HTM139
DVD MicroTheatre
user manual
Index
CAUTION
Use of controls or adjustments or
performance of procedures other
than herein may result in hazardous
radiation exposure or other unsafe
operation.
ATTENTION
L'utilisation des commandes ou
réglages ou le non-respect des
procédures ci-incluses peuvent se
traduire par une exposition
dangereuse à l'irradiation.
ATENCIÓN
El uso de mando o ajustes o la
ejecucción de métodos que no sean
los aquí descritos puede ocasionar
peligro de exposición a radiación.
3
Contents
General Information
Disc Operations
Features .................................................................. 6
Supplied accessories ............................................ 6
Environment information ................................... 6
Safety information ................................................ 7
Maintenance .......................................................... 7
Playable Discs ...................................................... 20
Region Codes...................................................... 20
Playing discs ......................................................... 21
Using the Disc Menu.......................................... 21
Using PBC feature (available for 2.0-version
VCD only)
Resuming playback...............................................21
Selecting and searching .............................. 21~22
Selecting a different track/chapter
Fast forwarding/reversing
GOTO
Different play modes:
REPEAT, SHUFFLE and REPEAT A-B .............. 22
REPEAT
SHUFFLE
Connections
Step1: Placing speakers and subwoofer ............8
Step2: Connecting speakers and subwoofer.....8
Step3: ConnectingTV set ............................ 9~10
UsingVideo in jack (CVBS)
Using ComponetVideo in jack (Pr PbY)
Using S-Video in jack
Using an accessory RF modulator
Step4: Connecting the FM antenna ................ 11
Step5: Connecting the power cord ................ 11
Step6: Connecting aVCR or cable/satellite
box......................................................................... .11
Step7: Connecting digital audio equipment....12
REPEAT A-B
Programming favourite tracks ......................... 23
Display information............................................ 23
ZOOM.................................................................. 24
AUDIO ................................................................. 24
SUBTITLE............................................................. 24
Playing a title........................................................ 24
Playing MP3/WMA/JPEG disc .......................... 24
Playing MP3 music and JPEG picture
simultaneously.....................................................25
Playing Kodak Picture disc ................................ 25
Functional Overview
Controls on the system .................................... 13
Remote control ........................................... 14~15
Getting Started
Step 1: Using Remote Control ........................ 16
Step 2: Setting up theTV ........................... 16~18
Selecting the color system that matches
your TV set
Setting up Progressive Scan feature
To deactivate Progressive manually
Step 3: Setting language preference ................ 18
Setting the OSD Language
DVD MENU Operations
Using the menu bar ........................................... 26
Using setup menu (user preference settings)
........... .............................................................. 27~29
TV Display
Screen Saver
Night Mode
TestTone
Changing the password
Restricting playback by setting parental level
Rating explanations
OSD language (menu lanuage)
Default
Setting the Audio, Subtitle and Disc Menu
language
Basic Functions
Switching the system on/off ............................. 19
Power saving automatic standby ..................... 19
Volume control ................................................... 19
Sound Control .................................................... 19
DBB (Dynamic Bass Boost)
DSC (Digital Sound Control)
4
Contents
Tuner
Tuning to radio stations.......................................30
Storing preset radio stations..............................30
Manual programming.......................................30
Automatic programming.................................30
Listening to preset radio stations......................30
Deleting a preset radio station..........................30
Clock/Timer
Viewing clock.........................................................31
Setting clock...........................................................31
Setting wake-up timer..........................................31
Setting sleep timer................................................31
Specifications ........................................... 32
Troubleshooting ............................. 33~35
Glossary......................................................... 36
5
General Information
IMPORTANT!
Supplied accessories
– Remote control with one CR2025 battery
– Two speakers and one subwoofer
– AC power cord
– DIN cable
– Composite video cable (yellow)
– FM wire antenna
PLEASE NOTETHATTHE VOLTAGE
SELECTOR LOCATED ATTHE REAR OF
THIS SYSTEM IS PRESET AT 220V FROM
THE FACTORY. FOR COUNTRIESTHAT
OPERATE AT 110V-127V, PLEASE ADJUST
TO 110V-127V BEFOREYOU SWITCH ON
THE SYSTEM.
– User Manual and Quick Start Guide
If any item is damaged or missing, contact
your retailer or Philips.
Features
Your DVD MICROTHEATRE System with 2.1-
channel full analog amplifier creates the same
dynamic sound qualities that you find in full
fledged cinemas and incorporates some of the
best features in home theater technology.
Environmental information
All unnecessary packaging has been omitted.We
have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
Other features include:
Built-in Dolby Digital decoder, supporting
Incredible Surround and DSC sound setting.
Your system consists of materials which can be
recycled and reused if disassembled by a
specialised company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old equipment.
Additional Component Connections
Lets you connect other audio and audio/visual
components to the DVD micro system.
Night Mode
Lets you compress the dynamic range, reducing
the difference in loudness between different
sounds in Dolby Digital mode.
Parental Control (Rating Level)
Lets you set a ratings level so that your children
cannot watch a DVD that has a rating higher
than you set.
Sleep/Wake-upTimer
Enables the system to switch on/off automatically
at a preset time.
Progressive Scan
Provides high quality flicker-free images for film
based sources.When a picture refreshes, its
vertical resolution can double to 525 lines.
Note:
– To fully enjoy the progressive scan feature, you
need a progressive scanTV.
6
General Information
Safety information
Maintenance
●
Before operating the system, check that the
operating voltage indicated on the typeplate (or
the voltage indication beside the voltage
selector) of your system is identical with the
voltage of your local power supply. If not, please
consult your dealer.
● When a disc becomes dirty,
clean it with a cleaning cloth.
Wipe the disc from the center
out, in a straight line.
● Do not expose the player,
batteries or discs to humidity,
●
●
Place the system on a flat, hard and stable
surface.
rain, sand or excessive heat
(caused by heating equipment or direct sunlight).
Always keep the disc tray closed to avoid dust
on the lens.
Place the system in a location with adequate
ventilation to prevent internal heat build-up in
your system. Allow at least 10 cm (4 inches)
clearance from the rear and the top of the unit
and 5 cm (2 inches) from each side.
The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc.
Do not expose the system, batteries or discs to
excessive moisture, rain, sand or heat sources
caused by heating equipment or direct sunlight.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
● Do not use solvents such as benzene, thinner,
commercially available cleaners, or anti-static
spray intended for colour discs.
●
●
● The lens may cloud over when the player is
suddenly moved from cold to warm
surroundings, making it impossible to play a disc.
Leave the player in the warm environment until
the moisture evaporates.
●
●
●
No objects filled with liquids, such as vases, shall
be placed on the apparatus.
If the system is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens of the disc
unit inside the system. Should this occur, the CD
player would not operate normally. Leave the
power on for about one hour with no disc in the
system until normal playback is possible.
The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
When the system is switched to Standby
mode, it is still consuming some power.
To disconnect the system from the
power supply completely, remove the AC
power plug from the wall socket.
●
●
7
Connections
Step 1: Placing speakers and
subwoofer
Step 2: Connecting speakers
and subwoofer
NA
)
For best possible surround sound, locate your
speakers and subwoofer as follows:
●
●
Connect the supplied DIN cable to DVD player’s
DIN jack and the left speaker’s DIN jack.
●
●
Place the left and right speakers at equal
distances from theTV set and at an angle of
approximately 45 degrees from the listening
position.
Connect the supplied speaker wires of the right
speaker to SPEAKER RIGHT on the left speaker,
red wire to red jack ( “+” ), black wire to black
jack ( “-“ ). Fully insert the stripped portion of
the speaker wire into the terminal as shown.
Place the subwoofer on the floor.
Notes:
– To avoid magnetic interference, position the
speakers, subwoofer as far as possible from the
main unit,TV set or other radiation source.
– Allow adequate ventilation around the DVD
System.
●
Connect the supplied speaker wire of the
subwoofer to SUBWOOFER OUT on the left
speaker, green wire to green jack ( “+” ), white
wire to white jack ( “-” ).
IMPORTANT!
The type plate is located on the bottom
of the system.
To avoid overheating of the system, a
safety circuit has been built in. Therefore,
your system may switch to Standby
mode automatically under extreme
conditions. If this happens, let the system
cool down before reusing it.
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
8
Connections
Using componentVideo In jack (Pr PbY)
Step 3: ConnectingTV set
●
●
Use the component video cables (red/blue/
green, not supplied) to connect the system’s PR/
PB/Y jacks to the corresponding Component
video input jacks (or labeled as Pr/Cr Pb/CbY or
YUV) on theTV set.
IMPORTANT!
– You only need to make one video
connection from the following options,
according to the capabilities of yourTV
system.
– S-Video or ComponentVideo
connection provides higher picture
quality. These options must be available
on yourTV set.
To listen toTV channels through this system, use
the audio cables (white/red, not supplied) to
connect AUX IN (L/R) jacks to the
corresponding AUDIO OUT jacks on theTV set.
Or, to listen to disc playback of the system
through yourTV, use the audio cables (white/red,
not supplied) to connect LINE OUT (L/R)
jacks to the corresponding AUDIO IN jacks on
theTV set.
– Connect the system directly to theTV
set.
Using Video In jack (CVBS)
ANTENNA
FM
(75Ω)
ANTENNA
FM
(75Ω)
●
●
Use the supplied composite video cable (yellow)
to connect the system’s COMPOSITE
VIDEO jack to the video input jack (or labeled
as A/V In,Video In, Composite or Baseband) on
theTV set.
Notes for progressive scan video:
– The progressive scan video quality is only
possible when usingY Pb Pr, and a progressive scan
TV is required.
– If you are using a Progressive ScanTV (TV must
indicate Progressive Scan or ProScan capability), to
activateTV Progressive Scan, please refer to yourTV
user manual. For DVD system’s Progressive Scan
function, see “Getting Started - Setting up
Progressive Scan feature’’.
– If yourTV does not support Progressive Scan, you
will not be able to view the picture.Turn off
progressive scan in PROGRESSIVE menu of the
system setup menu.
To listen toTV channels through this system, use
the audio cables (white/red, not supplied) to
connect AUX IN (L/R) jacks to the
corresponding AUDIO OUT jacks on theTV set.
Or, to listen to disc playback of the system
through yourTV, use the audio cables (white/red,
not supplied) to connect LINE OUT (L/R)
jacks to the corresponding AUDIO IN jacks on
theTV set.
9
Connections
Using S-Video In jack
Using an accessory RF modulator
IMPORTANT!
– If yourTV set only has a single
Antenna In jack (or labeled as 75 ohm or
RF In), you will need a RF modulator in
order to view the DVD playback viaTV.
See your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
ANTENNA
FM
(75Ω)
●
●
Use the S-Video cable (not supplied) to connect
the system’s S-VIDEO jack to the S-Video
input jack (or labeled asY/C or S-VHS) on the
TV set.
ANTENNA
FM
(75Ω)
To listen toTV channels through this system, use
the audio cables (white/red, not supplied) to
connect AUX IN (L/R) jacks to the
●
●
Use the supplied composite cable (yellow) to
connect the system’s COMPOSITEVIDEO
jack to the video input jack on the RF modulator.
Use the RF coaxial cable (not supplied) to
connect the RF modulator to yourTV’s RF jack.
corresponding AUDIO OUT jacks on theTV set.
Or, to listen to disc playback of the system
through theTV, use the audio cables (white/red,
not supplied) to connect LINE OUT (L/R)
jacks to the corresponding AUDIO IN jacks on
theTV set.
10
Connections
Step 4: Connecting the FM
antenna
Step 6: Connecting aVCR or
cable/satellite box
●
Connect the supplied FM antenna to the FM (75
Ω) jack at the back of the main unit. Extend the
FM antenna and fix its end to the wall.
Viewing and listening to playback
Step 5: Connecting the power
cord
IMPORTANT!
–
Never make or change any
connection with the power switched on.
ANTENNA
FM
(75Ω)
NTENNA
FM
(75Ω)
1 Connect theVCR or Cable/Satellite Box to the
TV system as shown.
2 Using the audio cables (red/white, not supplied)
Connect the system’s AUX IN (L/R) jacks to
the AUDIO OUT jacks on theVCR or Cable/
Satellite box.
●
After everything is connected properly, plug in
the AC power cord to the power socket.
Before starting operation, press AUX on the
remote control to select “AUX” in order to
activate the input source.
Using theVCR for recording DVDs
Some DVDs are copyright-protected.You cannot
record or dub protected discs using aVCR.
3 Connect the system’s COMPOSITEVIDEO
jack to theVIDEO IN jack on theVCR.
4 Connect the system’s LINE OUT (R/L) jacks
to the AUDIO IN jacks on theVCR. This will
allow you to make analog stereo (two channel,
right and left) recording.
To view DVD playback while recording
You must connect the system to yourTV system
using the S-VIDEO (as shown above) or the
COMPONENTVIDEO OUT (Pr PbY)
video connection.
11
Connections
Step 7: Connecting digital audio
equipment
ANTENNA
FM
(75Ω)
DVD player
Digital audio recorder
Recording (digital)
Connect the system’s COAXIAL OUT (digital
out) jack to the DIGITAL IN jack on a digital
recording device (DTS-DigitalTheater System
compatible, with a Dolby Digital decoder, for
example).
Before operation, set COAXIAL OUTPUT
according to the audio connection.
12
Functional Overview
1
2
7
8
9
3
0
!
Y
4
5
6
6 iR Sensor
point the remote control towards this sensor.
7 OPEN/CLOSE
opens or closes the disc door.
8 PROGRAM
ForVCD/CD only: program the favourite tracks
9 MODE
selects various repeat play modes (For VCD
with PBC feature, PBC must be turned off.)
0 VOLUME +/-
adjusts the volume upward/downward.
! Display
shows the current status of the DVD player.
Controls on the system
–
1 DBB
enables or disables bass enhancement.
2 DSC
selects different types of preset sound equalizer
settings (CLASSIC, ROCK, JAZZ or POP).
–
–
–
–
3 TUNING à / á
–
Tuner...............tunes to a radio station
Disc................ fast searches backward/forward in
a disc at different speeds.
–
Clock.............sets the minutes
4 STANDBY-ON B
–
–
switches the system on or to standby mode.
5 ÉÅ
–
–
starts or interrupts disc playback
SOURCE
selects the respective sound source: DVD, FM or
AUX.
¡ / ™
Disc................press to skip to the previous/next
chapter/title/track.
Tuner..............selects a preset radio station
Clock..............sets the hours
9
–
stops disc playback or erases a program.
13
Functional Overview
6 OK
Remote control
1 B
–
confirms a selection.
4 / 3 / 5 / 6
–
switches the system to standby mode.
–
–
selects an item in a menu.
2 SOURCE (DISC/AUX/TUNER)
moves an enlarged picture up/down/left/right.
5 / 6
Disc................ fast searches backward/forward in
a disc at different speeds.
–
–
switches on the system
selects the respective sound source for disc/FM/
AUX
Tuner...............tunes to a radio station
Clock...............sets the minutes
3 A-B
repeats playback of a specific section within a
chapter of DVD or a track of VCD/CD.
4 SYSTEM MENU
enters or exits the system menu.
5 MODE
–
7 AUDIO
forVCD
–
–
sets Left vocal, Right vocal, Mono left, Mono right
or Stereo sound mode.
for DVD
–
selects variations of continuous playback (For
–
selects an audio language.
VCD with PBC feature, PBC must be turned off.)
ForVCD/CD only: selects to playback in random
order (ForVCD with PBC feature, PBC must be
turned off.)
–
8 ÉÅ
–
starts or interrupts disc playback.
9 ¡ / ™
Tuner...............selects a preset radio station
Disc.................skips to the previous/next chapter/
title/track
1
Clock..............sets the hours
TUNER
DISPLAY
OSD
DISC
A-B
AUX
#
2
3
–
For JPEG: selects different zooming rates
$
%
MODE
CLOCK SLEEP/TIMER
0 9
SYSTEM MENU
DISC MENU
4
5
^
–
stops disc playback or erases a program.
! Numeric Keypad (0-9)
–
inputs a track/title/chapter number of the disc.
OK
6
@ PROG
–
ForVCD/CD only: program the favourite tracks
AUDIO
MUTE
7
8
&
*
# DISPLAY (OSD)
–
displays disc playback time during playback
+
9
VOL
$ CLOCK
–
sets and views the clock
0
!
GOTO
3
1
4
2
5
8
0
(
)
% SLEEP/TIMER
–
–
ZOOM
6
activates/deactivates or selects the sleep timer
activates/deactivates or sets the wake-up timer
DSC
9
7
¡
™
£
PROG
SUBTITLE
DBB
@
^ DISC MENU
–
DVD/VCD: enters or exits the disc contents
menu (ForVCD with PBC feature, PBC must be
turned on.)
–
MP3/WMA/JPEG: switches on or off the album/
picture menu.
14
Functional Overview
& MUTE
–
disables or enables sound output.
* VOL +/-
–
adjusts the volume upward/downward.
( GOTO
–
fast searches in a disc by entering a time, title or
chapter (ForVCD with PBC feature, PBC must
be turned off.)
) ZOOM
–
DVD/VCD/JPEG: enlarges a picture or active
image on theTV screen.
–
For JPEG: turns on/off the zooming feature
¡ DSC
selects different types of preset sound equalizer
settings (CLASSIC, ROCK, JAZZ or POP).
™ DBB
–
–
enables or disables bass enhancement.
£ SUBTITLE
–
selects a subtitle language.
Notes for remote control:
– First select the source you wish to control
by pressing one of the source select keys on
the remote control (for example CD ,
TUNER).
– Then select the desired function (for
exampleÉ, í, ë).
15
Getting Started
Step 2: Setting up theTV
IMPORTANT!
Make sure you have completed all the
necessary connections. (See
“ConnectingTV”).
Step 1: Using Remote Control
IMPORTANT!
– Before using the remote control,
remove the insulation plastic tab as
shown in the picture below.
– If the remote control does not
function correctly or the operating range
is reduced, replace the battery with a
new (CR2025) battery.
1 Switch the DVD system on and then select
DISC source. (See “Switching the system
on/off”).
2 Turn on theTV and set to the correct video-in
channel.You should see the blue Philips DVD
background screen on theTV.
➜ Usually these channels are between the
lowest and highest channels and may be called
FRONT, A/V IN, orVIDEO. See yourTV manual
for more details.
➜ Or, you may go to channel 1 on yourTV, then
press the Channel up button repeatedly until
you see theVideo In channel.
➜ Or, theTV Remote Control may have a
button or switch that chooses different video
modes.
➜ Or, set theTV to channel 3 or 4 if you are
using an RF modulator.
1 Push to open the battery tray.
Selecting the color system that matches
yourTV set
2 Replace a new battery according to the
indicated polarity.
This DVD system is compatible with both NTSC
and PAL. For the playback of a DVD disc on this
DVD system, the color systems of the DVD,TV
set and DVD System should match.
3 Push the battery tray back to close it.
Using the Remote Control to operate
the Player
MODE
CLOCK
SLEEP/TIMER
1 Aim the Remote Control directly at the remote
sensor (IR) on the front panel.
SOURCE
2 Select the source you wish to
STANDBY-ON
control by pressing one of the
M
I
C
RO
T
H
E
AT
R
E
source select buttons on the
remote.
4
3 Then select the desired
function (for example,
ÉÅ, ¡ or ™).
DISC
A-B
AUX
TUNER
DISPLAY
OSD
MODE
CLOCK SLEEP/TIMER
SYSTEM MENU
DISC MENU
TV DISPLAY
MULTI
TV TYPE
SCREEN SAVER
CAUTION!
– Remove the battery if it is exhausted
or if the Remote Control is not being
used for a long time.
SET TO MULTI
– Batteries contain chemical
substances,so they should be disposed of
properly.
16
Getting Started
1 In disc mode, stop playback then press
SYSTEM MENU.
1 Turn on yourTV.
2 Turn off yourTV progressive scan mode or turn
on interlaced mode (refer to yourTV user
manual).
➜ The menu bar will appear across the top of
theTV screen.
2 Select
icon and press 4.
3 Press STANDBY-ON B to turn on the
3 Press à / á / 4 / 3 keys on the remote
DVD player.
control to navigate in the menu.
4 Select the correctVideo Input channel.
➜ Move to
, and press á.
➜ Move to “TVTYPE” , and press á.
5 Press SYSTEM MENU on the remote control.
➜ The menu bar will appear across the top of
theTV screen.
MULTI
– Select this if the connectedTV set is
compatible with both NTSC and PAL (multi
system).The output format will be consistent wit
the video signal of the disc.
6 Select
icon and press 4.
➜ Playback will pause.
NTSC
TV DISPLAY
TV TYPE
– Select this if the connectedTV set is NTSC
system. It will change the video signal of a PAL
video disc and output to NTSC system.
PROGRESSIVE
SCREEN SAVER
OFF
ON
PROGRESSIVE NOW ON
PAL
– Select this if the connectedTV set is PAL
system. It will change the video signal of an
NTSC disc and output to PAL format.
7 Press à / á / 4 / 3 keys on the remote
control to navigate in the menu.
4 Select an item and press OK.
➜ The screen messages for further setting
confirmation may appear. Follow the on-screen
instructions to proceed to confirm the setting or
not.
➜ Move to
, and press á.
➜ Move to “PROGRESSIVE” , and press á.
➜ Move to “ON”, and press OK.
➜ The screen message below appears on the
TV.
To remove the menu
Press SYSTEM MENU.
ACTIVATING PROGRESSIVE SCAN
1. ENSURE YOUR TV HAS PROGRESSIVE SCAN.
2. CONNECT USING YPRPB(RGB) VIDEO CABLES
3. IF THERE IS A BLANK SCREEN, WAIT FOR 15
SECONDS FOR AUTO RECOVER.
Setting up Progressive Scan feature (for
Progressive ScanTV only)
<>-MOVE
OK-SELECT
The progressive scan display twice the number
of frames per seconds than interlaced scanning
(ordinary normalTV system).With nearly double
the number of lines, progressive scan offers
higher picture resolution and quality.
8 Press à / á to highlight OK in the menu and
press OK on the remote to confirm.
➜ The screen message for further progressive
scan setting confirmation will appear.
There will be a distorted picture on your
TV at this state until you turn on the
progressive scan mode on yourTV.
IMPORTANT!
Before enabling the progressive scan
feature, you must ensure:
1)YourTV can accept progressive signals, a
progressive scanTV is required.
9 Turn on yourTV progressive scan mode (refer to
yourTV user manual).
0 In the confirmation menu, press à / á to
highlight OK in the menu and press OK on the
remote to confirm.
2)You have connected the DVD player to your
TV usingY Pb Pr (see “ConnectingTV set”)
17
Getting Started
➜ Progressive scan is now set on.TV screen
comes to the system menu.
➜ If distored picture still appears, it indicates
that yourTV doesn’t support progressive scan. In
this case, turn off progressive scan as described
in “To deactivate Progressive manually”.
1 Press SYSTEM MENU on the remote control.
➜ The menu bar will appear across the top of
theTV screen.
2 Select
icon and press 4.
➜ Playback will pause.
3 Press à / á / 4 / 3 keys on the remote
control to navigate in the menu.
! Press SYSTEM MENU on the remote to exit
the system menu.
➜ Move to , and press á.
➜ Move to “OSD LANG” , and press á.
➜ The setup is complete now and you can start
enjoying the high quality picture.
4 Select your desired language and press OK.
To deactivate Progressive manually
To remove the menu
● When the distorted sign still appears on
theTV, it may be because the connectedTV
does not accept progressive signals, and
progressive is set by mistake.You must reset the
unit to interlace format.
● Press SYSTEM MENU on the remote control
again.
Setting the Audio, Subtitle and Disc
Menu language
1 Turn off yourTV progressive scan mode or turn
on to interlaced mode (refer to yourTV user
manual).
2 Turn off progressive scan by selecting “OFF”
under PROGRESSIVE menu, then press
SYSTEM MENU on the remote to exit the
system menu.
AUDIO
ENGLISH
ENGLISH
ENGLISH
SUBTITLE
DISC MENU
● To turn off progressive scan, you may also first
open the disc door, then hold down ™ on the
front panel, and press numeric key “1” on the
remote.
GOTO LANGUAGE SETUP PAGE
1 In disc mode, stop playback then press
SYSTEM MENU.
➜ Progressive scan is turned off.
➜ The menu bar will appear across the top of
theTV screen.
Step 3: Setting language
preference
2 Select
icon and press 4.
You can select your own preferred language
settings.This DVD system will automatically
switch to the selected language whenever you
load a disc. If the language selected is not
available on the disc, the disc’s default language
will be used instead.The OSD language in the
system menu will remain once selected.
3 Press à / á /4 / 3 keys on the remote
control to navigate in the menu.
➜ Move to
, and press á.
➜ Move to one of the following and press á.
– “Audio” (disc’s soundtrack)
– “Subtitle” (disc’s subtitles)
– “Disc Menu” (disc’s menu)
Setting the OSD Language
4 Press 4 / 3 to select a language and
press OK.
PARENTAL
To remove the menu
Press SYSTEM MENU.
PASSWORD
OSD LANG
DEFAULTS
ENGLISH
SPANISH
PORTUGUESE
OSD LANGUAGE SET TO ENGLISH
18
Basic Operations
IMPORTANT!
Volume control
– Before you operate the system,
complete the connection procedures.
– When the system is switched to Standby
mode, it is still consuming power.To
disconnect the system from the power
supply completely, reomve the AC power
Press VOLUME (+/-) (or VOL +/- on the
remote) to increase or decrease the volume
level.
➜ The display briefly shows ”VOL” and a volume
value from “01” to “39” ( “MIN” or“MAX” is
displayed when adjusted to the lowest or highest
plug from the wall socket.
volume level).
Switching the system on/off
To switch off the volume temporarily
Press MUTE on the remote.
➜ Playback will continue without sound and
“MUTE” is displayed briefly.
●
●
●
In standby, press STANDBY ONB/
SOURCE on the set, or DISC/TUNER/
AUX on the remote to switch on the system.
➜ “POWER ON” is displayed briefly.
➜ The system will switch to the selected or last
selected source.
To activate sound reproduction, you can:
– press MUTE again;
– adjust the volume controls;
– change source.
To switch the system to standby mode
●
In power-on mode, press and hold STANDBY
ONB (B on the remote).
➜ The clock time will be displayed. Or "--:--"
will be displayed if clock time is not set.
Sound Control
DBB (Dynamic Bass Boost)
DBB enhances the bass response.
●
Press DBB to enable or disable DBB feature.
➜ If DBB is activated,“DBB” will be shown.
Power saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you
don’t press any button within 30 minutes in the
stop mode.
Helpful hints:
– Some discs might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce the
volume.
DSC (Digital Sound Control)
DSC provides a different type of preset sound
equalizer setting.
●
Press DSC on the remote (or on the system)
repeatedly to select:
CLASSIC, ROCK, JAZZ or POP
➜ The display shows the selected sound setting.
19
Disc Operations
IMPORTANT!
– Depending on the DVD orVIDEO CD,
some operations may be different or
restricted.
– Do not push on the disc tray or put
any objects other than disc on the disc
tray. Doing so may cause the disc player
malfunction.
– If the inhibit icon appears on theTV
screen when a button is pressed, it
means the function is not available on
the current disc or at the current time.
Region Codes
DVDs must be labeled for ALL regions or Region
4 in order to play on this DVD system.You
cannot play discs that are labeled for other
regions.
Playable Discs
Your DVD Player will play:
– DigitalVersatile Discs (DVDs)
– Video CDs (VCDs)
4
– SuperVideo CDs (SVCDs)
– DigitalVersatile Discs + Recordable
(DVD+R)
– DigitalVersatile Discs + Rewritable
(DVD+RW)
Note:
– If you are having trouble playing a certain disc,
remove the disc and try a different one. Improper
formatted disc will not play on this DVD Player.
– Compact Discs (CDs)
– MP3 disc on CD-R(W):
–
Supported sampling frequencies: 32kHz,
44.1kHz, 48kHz.
Supported Bit-rates : 32, 64, 96, 128, 192,
–
256(kbps)
– WMA-CDs (CD-ROMs with WMA tracks)
– Picture (JPEG) files on CD-R(W)
20
Disc Operations
To switch PBC on or off
Playing discs
1 In disc mode, press SYSTEM MENU.
➜ The menu bar will appear across the top of
theTV screen.
2 Press à / á /4 / 3 keys on the remote
control to navigate in the menu.
1 For DVDs andVCDs, make sure that the system
is properly connected to yourTV (See
Connecting aTV), and yourTV is turned on
and set to video-in channel (See Setting up
theTV).
➜ Press à / á to move to PBC ON/OFF
option, and press 4.
➜ If PBC was ON, it will switch to OFF and
start playback from the beginning of the disc.
➜ If PBC was OFF, it will switch to ON and
return to menu screen.
2 Press SOURCE on the system once or more
to select DVD mode ( or DISC on the remote
control).
➜ You should see the blue Philips DVD
background screen on theTV.
➜ When PBC is ON, pressing DISC MENU
will return to menu screen.
3 Push OPEN/CLOSE on the top of the system
to open the disc tray.
4 Insert a disc with the print side facing up and
Resuming playback
close the disc tray.
●
●
During playback, press 9 once to stop the
playback in resume mode, then pressÉÅ to
start playback from where you have stopped.
5 Playback will start automatically (depending on
the disc type).
➜ If a disc menu appears on theTV, see “Using
the Disc Menu”.
➜ If the disc is locked by parental control, you
must enter your four-digit password. (See
“Restricting playback by setting parental
level”).
To cancel the resume mode
In the stop position, press 9 again to fully stop
the playback. Or open the disc door, or switch
the system to standby mode.
Selecting and searching
To interrupt playback
●
●
PressÉÅ.
Selecting a different track/chapter
➜ “PAUSE” is displayed briefly on theTV screen.
For DVD/VCD/CD/MP3:
To resume playback, press ÉÅ again.
●
During playback, briefly press ¡ / ™ once or
more until your desired track/chapter number
appears.
To stop playback
Press 9.
●
Or,
use the Numeric Keypad (0-9) (only forVCD
(PBC OFF), CD and MP3) on the remote
control to directly input your track/chapter
number.
Using the Disc Menu
Depending on the disc, a menu may appear on
theTV screen once you load the disc.
➜ After selecting, playback will automatically
start from the beginning of the selected chapter/
track.
To select a playback feature or item
●
Use à / á / 4 / 3 and OK or Numeric
Keypad (0-9) on the remote control, then
pressÉÅ to start playback.
Helpful hints:
– Some VCDs have a single track, so track
selecting or an invalid input value for the current
disc will be ingored.
Using PBC feature (available for
2.0-versionVCD only)
–
If the player has been set to repeat chapter
(track), pressing this button will replay the same
chapter (track) from its beginning.
PBC playback allows you to playVideo CDs
interactively, following the menu on the display,
such as allowing you to select favourite songs.
21
Disc Operations
●
During playback, press repeatedly MODE on the
system to choose desired repeat play modes.
➜ ForVCD with PBC feature, PBC must be
turned off first.
➜ TV screen shows the play modes in the
sequence as follows:
Fast forwarding/reversing
For DVD/VCD/CD/MP3:
1 During playback, press á / à repeatedly to
select fast search speed in forward (FF) or
reverse (FR) playback.
➜The disc plays at a high speed with no sound.
ForDVDs
CHAPTER REPEAT ON:Repeats the current
chapter
TITLE REPEAT ON:Repeats the current title
REPEAT OFF:Switchs off play mode
2 To resume to normal playback, pressÉÅ.
Or, press à / á repeatedly until “PLAY” is
displayed on theTV screen.
Helpful hints:
ForVCDs/CDs/MP3
– For VCD/CD/MP3, fast searching forward/
backward is available only within the same track.
REPEATTRACK:Repeats the current track
REPEATALL:Plays all the tracks repeatedly
REPEAT OFF:Switchs off play mode
REPEAT ALBUM (for MP3 only):
Repeats the current album
GOTO
1 During playback, press GOTO once or more on
the remote control.
●
To return to normal playback, press MODE
repeatedly until “OFF” is displayed.
➜ ForVCD with PBC feature, PBC must be
turned off first.
➜TV screen shows various search bars in the
sequence as follows:
SHUFFLE
In this mode, all tracks will be played in random
order.
For DVDs:
ForVCD/CD
1 During playback, press 9 twice to fully stop the
playback.
2 Press MODE on the remote.
➜ SHUFFLE ON is displayed.
(used to select chapter number, or title field by
using à / á on the remote control)
(used to select playtime within the current title)
3 PressÉÅ to start shuffle play.
4 To switch off shuffle play, press 9 once.
ForVCDs/CDs:
Helpful hints:
– Selection of shuffle play is not available for
DVD and MP3.
(used to select playtime within the entire disc)
2 Use the Numeric Keypad (0-9) on the remote
control to input your title/chapter number or
playtime.
Repeat A-B
ForDVD/VCD/CD/:
1 Press A-B on the remote at your chosen
starting point.
3 Press OK on the remote to start playback from
where you have selected.
2 Press A-B on the remote again at your chosen
end point.
Helpful hints:
– An invalid input value for the current disc will
be ingored.
➜ The section will now repeat continuously.
➜ A-B play is available within a chapter of DVD
or a track.
3 To exit the sequence, press A-B on the remote
again.
Different play modes:REPEAT,
SHUFFLE and REPEAT A-B
➜“ATO B CANCELLED” is displayed briefly on
theTV screen.
REPEAT
ForDVDs/VCD/CD/MP3
22
Disc Operations
Display information
Programming favourite tracks
During playback, press DISPLAY on the
remote control repeatedly to display various disc
playback time on theTV screen ( and the
system’s display).
ForVCDs/CDs
You can select and program up to 99 desired
tracks for playback in the desired sequence. If
you like, store any track/chapter/title more than
once.
For DVDs:
1 During playback, press 9 twice to fully stop the
TITLE ELAPSED - elapsed playback time of
current title
TITLE REMAIN - remaining time of current
title
CHAPTER ELAPSED - elapsed playback
time of current chapter
CHAPTER REMAIN - remaining time of
current chapter
playback.
2 Press PROGRAM to activate programming
mode.
➜ On theTV screen,“PROGRAM” and
“P 00:00” are displayed.
➜ On the system’s display,“PROG” flashes, and
P00: 00 is displayed.
OFF - turns off the display information
3 Use the Numeric Keypad (0-9) on the
remote control to enter your desired track
number.
For VCDs/CDs
➜ ForVCD with PBC feature, PBC must be
turned off first.
4 Press OK on the remote to store the track.
➜ P00is changed to P01, indicating the first
programmed track is stored and the next
program sequence is available.
SINGLE ELAPSED - elapsed playback time
of current track
SINGLE REMAIN - remaining time of current
track
TOTAL ELAPSED - elapsed playback time of
disc.
TOTAL REMAIN - remaining playback time of
disc
5 Repeat steps 3-4 to store other tracks.
➜ If you attempt to program more than 99
tracks, FULL is displayed, and no track can be
stored.
6 PressÉÅ to playback the program.
OFF - turns off the display information
➜ “PROG” is displayed during playback.
To Erase program
You can erase program by doing one of the
following:
●
●
During program playback, press 9 two times.
Open the disc door.
➜ “PROG” disappears from the display.
Helpful hints:
– Programming is not available for DVD and
MP3 disc.
23
Disc Operations
ZOOM
For DVDs/VCDs/JPEG
SUBTITLE (DVD only)
Press repeatedly SUBTITLE on the remote
control to select different subtitle languages.
➜ The feature is disc dependant.
●
Zooming allows you to enlarge the video/ JPEG
image during playback.
●
●
Press ZOOM repeatedly to zoom in on the
playback video image.
➜ For JPEP picture disc, press ZOOM to
display“ZOOM ON”, then press ¡/ ™ to select
different enlarging rates.
Playing aTitle (DVD only)
1 During playback, press DISC MENU on the
remote control.
➜ The disc title menu appears on theTV screen.
2 Use à / á/4/3 or Numeric Keypad (0-9)
➜ Image size enlarges at different rates.
to select a play option.
To return to normal playback, press ZOOM
repeatedly until “ZOOM OFF “ is displayed.
3 Press OK to confirm.
Helpful hints:
Playing MP3/WMA/JPEG picture
disc
– When zooming in, you may use à / á/4/3
on the remote control to pan a picture across your
TV screen in pause position or during playback.
IMPORTANT!
– Make sure that the system is properly
connected to yourTV (see Connecting a
TV ), and yourTV is turned on and set to
AUDIO
video-in channel (Setting up theTV).
– For DRM-protectedWMA files, use
windows Media Player 10 (or later) for
CD burning/conversion.Visit
Windows Media Player andWM DRM
(Windows Media Digital Rights
Management).
For DVDs
●
●
On the remote control, press AUDIO
repeatedly to select the desired language for
sound track.
➜ The feature is disc dependant.
For VCDs
Press AUDIO repeatedly to select the audio
channel for sound output displayed on theTV
screen.
1 Load a MP3/WMA/Picture (JPEG) disc.
➜ The disc reading time may exceed 30
seconds due to complexity of the directory/file
configuration.
LEFT VOCAL, RIGHT VOCAL, MONO
LEFT, MONO RIGHT and STEREO
2 Playback will start automatically.
➜ The album/picture menu will appear on the
TV screen. If not, press DISC MENU on the
remote control.
24
Disc Operations
3 In the stop position, press à / á / 3 / 4to
select a desired album, then select a desired title
in the album.
Playing Kodak picture disc
1 Load a Kodak picture disc.
➜ The disc reading time may exceed 30
seconds due to complexity of the directory/file
configuration.
4 Press OK or 2;to start playback.
●
You can also use the numeric keys (0-9) to
enter your choice.
2 Playback will start automatically.
●
During playback, you may press ¡ / ™ to select
the previous/next title.
3 Press 9.
➜ 9 thumbnail pictures will appear on theTV
screen.
5 To stop playback, press 9.
If the MP3-CD menu is switched off
●
You can only play the current title by pressing
2;. While in playback mode, press ¡ / ™ to
select the previous/next title.
(example for the Kodak disc menu)
1
4
7
2
5
8
3
6
➜ The title number will appear.
6 During JPEG or Kodak Picture disc playback,
press PROG repeatedly to select different
slideshow view options.There are 12 options for
selection.The selected option will be displayed
on theTV screen.
9
4 Press ¡ / ™ to view the previous/next page (if
available).
Playing MP3 music and JPEG
pictures simultaneously
You can create a musical slide show if the disc
contains both the MP3 music and JPEG picture
files.
5 Press à / á/ 3 / 4to move within the
menu and press OK to select the desired
picture to play.
During playback, you can:
●
●
●
Press ¡ / ™ to select another title/picture in the
current folder.
1 Insert a MP3 disc that contains music and
pictures.
●
Press DISC MENU to display the menu if the
Press à / á/ 3 / 4on the remote control
to rotate or flip the picture files.
menu is not displayed.
2 In the stop mode, select a MP3 track in the
menu and press AUDIO.
Press 2;to pause/resume playback.
➜ “MP3 is selected” appears on theTV.
Notes:
– Due to the recording nature of Digital Audio
MP3 (DAM), only digital audio music will play.
– It is normal to experience an occasional “skip”
while you are listening to your MP3 discs.
– For multi-session discs with different formats,
only the first session can be read and played.
– DISC MENU does not function during Kodak
Picture disc playback.
3 Use 3 / 4 keys to select a picture file, then
press OK.
4 To stop simultaneous playback, press 9.
➜ The picture and MP3 music playback will
stop.
25
DVD Menu Operations
Subtitle
Using the menu bar
You can continue some operations directly via
the multiple menu bars on theTV screen
without interrupting the disc playback. But when
i
Press 4to select a desired language in DVD
mode.
Audio
Press 4to select a desired audio language on
the SVCD,VCD:
LeftVocal pRightVocal pMono Left p
Mono Right pStereo
you enter
pause.
(SETUP MENU), the playback will
x
Slow
A-B
MODE
CLOCK
SLEEP/TIMER
DISC MENU
The slow motion speed will display. Press 4
repeatedly to select a reverse or forward
slow motion speed.
To cancel the slow function, press 2;.
STATUS
SYSTEM MENU
1
2
OK
In DISC mode, select this icon and press 4to
view the time, title or chapter information of
the playing disc.
AUDIO
MUTE
Time Search
A time edit box appears on the display. Use
the numeric keys (0-9) to enter the time
(hours : minutes : seconds) at which you want
to start playback, then press OK to start play-
back. (This function is not available in the PBC
ON mode.
1 In disc mode, press SYSTEM MENU.
➜ The menu bar will appear across the top of
theTV set screen.
ZOOM
Press 4repeatedly to select an enlarged pic-
ture ratio: 1.5, 2 or 4.You can press à/ á/
3 / 4to move within the enlarged picture
on theTV set.
To resume normal playback, repeat the above
step to select ZOOM OFF.
ANGLE
2 Press à/ á/4/3on the remote control to
navigate in the menu.
Press 4to view the same scene from different
angles if the DVD is recorded with multi-angles.
STEP
Press 4repeatedly to play forward the disc
step by step (one frame every step).To cancel
the step function, press 2;.
➜ Press à/ á to move through the menu bar.
➜ Press 4to enter the selection.
To remove the menu
Press SYSTEM MENU or OK.
PBC PBC ON/OFF
Press 4to select PBC ON or OFF, and will re-
turn to the beginning of the disc (This function
is only available forVCD with PBC feature. ).
PROGRAM
See “Programming favourite tracks”, Using the
menu bar to program.
IMPORTANT!
– Some operations may be different or
restricted according to the disc format.
Refer to the jacket or care of the disc you
are playing.
– You can change the Subtitle Language
andAudio Language from the menu bar
only on the current disc. But this
operation cannot change the default
preset.
26
DVD Menu Operations
TV Display (default: Normal/PS)
Using the setup menu (user
preference settings)
IMPORTANT!
– This menu is accessible only in the
stop postion.
Set the aspect ratio of the DVD Player according
to theTV you have connected.
This DVD setup is carried out via yourTV set,
enabling you to customize the DVD System to
suit your particular requirements
MODE
CLOCK
SLEEP/TIMER
A-B
➜ Normal/PS (panscan): If you have a normal
TV and want both sides of the picture to be
trimmed or formatted to fit yourTV screen.
SYSTEM MENU
DISC MENU
1
23
OK
4
AUDIO
MUTE
1 In disc mode, press SYSTEM MENU.
➜ The menu bar will appear across the top of
theTV screen.
➜ Normal/LB (letterbox): If you have a
normalTV. In this case, a wide picture with black
bands on the upper and lower portions of the
TV screen will be displayed.
2 Select
icon and press 4 to enter the setup
menu. Then press 3 4 to select one of the
setup menu options and press á to enter the
submenu.
➜ Playback will pause.
SETUP MENU
➜ Wide: If you have a wide-screenTV.
Picture Setup
Sound Setup
Language Setup
Feature Setup
3 Press à / á/4/3 on the remote control to
navigate in the menu.
Screen Saver (default: On)
4 Press OK to confirm your setting.
This function is used to turn the screen saver on
or off.
To return to the upper-level menu
●
●
Press à or OK (in cases of value adjustment).
TV DISPLAY
TV TYPE
To remove the menu
Press SYSTEM MENU to exit the menu.
➜ Playback will resume and begin automatically.
PROGRESSIVE
OFF
ON
SCREEN SAVER
Note:
SCREEN SAVER NOW ON
– Some of the features in the System Menu
Options are described in “Getting Started”.
➜ ON: In STOP, PAUSE or No DISC mode, if
no actions are performed about 5 minutes, the
screen saver will be activated.
➜ OFF: Screen saver is disabled.
27
DVD Menu Operations
Night Mode
Changing the password
You can change the four-digit code used as
Password.
A-B
CLOCK
SLEEP/TIMER
MODE
NIGHT MODE
TEST TONE
OFF
ON
SYSTEM MENU
DISC MENU
15
23
OK
AUDIO
MUTE
NIGHT MODE SET TO OFF
+
VOL
OFF
GOTO
ZOOM
DSC
1
4
2
5
8
0
3
6
4
Select this when you want to enjoy the surround
sound with its full dynamic range.
7
9
PROG
SUBTITLE
DBB
ON
1 In disc mode, press SYSTEM MENU.
2 Select icon and press 4.
➜ Playback will pause.
Select this to level out the volume. High volume
output will be softened and low volume output
will be brought upward to an audio level.This
feature is only available for movies with Dolby
Digital mode.
3 Press à / á/4/3 on the remote control to
navigate in the menu.
➜ Move to
, and press á.
➜ Move to “PASSWORD” and press á.
TestTone
ENTER CODE
OSD LANG
NIGHT MODE
TEST TONE
OFF
ON
PLEASE ENTER OLD PASSWORD
LEFT.
4 Use the numeric keys (0-9) to enter your
current four-digit code.
ON
➜ The password supplied by default is 1234.
➜ If you forget the four-digit code, press 9 four
times, the system will change back to the default
password.
After selecting this item, the system will start
testing the speaker from left, right, subwoofer
cyclically until you exit tone test.
-You can adjust speakers level when you are
testing the speaker.
-The availability of the various channels test
depend on the number of speakers connected.
5 Then enter your new code. Press the same code
again to confirm.
Note:
ENTER CODE
OSD LANG
– You can press à to exit test tone mode at any
time.
PLEASE ENTER NEW PASSWORD
6 Press SYSTEM MENU again to remove the
menu.
28
DVD Menu Operations
5 Press 4/3 to select a rating level between 1-8
and press OK.
Restricting playback by setting parental
level
➜ DVDs rated above the level you select will
not play unless you enter your four-digit
password or choose a higher level rating. Select
“No Parental” to deactivate Parental level and
have all discs play.
Some DVDs may have a parental level assigned
to the complete disc or to certain scenes on the
disc.This feature lets you set a playback limitation
level.The rating levels are from 1 to 8 and are
country specific.You can prohibit the playing of
certain discs that are not suitable for your
children or have certain discs played with
alternative scenes.
5
6 Press SYSTEM MENU again to remove the
menu.
Rating explanations
NO PARENTAL - It will play all discs.
8 ADULT - material for adults only; riewed only
by adults due to graphic sexual scenes, violence,
or language.
1 In disc mode, press SYSTEM MENU.
7 NC-17 - No children under 17; not
recommended for children under 17.
6 PG-R - Parental Guidance - Restricted;
recommended that parents restrict children
under 17 from viewing or allow them to view
only when supervised by a parent or adult
guardian.
2 Select
icon and press 4.
➜ Playback will pause.
3 Press à / á/4/3 on the remote control to
navigate in the menu.
➜ Move to and press á.
➜ Move to “PARENTAL” and press á.
4 PG-13 - Material is unsuitable for children
under age 13.
3 PG - Parental Guidance suggested.
1 PG - General Audience; recommended as
acceptable for viewers of all ages.
ENTER CODE
OSD LANG
- OSD LANG (menu language)
To set the screen display language.The default
setting is English.
PLEASE ENTER PASSWORD
4 Use the numeric keys (0-9) to enter the
- Default
four-digit code.
If RESET is selected, all the items in the setup
menu will be reset to default setting, except
Parental Setting and Password.
29
Tuner
Autostore: automatic programming
Tuning to radio stations
Autostore automatically starts programming
radio stations from preset 1.Any previous
presets e.g. manually programmed will be erased.
1 Press STANDBY-ON y on the set to switch
on the last selected source.
2 Press repeatedly SOURCE (or TUNER on the
●
In tuner mode, press and hold PROGRAM on
the set until AUTOPROG appears.
➜ During automatic programming, display shows
AUTOPROG.
➜ Available stations are programmed (40 FM).
➜ After all stations are stored, the first autostore
preset station automatically plays.
remote) until FM is displayed.
3 Press and hold TUNING à/ á on the set
until the frequency in the display starts changing.
➜ Display shows SEARCH during automatic
tuning.
➜ After the system tunes to a station of
sufficient reception, display shows its frequency .
●
To tune to a weak station, press briefly and
repeatedly TUNING à / á (or à / á on
the remote) until an optimal reception is found.
Listening to preset radio stations
In tuner mode, press ¡ / ™ (or Numberic
keys on the remote) to select the desired
preset number.
➜ The preset number, radio frequency, and
waveband are displayed.
●
4 Repeat Step 3 if necessary until you find the
desired radio station.
Storing preset radio stations
You can preset up to 40 FM stations regardless
of the reception.
Deleting a preset radio station
1 In tuner mode, press ¡ / ™ (or Numberic
keys on the remote) to select the desired
preset number.
Manual programming
1 Tune to your desired radio station (refer to
➜ The preset number, radio frequency, and
waveband are displayed.
“Tuning to radio stations”).
2 Press briefly PROGRAM.
2 Press and holdÇuntil “DELETED” appears.
➜ The current preset radio station will be
deleted.
➜ ”P0O” and “PRG” are displayed.
3 Press ¡ / ™ (or Numberic keys on the
remote) to select the desired preset number.
➜ All other preset radio stations with higher
numbers are decreased by one.
4 Press again PROGRAM to store the radio
station.
➜ “PRG” disappears on the display.
●
Repeat steps 1-4 to store other radio stations.
Helpful hints:
– You can erase a preset station by storing
another frequency in its place.
30
Clock/Timer
2 Press DISC or TUNER to select the desired
Viewing clock
The clock (if it is set) will be shown in standby
mode.
source.
●
Before setting timer, make sure the music source
has been prepared.
To view the clock in any source mode
(DISC orTUNER for example)
DISC – load the disc.
TUNER – tune to the desired radio station.
●
●
Press briefly CLOCK on the remote.
3 Press ¡ / ™ repeatedly to set the hour.
4 Press à / á repeatedly to set the minute.
5 Press SLEEP/TIMER to store the time.
You may press MODE on the set to toggle
between 12-hour and 24-hour display.
➜ The clock is displayed for a few seconds.
➜ If the clock has not been set, "--:--" is
displayed.
➜
remains on the display.
●
●
At the preset time, the selected source will play.
To deactivate the wake-up timer
In standby mode, press and hold SLEEP/
TIMER until“TIMER OFF “ is displayed.
Setting clock
1 In standby or power on mode, press and hold
CLOCK on the remote.
➜ The clock digits flash on the display panel.
➜ If the clock has not been set, "--:--" flashes
Notes:
– The system will exit timer setting mode if no
button is pressed within 15 seconds.
2 Press ¡ / ™ repeatedly to set the hour.
– Display shows
deactivated.
if activated, and disappears if
3 Press à / á repeatedly to set the minute.
4 Press CLOCK agian to store the setting.
➜ The clock starts working.
Setting sleep timer
The sleep timer enables the system to switch off
by itself after a set period of time.
Notes:
– The clock setting will be erased when the system
is disconnected from the power supply.
– The system will exit clock setting mode if no
button is pressed within 15 seconds.
1 Press SLEEP/TIMER on the remote control
repeatedly to select a preset time.
➜ The selections are as follows (time in
minutes):
15™ 30 ™ 45™ 60™ 90™120™ OFF
Setting wake-up timer
The system can switch on to DISC orTUNER
mode automatically at a preset time, serving as
an alarm to wake you up.
2 Press SLEEP/TIMER until you reach the
desired length of time.
To deactivate the sleep timer
●
Press SLEEP/TIMER repeatedly until "OFF" is
displayed, or press the STANDBY ON y
button.
IMPORTANT!
– Before setting the timer, ensure that the
clock is set correctly.
– To set a new timer, you need to
deactivate the previously set timer.
1 In standby mode, press and hold SLEEP/
TIMER on the remote for more than five
seconds to enter timer setting mode.
➜ The current source and timer digits flash on
the display panel.
➜ “ NOTIMER “ will be displayed briefly if
wake-up timer is not set.
31
Specifications
AMPLIFIER
MAIN UNIT
Outpurt power
Power Supply Rating .......................110-127V 60Hz
/220-240V 50Hz, switchable
Power Consumption
L/R speakers ..................... 25 W /channel RMS
Subwoofer ............................................ 50W RMS
Speaker channel
Active ..................................................................... 30 W
Frequency Response .......................................................
............................................ 200 Hz - 18 kHz / 3 dB
Signal-to-Noise Ratio ....... > 60dB (A-weighted)
Input Sensitivity
AUX In ............................................................. 500 mV
Output Sensitivity
standby ..................................................................<3 W
Dimensions (w x h x d)....218 x 90 x 222 (mm)
Weight........................................................................1.24kg
Package Dimension (w x h x d).............................
...................................................550 x 314 x 330 (mm)
Gross weight.............................................................9.7kg
Line Out(1KHZ 0dB) ............................. 2 + 0.2V
SPEAKERS
TUNER
System ..............................................1-way, Bass reflex
Impedance .................................................................. 8 Ω
Speaker drivers ......................................... 3’’ fullrange
Frequency response ..................... 80 Hz – 20 kHz
Package Dimension (w x h x d)................................
...................................................125 x 250 x 232 (mm)
Weight ............................................ 2.4 kg/left speaker
Tuning Range............................FM 87.5 – 108 MHz
Signal-to-Noise Ratio ......................... FM ≥ 50 dB
DVD
Laser Type ........................................... Semiconductor
Disc Diameter .......................................... 12cm / 8cm
Video Decoding ....................... MPEG-2 / MPEG-1
Video DAC .......................................................... 12 Bits
Signal System ........................................... PAL / NTSC
Video Format ................................................ 4:3 / 16:9
Video S/N ...................................... 56 dB (minimum)
Composite Video Output ............. 1.0Vp-p, 75 Ω
S-Video Output .....................Y - 0.714Vp-p, 75 Ω
...................................................... C - 0.286 Vp-p, 75 Ω
Audio DAC ..................................... 24 Bits / 96 kHz
....................................................... 1.76 kg/right speaker
SUBWOOOFER
Impedance................................................................... 6 Ω
Speaker driver ................................ 5.25” subwoofer
Frequency response.........................60HZ—1K HZ
Dimensions(w x h x d )................................................
......................................................147 x 250 x 232(mm)
Weight .........................................................................2.4kg
Specifications and external appearance are
subject to change without notice.
32
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or Philips for
help.
Solution
Problem
✔
✔
Check if the AC power cord is properly
connected.
Press STANDBY ONB on the DVD System or
B on the remote to turn on the power.
No power.
✔
✔
✔
Check if theTV is switched on.
Check the video connection.
No picture.
Press SOURCE on the DVD player repeatedly
to select “DVD” or press DISC on the remote.
Set yourTV to the correctVideo In channel.This
channel is usually near channel 00. Or, you may
have a button on theTV remote control that
selects Auxiliary or A/V IN channel. See yourTV
owner’s manual for details. Or, change channels
at theTV until you see DVD screen on theTV.
If the progressive scan feature is activated but
the connectedTV does not support progressive
signals or the cables are not connected
accordingly, see page 18-19 for proper
progressive scan setup or deactivate the
progressive scan feature as below:
✔
✔
1)Turn off yourTV progressive scan mode or
turn on to interlaced mode.
2) Select “OFF” in PROGRESSIVE menu of
system setup menu to turn off progressive, then
press SYSTEM MENU to exit the menu.
✔
✔
Sometimes a small amount of picture distortion
may appear.This is not a malfunction.
Clean the disc.
Distorted or poor picture.
✔
TV has a colour system standard. If the disc’s or
DVD system’s colour system is different than
yourTV’s colour system, the picture may be
distorted or colourless.
Completely distorted picture or black/
white picture.
33
Troubleshooting
The aspect ratio of the screen cannot be
changed even though you have set theTV
shape.
✔
✔
The aspect ratio is fixed on the DVD disc.
Depending on theTV, it may not be possible to
change the aspect ratio.
No sound or distorted sound.
✔
✔
Adjust the volume.
Check that the speakers are connected
correctly.
✔
✔
✔
Replace the speaker cables.
Disconnect the headphones.
The system is in pause, slow motion or fast
forward/reverse mode, press ÉÅ (or ÉÅ
on the remote) to resume normal play mode.
The micro DVD player does not start
playback.
✔
✔
Insert a readable disc with the playback side
facing down.
Check the disc type, colour system and regional
code. Check for any scratches or smudges on
the disc.
✔
✔
✔
Press SYSTEM MENU to turn off the setup
menu screen.
Cancel the parental control rating function or
change the rating level.
Moisture has condensed inside the system.
Remove the disc and leave the system turned
on for about an hour.
✔
Disconnect the power plug from the outlet and
insert again.
The DVD micro system does not
respond when the buttons are pressed.
✔
✔
✔
Multi-language sound or subtitle is not
recorded on the DVD.
Changing the language for the sound or subtitle
is prohibited on the DVD.
Cannot activate some features, such as
Subtitles, or multi-language Audio.
The features may not be available on the disc.
✔
✔
If the signal is too weak, adjust the antenna or
connect an external antenna for better
reception.
Increase the distance between the Mini HiFi
System and yourTV orVCR.
Radio reception is poor.
34
Troubleshooting
The timer is not working.
✔
✔
Set the clock correctly.
The Clock/Timer setting is erased.
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
The remote control does not function.
✔
✔
Select the correct source (DISC or AUX for
example) before pressing the function button.
Point the remote control at the remote sensor
of the unit.
✔
✔
✔
✔
Reduce the distance to the player.
Remove any possible obstacles.
Replace the battery with new one.
Check that the battery is loaded correctly.
Low hum or buzz sound.
✔
Place the DVD micro system as far away as
possible from electrical devices (such as
speakers,TV) that may be causing interference.
Low bass response.
✔
✔
Check all speakers for correct polarity.
Unable to select Progressive Scan
Check that the output of the video signal is
switched to 'Ypbpr'.
35
Meet Philips at the Internet
HTM139
CLASS 1
LASER PRODUCT
Printed in China
PDCC-JH-0634
|