Philips PDCC JS JW 0731 User Manual

MCD728  
DVD MicroTheatre  
Register your product and get support at  
Index  
English ------------------------------------------------7  
------------------------------------------------- 42  
3
Disc Operations  
IMPORTANT!  
Region Codes  
– Depending on the DVD orVIDEO CD,  
some operations may be different or  
restricted.  
– Do not push on the disc tray or put  
any objects other than disc on the disc  
tray. Doing so may cause the disc player  
malfunction.  
– If the inhibit icon (ø) appears on the  
TV screen when a button is pressed, it  
means the function is not available on  
the current disc or at the current time.  
DVDs must be labeled as shown below in order  
to play on this DVD system.You cannot play  
discs that are labeled for other regions.  
ALL  
6
Note:  
– If you are having trouble playing a certain disc,  
remove the disc and try a different one. Improper  
formatted disc will not play on this DVD Player.  
Playable Discs  
Playing discs  
Your DVD Player will play:  
– DigitalVideo Discs (DVDs)  
– Video CDs (VCDs)  
– SuperVideo CDs (SVCDs)  
– DigitalVideo Discs + Rewritable (DVD+RW)  
– Compact Discs (CDs)  
1 Connect the power cords of the system andTV  
(or any optional stereo or AV receiver) to a  
power outlet.  
2 Turn on theTV power and set to the correct  
Video In channel. (See “Setting up theTV”).  
Picture (Kodak, JPEG) files on CDR(W)  
3 Press STANDBY-ON B on the DVD Player  
front panel or B on the remote.  
– DivX(R) disc on CD-R(W):  
– DivX 3.11, 4.x and 5.x  
– WMA  
You should see the blue Philips DVD  
background screen on theTV.  
– Supported MP3-CD format.  
ISO 9660  
4 Press OPEN•CLOSE ç to open the disc tray  
and load in a disc, then press the same button  
again to close the disc tray.  
Max. title/album name –12 characters  
Max. title number plus album is 255.  
Max. nested directory is 8 levels.  
The max. album number is 32.  
The max. MP3 track number is 999.  
Supported sampling frequencies for MP3 disc:  
32 kHz, 44.1 kHz, 48 kHz.  
Make sure the label side is facing up.  
5 Playback will start automatically (depending on  
the disc type).  
If a disc menu appears on theTV, seeUsing  
the Disc Menu”.  
If the disc is locked by parental control, you  
must enter your four-digit password. (See  
PASSWORD SETUP PAGE”).  
Supported Bit-rates of MP3 disc are: 32, 64,  
96, 128, 192, 256 (kbps).  
– Following formats can’t be supported  
The files like *.VMA, *.AAC, *.DLF, *.M3U,  
*.PLS, *.WAV  
Non-English Album/Title name  
The discs recorded under Joliet format  
MP3 Pro and MP3 with ID3 tag  
6 At any time, simply press PRESET -/ 9 to stop  
playback.  
23  
Disc Operations  
Resuming playback from the last  
stopped point (DVD/VCD/CD)  
Using the Disc Menu  
Depending on the disc, a menu may appear on  
theTV screen once you load the disc.  
In stop mode and when a disc has not been  
removed, pressÉÅ.  
To select a playback feature or item  
To cancel resume mode  
Use 1 2 3 4and OK or Numeric Keypad  
(0-9) on the remote.  
In stop mode, press PRESET -/ 9 again.  
Playback will start automatically.  
Zoom (DVD/VCD/DivX/JPEG)  
To access or exit from the menu  
Zooming allows you to enlarge or reduce the  
video image during playback.  
Press DISC MENU on the remote.  
1 Press ZOOM repeatedly to enlarge or reduce  
ForVCD with Playback Control (PBC)  
feature (version 2.0 only)  
the playback video image.  
2 Press 1 2 3 4to pan across theTV screen.  
PBC playback allows you to playVideo CDs  
interactively, following the menu on the display.  
Repeat (DVD/VCD/CD/MP3/DivX/  
WMA)  
During playback, press DISC MENU.  
If PBC was ON, it will switch to OFF and  
continue playback.  
For DVD/VCD/CD  
If PBC was OFF, it will switch to ON and  
return to menu screen.  
Press MODE repeatedly to choose a repeat  
mode during playback.  
Chapter (DVD)  
– to repeat playback of the current chapter.  
Basic playback controls  
Pausing playback (DVD/VCD/CD/MP3/  
DivX/WMA)  
Track (CD/VCD)/Title (DVD)  
– to repeat playback of the current track (CD/  
SVCD/VCD)/title (DVD).  
1 During playback, press ÉÅ.  
All  
Playback will pause and sound will be muted.  
– to repeat playback of all the disc.  
2 Press ÉÅagain to resume.  
Shuffle  
– to repeat playback at random order.  
Selecting a track/chapter/title (DVD/  
VCD/DivX/CD)  
For MP3/WMA/DivX  
Press MODE continuously to access different  
repeat modes.  
1 Press during playback to go to the next  
chapter/track  
Shuffle: play all files in the selected folder in  
random order.  
2 Press ¡ to go to the previous chapter/track.  
Repeat One: play an MP3/WMA file  
repeatedly.  
Repeat All: play all files repeatedly.  
Off: switches off the shuffle or repeat mode.  
3 To go directly to any chapter/track/title, enter the  
chapter/track/title number using the Numeric  
Keypad (0-9).  
24  
Disc Operations  
For MP3/WMA  
Repeat A-B (DVD/VCD/CD/MP3/DivX/  
WMA)  
1 In Stop mode, press DISC MENU to switch  
the menu between Album and Filelist.  
1 Press A-B at your chosen starting point.  
2 When Filelist is on the screen, press 3 4to  
select the files and press PROGRAM to add  
the files to the program list.  
2 Press A-B again at your chosen end point.  
The section A and B can be set only within  
the same chapter/track.  
The section will now repeat continuously.  
3 Press DISC MENU to display the program list.  
3 To exit the sequence, press A-B again.  
4 Press PROGRAM to delete unwanted files  
from the program list.  
Slow Motion (DVD/VCD)  
Forward/Reverse Searching (DVD/VCD/  
DivX/CD/MP3/WMA)  
1 Press SLOW during playback to select the  
required speed: 1/2, 1/4, 1/8 or 1/16 (backward  
or forward).  
1 Press 1 2on the remote during playback to  
select the required speed: 2X, 4X, 8X, 16X or  
32X (backward or forward).  
Sound will be muted.  
2 To return to normal speed, press ÉÅ.  
Sound will be muted.  
Note:  
2 To return to normal speed, press ÉÅ.  
– Slow backward is not possible onVCDs.  
Time search & search by chapter/track  
number (DVD/VCD/CD/MP3/WMA)  
Program (not for Picture CD)  
To select favourite tracks/chapters for playback in  
preferred sequence.  
1 Press GOTO/STEREO until the time or  
chapter/track edit box appears.  
2 Enter hours, minutes and seconds from left to  
right in the time edit box using remote control  
numerical keypad.  
For DVD/VCD/CD  
OR  
Enter your desired chapter/track number in the  
chapter/track edit box using remote control  
numerical keypad.  
Information display during playback  
(not for Picture CD)  
During playback, press DISPLAY to show disc  
information on theTV screen.  
(DVD program for example)  
1 Press PROGRAM on the remote control to  
For DVD  
enter the program mode.  
Title/Chapter Elapsed: displays the  
elapsed time of the current title/chapter.  
Title/Chapter Remain: displays the  
remaining time of the current title/chapter.  
Display Off: switches time display off.  
2 Use the Numerical Keypad (0-9) to directly  
input the tracks or chapters (single track number  
with digit “0” in front, for example “05”).  
3 Move the cursor by pressing 1 2 3 4to  
select START.  
4 Press OK to start playback.  
25  
Disc Operations  
For SuperVCD/VCD/DivX/CD  
Single/Total Elapsed: displays the elapsed  
time of the current single/total track.  
Single/Total Remain: displays the  
remaining time of the current single/total track.  
Display Off: switches time display off.  
Playing MP3/WMA disc  
IMPORTANT!  
For DRM protectedWMA files, use  
Windows Media Player 10 (or later) for  
CD burning/conversion.Visit  
Windows Media Player andWM DRM  
(Windows Media Digital Rights  
Management).  
Special disc features  
Playing aTitle (DVD)  
1 Press DISC MENU.  
General operation  
The disc title menu appears on theTV screen.  
1 Load an MP3/WMA disc.  
The data disc menu appears on theTV  
screen.  
2 Use 1 2 3 4 or Numeric Keypad (0-9) to  
select a play option.  
3 Press OK to confirm.  
2 Use 3 4to select an album and press OK to  
open the album.  
Camera Angle (DVD)  
Press ANGLE repeatedly to select different  
desired angle.  
Changing the Audio Language (for  
DVD recorded with multiple languages)  
Press AUDIO repeatedly to select different  
audio languages.  
Changing the Audio Channel (forVCD  
only)  
3 Press 3 4or use the Numeric Keypad (0-9)  
Press AUDIO to select the available audio  
channels provided by the disc (Mono Left, Mono  
Right or Stereo).  
to highlight a track.  
4 Press OK to confirm.  
The playback will start from the selected  
track to the end of the album.  
Subtitles (DVD)  
Press SUBTITLE repeatedly to select different  
subtitle languages.  
Note:  
– The disc reading time may exceed 10 seconds  
due to large number of songs compiled onto the  
disc.  
Playing MP3/WMA/JPEG Picture  
CD  
Playback selection  
IMPORTANT!  
You have to turn on yourTV and set to  
the correctVideo In channel. (See  
“Setting up theTV”).  
During playback, you can:  
Press ¡ / to select another track in the  
current album.  
Press ÉÅrepeatedly to pause/resume playback.  
Press DISC MENU on the remote to switch  
between Album and Filelist.  
26  
Disc Operations  
To enter the remote key function menu  
Use 1 2 3 4to highlight “Menu” and press  
OK.  
Playing JPEG Picture CD  
General operation  
1 Load a JPEG Picture CD.  
The data disc menu appears on theTV  
screen.  
2 Use 3 4 to select a folder and press OK to  
open the folder.  
3 Press 3 4 or use the Numeric Keypad (0-9)  
to highlight a picture file.  
4 Press OK to confirm.  
The playback will start from the selected  
picture to the end of the folder.  
To display the other pictures on the  
previous/next page  
Playback selection  
Press ¡ / .  
During playback, you can:  
Use 1 2 3 4to highlight “Prev” or “Next” and  
Press ¡ / to select another file in the current  
folder.  
press OK.  
Zoom picture (JPEG)  
Use 1 2on the remote to rotate/flip the  
picture files.  
During playback, press ZOOM repeatedly to  
display the picture with different scales.  
Press ÉÅrepeatedly to pause/resume playback.  
Use 1 2 3 4to view the zoomed picture.  
Press DISC MENU on the remote to switch  
between Folder and Filelist.  
Playback with multi-angles (JPEG)  
Special JPEG features  
During playback, press 1 2 to rotate the  
picture on theTV screen.  
1: rotate the picture anti-clockwise.  
2: rotate the picture clockwise.  
Preview function (JPEG)  
This function shows the content of the current  
folder or the whole disc.  
1 Press PRESET- / 9 during playback.  
Thumbnails of 12 pictures appears on theTV  
screen.  
2 Use 1 2 3 4to highlight one of the pictures/  
”Slide Show” and press OK to start playback/  
slide show.  
27  
Disc Operations  
Playing a DivX disc  
This DVD player supports the DivX movie  
playback that you download from your  
computer onto a CD-R/RW (see “System Menu  
Options-DIVX(R)VOD registration code” for  
more information).  
1 Load a DivX disc.  
Playback will start automatically. If not press  
ÉÅ.  
2 If the DivX movie contains external subtitles, the  
subtitle menu will appear on theTV screen for  
your selection.  
In this case, pressing SUBTITLE on the remote  
control will turn on or off the subtitle.  
If multilingual subtitles are embedded on the  
DivX disc, pressing SUBTITLE will change the  
subtitle language during playback.  
Note:  
– Subtitle files with the following filename  
extensions (.srt, .smi, .sub, .ssa, .ass) are supported  
but do not appear on the file navigation menu.  
– The subtitle filename have to be the same as  
the filename of the movie.  
28  
System Menu Options  
Basic operations  
TV DISPLAY  
1 Press SYSTEM MENU to enter the Setup  
Set the aspect ratio of the DVD Player according  
to theTV you have connected.  
Menu.  
NORMAL/PS: If you have a normalTV and  
want both sides of the picture to be trimmed or  
formatted to fit yourTV screen.  
2 Press 1 2 to select a page to be set.  
3 Press 3 4 to highlight an option.  
4 Enter its submenu by pressing 2or OK.  
5 Move the cursor by pressing 3 4 to highlight  
the selected item.  
In cases of value setting, press 1 2to adjust  
values.  
4:3 NORMAL/LB: If you have a normalTV.  
In this case, a wide picture with black bands on  
the upper and lower portions of theTV screen  
will be displayed.  
6 Press OK to confirm.  
To return to the upper-level menu  
Press 1 or OK (in cases of value adjustment).  
To exit from the menu  
Press SYSTEM MENU again.  
The settings will be stored in the player’s  
memory even if the player is switched off.  
WIDE: If you have a wide-screenTV.  
Note:  
– Some of the features in the System Menu  
Options are described in “Getting Started”.  
OSD LANGUAGE  
GENERAL SETUP PAGE  
SeeGetting Started-Step 3: Setting language  
preference”.  
The options included in GENERAL SETUP PAGE  
are:TV DISPLAY,OSD LANGUAGE”,  
“SCREEN SAVER”and “DIVX CODE”.  
SCREEN SAVER  
This function is used to turn the screen saver on  
or off.  
ON: In STOP, PAUSE or No DISC mode, if  
no actions are performed about 3 minutes, the  
screen saver will be activated.  
OFF: Screen saver is disabled.  
29  
System Menu Options  
DIVX CODE  
ANALOG AUDIO SETUP  
Philips provides you the DivX® VOD (Video On  
Demand) registration code that allows you to  
rent and purchase videos using the DivX® VOD  
service.  
The options included in ANALOG AUDIO  
SETUP page are:LT/RT”,“STEREO”,DVS  
REFER. MODE” and “DVS WIDE MODE”.  
vod.  
1 In ‘GENERAL SETUP PAGE’, press 3 4to  
highlight DIVX Code, then press 2or OK to  
ener its submenu and press OK again to  
confirm.  
ANALOG AUDIO SETUP PAGE  
DOWNMIX  
LT/RT  
STEREO  
DVS REFER. MODE  
DVS WIDE MODE  
The registration code will appear.  
LT/RT: Selects the mixed sound output  
mode.  
STEREO: Selects the ordinary stereo sound  
output.  
DVS REFER MODE: Creates a highly  
compelling 5.1-channel listening environment  
similar to a small and well-damped room.  
DVSWIDE MODE: Creates a highly  
compelling 5.1-channel listening environment  
similar to a larger room.  
2 Press OK to exit.  
3 Use the registration code to purchase or rent  
the videos from DivX® VOD service at  
download the video onto a CD-R for playback  
on this DVD player.  
SPDIF SETUP  
The options included in SPDIF SETUP page are:  
“SPDIF OFF”,SPDIF/RAW” and “SPDIF/PCM”.  
Notes:  
– All the downloaded videos from DivX® VOD can  
only be played back on this DVD player.  
– Time search feature is not available during  
DivX movie playback.  
AUDIO SETUP PAGE  
The options included in AUDIO SETUP PAGE  
are:“ANALOG AUDIO SETUP”,SPDIF  
SETUP”,“DOLBY DIGITAL SETUP”,3D  
PROCESSING”,HDCD” and “NIGHT MODE”.  
SPDIF OFF:Turns off the SPDIF output.  
SPDIF/RAW: If you have connected your  
DIGITAL OUT (COAXIAL or OPTICAL) to a  
multi-channel decoder/receiver.  
SPDIF/PCM: Only if your receiver is not  
capable of decoding multi-channel audio.  
ANALOG AUDIO SETUP  
3D PROCESSING  
30  
System Menu Options  
HDCD  
DOLBY DIGITAL SETUP  
The option included in HDCD (High Definition  
Compatible Digital) is: “FILTER”.  
The option included in DOLBY DIGITAL SETUP  
is:DUAL MONO”.  
DUAL MONO  
FILTER  
Sets the audio output cutoff frequency point  
when playing an HDCD disc.  
Select the setting that matches the number of  
speakers you have connected.  
OFF, 44.1K and 88.2K.  
STEREO: Left mono sound will send output  
signals to Left speaker and Right mono sound  
will send output signals to Right speaker.  
L-MONO: Left mono sound will send  
output signals to Left speaker and Right speaker.  
R-MONO: Right mono sound will send  
output signals to Left speaker and Right speaker.  
NIGHT MODE  
In this mode, the high volume outputs are  
softened and low volume outputs are brought  
upward to an audible level. It is useful for  
watching your favourite action movie without  
disturbing others at night.  
ON: Select this to level out the volume.This  
feature is only available for movies with Dolby  
Digital mode.  
3D PROCESSING  
The option included in 3D PROCESSING page  
is: “REVERB MODE”.  
OFF: Select this when you want to enjoy the  
surround sound with its full dynamic range.  
VIDEO SETUP PAGE  
The options included in VIDEO SETUP PAGE  
are:“COMPONENT”,“TV MODE”,PICTURE  
SETTING” and “HDMI SETUP”.  
REVERB MODE  
Reverb mode provides a virtual surround sound  
experience using just two speakers.  
OFF, CONCERT,LIVING ROOM,  
HALL, BATHROOM, CAVE, ARENA and  
CHURCH.  
PICTURE SETTING  
COMPONENT  
Sets the video output according to your video  
connection.This setting is not required if you are  
using the VIDEO jack (yellow) to connect the  
31  
System Menu Options  
SHARPNESS  
DVD micro system to yourTV.  
Adjusts the sharpness level.  
HIGH, MEDIUM and LOW.  
S-VIDEO: Select this if you have connected  
the DVD micro system to yourTV using S-Video  
jack.  
Pr/Cr Pb/CbY: Select this if you have  
connected the DVD micro system to yourTV  
using Component video jacks.  
BRIGHTNESS  
Adjusts the brightness level. Range: -20-+20.  
CONTRAST  
Adjusts the contrast level. Range: -16-+16.  
Notes:  
GAMMA  
– When the player is set toY Pb Pr (YUV), some  
TV may not properly synchronise with the player  
on the SCART connector.  
– This option is available only when the "HDMI"  
is set to "OFF".  
Adjusts the gamma level.  
HIGH, MEDIUM, LOW and NONE.  
HUE  
Adjusts the hue level. Range: -9-+9.  
SATURATION  
Adjusts the saturation level. Range: -9-+9.  
TV MODE  
LUMA DELAY  
Adjusts the luma delay.  
0T and 1T.  
Selects interlace or P-SCAN video output mode  
when Pr/Cr Pb/CbY is selected.  
P-SCAN and INTERLACE.  
In the progressive scan mode, you can enjoy the  
high quality picture with less flickers. It only  
works when you have connected the DVD  
player'sY Pb Pr jacks to yourTV that supports  
the progressive video input. Otherwise, a  
distorted picture will appear on theTV. For  
proper progressive scan set up, see “Getting  
started-Setting up Progressive Scan feature”.  
HDMI SETUP  
The options included in HDMI SETUP Page are:  
"HDMI" and "RESOLUTION".  
HDMI  
This option is used to enable/disable HDMI  
output.  
ON: Enables HDMI output.  
OFF: Disables HDMI output.  
Note:  
– This option is available only when the "HDMI"  
is set to "OFF".  
RESOLUTION  
You can select the resolution of the picture  
according to your preference and the connected  
HDMITV.  
The resolution options include 480p (60Hz),  
720p (60Hz), 1080i (60Hz), 576p (50Hz), 720p  
(50Hz) and 1080i (50Hz).  
PICTURE SETTING  
This menu helps you to set the video quality.  
1 Press 3 4 to highlight “PICTURE SETTING”.  
2 Press 2 or OK to enter PICTURE SETTING.  
The options included in PICTURE SETTING  
page are:“SHARPNESS”,BRIGHTNESS”,  
“CONTRAST”,“GAMMA”,“HUE”,  
Notes:  
– This option is available only when the "HDMI"  
is set to "ON".  
“SATURATION” and “LUMA DELAY”.  
– If no display appears on theTV screen due to  
unsupported resolution, reconnect any available  
interlace video output to your display and re-adjust  
the resolution settings to 480p/576p.  
32  
System Menu Options  
DVDs that are rated above the level you  
selected will not play unless you enter your four-  
digit password and choose a higher level rating.  
PREFERENCE PAGE  
The options included in Preference page are:“TV  
TYPE”,“AUDIO”,SUBTITLE”,“DISC MENU”,  
“PARENTAL”,“DEFAULT” and “PASSWORD  
SETUP”.  
Note:  
– Some DVDs are not encoded with a rating  
though the movie rating may be printed on the  
Disc cover.The rating level feature does not work  
for such Discs.  
Rating explanations  
1 KID SAF  
– Kids material; recommended especially for  
children and viewers of all ages.  
Note:  
2 G  
– Preference features can be selected only when  
no disc is in the player or when playback has  
stopped completely.  
– General Audience; recommended as  
acceptable for viewers of all ages.  
3 PG  
PARENTAL  
– Parental Guidance suggested.  
4 PG 13  
Some DVDs may have a parental level assigned  
to the complete disc or to certain scenes on the  
disc.This feature lets you set a playback limitation  
level.  
– Material is unsuitable for children under age  
13.  
5-6 PGR, R  
– Parental Guidance - Restricted;  
recommended that parents restrict children  
under 17 from viewing or allow to view only  
when supervised by a parent or adult guardian.  
The rating levels are from 1 to 8 and are  
country dependent.You can prohibit the playing  
of certain discs that are not suitable for your  
children or have certain discs played with  
alternative scenes.  
7 NC-17  
– No children under age 17; not recommended  
viewing for children under age 17.  
8 Adult  
– Mature materials; should be viewed only by  
adults due to graphic sexual material, violence or  
language.  
VCD, SVCD and CD have no level indication, so  
parental control function has no effect on those  
kinds of discs.This applies to most illegal DVD  
discs.  
1 Press 3 4 to highlight “PARENTAL”.  
2 Enter its submenu by pressing 2.  
3 Use 3 4 to highlight a rating level for the disc  
inserted.  
33  
System Menu Options  
3 Press OK to open the page for inputting a new  
DEFAULT  
password.  
Setting the “DEFAULT” function will reset all  
options and your personal settings to the factory  
defaults and all your personal settings will be  
erased.  
Caution!  
– When this function is activated, all  
settings will be reset to factory defaults.  
PASSWORD SETUP  
4 Enter the existing 4-digit code.  
The options included in Password Setup page  
are:“PASSWORD MODE” and “PASSWORD”.  
5 Enter the new 4-digit code.  
6 Enter the new 4-digit code a second time to  
confirm.  
The new 4-digit code will take effect.  
7 Press OK to exit.  
Notes:  
– If the password has been changed, the parental  
and disc lock code will also be changed.  
– The default password (1234) is always active  
even the password has been changed.  
PASSWORD MODE  
This feature is used to enable/disable password  
by selecting “ON”/”OFF”.  
PASSWORD  
Enter your four digit password when a hint is  
displayed on the screen.The default password is  
1234.  
1 Press 3 4 to highlight “PASSWORD”.  
2 Enter its submenu by pressing 2.  
34  
Other Functions  
Listening to preset radio stations  
Radio Reception  
Tuning to radio stations  
In tuner mode, press PRESET+/- (or ¡ / on  
the remote control) to select the desired preset  
number.  
The preset number, radio frequency, and  
waveband are displayed.  
1 Press STANDBY-ON B (B on the remote  
control) to switch on the last selected source.  
2 Press SOURCE (TUNER on the remote  
control) to selectTUNER mode.  
Setting the clock  
3 Press and hold ¡ / (1 / 2on the remote  
control) until the frequency indication starts to  
change, then release.  
1 In Standby mode, press and hold CLOCK on  
the remote until the time flashes on the display.  
CLOCK SET” is displayed briefly.Then, the  
hour digits flash on the display screen.  
The system automatically tunes to the next  
strong radio station.  
To tune to a weak station, press ¡ / (1 / 2  
on the remote control) briefly and repeatedly  
until an optimal reception is found.  
2 Turn VOLUME -/+ clockwise or anticlockwise  
or press VOL +/- on the remote to set the  
hours.  
4 Repeat Step 3 if necessary until you find the  
3 Press CLOCK to confirm.  
desired radio station.  
The minute digits flash on the display screen.  
Presetting radio stations  
4 Turn VOLUME -/+ clockwise or anticlockwise  
or press VOL +/- on the remote to set the  
minutes.  
You can preset up to 20 stations regardless of  
the reception.  
5 Press CLOCK again to confirm the clock  
Automatic progamming  
setting.  
Press PROGRAM on the remote control for  
more than two seconds to activate  
programming.  
Notes:  
– This system only supports 24-hour mode.  
– The clock setting will be erased when the  
system is disconnected from the power supply.  
– The system will exit clock setting mode if no  
button is pressed within 30 seconds.  
All available stations are programmed.  
Manual progamming  
1 Tune to your desired radio station (refer to  
Tuning to radio stations”).  
2 Press PROGRAM on the remote control.  
PROG” icon flashes.  
3 Press PRESET+/- (or ¡ / on the remote) to  
select the desired preset number.  
If “PROG” icon goes off before you select the  
desired preset number, press PROGRAM on  
the remote control.  
4 Press PROGRAM on the remote again to  
store the radio station.  
Repeat steps 1-4 to store other radio stations.  
35  
Other Functions  
Setting sleep/wake-up timer  
5 Press SLEEP/TIMER to confirm the time  
setting.  
Sleep timer setting  
OFF” flashes on the display screen.  
In power-on mode, the sleep setting enables  
the system to switch to standby mode  
automatically at a preset time.  
6 Turn VOLUME -/+ clockwise or anticlockwise  
or press VOL -/+ on the remote to select  
“ON”.  
1 In power-on mode, press SLEEP/TIMER on  
the remote repeatedly to select a preset time.  
The selections are as follows (time in  
minutes):  
icon appears on the display screen.  
To deactivate the timer  
SelectOFF” at Step 6.  
00 10 20 30 40 50 60 70  
80 90 00  
2 When you reach the desired length of time, stop  
pressing SLEEP/TIMER.  
appears.  
To deactivate the sleep timer  
Press SLEEP/TIMER repeatedly until00” is  
displayed, or press STANDBY-ON B (B on  
the remote).  
In standby mode, the timer setting enables  
the system to switch on automatically at a set  
time.  
Wake-up timer setting  
IMPORTANT!  
– Before setting the timer, ensure that  
the clock is set correctly.  
1 Press and hold SLEEP/TIMER until the time  
flashes on the display.  
TIMER SET” scrolls.Then, the hour digits  
flash on the display screen.  
2 Turn VOLUME -/+ clockwise or anticlockwise  
or press VOL -/+ on the remote to set the  
hours.  
3 Press SLEEP/TIMER to confirm.  
The minute digits flash on the display screen.  
4 Turn VOLUME -/+ clockwise or anticlockwise  
or press VOL -/+ on the remote to set the  
minutes.  
36  
Specifications  
SYSTEM  
SPEAKER  
Total output power.............................................. 400W  
Power supply ........................................... 220V / 50 Hz  
Rated working power consumption (1/8 rated  
output power) ........................................................ 85W  
AUX input sensitivity ..................................... 500mV  
Channel Separation ............................................. 40dB  
Distortion ....................................................................... 0.7%  
Front Speakers  
Impedance........................................................................ 4 Ω  
Input power.................................................................. 75W  
Sensitivity .............................................................. 80 4dB  
Frequency response ................................ 80Hz-16kHz  
Dimensions . 150 (W) x 323 (H) x 150 (D) mm  
Weight ............................................................... 2.4 kg each  
DVD  
Subwoofer  
Frequency response 100Hz-20kHz (+0.5/-2 dB)  
Video output ................................................................1VP-P  
HDMI 480p (60Hz), 720p (60Hz), 1080i (60Hz),  
576p (50Hz), 720p (50Hz), 1080i (50Hz)  
Horizontal definition................................... 500 (TV)  
Dimensions ...............................................................................  
....................... 232 (W) x 75.5 (H) x 223.5 (D) mm  
Weight.......................................................................... 2.3 kg  
Subwoofer (not magnetically shielded design).....  
................................................................................................ 6.5”  
Impedance........................................................................ 8 Ω  
Input power................................................................150W  
Dimensions (w x h x d) ....................................................  
..................................... 430 mm x 262 mm x 292 mm  
Weight............................................................................ 4.4 kg  
REMOTE  
AMPLIFIER  
Distance...............................................................................6m  
Angle ............................................................................... 300  
Rated output power (THD = 10%) ..........................  
........................................ 2x75W (4) + 150W (8)  
Frequency response 100Hz-20kHz (+0.5/-2 dB)  
S/N Ratio ................................................................... 60dB  
Loaded impedance ..................................................... 4 Ω  
Dimensions ...............................................................................  
....................... 232 (W) x 75.5 (H) x 223.5 (D) mm  
Weight....................................................................... 4.35 kg  
Specifications subject to change without  
prior notice  
TUNER  
FM Frequency range.......................... 87.5-108 MHz  
FM Noise limit sensitivity .......................... 20µV/M  
FM S/N........................................................................ 46dB  
37  
Troubleshooting  
WARNING  
Under no circumstances should you try to repair the system yourself, as this will  
invalidate the warranty. Do not open the system as there is a risk of electric shock.  
If a fault occurs, first check the points listed below before taking the system for repair. If you  
are unable to remedy a problem by following these hints, consult your dealer or Philips for  
help.  
Problem  
Solution  
No power.  
Check if the AC power cord is properly  
connected.  
Press STANDBY-ON B on the top of the  
DVD micro system or B on the remote to turn  
on the power.  
Check if theTV is switched on.  
Check the video connection.  
Press SOURCE on the top of the DVD player  
repeatedly to selectDVD” or press DISC on  
the remote.  
No picture.  
Set yourTV to the correctVideo In channel.This  
channel is usually near channel 00. Or, you may  
have a button on theTV remote control that  
selects Auxiliary or A/V IN channel. See yourTV  
owner’s manual for details. Or, change channels  
at theTV until you see DVD screen on theTV.  
If the progressive scan feature is activated but  
the connectedTV does not support progressive  
signals or the cables are not connected  
accordingly, see “Getting started-Setting up  
Progressive Scan feature” for proper progressive  
scan setup or deactivate the progressive scan  
feature as below:  
1)Turn off yourTV progressive scan mode or  
turn on to interlaced mode.  
2) Press SYSTEM MENU on the remote to exit  
the system menu and then DISC and “1” to exit  
progressive scan.  
Distorted or poor picture.  
Sometimes a small amount of picture distortion  
may appear.This is not a malfunction.  
Clean the disc.  
Completely distorted picture or black/  
white picture.  
TV has a colour system standard. If the disc’s or  
DVD system’s colour system is different than  
yourTV’s colour system, the picture may be  
distorted or colourless.  
38  
Troubleshooting  
The aspect ratio of the screen cannot be  
changed even though you have set theTV  
shape.  
The aspect ratio is fixed on the DVD disc.  
Depending on theTV, it may not be possible to  
change the aspect ratio.  
No sound or distorted sound.  
Adjust the volume.  
Check that the speakers are connected  
correctly.  
Replace the speaker cables.  
Disconnect the headphones.  
The system is in pause, slow motion or fast  
forward/reverse mode, pressÉÅ to resume  
normal play mode.  
The micro DVD player does not start  
playback.  
Insert a readable disc with the playback side  
facing down.  
Check the disc type, colour system and regional  
code. Check for any scratches or smudges on  
the disc.  
Press SYSTEM MENU to turn off the setup  
menu screen.  
Cancel the parental control rating function or  
change the rating level.  
Moisture has condensed inside the system.  
Remove the disc and leave the system turned  
on for about an hour.  
Disconnect the power plug from the outlet and  
insert again.  
The DVD micro system does not  
respond when the buttons are pressed.  
Multi-language sound or subtitle is not  
recorded on the DVD.  
Changing the language for the sound or subtitle  
is prohibited on the DVD.  
Cannot activate some features, such as  
Angles, Subtitles, or multi-language  
Audio.  
The features may not be available on the disc.  
Considerable noise in radio broadcasts.  
Tune in to the correct frequency.  
Connect the antennas.  
Fully extend the FM wire antenna. Position for  
best reception and secure to a wall.  
Connect an outdoor FM antenna.  
Adjust the direction and position for best  
reception.  
Place the antenna farther away from any  
equipment that may be causing the noise.  
Increase the distance between the system and  
yourTV or other equipment.  
39  
Troubleshooting  
The remote control does not function.  
Select the correct source (DISC orTUNER, for  
example) before pressing the function button.  
Point the remote control at the remote sensor  
of the unit.  
Reduce the distance to the player.  
Remove any possible obstacles.  
Replace the batteries with new ones.  
Check that the batteries are loaded correctly.  
The display is dark.  
Press DIM again.  
Low hum or buzz sound.  
Place the DVD micro system as far away as  
possible from electrical devices that may be  
causing interference.  
Check all speakers for correct polarity.  
Low bass response.  
Unable to select Progressive Scan.  
Check that the output of the video signal is  
switched to 'Pr/Cr Pb/CbY'.  
Check the connection between theTV and the  
HDMI jack of the DVD player.  
See if theTV supports this 480p/576p/720p/  
1080i DVD player.  
No sound is output from the HDMI jack.  
Check yourTV system setup correctly.  
40  
Glossary  
Parental control: A function of the DVD to  
limit playback of the disc by the age of the users  
according to the limitation level in each country.  
The limitation varies from disc to disc; when it is  
activated, playback will be prohibited if the  
software’s level is higher than the user-set level.  
PCM (Pulse Code Modulation): A system  
for converting analog sound signal to digital  
signal for later processing without data  
compression.  
Playback control (PBC): Refers to the signal  
recorded on video CDs or SVCDs for  
reproduction control. By using screen menus  
recorded on aVideo CD or SVCD that supports  
PBC, you can enjoy interactive-type software as  
well as software having a search function.  
Progressive Scan (P-Scan): It displays all the  
horizontal lines of a picture at one time, as a  
signal frame. This system can convert interlaced  
video from DVD into progressive format for  
connection to a progressive display. It  
dramatically increases the vertical resolution. A  
progressive scanTV set is needed to receive  
progressive scan output from the system.  
Region code: A system allowing discs to be  
played only in preset regions.This unit will only  
play discs that have compatible region codes.You  
can find the region code of your unit from the  
product label. Some discs are compatible with  
more than one region (or ALL regions).  
S-Video: Produces a clear picture by sending  
separate signals for luminance and the color.You  
can use S-Video only if yourTV set has S-Video  
In jack.  
Sampling Frequency: Frequency of data  
sampling when analog data is converted to  
digital data. Sampling frequency numerically  
represents how many times the original analog  
signal is sampled per second.  
Surround: A system for users to create  
realistic three-dimensional sound fields full of  
realism by arranging multiple speakers around  
the listener.  
Title: The longest section of a picture or music  
feature on DVD, music, etc., in video software, or  
the entire album in audio software. Each title is  
assigned a title number enabling you to locate  
the title you want.  
Analog: Sound that has not been turned into  
numbers.Analog sound varies, while digital sound  
has specific numerical values.These jacks send  
audio through two channels, the left and right.  
Aspect ratio: The ratio of vertical and  
horizontal sizes of a displayed image.The  
horizontal vs. vertical ratio of conventionalTVs. is  
4:3, and that of wide-screens is 16:9.  
AUDIO OUT Jacks: Jacks on the back of the  
DVD System that send audio to another system  
(TV set, Stereo, etc.).  
Bit Rate: The amount of data used to hold a  
given length of music; measured in kilobits per  
second, or kbps. Or, the speed at which you  
record. Generally, the higher the bit rate the  
better the sound quality. However, higher bit  
rates use more space on a Disc.  
Chapter: Sections of a picture or a music  
piece on a DVD that are smaller than titles.A  
title is composed of several chapters. Each  
chapter is assigned a chapter number enabling  
you to locate the chapter you want.  
ComponentVideo Out Jacks: Jacks on the  
back of the DVD System that send high-quality  
video to aTV set that has ComponentVideo In  
jacks (R/G/B, Y/Pb/Pr, etc.).  
Disc menu: A screen display prepared for the  
selection of images, sound, subtitles, multi-angles,  
etc recorded on a DVD.  
Digital: Sound that has been converted into  
numerical values. Digital sound is available when  
you use the DIGITAL AUDIO OUT COAXIAL  
or OPTICAL jacks.These jacks send audio  
through multiple channels, instead of just two  
channels as analog does.  
Dolby Digital: A surround sound system  
developed by Dolby Laboratories containing up  
to six channels of digital audio (front left and  
right, surround left and right and center).  
JPEG: A still-picture data compression system  
proposed by the Joint Photographic Expert  
Group, which features small decrease in image  
quality in spite of its high compression ratio.  
MP3: A file format with a sound data  
compression system,MPEis the abbreviation of  
Motion Picture Experts Group 1 (or MPEG-1)  
Audio Layer 3.Through the MP3 format, one  
CD-R or CD-RW can contain about 10 times as  
much data volume as a regular CD can.  
Multichannel: DVD is specified to have all  
sound tracks constitute one sound field.  
Multichannel refers to a structure of sound  
tracks having three or more channels.  
VIDEO OUT jack: Jack on the back of the  
DVD System that sends video toTV.  
HDMI: High Definition Multimedia Interface. A  
specification developed by the HDMI Working  
Group that combines multi-channel audio and  
high definition video and that controls signals  
into a single digital interface for use with DVD  
players, digital television, and other audiovisual  
devices.  
41  
Language Code  
Abkhazian  
Afar  
Afrikaans  
Amharic  
6566  
6565  
6570  
6577  
6582  
7289  
6583  
6569  
6589  
6590  
7783  
6665  
6669  
6678  
6672  
6673  
7866  
6683  
6682  
6671  
7789  
6983  
6765  
6772  
6769  
Inupiaq  
Irish  
Íslenska  
Italiano  
Ivrit  
Japanese  
Javanese  
Kalaallisut  
Kannada  
Kashmiri  
Kazakh  
Kernewek  
Khmer  
7375  
7165  
7383  
7384  
7269  
7465  
7486  
7576  
7578  
7583  
7575  
7587  
7577  
8287  
7589  
7586  
7579  
Pushto  
8083  
8285  
8185  
8277  
8279  
8278  
8377  
8371  
8365  
8367  
8382  
8378  
8381  
8368  
8373  
8373  
8376  
8379  
8384  
7882  
8385  
7073  
8387  
8383  
8386  
8476  
8489  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8483  
8478  
8482  
8475  
8487  
8571  
8575  
8582  
8590  
8673  
8679  
8765  
6789  
8779  
8872  
8973  
8979  
9085  
Russian  
Quechua  
Raeto-Romance  
Romanian  
Rundi  
Samoan  
Sango  
Sanskrit  
Sardinian  
Serbian  
Shona  
Arabic  
Armenian  
Assamese  
Avestan  
Aymara  
Azerhaijani  
Bahasa Melayu  
Bashkir  
Belarusian  
Bengali  
Bihari  
Bislama  
Bokmål, Norwegian  
Bosanski  
Brezhoneg  
Bulgarian  
Burmese  
Castellano, Español  
Catalán  
Chamorro  
Chechen  
Chewa; Chichewa;Nyanja7889  
9072  
Chuang; Zhuang  
Church Slavic; Slavonic 6785  
Chuvash  
Corsican  
Česky  
Shqip  
Sindhi  
Kinyarwanda  
Kirghiz  
Komi  
Sinhalese  
Slovensky  
Slovenian  
Somali  
Sotho; Southern  
South Ndebele  
Sundanese  
Suomi  
Swahili  
Swati  
Svenska  
Tagalog  
Tahitian  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga (Tonga Islands)  
Tsonga  
Tswana  
Türkçe  
Turkmen  
Twi  
Uighur  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapuk  
Walloon  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Korean  
Kuanyama; Kwanyama 7574  
Kurdish  
Lao  
Latina  
Latvian  
Letzeburgesch;  
Limburgan; Limburger 7673  
Lingala  
Lithuanian  
Luxembourgish;  
Macedonian  
Malagasy  
Magyar  
Malayalam  
Maltese  
Manx  
Maori  
Marathi  
Marshallese  
Moldavian  
Mongolian  
Nauru  
Navaho; Navajo  
Ndebele, North  
Ndebele, South  
Ndonga  
Nederlands  
Nepali  
Norsk  
Northern Sami  
North Ndebele  
Norwegian Nynorsk;  
Occitan; Provencal  
Old Bulgarian;Old Slavonic 6785  
Oriya  
Oromo  
Ossetian; Ossetic  
Pali  
Panjabi  
Persian  
Polski  
Português  
7585  
7679  
7665  
7686  
7666  
7678  
7684  
7666  
7775  
7771  
7285  
7776  
7784  
7186  
7773  
7782  
7772  
7779  
7778  
7865  
7886  
7868  
7882  
7871  
7876  
7869  
7879  
8369  
7868  
7878  
7967  
9065  
6786  
6779  
6783  
6865  
6869  
6890  
6978  
6979  
6984  
6985  
6976  
7079  
7082  
7089  
7074  
Dansk  
Deutsch  
Dzongkha  
English  
Esperanto  
Estonian  
Euskara  
ꢀꢁꢁꢂꢃꢄꢅꢆ  
Faroese  
Français  
Frysk  
Fijian  
Gaelic; Scottish Gaelic 7168  
Gallegan  
Georgian  
Gikuyu; Kikuyu  
Guarani  
Gujarati  
Hausa  
Herero  
Hindi  
Hiri Motu  
Hrwatski  
Ido  
7176  
7565  
7573  
7178  
7185  
7265  
7290  
7273  
7279  
6779  
7379  
7982  
7977  
7983  
8073  
8065  
7065  
8076  
8084  
Interlingua (International)7365  
Interlingue  
Inuktitut  
7365  
7385  
4
Contents  
General Information  
Disc Operations  
Features .................................................................. 7  
Supplied accessories ............................................ 7  
Environment information ................................... 7  
Installation .............................................................. 8  
Maintenance .......................................................... 8  
Playable Discs ...................................................... 23  
Region Codes...................................................... 23  
Playing discs ......................................................... 23  
Using the Disc Menu ......................................... 24  
Basic playback controls .............................. 24~26  
Pausing playback  
Selecting a track/chapter/title  
Resuming playback from the last stopped point  
Zoom  
Repeat  
RepeatA-B  
Slow Motion  
Program  
Forward/Reverse Searching  
Time search & search by chapter/track number  
Information display during playback  
Special disc features ........................................... 26  
Playing a Title  
Connections  
Step 1: Placing the speakers and subwoofer  
.................................................................................. 9  
Step 2:Connecting speakers............................ 10  
Step 3:Connecting the control cable ............ 10  
Step 4:ConnectingTV ................................ 10~12  
Step 5: Connecting FM antenna ...................... 13  
Step 6:Connecting the power cord............... 13  
Additional: Connecting additional equipment ...  
......................................................................... 13~14  
Camera Angle  
Changing the Audio Language  
Changing the Audio Channel  
Subtitles  
Playing MP3/WMA/JPEG Picture disc ............ 26  
Playing MP3/WMA disc ..................................... 26  
General operation  
Functional Overview  
DVD player and power amplifier .................... 15  
Remote control ........................................... 16~17  
Playback selection  
Playing JPEG Picture CD................................... 27  
General operation  
Playback selection  
Special JPEG features ......................................... 27  
Preview function  
Zoom picture  
Getting Started  
Step 1:Inserting batteries into the Remote  
Control ................................................................. 18  
Using the Remote Control to operate the Player  
Step 2:Setting up theTV ........................... 18~19  
Selecting the colour system that corresponds to  
yourTV  
Playback with multi-angles  
Playing a DivX disc ............................................. 28  
Setting up Progressive Scan feature  
To deactivate Progressive manually  
Step 3:Setting language preference ................ 20  
Setting the OSD Language  
Setting theAudio, Subtitle and Disc Menu language  
Basic Functions  
Switching the system on/off ............................. 21  
Switching the system to Eco Power Standby  
mode ..................................................................... 21  
Power-saving automatic standby ..................... 21  
Volume control ................................................... 21  
Sound control .............................................. 21~22  
DBB (Dynamic Bass Boost)  
DSC (Digital Sound Control)  
LOUDNESS  
DVS  
Dimming the display screen ............................. 22  
Demonstration mode........................................ 22  
5
Contents  
System Menu Options  
Basic Operations ................................................ 29  
GENERAL SETUP PAGE ........................... 29~30  
TV DISPLAY  
OSD LANGUAGE  
SCREEN SAVER  
DIVX CODE  
AUDIO SETUP PAGE ................................ 30~31  
ANALOGAUDIO SETUP  
SPDIF SETUP  
DOLBY DIGITAL SETUP  
3D PROCESSING  
HDCD  
NIGHT MODE  
VIDEO SETUP PAGE ................................. 31~32  
COMPONENT  
TV MODE  
PICTURE SETTING  
HDMI SETUP  
PREFERENCE PAGE.......................................... 33  
PARENTAL  
DEFAULT  
PASSWORD SETUP PAGE ............................. 34  
PASSWORD MODE  
PASSWORD  
Other Functions  
Radio reception .................................................. 35  
Tuning to radio stations  
Presetting radio stations  
Listening to preset radio stations  
Setting the clock ................................................. 35  
Setting sleep/wake-up timer ............................ 36  
Sleep timer setting  
Wake-up timer setting  
Specifications ........................................... 37  
Troubleshooting ............................. 38~40  
Glossary......................................................... 41  
6
General Information  
Note:  
Congratulations on your purchase and welcome  
to Philips!  
– To fully enjoy the progressive scan feature, you  
need a progressive scanTV.  
To fully benefit from the support that Philips  
welcome.  
Supplied accessories  
– Remote control with two AAA batteries  
– FM wire antenna  
– Composite video cable (yellow)  
– Control cable  
– Power cord  
– 2 front speakers including 2 speaker  
cables  
– 1 passive subwoofer including 1 subwoofer  
cable  
Features  
Your DVD MicroTheatre with 2.1 channel full  
digital amplifier creates the same dynamic sound  
qualities that you find in full-fledged cinemas and  
incorporates some of the best features in home  
theater technology.  
– This instruction booklet and a Quick Start  
Guide  
Other features include:  
Built-in Dolby Digital decoder, supporting DSC  
sound setting.  
If any item is damaged or missing, contact  
your retailer or Philips.  
Additional Component Connections  
Lets you connect other audio and audio/visual  
components to the DVD micro theatre.  
Environmental information  
All unnecessary packaging has been omitted.We  
have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene (bags,  
protective foam sheet).  
Night mode  
Lets you compress the dynamic range, reducing  
the difference in loudness between different  
sounds in Dolby Digital mode.  
Parental Control (Rating Level)  
Lets you set a ratings level so that your children  
cannot watch a DVD that has a rating higher  
than you set.  
Your system consists of materials which can be  
recycled and reused if disassembled by a  
specialised company. Please observe the local  
regulations regarding the disposal of packaging  
materials, exhausted batteries and old  
equipment.  
Sleep/Wake-upTimer  
Enables the system to switch on/off automatically  
at a preset time.  
Progressive Scan  
Provides high quality flicker-free images for film  
based sources.When a picture refreshes, its  
vertical resolution can double to 525 lines.  
7
General Information  
Installation  
Place the player on a flat, hard, and stable surface.  
In a cabinet, allow about 10cm (4 inches) of free  
space all around the player for adequate  
ventilation.  
Do not expose your player to extreme  
temperatures or humidity.  
The apparatus shall not be exposed to dripping  
or splashing.  
No objects filled with liquids, such as vases, shall  
be placed on the apparatus.  
No naked flame sources, such as lighted candles,  
shall be placed on the apparatus.  
Install this unit near the AC outlet and where the  
AC power plug can be reached easily.  
The ventilation should not be impeded by  
covering the ventilation openings with items,  
such as newpapers, table-cloths, curtains, et.  
Maintenance  
When a disc becomes dirty,  
clean it with a cleaning cloth.  
Wipe the disc from the center  
out, in a straight line.  
Do not expose the player,  
batteries or discs to humidity,  
rain, sand or excessive heat  
(caused by heating equipment or direct sunlight).  
Always keep the disc tray closed to avoid dust  
on the lens.  
Do not use solvents such as benzene, thinner,  
commercially available cleaners, or anti-static  
spray intended for colour discs.  
The lens may cloud over when the player is  
suddenly moved from cold to warm  
surroundings, making it impossible to play a disc.  
Leave the player in the warm environment until  
the moisture evaporates.  
8
Connections  
AC Power  
FM  
antenna  
Speaker  
(right)  
Speaker  
(left)  
Subwoofer  
Step 1: Placing the speakers and  
subwoofer  
IMPORTANT!  
– The type plate is located at the  
bottom of the system.  
– Before connecting the AC power cord  
to the wall outlet, ensure that all  
other connections have been made.  
– Never make or change any  
Front  
speaker  
( left )  
Front  
speaker  
( right )  
connections with the power switched on.  
VIEWING AREA  
1 Place the front left and right speakers at equal  
distances from theTV set and at an angle of  
approximately 45 degrees from the listening  
position.  
2 Place the subwoofer on the floor near theTV.  
Notes:  
– To avoid magnetic interference, do not position  
the front speakers too close to yourTV set.  
– Allow adequate ventilation around the DVD  
System.  
9
Connections  
Step 2: Connecting speakers  
Step 3: Connecting the control  
cable  
1 Connect the speaker wires to the SPEAKERS  
terminals, right speaker to FRONT (4) R and  
left speaker to FRONT (4) L. Fully insert the  
connectors on the cables into the terminals and  
fasten the hooks to ensure firm connection.  
Connect the serial port marked “CONTROL  
CABLE” at the rear of the DVD player to the  
same port at the rear of the power amplifier  
with the supplied flat control cable.  
Step 4: ConnectingTV  
IMPORTANT!  
You only need to make one video  
connection from the following options,  
depending on the capabilities of yourTV.  
– Connect the DVD system directly to  
theTV.  
2 Connect the passive subwoofer to the  
SUBWOOFER (8) terminal with the  
supplied subwoofer cable by matching the plug  
types.  
Using CompositeVideo jack  
Notes:  
– Ensure that the speaker cables are correctly  
connected. Improper connections may damage the  
system due to short-circuit.  
– For optimal sound performance, use the  
supplied speakers.  
– Do not connect more than one speaker to any  
one pair of +/- speaker jacks.  
– Do not connect speakers with an impedance  
lower than the speakers supplied. Please refer to  
the SPECIFICATIONS section of this manual.  
1 Use the composite video cable (yellow) to  
connect the system's VIDEO jack to the video  
input jack (or labelled as A/V In,Video In,  
Composite or Baseband) on theTV set.  
2 To listen to theTV channels through this DVD  
system, use the audio cables (white/red-not  
supplied) to connect AUX IN L/R jacks to the  
corresponding AUDIO OUT jacks on theTV.  
10  
Connections  
Using ComponentVideo jacks (Y Pb Pr)  
Using S-Video jack  
IMPORTANT!  
IMPORTANT!  
– The progressive scan video quality is  
only possible when usingY Pb Pr, and a  
progressive scanTV is required.  
– If S-Video is used for DVD playback  
connection, the systemsVIDEO OUT  
setting will need to be changed  
accordingly.  
1 Use component video cables (red/blue/green -  
not supplied) to connect the DVD system's  
COMPONENT (Pr/Cr Pb/CbY) jacks to  
the corresponding Component video input jacks  
(or labeled asY Pb/Cb Pr/Cr orYUV) on theTV.  
1 Use an S-Video cable (not supplied) to connect  
the DVD system’s S-VIDEO jack to the S-  
Video input jack (or labeled asY/C or S-VHS) on  
theTV.  
2 To listen to theTV channels through this DVD  
system, use the audio cables (white/red-not  
supplied) to connect AUX IN L/R jacks to the  
corresponding AUDIO OUT jacks on theTV.  
2 To listen to theTV channels through this DVD  
system, use the audio cables (white/red-not  
supplied) to connect AUX IN L/R jacks to the  
corresponding AUDIO OUT jacks on theTV.  
3 If you are using a Progressive ScanTV (TV must  
indicate Progressive Scan or ProScan capability),  
to activateTV Progressive Scan, please refer to  
yourTV user manual. For DVD system  
Progressive Scan function, see “Getting Started-  
Setting up Progressive Scan feature”.  
Note:  
– If yourTV does not support Progressive Scan, you  
will not be able to view the picture.  
Press SYSTEM MENU on the remote to exit the  
system menu and then DISC and “1” to exit  
progressive scan.  
11  
Connections  
Using an accessory RF modulator  
Step 5: Connecting FM antenna  
1 Connect the supplied FM antenna to the FM (75  
) jack. Extend the FM antenna and fix its end to  
the wall.  
IMPORTANT!  
– If yourTV only has a single Antenna In  
jack (labeled as 75 ohm or RF In), you  
will need an RF modulator in order to  
view DVD playback on theTV. See your  
electronics retailer or contact Philips for  
details on RF modulator availability and  
operations.  
For better FM stereo reception, connect an  
external FM antenna (not supplied).  
Note:  
– Adjust the position of the antennas for optimal  
reception.  
– Position the antennas as far as possible from  
yourTV,VCR or other radiation source to prevent  
unwanted interference.  
1 Use the composite video cable (yellow) to  
connect the DVD system’s VIDEO jack to the  
video input jack on the RF modulator.  
2 Use an RF coaxial cable (not supplied) to  
connect ANTENNA OUT orTOTV jack on the  
RF modulator to the Antenna IN jack on theTV.  
3 Connect the Antenna or CableTV service signal  
to the ANTENNA IN or RF IN jack on the RF  
modulator. (It may have been connected to your  
TV previously. Disconnect it from theTV.)  
12  
Connections  
Step 6: Connecting the power  
cord  
Viewing and listening to the playback of  
other equipment A  
Connect the system's AUX IN L/R jacks to the  
AUDIO OUT jacks on the other audio/visual  
device (such as aTV,VCR, Laser Disc player or  
cassette deck).  
Before starting operation, press SOURCE on  
the front panel to select AUX or press AUX on  
the remote in order to activate the input source.  
After everything is connected properly,  
plug in the AC power cord to the power  
outlet.  
Never make or change any connection with the  
power switched on.  
Additional: Connecting  
additional equipment  
Using theVCR for recording DVDs B  
Connect one of the system's VIDEO jack to the  
correspondingVIDEO IN jack and AUDIO  
OUT L/R jacks to the AUDIO IN jacks on the  
VCR.This will allow you to make analogue stereo  
(two channel, right and left) recordings.  
IMPORTANT!  
– Some discs are copy-protected.You  
cannot record the disc through aVCR or  
digital recording device.  
– When making connections, make sure  
the colour of cables matches the colour  
of jacks.  
– Always refer to the owner’s manual of  
the other equipment for complete  
connection and usage details.  
Recording (digital) C  
Connect the system's COAXIAL or  
OPTICAL jack to the DIGITAL IN jack on a  
digital recording device.  
Before starting operation, set the DIGITAL OUT  
according to the audio connection. (See  
"DIGITAL OUT".)  
Connecting an active subwoofer D  
Connect the DVD micro system's  
SUBWOOFER jack to the AUDIO INPUT  
jack on an active subwoofer (not supplied).  
13  
Connections  
Connecting to aTV with HDMI Jack E  
HDMI connects untouched and uncompressed  
digital transmission for the highest and crispest  
sound/image quality.  
It has plug and play capability using only one  
cable for both audio/video output.  
Use a HDMI cable (not supplied) to connect the  
HDMI jack on the DVD Player to HDMI IN  
on a HDMI compatible device (e.g.;TV, Projector,  
Adaptor).  
It may take a while for the DVD player and  
input device to communicate and initialise.  
Playback starts automatically.  
E
HDTV  
HDIN  
HDMI IN  
Notes:  
– Proceed to "Setup Menu Options" "VIDEO  
SETUP PAGE" "HDMI SETUP" for detailed  
HDMI setup.  
– If you are using the HDMI as audio source  
make sure that "DIGITAL OUTPUT" is set to "PCM  
only" (see "Setup Menu Options" "AUDIO  
SETUP PAGE" "DIGITAL AUDIO SETUP").  
– To stop sound output from yourTV after making  
the HDMI connection, make sure that "DIGITAL  
OUTPUT" is set to "SPDIF OFF" (see "Setup Menu  
Options" "AUDIO SETUP PAGE" "DIGITAL  
AUDIO SETUP").  
14  
Functional Overview  
1
2
734 7  
8 5 6  
!
9
0
7 ¡/™  
DVD player and power amplifier  
Disc:  
1 STANDBY-ON B  
skips to the previous/next chapter/title/track.  
switches the system on or to standby mode.  
Tuner:  
2 Display  
tunes to a higher/lower radio frequency.  
press and hold, then release the key to  
start automatic search for a radio frequency  
downward/upward.  
shows the current status of the DVD player.  
3 ÉÅ  
starts or interrupts disc playback.  
4 PRESET +  
8 OPEN•CLOSE ç  
in tuner mode, selects a preset radio station  
forward.  
opens or closes the disc tray.  
switches the system on.  
5 PRESET-/9  
9 SOURCE  
stops disc playback or erases a program.  
in tuner mode, selects a preset radio station  
backward.  
selects the respective sound source: DVD/AUX/  
TUNER.  
switches the system on.  
in Demo mode (on the system only), activates/  
deactivates the demonstration.  
0 IR SENSOR  
point the remote control towards this sensor.  
6 MOVING SPEAKERS  
! VOLUME -/+  
enables/disables the surround sound effect with  
moving speakers.  
adjusts the volume upward/downward.  
adjusts the hours and minutes in clock/timer  
setting mode.  
switches the set timer ON or OFF.  
15  
Functional Overview  
4 DISPLAY  
displays information onTV screen during  
playback  
Remote control  
1 B  
switches the system on or to standby mode.  
5 MODE  
selects various repeat modes or the shuffle play  
mode for a disc.  
6 A-B  
2 0  
opens or closes the disc compartment  
3 DISC/TUNER/AUX  
repeats playback of a specific section on a disc.  
selects the respective sound source for DVD/  
AUX/TUNER.  
exits P-SCAN (progressive scan). (Only for  
DISC)  
7 DIM  
selects different levels of brightness for the  
display screen.  
8 SLOW  
selects different slow playback modes for a  
DivX/VCD/SVCD/DVD.  
9 SYSTEM MENU (disc mode only)  
enters or exits the system menu.  
1
3
2
4
0 DISC MENU (disc mode only)  
DVD/VCD: enters or exits the disc contents  
menu.  
VCD2.0: switches the playback control mode on  
or off .  
5
6
9
8
7
0
@
MP3/WMA: switches between Album and Filelist.  
!
#
$
! 4 / 3 / 2 / 1  
selects an item in a menu.  
º
moves an enlarged picture up/down/left/right.  
(2/ 1;Tuner) tunes to a higher/lower radio  
frequency.  
(2/ 1;Tuner) press and hold, then release the  
key to start automatic search for a radio  
frequency downward/upward.  
ª
%
^
§
(2/ 1; Disc) searches backward/forward in a  
disc at different speeds.  
&
@ OK  
confirms a selection.  
*
£
¡
)
(
16  
Functional Overview  
CLOCK  
Standby mode  
# ZOOM  
DVD/VCD/Picture CD: enlarges or reduces a  
picture or active image on theTV screen.  
sets the system clock.  
$ ¡ / ™  
Playback mode  
Disc: skips to the previous/next chapter/title/  
displays the system clock.  
track  
§ DBB  
to select the desired DBB level (DBB ON or  
DBB OFF).  
Tuner: selects a preset radio station.  
% ÉÅ  
starts or interrupts disc playback.  
DSC  
selects different types of preset sound equalizer  
^ 9  
stops disc playback or erases a program.  
settings (FLAT, POPS, JAZZ, CLASSIC or  
ROCK).  
& LOUDNESS  
enables or disables automatic loudness  
adjustment.  
VOL +/-  
adjusts the volume upward/downward.  
adjusts the hours and minutes in clock/timer  
setting mode.  
* Numeric Keypad (0-9)  
inputs a track/title/chapter number of the disc.  
switches the set timer ON or OFF.  
( PROGRAM  
ª MUTE  
DVD/VCD/CD: enters the program menu.  
MP3/WMA-CD: adds/deletes a programmed  
track to/from the program list.  
disables or enables sound output.  
º MOVING SPEAKERS  
Tuner: programs preset radio stations.  
enables/disables the surround sound effect with  
moving speakers.  
) GOTO/STEREO  
Disc: fast searches in a disc by entering a time,  
title, chapter or track.  
RDS (unavailable for this version)  
for tuner, displays RDS information.  
FM: sets stereo or mono sound mode.  
¡ ANGLE  
selects a DVD camera angle.  
AUDIO  
forVCD/DivX  
sets Stereo, Mono-Left or Mono-Right sound  
mode.  
for DVD  
selects an audio language.  
£ SUBTITLE  
selects a subtitle language.  
Notes for remote control:  
– First, select the source you wish to  
control by pressing one of the source select  
keys on the remote control (DISC or  
TUNER, for example).  
SLEEP/TIMER  
Standby mode  
sets time for switching on the system  
automatically.  
– Then select the desired function ( 2;, í,  
ë for example).  
Power-on mode  
sets the sleep timer function (auto off).  
17  
Getting Started  
2 Turn on theTV and set to the correct video-in  
channel.You should see the blue Philips DVD  
background screen on theTV.  
Step 1: Inserting batteries into  
the Remote Control  
Usually these channels are between the  
lowest and highest channels and may be called  
FRONT,A/V IN, orVIDEO. See yourTV manual  
for more details.  
Or, you may go to channel 1 on yourTV, then  
press the Channel down button repeatedly until  
you see theVideo In channel.  
3
1
2
Or, theTV Remote Control may have a  
button or switch that chooses different video  
modes.  
Or, set theTV to channel 3 or 4 if you are  
using an RF modulator.  
1 Open the battery compartment.  
2 Insert two AAA batteries following the  
indications (+/-) inside the compartment.  
3 Close the cover.  
Using the Remote Control to operate  
the Player  
Selecting the colour system that  
corresponds to yourTV  
1 Aim the Remote Control  
directly at the remote sensor  
(IR) on the front panel.  
This DVD Player is compatible with both NTSC  
and PAL. In order for a DVD disc to play on this  
Player, the colour system of the Disc, theTV and  
the DVD Player should match.  
2 Do not put any objects  
between the Remote Control  
and the DVD Player while  
operating the DVD Player.  
1 Press SYSTEM MENU in full stop mode.  
2 Press 1 2 to select “PREFERENCE PAGE”.  
3 Use 1 2 3 4 on the remote to navigate in  
the menu.  
CAUTION!  
Remove batteries if  
Move to “TVTYPE” and press 2.  
they are exhausted or if the Remote  
Control is not being used for a long time.  
Do not use old and new or different  
types of batteries in combination.  
Batteries contain chemical substances,  
so they should be disposed of properly.  
PAL: Select this if the connectedTV is PAL  
system. It will change the video signal of a NTSC  
disc and output in PAL format.  
Auto: Select this if the connectedTV is  
compatible with both NTSC and PAL (multi-  
system).The output format will be in accordance  
with the video signal of the disc.  
NTSC: Select this if the connectedTV is  
NTSC system. It will change the video signal of a  
PAL disc and output in NTSC format.  
Step 2: Setting up theTV  
IMPORTANT!  
Make sure you have completed all the  
necessary connections. (See  
“ConnectingTV”).  
4 Select an item and press OK.  
Notes:  
1 Switch the DVD system on and then select DISC  
– This option is available only when the "HDMI" is  
set to "OFF".  
source. (See “Switching the system on/off”).  
– Before changing the currentTVType setting,  
ensure that yourTV supports the selectedTVType.  
18  
Getting Started  
Setting up Progressive Scan feature (for  
Progressive ScanTV only)  
9 Turn on yourTV progressive scan mode (refer to  
yourTV user manual).  
The below menu appears on theTV.  
The progressive scan display twice the number  
of frames per seconds than interlaced scanning  
(ordinary normalTV system).With nearly double  
the number of lines, progressive scan offers  
higher picture resolution and quality.  
IMPORTANT!  
Before enabling the progressive scan  
feature, you must ensure:  
1)YourTV can accept progressive signals, a  
progressive scanTV is required.  
2)You have connected the DVD player to your  
TV usingY Pb Pr (see “Connections-Step 4:  
ConnectingTV- Using ComponentVideo jacks”.)  
0 Press 1 2to highlight “OK” in the menu and  
press OK to confirm.  
The setup is complete now and you can start  
enjoy the high quality picture.  
1 Turn on yourTV.  
To deactivate Progressive manually  
2 Turn off yourTV progressive scan mode or turn  
on interlaced mode (refer to yourTV user  
manual).  
When the distorted sign still appears on  
theTV, it may be due to the connectedTV  
does not accept progressive signals, and  
progressive is set by mistake.You must reset the  
unit to interlace format.  
3 Press STANDBY-ON B (B on the remote)  
to turn on the DVD player.  
4 Select the correctVideo Input channel.  
The DVD background screen appears on the  
TV.  
1 Turn off yourTV progressive scan mode or turn  
on to interlaced mode (refer to yourTV user  
manual).  
5 Press SYSTEM MENU.  
2 Press SYSTEM MENU on the remote control  
to exit the system menu and then DISC and “1”  
to exit progressive scan.  
6 Press 1 2 repeatedly to select "VIDEO SETUP  
PAGE”.  
The DVD blue background screen will appear  
on theTV.  
7 Select "TV MODE" to "P-SCAN", then OK to  
confirm.  
The instruction menu appears on theTV.  
Note:  
– During normal playback in the progressive scan  
mode, pressing DISC button and “1” will exit the  
progressive scan mode.  
8 Press 1 2 to highlight “OK” in the menu and  
press OK to confirm.  
There will be a distorted picture on your  
TV at this state until you turn on the  
progressive scan mode on yourTV.  
19  
Getting Started  
Setting the Audio, Subtitle and Disc  
Menu language  
Step 3: Setting language  
preference  
You can select your own preferred language  
settings.This DVD system will automatically  
switch to the selected language whenever you  
load a disc. If the language selected is not  
available on the disc, the disc’s default language  
will be used instead.The OSD language in the  
system menu will remain once selected.  
Setting the OSD Language  
1 Press SYSTEM MENU in stop mode.  
2 Press 1 2to selectPREFERENCE PAGE”.  
3 Press 3 4to highlight the following in the  
Preference Page.  
– “AUDIO” (disc’s soundtrack)  
– “SUBTITLE” (disc’s subtitles)  
– “DISC MENU” (disc’s menu)  
4 Enter its submenu by pressing 2.  
5 Select a language and press OK.  
1 Press SYSTEM MENU.  
6 Repeat steps 3~5 for other language settings.  
2 Press 1 2 to selectGENERAL SETUP PAGE”.  
3 Use 1 2 3 4on the remote to navigate in the  
To exit from the menu  
menu.  
Press SYSTEM MENU again.  
Move to “OSD LANGUAGE” and press 2.  
4 Select a language and press OK.  
To exit from the menu  
Press SYSTEM MENU again.  
20  
Basic Operations  
DSC (Digital Sound Control)  
Switching the system on/off  
DSC provides a different type of preset sound  
equalizer setting.  
Press STANDBY-ONB (B on the remote).  
HELLO” is displayed briefly.The system will  
switch to the last selected source.  
Press DSC on the system or remote control  
repeatedly to select: FLAT, POPS, JAZZ, CLASSIC  
or ROCK.  
Press DISC, TUNER or AUX on the remote.  
The system will switch to the selected source.  
LOUDNESS  
To switch the system to standby mode  
Press STANDBY-ONB (Bon the remote).  
BYE BYE” is displayed briefly.The interactive  
sound settings, last selected source and tuner  
presets will be retained in the player’s memory.  
LOUDNESS feature enables the system to  
automatically increase the treble and bass sound  
effect at low volume (the higher the volume, the  
lower the treble and bass increase).  
Press LOUDNESS on the remote control to  
Power-saving automatic standby  
As a power-saving feature, the system will  
automatically switch to Standby mode if you do  
not press any buttons within 15 minutes after a  
disc has stopped playing.  
enable or disable LOUDNESS feature.  
icon appears/disappears after this feature  
is enabled/disabled.  
DVS  
DVS (DolbyVirtual Speaker) technology creates  
a highly compelling 5.1-channel listening  
experience from as few as two speakers, making  
it an ideal entertainment solution for locations  
where space for multiple speaker setup is limited.  
DVS feature enables you to switch between the  
surround sound mode and ordinary music  
mode.  
Volume control  
Turn VOLUME (-/+) clockwise or anticlockwise  
(or press VOL +/- on the remote) to increase  
or decrease the volume level.  
VOL XX” is displayed on the display panel.  
XX” denotes the volume level.  
To switch off the volume temporarily  
Surround mode  
Music mode  
Press MUTE on the remote.  
Playback will continue without sound and  
MUTING” flashes.  
To activate sound reproduction, you can:  
– press MUTE again;  
– adjust the volume controls;  
– change source.  
Press MOVING SPEAKES to switch between  
the surround sound mode and ordinary music  
mode.  
Sound control  
DBB, DSC, LOUDNESS and DVS sound  
features cannot be activated at the same  
time.  
When the surround sound mode is enabled,  
a “DVS” icon will appear on the display panel and  
the top parts of the left and right front speakers  
will swivel sideways to achieve the moving  
surround effect.  
DBB (Dynamic Bass Boost)  
DBB enhances the bass response.  
When the surround sound mode is disabled,  
the “DVS” icon will disappear from the display  
panel and the top parts of the left and right front  
speakers will return to their previous positions  
to resume the ordinary music mode.  
Press DBB on the remote repeatedly to select  
DBB ON or DBB OFF.  
Some discs might be recorded in high  
modulation, which causes a distortion at high  
volume. If this occurs, switch off DBB or reduce  
the volume.  
21  
Basic Operations  
Note:  
– See “System Menu Options-AUDIO SETUP  
PAGE-ANALOG AUDIO SETUP” for more DVS  
setup options.  
Dimming the display screen  
Press DIM repeatedly to select different levels of  
brightness for the display screen.  
Demonstration mode  
The system has a demonstration mode that  
shows the various features offered by the system.  
To activate the demonstration  
In standby mode, press PRESET–/9 on the  
system to activate the demo mode.  
Demonstration will begin.  
To deactivate the demonstration  
Press PRESET–/9 on the system again.  
DEMO OFF” is displayed.  
Note:  
– Even if you remove the AC power cord and  
reconnect it to the wall socket, the demonstration  
will remain off until you activate it again.  
22  
Meet Philips at the Internet  
MCD728  
CLASS 1  
LASER PRODUCT  
Printed in China  
PDCC-JS-JW-0731  

IOGear GPEN200N User Manual
Kentrox AI296 User Manual
LG Electronics Computer Monitor M4210LCBA User Manual
Miele KM 406 User Manual
NEC MultiSync LCD1765 User Manual
NEC MultiSync XP29 XM29 Xtra User Manual
Paradyne Computer Hardware SNMP DSU User Manual
Philips 200BW8EB User Manual
Philips 200XW7EB User Manual
Philips DVP522 User Manual