Philips MCD705 User Manual

MCD 705  
Quick Start Guide  
What’s in the Box?  
You should find these items upon opening the box.  
Composite video and audio  
Remote control with two  
AAA batteries  
4XSpeaker stands and wall  
brackes with screws  
cables  
(yellow, white, red)  
PRO  
Quick Start Guide  
1
User Manual  
2
Quick start guide  
User manual  
FM and MW antennas  
Control Cable  
Setting the clock  
1
In standby mode, press and hold CLOCK on the remote.  
2
When the hour digits flash, turn VOLUME-/+ on the system or press VOLUME+/- on the  
remote to set the hours.  
3
Press CLOCK again and the minute digits flash.Then turn VOLUME-/+ on the system or  
press VOLUME+/- on the remote to set the minutes.  
4
Press CLOCK again to confirm the time setting.  
Setting DVD menu options  
IMPORTANT!  
If the progressive scan feature is activated but the connectedTV does not support  
progressive signals or the cables are not connected accordingly, see the user  
manual for proper progressive scan setup or deactivate the progressive scan  
feature as below:  
1)Turn off yourTV progressive scan mode or turn on to interlaced mode.  
2) Press SYSTEM on the remote to exit the system menu and then DISC to exit  
progressive scan.  
DIVX(R) VOD  
Tip  
See chapters "Preparations" and "DVD Menu Options" in the User  
Manual for detailed descriptions.  
Playing a disc  
1
Press OPEN •CLOSEç (ç on the remote) to open the disc tray and lo
then press the same button again to close the disc tray.  
Make sure the label side of the disc is facing up.  
e
d
i
s
P
t
n
2
OPEN/CLOSE  
Playback will start automatically. If not pressÉÅ.  
3
To stop playback, press PRESET-/9 (9 on the remote).  
Programming and tuning to radio stations  
1
Press SOURCE (TUNER on the remote) to select tuner source.  
2
Press PROG on the remote for more than two seconds to program all available stations in  
order of waveband.  
3
Press PRESET+/- (CH +/- (¡ / ) on the remote) until the desired preset station is  
displayed.  
Notes for remote control:  
First, select the source you wish to control by  
pressing one of the source select keys on the remote  
control (DISC orTUNER, for example).  
Tip  
Detailed playback features and  
additional functions are described in the  
accompany owner's manual.  
Then select the desired function ( 2;, í, ë for  
example).  
2005 C Koninklijie Philips Electronics  
N.V. All rights reserved.  
GB  
PDCC-JS/JW-0535  

Intel DH55HC Desktop Board BOXDH55HC User Manual
JVC AV 20F475 User Manual
JVC TM H1375SU User Manual
Lenovo THINKCENTRE 7061 User Manual
Lenovo THINKCENTRE 9642 User Manual
Miele Cooktop KM 344G User Manual
Panasonic CT 36SF24 User Manual
Philips 28PW9623 User Manual
Philips 170S8FS User Manual
Philips PET1035 User Manual