please be sure that the television is unplugged from the electrical outlet before clean-  
ing.  
When cleaning the television screen, take care not to scratch or damage the screen surface (avoid wearing jewelry or  
using anything abrasive). Wipe the front of the screen with a clean cloth dampened with water. Use even, easy, ver-  
tical strokes when cleaning.  
·
Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water. Use a clean  
dry cloth to dry the wiped surfaces.  
·
·
Occasionally vacuum the ventilation holes or slots in the cabinet back.  
Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent mar-  
ring of the cabinet finish.  
END-OF-LIFE DISPOSAL  
·
This Philips Institutional Television product and its packaging contain materials that can be recycled and re-used.  
Specialized companies can recycle your product to increase the amount of reusable materials and minimize the  
amounts which need to be properly disposed.  
·
·
This product might also use batteries which should not be thrown away when depleted, but should be handed in and  
disposed of as small chemical waste.  
Please find out about the local regulations regarding the disposal of the television, batteries, and packaging materi-  
als whenever you replace existing equipment.  
INDEX  
A
O
A/CH A/V SWITCH . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
OPERATIONAL MODE. . . . . . . . . . . . . . . . . . . . . . . . . 3  
OXYGEN EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . 2  
OXYGEN-ENRICHED ATMOSPHERE . . . . . . . . . . . . 2  
P
AUDIO / VIDEO MUTE. . . . . . . . . . . . . . . . . . . . . . . . . 9  
C
CHANNEL DISPLAY. . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
CHANNEL GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
CHANNEL INSTALL . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
CHANNEL RING (NON-HC MODELS) . . . . . . . . . . . . 7  
CHANNELINSTALL . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
COMMERCIAL MODE. . . . . . . . . . . . . . . . . . . . . . . . . 3, 5  
CONSUMER MODE. . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
CURRENT RING (HC MODELS ONLY) . . . . . . . . . . . 7-8  
D
PENDANT CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . 2  
PHILIPS INSTITUTIONAL TV SOFTWARE. . . . . . . . . 3  
POWER ON (STANDARD / FORCED). . . . . . . . . . . . 9  
R
RC2524BK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
RC2573GR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
RC2573GR SETUP REMOTE . . . . . . . . . . . . . . . . . . . 4  
RG4172BK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
RG4172BK SETUP REMOTE . . . . . . . . . . . . . . . . . . . 4  
RL9820B GUEST REMOTE. . . . . . . . . . . . . . . . . . . . . 4  
S
DCM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
E
ESP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
EXTERNAL AUD / VID OUT . . . . . . . . . . . . . . . . . . . . 9  
F
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . 2  
SAVE CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
SECURITY (STANDARD / HIGH). . . . . . . . . . . . . . . . 11  
SETUP MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
SWITCH ON VOLUME. . . . . . . . . . . . . . . . . . . . . . . . . 9  
W
FEATURES MENU. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
FRONT PANEL CONTROLS . . . . . . . . . . . . . . . . . . . . 6  
H
HC MODELS, ADDITIONAL NOTE . . . . . . . . . . . . . . . 2  
HOW TO USE THE ON-SCREEN MENU . . . . . . . . . . 7  
K
WELCOME MESSAGE . . . . . . . . . . . . . . . . . . . . . . . 10  
KEYBOARD LOCK. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
M
MENU ITEM SUMMARY . . . . . . . . . . . . . . . . . . . . . . . 5  
MIN VOLUME / MAX VOLUME . . . . . . . . . . . . . . . . . 9  
12  

IBM THINKCENTRE 8124 User Manual
Intel GA 8N SLI PRO User Manual
Intel MB884 User Manual
JVC AV 2103YE User Manual
NEC AccuSync AS90 User Manual
NEC LCD71V User Manual
Palsonic 6827G User Manual
Panasonic TX 68PS13A User Manual
Philips 55PFL3907 User Manual
Philips DVP5140K User Manual