DVDVIDEO PLAYER
DDVVPP 533K
19/03/2004, 2:558P2M39 300 32131
01-34 DVP533K_78
1
Laser safety
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic” and the
double-D symbol are trademarks of Dolby
Laboratories.
This unit employs a laser. Due to possible
eye injury, only a qualified service person
should remove the cover or attempt to
service this device.
This product incorporates copyright
protection technology that is protected by
method claims of certain U.S. patents and
other intellectual property rights owned by
Macrovision Corporation and other rights
owners. Use of this copyright protection
technology must be authorised by
Macrovision Corporation, and is intended
for home and other limited viewing uses
only unless otherwise authorised by
Macrovision Corporation. Reverse
NOTE:
PICTURES SHOW N MAYBE
DIFFERENT BETW EEN
CO UNTRIES.
CAUTIO N
(WARNING LO CATIO N: O N THE
BACKPLATE O F THE SET)
NEVER MAKE O R CHANGE
CO NNECTIO NS W ITH THE
POW ER SW ITCHED O N.
engineering or disassembly is prohibited.
LASER
Type
Semiconductor laser
GaAlAs
Wave length
Output Power
650 nm (DVD)
780 nm (VCD/CD)
7 mW (DVD)
10 mW (VCD/CD)
Beam divergence 60 degree
19/03/2004, 2:558P2M39 300 32131
01-34 DVP533K_78
3
General Inform ation
Environm ental Inform ation
Important Note:
Due to the numerous versions of new
CD-Audio copy protection or
enhanced CD-Audio protection
recently available on certain discs,
Philips is unable to guarantee that
this DVD Player is fully compatible
with such new discs. Should you have
difficulty playing any such CD-Audio
discs, kindly refer them to your CD-
Audio disc retailer.
All unnecessary packaging has been
omitted.The packaging has been made
easy to separate into three materials:
cardboard (box), polystyrene foam
(buffer) and polyethylene (bags, protective
foam sheet).
Your DVD player consists of materials
which can be recycled and reused if
disassembled by a specialised company.
Please observe the local regulations
regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
The apparatus shall not be exposed to dripping
or splashing and that no objects filled with
liquids, such as vases, shall be placed on
apparatus.
‘CONSUMERS SHOULD NOTE THAT NOT
ALL HIGH DEFINITION TELEVISION SETS
ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS
TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE
CONNECTION TO THE ‘STANDARD
DEFINITION’ OUTPUT. IF THERE ARE
QUESTIONS REGARDING OURTV SET
COMPATIBILITY WITH THIS MODEL 525p
AND 625p DVD PLAYER, PLEASE CONTACT
OUR CUSTOMER SERVICE CENTER.’
For Customer Use:
Read carefully the information located at
the bottom of your DVDVIDEO player
and enter below the Serial No. Retain this
information for future reference.
Model No. DVP 533K
Serial No. _______________
19/03/2004, 2:558P2M39 300 32131
01-34 DVP533K_78
4
Index
English --------------------------------------- 6
Español ------------------------------------ 35
5
19/03/2004, 2:558P2M39 300 32131
01-34 DVP533K_78
5
Contents
Special disc features ................................ 20-21
Playing aTitle ................................................. 20
Camera Angle ................................................ 20
Changing the Audio Language .................... 20
Subtitles .......................................................... 20
Preview Function .......................................... 21
Playing MP3/JPEG Picture CD ............... 21-22
General Operation....................................... 21
Playback selection ......................................... 21
Repeat ............................................................. 22
Program playback ......................................... 22
Fast forward / reverse ................................. 22
Special JPEG features .................................... 22
Preview Function (JPEG) ............................. 22
Zoom picture (JPEG) ................................... 22
Playback with multi-angles (JPEG)............. 22
Introduction
Supplied accessories ....................................... 7
Care and safety information.......................... 7
Connections
Connecting TV.............................................. 8-9
Using Component Video jacks (Y Pb Pr) .. 8
Using Composite Video jack (CVBS) ......... 8
Using S-Video jack .......................................... 9
Using an accessory RF modulator .............. 9
Connecting the power cord........................ 10
Optional : Connecting to an Audio System .
........................................................................... 11
Stereo system has Dolby Pro Logic or Right
/ Left Audio In jack ....................................... 11
Optional: Connecting Digital AV Receiver ...
........................................................................... 11
Receiver has a PCM, Dolby Digital, or
Karaoke O perations
Playing Karaoke discs .................................... 23
General Operation....................................... 23
Key setting ...................................................... 23
Vocal ................................................................ 23
Mode ............................................................... 23
MPEG2 decoder ............................................ 11
Functional O verview
Front and Rear Panels .................................. 12
Remote Control ............................................ 13
System Menu O ptions
Getting Started
Step 1: Inserting batteries into the
Basic Operations ........................................... 24
General Setup Page ....................................... 24
Program .......................................................... 24
Screen Saver .................................................. 24
Audio Setup Page ..................................... 25-26
Speaker Setup ................................................ 25
Digital Audio Setup....................................... 25
Dolby Digital Setup ...................................... 26
Equalizer ......................................................... 26
3D Processing................................................ 27
Video Setup Page ..................................... 27-29
TV Display ...................................................... 27
Closed Captions ........................................... 28
Angle Mark ..................................................... 28
Progressive ..................................................... 28
Smart Picture ................................................. 29
Picture Setting ............................................... 29
Preference Page ........................................ 29-30
Parental .................................................... 29-30
Password ........................................................ 30
Default ............................................................. 30
Remote Control ............................................ 14
Using the Remote Control to operate the
Player ............................................................... 14
Step 2: Setting up the TV .............................. 14
Selecting the colour system that
corresponds to your TV.............................. 15
Step 3: Setting language preference ........... 16
Setting the OSD Language .......................... 16
Setting the Audio, Subtitle and Disc menu
language .......................................................... 16
Disc O perations
Playable Discs ................................................. 17
Playing discs ..................................................... 17
Using the Disc Menu..................................... 18
Basic playback controls........................... 18-20
Pausing playback ............................................ 18
Selecting track/chapter ................................ 18
Resuming playback from the last stopped
point ................................................................ 18
Zoom .............................................................. 19
Repeat ............................................................. 19
Repeat A-B ..................................................... 19
Slow Motion .................................................. 19
Forward / Reverse Searching ..................... 19
Time Search ................................................... 20
Specifications ...................................... 31
Troubleshooting ......................... 32–33
Glossary ......................................................................34
6
01-34 DVP533K_78
6
19/03/2004, 2:55 PM
8239 300 32131
Introduction
● Avoid high tem peratures, m oisture,
water and dust
Supplied accessories
– Do not expose the player, batteries or
discs to humidity, rain, sand or excessive
heat (caused by heating equipment or
direct sunlight.)
Video cable
(yellow)
● Avoid condensation problem
– The lens may cloud over when the
player is suddenly moved from cold to
warm surroundings, making it impossible
to play a disc. Leave the player in the
warm environment until the moisture
evaporates.
Audio cable
(white, red)
● Do not block the vents
– Do not operate the DVD Player in an
enclosed cabinet, allow about 10 cm (4
inches) of free space all around the player
for adequate ventilation.
Remote Control
and
two AA batteries
PREVIEW MUTE
10 cm
KARAOKE
KEY
VOCAL
MODE
(4 inches)
10 cm
(4 inches)
PHILIPS
10 cm
(4 inches)
DVD Home Cinema System
● Care of the cabinet
– Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits,
ammonia or abrasives.
Care and safety inform ation
● Power consum ption
– Check that the operating voltage
indicated on the typeplate (or beside the
voltage selector) is identical to the voltage
of your local power supply. If not, please
consult your dealer.
– When the system is switched to
Standby mode, it is still consuming power.
To disconnect the system from the power
supply completely, remove the AC power
plug from the wall jack.
● Finding a suitable location
– Place the player on a flat, hard, and
stable surface.
● Disc handling
– To clean a CD, wipe it in a
straight line from the center
towards the edge using a soft,
lint-free cloth. A cleaning
agent may damage the disc!
– Write only on the printed side of a
CDR(W) and only with a soft felt-tipped
pen.
– Handle the disc by its edge, do not
touch the surface.
7
8239 300 32131
19/03/2004, 2:55 PM
01-34 DVP533K_78
7
Connections
Connecting TV
COMPONENT
VIDEO IN
COMPONENT
VIDEO IN
S-VIDEO
IN
S-VIDEO
IN
V (Pr/Cr)
V (Pr/Cr)
U (Pb/Cb)
Y
AUDIO
IN
AUDIO
IN
U (Pb/Cb)
Y
VIDEO IN
VIDEO IN
C
O
M
PO
N
E
NT
C
O
M
PO
N
E
NT
V
I
D
E
O
IN
V
I
D
E
O
IN
S-V
I
D
E
O
S-V
I
D
E
O
I
N
I
N
V
U
Y
(
Pr/Cr)
V
U
Y
(Pr/Cr)
A
U
D
IO
A
U
D
IO
I
N
I
N
(Pb/Cb)
(Pb/Cb)
V
I
D
E
O
IN
V
I
D
E
O
IN
1
1
2
2
VIDEO OUT
Y
VIDEO OUT
Y
L
R
L
R
Pb
Pr
Pb
Pr
MAINS
MAINS
S-VIDEO OUT
S-VIDEO OUT
COAXIAL
COMPONENT DIGITAL OUT
VIDEO OUT
COAXIAL
COMPONENT DIGITAL OUT
VIDEO OUT
AUDIO OUT
AUDIO OUT
IMPO RTANT!
Using Com posite Video jacks
(CVBS)
– You only need to m ake one video
connection from the following
options, depending on the
capabilities of your TV system .
– Connect the DVD system directly
to the TV.
– Com ponent Video connection
provides highest picture quality.
These options m ust be available on
your TV.
1 Use the composite video cable (yellow) to
connect the DVD Player’s CVBS (VIDEO
OUT) jack to the video input jack (or
labeled as A/V In,Video In, Composite or
Baseband) on the TV (cable supplied).
2 To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
Using Com ponent Video jack
(Y Pb Pr)
1 Use the component video cables (red/
blue/green) to connect the DVD Player’s
Y Pb Pr jacks to the corresponding
Component video input jacks (or labeled
asY Pb Pr or YUV) on the TV (cable not
supplied).
2 To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
8
01-34 DVP533K_78
8
19/03/2004, 2:55 PM
8239 300 32131
Connections
RF coaxial cable to TV
2
Back of RF Modulator
(example only)
AUDIO IN
COMPONENT
VIDEO IN
S-VIDEO
IN
V (Pr/Cr)
AUDIO
IN
ANT IN
TO TV
VIDEO
IN
R
L
U (Pb/Cb)
Y
EO IN
C
O
M
PO
N
E
NT
CH3 CH4
V
I
D
E
O
IN
S-V
I
D
E
O
I
N
V
U
Y
(Pr/Cr)
A
U
D
IO
I
N
(
Pb/Cb)
V
I
D
E
O
IN
Antenna or
Cable TV signal
1
2
1
VIDEO OUT
Y
L
R
Pb
Pr
VIDEO OUT
Y
L
MAINS
Pb
Pr
S-VIDEO OUT
COAXIAL
COMPONENT DIGITAL OUT
VIDEO OUT
S-VIDEO OUT
R
AUDIO OUT
COAXIAL
COMPONENT DIGITAL OUT
VIDEO OUT
AUDIO OUT
IMPO RTANT!
IMPO RTANT!
– S-Video connection provides
better picture quality.This option
m ust be available on your TV.
– If your TV only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
m odulator in order to view the DVD
playback on the TV. See your
electronics retailer or contact
Philips for details on RF m odulator
availability and operations.
Using S-Video jack
1 Use the S-video cable to connect the
DVD system’s S-VIDEO O UT jack to
the S-Video input jack (or labeled asY/C
or S-VHS) on the TV (cable not supplied).
Using an accessory RF m odulator
2 To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
1 Use the composite video cable (yellow) to
connect the DVD Player’s CVBS (VIDEO
OUT) jack to the video input jack on the
RF modulator.
2 Use the RF coaxial cable (not supplied) to
connect the RF modulator to your TV’s
RF jack.
9
8239 300 32131
01-34 DVP533K_78
9
19/03/2004, 2:55 PM
Connections
Connecting the power cord
C
O
MPONENT
V
I
D
E
O
I
N
S-VID
EO
IN
V (Pr/Cr)
A
U
D
IO
IN
~
AC MAINS
U
Y
(Pb/Cb)
V
ID
E
O
IN
Y
VIDEO OUT
Pb
Pr
MAINS
S-VIDEO OUT
COAXIAL
COMPONENT DIGITAL OUT
VIDEO OUT
AUDIO
O
After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
When no disc is loaded, press
STANDBY O N on the DVD Player
front panel,
“NO DISC” m ay appear on the
display panel.
EN/CLO SE
STO P
PLAY/PAUSE
NO DISC
10
01-34 DVP533K_78
10
19/03/2004, 2:55 PM
8239 300 32131
Connections
Optional: Connecting to an
Audio System
O ptional: Connecting Digital AV
Receiver
STEREO
OPTICAL
A V Re ce ive r
AUDIO
IN
AUDIO
IN
DIGITAL
COAXIAL
VIDEO OUT
Y
VIDEO OUT
Y
L
R
L
R
Pb
Pr
Pb
Pr
MAINS
S-VIDEO OUT
S-VIDEO OUT
COAXIAL
COMPONENT DIGITAL OUT
VIDEO OUT
COAXIAL
COMPONENT DIGITAL OUT
VIDEO OUT
AUDIO OUT
AUDIO OUT
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
1 Select one of the video connections
(VIDEO IN, S-VIDEO IN or Component
Video (Y Pb Pr) jack depending on the
options available on your TV.
1 Select one of the video connections
VIDEO IN, S-VIDEO IN or Component
Video (Y Pb Pr) jack depending on the
options available on your TV.
2 Connect the COAXIAL jack of the DVD
Player to the corresponding Digital Audio
In jack on your Receiver (cable not
supplied).
2 Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied).
3 Set the DVD Player’s Digital Output to
PCM-ONLY or ALL depending on the
capabilities of your Receiver (see page 25
“Digital Output”).
Helpful Hint:
–
If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
11
8239 300 32131
19/03/2004, 2:55 PM
01-34 DVP533K_78
11
Functional O verview
Front and Rear Panels
2;PLAY/PAUSE
–To start or interrupt playback
9 STO P
–To stop playback
STAN DBY-O N B
IR Sensor
– Point the remote control towards this
sensor
–
To switch the DVD Player to Standby
mode or ON
Disc t ray
Display
– Shows the current status of the DVD
Player
O PEN /CLO SE /
–
Open/Close the disc tray
MIC
– For connecting microphone
LEVEL
– Microphone volume control
Audio O ut (Left /Right )
– Connect to AUDIO inputs of an amplifier,
receiver or stereo system
Mains (AC Power Cord)
–
Connect to a standard AC outlet
Digit al O ut (Coaxial)
– Connect to coaxial AUDIO input of a
digital audio equipment
S-Video O ut
–
Connect to S-Video input of aTV
Video O ut (CVBS)
Com ponent Video O ut (Y Pb Pr)
–
Connect to CVBSVideo input of aTV
– Connect to aTV with Y Pb Pr inputs
Y
VIDEO OUT
L
R
Pb
MAINS
S-VIDEO OUT
Pr
COAXIAL
COMPONENT DIGITAL OUT
VIDEO OUT
AUDIO OUT
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge m ay cause perm anent dam age to the unit.
12
01-34 DVP533K_78
12
19/03/2004, 2:55 PM
8239 300 32131
Functional O verview
Rem ote Control
RETURN / TITLE
–To go back to previous menu /
POW ER B
–
To switch the DVD player to
show title menu
standby mode or ON
DISC MEN U
– Enters or exits the disc contents
menu
0-9 num erical key pad
–
Selects numbered items in a
menu
– Switches on or off the playback
control mode (for VCD version
2.0 only)
DISPLAY
–
Displays information onTV
screen during playback
1 2 3 4
– Selects an item in the menu/
fast forward/backward, slow forward/
backward
SYSTEM MEN U
–
Access or exit DVD Player’s
PREVIEW MUTE
system menu
O K
KARAOKE
KEY
VOCAL
MODE
– Acknowledge menu selection
T
–
To search or select next chapter
or track
S
–To search or select previous
chapter or track
SUBTITLE
–
To access subtitle language
system menu
STO P ( 9 )
–To stop playback
AN GLE
PLAY ( B )
–
Selects a DVD camera angle
–To start playback
ZO O M
PAUSE ( ; )
–To pause playback temporarily /
frame-by-frame playback
–
Enlarge or reduce a picture on
the TV screen
AUDIO
–
To access audio language system
menu
REPEAT
– Selects various repeat modes
REPEAT (A-B)
– Repeats playback a specific section
on a disc
KARAO KE
–
Display karaoke menu to set MIC
on or off
PREVIEW
–To preview the content of a track
or whole disc
KEY
–
Display karaoke menu to set key
control
MUTE
VO CAL
– Disables or enables sound output
–
Choose audio channels or
karaoke methods
MO DE
–
Display karaoke menu
13
8239 300 32131
19/03/2004, 2:55 PM
01-34 DVP533K_78
13
Getting Started
Step 2: Setting up the TV
Step 1: Inserting batteries into
the Rem ote Control
IMPO RTANT!
Make sure you have com pleted all
the necessary connections. (See
pages 8-9 “Connecting TV”).
3
1
2
1 Turn on the TV and set to the correct
video-in channel. You should see the blue
Philips DVD background screen on the
TV.
1 Open the battery compartment.
● Usually these channels are between the
lowest and highest channels and may be
called FRONT,A/V IN, or VIDEO. See your
TV manual for more details.
● Or, you may go to channel 1 on your
TV, then press the Channel down button
repeatedly until you see the Video In
channel.
2 Insert two batteries type R06 or AA,
following the indications (+-) inside
the compartment.
3 Close the cover.
Using the Rem ote Control to
operate the Player
● Or, the TV Remote Control may have a
button or switch that chooses different
video modes.
1 Aim the Remote Control
directly at the remote
STO
P
● Or, set the TV to channel 3 or 4 if you
are using an RF modulator.
sensor (iR) on the front
panel.
2 If you are using external equipment, (eg.
audio system or receiver), turn it on and
select the appropriate input source for
the DVD Player output. Refer to the
equipment owner’s manual for detail.
2 Do not put any objects
between the Remote
Control and the DVD
Player while operating the
DVD Player.
CAUTIO N!
– Rem ove batteries if they are
exhausted or if the Rem ote Control
is not being used for a long tim e.
– Do not use old and new or
different types of batteries in
com bination.
– Batteries contain chem ical
substances, so they should be
disposed properly.
14
01-34 DVP533K_78
14
19/03/2004, 2:55 PM
8239 300 32131
Getting Started
Helpful Hint:
Before changing the current TV
Type setting, ensure that your TV
Selecting the colour system that
corresponds to your TV
–
This DVD Player is compatible with both
NTSC and PAL. In order for a DVD disc
to play on this Player, the colour system of
the Disc, the TV and the DVD Player
should match.
supports the ‘selected TVType’ system.
–
Follow the instructions shown on
the TV to confirm the selection (if
any).
–
If there is not proper picture on
your TV, wait for 15 seconds for auto
recover.
- - Video Setup Page - -
HINTS:(refer to the owner's manual
Changing to (selected TV Type)
1. Ensure your TV supports it.
TV Type
PAL
TV Display
NTSC
Multi
Closed Captions
Angle Mark
Progressive
Smart Picture
Picture Setting
2. If there is a blank screen on normal TV,
wait 15 seconds for auto recover
Cancel
OK
<
>
-
Move
OK
-
Select
Set TV Standard
1 Press SYSTEM MENU.
Confirm again to use (selected TV Type)
If picture is good press OK on remote
2 Press 12to select ‘Video Setup Page’.
3 Use the 1234keys on the Remote
Control to navigate in the menu.
Cancel
OK
Move to ‘TV Type’ and press 2.
TO GO BACK TO (Current TV Type):
1. Open tray
PAL – Select this if the connected TV is
PAL system. It will change the video signal
of a NTSC disc and output in PAL format.
2. Press '3' Key
<
> - Move
OK
-
Select
To exit from the m enu
Press SYSTEM MENU or select ‘Exit
Setup Menu’ and then press O K.
NTSC – Select this if the connected TV
is NTSC system. It will change the video
signal of a PAL disc (VCD only) and
output in NTSC format.
Multi – Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
4 Select an item and press O K.
15
8239 300 32131
19/03/2004, 2:55 PM
01-34 DVP533K_78
15
Getting Started
Setting the Audio, Subtitle and Disc
m enu language
Step 3: Setting language
preference
You can select your own preferred
language settings.This DVD system will
automatically switch to the selected
language whenever you load a disc. If the
language selected is not available on the
disc, the disc’s default language will be
used instead. The OSD language in the
system menu will remain once selected.
- - Preference Page - -
Audio
English
Chinese
Japanese
French
German
Spanish
Dutch
Subtitle
Disc Menu
Parental
Password
Default
Italian
Setting the O SD Language
Set Preference To English
1 Press STO P twice then, press SYSTEM
MENU.
2 Press 12to select ‘Preference Page’.
3 Press 34to highlight the following in the
Preference Page.
– ‘Audio’ (disc’s soundtrack)
– ‘Subtitle’ (disc’s subtitles)
– ‘Disc Menu’ (disc’s menu)
4 Enter its submenu by pressing B.
5 Select a language and press O K.
1 Press SYSTEM MENU.
6 Repeat steps 3~5 for other language
2 Press 12to select ‘General Setup’ page.
settings.
3 Use the 1234keys on the Remote
To exit from the m enu
Control to navigate in the menu.
Press SYSTEM MENU or select ‘Exit
Setup Menu’ and then press O K.
Move to ‘OSD Language’ and press 2.
4 Select a language and press O K.
To exit from the m enu
Press SYSTEM MENU or select ‘Exit
Setup Menu’ and then press O K.
If you choose OTHERS in Audio,
Subtitle or Disc Menu,
1 Press 34to highlight ‘Others’.
2 Press O K and when you are asked to
enter a language code (see ‘Language
Code’ on page 65).
3 Input a language code by using the
num eric keypad (0-9).
4 Press O K to confirm.
16
01-34 DVP533K_78
16
19/03/2004, 2:56 PM
8239 300 32131
Disc O perations
IMPO RTANT!
IMPO RTANT!
– Depending on the DVD or VIDEO
CD, som e operations m ay be
different or restricted.
– Do not push on the disc tray or
put any objects other than disc on
the disc tray. Doing so m ay cause
the disc player m alfunction.
If the inhibit icon (ø) appears on the
TV screen when a button is pressed,
it m eans the function is not available
on the current disc or at the current
tim e.
Playing discs
1 Connect the power cords of the DVD
Player and TV (and any optional stereo or
AV receiver) to a power outlet.
Playable Discs
Your DVD Player will play:
– DigitalVersatile Discs (DVDs)
– Video CDs (VCDs)
– Super Video CDs (SVCDs)
– DigitalVersatile Discs + Recordable
(DVD+R)
– DigitalVersatile Discs + Rewritable
(DVD+RW)
– Compact Discs (CDs)
2 Turn on the TV power and set to the
correct Video In channel. (See page 14
“Setting up the TV”).
3 Press STANDBY-ON on the DVD Player
front panel.
● You should see the blue Philips DVD
background screen on the TV.
– CD Graphics
4 Press OPEN•CLOSE 0 button to open
the disc tray and load in a disc, then press
the same button again to close the disc
tray.
– MP3 disc on CD-R(W):
–Maximum 30 characters display.
–Supported sampling frequencies :
32 kHz, 44.1 kHz, 48 kHz
–Supported Bit-rates : 32~256 kbps
variable bitrates
● Make sure the label side is facing up.
For double-sided discs, load the side you
want to play facing up.
– Picture (JPEG) files on CD-R(W):
–JPEG/ISO 9660 format.
5 Playback will start automatically
(depending on the disc type).
● If a disc menu appears on the TV, see
“Using the Disc Menu”.
● If the disc is locked by parental control,
you must enter your four-digit password.
(See page 30).
6 At any time, simply press STO P to stop
playback.
Region Codes
ALL
DVDs must be labelled for ALL
regions or Region 4 in order to
play on this DVD system. You
cannot play discs that are labelled
for other regions.
4
Helpful Hint:
–
If you are having trouble playing a
certain disc, remove the disc and try a
different one. Improper formatted disc will
not play on this DVD Player.
17
8239 300 32131
19/03/2004, 2:56 PM
01-34 DVP533K_78
17
Disc O perations
Using the Disc Menu
Basic playback controls
Depending on the disc, a menu may
appear on the TV screen once you load
the disc.
Unless otherwise stated, all operations
described are based on the use of
Remote Control.
To select a playback feature or item
● Use the 1234or num eric keypad
(0-9) on the Remote Control, then press
PLAY Bto start playback.
Pausing playback
(DVD/VCD/CD/CD Graphics/MP3)
1 During playback, press PAUSE ;.
● Playback will pause and sound will be
muted.
To access or exit from the m enu
● Press DISC MENU on the Remote
Control.
2 Press PAUSE ;again to select the next
picture frame.
3 To re turn to normal playback, press
For VCD with Playback Control
(PBC) feature (version 2.0 only)
PLAY B.
PBC playback allows you to playVideo
CDs interactively, following the menu on
the display.
Selecting track/chapter
(DVD/VCD/CD/CD Graphics)
1 Press Tbriefly during playback to go
● In stop mode, use the num eric keypad
(0-9) to select a track and PBC will turn
off.
to the next chapter/track
2 Press Sto go to the previous track
(VCD/CD/CD Graphics) or return to the
beginning of the current chapter (SVCD/
DVD).
● Playback will start automatically
● During playback, press DISC MENU;
● If PBC was ON, it will switch to OFF
and continue playback.
● Press Stwice briefly to step back to
● If PBC was OFF, it will switch to ON
and return to menu screen.
the previous chapter (SVCD/DVD).
3 To go directly to any chapter/track, enter
the chapter/track number using the
numerical keys (0-9).
● During playback, pressing RETURN/
TITLE will return to the menu screen (if
PBC is on).
Resum ing playback from the last
stopped point (DVD/VCD/CD/CD
Graphics/MP3)
● In stop mode and when the disc has not
been ejected, press PLAY B.
To cancel resum e m ode
● In stop mode, press STO P 9again.
18
01-34 DVP533K_78
18
19/03/2004, 2:56 PM
8239 300 32131
Disc O perations
Zoom (DVD/VCD/CD Graphics/
JPEG)
Slow Motion (DVD/VCD)
1 Press 34during playback to select the
required speed: 1/2, 1/4, 1/8 or 1/16
(backward or forward).
Zooming allows you to enlarge or reduce
the video image during playback.
● Sound will be muted.
1 Press ZO O M repeatedly to increase and
decrease the playback video image.
2 To return to normal speed, press PLAY B.
2 Press 1234to pan across the TV
Helpful Hint:
screen.
–
Slow backward is not possible onVCDs.
Repeat (DVD/SVCD/VCD/CD/CD
Graphics)
Forward / Reverse Searching
(DVD/VCD/CD)
● Press REPEAT continuously to choose a
1 Press 12during playback to select the
required speed: 2X, 4X, 8X, 16X or 32X
(backward or forward).
Repeat mode during playback.
REPEAT CHAPTER (DVD)
–
to repeat playback of the current
● Sound will be muted (DVD/VCD) or
intermittent (CD).
chapter.
REPEATTRACK/TITLE (CD/CD
Graphics/SVCD/VCD/DVD)
2 To return to normal speed, press PLAY B.
–
to repeat playback of the current
track (CD/CD Graphics/SVCD/VCD)/title
(DVD).
REPEAT ALL
–
to repeat playback of all the disc and
all the programmed tracks.
SHUFFLE
–
to repeat playback at random order.
REPEAT OFF
to cancel the repeat mode.
Helpful Hint:
REPEAT function is not available forVCD
–
–
2.0 when PCB is on.
Repeat A-B (DVD/VCD/CD)
1 Press REPEAT A-B at your chosen
starting point.
2 Press REPEAT A-B again at your chosen
end point.
● The section A and B can be set only
within the same chapter/track.
● The section will now repeat continuously.
3 To exit the sequence, press REPEAT A-B.
19
8239 300 32131
19/03/2004, 2:56 PM
01-34 DVP533K_78
19
Disc O perations
Tim e Search (DVD/VCD/CD
Graphics)
Special disc features
Playing a Title (DVD)
The Time Search function allows you to
start playing at any chosen time on the
disc.
1 Press DISC MENU.
● The disc title menu appears on the TV
screen.
1 Press DISPLAY.
2 Use 341 2 keys or num eric keypad
2 Press 3 4to highlight time search box.
● The on-screen display shows the total
playing time of the title/chapter.
(0-9) to select a play option.
3 Press O K key to confirm.
Menu
Cam era Angle (DVD)
TT Time
CH Time
Repeat
0:03:01
0:01:08
Off
● Press ANGLE repeatedly to select
different desired angle.
Time Disp. TT Elapsed
Changing the Audio Language
(DVD/VCD)
Bitrate 67
TTTT EEllaappsseedd 00::1166::3355
For DVD
3 Use 2keys to select an option.
● Press AUDIO repeatedly to select
different audio languages.
4 Enter hours, minutes and seconds from
left to right in the time edit box using
remote control numerical key pad.
(e.g. 0:34:27)
Changing the Audio Channel
For VCD or CD Graphics
● Press AUDIO to select the available
audio channels provided by the disc
(STEREO, MONO LEFT, MONO RIGHT
or MIX MONO).
For DVD
● Title/Chapter Remain: displays the
remaining time of the current title/
chapter.
● Title/Chapter Elapsed: displays the
elapsed time of the current title/chapter.
Subtitles (DVD)
● Press SUBTITLE repeatedly to select
For Super VCD ,VCD or CD
Graphics
different subtitle languages.
● Total/Single Remain: displays the
remaining time of the current total/single
track.
● Total/Single Elapsed: displays the
elapsed time of the current total/single
track.
5 Press the DISPLAY key to confirm.
● Playback starts from the selected time
on the disc.
20
01-34 DVP533K_78
20
19/03/2004, 2:56 PM
8239 300 32131
Disc O perations
Preview Function
Playing MP3/JPEG Picture CD
The preview function allows you to see
the content of the Tracks (6 tracks shown
on screen at any one time).
IMPO RTANT!
You have to turn on your TV and set to
the correct Video In channel. (See page
14 “Setting up the TV”).
1 Press PREVIEW .
● The preview menu appears on the TV
screen.
General O peration
1 Load an MP3/JPEG Picture CD disc.
● The data disc menu appears on the TV
screen.
SSeelleecctt DDiiggeesstt TTyyppee::
TTiittllee DDiiggeesstt
SSeelleecctt DDiiggeesstt TTyyppee::
TTrraacckk DDiiggeesstt
CChhaapptteerr DDiiggeesstt
TTiittllee IInntteerrvvaall
DDiisscc IInntteerrvvaall
TTrraacckk IInntteerrvvaall
2 Use 34to select the folder and press
CChhaapptteerr IInntteerrvvaall
O K to open the folder.
(Video CD example)
(DVD example)
00:37 03:50 128kbps
001/162
2 Press 3 4 to select the PREVIEW type,
then press O K.
\MP3\
● The picture of each segment will
appear on the screen.
Song
1
2
3
4
5
MP3
MP3 Song
MP3 Song
MP3 Song
MP3 Song
A
D
B
E
C
F
3 Press 34or use the numeric keypad
(0-9) to highlight an option.
(example for 6 thumbnail pictures display)
4 Press O K to confirm.
3 Press 3 4 1 2 to select a track and input
your selected track number using the
numeric keypad (0-9), then press O K.
● Playback will start automatically on the
selected track.
● The playback will start from the
selected file to the end of the folder.
Playback selection
During playback, you can;
● For CDDA (Musical CD)
● Press PREVIEW to listen to the first
10 seconds of each sound track in the
disc.
● Press S / T to select another file in
the current folder.
● Use 1234 on the remote to rotate/flip
the picture files.
● For CD Graphics
● Press ; repeatedly to pause/resume
● Press PREVIEW to view and listen to
the first 10 seconds of each sound track
in the disc.
playback.
21
8239 300 32131
19/03/2004, 2:56 PM
01-34 DVP533K_78
21
Disc O perations
Repeat
Special JPEG features
Preview Function (JPEG)
● Press REPEAT continuously to access
different ‘Play Mode’.
This function shows the content of the
current folder or the whole disc.
● SINGLE: play the selected file once,
then return to the menu.
● REPEAT ONE: keep a JPEG image still on
the screen or play an MP3 file repeatedly.
● REPEAT FOLDER: play all files in the
selected folder repeatedly.
1 Press PREVIEW during playback.
● Thumbnails of 12 pictures appears on
the TV screen.
(example for 12 thumbnail pictures display)
● SHUFFLE: play all files in the selected
folder in random order.
● FOLDER : play all files in the selected
folder.
Program playback
● In Stop mode, press DISC MENU
repeatedly to toggle the menu between
Folder and Filelist.
2 Press S / T to display the other
pictures on the previous/next page.
1 When Filelist is on the screen, press 34
to select the files and press 2to add the
files to the playlist.
3 Use 1234 to highlight one of the
picture and press O K to start playback,
2 Press DISC MENU to display the playlist. 4 Press DISC MENU to return to MP3/
Picture CD menu.
3 Press 1to delete unwanted files from the
playlist.
Zoom picture (JPEG)
Helpful Hint:
● During playback, press ZO O M repeatedly
–
The disc reading time may exceed 10
to display the picture with different scales.
seconds due to large number of songs
compiled onto the disc.
● Use 1234 to view the zoomed picture.
Fast forward / reverse (MP3)
Playback with m ulti-angles (JPEG)
● During playback, press 12to fast forward
● During playback, press 3412 to rotate
the picture on the TV screen.
or reverse playback.
● To resume normal playback, press PLAY
3: flip the picture vertically
B.
4: flip the picture horizontally
1: rotate the picture anti-clockwise
2: rotate the picture clockwise
22
01-34 DVP533K_78
22
19/03/2004, 2:56 PM
8239 300 32131
Karaoke O perations
Playing Karaoke discs
Vocal
● You can fade out the original vocal from a
IMPO RTANT!
karaoke disc.
You have to turn on your TV and set to
the correct Video In channel. (See page
14 “Setting up the TV”).
● Press VOCAL repeatedly to choose
different audio modes.
For DVD karaoke discs
● AUDIO 1VOCAL,AUDIO 2VOCAL,
NO VOCAL ASSIST,VOICE CANCEL.
General O peration
1 Connect a microphone (not supplied) to
MIC on the side panel of the DVD player.
For VCD karaoke discs
● LEFTVOCAL, RIGHTVOCAL, NO
VOCAL ASSIST,VOICE CANCEL
Mode
P
PLAY/PAUSE
● Press MO DE repeatedly to toggle
between ‘Vol’,‘Echo’ or ‘Key’.
1 When ‘Vol’ is selected, press 12to adjust
the vocal value between 0 and 20.
2 Press KARAO KE repeatedly.
● ‘MIC ON/OFF’ appears on the TV
screen.
2 When ‘Echo’ is selected, press 12to
adjust the echo value between 0 and 20.
3 Load a karaoke disc and press PLAY B.
3 When ‘Key’ is selected, press 12to
adjust the pitch value between -16 and 16.
4 Adjust the microphone volume using
LEVEL button on the side panel of the
DVD player.
Helpful Hint:
–
Before connecting the microphone, set
the microphone volume to the minimum level
to prevent howling.
Key setting
● This function allows you to adjust the key
tone level to match with your vocal.
● Press KEY and use 12 to adjust the
pitch to adopt your voice.
23
8239 300 32131
01-34 DVP533K_78
23
19/03/2004, 2:56 PM
System Menu O ptions
Basic O perations
Program (not for Picture CD/MP3)
To select favourite tracks/chapters
playback in preferred sequence.
1 Press SYSTEM MENU to enter the
Setup Menu.
Program:Chapter(01-12)
2 Press O K to enter the next level
1
2
3
4
5
12
01
05
6
7
submenu or confirm your selection.
8
3 Press 1 2 to enter the submenu or
9
return to the previous menu.
10
Exit
START
NEXT
4 Press 34 to highlight the desired menu.
1 Use the num erical keypad (0-9) to
direct input the tracks or chapters (single
track number with digit ‘0’ in front, for
example ‘05’).
To exit from the m enu
Press SYSTEM MENU or select ‘Exit
Setup Menu’ and then press O K.
● The settings will be stored in the
player’s memory even if the player is
switched off.
2 Move the cursor by pressing 3 4 1 2 to
select START.
3 Press O K to start playback.
Helpful Hint:
General Setup Page
–
Program can only be selected when a
The options included in General Setup
page are:‘Program’,‘OSD Language’, and
‘Screen Saver’.
disc is inserted in the DVD player.
Screen Saver
Follow the steps below:
This function is used to turn the screen
saver on or off.
- - General Setup Page - -
Program
OSD Language
Screen Saver
- - General Setup Page - -
Program
OSD Language
Screen Saver
On
Off
Go To General Setup Page
Screen Saver
1 Press SYSTEM MENU to enter the
setup menu.
1 Press 34 to highlight ‘Screen Saver’.
2 Press 1 2 to select the‘General Setup’
2 Enter its submenu by pressing 2.
page.
3 Move the cursor by pressing 34 to
highlight the selected item.
● O n: In STOP, PAUSE or No DISC
mode, if no actions are performed about
5 minutes, the screen saver will be
activated.
NOTE:
● O ff: Screen saver is disabled.
Som e of the features in the System
Menu O ptions are described in
“Getting Started”.
24
01-34 DVP533K_78
24
19/03/2004, 2:56 PM
8239 300 32131
System Menu O ptions
Digital Audio Setup
Audio Setup Page
The options included in Audio Setup page
are:‘Speaker Setup’,‘Digital Audio Setup’,
‘Dolby Digital Setup’,‘Equalizer’ and ‘3D’.
The options included in Digital Audio
Setup are:‘Digital Output’ and ‘LPCM
Output’.
1 Press SYSTEM MENU.
1 Press the 34 keys to highlight an option.
2 Press 1 2 to select the ‘Audio Setup’ page.
2 Enter its submenu by pressing 2.
3 Move the cursor by pressing the 34 keys
to highlight the selected item.
Speaker Setup
The options included in Speaker Setup
are:‘Downmix’ and ‘D.R.C’.
- - Digital Audio Page - -
Digital Output
LPCM Output
SPDIF Off
All
1 Press the 34 keys to highlight an option.
PCM Only
2 Enter its submenu by pressing 2.
3 Move the cursor by pressing the 34 keys
to highlight the selected item.
Setup SPDIF
- - Speaker Setup Page - -
Digital O utput
Downmix
D.R.C
LT/RT
Stereo
Set the Digital output according to your
optional audio equipment connection.
● SPDIF O ff: Turn off the SPDIF output.
● All: If you have connected your
DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
Virtual Surround
Set Downmix Mode
● PCM O nly: Only if your receiver is
not capable of decoding multi-channel
audio.
Downm ix
This options allows you to set the stereo
analog output of your DVD Player.
● LT/RT: Select this option if your DVD
Player is connected to a Dolby Pro Logic
decoder.
● Stereo: Select this option when output
delivers sound from only the two front
speakers.
Helpful Hint:
–
If DIGITAL OUTPUT is set to ‘All’, all
audio settings except MUTE are invalid.
LPCM O utput
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust ‘LPCM Output’.
Discs are recorded at a certain sampling
rate.The higher the sampling rate, the
better the sound quality.
● Virtual Surround: Allows the DVD
player to use virtual surround sound
effects.
D.R.C. (Dynam ic Range Control)
Analogue sound dynamic range
compression.
● O n: Audio with fully compressed
dynamic range.
● O ff: Audio with uncompressed dynamic
range.
● 48kHz: Playback a disc recorded at the
sampling rate of 48kHz.
● 96kHz: Playback a disc recorded at the
sampling rate of 96kHz.
● Auto: Select ‘Auto’ adjust the dynamic
level automatically according to the disc
record.
Helpful Hint:
–
LPCM Output can be selected only when
PCM Only is activated.
25
8239 300 32131
19/03/2004, 2:56 PM
01-34 DVP533K_78
25
System Menu O ptions
Dolby Digital Setup
Equalizer
The options included in Dolby Digital
Setup are:‘Dual Mono’ and ‘Dynamic’.
The options included in Equalizer is:‘Sound
Mode’.
1 Press the 34 keys to highlight an option.
1 Press the 34 keys to highlight an option.
2 Enter its submenu by pressing 2.
2 Enter its submenu by pressing 2.
3 Move the cursor by pressing the 34 keys
3 Move the cursor by pressing the 34 keys
to highlight the selected item.
to highlight the selected item.
- - Equalizer Page - -
- - Dolby Digital Setup - -
Sound Mode
None
Rock
Pop
Dual Mono
Dynamic
Stereo
L-Mono
R-Mono
MIX-Mono
Live
Dance
Techno
Classic
Soft
None
Dual Mono (1 + 1) Setup
Sound Mode
Dual Mono
Select Sound Mode that matches the type
of music you played.These preset Sound
Mode adjust the frequency bands of the
audio to enhance your favourite music.
● None, Rock, Pop, Live, Dance,
Techno, Classic and Soft
To select the setting that matches the
number of speaker you have connected.
● Stereo: Left mono sound will send
output signals to Left speaker and Right
mono sound will send output signals to
Right speaker.
● L-Mono: Left mono sound will send
output signals to Left speaker and Right
speaker.
● R-Mono: Right mono sound will send
output signals to Left speaker and Right
speaker.
● Mix-Mono: Left and Right mixed
mono sound will send output signals to
Left and Right speakers.
Dynam ic
To optimise the dynamic sound output
high volume outputs are softened,
enabling you to watch your favourite
movie without disturbing others.
● The levels for dynamic selection:
Full, 3/4, 1/2, 1/4 and Off.
Helpful Hint:
–
DTS surround audio output are not
available in this DVD player.
26
01-34 DVP533K_78
26
19/03/2004, 2:56 PM
8239 300 32131
System Menu O ptions
3D Processing
TV Display
The options included in 3D Processing is:
‘Reverb Mode’.
Set the aspect ratio of the DVD Player
according to the TV you have connected.
1 Press the 34 keys to highlight an option.
1 Press 34 to highlight ‘TV Display’.
2 Enter its submenu by pressing 2.
2 Enter its submenu by pressing 2.
3 Move the cursor by pressing the 34 keys
3 Move the cursor by pressing 34 to
to highlight the selected item.
highlight the selected item.
16:9
- - 3D Processing Page - -
Reverb Mode
Off
Concert
Living Room
Hall
4:3
Bathroom
Cave
Letter Box
Arena
Church
4:3
Reverb Mode
Pan Scan
Reverb Mode
Reverb mode provides a virtual surround
sound experience using just two speakers.
● Off, Concert, Living Room , Hall,
Bathroom , Cave,Arena and Church
16:9
● If you have a wide-screen TV.
4:3 Letter Box
● If you have a normal TV. In this case, a
wide picture with black bands on the
upper and lower portions of the TV
screen will be displayed.
Helpful Hint:
–
Reverb mode will be activated when
‘Downmix’ is set to off.
4:3 Pan Scan
Video Setup Page
● If you have a normal TV and want both
sides of the picture to be trimmed or
formatted to fit your TV screen.
The options included inVideo Setup page
are:‘TV Type’,‘TV Display’,‘Closed
Captions’,‘Angle Mark’,‘Progressive’,
‘Smart Picture’ and ‘Picture Setting’.
1 Press SYSTEM MENU.
2 Press 1 2 to select the ‘Video Setup’ page.
- - Video Setup Page - -
TV Type
TV Display
Closed Captions
Angle Mark
Progressive
Smart Picture
Picture Setting
Go To Video Setup Page
27
8239 300 32131
01-34 DVP533K_78
27
19/03/2004, 2:56 PM
System m enu O ptions
Closed Captions
Progressive
Closed captions are data that are hidden
in the video signal of some discs. Captions
are different from subtitles because
captions hearing are impaired by showing
the sound effects (e.g.,“phone ringing”
and “footsteps”), while subtitles do not.
Before you select this function, please
ensure that the disc contains closed
captions information and your TV set also
has this function.
This feature is only applicable if you have
connected this DVD Player to a
Progressive Scan TV through the Y Pb Pr
jacks.
1 Press 34 to highlight ‘Progressive’.
2 Enter its submenu by pressing 2.
3 Move the cursor by pressing 34 to
highlight the selected item.
● O n: Enable Progressive Scan video.
● O ff: Disable Progressive Scan video.
1 Press 34 to highlight ‘Closed Captions’.
2 Enter its submenu by pressing 2.
Helpful Hint:
–
If a blank/distorted TV screen
3 Move the cursor by pressing 34 to
highlight the selected item.
appears, wait for 15 seconds for auto
recover.
–
the TV to confirm the selection (if
any).
● O n: Enable Closed Captions.
● O ff: Disable Closed Captions.
Follow the instructions shown on
Angle Mark
Displays current angle setting information
on the right hand corner of the TV screen
if available on the disc.
HINTS:(refer to the owner's manual)
ACTIVATING PROGRESSIVE:
1. Ensure your TV has progressive scan.
2. Connect with YPbPr(GBR) video cable.
3. If there is a blank screen on normal TV,
wait 15 seconds for auto recover.
1 Press 34 to highlight ‘Angle Mark’.
Cancel
OK
2 Enter its submenu by pressing 2.
<
>
-
Move
OK
-
Select
3 Move the cursor by pressing 34 to
highlight the selected item.
● O n: Enable Angle Mark.
● O ff: Disable the current angle setting
display.
Confirm again to use progressive scan
If picture is good press OK on remote
Cancel
OK
TO DEACTIVATE PROGRESSIVE:
1. Open tray
2. Press '1' Key
<
> - Move
OK
-
Select
28
01-34 DVP533K_78
28
19/03/2004, 2:56 PM
8239 300 32131
System Menu O ptions
Sm art Picture
Preference Page
In this menu, you can choose a picture
setting from a fixed set of predefined
picture settings.
The options included in Preference page
are:‘Audio’,‘Subtitle’,‘Disc Menu’,
‘Parental’,‘Password’ and ‘Default’.
1 Press 34 to highlight ‘Smart Picture’.
1 Press SYSTEM MENU.
2 Press 1 2 to select the ‘Preference Page’.
2 Enter its submenu by pressing 2.
3 Move the cursor by pressing 34 to
highlight the selected item.
- - Preference Page - -
● Standard: select the standard picture
setting.
● Bright: make the TV picture brighter.
● Soft: make the TV picture softer.
Audio
Subtitle
Disc Menu
Parental
Password
Default
Go To Preference Page
Picture Setting
Note:
The options included in Picture Setting
Setup page are:‘Sharpness’,‘Brightness’
and ‘Contrast’.
Preference features can be selected
only during ‘No Disc’ condition or
STOP mode.
1 Press the 34 keys to highlight an option.
2 Enter its submenu by pressing 2.
Parental
3 Move the cursor by pressing the 34 keys
Some DVDs may have a parental level
assigned to the complete disc or to
certain scenes on the disc. This feature
lets you set a playback limitation level.
The rating levels are from 1 to 8 and are
country dependent. You can prohibit the
playing of certain discs that are not
suitable for your children or have certain
discs played with alternative scenes.
to highlight the selected item.
- - Picture Setting Setup - -
Sharpness
Brightness
Contrast
High
00
00
Medium
Low
Low
● VCD, SVCD, CD have no level indication,
so parental control function has no effect
on those kinds of discs.This applies to
most illegal DVD discs.
Sharpness
You can personalize your picture colour by
adjusting sharpness, brightness or contrast.
● High: Choose high to make the
picture’s edge sharper.
1 Press 34 to highlight ‘Parental’.
2 Enter its submenu by pressing 2.
● Medium : Choose medium to get a
standard picture.
3 Use 34 to highlight a rating level for the
disc inserted.
● Low: Choose low to make the
picture’s edge softer.
● DVDs that are rated above the level
you selected will not play unless you enter
your four-digit password and choose a
higher level rating.
Brightness/Contrast
Choose a positive value to increase the
brightness/contrast level or move to a
negative value to decrease the brightness/
contrast level.
● To disable Parental controls and have
all Discs play, choose ‘Off.
29
8239 300 32131
01-34 DVP533K_78
29
19/03/2004, 2:56 PM
System Menu O ptions
Parental - cont’d
Password
This feature is used for Parental Control.
Enter your four digit password when a
hint is displayed on the screen.The default
password is 1009.
Helpful Hint:
–
Some DVDs are not encoded with a
rating though the movie rating may be
printed on the Disc cover.The rating level
feature does not work for such Discs.
1 Press 34 to highlight ‘Password’.
2 Enter its submenu by pressing 2.
Rating explanations
3 Press O K to open the ‘New Password’
1 KID SAFE
–
Kids material; recommended especially for
page.
children and viewers of all ages.
2 G
–
General Audience; recommended as acceptable
for viewers of all ages.
3 PG
Old Password
New Password
Confirm PWD
–
Parental Guidance suggested.
4 PG13
–
Material is unsuitable for children under age 13.
OK
5-6 PG-R
–
Parental Guidance - Restricted; recommended
4 Enter the existing 4-digit code.
that parents restrict children under 17 from
viewing or allow to view only when supervised by
a parent or adult guardian.
5 Enter the new 4-digit code.
7 NC-17
6 Enter the new 4-digit code a second time
to confirm.
–
No children under age 17; not recommended
viewing for children under age 17.
●The new 4 digit code will be take effect.
8 ADULT
7 Press O K to exit.
–
Mature material; should be viewed only by
adults due to graphic sexual material, violence or
language.
Helpful Hints:
–
If the password has been changed, the
O FF
parental and disc lock code will also be
changed.
–
It will play all discs.
–
The default password (1009) is always
active even the password has been changed.
Default
Setting the ‘Default’ function will reset all
options and your personal settings to the
factory defaults and all your personal
settings will be erased.
1 Press 34 to highlight ‘Default’.
2 Highlight RESET by pressing 2.
3 Press O K to confirm selection.
Caution!
– W hen this function is activated, all
settings will be reset to factory
defaults.
30
01-34 DVP533K_78
30
19/03/2004, 2:56 PM
8239 300 32131
Specifications
TV STANDARD (PAL/50Hz) (NTSC/60Hz)
AUDIO PERFO RMANCE
Number of lines
625
525
DA Converter
24 bit, 96kHz
Playback
Multistandard (PAL/NTSC)
DVD
fs 96 kHz
fs 48 kHz
fs 48 kHz
fs 44.1kHz
fs 44.1kHz
4Hz- 44kHz
4Hz- 22kHz
4Hz- 22kHz
4Hz- 20kHz
4Hz- 20kHz
> 90 dB
VIDEO PERFO RMANCE
SVCD
DA Converter
Component video
output (480i/p)
Video Output
12 bit, 54mHz
Y: 1Vpp into 75 ohm
PbPr: 0.7Vpp into 75 ohm
1Vpp — 75 ohm
CD/VCD
Signal-Noise (1kHz)
Dynamic range(1kHz)
Crosstalk (1kHz)
> 80 dB
> 80 dB
S-Video Output
Y: 1Vpp — 75 ohm
C: 0.3Vpp — 75 ohm
Distortion/noise (1kHz)
> 80 dB
MPEG MP3
MPEG Audio L3
AUDIO FO RMAT
Digital
Mpeg
compressed Digital
CO NNECTIO NS
Y Pb Pr output (480i/p)
S-Video Output
Video Output
Audio Output(L+R)
Digital Output
Dolby Digital 16, 20, 24 bits
PCM fs, 44.1, 48, 96 kHz
Cinch 3x (green, blue, red)
Mini DIN, 4 pins
Cinch (yellow)
Cinch (white/red)
1 coaxial
MP3(ISO 9660)
96, 112, 128, 256 kbps
& variable bit rate fs, 32,
44.1, 48 kHz
Analog Sound Stereo
IEC60958 for CDDA / LPCM
IEC61937 for MPEG 1/2,
Dolby Digital
Dolby Surround-compatible downmix from Dolby Digital
multi-channel sound
CABINET
Dimensions (w x h x d)
Weight
360 x 43 x 285 mm
Approximately 2.0 kg
POW ER CO NSUMPTIO N
Power inlet
Power consumption
120-230V, 50-60Hz
12 W
Power consumption in Standby mode < 1 W
Specifications subject to change without prior notice
31
8239 300 32131
19/03/2004, 2:56 PM
01-34 DVP533K_78
31
Troubleshooting
WARNING
Under no circum stances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If
you are unable to rem edy a problem by following these hints, consult your dealer or
Philips for help.
Problem
Solution
No power
– Check if the AC power cord is properly connected.
– Press the STANDBY ON on the front of the DVD
system to turn on the power.
No picture
– Refer to yourTV’s manual for correct Video In
channel selection. Change the TV channel until you
see the DVD screen.
– Check if the TV is switched on.
Distorted picture
– Sometimes a small amount of picture distortion may
appear depending on the disc being played back.This
is not a malfunction.
Com pletely distorted picture or
black/white picture with DVD
– Connect DVD Player directly to the TV.
– Make sure the disc is compatible with the DVD/
Player.
– Ensure that the DVD Player’sTVType is set to match
that of the Disc and yourTV.
No sound or distorted sound
No audio at digital output
Disc can’t be played
– Adjust the volume.
– Ensure to select stereo output on your disc (except
multichannel).
– Check that the speakers are connected correctly.
– Ensure that the DTS disc also supports Dolby Digital
output.
– Check the digital connections.
– Check if your receiver can decode MPEG-2 or DTS
and if not, please make sure the digital output is set
to PCM.
– Check if the audio format of the selected audio
language matches your receiver capabilities.
– The DVD+R/CD-R must be finalized.
– Ensure the disc label is facing up.
– Check if the disc is defective by trying another disc.
– If you have recorded a Picture CD or MP3 CD
yourself, ensure that your disc contains at least 10
pictures or 5 MP3 tracks.
– Region code incorrect.
Picture freezes m om entarily
during playback
– Check the disc for fingerprints/scratches and
clean with a soft cloth wiping from centre to edge.
No return to start-up screen when
disc is rem oved
– Reset the unit by switching the player off, then on
again.
32
01-34 DVP533K_78
32
19/03/2004, 2:56 PM
8239 300 32131
Troubleshooting
Problem
Solution
The player does not respond to
the Rem ote Control
– Aim the Remote Control directly at the sensor
on the front of the player.
– Reduce the distance to the player.
– Replace the batteries in the Remote Control.
– Re-insert the batteries with their polarities (+/–
signs) as indicated.
Buttons do not work
– To completely reset the player, unplug the AC
cord from the AC outlet for 5-10 seconds.
Player does not respond to som e
operating com m ands during playback.
– Operations may not be permitted by the disc.
Refer to the instructions of the disc jacket.
DVD Player cannot read
CDs/DVDs
– Use a commonly available cleaning CD/DVD to
clean the lens before sending the DVD Player for
repair.
Menu item s cannot be selected
– Press STOP twice before selecting System Menu.
– Depending on the disc availability, some menu items
cannot be selected.
If you are unable to remedy a problem by following these hints, consult your dealer
or service center (HOTLINE).
33
8239 300 32131
19/03/2004, 2:56 PM
01-34 DVP533K_78
33
Glossary
Analog: Sound that has not been turned into
numbers. Analog sound varies, while digital
sound has specific numerical values. These
jacks send audio through two channels, the left
and right.
Aspect ratio: The ratio of vertical and
horizontal sizes of a displayed image.The
horizontal vs. vertical ratio of conventional TVs.
is 4:3, and that of wide-screens is 16:9.
AUDIO O UT Jacks: Jacks on the back of
the DVD System that send audio to another
system (TV, Stereo, etc.).
Bit Rate: The amount of data used to hold a
given length of music; measured in kilobits per
seconds, or kbps. Or, the speed at which you
record. Generally, the higher the bit rate, or the
higher the recording speed, the better the
sound quality. However, higher bit rates use
more space on a Disc.
Chapter : Sections of a picture or a music
piece on a DVD that are smaller than titles. A
title is composed of several chapters. Each
chapter is assigned a chapter number enabling
you to locate the chapter you want.
Com ponent Video O ut Jacks: Jacks on the
back of the DVD System that send high-quality
video to a TV that has Component Video In
jacks (R/G/B, Y/Pb/Pr, etc.).
Disc m enu: A screen display prepared for
allowing selection of images, sounds, subtitles,
multi-angles, etc recorded on a DVD.
Digital: Sound that has been converted into
numerical values. Digital sound is available
when you use the DIGITAL AUDIO OUT
COAXIAL or OPTICAL jacks.These jacks send
audio through multiple channels, instead of just
two channels as analog does.
Dolby Digital: A surround sound system
developed by Dolby Laboratories containing up
to six channels of digital audio (front left and
right, surround left and right, center and
subwoofer).
Multichannel: DVD is specified to have each
sound track constitute one sound field.
Multichannel refers to a structure of sound
tracks having three or more channels.
Parental Control: A function of the DVD to
limit playback of the disc by the age of the
users according to the limitation level in each
country. The limitation varies from disc to disc;
when it is activated, playback will be prohibited
if the software’s level is higher than the user-set
level.
PCM (Pulse Code Modulation): A system
for converting analog sound signal to digital
signal for later processing, with no data
compression used in conversion.
Playback control (PBC): Refers to the
signal recorded on video CDs or SVCDs for
controlling reproduction. By using menu
screens recorded on aVideo CD or SVCD that
supports PBC, you can enjoy interactive-type
software as well as software having a search
function.
Progressive Scan: It displays all the
horizontal lines of a picture at one time, as a
signal frame. This system can convert the
interlaced video from DVD into progressive
format for connection to a progressive display.
It dramatically increases the vertical resolution.
Region code: A system for allowing discs to
be played back only in the region designated
beforehand.This unit will only play discs that
have compatible region codes. You can find the
region code of your unit by looking on the
product label. Some discs are compatible with
more than one region (or ALL regions).
S-Video: Produces a clear picture by sending
separate signals for the luminance and the
color. You can use S-Video only if your TV has
S- video In jack.
Title: The longest section of a picture or
music feature on DVD, music, etc., in video
software, or the entire album in audio software.
Each title is assigned a title number enabling
you to locate the title you want.
JPEG: A very common digital still picture
format.A still-picture data compression system
proposed by the Joint Photographic Expert
Group, which features small decrease in image
quality in spite of its high compression ratio.
MP3: A file format with a sound data
compression system.“MP3” is the abbreviation
of Motion Picture Experts Group 1 (or MPEG-
1) Audio Layer 3. By using MP3 format. one
CD-R or CD-RW can contain about 10 times
as much data volume as a regular CD can.
VIDEO O UT jack: Jack on the back of the
DVD System that sends video to a TV.
34
01-34 DVP533K_78
34
19/03/2004, 2:56 PM
8239 300 32131
|