Philips DVP5106K User Manual

DVD VIDEO PLAYER  
DVP5106K  
User manual  
Thank you for choosing Philips.  
Need help fast?  
Read your User’s Manual first for quick tips that make using  
your Philips product more enjoyable.  
If you have read your instructions and still need assistance,  
you may access our online help at www.philips.com/support  
13/06/05, 11:04DAMVP5106K/93_1  
01-42 DVP5106K_971  
1
‘CONSUMERS SHOULD NOTETHAT NOT  
ALL HIGH DEFINITIONTELEVISION SETS  
ARE FULLY COMPATIBLEWITHTHIS  
PRODUCT AND MAY CAUSE ARTIFACTS  
TO BE DISPLAYED INTHE PICTURE. IN  
CASE OF 525 OR 625 PROGRESSIVE SCAN  
PICTURE PROBLEMS, IT IS RECOMMENDED  
THATTHE USER SWITCHTHE  
CONNECTIONTOTHE ‘STANDARD  
DEFINITION’ OUTPUT. IFTHERE ARE  
QUESTIONS REGARDING OURTV SET  
COMPATIBILITYWITHTHIS MODEL 525p  
AND 625p DVD PLAYER, PLEASE CONTACT  
OUR CUSTOMER SERVICE CENTER.’  
The apparatus shall not be exposed to dripping  
or splashing and no objects filled with liquids,  
such as vases, shall be placed on apparatus.  
Due to the inconsistency of disc formats  
provided by various disc manufacturers, your  
DVD system may require a playability  
enhancement or upgrade. As DVD technology  
advances, these enhancements will become  
common and will be easy to complete.  
software upgrade.  
13/06/05, 11:04DAMVP5106K/93_1  
01-42 DVP5106K_971  
3
General Information  
Environmental Information  
Laser safety  
All unnecessary packaging has been  
omitted.The packaging has been made  
easy to separate into two materials:  
cardboard (box, buffer) and polyethylene  
(bags, protective foam sheet).  
This unit employs a laser. Due to possible  
eye injury, only a qualified service person  
should remove the cover or attempt to  
service this device.  
NOTE:  
Your DVD player consists of materials  
which can be recycled and reused if  
disassembled by a specialised company.  
Please observe the local regulations  
regarding the disposal of packaging  
materials, exhausted batteries and old  
equipment.  
PICTURES SHOWN MAYBE  
DIFFERENT BETWEEN  
COUNTRIES.  
CAUTION  
(WARNING LOCATION: ONTHE  
BACKPLATE OFTHE SET)  
NEVER MAKE OR CHANGE  
CONNECTIONSWITHTHE  
POWER SWITCHED ON.  
DivX, DivX Certified, and  
associated logos are  
trademarks of  
DivXNetworks, Inc and  
are used under license.  
Important Note:  
“DTS”, and “DTS Digital Surround” are  
registered trademarks of DigitalTheater  
Systems, Inc.  
Due to the numerous versions of new  
CD-Audio copy protection or  
enhanced CD-Audio protection  
recently available on certain discs,  
Philips is unable to guarantee that  
this DVD Player is fully compatible  
with such new discs. Should you have  
difficulty playing any such CD-Audio  
discs, kindly refer them to your CD-  
Audio disc retailer.  
Windows Media is a trademark of  
Microsoft Coporation.  
Specifications are subject to change  
without notice.Trademarks are the  
property of Koninklijke Philips Electronics  
N.V. or their respective owners.  
For Customer Use:  
LASER  
Type  
Read carefully the information located at  
the rear of your DVDVIDEO player and  
enter below the Serial No. Retain this  
information for future reference.  
Semiconductor laser  
GaAlAs  
650 nm (DVD)  
780 nm (VCD/CD)  
7 mW (DVD)  
Wave length  
Output Power  
Model No. DVP 5106K  
10 mW (VCD/CD)  
Serial No. _______________  
Beam divergence 60 degree  
13/06/05, 11:05DAMVP5106K/93_1  
01-42 DVP5106K_971  
4
Language Code  
Abkhazian  
Afar  
Afrikaans  
Amharic  
Arabic  
Armenian  
Assamese  
Avestan  
6566  
6565  
6570  
6577  
6582  
7289  
6583  
6569  
6589  
6590  
7783  
6665  
6669  
6678  
6672  
6673  
7866  
6683  
6682  
6671  
7789  
6983  
6765  
6772  
6769  
Inupiaq  
Irish  
Íslenska  
Italiano  
Ivrit  
Japanese  
Javanese  
Kalaallisut  
Kannada  
Kashmiri  
Kazakh  
Kernewek  
Khmer  
7375  
7165  
7383  
7384  
7269  
7465  
7486  
7576  
7578  
7583  
7575  
7587  
7577  
8287  
7589  
7586  
7579  
Pushto  
8083  
8285  
8185  
8277  
8279  
8278  
8377  
8371  
8365  
8367  
8382  
8378  
8381  
8368  
8373  
8373  
8376  
8379  
8384  
7882  
8385  
7073  
8387  
8383  
8386  
8476  
8489  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8483  
8478  
8482  
8475  
8487  
8571  
8575  
8582  
8590  
8673  
8679  
8765  
6789  
8779  
8872  
8973  
8979  
9085  
Russian  
Quechua  
Raeto-Romance  
Romanian  
Rundi  
Samoan  
Sango  
Sanskrit  
Sardinian  
Serbian  
Shona  
Aymara  
Azerhaijani  
Bahasa Melayu  
Bashkir  
Belarusian  
Bengali  
Bihari  
Bislama  
Bokmål, Norwegian  
Bosanski  
Brezhoneg  
Bulgarian  
Burmese  
Castellano, Español  
Catalán  
Chamorro  
Chechen  
Chewa; Chichewa; Nyanja7889  
9072  
Chuang; Zhuang  
Church Slavic; Slavonic 6785  
Chuvash  
Corsican  
Česky  
Shqip  
Sindhi  
Kinyarwanda  
Kirghiz  
Komi  
Sinhalese  
Slovensky  
Slovenian  
Somali  
Sotho; Southern  
South Ndebele  
Sundanese  
Suomi  
Swahili  
Swati  
Svenska  
Tagalog  
Tahitian  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga (Tonga Islands)  
Tsonga  
Tswana  
Türkçe  
Turkmen  
Twi  
Uighur  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapuk  
Walloon  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Korean  
Kuanyama; Kwanyama 7574  
Kurdish  
Lao  
Latina  
Latvian  
Letzeburgesch;  
Limburgan; Limburger 7673  
Lingala  
Lithuanian  
Luxembourgish;  
Macedonian  
Malagasy  
Magyar  
Malayalam  
Maltese  
Manx  
Maori  
Marathi  
Marshallese  
Moldavian  
Mongolian  
Nauru  
Navaho; Navajo  
Ndebele, North  
Ndebele, South  
Ndonga  
Nederlands  
Nepali  
Norsk  
Northern Sami  
North Ndebele  
Norwegian Nynorsk;  
Occitan; Provencal  
Old Bulgarian;Old Slavonic 6785  
Oriya  
Oromo  
Ossetian; Ossetic  
Pali  
Panjabi  
Persian  
Polski  
Português  
7585  
7679  
7665  
7686  
7666  
7678  
7684  
7666  
7775  
7771  
7285  
7776  
7784  
7186  
7773  
7782  
7772  
7779  
7778  
7865  
7886  
7868  
7882  
7871  
7876  
7869  
7879  
8369  
7868  
7878  
7967  
9065  
6786  
6779  
6783  
6865  
6869  
6890  
6978  
6979  
6984  
6985  
6976  
7079  
7082  
7089  
7074  
Dansk  
Deutsch  
Dzongkha  
English  
Esperanto  
Estonian  
Euskara  
ꢀꢁꢁꢂꢃꢄꢅꢆ  
Faroese  
Français  
Frysk  
Fijian  
Gaelic; Scottish Gaelic 7168  
Gallegan  
Georgian  
Gikuyu; Kikuyu  
Guarani  
Gujarati  
Hausa  
Herero  
Hindi  
Hiri Motu  
Hrwatski  
Ido  
7176  
7565  
7573  
7178  
7185  
7265  
7290  
7273  
7279  
6779  
7379  
7982  
7977  
7983  
8073  
8065  
7065  
8076  
8084  
Interlingua (International)7365  
Interlingue  
Inuktitut  
7365  
7385  
5
13/06/05, 11:05DAMVP5106K/93_1  
01-42 DVP5106K_971  
5
Contents  
Language Code................................................... 5  
Disc Operations  
Playable Discs ................................................. 19  
Region Codes ................................................. 19  
Playing discs..................................................... 19  
Basic playback controls................................. 20  
Selecting various repeat/shuffle functions 20  
Repeat play mode ......................................... 20  
Repeating a section within a chapter/track .  
......................................................................... 20  
Operations for video playback ................... 21  
Using the Disc Menu.................................... 21  
Zooming in ..................................................... 21  
Resuming playback from the last stopped  
point ................................................................ 21  
Slow motion................................................... 21  
Using the OSD menu .................................. 21  
Special DVD features .................................... 22  
Playing aTitle ................................................. 22  
Camera Angle ................................................ 22  
Changing the Audio Language .................... 22  
Subtitles .......................................................... 22  
SpecialVCD & SVCD Features ............. 22-23  
Playback Control (PBC) .............................. 22  
Preview ........................................................... 23  
Playing DivX disc ........................................... 23  
Playing MP3/Windows Media™ Audio/  
MPEG-4/JPEG/Kodak Picture CD .............. 24  
General Operation....................................... 24  
Selecting a folder and track/file ................. 24  
Special picture disc features ........................ 25  
Preview Function .......................................... 25  
Zoom picture ................................................ 25  
Playback with multi-angles .......................... 25  
Scan Effect ...................................................... 25  
Playing MP3/Windows Media™ Audio music  
and JPEG picture simultaneously............... 25  
Introduction  
Supplied accessories ....................................... 8  
Care and safety information.......................... 8  
Connections  
ConnectingTV............................................ 9-10  
Using CompositeVideo jacks (CVBS)........ 9  
Using ComponentVideo jacks (Pr PbY) ... 9  
Using an accessory RF modulator ............ 10  
Connecting the power cord........................ 10  
Optional: Connecting to a Multi-channel  
Receiver ........................................................... 11  
Receiver has a Dolby Digital or DTS  
decoder........................................................... 11  
Optional : Connecting to an Audio System .  
........................................................................... 11  
Stereo system has Dolby Pro Logic or Right  
/ Left Audio In jack ....................................... 11  
Optional: Connecting Digital AV Receiver ...  
........................................................................... 12  
Receiver has a PCM, Dolby Digital, or  
MPEG2 decoder............................................ 12  
Functional Overview  
Front and Rear Panels .................................. 13  
Remote Control ............................................ 14  
Getting Started  
Step 1: Inserting batteries into the  
Remote Control ............................................ 15  
Using the Remote Control to operate the  
Player ............................................................... 15  
Step 2: Setting up theTV ........................15-17  
Setting up Progressive Scan feature (for  
Progressive ScanTV only)........................... 16  
To deactivate Progressive manually .......... 17  
Selecting the colour system that  
corresponds to yourTV.............................. 17  
Step 3: Setting language preference ........... 18  
Setting the OSD Language.......................... 18  
Setting the Audio, Subtitle and Disc menu  
language .......................................................... 18  
Karaoke Operations  
Playing Karaoke discs .................................... 26  
General Operation....................................... 26  
Key setting...................................................... 26  
Vocal ................................................................ 26  
Mode ............................................................... 26  
6
13/06/05, 11:05DAMVP5106K/93_1  
01-42 DVP5106K_971  
6
Contents  
DVD Menu Options  
General Setup menu ...............................27-28  
Locking/Unlocking the disc for viewing ... 27  
Dimming system’s display screen .............. 27  
Programming disc tracks.......................27-28  
OSD Language............................................... 28  
Screen Saver - turning on/off ..................... 28  
Sleep ................................................................ 28  
DivXVOD registration code ..................... 28  
Audio Setup Menu ...................................29-31  
Analogue output ........................................... 29  
Digital Audio Setup....................................... 29  
Sound Mode................................................... 30  
Speaker Setup ................................................ 30  
CD Upsampling ............................................. 30  
Night Mode - turning on/off....................... 31  
Video Setup Menu ...................................31-33  
TVType ........................................................... 31  
Setting theTV Display ................................. 32  
Progressive - turning on/off ........................ 32  
Picture Setting ............................................... 33  
Preference Page........................................ 34-36  
Audio, Subtitle, Disc Menu.......................... 34  
Restricting playback by Parental Control.....  
......................................................................... 34  
PBC .................................................................. 35  
MP3/JPEG Menu - turning on/off............... 35  
Changing the Password ............................... 36  
Setting the DivX Subtitle ............................ 36  
Restoring to original settings ..................... 36  
Sound andVolume Controls  
Setting the speakers’ channels .................... 37  
Troubleshooting ......................... 38–39  
Specifications ...................................... 40  
Glossary ......................................................................41  
7
13/06/05, 11:05DAMVP5106K/93_1  
01-42 DVP5106K_971  
7
Introduction  
G Do not block the vents  
Supplied accessories  
– Do not operate the DVD Player in an  
enclosed cabinet, allow about 10 cm (4  
inch) of free space all around the player  
for adequate ventilation.  
Composite video  
cable (yellow)  
10 cm  
(4 inches)  
10 cm  
(4 inches)  
PHILIPS  
10 cm  
(4 inches)  
Audio cable  
(white, red)  
G Care of the cabinet  
– Use a soft cloth slightly moistened with  
a mild detergent solution. Do not use a  
solution containing alcohol, spirits,  
ammonia or abrasives.  
G Finding a suitable location  
– Place the player on a flat, hard, and  
stable surface.  
Remote Control  
and  
two AA batteries  
– Install this system near the AC outlet  
and where the AC power plug can be  
reached easily.  
PREVIEW MUTE  
DIM  
SLEEP SOUND SURROUND  
G Disc handling  
To clean a CD, wipe it in a  
straight line from the center  
towards the edge using a soft,  
lint-free cloth. A cleaning  
agent may damage the disc!  
– Write only on the printed side of a  
CDR(W) and only with a soft felt-tipped pen.  
– Handle the disc by its edge, do not  
touch the surface.  
Care and safety information  
G Power consumption  
– When the system is switched to  
Standby mode, it is still consuming power.  
To disconnect the system from the power  
supply completely, remove the AC power  
plug from the wall jack.  
G Avoid high temperatures, moisture,  
water and dust  
– Do not expose the player, batteries or  
discs to humidity, rain, sand or excessive  
heat (caused by heating equipment or  
direct sunlight.)  
G Avoid condensation problem  
– The lens may cloud over when the  
player is suddenly moved from cold to  
warm surroundings, making it impossible  
to play a disc. Leave the player in the  
warm environment until the moisture  
evaporates.  
8
13/06/05, 11:29DAMVP5106K/93_1  
01-42 DVP5106K_971  
8
Connections  
ConnectingTV  
COMPONENT  
VIDEO IN  
S-VIDEO  
IN  
COMPONENT  
VIDEO IN  
V
U
(Pr/Cr)  
AUDIO  
IN  
S-VIDEO  
V
U
Y
(Pr/Cr)  
AUDIO  
IN  
(Pb/Cb)  
VIDEO IN  
(Pb/Cb)  
VIDO IN  
COMPONENT  
VIDEO IN  
Y
S-VIDEO  
IN  
V
U
(Pr/Cr)  
AUDIO  
OUT  
COMPONENT  
VIDEO IN  
(Pb/Cb)  
S-VIDEO  
IN  
V
I
D
E
O
I
N
V
U
(Pr/Cr)  
AUDIO  
IN  
Y
(Pb/Cb)  
V
I
D
E
O
I
N
Y
1
2
1
2
IMPORTANT!  
– The progressive scan video  
quality is only possible when usingY  
Pb Pr and a progressive scanTV is  
required.  
IMPORTANT!  
You only need to make one video  
connection from the following  
options, depending on the  
capabilities of yourTV system.  
– Connect the DVD system directly  
to theTV.  
Using ComponentVideo jacks  
(Y Pb Pr)  
Using CompositeVideo jacks  
(CVBS)  
1 Use the component video cables (red/  
blue/green) to connect the DVD system’s  
Y Pb Pr jacks to the corresponding  
1 Use the composite video cable (yellow) to  
connect the DVD Player’s CVBS (VIDEO)  
jack to the video input jack (or labeled as  
A/V In,Video In, Composite or Baseband)  
on theTV (cable supplied).  
Component video input jacks (or labeled  
asY Pb Pr) on theTV (cable not supplied).  
2 To hear the sound of this DVD Player  
through yourTV, use the audio cables  
(white/red) to connect AUDIO OUT (L/  
R) jacks of the DVD Player to the  
corresponding AUDIO IN jacks on theTV  
(cable supplied).  
2 To hear the sound of this DVD Player  
through yourTV, use the audio cables  
(white/red) to connect AUDIO OUT (L/  
R) jacks of the DVD Player to the  
corresponding AUDIO IN jacks on theTV  
(cable supplied).  
3 Proceed to page 16 for detailed  
Progressive Scan set up.  
9
13/06/05, 11:05DAMVP5106K/93_1  
01-42 DVP5106K_971  
9
Connections  
Connecting the power cord  
RF coaxial cable toTV  
2
Back of RF Modulator  
(example only)  
INT IN  
TO TV  
AUDIO IN  
VIDEO  
IN  
R
L
CH3 CH4  
COMPONENT  
VIDEO IN  
S-VIDEO  
IN  
V
U
Y
(Pr/Cr)  
AUDIO  
OUT  
~
AC MAINS  
(Pb/Cb)  
VIDEO IN  
Antenna or  
CableTV signal  
1
IMPORTANT!  
After everything is connected  
properly, plug in the AC power cord  
to the power outlet.  
Never make or change any connections  
with the power switched on.  
– If yourTV only has a single  
Antenna In jack (or labeled as 75  
ohm or RF In,) you will need an RF  
modulator in order to view the DVD  
playback on theTV. See your  
electronics retailer or contact  
Philips for details on RF modulator  
availability and operations.  
When no disc is loaded, press  
STANDBY ON on the DVD Player  
front panel,  
EJECT” may appear on the display  
panel.  
Using an accessory RF modulator  
1 Use the composite video cable (yellow) to  
connect the DVD Player’s CVBS jack to  
the video input jack on the RF modulator.  
EJECT  
EJECT  
2 Use the RF coaxial cable (not supplied) to  
connect the RF modulator to yourTV’s  
RF jack.  
Helpful Hint:  
Refer to the typeplate on the rear or  
bottom of the product for identification and  
supply ratings.  
10  
13/06/05, 11:29DAMVP5106K/93_1  
01-42 DVP5106K_971  
10  
Connections  
Optional: Connecting to a Multi-  
channel Receiver  
Optional: Connecting to an  
Audio System  
STEREO  
AUDIO  
IN  
MULTICHANNEL AUDIO IN  
FRONT  
REAR  
CENTER  
AV Receiver  
DIGITAL  
R
L
R
FRONT  
EAR  
SUBW.  
Stereo system has Dolby Pro Logic  
or Right / Left Audio In jack  
Receiver has a Dolby Digital or DTS  
decoder  
1 Select one of the video connections  
(CVBSVIDEO IN, SCART or  
1 Select one of the video connections  
(CVBSVIDEO IN, S-VIDEO IN, SCART or  
COMPONENTVIDEO IN) depending on  
the options available on yourTV.  
COMPONENTVIDEO IN) depending on  
the options available on yourTV.  
2 Connect the Audio Out Left and Right  
jack for Front and Rear speakers to the  
corresponding input sockets on your  
Receiver (cable not supplied).  
2 Use the audio cables (white/red) to  
connect AUDIO OUT (L/R) jacks of  
the DVD Player to the corresponding  
AUDIO IN jacks on the stereo system  
(cable supplied).  
3 Connect the Audio Out for Center  
speaker and Subwoofer to the  
corresponding inputs on your Receiver  
(cable not supplied).  
4 Set the DVD Player’s Analog Output to  
‘Multichannel’ to enable playback of DVDs  
recorded in Multi-channel. (see page 29  
Setting the analogue output).  
Helpful Hint:  
If the subwoofer is equipped with its own  
amplifier, the Subwoofer connection should  
be connected directly to the subwoofer.  
11  
13/06/05, 11:05DAMVP5106K/93_1  
01-42 DVP5106K_971  
11  
Connections  
Optional: Connecting Digital AV  
Receiver  
AV Receiver  
AUDIO  
IN  
DIGITAL  
Receiver has a PCM, Dolby Digital,  
or MPEG2 decoder  
1 Select one of the video connections  
(CVBSVIDEO IN, SCART or  
COMPONENTVIDEO IN) depending on  
the options available on yourTV.  
2 Connect the COAXIAL jack of the DVD  
Player to the corresponding Digital Audio  
In jack on your Receiver (cable not  
supplied).  
3 Set the DVD Player’s Digital Output to  
PCM-ONLY or ALL depending on the  
capabilities of your Receiver (see page 29  
Digital Output).  
Helpful Hint:  
If the audio format of the Digital Output  
does not match the capabilities of your  
receiver, the receiver will produce a strong,  
distorted sound or no sound at all.  
12  
13/06/05, 11:05DAMVP5106K/93_1  
01-42 DVP5106K_971  
12  
Functional Overview  
Front and Rear Panels  
T NEXT  
To search or select next chapter or track  
PREV S  
To search or select previous chapter or  
track  
STANDBY-ON B  
To switch the DVD Player to Standby  
mode or ON  
9 STOP  
To stop playback  
Disc slot  
Insert disc here  
2;PLAY  
To start or interrupt playback  
EJECT /  
To eject the disc  
IR Sensor  
– Point the remote control towards this  
sensor  
Display  
Shows the current status of the DVD  
Player  
EJECT  
MIC  
– For connecting microphone  
LEVEL  
– Microphone volume control  
Multichannel Audio Out  
Mains (AC Power Cord)  
– Center speaker, subwoofer, front  
and rear speakers multichannel  
connection  
Connect to a standard AC outlet  
VIDEO OUT (CVBS)  
Connect to CVBSVideo input of aTV  
COAXIAL (Digital audio out)  
– Connect to coaxial AUDIO input of a  
digital audio equipment  
YPbPr (Component Video Out)  
Connect toYPbPr input of aTV  
Caution: Do not touch the inner pins of the jacks on the rear panel.  
Electrostatic discharge may cause permanent damage to the unit.  
13  
13/06/05, 11:05DAMVP5106K/93_1  
01-42 DVP5106K_971  
13  
Functional Overview  
Remote Control  
RETURN / TITLE  
To go back to previous menu /  
show title menu  
POWER B  
To switch the DVD player to  
standby mode or ON  
DISC MENU  
– Enters or exits the disc contents  
menu  
0-9 numerical key pad  
Selects numbered items in a  
menu  
– Switches on or off the playback  
control mode (forVCD version  
2.0 only)  
DISPLAY  
Displays information onTV  
screen during playback  
1 2 3 4  
– Selects an item in the menu/  
fast backward/forward, slow forward/  
backward  
SYSTEM MENU  
Access or exit DVD Player’s  
system menu  
PREVIEW MUTE  
OK  
KARAOKE  
KEY  
VOCAL  
MODE  
Acknowledge menu selection  
T
To search or select next chapter  
or track  
S
To search or select previous  
chapter or track  
SUBTITLE  
To access subtitle language in disc  
menu  
STOP ( 9 )  
To stop playback  
ANGLE  
PLAY ( B )  
To start playback  
Selects a DVD camera angle  
ZOOM  
PAUSE ( ; )  
To pause playback temporarily /  
frame-by-frame playback  
Enlarge or reduce a picture on  
theTV screen  
AUDIO  
To access audio language in disc  
menu  
REPEAT  
– Selects various repeat modes  
REPEAT (A-B)  
– Repeats playback a specific section  
on a disc  
KARAOKE  
To set MIC on or off  
KEY  
PREVIEW  
To preview the content of a track  
or whole disc  
To set key control  
VOCAL  
Choose audio channels or  
karaoke methods  
MUTE  
– Disables or enables sound output  
MODE  
To toggle between ‘Vol’,‘Echo’ or  
‘Key’  
Helpful Hint:  
Press “STOP” for few seconds to eject  
the disc.  
14  
13/06/05, 11:05DAMVP5106K/93_1  
01-42 DVP5106K_971  
14  
Getting Started  
Step 2: Setting up theTV  
Step 1: Inserting batteries into  
the Remote Control  
IMPORTANT!  
Make sure you have completed all  
the necessary connections. (See  
pages 9-10 ConnectingTV).  
3
1
2
1 Turn on theTV and set to the correct  
video-in channel. You should see the  
Philips DVD background screen on the  
TV.  
1 Open the battery compartment.  
2 Usually these channels are between the  
lowest and highest channels and may be  
called FRONT,A/V IN, orVIDEO. See your  
TV manual for more details.  
2 Insert two batteries type R06 or AA,  
following the indications (+-) inside  
the compartment.  
3 Close the cover.  
Or, you may go to channel 1 on your  
TV, then press the Channel down button  
repeatedly until you see theVideo In  
channel.  
Or, theTV Remote Control may have a  
button or switch that chooses different  
video modes.  
Using the Remote Control to  
operate the Player  
1 Aim the Remote Control  
directly at the remote  
sensor (IR) on the front  
panel.  
Or, set theTV to channel 3 or 4 if you  
are using an RF modulator.  
3 If you are using external equipment, (eg.  
audio system or receiver), turn it on and  
select the appropriate input source for  
the DVD Player output. Refer to the  
equipment owner’s manual for detail.  
2 Do not put any objects  
between the Remote  
Control and the DVD  
Player while operating  
the DVD Player.  
CAUTION!  
Remove batteries if they are  
exhausted or if the Remote Control  
is not being used for a long time.  
Do not use old and new or  
different types of batteries in  
combination.  
Batteries contain chemical  
substances, so they should be  
disposed properly.  
15  
13/06/05, 11:05DAMVP5106K/93_1  
01-42 DVP5106K_971  
15  
Getting Started  
7 Select {PROGRESSIVE} to {ON}, then OK  
Setting up Progressive Scan feature  
(for Progressive ScanTV only)  
to confirm.  
The instruction menu appears on the  
TV.  
The progressive scan display twice the  
number of frames per seconds than  
interlaced scanning (ordinary normalTV  
system).With nearly double the number  
of lines, progressive scan offers higher  
picture resolution and quality.  
ACTIVATING PROGRESSIVE SCAN:  
1. ENSURE YOUR TV HAS PROGRESSIVE SCAN.  
2. CONNECT USING YPBPR (GBR) VIDEO CABLE.  
3. IF THERE IS DISTORTED PICTURE  
WAIT 15 SECONDS FOR AUTO RECOVERY.  
IMPORTANT!  
Before enabling the progressive scan  
feature, you must ensure:  
Cancel  
OK  
1)YourTV can accept progressive signals,  
a progressive scanTV is required.  
2)You have connected the DVD player to  
yourTV usingY Pb Pr (see page 9.)  
OK  
8 Press 1 to highlight  
in the menu  
and press OK to confirm.  
There will be a distorted picture on  
yourTV at this state until you turn  
on the progressive scan mode on  
yourTV.  
1 Turn on yourTV.  
2 Turn off yourTV progressive scan mode  
or turn on interlaced mode (refer to your  
TV user manual.)  
9 Turn on yourTV progressive scan mode  
(refer to yourTV user manual.)  
The below menu appears on theTV.  
3 Press POWER on the remote control to  
turn on the DVD player.  
CONFIRM AGAIN TO USE PROGRESSIVE  
SCAN. IF THE PICTURE IS GOOD,  
PRESS OK BUTTON ON REMOTE  
4 Select the correctVideo Input channel.  
(See page 15).  
The DVD background screen appears  
on theTV.  
Cancel  
OK  
OK  
5 Press SYSTEM MENU.  
0 Press 1 to highlight  
in the menu  
6 Press 2repeatedly to select {VIDEO  
and press OK to confirm.  
The set up is complete now and you  
SETUP PAGE}.  
can start enjoy the high quality picture.  
- - Video Setup Page - -  
TV Type  
TV Display  
Progressive  
On  
Off  
Picture Setting  
Set Interlace TV Mode  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
16  
13/06/05, 11:05DAMVP5106K/93_1  
01-42 DVP5106K_971  
16  
Getting Started  
4 Press 3 4 to highlight one of the options  
To deactivate Progressive manually  
below:  
G When the distorted picture still  
appears on theTV, it may be due to  
the connectedTV does not accept  
progressive signals, and progressive is set  
by mistake. You must reset the unit to  
interlace format.  
PAL – Select this if the connectedTV is  
PAL system. It will change the video signal  
of a NTSC disc and output in PAL format.  
NTSC – Select this if the connectedTV  
is NTSC system. It will change the video  
signal of a PAL disc (VCD only) and  
output in NTSC format.  
1 Turn off yourTV progressive scan mode  
or turn on to interlaced mode (refer to  
yourTV user manual.)  
Multi – Select this if the connectedTV is  
compatible with both NTSC and PAL  
(multi-system). The output format will be  
in accordance with the video signal of the  
disc.  
2 Press and hold EJECT on the DVD  
player.  
3 When the disc is ejected, press and hold  
EJECT again, and numeric keypad 1’  
on the remote control at the same time  
for few seconds.  
5 Select an item and press OK.  
Helpful Hints:  
Before changing the currentTV  
The DVD blue background screen  
will appear on theTV.  
Standard setting, ensure that yourTV  
supports the ‘selectedTVType’ system.  
If there is no proper picture on  
Selecting the colour system that  
corresponds to yourTV  
yourTV, wait for 15 seconds for auto  
recovery.  
This DVD Player is compatible with both  
NTSC and PAL. In order for a DVD disc  
to play on this Player, the colour system of  
the Disc, theTV and the DVD Player  
should match.  
CHANGING PAL TO NTSC:  
1. ENSURE THAT YOUR TV SUPPORTS  
NTSC STANDARD.  
2. IF THERE IS DISTORTED PICTURE  
DISPLAYED ON THE TV, WAIT 15  
SECONDS FOR AUTO RECOVERY.  
OK  
CANCEL  
CANCEL  
- - Video Setup Page - -  
TV Type  
PAL  
CONFIRM AGAIN TO USE NEW TV  
TYPE SETTING.  
TV Display  
Progressive  
Picture Setting  
Multi  
NTSC  
OK  
NTSC TV  
1 Press SYSTEM MENU.  
2 Press 2repeatedly to select {VIDEO  
SETUP PAGE}.  
3 Press 3 4 to highlight {TVTYPE}, then  
press 2.  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
17  
13/06/05, 11:05DAMVP5106K/93_1  
01-42 DVP5106K_971  
17  
Getting Started  
Step 3: Setting language  
preference  
Setting the Audio, Subtitle and Disc  
menu language  
You can choose your own preferred  
language or soundtrack from audio,  
subtitles and disc menu languages. If the  
language selected is not available on the  
disc, the disc’s default language will be  
used instead.  
You can select your preferred language  
settings.This DVD Player will  
automatically switch to the language for  
you whenever you load a disc.  
Setting the OSD Language  
The On-screen language for the system  
menu will remain as you set it, regardless  
of various disc languages.  
- - Preference Page - -  
Audio  
English  
Chinese  
French  
Subtitle  
Disc Menu  
Parental  
PBC  
Spanish  
Portuguese  
Polish  
- - General Setup Page - -  
Disc Lock  
Display Dim  
Program  
Mp3/Jpeg Nav  
Password  
Italian  
OSD Language  
Screen Saver  
Sleep  
ENGLISH  
Set Preference To English  
DIVX(R) Vod Code  
1 Press STOP twice then, press SYSTEM  
MENU.  
Set OSD Language English  
2 Press 2repeatedly to select  
{PREFERENCE PAGE}.  
1 Press SYSTEM MENU.  
3 Press 34 to highlight one of the options  
below at a time, then press 2.  
– ‘Audio’ (disc’s soundtrack)  
– ‘Subtitle’ (disc’s subtitles)  
2 Press 2to select {GENERAL SETUP  
PAGE}.  
3 Press 3 4 to highlight {OSD  
LANGUAGE}, then press 2.  
– ‘Disc Menu’ (disc’s menu)  
4 Press 34 to select a language and press  
4 Press 34 to select a language and press  
OK.  
OK.  
If the language you want is not in the  
list, then select {OTHERS},  
then use the numeric keypad (0-9) on  
the remote to enter the 4-digit language  
code ‘XXXX’ (see page 5 “Language  
Code”) and press OK.  
5 Repeat steps 3~4 for other language  
settings.  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
18  
13/06/05, 11:05DAMVP5106K/93_1  
01-42 DVP5106K_971  
18  
Disc Operations  
IMPORTANT!  
Region Codes  
– If the inhibit icon (ø) appears on  
theTV screen when a button is  
pressed, it means the function is not  
available on the current disc or at  
the current time.  
– Depending on the DVD orVIDEO  
CD, some operations may be  
different or restricted.  
DVD discs must be labeled for ALL  
regions or Region 5 in order to  
play on this Player.You cannot play  
Discs that are labeled for other  
regions.  
ALL  
5
Helpful Hints:  
It may not be possible to play CD-R/RW  
– Do not push on the disc tray or  
put any objects other than disc on  
the disc tray. Doing so may cause  
the disc player malfunction.  
or DVD-R/RW in all cases due to the type of  
disc or condition of the recording.  
If you are having trouble playing a  
certain disc, remove the disc and try a  
different one. Improper formatted disc will  
not play on this DVD Player.  
Playable Discs  
Your DVD Player will play:  
– DigitalVideo Discs (DVDs)  
– Video CDs (VCDs)  
– SuperVideo CDs (SVCDs)  
– DigitalVideo Discs +  
Playing discs  
1 Connect the power cords of the DVD  
Player andTV (and any optional stereo or  
AV receiver) to a power outlet.  
Recordable[Rewritable] (DVD+R[W])  
– Compact Discs (CDs)  
2 Turn on theTV power and set to the  
correctVideo In channel. (See page 15  
“Setting up theTV”).  
– MP3/Windows Media™ Audio discs,  
picture (Kodak, JPEG) files on CD-R(W).  
– JPEG/ISO 9660 format  
– Maximum 30 characters display.  
– Supported sampling frequencies :  
32 kHz, 44.1 kHz, 48 kHz (MPEG-1)  
16 kHz, 22.05 kHz, 24 kHz (MPEG-2)  
– Supported Bit-rates : 32~256 kbps  
(MPEG-1), 8~160 kbps (MPEG-2)  
variable bitrates  
3 Press STANDBY-ON on the DVD Player  
front panel.  
You should see the Philips DVD  
background screen on theTV.  
4 Insert a disc in the disc slot.  
Make sure the label side is facing up.  
For double-sided discs, load the side you  
want to play facing up.  
– MPEG-4 disc on CD-R(W):  
– Simple profile  
– Advanced simple profile (640-480)  
– DivX disc on CD-R[W]/DVD+R[W]:  
– DivX 3.11, 4.x and 5.x  
– Q-pel accurate motion compensation  
– Global Motion Compensation (GMC)  
playback  
5 Playback will start automatically. If not  
press PLAY B.  
If a disc menu appears on theTV, see  
page 21 “Using the Disc Menu”.  
If the disc is locked by parental control,  
you must enter your six-digit password.  
(See page 36).  
6 Press EJECT / to eject or reload the  
disc.  
TIPS:  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
19  
DVP5106K/93_1  
21/06/05, 4:53 PM  
01-42 DVP5106K_971  
19  
Disc Operations  
Selecting various repeat/shuffle  
functions  
Basic playback controls  
Unless otherwise stated, all operations  
described are based on Remote Control  
use.  
Repeat play mode  
G While playing a disc, press REPEAT  
Pausing playback  
continuously to choose a ‘Play Mode’.  
1 During playback, press PAUSEÅ.  
Playback will pause and sound will be  
muted.  
CHAPTER (DVD)  
to repeat playback of the current  
chapter.  
2 To resume normal playback, press  
TRACK/TITLE (CD/SVCD/VCD/DVD)  
PLAY B.  
to repeat playback of the current  
track (CD/SVCD/VCD)/title (DVD).  
Selecting track/chapter  
ALL  
G Press S/ Tor use the numeric  
keypad (0-9) to key in a track/chapter  
number.  
to repeat playback of all the disc and  
all the programmed tracks.  
SHUFFLE  
Pressing S/ T will replay the  
same track/chapter.  
to playback at random order.  
to cancel the repeat mode.  
OFF  
Searching backward/forward  
G Press 1/ 2, then press PLAY Bto  
resume normal playback.  
Helpful Hint:  
ForVCD, repeat playback is not possible  
While searching, pressing 1/ 2  
repeatedly again will decrease/increase  
the search speed.  
if the PBC mode is switched on.  
Repeating a section within a  
chapter/track  
Stopping playback  
G Press Ç.  
1 While playing a disc, press REPEAT A-B  
at your chosen starting point.  
2 Press REPEAT A-B again at your chosen  
end point.  
The section A and B can be set only  
within the same chapter/track.  
The section will now repeat  
continuously.  
3 To exit the sequence, press REPEAT  
A-B.  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
TIPS:  
20  
13/06/05, 11:05DAMVP5106K/93_1  
01-42 DVP5106K_971  
20  
Disc Operations  
Slow Motion  
Operations for video playback  
(DVD/VCD/SVCD)  
1 Press 34during playback to select the  
required speed: 1/2, 1/4, 1/8 or 1/16  
(backward or forward).  
Using the Disc Menu  
Depending on the disc, a menu may  
appear on theTV screen once you load in  
the disc.  
Sound will be muted.  
2 To return to normal speed, press PLAY B.  
Helpful Hint:  
To select a playback feature or item  
Slow backward is not possible onVCDs.  
G Use 1234keys or numeric keypad  
(0-9) on the remote, then press OK to  
start playback.  
Using the OSD menu  
OSD menu shows the disc playback  
information (for example, title or chapter  
number, elapsed playing time, audio/  
subtitle language), a number of operations  
can be done without interrupting disc  
playback.  
To access or remove the menu  
G Press DISC MENU on the remote.  
Zooming in  
This function allows you to enlarge the  
picture on theTV screen and to pan  
through the enlarged picture.  
1 During playback, press DISPLAY.  
A list of available disc information  
appears on theTV screen.  
1 During playback, press ZOOM  
repeatedly to display the picture with  
different scales.  
Menu  
Title  
01/01  
09/12  
2CH  
Off  
Chapter  
Audio  
Subtitle  
Chinese  
Use 1234keys to pan through the  
enlarged picture.  
Bitrate 61  
Title Remain 0:48:59  
Playback will continue.  
Menu  
Track  
Disc Time 0:48:53  
Track Time 0:48:53  
Repeat  
2 Press ZOOM repeatedly to return to  
01/01  
the original size.  
Off  
Bitrate 71  
Total Elapsed 0:01:32  
Resuming playback from the last  
stopped point  
2 Press 34to view the information and  
Resume playback of the last 5 discs is  
possible, even if the disc was ejected or  
the power switched off.  
press OK to access.  
3 Press 2or OK to select an option.  
4 Use the numeric keypad (0-9) to input  
the number/time or press 34to make  
the selection, then press OK to confirm.  
Playback will change to the chosen  
time or to the selected title/chapter/  
track.  
G Load one of the last 5 discs.  
LOAD” appears.  
G Press PLAY Band the disc will be played  
back from the last point.  
To cancel resume mode  
G In stop mode, press STOP 9again.  
TIPS: The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
21  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
21  
Disc Operations  
Special DVD Features  
SpecialVCD & SVCD Features  
Playback Control (PBC)  
Playing aTitle  
1 Press DISC MENU.  
The disc menu appears on theTV  
screen.  
ForVCD with Playback Control (PBC)  
feature (version 2.0 only)  
G Press DISC MENU to toggle between  
‘PBC ON’ and ‘PBC OFF’.  
2 Use 3 4 1 2 keys or numeric keypad  
(0-9) to select a play option.  
If you select ‘PBC ON’, the disc menu  
(if available) will appear on theTV.  
Use the S/ T or the numeric  
keypad (0-9) to select a play option.  
3 Press OK key to confirm.  
Camera Angle  
G Press ANGLE repeatedly to select  
G During playback, pressing RETURN/  
TITLE will return to the menu screen (if  
PBC is on).  
different desired angle.  
Changing the Audio Language  
For DVD  
If you want to skip the index menu  
and playback directly from the  
beginning,  
G Press AUDIO repeatedly to select  
different audio languages.  
G Press DISC MENU key on the remote  
control to switch to PBC off.  
Changing the Audio Channel  
ForVCD  
G Press AUDIO to select the available  
audio channels provided by the disc  
(MONO LEFT, MONO RIGHT, MIX-  
MONO, STEREO).  
Subtitles  
G Press SUBTITLE repeatedly to select  
different subtitle languages.  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
TIPS:  
22  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
22  
Disc Operations  
Preview Function (DVD/VCD)  
Playing a DivX disc  
The preview function allows you to  
reduce the picture of 6 tracks enough to  
display in a full screen.  
This DVD player supports the DivX  
movie playback that you download from  
your computer onto a CD-R/RW (see  
page 28 for more information).  
1 Press PREVIEW.  
The preview menu appears on theTV  
screen.  
1 Load a DivX disc.  
Playback will start automatically. If not  
press PLAY B.  
Select Digest Type:  
Title Digest  
Select Digest Type:  
Track Digest  
Chapter Digest  
Title Interval  
Disc Interval  
2 If the DivX movie contains external  
subtitles, the subtitle menu will appear on  
theTV screen for your selection.  
Track Interval  
Chapter Interval  
(Video CD example)  
(DVD example)  
G In this case, pressing SUBTITLE on the  
remote control will turn on or off the  
subtitle.  
2 Press 3 4 to select the PREVIEW type,  
then press OK.  
The picture of each segment will  
appear on the screen.  
G If multilingual subtitles are embedded on  
the DivX disc, pressing SUBTITLE will  
change the subtitle language during  
playback.  
A
D
B
E
C
F
Helpful Hints:  
Subtitle files with the following filename  
extensions (.srt, .smi, .sub, .ssa, .ass) are  
supported but do not appear on the file  
navigation menu.  
(example for 6 thumbnail pictures display)  
3 Press 3 4 1 2 to select a track and input  
your selected track number using the  
numeric keypad (0-9), then press OK.  
Playback will start automatically on the  
selected track.  
The subtitle filename have to be the  
same as the filename of the movie.  
G For CDDA (Musical CD)  
Press PREVIEW to listen to the first  
10 seconds of each sound track in the  
disc.  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
TIPS:  
23  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
23  
Disc Operations  
During playback, you can;  
Playing MP3/Windows Media™  
Audio/MPEG-4/JPEG/Kodak  
Picture CD  
G Press S / T to select another track/  
file in the current folder.  
G Press REPEAT continuously to access  
different ‘Play Mode’.  
IMPORTANT!  
You have to turn on yourTV and set to  
the correctVideo In channel. (See page  
15 “Setting up theTV”).  
FOLDER: files will be played back once.  
REPEAT ONE: one file being played  
repeatedly.  
REPEAT FOLDER: all files in one folder  
being played repeatedly.  
General Operation  
SHUFFLE: all files in the current folder  
being played at random order.  
SINGLE: play the selected file once,  
then return to the menu.  
1 Load a disc.  
The disc reading time may exceed 30  
seconds due to the complexity of the  
directory/file configuration.  
The data disc menu appears on theTV  
screen.  
G Press Åto pause playback.  
2 Playback will start automatically. If not  
Helpful Hints:  
press PLAY B.  
It may not be possible to play certain  
MP3/Windows MediaAudio/JPEG/DivX/  
MPEG-4 disc due to the configuration and  
characteristics of the disc or condition of the  
recording.  
01:42 04:40  
002/020  
\ Coco Lee \  
It is normal to experience an occasional  
--  
Before  
skipwhile listening to your MP3/Windows  
MediaAudio disc.  
MP3  
Coco  
Coco  
-
-
Before  
I love  
- - - - - -  
MP3  
ALBUM - - - - - -  
2002  
It is normal to experience an occasional  
MP3 Coco  
-
Jazz  
pixelation during MPEG-4/DivX playback  
due to poor clarity of digital contents during  
internet downloading.  
For multi-session discs with different  
Selecting a folder and track/file  
formats, only the first session will be available.  
1 Press 34to select the folder and press  
OK to open the folder.  
2 Press 34to select a track/file.  
3 Press S / T to go to previous/next  
page.  
4 Press OK to confirm.  
Playback will start from the selected  
file to the end of the folder.  
G To select another folder from the current  
disc, press 1to return to the root menu,  
then press 34to make your selection  
and press OK to confirm.  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
TIPS:  
24  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
24  
Disc Operations  
Zoom picture  
Special picture disc features  
1 During playback, press ZOOM repeatedly  
IMPORTANT!  
to display the picture with different scales.  
You have to turn on yourTV and set to  
the correctVideo In channel. (See page  
15 “Setting theTV”).  
2 Use 1234keys to view the zoomed  
picture.  
Playback with multi-angles  
G Load a Picture disc (Kodak Picture CD,  
JPEG).  
G During playback, press 3412 to rotate  
the picture on theTV screen.  
For Kodak disc, the slide show will  
begin.  
3: flip the picture vertically  
For JPEG disc, the picture menu  
appears on theTV screen. Press PLAY B  
to start the slide-show playback.  
4: flip the picture horizontally  
1: rotate the picture anti-clockwise  
2: rotate the picture clockwise  
Scan Effect  
Preview Function (JPEG)  
G Press ANGLE repeatedly to choose  
different scan effect.  
This function shows the content of the  
current folder or the whole disc.  
Various scan effect appears on the top  
left hand corner on theTV screen.  
1 Press PREVIEW during playback.  
12 thumbnail pictures will appear on  
theTV screen.  
Playing MP3/Windows Media™  
Audio music and JPEG picture  
simultaneously  
1 Load a disc that contains music and  
picture.  
The disc menu appears on theTV  
screen.  
2 Select an MP3/Windows Media™ Audio  
2 Press S / T to display the other  
track.  
pictures on the previous/next page.  
3 During MP3/Windows Media™ Audio  
music playback, select a picture from the  
TV screen and press PLAY B.  
3 Use 1234 to highlight one of the  
picture and press OK to start playback.  
The picture files will be played back  
4 Press DISC MENU to return to Picture  
one after another until end of the folder.  
CD menu.  
4 To quit simultaneous playback, press Ç.  
Helpful Hint:  
Some files on Kodak or JPEG disc may  
be distorted during playback due to the  
configuration and characteristics of the disc.  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
TIPS:  
25  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
25  
Karaoke Operations  
Playing Karaoke discs  
Vocal  
G You can fade out the original vocal from a  
IMPORTANT!  
karaoke disc.  
You have to turn on yourTV and set to  
the correctVideo In channel. (See page  
15 “Setting up theTV”).  
G Press VOCAL repeatedly to choose  
different audio modes.  
Helpful Hint:  
General Operation  
This function and on screen display  
depends on the availability of the disc.  
1 Connect a microphone (not supplied) to  
MIC on the front panel of the DVD player.  
Mode  
G Press MODE repeatedly to toggle  
between ‘Vol’,‘Echo’ or ‘Key’.  
1 When ‘Vol’ is selected, press 12to adjust  
the vocal value between 0 and 20.  
2 When ‘Echo’ is selected, press 12to  
adjust the echo value between 0 and 20.  
3 When ‘Key’ is selected, press 12to  
adjust the pitch value between -16 and 16.  
2 Press KARAOKE repeatedly.  
‘MIC ON/OFF’ appears on theTV  
screen.  
3 Load a karaoke disc and press PLAY B.  
4 Adjust the microphone volume using MIC  
LEVEL button on the side panel of the  
DVD player.  
Helpful Hint:  
Before connecting the microphone, set  
the microphone volume to the minimum level  
to prevent howling.  
Key setting  
G This function allows you to adjust the key  
tone level to match with your vocal.  
G Press KEY and use 12 to adjust the  
pitch to adopt your voice.  
26  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
26  
DVD Setup Menu Options  
This DVD Player setup is carried out via  
theTV, enabling you to customise the  
DVD Player to suit your particular  
requirements.  
Dimming players display panel  
You can select different levels of  
brightness for the display screen.  
1 In ‘GENERAL SETUP PAGE’, press 3 4 to  
highlight {DISPLAY DIM}, then press 2.  
General Setup menu  
100% Select this for full brightness.  
70% – Select this for medium brightness.  
40% – Select this for dimming the display.  
1 In disc mode, press SYSTEM MENU.  
2 Press 1 2 to select ‘General Setup’ icon.  
3 Press OK to confirm.  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
- - General Setup Page - -  
Programming disc tracks (not for  
Picture CD/MP3/Windows Media™  
Audio)  
Disc Lock  
Display Dim  
Program  
OSD Language  
Screen Saver  
Sleep  
You can play the contents of the disc in  
the order you want by programming the  
tracks to be played. Up to 20 tracks can  
be stored.  
DIVX(R) Vod Code  
Go to General Setup Page  
1 In ‘GENERAL SETUP PAGE’, press 3 4  
to highlight {PROGRAM}, then press 2  
to select {INPUT MENU}.  
Locking/Unlocking the disc for  
viewing  
Not all discs are rated or coded by the  
disc maker. You can prevent a specific disc  
from playing by locking the disc. Up to 40  
discs can be locked.  
2 Press OK to confirm.  
Programme : Track (01 - 17)  
1
2
3
4
5
04  
10  
11  
__  
__  
6
7
8
9
__  
__  
__  
__  
1 In ‘GENERAL SETUP PAGE’, press 3 4 to  
10 __  
highlight {DISC LOCK}, then press 2.  
Exit  
START  
NEXT  
LOCK  
Select this to block the playback of the  
current disc. Subsequent access to a  
locked disc requires six-digit password.  
The default password is ‘136 900’ (see  
page 36 “Changing the password”).  
To input your favourite tracks/chapter  
3 Use the numeric keypad (0-9) to enter  
a valid track/chapter number.  
4 Use 1234keys to move the cursor to  
the next position.  
UNLOCK  
Select this to unlock the disc and allow  
future playback.  
If the track number is more than ten,  
press T to open the next page and  
proceed with programming or,  
Use 1234keys to highlight {NEXT}  
on the programme menu, then press OK.  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
5 Repeat steps 3~4 to input another  
track/chapter number.  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
27  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
27  
DVD Setup Menu Options  
If you want to remove a track  
6 Use 1234keys to move the cursor to  
Sleep  
Sleep function allows you to turn off the  
DVD Player automatically after a preset  
time.  
the track you want to remove.  
7 Press OK to remove this track from the  
programme menu.  
1 In ‘GENERAL SETUP PAGE’, press 3 4 to  
highlight {SLEEP}, then press 2.  
To start programme playback  
8 Use 1234keys to highlight {START}  
on the programme menu, then press OK.  
Playback will start with the selected  
tracks under the programmed sequence.  
15 Mins  
Turn off the DVD Player after 15 minutes.  
30 Mins  
Turn off the DVD Player after 30 minutes.  
45 Mins  
To exit programme playback  
Turn off the DVD Player after 45 minutes.  
9 Use 1234keys to highlight {EXIT} on  
the programme menu, then press OK.  
60 Mins  
Turn off the DVD Player after 60 minutes.  
OSD Language  
OFF  
This menu contains various language  
options for display language on the screen.  
For details, see page 18.  
Turn off the sleep function.  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
Screen Saver - turning on/off  
DivX(R)VOD registration code  
The screen saver will help to prevent your  
TV display device from becoming  
damaged.  
Philips provide you the DivX® VOD  
(Video On Demand) registration code  
that allows you to rent and purchase  
videos using the DivX® VOD service.  
For more information, visit us at  
1 In ‘GENERAL SETUP PAGE’, press 3 4 to  
highlight {SCREEN SAVER}, then press 2.  
ON  
Select this if you wish to turn off theTV  
screen when disc playback is stopped or  
paused for more than 5 minutes.  
1 In ‘GENERAL SETUP PAGE’, press 3 4 to  
highlight {DIVX(R)VOD CODE}, then  
press 2.  
The registration code will appear.  
OFF  
Select this to disable the screen saver  
function.  
2 Press OK to exit.  
3 Use the registration code to purchase or  
rent the videos from DivX® VOD service  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
instructions and download the video onto  
a CD-R for playback on this DVD player.  
Helpful Hints:  
All the downloaded videos from DivX®  
VOD can only be played back on this DVD  
player.  
Time search feature is not available  
during DivX movie playback.  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
28  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
28  
DVD Setup Menu Options  
Digital Audio Setup  
Audio Setup Menu  
The options included in Digital Audio  
Setup are:‘Digital Output’ and ‘LPCM  
Output’.  
1 In disc mode, press SYSTEM MENU.  
2 Press 1 2 to select ‘Audio Setup’ icon.  
3 Press OK to confirm.  
1 In ‘AUDIO SETUP PAGE’, press 3 4 to  
highlight {DIGITAL AUDIO SETUP}, then  
press 2.  
- - Audio Setup Page - -  
2 Press the 3 4 keys to highlight an option.  
Analog Output  
Digital Audio Setup  
Sound Mode  
3 Enter its submenu by pressing 2.  
4 Press 3 4 to select a setting, then press  
Speaker Setup  
CD Upsampling  
Night Mode  
OK to confirm your selection.  
Digital Output  
Set the Digital output according to your  
optional audio equipment connection.  
Off:Turn off the digital output.  
All: If you have connected your  
DIGITAL AUDIO OUT to a multi-channel  
decoder/receiver.  
PCM Only: Only if your receiver is  
not capable of decoding multi-channel  
audio.  
Go to Audio Setup Page  
Analog Output  
Set Analog Output to match your DVD  
Player’s playback capability.  
1 In ‘AUDIO SETUP PAGE’, press 3 4 to  
highlight {ANALOG OUTPUT}, then  
press 2.  
Helpful Hints:  
Stereo  
If DIGITAL OUTPUT is set to All, all  
Select this option when output delivers  
sound from only the two front speakers.  
audio settings except MUTE are invalid.  
LPCM Output  
LT/RT  
Select this option if your DVD Player is  
connected to a Dolby Pro Logic decoder.  
If you connect the DVD Player to a PCM  
compatible receiver via the digital  
terminals, such as coaxial or optical etc,  
you may need to adjust ‘LPCM Output’.  
Discs are recorded at a certain sampling  
rate.The higher the sampling rate, the  
better the sound quality.  
V SURR  
Allows the DVD player to use virtual  
surround sound effects.  
Multi Channel  
Select this to enable Multi-channel output.  
48kHz: Playback a disc recorded at the  
sampling rate of 48kHz.  
96kHz: Playback a disc recorded at the  
sampling rate of 96kHz that can only be  
achieved in Stereo-Classic (Flat) mode.  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
Helpful Hint:  
LPCM Output can be selected only when  
PCM Only is activated.  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
29  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
29  
DVD Setup Menu Options  
Sound Mode  
CD Upsampling  
This feature allows you to convert your  
music CD to a higher sampling rate using  
sophisticated digital signal processing for  
better sound quality. If you have activated  
the upsampling, the player will  
The options included in Sound Mode  
Setup are: ‘3D’,‘Movie Mode’ and ‘Music  
Mode’.  
1 In ‘AUDIO SETUP PAGE’, press 3 4 to  
highlight {SOUND MODE}, then press 2.  
automatically switch to stereo mode.  
2 Press the 3 4 keys to highlight an option.  
1 InAUDIO SETUP PAGE’, press 3 4 to  
3 Enter its submenu by pressing 2.  
highlight {CD UPSAMPLING}, then press 2.  
4 Press 3 4 to select a setting, then press  
OFF  
OK to confirm your selection.  
Select this to disable CD-upsampling.  
3D  
88.2 kHz (X2)  
Select this to convert the sampling rate of  
the CDs twice higher than the original.  
This function provides a virtual surround  
sound experience using just two speakers.  
Off, Living Room, Hall,Arena and  
Church  
176.4 kHz (X4)  
Select this to convert the sampling rate of  
the CDs four times higher than the  
original.  
Movie Mode  
Select a Sound Mode that matches the  
type of music you are playing.These  
preset Sound Modes adjust the frequency  
bands of the video to enhance your  
favourite movie sound track.  
Off, Sci-Fic,Action, Drama and  
Concert  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
Helpful Hint:  
CD upsampling feature is only applicable  
to stereo output setting.  
Music Mode  
Select a Sound Mode that matches the  
type of music you are playing.These  
preset Sound Modes adjust the frequency  
bands of the audio to enhance your  
favourite music.  
Off, Digital, Rock, Classic and Jazz  
Speaker Setup  
This menu contains setup options for  
your audio output which makes the  
speaker setup system reproduce high  
quality surround sound. For details, see  
page 37.  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
30  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
30  
DVD Setup Menu Options  
Video Setup Menu  
Night Mode - turning on/off  
In this mode, the high volume outputs are  
softened and low volume outputs are  
brought upward to an audible level. It is  
useful for watching your favourite action  
movie without disturbing others at night.  
1 In disc mode, press SYSTEM MENU.  
2 Press 1 2 to select ‘Video Setup’ icon.  
3 Press OK to confirm.  
1 In ‘AUDIO SETUP PAGE’, press 3 4 to  
highlight {NIGHT MODE}, then press 2.  
- - Video Setup Page - -  
TV Type  
ON  
TV Display  
Progressive  
Picture Setting  
Select this to level out the volume. This  
feature is only available for movies with  
Dolby Digital mode.  
OFF  
Select this when you want to enjoy the  
surround sound with its full dynamic  
range.  
Go To Video Setup Page  
TVType  
2 Press 3 4 to select a setting, then press  
This menu contains the options for  
selecting the colour system that matches  
the connectedTV. For details, see page  
17.  
OK to confirm your selection.  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
31  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
31  
DVD Setup Menu Options  
Progressive - turning on/off  
Setting theTV Display  
Set the aspect ratio of the DVD Player  
according to theTV you have connected.  
The format you select must be available  
on the disc. If it is not, the setting forTV  
display will not affect the picture during  
playback.  
In the progressive scan mode, you can  
enjoy the high quality picture with less  
flickers. It only works when you have  
connected the DVD player’sY Pb Pr jacks  
to yourTV that supports the progressive  
video input. Otherwise, the a distorted  
picture will appear on theTV. For proper  
progressive scan set up, see page 16.  
1 In ‘VIDEO SETUP PAGE’, press 3 4 to  
highlight {TV DISPLAY}, then press 2.  
1 In ‘VIDEO SETUP PAGE’, press 3 4 to  
2 Press 3 4 to highlight one of the options  
highlight {PROGRESSIVE}, then press 2.  
below:  
OFF  
4:3 PAN SCAN –  
To disable Progressive Scan function.  
Select this if you have  
a normalTV and want  
both sides of the  
ON  
To enable Progressive Scan function.  
picture to be trimmed or formatted to fit  
yourTV screen.  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
4:3 LETTER BOX –  
Select this if you have a  
normalTV. In this case, a  
wide picture with black  
bands on the upper and lower portions of  
theTV screen will  
Follow the instructions shown on the  
TV to confirm the selection (if any).  
If a distorted screen appears on theTV  
picture, wait for 15 seconds for auto  
recovery.  
be displayed.  
16:9 – Select this if  
you have a wide-  
screenTV.  
3 Select an item and press OK.  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
32  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
32  
DVD Setup Menu Options  
4 Press 3 4 to highlight one of the  
Picture Setting  
following options.  
This DVD Player provides three  
predefined sets of picture colour settings  
and one personal setting which you can  
define yourself.  
BRIGHTNESS  
Increase the value will brighten the  
picture or vice versa. Choose zero (0) for  
average setting.  
1 In ‘VIDEO SETUP PAGE’, press 3 4 to  
CONTRAST  
highlight {PICTURE SETTING}, then press  
2.  
Increase the value will sharpen the picture  
or vice versa. Choose zero (0) to balance  
the contrast.  
STANDARD  
Select this for standard picture setting.  
TINT  
BRIGHT  
Select this will make theTV picture  
brighter.  
Increase the value will darken the picture  
or vice versa. Choose zero (0) for  
average setting.  
SOFT  
COLOUR  
Select this will make theTV picture softer.  
Increase the value will enhance the colour  
in your picture or vice versa. Choose zero  
(0) to balance the colour.  
PERSONAL  
Select this to personalise your picture  
colour by adjusting the brightness,  
contrast, tint and colour (saturation).  
5 Press 1 2 to adjust the setting that best  
suit your personal preference.  
2 Press 3 4 to select a setting, then press  
6 Repeat steps 4~5 for adjusting other  
OK to confirm your selection.  
colour features.  
3 If you select {PERSONAL}, then proceed  
to steps 4~7.  
7 Press OK to confirm.  
The ‘PERSONAL PICTURE SETUP’  
menu appears.  
Personal Picture Setup  
Brightness  
Contrast  
Tint  
0
0
0
0
Color  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
33  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
33  
DVD Setup Menu Options  
Preference Page  
Restricting playback by Parental  
Control  
1 Press Ç twice to stop playback (if any),  
Some DVDs may have a parental level  
assigned to the complete disc or to  
certain scenes on the disc. This feature  
lets you set a playback limitation level.  
The rating levels are from 1 to 8 and are  
country dependent. You can prohibit the  
playing of certain discs that are not  
suitable for your children or have certain  
discs played with alternative scenes.  
then press SYSTEM MENU.  
2 Press 1 2 to select thePreference Setup’  
icon.  
3 Press OK to confirm.  
- - Preference Page - -  
Audio  
Subtitle  
1 In ‘PREFERENCE PAGE’, press 3 4 to  
Disc Menu  
Parental  
PBC  
highlight {PARENTAL}, then press 2.  
MP3/JPEG Nav  
Password  
- - Preference Page - -  
Set To Preference Page  
Audio  
1 KID SAFE  
2 G  
Subtitle  
Disc Menu  
Parental  
PBC  
3 PG  
4 PG 13  
5 PGR  
6 R  
Audio, Subtitle, Disc Menu  
MP3/JPEG Nav  
Password  
These menus contain various language  
options for audio, subtitle and disc menu  
which may be recorded on the DVD. For  
details, see page 18.  
7 NC17  
Set KID SAFE  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
34  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
34  
DVD Setup Menu Options  
2 Press 3 4 to highlight a rating level for  
the disc inserted and press OK.  
PBC  
You can set the PBC to ON or OFF. This  
feature is available only onVideo CD 2.0  
with playback control (PBC) feature. For  
details, see page 22.  
To disable Parental controls and have  
all Discs play, select {8 ADULT}.  
3 Use the numeric keypad (0-9) to enter  
the six-digit password (see page 36  
“Changing the password”).  
MP3/JPEG Menu - turning on/off  
DVDs that are rated above the level  
you selected will not play unless you  
enter your six-digit password.  
MP3/JPEG Navigator can be set only if the  
disc is recorded with menu. It allows you  
to select different display menus for easy  
navigation.  
Helpful Hints:  
VCD, SVCD, CD have no level indication,  
so parental control function has no effect on  
these type of discs.This applies to most  
illegal DVD discs.  
1 In ‘PREFERENCE PAGE’, press 3 4 to  
highlight {MP3/JPEG NAV}, then press 2.  
WITHOUT MENU  
Select this to display all the files contained  
in the MP3/Picture CD.  
Some DVDs are not encoded with a  
rating though the movie rating may be  
printed on the Disc cover. The rating level  
feature does not work for such Discs.  
WITH MENU  
Select this to display only the folder menu  
of the MP3/Picture CD.  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
To return to the previous menu, press 1.  
To remove the menu, press SYSTEM MENU.  
TIPS:  
35  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
35  
DVD Setup Menu Options  
Changing the Password  
Setting the DivX Subtitle font  
The same password is used for both  
Parental Control and Disc Lock. Enter  
your six-digit password when prompted  
on the screen. The default password is  
136 900.  
You can set the font type that supports  
the recorded DivX subtitle.  
1 In ‘PREFERENCE PAGE’, press 3 4 to  
highlight {DivX SUBTITLE}, then press 2.  
STANDARD  
A standard list of English subtitle fonts  
provided by this DVD Player.  
1 In ‘PREFERENCE PAGE’, press 3 4 to  
highlight {PASSWORD}, then press 2 to  
select {CHANGE}.  
CYRILLIC  
Select this to display a cyrillic subtitle fonts.  
2 Press 3 4 to select a setting, then press  
Old Password  
New Password  
Confirm PWD  
OK to confirm your selection.  
Restoring to original settings  
OK  
Setting the DEFAULT function will reset  
all options and your personal settings to  
the factory defaults, except your  
password for Parental Control and Disc  
Lock.  
2 Use the numeric keypad (0-9) to enter  
your old six-digit password.  
When doing this for the first time, key  
in ‘136 900’.  
If you forget your old six-digit  
password, key in ‘136 900’.  
1 In ‘PREFERENCE PAGE’, press 34 to  
highlight {DEFAULT}, then press 2 to  
select {RESET}.  
2 Press OK to confirm.  
All settings will now reset to factory  
defaults.  
3 Enter the new six-digit password.  
4 Enter the new six-digit password a second  
time to confirm.  
The new six-digit password will now  
take effect.  
5 Press OK to confirm.  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
36  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
36  
Sound andVolume Controls  
{SUBWOOFER}  
ON – when a subwoofer is connected.  
OFF – when no subwoofer is connected.  
Setting the speakerschannels  
You can adjust the delay times (centre  
and surround only) and volume level for  
individual speakers. These adjustments let  
you optimise the sound according to your  
surroundings and setup.  
{SPEAKERVOLUME} Volume level  
setting for individual speakers (-6dB ~  
+6dB).  
IMPORTANT!  
The speaker settings only available on  
Multi-channel audio outputs.  
- - Speakers Volume Setup - -  
Front Left  
Front Right  
Center  
0dB0  
0dB0  
0dB0  
0dB0  
0dB0  
0dB0  
1 Press STOP then, press SYSTEM  
MENU.  
Subwoofer  
Rear Right  
Rear Left  
2 Press 2repeatedly to select {AUDIO  
SETUP PAGE}.  
3 Press 34 to highlight {SPEAKER SETUP},  
{SPEAKER DELAY} – Delay times setting  
in relation to the listening position/  
distance for centre and surround  
speakers (1m ~ 10m).  
then press 2.  
- - Audio Setup Page - -  
Analog Output  
Digital Audio Setup  
Sound Mode  
Speaker Setup  
CD Upsampling  
Night Mode  
- - Speakers Distance Setup - -  
Center  
1.0M  
1.0M  
- - Speaker Setup Page - -  
Subwoofer  
Front Speakers  
Center Speaker  
Rear Speakers  
Subwoofer  
Large  
Small  
Rear Right  
Rear Left  
1.0M  
1.0M  
Speakers Volume  
Speakers Delay  
4 Enter its submenu by pressing 2.  
6 Press 1 2 to adjust the setting that best  
suit your surround sound needs.  
5 Press 34 to highlight one of the options  
below at a time, then press 2.  
7 Press OK to confirm.  
{FRONT SPEAKERS, CENTER SPEAKER,  
REAR SPEAKERS}  
OFF – when no speaker is connected.  
LARGE – when connected speakers can  
produce low frequency signals below  
120Hz.  
SMALL – when connected speakers  
cannot produce low frequency signals  
below 120Hz.  
Helpful Hints:  
Use the longer delay time settings when  
the rear speakers are closer to the listener  
than the front speakers.  
The test tone will be automatically  
generated to help you judge the sound level  
of each speaker.  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
37  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
37  
Troubleshooting  
WARNING  
Under no circumstances should you try to repair the system yourself, as this will  
invalidate the warranty. Do not open the system as there is a risk of electric shock.  
If a fault occurs, first check the points listed below before taking the system for repair. If  
you are unable to remedy a problem by following these hints, consult your dealer or  
Philips for help.  
Problem  
Solution  
No power  
– Check if the AC power cord is properly connected.  
– Press the STANDBY ON on the front of the DVD  
system to turn on the power.  
No picture  
– Refer to yourTV’s manual for correctVideo In  
channel selection. Change theTV channel until you  
see the DVD screen.  
– Check if theTV is switched on.  
– If the progressive scan feature is activated but the  
connectedTV does not support progressive signals  
or the cables are not connected accordingly, see  
page 16 for proper progressive scan set up or  
deactivate the progressive scan feature as below:  
1) Turn off yourTV progressive scan mode or turn on  
to interlaced mode.  
2) Press and hold EJECT on the DVD Player.  
3) When the disc is ejected, press and hold EJECT again,  
and numeric keypad ‘1’ on the remote control at the  
same time for few seconds.  
Distorted picture  
– Sometimes a small amount of picture distortion may  
appear depending on the disc being played back.This  
is not a malfunction.  
Completely distorted picture or  
black/white picture with DVD  
– Connect DVD Player directly to theTV.  
– Make sure the disc is compatible with the DVD/  
Player.  
– Ensure that the DVD Player’sTVType is set to match  
that of the Disc and yourTV.  
No sound or distorted sound  
No audio at digital output  
– Adjust the volume.  
– Check that the speakers are connected correctly.  
– Check the digital connections.  
– Check if your receiver can decode MPEG-2 or DTS  
and if not, please make sure the digital output is set  
to PCM.  
– Check if the audio format of the selected audio  
language matches your receiver capabilities.  
38  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
38  
Troubleshooting  
Problem  
Solution  
Disc cant be played  
– The DVD+R/CD-R must be finalised.  
– Ensure the disc label is facing up.  
– Check if the disc is defective by trying another disc.  
– If you have recorded a Picture CD or MP3/Windows  
Media™ Audio CD yourself, ensure that your disc  
contains at least 10 pictures or 5 MP3/Windows  
Media™ Audio tracks.  
– Region code incorrect.  
Picture freezes momentarily  
during playback  
– Check the disc for fingerprints/scratches and  
clean with a soft cloth wiping from centre to edge.  
No return to start-up screen when  
disc is removed  
– Reset the unit by switching the player off, then on  
again.  
The player does not respond to  
the Remote Control  
– Aim the Remote Control directly at the sensor  
on the front of the player.  
– Reduce the distance to the player.  
– Replace the batteries in the Remote Control.  
– Re-insert the batteries with their polarities (+/–  
signs) as indicated.  
Buttons do not work  
To completely reset the player, unplug the AC  
cord from the AC outlet for 5-10 seconds.  
Player does not respond to some  
operating commands during playback.  
– Operations may not be permitted by the disc.  
Refer to the instructions of the disc jacket.  
DVD Player cannot read  
CDs/DVDs  
– Use a commonly available cleaning CD/DVD to  
clean the lens before sending the DVD Player for  
repair.  
Menu items cannot be selected  
Unable to play DivX movies  
– Press STOP twice before selecting System Menu.  
– Depending on the disc availability, some menu items  
cannot be selected.  
– Check that the DivX file is encoded in ‘Home  
Theater’ mode with DivX 5.x encoder.  
Unable to select Progressive Scan on/off – Check that the output of the video signal is switch to  
‘YUV’.  
No sound during DivX movies playback – The audio codec may not be supported by the DVD  
player.  
An MPEG-4 or DivX movies does  
not repeat  
– Check that file size of the movies does not exceed  
the file size of the CD disc during burning.  
39  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
39  
Specifications  
AUDIO PERFORMANCE  
TV STANDARD (PAL/50Hz) (NTSC/60Hz)  
DA Converter  
DVD  
24 bit, 192 kHz  
Number of lines  
Playback  
625  
525  
fs 96 kHz  
fs 48 kHz  
fs 48 kHz  
fs 44.1kHz  
fs 44.1kHz  
4Hz- 44kHz  
4Hz- 22kHz  
4Hz- 22kHz  
4Hz- 20kHz  
4Hz- 20kHz  
> 100 dB  
> 90 dB  
> 100 dB  
> 85 dB  
Multistandard (PAL/NTSC)  
SVCD  
VIDEO PERFORMANCE  
Video DAC  
YPbPr  
Video Output  
12 bit, 108mHz  
0.7Vpp — 75 ohm  
1Vpp — 75 ohm  
CD/VCD  
Signal-Noise (1kHz)  
Dynamic range(1kHz)  
Crosstalk (1kHz)  
VIDEO FORMAT  
Digital Compression MPEG 2 for DVD,SVCD  
Distortion/noise (1kHz)  
MPEG MP3  
MPEG Audio L3  
MPEG 1 forVCD  
MPEG-4  
DivX  
CONNECTIONS  
YPbPr Output  
Cinch 3x  
DVD  
50Hz  
60Hz  
Video Output  
Cinch (yellow)  
Horiz. resolution  
Vertical resolution  
720 pixels  
576 lines  
720 pixels  
480 lines  
Audio Output(L+R) Cinch (white/red)  
Digital Output  
1 coaxial  
VCD  
50Hz  
60Hz  
IEC60958 for CDDA / LPCM  
IEC61937 for MPEG 1/2,  
Dolby Digital  
Horiz. resolution  
Vertical resolution  
352 pixels  
288 lines  
352 pixels  
240 lines  
6 channel analogue output  
AUDIO FORMAT  
Audio Front L/R  
Audio Rear L/R  
Audio Centre  
Cinch (white/red)  
Cinch (white/red)  
Cinch (blue)  
Digital  
MPEG/ AC-3/ compressed Digital  
PCM  
16, 20, 24 bits  
Audio Subwoofer  
Cinch (black)  
fs, 44.1, 48, 96 kHz  
MP3(ISO 9660) 96, 112, 128, 256  
kbps & variable  
CABINET  
Dimensions (w x h x d)  
Weight  
bit rate fs, 32, 44.1,  
48 kHz  
435 x 37 x 265 mm  
Approximately 2.0 kg  
Analog Sound Stereo  
Dolby Surround compatible downmix from Dolby Digital  
multi-channel sound  
Dolby Pro Logic II  
POWER CONSUMPTION  
Power Supply Rating  
110 – 240V;  
50/60 Hz  
< 10W  
3D sound for virtual 5.1 channel sound on 2 speakers  
Power consumption  
Power consumption in Standby mode < 0.8W  
Specifications subject to change without prior notice  
40  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
40  
Glossary  
Analog: Sound that has not been turned into  
numbers. Analog sound varies, while digital sound has  
specific numerical values. These jacks send audio  
through two channels, the left and right.  
Aspect ratio: The ratio of vertical and horizontal  
sizes of a displayed image.The horizontal vs. vertical  
ratio of conventionalTVs. is 4:3, and that of wide-  
screens is 16:9.  
AUDIO OUT Jacks: Jacks on the back of the DVD  
System that send audio to another system (TV, Stereo,  
etc.).  
Bit Rate: The amount of data used to hold a given  
length of music; measured in kilobits per seconds, or  
kbps. Or, the speed at which you record. Generally,  
the higher the bit rate, or the higher the recording  
speed, the better the sound quality. However, higher  
bit rates use more space on a Disc.  
Chapter: Sections of a picture or a music piece on a  
DVD that are smaller than titles. A title is composed  
of several chapters. Each chapter is assigned a chapter  
number enabling you to locate the chapter you want.  
ComponentVideo Out Jacks: Jacks on the back of  
the DVD System that send high-quality video to aTV  
that has ComponentVideo In jacks (R/G/B, Y/Pb/Pr,  
etc.).  
MP3: A file format with a sound data compression  
system.MP3is the abbreviation of Motion Picture  
Experts Group 1 (or MPEG-1) Audio Layer 3. By using  
MP3 format. one CD-R or CD-RW can contain about  
10 times as much data volume as a regular CD can.  
Multichannel: DVD is specified to have each sound  
track constitute one sound field. Multichannel refers  
to a structure of sound tracks having three or more  
channels.  
Parental Control: A function of the DVD to limit  
playback of the disc by the age of the users according  
to the limitation level in each country. The limitation  
varies from disc to disc; when it is activated, playback  
will be prohibited if the softwares level is higher than  
the user-set level.  
PCM (Pulse Code Modulation): A system for  
converting analog sound signal to digital signal for  
later processing, with no data compression used in  
conversion.  
Playback control (PBC): Refers to the signal  
recorded on video CDs or SVCDs for controlling  
reproduction. By using menu screens recorded on a  
Video CD or SVCD that supports PBC, you can enjoy  
interactive-type software as well as software having a  
search function.  
Disc menu: A screen display prepared for allowing  
selection of images, sounds, subtitles, multi-angles, etc  
recorded on a DVD.  
Digital: Sound that has been converted into  
numerical values. Digital sound is available when you  
use the DIGITAL AUDIO OUT COAXIAL or  
OPTICAL jacks.These jacks send audio through  
multiple channels, instead of just two channels as  
analog does.  
DivX 3.11/4.x/5.x: The DivX codec is a patent-  
pending, MPEG-4 based video compression  
technology, developed by DivXNetworks, Inc., that can  
shrink digital video to sizes small enough to be  
transported over the internet, while maintaining high  
Progressive Scan: It displays all the horizontal lines  
of a picture at one time, as a signal frame. This system  
can convert the interlaced video from DVD into  
progressive format for connection to a progressive  
display. It dramatically increases the vertical  
resolution.  
Region code: A system for allowing discs to be  
played back only in the region designated beforehand.  
This unit will only play discs that have compatible  
region codes. You can find the region code of your  
unit by looking on the product label. Some discs are  
compatible with more than one region (or ALL  
regions).  
Surround: A system for creating realistic three-  
dimensional sound fields full of realism by arranging  
multiple speakers around the listener.  
Title: The longest section of a picture or music  
feature on DVD, music, etc., in video software, or the  
entire album in audio software. Each title is assigned a  
title number enabling you to locate the title you want.  
VIDEO OUT jack: Jack on the back of the DVD  
System that sends video to aTV.  
visual quality.  
Dolby Digital: A surround sound system developed  
by Dolby Laboratories containing up to six channels  
of digital audio (front left and right, surround left and  
right, center and subwoofer).  
DTS: DigitalTheatre Systems. This is a surround  
sound system, but it is different from Dolby Digital.  
The formats were developed by different companies.  
JPEG: A very common digital still picture format.A  
still-picture data compression system proposed by the  
Joint Photographic Expert Group, which features small  
decrease in image quality in spite of its high  
compression ratio.  
41  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
41  
Meet Philips at the Internet  
DVP 5106K  
CLASS 1  
LASER PRODUCT  
sgpSL-0524/97-1  
42  
13/06/05, 11:06DAMVP5106K/93_1  
01-42 DVP5106K_971  
42  

IBM NETVISTA 6826 User Manual
Intel Cherryville 520 Series Mlc Solid State Drive SSDSC2CW480A3K5 User Manual
KitchenAid KEBS277B User Manual
KitchenAid KECC568RPS01 User Manual
Kuppersbusch USA KGCT 907 2E User Manual
LG Electronics MU 50PZ44VS User Manual
Maytag MEC7430W User Manual
Miele KM 3474 User Manual
Philips 15GR2730 User Manual
Philips CD360 User Manual