Register your product and get support at
DVP4320
ZH-CN Ⴌ
߀ ൱Ҭꢀ 3
EN User manual
19
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot be
disposed with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries because correct
disposal helps to prevent negative consequences for
the environmental and human health.
1 Important
Safety and important notice
Warning
‡ Risk of overheating! Never install the product in a
FRQÀQHGꢀVSDFHꢂꢀ$OZD\VꢀOHDYHꢀDꢀVSDFHꢀRIꢀDWꢀOHDVWꢀꢃꢀLQFKHVꢀ
around the product for ventilation. Ensure curtains or
other objects never cover the ventilation slots on the
product.
‡ Never place the product, remote control or batteries
QHDUꢀQDNHGꢀÁDPHVꢀRUꢀRWKHUꢀKHDWꢀVRXUFHVꢁꢀLQFOXGLQJꢀGLUHFWꢀ
sunlight.
Copyright notice
This product
incorporates copyright
protection technology
that is protected by method claims of certain U.S.
patents and other intellectual property rights
owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorised by Macrovision
Corporation, and is intended for home and
other limited viewing uses only unless otherwise
authorised by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
‡ Only use this product indoors. Keep this product away
IURPꢀZDWHUꢁꢀPRLVWXUHꢀDQGꢀOLTXLGꢄÀOOHGꢀREMHFWVꢂ
‡ Never place this product on other electrical equipment.
‡ Keep away from this product during lightning storms.
‡ Where the mains plug or an appliance coupler is used as
the disconnect device, the disconnect device shall remain
readily operable.
‡ Visible and invisible laser radiation when open. Avoid
exposure to beam.
About Progressive Scan
Trademark notice
&RQVXPHUVꢀVKRXOGꢀQRWHꢀWKDWꢀQRWꢀDOOꢀKLJKꢀGHÀQLWLRQꢀ
television sets are fully compatible with this product
and may cause artifacts to be displayed in the
picture. In case of 525 or 625 progressive scan
picture problems, it is recommended that the user
VZLWFKꢀWKHꢀFRQQHFWLRQꢀWRꢀWKHꢀ¶VWDQGDUGꢀGHÀQLWLRQ·ꢀ
output. If there are questions regarding our TV set
compatibility with this model 525p and 625p DVD
player, please contact our customer service center.
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks
of Dolby Laboratories.
Windows Media and the Windows
logo are trademarks, or registered
trademarks of Microsoft
Corporation in the United States
and/or other countries.
Disposal of your old product and
batteries
DivX, DivX Ultra
&HUWLÀHGꢁꢀDQGꢀ
associated logos are
trademarks of DivX,
Inc. and are used under license.
Your product is designed and
manufactured with high quality materials
and components, which can be recycled
and reused.
®
2IÀFLDOꢀ'LY; ꢀ8OWUDꢀ&HUWLÀHGꢀSURGXFWꢂ
Plays all versions of DivX ® video (including DivX ®
6) with enhanced playback of DivX®ꢀPHGLDꢀÀOHVꢀDQGꢀ
the DivX® Media Format.
When this crossed-out wheeled bin
symbol is attached to a product it
means that the product is covered
by the European Directive 2002/96/
EC. Please inform yourself about the
local separate collection system for
electrical and electronic products.
Please act according to your local rules and do not
dispose of your old products with your normal
household waste.
Plays DivX® video with menus, subtitles and audio
tracks.
The USB-IF Logos are trademarks
of Universal Serial Bus
Implementers Forum, Inc.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
CLASS 1
LASER PRODUCT
20 EN
b
2 Your product
‡ꢀ Turn on this product or switch to
standby mode.
Congratulations on your purchase, and welcome to
3KLOLSVꢅꢀ7RꢀIXOO\ꢀEHQHÀWꢀIURPꢀWKHꢀVXSSRUWꢀWKDWꢀ3KLOLSVꢀ
welcome.
c IR sensor
‡ꢀ Point the remote control at the IR sensor.
jack
d
e
f
‡ꢀ &RQQHFWꢀDꢀ86%ꢀÁDVKꢀGULYHꢂꢀ
Feature highlights
Philips EasyLink
Your product supports Philips EasyLink, which uses
the HDMI CEC (Consumer Electronics Control)
protocol. EasyLink-compliant devices that are
connected through HDMI connectors can be
controlled by a single remote control.
‡ꢀ Stop play.
‡ꢀ Start, pause or resume disc play.
Remote control
Note
‡ Philips does not guarantee 100% interoperability with all
HDMI CEC devices.
Screen Fit
View the movie in full screen display on any TV.
Progressive scan video
Push the limits of standard resolution and provide a
PRUHꢀÀOPꢄOLNHꢀ'9'ꢀYLGHRꢀGLVSOD\ꢀRQꢀDꢀ79ꢀVFUHHQꢂ
Hi-speed USB link
3OXJꢀDꢀ86%ꢀÁDVKꢀGULYHꢀWRꢀWKHꢀ86%ꢀMDFNꢀWRꢀHQMR\ꢀWKHꢀ
03ꢆꢇ:0$ꢇ-3(*ꢇ'LY;ꢀÀOHVꢂ
Region codes
You can play discs with the following region codes.
DVD region code
Countries
China
Product overview
Main unit
a PUSH TO OPEN
‡ꢀ Open the disc compartment.
EN 21
a
b
3 Connect
Make the following connections to use this product.
‡ꢀ Turn on this product or switch to
standby mode.
Basic connections:
‡ꢀ Video
‡ꢀ Audio
‡ꢀ Switch to the USB mode.
c DISC MENU
‡ꢀ Access or exit the disc menu.
Optional connections:
‡ꢀ Switch to the disc mode.
‡ꢀ For VCD and SVCD, turn on or off PBC
(playback control).
‡ꢀ Route audio to other devices:
‡ꢀ 'LJLWDOꢀDPSOLÀHUꢇUHFHLYHU
‡ꢀ Analog stereo system
‡ꢀ 86%ꢀÁDVKꢀGULYH
d
‡ꢀ Navigate the menus.
‡ꢀ Search fast-forward ( ) or fast-backward
( ).
Note
‡ꢀ Search slow-forward ( ) or slow-
backward ( ).
‡ Refer to the type plate at the back or bottom of the
SURGXFWꢀIRUꢀLGHQWLÀFDWLRQꢀDQGꢀVXSSO\ꢀUDWLQJVꢂ
‡ Before you make or change any connections, ensure that
e
f
g
BACK
‡ꢀ Return to the previous display menu.
all the devices are disconnected from the power outlet.
‡ꢀ Start, pause or resume disc play.
Tip
/
‡ Different types of connectors may be used to connect
this product to your TV, depending on availability and
your needs. A comprehensive interactive guide to
help you connect your product is available at www.
connectivityguide.philips.com.
‡ꢀ Skip to the previous or next title, chapter,
or track.
h
‡ꢀ Mute volume.
i Numeric buttons
‡ꢀ Select an item to play.
Connect video cables
j SUBTITLE
Connect this product to TV to view disc play. Select
the best video connection that TV can support.
Option 1: Connect to the HDMI jack (for a HDMI,
DVI or HDCP-compliant TV).
Option 2: Connect to the component video jacks
(for a standard TV or Progressive Scan TV).
Option 3: Connect to the AV out jack (for a
standard TV).
‡ꢀ Select a subtitle language on a disc.
ZOOM
k
‡ꢀ Fit the picture format to the TV screen.
‡ꢀ Zoom the picture in or out.
l REPEAT
‡ꢀ Select various repeat play modes.
m REPEAT A-B
‡ꢀ 5HSHDWꢀSOD\ꢀIRUꢀDꢀVSHFLÀFꢀVHFWLRQꢂ
n AUDIO
Note
‡ꢀ Select an audio language or channel on
‡ You must connect this product directly to a TV.
a disc.
o
p
‡ꢀ Stop play.
INFO
‡ꢀ For discs, access the play options or
display the current disc status.
‡ꢀ For slideshow, display a thumbnail view of
SKRWRꢀÀOHVꢂ
q OK
‡ꢀ &RQÀUPꢀDQꢀHQWU\ꢀRUꢀVHOHFWLRQꢂ
r SETUP
‡ꢀ Access or exit the setup menu.
22 EN
Option 1: Connect to the HDMI jack
Option 3: Connect to the AV OUT jack
1 Connect the supplied AV cables to:
‡ꢀ the AV OUT jack (3.5mm) on this
product.
‡ꢀ the video input jack on the TV.
HDMI IN
VIDEOIN
1 Connect an HDMI cable (not supplied) to
‡ꢀ the HDMI OUT jack on this product.
‡ꢀ the HDMI input jack on the TV.
Tip
Note
‡ The video input jack on the TV may be labeled as A/V
IN, VIDEO IN, COMPOSITE or BASEBAND.
‡ This type of connection provides standard picture
quality.
‡ If the device supports HDMI CEC, you can control
compliant devices with a single remote control (see “Get
started” > “Use Philips EasyLink”).
Connect audio cables
Connect the audio from this product to the TV to
allow sound output through the TV.
Tip
‡ This type of connection provides best picture quality.
AUDIO IN
Option 2: Connect to the component
video jack
Pr
COMPONENT
Y
Pb
VIDOEIN
1 Connect the supplied AV cables to:
‡ꢀ the AV OUT jack (3.5mm) on this
product.
‡ꢀ the audio input jacks on the TV.
1 Connect the component video cables (not
supplied) to:
Route audio to other devices
Route the audio from this product to other devices
to enhance audio play.
‡ꢀ the Y Pb Pr jacks on this product.
‡ꢀ the COMPONENT VIDEO input jacks
on the TV.
Tip
‡ The component video input jack on the TV might be
labeled as Y Pb/Cb Pr/Cr or YUV.
‡ This type of connection provides good picture quality.
EN 23
&RQQHFWꢀWRꢀGLJLWDOꢀDPSOLÀHUꢁUHFHLYHU
Connect power
DIGTIA L IN
Caution
‡ Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
of the unit.
‡ Before connecting the AC power cord, ensure you have
completed all other connections.
Note
1 Connect a coaxial cable (not supplied) to:
‡ꢀ the COAXIAL jack on this product.
‡ꢀ the COAXIAL/DIGITAL input jack on
the device.
‡ The type plate is located on the bottom of the product.
1 Connect the AC power cable:
‡ꢀ to this product.
Connect analogue stereo system
‡ꢀ to the wall outlet.
AUDIO IN
4 Get started
Prepare the remote control
1 Connect the supplied AV cables to:
‡ꢀ the AV OUT jack (3.5mm) on this
product.
‡ꢀ the audio input jacks on the device.
1 Open the battery compartment.
2 Insert 2 AAA batteries with correct polarity
(+/-) as indicated.
&RQQHFWꢀ86%ꢀÁDVKꢀGULYH
1ꢀ &RQQHFWꢀDꢀ86%ꢀÁDVKꢀGULYHꢀWRꢀWKHꢀ
this product.
jack on
3 Close the battery compartment.
Caution
Note
‡ Remove batteries if they are exhausted or if the remote
control is not to be used for a long time.
‡ Do not mix batteries (old and new or carbon and
alkaline, etc.).
‡ This product can only play/view MP3, WMA, DivX or
-3(*ꢀÀOHVꢀWKDWꢀDUHꢀVWRUHGꢀRQꢀDꢀ86%ꢀÁDVKꢀGULYHꢂ
‡ Press the
button to access the content and play
WKHꢀÀOHVꢂ
‡ Batteries contain chemical substances, so they should be
disposed of properly.
Find the correct viewing channel
1 Press to turn on this product.
2 Turn on the TV and switch to the correct
video-in channel. (Refer to the TV user manual
on how to select the correct channel.)
24 EN
3 Press to select [Video Setup].
4 Select [Progressive] > [On], then press OK.
Select menu display language
» A warning message is displayed.
Note
5 To proceed, select [Ok] and press OK.
» The progressive setup is complete.
‡ If this product is connected to a HDMI CEC compliant
TV, skip this setting. It switches automatically to the
same OSD menu language as per your TV setting (if the
language set on TV is supported by this product).
Note
‡ If a blank/distorted screen is displayed, wait for 15
seconds for the auto recovery.
‡ If no picture is displayed, turn off the progressive scan
mode as follows:
‡ 1) Press to open the disc compartment.
‡ 2) Press the Numeric button ‘1’.
6 Press SETUP to exit the menu.
7 You can now turn on the progressive scan
mode on the TV (see the TV user manual).
Note
‡ During play, when the progressive scan mode is on for
both this product and the TV, distorted picture may
display. In this case, turn off the progressive scan feature
on both this product and the TV.
‡ꢀ The language options may vary from different
regions.
1 Press SETUP.
» [General Setup] menu is displayed.
2 Select [OSD language], then press .
Use Philips EasyLink
3 Press
to select a language, then press OK.
This product supports Philips EasyLink which uses the
HDMI CEC (Consumer Electronics Control) protocol.
You can use one single remote control to control
EasyLink-compliant devices that are connected
through HDMI connectors.
Turn on progressive scan
Note
‡ To use the progressive scan feature, you must connect
a progressive scan TV with the component video jacks
(see “Connect” > “Connect video cables” > “Option 2:
Connect to the component video jacks” for details).
Note
‡ To enable the EasyLink feature, you must turn on the
HDMI CEC operations on the TV and on other devices
connected to TV. Refer to the TVs/devices manual for
details.
One-touch play
1 Press the STANDBY button to turn on this
product.
» TheTV (if supports one-touch play)
automatically turns on and switches to the
correct video-in channel.
» If a disc is loaded in this product, disc play
automatically starts.
1 Turn on the TV to the correct viewing channel
for this product.
2 Press SETUP.
EN 25
One-touch standby
Play video
1 Press the STANDBY button to switch this
product to standby.
Note
» All the connected devices (if the device
supports one-touch standby) automatically
switch to standby.
‡ Some operations may not work with some discs. See the
information accompanying the disc for details.
Note
Control video play
‡ Philips does not guarantee 100% interoperability with all
1 Play a title.
2 Use the remote control to control the play.
HDMI CEC devices.
Button
Action
Start, pause or resume disc play.
Stop disc play.
5 Play
Play a disc
Caution
Skip to a previous/next title or
chapter.
,
Search fast-backward or fast-
forward. Press repeatedly to change
the search speed.
,
‡ Do not place any objects other than discs into the disc
compartment.
Search slow-forward or slow-
backward. Press repeatedly to
change the search speed.
,
‡ Do not touch the disc optical lens inside the disc
compartment.
For VCD/SVCD, slow-backward
search is not available.
1 Press PUSH TO OPEN to open the disc
compartment.
2 Load a disc with its label facing up.
3 Close the disc compartment and start disc
play.
AUDIO
Select an audio language or channel
available on a disc.
SUBTITLE
REPEAT
Select a subtitle language availabel
on a disc.
‡ꢀ To view disc play, turn on the TV to the
correct viewing channel for this product.
‡ꢀ To stop disc play, press .
Select or turn off repeat mode.
Repeat options may vary from disc
type.
Note
Fit the picture format to the TV
screen.
Press repeatedly until the image is
VFDOHGꢀWRꢀÀWꢀWRꢀWKHꢀ79ꢀVFUHHQꢂ
Toggle between screen aspect ratio
and different zoom factor.
To pan through the zoomed image,
press the Navigation buttons.
ZOOM
ZOOM
INFO
‡ &KHFNꢀWKHꢀW\SHVꢀRIꢀGLVFVꢀVXSSRUWHGꢀꢈVHHꢀ´6SHFLÀFDWLRQVµꢀ
> “Play media”).
‡ If the password entry menu is displayed, enter the
password before you can play the locked or restricted
disc (see “Adjust settings” > “Preferences” > [Parental
Control]).
‡ If you pause or stop a disc, the screen saver appears after
5 minutes of inactivity. To deactivate the screen saver,
press DISC MENU.
‡ After you pause or stop a disc and no button is pressed
within 15 minutes, this product automatically switches
to standby.
Access the play options and display
the current disc status.
Access DVD menu
1 Press DISC MENU to access the disc root
menu.
2 Select a play option, then press OK.
‡ꢀ In some menus, press the Numeric
buttons to input your selection.
26 EN
AccessVCD menu
View DVD play from different angles
The PBC (playback control) feature is available for
VCD/SVCD, which can display the contents menu
for you to select a play option. The PBC is on by
default in the factory.
1 During play, press INFO.
» The disc status menu is displayed.
2 Select [Angle], then press .
3 Press the Numeric buttons to change the
angle.
Note
» Play changes to the selected angle.
‡ See “Adjust settings” > [Preferences] > [PBC] on how
to turn PBC on or off.
Note
‡ Applicable only to discs contain multi-angle scenes.
1 Display the contents menu via one of the
following ways:
‡ꢀ If PBC is on, load in a VCD/SVCD.
‡ꢀ During play with PBC on, press
BACK.
5HSHDWꢀSOD\ꢀIRUꢀDꢀVSHFLÀFꢀVHFWLRQ
1 During play, press REPEAT A-B at the start
point.
2 Press the Numeric buttons to select a play
option, then press OK to start play.
‡ꢀ If PBC is turned off, it skips the menu
GLVSOD\ꢀDQGꢀVWDUWVꢀSOD\ꢀIURPꢀWKHꢀÀUVWꢀ
track.
2 Press REPEAT A-B again to set the end point.
» Repeat play starts.
3 To cancel repeat play, press REPEAT A-B
again.
Preview disc contents
Note
1 During play, press INFO.
» The disc status menu is displayed.
‡ The marked section for repeat play is only possible
within a track/title.
2 Select [Preview], then press .
3 Select a preview option, then press OK.
» A thumbnails preview screen is displayed.
Play DivX® video
‡ꢀ To go to the next/previous prview
screen, select [Prev] or [Next], then
press OK.
‡ꢀ To start play, press OK at the selected
thumbnail picture.
DivX video is a digital media format that retains high
quality despite a high rate of compression. You can
HQMR\ꢀ'LY;ꢀYLGHRꢀRQꢀWKLVꢀ'LY;ꢀFHUWLÀHGꢀSURGXFWꢂ
1 Insert a disc or USB that contains the DivX
videos.
‡ꢀ For USB, press
.
6NLSꢀSOD\ꢀWRꢀDꢀVSHFLÀFꢀWLPH
» A contents menu is displayed.
1 During play, press INFO.
2 Select a title to play, then press OK.
» The disc status menu is displayed.
‡ꢀ You may select subtitle/audio language.
2 Select an option for the current elapsed
playing time, then press .
Note
‡ꢀ [TT Time] (title time)
‡ꢀ [Ch Time] (chapter time)
‡ꢀ [Disc Time] (disc time)
‡ You can only play DivX videos that were rented or
purchased with the DivX registration code of this player
(see “Adjust Settings” - [General Setup] > [DivX® VOD
Code]).
‡ꢀ [Track Time] (track time)
3 Press the Numeric buttons to enter the time
to skip to, then press OK.
Display play time
1 During play, press INFO.
» The disc status menu is displayed.
2 Select [Time Disp.], then press .
» The display options vary from disc type.
3 Select an option, then press OK.
EN 27
Play music
Play photo
Control a track
Play photo as slideshow
1 Play a track.
2 Use the remote control to control the play.
<RXꢀFDQꢀSOD\ꢀ-3(*ꢀSKRWRVꢀꢈÀOHVꢀZLWKꢀꢂMSHJꢀRUꢀꢂMSJꢀ
extensions).
1 Insert a disc or USB that contains the JPEG
photos.
Button
Action
» Slideshow begins (for Kodak disc), or a
contents menu (for JPEG disc) is displayed.
Start, pause or resume disc play.
Stop disc play.
2 Select a photo folder, then press OK to start
slideshow.
Skip to a previous/next track.
Select an item to play.
,
‡ꢀ To preview the photos in thumbnail,
press INFO.
‡ꢀ To select a photo, press the Navigation
buttons.
‡ꢀ To enlarge the selected photo and start
slideshow, press OK.
Searches fast-backward or fast-
forward. Press repeatedly to
change the search speed.
,
‡ꢀ To return to the menu, press
BACK.
REPEAT
Select or turn off repeat mode.
Repeat options may vary from
disc type.
Note
‡ It may require longer time to display the disc content
on the TV due to the large number of songs/photos
compiled onto one disc/USB device.
‡ ,IꢀWKHꢀ-3(*ꢀSKRWRꢀLVꢀQRWꢀUHFRUGHGꢀZLWKꢀDQꢀ¶H[LI·ꢀW\SHꢀ
ÀOHꢁꢀWKHꢀDFWXDOꢀWKXPEQDLOꢀSLFWXUHꢀFDQQRWꢀEHꢀVKRZQꢀRQꢀ
WKHꢀVFUHHQꢂꢀ,WꢀLVꢀUHSODFHGꢀE\ꢀDꢀ¶EOXHꢀPRXQWDLQ·ꢀWKXPEQDLOꢀ
picture.
‡ This player can only display digital camera pictures
according to the JPEG-EXIF format, typically used by
almost all digital cameras. It cannot display Motion JPEG,
or pictures in formats other than JPEG, or sound clips
associated with pictures.
Play MP3/WMA music
03ꢆꢇ:0$ꢀLVꢀDꢀW\SHꢀRIꢀKLJKO\ꢀFRPSUHVVHGꢀDXGLRꢀÀOHꢀ
ꢈÀOHVꢀZLWKꢀꢂPSꢆꢁꢀꢂZPDꢀH[WHQVLRQVꢉꢂ
1 Insert a disc or USB that contains the MP3/
WMA music.
‡ꢀ For USB, press
» A contents menu is displayed.
.
‡ )ROGHUVꢇÀOHVꢀWKDWꢀH[FHHGꢀWKHꢀVXSSRUWHGꢀOLPLWꢀRIꢀWKLVꢀ
player cannot be displayed or played.
2 If play does not automatically start, select a
track to play.
‡ꢀ To select another track/folder, press
then press OK.
,
Control photo play
1 Play a photo slideshow.
2 Use the remote control to control the play.
Note
‡ )RUꢀGLVFꢀUHFRUGHGꢀLQꢀPXOWLSOHꢀVHVVLRQVꢁꢀRQO\ꢀWKHꢀÀUVWꢀ
session is played.
Button
Action
Rotate a photo anti-clockwise/
clockwise.
/
‡ )RUꢀDꢀ:0$ꢀÀOHꢀWKDWꢀLVꢀSURWHFWHGꢀE\ꢀ'LJLWDOꢀ5LJKWVꢀ
Management (DRM), it cannot be played on this product.
‡ This product does not support MP3PRO audio format.
‡ For any special character that is present in the MP3 track
name (ID3) or album name, it might not be displayed
correctly on the screen because these characters are not
supported.
Rotate a photo horizontally/
vertically.
/
Zoom in or out of a photo.
Play pauses in zoom mode.
ZOOM
‡ )ROGHUVꢇÀOHVꢀWKDWꢀH[FHHGꢀWKHꢀVXSSRUWHGꢀOLPLWꢀRIꢀWKLVꢀ
product cannot be displayed or played.
Stop a play.
28 EN
Play musical slideshow
6 Adjust settings
Create a musical slideshow to play MP3/WMA
PXVLFꢀÀOHVꢀDQGꢀ-3(*ꢀSKRWRꢀÀOHVꢀVLPXOWDQHRXVO\ꢂꢀ
Note
Note
‡ If the setup option is grayed out, it means the setting
cannot be changed at the current state.
‡ To create a musical slideshow, you must store the MP3/
:0$ꢀDQGꢀ-3(*ꢀÀOHVꢀRQꢀWKHꢀVDPHꢀGLVFꢇ86%ꢀÁDVKꢀGULYHꢂ
1 Play MP3/WMA music.
General setup
2 Press
BACK to return to the main menu.
3 Navigate to the photo folder/album and press
OK to start slideshow play.
» Slideshow begins and continues till the end
of the photo folder or album.
» Audio continues to play until the end of
the disc.
‡ꢀ To stop slideshow play, press .
‡ꢀ To stop music play, press again.
3OD\ꢀIURPꢀ86%ꢀÁDVKꢀGULYH
This product plays/views MP3,WMA, DivX or JPEG
ÀOHVꢀWKDWꢀDUHꢀVWRUHGꢀRQꢀDꢀ86%ꢀÁDVKꢀGULYHꢂ
1 Press SETUP.
» [General Setup] menu is displayed.
2 Press .
3 Select an option, then press OK.
1ꢀ &RQQHFWꢀDꢀ86%ꢀÁDVKꢀGULYHꢀWRꢀWKHꢀ
this product.
jack on
4 Select a setting, then press OK.
‡ꢀ To return to the previous menu, press .
‡ꢀ To exit the menu, press SETUP.
2 Press the
button.
» A contents menu is displayed.
3ꢀ ,IꢀSOD\ꢀGRHVꢀQRWꢀVWDUWꢀDXWRPDWLFDOO\ꢁꢀVHOHFWꢀDꢀÀOHꢀ
to play.
[Disc Lock]
Set play restriction for a disc which is loaded in
the disc compartment (maximum 20 discs can be
locked).
‡ꢀ For more information, see the chapters
“Play music”, “Play photo” and “Play
video” for details.
‡ꢀ [Lock] - Restrict access to the current disc.
The next time you want to play this disc or
unlock it, you need to enter the password.
‡ꢀ [Unlock] - Play all discs.
4 To stop play, press .
‡ꢀ To switch to the disc mode, press the
button.
Tip
‡ You can set or change the password, go to [Preferences]
> [Password].
[OSD language]
Select an on-screen menu language.
[Sleep Timer]
Switch automatically to standby at the preset time.
‡ꢀ [Off] - Disable sleep mode.
‡ꢀ [15 mins], [30 mins], [45 mins], [60 mins] -
Select the count down time for this product to
switch to standby.
EN 29
[Auto standby]
‡ꢀ [LPCM Output] - Select the LPCM (Linear
Pulse Code Modulation) output sampling rate.
‡ꢀ [48kHz] - For discs recorded at sampling
rate of 48 kHz.
Turn on or off automatically standby.
‡ꢀ [On] - Switch to standby 15 minutes of
inactivity (for example, in pause or stop mode).
‡ꢀ [Off] - Disable the auto standby mode.
‡ꢀ [96kHz] - For discs recorded at sampling
rate of 96 kHz.
[DivX(R) VOD Code]
Display the DivX® registration code.
Note
Tip
‡ [LPCM Output] setting is only available if the [Digital
Output] is set to [PCM Only].
‡ 8VHꢀWKLVꢀSURGXFW·Vꢀ'LY;ꢀUHJLVWUDWLRQꢀFRGHꢀZKHQꢀ\RXꢀUHQWꢀ
videos rented or purchased through the DivX® VOD
(Video On Demand) service can be played only on the
device to which it is registered.
‡ The higher the sampling rate, the better the sound
quality.
[HDMI Audio]
Select the HDMI audio setting when you connect
this product and the TV with an HDMI cable.
‡ꢀ [On] - Allow audio output through the TV and
the speaker system. If the audio format on the
disc is not supported, it will be downmixed to
two-channel sound (linear-PCM).
Audio setup
‡ꢀ [Off] - Disable audio output from the TV.
The sound is only output through the speaker
system.
[Audio Sync]
Set the delay time for audio output when you play
a video disc.
1. Press OK.
2. Press
3. Press OKꢀWRꢀFRQÀUPꢀDQGꢀH[LWꢂ
1 Press SETUP.
to set the volume.
» [General Setup] menu is displayed.
2 Press to select [Audio Setup], then press .
3 Select an option, then press OK.
[Volume]
Set the default volume level when you play a disc.
4 Select a setting, then press OK.
‡ꢀ To return to the previous menu, press .
‡ꢀ To exit the menu, press SETUP.
1. Press OK.
2. Press
to set the volume.
[Analogue Output]
3. Press OKꢀWRꢀFRQÀUPꢀDQGꢀH[LWꢂ
Select an analogue setting based on the audio
device that is connected through the analogue
audio jack.
‡ꢀ [Stereo] - For stereo output.
‡ꢀ [LT/RT] - For surround sound output through
two speakers.
[Sound Mode]
Select a preset sound effect to enhance the audio
output.
‡ꢀ [3D] - Select a virtual surround sound effect
that is produced from the left and right audio
channels.
‡ꢀ [Movie Mode] - Select a sound effect for
movies.
‡ꢀ [Music Mode] - Select a sound effect for
music.
[Digital Audio]
6HOHFWꢀDꢀGLJLWDOꢀVHWWLQJꢀEDVHGꢀRQꢀWKHꢀGLJLWDOꢀDPSOLÀHUꢇ
receiver that is connected through the digital jack
(coaxial/digital).
‡ꢀ [Digital Output] - Select a type of digital
output.
[CD Upsampling]
For better sound quality in stereo mode, convert
the music CD to a higher sampling rate.
‡ꢀ [Off] - Disable digital output.
‡ꢀ [All] - Support multi-channel audio
formats.
‡ꢀ [PCM Only] - Downmix to two-channel
audio format.
30 EN
‡ꢀ [Off] - Turn off CD-upsampling.
‡ꢀ [88.2kHz (X2)] - Convert to twice the original
sampling rate.
‡ꢀ [176.4kHz(X4)] - Convert to four times the
original sampling rate.
‡ꢀ [4:3 Pan Scan] - For 4:3 screen TV: full-height
display with the trimmed sides.
‡ꢀ [4:3 Letter Box] - For 4:3 screen TV: wide-
screen display with black bars on the top and
bottom of the screen.
‡ꢀ [16:9] - For wide-screen TV: display ratio 16:9.
[Night Mode]
Make loud sound level softer and soft sound level
louder so that you can watch the DVD movies at a
low volume, without disturbing others.
‡ꢀ [On] – Enjoy quiet viewing at night.
‡ꢀ [Off] – Enjoy surround sound with a full
dynamic range.
[Progressive]
If a progressive scan TV is connected to this
product, turn on the progressive scan mode.
‡ꢀ [On] - Turn on progressive scan.
‡ꢀ [Off] - Turn off progressive scan mode.
Note
Note
‡ For more detailed description, see “Get started” >
“Turn on progressive scan”.
‡ Applicable only to Dolby Digital encoded DVD.
[Picture Setting]
6HOHFWꢀDꢀSUHGHÀQHGꢀVHWꢀRIꢀSLFWXUHꢀFRORUꢀVHWWLQJVꢀRUꢀ
customize the personal setting.
Video setup
‡ꢀ [Standard] - Original color setting.
‡ꢀ [Bright] - Vibrant color setting.
‡ꢀ [Soft] - Warm color setting.
‡ꢀ [Personal] - Customize the color setting. Set
the level of brightness, contrast, tint and color
saturation, then press OK.
[HD JPEG]
Enjoy untouched and uncompressed JPEG pictures
at its original resolution when you you connect this
product and the TV with an HDMI cable.
‡ꢀ [On]ꢀꢄꢀ'LVSOD\ꢀKLJKꢀGHÀQLWLRQꢀSLFWXUHꢂ
‡ꢀ [Off] - Display standard picture.
1 Press SETUP.
» [General Setup] menu is displayed.
2 Press to select [Video Setup], then press .
3 Select an option, then press OK.
Note
4 Select a setting, then press OK.
‡ꢀ To return to the previous menu, press .
‡ꢀ To exit the menu, press SETUP.
‡ This product supports the resolution display of 720p
and above.
[HDMI Setup]
[TV System]
When you connect this proudct and the TV with an
HDMI cable, select the best HDMI setup that the
TV can support.
‡ꢀ [Resolution] - Select a video resolution that is
compatible with the TV display capability.
Change this setting if the video does not appear
correctly. By default, this setting matches the most
common setting for TVs in your country.
‡ꢀ [PAL] - For PAL-system TV.
‡ꢀ [Multi] - For TV that is compatible with both
PAL and NTSC.
Option
[Auto]
Description
‡ꢀ [NTSC] - For NTSC-system TV.
It detect and select the best
supported video resolution
automatically.
[TV Display]
Select a display format:
[480i], [480p],
[576i], [576p],
[720p], [1080i],
[1080p]
Select a video resolution
that best supported by the
TV. See the TVs manual for
details.
EN 31
Option
Description
Note
[One Touch
Standby]
When you press and hold the
STANDBY button, all connected
HDMI CEC devices switch to
standby mode simultaneously.
‡ꢀ If the setting is not compatible with the TV, a blank
screen appears. Wait for 15 seconds for auto recover or
switch to its default mode as follows:
1) Press ;ꢀto open the disc compartment.
2) Press numeric button ‘1’.
‡ꢀ To disable this feature, select
[Off].
‡ꢀ [Wide Screen Format] ²ꢀGHÀQHꢀWKHꢀZLGHꢀ
screen format for disc play.
Note
Option
Description
‡ꢀ Philips does not guarantee 100% interoperability with all
‡ꢀ HYoDuMmIuCsEt CturcnomonpltiahnetHdDevMicIeCs.EC operations on the TV/
devices before you can enjoy the EasyLink controls. See
the TVs/devices manual for details.
[Superwide]
Center position of the screen is
stretched less than the side.
This setting is only applicable if
the video resolution is set to
720p or 1080i/p.
[4:3 Pillar
Box]
No stretching of the picture.
Black bars are displayed on
both sides of the screen. This
setting is only applicable if the
video resolution is set to 720p
or 1080i/p.
Preferences
Note
‡ Stop disc play before you can access to [Preferences].
[Off]
Picture will be displayed
according to the format of the
disc.
Note
‡ꢀ This setting is only available if you have set the [TV
Display] setting to [16:9].
‡ꢀ [EasyLink Setup] – if this DVD player is
connected to HDMI CEC compliant TV/devices,
all connected devices can respond to the
following commands simultaneously:
1 Press SETUP.
» [General Setup] menu is displayed.
Option
Description
2 Press to select [Preferences], then press .
[EasyLink]
Turn off or turn on all EasyLink
features.
3 Select an option, then press OK.
4 Select a setting, then press OK.
‡ꢀ To return to the previous menu, press .
‡ꢀ To exit the menu, press SETUP.
‡ꢀ To disable this feature, select
[Off].
[One Touch
Play]
When you press the STANDBY
button, it turns on the TV and
this DVD player, then video disc
play starts (if a video disc is
[Audio]
Select an audio language for disc play.
[Subtitle]
Select a subtitle language for disc play.
found in the disc compartment).
[Disc Menu]
Select a disc menu language.
‡ꢀ To disable this feature, select
[Off].
32 EN
Note
Note
‡ If the language you have set is not available on the disc,
the disc uses its own default language.
‡ ,Iꢀ\RXꢀIRUJHWꢀWKHꢀSDVVZRUGꢁꢀHQWHUꢀ¶ꢊꢆꢋꢌꢍꢍ·ꢀEHIRUHꢀ\RXꢀVHWꢀ
a new password.
‡ For some DVDs, the subtitle/audio language can only
change from the disc menu.
[DivX Subtitle]
Select a character set that supports the DivX
subtitle.
‡ To select the languages that are not listed in the menu,
select [Others]. Then check the Language Code list at
the back of this user manual and enter the respective
language code.
‡ꢀ >ˊஔꢀኘͧꢁ@ -6LPSOLÀHGꢀ&KLQHVH
[Parental control]
Note
Restrict access to discs that are unsuitable for
children. These types of discs must be recorded
with ratings.
‡ (QVXUHꢀWKDWꢀWKHꢀVXEWLWOHꢀÀOHꢀKDVꢀWKHꢀH[DFWꢀVDPHꢀÀOHꢀQDPHꢀ
DVꢀWKHꢀPRYLHꢀÀOHꢂꢀ,IꢀIRUꢀH[DPSOHꢀWKHꢀÀOHꢀQDPHꢀRIꢀWKHꢀ
PRYLHꢀLVꢀ¶0RYLHꢂDYL·ꢁꢀWKHQꢀ\RXꢀQHHGꢀWRꢀQDPHꢀWKHꢀWH[WꢀÀOHꢀ
¶0RYLHꢂVXE·ꢀRUꢀ¶0RYLHꢂVUW·ꢂꢀ
1. Press OK.
2. Select a rating level, then press OK.
3. Press the numeric buttons to enter the
password.
[Version Info]
Display the software version of this product.
Tip
Note
‡ 7KLVꢀLQIRUPDWLRQꢀLVꢀUHTXLUHGꢀZKHQꢀ\RXꢀZDQWꢀWRꢀÀQGꢀRXWꢀ
if a newest software version is available at the Philips
website that you may download and install on this
product.
‡ Rated DVDs above the level you set in [Parental
control] require a password to be played.
‡ The ratings are country-dependent. To allow all discs to
play, select ‘8·ꢂ
‡ Some discs have ratings printed on them but are not
recorded with ratings. This function has no effect on
such discs.
[Default]
Reset all the settings of this product to factory
default, except for [Disc Lock], [Parental control]
and [Password] settings.
[PBC]
Turn on or off the content menu of VCDs/SVCDs
with PBC (playback control) feature.
‡ꢀ [On] - Display the index menu when you load
a disc for play.
7 Additional information
‡ꢀ [Off] - Skip the menu and start play from the
ÀUVWꢀWLWOHꢂ
Update software
For software updates, check the current software
version of this product to compare with the latest
software (if available) at the Philips website.
[MP3/JPEG Nav]
6HOHFWꢀWRꢀGLVSOD\ꢀWKHꢀIROGHUVꢀRUꢀGLVSOD\ꢀDOOꢀWKHꢀÀOHVꢂ
‡ꢀ [View Files]ꢀꢄꢀ'LVSOD\ꢀDOOꢀWKHꢀÀOHVꢂ
‡ꢀ [View Folders] - Display the folders of MP3/
:0$ꢀÀOHVꢂ
Caution
‡ Power supply must not be interrupted during software
[Password]
Set or change the password for locked discs and
play restricted DVDs.
upgrade.
1 Press SETUP.
2 Select [Preferences] > [Version Info], then
press OK.
1. Press the Numeric buttonsꢀWRꢀHQWHUꢀ¶ꢊꢆꢋꢌꢍꢍ·ꢀRUꢀ
the last set password at [Old Password]ꢀÀHOGꢂ
2. Enter the new password at [New Password]
ÀHOGꢂ
3. Enter the new password again at >&RQÀUPꢀ
PWD]ꢀÀHOGꢂ
4. Press OK to exit the menu.
‡ꢀ Stop disc play before you can access to
[Preferences].
3 Write down the software version and the
model name, then press SETUP to exit the
menu.
EN 33
Video format
the latest software version.
‡ꢀ Digital compression:
‡ꢀ DVD/SVCD/VCD/DivX
‡ꢀ Horizontal resolution:
‡ꢀ DVD: 720 pixels (50 Hz);
720 pixels (60 Hz)
‡ꢀ VCD: 352 pixels (50 Hz);
352 pixels (60 Hz)
‡ꢀ Vertical resolution:
‡ꢀ DVD: 576 pixels (50 Hz);
480 pixels (60 Hz)
5 Refer to the upgrade instructions on the
website for more information.
Note
‡ Disconnect the power cord for a few seconds and
connect again to turn on the product.
‡ꢀ VCD: 288 lines (50 Hz); 240 lines (60 Hz)
Care
Audio performance
‡ꢀ DA converter: 24 bits, 192 kHz
‡ꢀ Frequency response:
Caution
‡ Never use solvents such as benzene, thinner, cleaners
available commercially, or anti-static sprays intended
for discs.
‡ꢀ DVD: 4 Hz - 22 kHz (48 kHz);
4 Hz - 44 kHz (96 kHz)
‡ꢀ SVCD: 4 Hz - 20 kHz (44.1 kHz);
4 Hz - 22 kHz (48 kHz)
Clean discs
:LSHꢀWKHꢀGLVFꢀZLWKꢀDꢀPLFURꢀÀEUHꢀFOHDQLQJꢀFORWKꢀIURPꢀ
the centre to the edge in a straight line movement.
‡ꢀ CD/VCD: 4 Hz - 20 kHz (44.1 kHz)
‡ꢀ Signal-Noise (1 kHz): > 90 dB (A-weighted)
‡ꢀ Dynamic range (1 kHz): > 80 dB (A-weighted)
‡ꢀ Crosstalk (1 kHz): > 70 dB
‡ꢀ Distortion/noise (1 kHz): > 65 dB
‡ꢀ MP3: MPEG L3
6SHFLÀFDWLRQV
Note
Audio format
‡ꢀ Digital:
‡ 6SHFLÀFDWLRQꢀDQGꢀGHVLJQꢀDUHꢀVXEMHFWꢀWRꢀFKDQJHꢀZLWKRXWꢀ
‡ꢀ MPEG/AC-3: Compressed digital (16, 20,
24 bits, fs 44.1, 48, 96 kHz)
notice
‡ꢀ MP3: 96, 112, 128, 256 kbps & variable bit
rate, fs 32, 44.1, 48 kHz
‡ꢀ Analog sound stereo
‡ꢀ Dolby surround compatible downmix from
Dolby Digital multi-channel sound
Accessories supplied
‡ꢀ Remote control and batteries
‡ꢀ Power cord
‡ꢀ Audio/Video cables
‡ꢀ User manual
Connections
Play media
‡ꢀ Y Pb Pr output: Cinch 3x
‡ꢀ Video output: Cinch (yellow)
‡ꢀ Audio output (L+R): Cinch (white/red)
‡ꢀ Digital output:
‡ꢀ 1 coaxial: IEC60958 for CDDA/LPCM;
IEC61937 for MPEG 1/2, Dolby Digital
‡ꢀ HDMI output
‡ꢀ DVD-Video, Video CD/SVCD, Audio CD,
CD-R/CD-RW, DVD+R/+RW, DVD-R/-RW,
DivX-CD, Picture CD, MP3-CD, WMA-CD,
86%ꢀÁDVKꢀGULYH
USB
‡ꢀ Compatibility: Hi-Speed USB (2.0)
‡ꢀ Class support: UMS (USB Mass Storage Class)
Main unit
‡ꢀ Dimensions (w x h x d): 179 x 49 x 179 (mm)
‡ꢀ Net Weight: approximately 0.5 kg
TV standard
‡ꢀ Number of lines:
‡ꢀ 625 (PAL/50Hz); 525 (NTSC/60Hz)
‡ꢀ Play: Multi-standard (PAL/NTSC)
Power
‡ꢀ Power supply rating:
‡ꢀ For U.K.: 240 V; 50 Hz
Video performance
‡ꢀ For the rest of Europe: 230 V; 50 Hz
‡ꢀ Power consumption: <10 W
‡ꢀ Power consumption in standby mode: <1 W
‡ꢀ Video DAC: 12 bits, 108 MHz
‡ꢀ Composite video output: 1 Vpp ~ 75 ohm
‡ꢀ Component video output: 0.7 Vpp ~ 75 ohm
34 EN
/DVHUꢀVSHFLÀFDWLRQ
No picture on HDMI connection.
‡ꢀ Type: Semiconductor laser InGaAIP (DVD),
AIGaAs (CD)
‡ꢀ If this product is connected to an unauthorized
display device with an HDMI cable, the audio/
video signal may not be output.
‡ꢀ Check if the HDMI cable is faulty. Replace a
new HDMI cable.
‡ꢀ Wave length: 658 nm (DVD), 790 nm (CD)
‡ꢀ Output Power: 7.0 mW (DVD), 10.0 mW
(VCD/CD)
‡ꢀ Beam divergence: 60 degrees
‡ꢀ If this happens when you change the HDMI
video resolution, you have to switch to its
default mode: 1) Press PUSH TO OPEN
to open the disc compartment. 2) Press the
numeric button “1”.
8 Troubleshooting
Warning
Sound
No audio output from the TV.
‡ꢀ Ensure that the audio cables are connected to
the audio input of the TV.
‡ Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, register your product and get
If you contact Philips, you will be asked for the model
and serial number of your product.The model
number and serial number are on the back of your
product.Write the numbers here:
‡ꢀ Assign the audio input of the TV to the
corresponding video input. See the TV user
manual for details.
No audio output from the loudspeakers of the
DXGLRꢀGHYLFHꢀꢂVWHUHRꢀV\VWHPꢁDPSOLÀHUꢁUHFHLYHUꢃꢄ
‡ꢀ Ensure that the audio cables are connected to
the audio input of the audio device.
‡ꢀ Turn on the audio device to its correct audio
input source.
No sound on HDMI connection.
‡ꢀ You may not hear any sound from the HDMI
output if the connected device is non-HDCP
compliant or only DVI-compatible.
‡ꢀ Ensure that the [HDMI Audio] setting is
turned on.
Model No. __________________________
Serial No. ___________________________
Main unit
The buttons on this unit do not work.
‡ꢀ Disconnect this product from the power
outlet for a few minutes, then connect again.
No sound during DivX video playback
‡ꢀ The audio codec may not be supported by this
product.
No reaction to the remote control.
‡ꢀ Connect this product to the power outlet.
‡ꢀ Point the remote control at the IR sensor
located on the front panel of this product.
‡ꢀ Insert the batteries correctly.
Play
'LY;ꢀYLGHRꢀÀOHVꢀFDQQRWꢀEHꢀSOD\HGꢄ
‡
‡
(QVXUHꢀWKDWꢀWKHꢀ'LY;ꢀYLGHRꢀÀOHꢀLVꢀFRPSOHWHꢂ
(QVXUHꢀWKDWꢀWKHꢀÀOHꢀQDPHꢀH[WHQVLRQꢀLVꢀFRUUHFWꢂ
‡ꢀ Insert new batteries in the remote control.
Picture
The aspect ratio of the screen is not aligned with
theTV display setting.
No picture.
‡
See the TVs user manual on how to select
the correct input on the TV. Change the TV
channel until you see the Philips screen.
If you have turned on the progressive scan
setting or change the TV system setting,
switch back to default mode: 1) Press to
open the disc compartment. 2) Press the
Numeric button ‘1’ (for progressive scan) or
the Numeric button’3’ (for TV system).
‡ꢀ 7KHꢀDVSHFWꢀUDWLRꢀLVꢀÀ[HGꢀRQꢀWKHꢀGLVFꢂ
DivX subtitles are not displayed correctly.
‡
(QVXUHꢀWKDWꢀWKHꢀVXEWLWOHꢀÀOHꢀQDPHꢀLVꢀWKHꢀVDPHꢀ
DVꢀWKHꢀPRYLHꢀÀOHꢀQDPHꢂ
‡
‡
Select the correct character set.
‡ꢀ Press SETUP.
‡ꢀ Select [Preferences] > [DivX Subtitle] in
the menu.
‡ꢀ Select the character set that supports the
subtitle.
EN 35
7KHꢀFRQWHQWVꢀRIꢀWKHꢀ86%ꢀÁDVKꢀGULYHꢀFDQQRWꢀEHꢀUHDGꢄ
P
PBC
‡
7KHꢀ86%ꢀÁDVKꢀGULYHꢀIRUPDWꢀLVꢀQRWꢀFRPSDWLEOHꢀ
with the digital receiver.
‡
7KHꢀGULYHꢀLVꢀIRUPDWWHGꢀZLWKꢀDꢀÀOHꢀV\VWHPꢀZKLFKꢀ
is not supported by this product (e.g. NTFS).
Playback Control. A system where you navigate
through a Video CD/Super VCD with on-screen
menus that are recorded onto the disc. You can
enjoy interactive playback and search.
9 Glossary
Progressive scan
The progressive scan displays twice the number of
frames per second than in an ordinary TV system. It
offers higher picture resolution and quality.
A
Aspect ratio
Aspect ratio refers to the length to height ratio of
TV screens. The ratio of a standard TV is 4:3, while
WKHꢀUDWLRꢀRIꢀDꢀKLJKꢄGHÀQLWLRQꢀRUꢀZLGHꢀ79ꢀLVꢀꢊꢋꢎꢌꢂꢀ
The letter box allows you to enjoy a picture with a
wider perspective on a standard 4:3 screen.
W
WMA
Windows Media™ Audio. Refers to an audio
compression technology developed by Microsoft
Corporation. WMA data can be encoded with
Windows Media player version 9 or Windows
Media player for Windows XP. Files are recognized
E\ꢀWKHLUꢀÀOHꢀH[WHQVLRQꢀ¶ꢂZPDꢂ·
D
DivX Video-On-Demand
®
7KLVꢀ'LY;ꢀ&HUWLÀHGꢀ device must be registered
in order to play DivX Video-on-Demand (VOD)
content. To generate the registration code, locate
the DivX VOD section in your device setup menu.
Go to vod.divx.com with this code to complete the
registration process and learn more about DivX
video.
J
JPEG
A very common digital still picture format. A still-
picture data compression system proposed by the
Joint Photographic Expert Group, which features
small decrease in image quality in spite of its high
FRPSUHVVLRQꢀUDWLRꢂꢀ)LOHVꢀDUHꢀUHFRJQL]HGꢀE\ꢀWKHLUꢀÀOHꢀ
H[WHQVLRQꢀ¶ꢂMSJ·ꢀRUꢀ¶ꢂMSHJꢂ·
M
MP3
$ꢀÀOHꢀIRUPDWꢀZLWKꢀDꢀVRXQGꢀGDWDꢀFRPSUHVVLRQꢀ
system. MP3 is the abbreviation of Motion Picture
Experts Group 1 (or MPEG-1) Audio Layer 3. With
the MP3 format, one CD-R or CD-RW can contain
about 10 times more data than a regular CD.
36 EN
Language Code
Abkhazian
Afar
Afrikaans
Amharic
6566
6565
6570
6577
6582
7289
6583
6569
6589
6590
7783
6665
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
Inupiaq
Irish
Íslenska
Italiano
Ivrit
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Kernewek
Khmer
7375
7165
7383
7384
7269
7465
7486
7576
7578
7583
7575
7587
7577
8287
7589
7586
7579
Pushto
8083
8285
8185
8277
8279
8278
8377
8371
8365
8367
8382
8378
8381
8368
8373
8373
8376
8379
8384
7882
8385
7073
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9085
Russian
Quechua
Raeto-Romance
Romanian
Rundi
Samoan
Sango
Sanskrit
Sardinian
Serbian
Shona
Arabic
Armenian
Assamese
Avestan
Aymara
Azerhaijani
Bahasa Melayu
Bashkir
Belarusian
Bengali
Bihari
Bislama
Bokmål, Norwegian
Bosanski
Brezhoneg
Bulgarian
Burmese
Castellano, Español
Catalán
Chamorro
Chechen
Chewa; Chichewa;Nyanja7889
Ё᭛
Chuang; Zhuang
Church Slavic; Slavonic 6785
Chuvash
Corsican
Česky
Shqip
Sindhi
Kinyarwanda
Kirghiz
Komi
Sinhalese
Slovensky
Slovenian
Somali
Sotho; Southern
South Ndebele
Sundanese
Suomi
Swahili
Swati
Svenska
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Türkçe
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Korean
Kuanyama; Kwanyama 7574
Kurdish
Lao
Latina
Latvian
Letzeburgesch;
Limburgan; Limburger 7673
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Magyar
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho; Navajo
Ndebele, North
Ndebele, South
Ndonga
Nederlands
Nepali
Norsk
Northern Sami
North Ndebele
Norwegian Nynorsk;
Occitan; Provencal
Old Bulgarian;Old Slavonic 6785
Oriya
Oromo
Ossetian; Ossetic
Pali
Panjabi
Persian
Polski
Português
7585
7679
7665
7686
7666
7678
7684
7666
7775
7771
7285
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7868
7882
7871
7876
7869
7879
8369
7868
7878
7967
9072
9065
6786
6779
6783
6865
6869
6890
6978
6979
6984
6985
6976
7079
7082
7089
7074
Dansk
Deutsch
Dzongkha
English
Esperanto
Estonian
Euskara
Faroese
Français
Frysk
Fijian
Gaelic; Scottish Gaelic 7168
Gallegan
Georgian
Gikuyu; Kikuyu
Guarani
Gujarati
Hausa
Herero
Hindi
Hiri Motu
Hrwatski
Ido
7176
7565
7573
7178
7185
7265
7290
7273
7279
6779
7379
7982
7977
7983
8073
8065
7065
8076
8084
Interlingua (International)7365
Interlingue
Inuktitut
7365
7385
37
© 2009 Koninklijke Philips Electronics N.V.
All rights reserved.
DVP4320_93_UM_V1.0_928
|