Philips DVP4080 User Manual

DVDVIDEO PLAYER  
DVP4050  
DVP4080  
DVP4088  
DVP4090  
User Manual  
6
36  
66  
96  
使用手册 (简体)  
使用手册 (繁體)  
Manual Pengguna  
Read your Quick Start Guide and/or User Manual first for quick tips  
that make using your Philips product more enjoyable.  
Register your product and get support  
dvp4090-88-80-50_98_cover.indd  
1
2007-10-11 1:32:28 PM  
Index  
The apparatus shall not be exposed to  
dripping or splashing and that no objects filled  
with liquids, such as vases, shall be placed on  
apparatus.  
English------------------------------------ 6  
------------------------------36  
-----------------------------66  
‘CONSUMERS SHOULD NOTETHAT NOT ALL HIGH  
DEFINITIONTELEVISION SETS ARE FULLY  
COMPATIBLEWITHTHIS PRODUCT AND MAY CAUSE  
ARTIFACTSTO BE DISPLAYED INTHE PICTURE. IN  
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE  
PROBLEMS, IT IS RECOMMENDEDTHATTHE USER  
SWITCHTHE CONNECTIONTOTHE ‘STANDARD  
DEFINITION’ OUTPUT. IFTHERE ARE QUESTIONS  
REGARDING OURTV SET COMPATIBILITYWITHTHIS  
MODEL 525p AND 625p DVD PLAYER, PLEASE  
Bahasa Melayu--------------------------96  
CONTACT OUR CUSTOMER SERVICE CENTER.’  
This product incorporates copyright protection  
technology that is protected by method claims of  
certain U.S. patents and other intellectual property  
rights owned by Macrovision Corporation and  
other rights owners. Use of this copyright protec-  
tion technology must be authorized by Macrovi-  
sion Corporation, and is intended for home and  
other limited viewing uses only unless otherwise  
authorized by Macrovision Corporation. Reserve  
engineering or disassembly is prohibited.  
3
dvp4090-88-80-50_98_cover.indd  
3
2007-10-11 1:32:32 PM  
General Information  
Laser Safety  
This unit employs a laser. Due to possible  
eye injury, only a qualified service person  
should remove the cover or attempt to  
service this device.  
Manufactured under license from Dolby  
Laboratories, Dolby and the double-D symbol are  
trademarks of Dolby Laboratories.  
NOTE:  
Pictures shown maybe different  
between countries.  
Windows Media and the Windows logo are  
trademarks, or registered trademarks of Microsoft  
Corporation in the United States and/or other  
countries.  
CAUTION:  
WARNING LOCATION: ON THE  
BACKPLATE OF THE SET  
NEVER MAKE OR CHANGE  
CONNECTIONS WITH THE POWER  
SWITCHED ON.  
For Customer Use:  
LASER  
Read carefully the information located at  
the bottom or rear of your DVD Video  
player and enter below the Serial No.  
Retain this information for future  
reference.  
Type  
Semiconductor laser  
InGaAlP (DVD)  
AIGaAs (CD)  
658 nm (DVD)  
790 nm (CD)  
7.0 mW (DVD)  
10.0 mW (VCD/CD)  
60 degrees  
Wave length  
Output Power  
Beam divergence  
Model No. DVP4050, 4080, 4088, 4090  
Serial No. _______________________  
4
dvp4090-88-80-50_98_cover.indd  
4
2007-10-11 1:32:41 PM  
Language Code  
Abkhazian  
Afar  
Afrikaans  
Amharic  
6566  
6565  
6570  
6577  
6582  
7289  
6583  
6569  
6589  
6590  
7783  
6665  
6669  
6678  
6672  
6673  
7866  
6683  
6682  
6671  
7789  
6983  
6765  
6772  
6769  
Inupiaq  
Irish  
Íslenska  
Italiano  
Ivrit  
Japanese  
Javanese  
Kalaallisut  
Kannada  
Kashmiri  
Kazakh  
Kernewek  
Khmer  
7375  
7165  
7383  
7384  
7269  
7465  
7486  
7576  
7578  
7583  
7575  
7587  
7577  
8287  
7589  
7586  
7579  
Pushto  
8083  
8285  
8185  
8277  
8279  
8278  
8377  
8371  
8365  
8367  
8382  
8378  
8381  
8368  
8373  
8373  
8376  
8379  
8384  
7882  
8385  
7073  
8387  
8383  
8386  
8476  
8489  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8483  
8478  
8482  
8475  
8487  
8571  
8575  
8582  
8590  
8673  
8679  
8765  
6789  
8779  
8872  
8973  
8979  
9085  
Russian  
Quechua  
Raeto-Romance  
Romanian  
Rundi  
Samoan  
Sango  
Sanskrit  
Sardinian  
Serbian  
Shona  
Arabic  
Armenian  
Assamese  
Avestan  
Aymara  
Azerhaijani  
Bahasa Melayu  
Bashkir  
Belarusian  
Bengali  
Bihari  
Bislama  
Bokmål, Norwegian  
Bosanski  
Brezhoneg  
Bulgarian  
Burmese  
Castellano, Español  
Catalán  
Chamorro  
Chechen  
Chewa; Chichewa; Nyanja7889  
中文  
Chuang; Zhuang  
Church Slavic; Slavonic 6785  
Chuvash  
Corsican  
Česky  
Shqip  
Sindhi  
Kinyarwanda  
Kirghiz  
Komi  
Sinhalese  
Slovensky  
Slovenian  
Somali  
Sotho; Southern  
South Ndebele  
Sundanese  
Suomi  
Swahili  
Swati  
Svenska  
Tagalog  
Tahitian  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga (Tonga Islands)  
Tsonga  
Tswana  
Türkçe  
Turkmen  
Twi  
Uighur  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapuk  
Walloon  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Korean  
Kuanyama; Kwanyama 7574  
Kurdish  
Lao  
Latina  
Latvian  
Letzeburgesch;  
Limburgan; Limburger 7673  
Lingala  
Lithuanian  
Luxembourgish;  
Macedonian  
Malagasy  
Magyar  
Malayalam  
Maltese  
Manx  
Maori  
Marathi  
Marshallese  
Moldavian  
Mongolian  
Nauru  
Navaho; Navajo  
Ndebele, North  
Ndebele, South  
Ndonga  
Nederlands  
Nepali  
Norsk  
Northern Sami  
North Ndebele  
Norwegian Nynorsk;  
Occitan; Provencal  
Old Bulgarian;Old Slavonic 6785  
Oriya  
Oromo  
Ossetian; Ossetic  
Pali  
Panjabi  
Persian  
Polski  
Português  
7585  
7679  
7665  
7686  
7666  
7678  
7684  
7666  
7775  
7771  
7285  
7776  
7784  
7186  
7773  
7782  
7772  
7779  
7778  
7865  
7886  
7868  
7882  
7871  
7876  
7869  
7879  
8369  
7868  
7878  
7967  
9072  
9065  
6786  
6779  
6783  
6865  
6869  
6890  
6978  
6979  
6984  
6985  
6976  
7079  
7082  
7089  
7074  
Dansk  
Deutsch  
Dzongkha  
English  
Esperanto  
Estonian  
Euskara  
ꢀꢁꢁꢂꢃꢄꢅꢆ  
Faroese  
Français  
Frysk  
Fijian  
Gaelic; Scottish Gaelic 7168  
Gallegan  
Georgian  
Gikuyu; Kikuyu  
Guarani  
Gujarati  
Hausa  
Herero  
Hindi  
Hiri Motu  
Hrwatski  
Ido  
7176  
7565  
7573  
7178  
7185  
7265  
7290  
7273  
7279  
6779  
7379  
7982  
7977  
7983  
8073  
8065  
7065  
8076  
8084  
Interlingua (International)7365  
Interlingue  
Inuktitut  
7365  
7385  
5
dvp4090-88-80-50_98_cover.indd  
5
2007-10-11 1:32:44 PM  
Contents  
Language Code................................................... 5  
Disc Operations  
Playable Discs ................................................. 18  
Region Codes ................................................. 18  
Playing discs..................................................... 19  
Basic playback controls................................. 19  
Selecting various repeat/shuffle functions 20  
Repeat play mode ......................................... 20  
Repeating a section within a chapter/track .  
.......................................................................... 20  
Operations for video playback (DVD/VCD/  
SVCD) ........................................................ 21-22  
Using the Disc Menu.................................... 21  
Zooming in ..................................................... 21  
Slow motion................................................... 21  
Forward / Reverse Searching ..................... 21  
OSD (On-Screen Display) .......................... 22  
Special DVD Features ................................... 23  
Playing aTitle ................................................. 23  
Changing the Audio Language .................... 23  
Subtitles .......................................................... 23  
SpecialVCD & SVCD Features ................... 23  
Playback Control (PBC) .............................. 23  
Playing MP3/WMA/JPEG (Kodak) Picture CD  
........................................................................... 24  
General Operation....................................... 24  
Playback selection ......................................... 24  
Repeat ............................................................. 24  
Fast forward / reverse (MP3/WMA) ........ 24  
Introduction  
Supplied accessories ....................................... 8  
Cleaning discs ................................................... 8  
Setup ................................................................... 8  
Connections  
ConnectingTV............................................ 9-10  
Using CompositeVideo jacks (CVBS)........ 9  
Using ComponentVideo jacks (Pr PbY) ... 9  
Using an accessory RF modulator ............ 10  
Connecting the power cord........................ 10  
Optional : Connecting to a Stereo System ..  
........................................................................... 11  
Stereo system has Dolby Pro Logic or Right  
/ Left Audio In jack ....................................... 11  
Optional: Connecting Digital AV Receiver ...  
........................................................................... 11  
Receiver has a PCM, Dolby Digital, or  
MPEG2 decoder............................................ 11  
Functional Overview  
Front and Rear Panels .................................. 12  
Remote Control ............................................ 13  
Getting Started  
Step 1: Inserting batteries into the  
Remote Control ............................................ 14  
Using the Remote Control to operate the  
Player ............................................................... 14  
Step 2: Setting up theTV ........................14-16  
Setting up Progressive Scan feature (for  
Progressive ScanTV only)........................... 15  
Selecting the colour system that  
corresponds to yourTV.............................. 16  
Step 3: Setting language preference ........... 17  
Setting the OSD Language.......................... 17  
Setting the Audio, Subtitle and Disc menu  
language .......................................................... 17  
6
01-35_DVP4080_4050_93_98_Eng  
6
20/09/06, 5:34 PM  
Contents  
DVD Menu Options  
General Setup menu ..................................... 25  
Sleep ................................................................ 25  
OSD Language............................................... 25  
Audio Setup Menu ......................................... 26  
Setting the Downmix................................... 26  
Digital Audio Setup....................................... 26  
Video Setup Menu ...................................27-28  
TVType ........................................................... 27  
Setting theTV Display ................................. 27  
Progressive - turning on/off ........................ 28  
Sharpness........................................................ 28  
Brightness / Contrast / Color.................... 28  
Preference Page........................................ 29-31  
Audio, Subtitle, Disc Menu.......................... 29  
Restricting playback by Parental Control.....  
.................................................................. 29-30  
Changing the Password ............................... 31  
Restoring to original settings ..................... 31  
Troubleshooting .......................... 32-33  
Specifications ...................................... 34  
Glossary ......................................................................35  
7
01-35_DVP4080_4050_93_98_Eng  
7
20/09/06, 5:34 PM  
Introduction  
Supplied accessories  
Setup  
Finding a suitable location  
– Place the set on a flat, hard and stable  
surface. Do not place the set on a carpet.  
– Do not position the set on top of  
other equipment that might heat it up  
(e.g., receiver or amplifier).  
Composite video  
cable (yellow)  
Audio cable  
(white, red)  
– Do not put anything under the set (e.g.,  
CDs, magazines).  
– Install this system near the AC outlet  
and where the AC power plug can be  
reached easily.  
Space for ventilation  
AC power cable  
– Place the apparatus in a location with  
adequate ventilation to prevent internal  
heat build up. Allow at least 10 cm (4.0”)  
clearance from the rear and the top of  
the set and 5cm (2.0”) from the left and  
right to prevent overheating.  
Remote Control  
and  
two AAA batteries  
5cm (2.0")  
10cm (4.0")  
5cm (2.0")  
10cm (4.0")  
Cleaning discs  
To clean a disc, use a micro fibre cleaning  
cloth and wipe the disc from the center  
to the edge in a straight line.  
Avoid high temperatures, moisture,  
water and dust  
CAUTION!  
– Apparatus shall not be exposed to  
Do not use solvents such as benzene,  
thinner, commercially available cleaners, or  
anti-static sprays intended for discs.  
dripping or splashing.  
– Do not place any sources of danger on  
the apparatus (e.g., liquid filled objects,  
lighted candles).  
Since the optical unit (laser) of the DVD  
system operates at a higher power than  
regular DVD or CD players, cleaning CDs  
intended for DVD or CD players may  
damage the optical unit (laser).Therefore,  
refrain from using a cleaning CD.  
8
01-35_DVP4080_4050_93_98_Eng  
8
20/09/06, 5:34 PM  
Connections  
ConnectingTV  
COMPONENT  
VIDEO IN  
COMPONENT  
VIDEO IN  
S-VIDEO  
IN  
S-VIDEO  
IN  
V
U
Y
(Pr/Cr)  
AUDIO  
IN  
V
U
Y
(Pr/Cr)  
AUDIO  
IN  
(Pb/Cb)  
(Pb/Cb)  
VIDEO IN  
VIDEO IN  
COMPONENT  
VIDEO IN  
S-VIDEO  
IN  
V
U
Y
(Pr/Cr)  
AUDIO  
IN  
COMPONENT  
VIDEO IN  
(Pb/Cb)  
S-VIDEO  
IN  
V
I
D
E
O
I
N
V
U
Y
(Pr/Cr)  
AUDIO  
IN  
(Pb/Cb)  
V
I
D
E
O
I
N
1
2
1
2
IMPORTANT!  
IMPORTANT!  
– The progressive scan video  
quality is only possible when usingY  
Pb Pr and a progressive scanTV is  
required.  
You only need to make one video  
connection from the following  
options, depending on the  
capabilities of yourTV system.  
– Connect the DVD system directly  
to theTV.  
Using ComponentVideo jacks  
(Y Pb Pr)  
Using CompositeVideo jacks  
(CVBS)  
1 Use the component video cables (red/  
blue/green) to connect the DVD system’s  
Y Pb Pr jacks to the corresponding  
1 Use the composite video cable (yellow) to  
connect the DVD Player’s CVBS (VIDEO)  
jack to the video input jack (or labeled as  
A/V In,Video In, Composite or Baseband)  
on theTV (cable supplied).  
Component video input jacks (or labeled  
asY Pb Pr) on theTV (cable not supplied).  
2 To hear the sound of this DVD Player  
through yourTV, use the audio cables  
(white/red) to connect AUDIO OUT (L/  
R) jacks of the DVD Player to the  
corresponding AUDIO IN jacks on theTV  
(cable supplied).  
2 To hear the sound of this DVD Player  
through yourTV, use the audio cables  
(white/red) to connect AUDIO OUT (L/  
R) jacks of the DVD Player to the  
corresponding AUDIO IN jacks on theTV  
(cable supplied).  
3 Proceed to page 15 for detailed  
Progressive Scan set up.  
9
01-35_DVP4080_4050_93_98_Eng  
9
20/09/06, 5:34 PM  
Connections  
Connecting the power cord  
RF coaxial cable toTV  
2
Back of RF Modulator  
(example only)  
INT IN  
TO TV  
AUDIO IN  
VIDEO  
IN  
R
L
CH3 CH4  
COMPONENT  
VIDEO IN  
S-VIDEO  
IN  
V
U
Y
(Pr/Cr)  
AUDIO  
OUT  
~
AC MAINS  
(Pb/Cb)  
VIDEO IN  
Antenna or  
CableTV signal  
1
IMPORTANT!  
After everything is connected  
properly, plug in the AC power cord  
to the power outlet.  
Never make or change any connections  
with the power switched on.  
– If yourTV only has a single  
Antenna In jack (or labeled as 75  
ohm or RF In,) you will need an RF  
modulator in order to view the DVD  
playback on theTV. See your  
electronics retailer or contact  
Philips for details on RF modulator  
availability and operations.  
Using an accessory RF modulator  
1 Use the composite video cable (yellow) to  
connect the DVD Player’s CVBS jack to  
the video input jack on the RF modulator.  
2 Use the RF coaxial cable (not supplied) to  
connect the RF modulator to yourTV’s  
RF jack.  
10  
01-35_DVP4080_4050_93_98_Eng  
10  
20/09/06, 5:34 PM  
Connections  
Optional: Connecting to a Stereo  
System  
Optional: Connecting Digital AV  
Receiver  
STEREO  
OPTICAL  
OPTICAL  
AUDIO  
IN  
AV Receiver  
AUDIO  
IN  
DIGITAL  
DIGITAL  
Stereo system has Dolby Pro Logic  
or Right / Left Audio In jack  
Receiver has a PCM, Dolby Digital,  
or MPEG2 decoder  
1 Select one of the video connections  
(CVBSVIDEO IN or COMPONENT  
VIDEO IN) depending on the options  
available on yourTV.  
1 Select one of the video connections  
(CVBSVIDEO IN or COMPONENT  
VIDEO IN) depending on the options  
available on yourTV.  
2 Connect the COAXIAL jack of the DVD  
Player to the corresponding Digital Audio  
In jack on your Receiver (cable not  
supplied).  
2 Use the audio cables (white/red) to  
connect AUDIO OUT (L/R) jacks of  
the DVD Player to the corresponding  
AUDIO IN jacks on the stereo system  
(cable supplied).  
3 Set the DVD Player’s Digital Output to  
PCM-ONLY or ALL depending on the  
capabilities of your Receiver (see page 26  
Digital Output).  
Tip:  
If the audio format of the Digital Output  
does not match the capabilities of your  
receiver, the receiver will produce a strong,  
distorted sound or no sound at all.  
11  
01-35_DVP4080_4050_93_98_Eng  
11  
20/09/06, 5:34 PM  
Functional Overview  
Front and Rear Panels  
ON  
LED lights up when the power is on  
STANDBY  
IR Sensor  
– Point the remote control towards this  
sensor  
LED lights up when the STANDBY  
mode is on  
POWER  
9 STOP  
– Stops playback  
To switch the DVD player to ON or  
OFF  
2;PLAY/PAUSE  
– Starts or pauses playback  
OPEN/CLOSE  
Opens or closes the disc tray  
Mains (AC Power Cord)  
– Connect to a standard AC outlet  
COAXIAL (Digital audio out)  
– Connect to coaxial AUDIO input of a  
digital audio equipment  
Audio Out (Left/Right)  
– Connect to AUDIO inputs of an  
amplifier, receiver or stereo system  
YPbPr (Component Video Out)  
CVBS (VIDEO Out)  
– Connect to CVBSVideo input of aTV  
Connect toYPbPr input of a TV  
Caution: Do not touch the inner pins of the jacks on the rear panel.  
Electrostatic discharge may cause permanent damage to the unit.  
12  
01-35_DVP4080_4050_93_98_Eng  
12  
21/09/06, 10:15 AM  
Functional Overview  
Remote Control  
B
DISC MENU  
– Enters or exits the disc contents  
menu  
Turns the player on or switches  
it to standby mode  
– Switches on or off the playback  
control mode (forVCD version  
2.0 only)  
DISPLAY  
Displays information on TV  
screen during playback  
RETURN / TITLE  
To go back to previous menu /  
show title menu  
1 2  
Cursor buttons for moving to  
the left or right, do a forward/  
reverse search  
PREV ( ¡ )  
– Skips to the previous title/chapter/  
track  
3 4  
Cursor buttons for moving up/  
down, do a slow forward/  
backward  
NEXT ( )  
– Skips to the next title/chapter/  
track  
OK  
Confirms an entry or selection  
STOP ( 9 )  
SETUP  
– Stops playback  
Enters or exits system setup  
menu.  
PLAY/PAUSE ( 2; )  
– Starts or pauses playback  
Alphanumeric keypad 0-9  
MUTE ( H)  
– Disables or enables sound output  
Selects numbered items in a  
menu  
AUDIO  
SUBTITLE  
– Selects a DVD subtitle language  
Selects an audio language  
(DVD/VCD) or audio channels.  
ZOOM  
– Enlarge a picture on the TV  
screen  
REPEAT  
– Selects various repeat mode  
REPEAT A-B  
– Repeats playback a specific section  
on a disc  
Tip:  
Press “STOP” for about 2 seconds to  
OPEN or CLOSE disc tray.  
13  
01-35_DVP4080_4050_93_98_Eng  
13  
20/09/06, 5:34 PM  
Getting Started  
Step 2: Setting up theTV  
Step 1: Inserting batteries into  
the Remote Control  
IMPORTANT!  
Make sure you have completed all  
the necessary connections. (See  
pages 9-10 ConnectingTV).  
1 Turn on theTV and set to the correct  
video-in channel. You should see the DVD  
background screen on theTV.  
2 Usually these channels are between the  
lowest and highest channels and may be  
called FRONT,A/V IN, orVIDEO. See your  
TV manual for more details.  
1 Open the battery compartment.  
Or, you may go to channel 1 on your  
TV, then press the Channel down button  
repeatedly until you see theVideo In  
channel.  
Or, theTV Remote Control may have a  
button or switch that chooses different  
video modes.  
2 Insert two batteries type R03 or AAA,  
following the indications (+-) inside  
the compartment.  
3 Close the cover.  
Using the Remote Control to  
operate the Player  
Or, set theTV to channel 3 or 4 if you  
are using an RF modulator.  
1 Aim the Remote Control  
directly at the remote  
sensor (IR) on the front  
panel.  
3 If you are using external equipment, (eg.  
audio system or receiver), turn it on and  
select the appropriate input source for  
the DVD player output. Refer to the  
equipment owner’s manual for detail.  
2 Do not put any objects  
between the Remote  
Control and the DVD  
Player while operating the  
DVD Player.  
CAUTION!  
Remove batteries if they are  
exhausted or if the Remote Control  
is not being used for a long time.  
Do not use old and new or  
different types of batteries in  
combination.  
Batteries contain chemical  
substances, so they should be  
disposed properly.  
14  
01-35_DVP4080_4050_93_98_Eng  
14  
20/09/06, 5:34 PM  
Getting Started  
Setting up Progressive Scan feature  
(for Progressive ScanTV only)  
ACTIVATING PROGRESSIVE SCAN:  
1. ENSURE YOUR TV HAS PROGRESSIVE SCAN.  
2. CONNECT USING YPBPR (GBR) VIDEO CABLE.  
3. IF THERE IS A DISTORTED PICTURE, WAIT  
15 SECONDS FOR AUTO RECOVERY.  
The progressive scan display twice the  
number of frames per seconds than  
interlaced scanning (ordinary normalTV  
system).With nearly double the number  
of lines, progressive scan offers higher  
picture resolution and quality.  
Cancel  
OK  
8 Press 1 to highlight  
in the menu  
OK  
and press OK to confirm.  
There will be a distorted picture on  
yourTV at this state until you turn  
on the progressive scan mode on  
yourTV.  
IMPORTANT!  
Before enabling the progressive scan  
feature, you must ensure:  
1)YourTV can accept progressive signals,  
a progressive scanTV is required.  
2)You have connected the DVD player to  
yourTV usingY Pb Pr (see page 9.)  
9 Turn on yourTV progressive scan mode  
(refer to yourTV user manual.)  
The below menu appears on theTV.  
1 Turn on yourTV.  
CONFIRM AGAIN TO USE PROGRESSIVE  
SCAN. IF THE PICTURE IS GOOD,  
PRESS OK BUTTON ON REMOTE.  
2 Turn off yourTV progressive scan mode  
or turn on interlaced mode (refer to your  
TV user manual.)  
Cancel  
OK  
3 Press POWER (B) on the remote  
control to turn on the DVD player.  
0 Press 1 to highlight  
and press OK to confirm.  
in the menu  
OK  
4 Select the correctVideo Input channel.  
(See page 14).  
The set up is complete now and you  
can start enjoy the high quality picture.  
The DVD background screen appears  
on theTV.  
To deactivate Progressive manually:  
G Wait for 15 seconds for auto recovery.  
OR  
5 Press SETUP.  
6 Press 2to select {VIDEO SETUP PAGE}.  
1 Press OPEN/CLOSE on the DVD player  
General  
Audio  
Video  
Preference  
to open the disc tray.  
- - Video Setup Page - -  
2 Press numeric keypad 1on the  
remote control for few seconds.  
The DVD background screen appears  
on theTV.  
TY Type  
TV Display  
Progressive  
Sharpness  
Brightness  
Contrast  
On  
Off  
Tip:  
Color  
There are some progressive scanTV and  
High-DefinitionTV sets that are not fully  
compatible with this DVD system, resulting in  
the unnatural picture when playing back a  
DVDVIDEO disc in the progressive scan  
mode. In such a case, turn off the  
7 Select {PROGRESSIVE} to {ON}, then OK  
to confirm.  
The instruction menu appears on the  
TV.  
progressive scan feature on both the DVD  
player and yourTV set.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
15  
01-35_DVP4080_4050_93_98_Eng  
15  
20/09/06, 5:35 PM  
Getting Started  
5 Select an item and press OK.  
Selecting the colour system that  
corresponds to yourTV  
Follow the instructions shown on the  
TV to confirm the selection (if any).  
This DVD Player is compatible with both  
NTSC and PAL. In order for a DVD disc  
to play on this Player, the colour system of  
the Disc, theTV and the DVD Player  
should match.  
Tips:  
Before changing the currentTV  
Standard setting, ensure that yourTV  
supports the ‘selectedTVType’ system.  
If there is no proper picture on  
yourTV, wait for 15 seconds for auto  
recovery.  
General  
Audio  
Video  
Preference  
- - Video Setup Page - -  
TY Type  
PAL  
TV Display  
Progressive  
Sharpness  
Brightness  
Contrast  
Multi  
CHANGING NTSC TO PAL:  
NTSC  
1. ENSURE THAT YOUR TV SUPPORTS  
PAL STANDARD.  
2. IF THERE IS A DISTORTED PICTURE  
DISPLAYED ON THE TV, WAIT 15 SECONDS  
FOR AUTO RECOVER.  
OK  
CANCEL  
Color  
CONFIRM AGAIN TO USE NEW TV TYPE SETTING.  
OK CANCEL  
1 Press SETUP.  
2 Press 2to select {VIDEO SETUP PAGE}.  
3 Press 3 4 to highlight {TVTYPE}, then  
To reset to defaultTV colour system  
manually:  
press 2.  
4 Press 3 4 to highlight one of the options  
G Wait for 15 seconds for auto recovery.  
below:  
OR  
PAL – Select this if the connectedTV is  
PAL system. It will change the video signal  
of a NTSC disc and output in PAL format.  
1 Press OPEN/CLOSE on the DVD player  
to open the disc tray.  
2 Press numeric keypad 3on the  
remote control for few seconds.  
The DVD background screen appears  
on theTV.  
NTSC – Select this if the connectedTV  
is NTSC system. It will change the video  
signal of a PAL disc and output in NTSC  
format.  
Multi – Select this if the connectedTV is  
compatible with both NTSC and PAL  
(multi-system). The output format will be  
in accordance with the video signal of the  
disc.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
16  
01-35_DVP4080_4050_93_98_Eng  
16  
20/09/06, 5:35 PM  
Getting Started  
Step 3: Setting language  
preference  
Setting the Audio, Subtitle and Disc  
menu language  
You can choose your own preferred  
language or soundtrack from audio,  
subtitles and disc menu languages. If the  
language selected is not available on the  
disc, the disc’s default language will be  
used instead.  
The language options are different  
depending on your country or region. It  
may not correspond to the illustrations  
shown on the user manual.  
Setting the OSD Language  
The On-screen language for the system  
menu will remain as you set it, regardless  
of various disc languages.  
General  
Audio  
Video  
Preference  
- - Preference Page - -  
Audio  
English  
Chinese  
French  
Subtitle  
Disc Menu  
Parental  
Password  
Default  
General  
Audio  
Video  
Preference  
Spanish  
Portuguese  
Polish  
- - General Setup Page - -  
OSD Language  
Sleep  
ENGLISH  
Melayu  
I
talian  
Turkish  
1 Press STOP twice then, press SETUP.  
2 Press 2to select {PREFERENCE PAGE}.  
3 Press 34to highlight one of the options  
below at a time, then press 2.  
– ‘Audio’ (disc’s soundtrack)  
– ‘Subtitle’ (disc’s subtitles)  
1 Press SETUP.  
2 Press 2to select {GENERAL SETUP  
PAGE}.  
– ‘Disc Menu’ (disc’s menu)  
3 Press 3 4 to highlight {OSD  
4 Press 34to select a language and press  
LANGUAGE}, then press 2.  
OK.  
4 Press 34to select a language and press  
If the language you want is not in the  
list, then select {OTHERS},  
OK.  
then use the numeric keypad (0-9) on  
the remote to enter the 4-digit language  
code ‘XXXX’ (see page 5 “Language  
Code”) and press OK.  
5 Repeat steps 3~4 for other language  
settings.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
17  
01-35_DVP4080_4050_93_98_Eng  
17  
20/09/06, 5:35 PM  
Disc Operations  
IMPORTANT!  
Region Codes  
If the inhibit icon (ø) appears on  
theTV screen when a button is  
pressed, it means the function is not  
available on the current disc or at  
the current time.  
Depending on the DVD orVIDEO  
CD, some operations may be  
different or restricted.  
This DVD player is designed to support  
the Region Management System. Check  
the regional code number on the disc  
package. If the number does not match  
the player’s region number (see table  
below), the player may be unable to  
playback the disc.  
Do not push on the disc tray or  
put any objects other than disc on  
the disc tray. Doing so may cause  
the disc player malfunction.  
Tips:  
It may not be possible to play CD-R/RW  
or DVD-R/RW in all cases due to the type of  
disc or condition of the recording.  
If you are having trouble playing a  
certain disc, remove the disc and try a  
different one. Improper formatted disc will  
not play on this DVD player.  
Playable Discs  
Your DVD Player will play:  
– DigitalVideo Discs (DVDs)  
– Video CDs (VCDs)  
– SuperVideo CDs (SVCDs)  
– DigitalVideo Discs +  
Recordable[Rewritable] (DVD+R[W])  
– Compact Discs (CDs)  
– MP3 discs, picture (Kodak, JPEG)  
files on CD-R(W).  
– JPEG/ISO 9660 format  
– Maximum 30 characters display.  
– Supported sampling frequencies :  
32 kHz, 44.1 kHz, 48 kHz (MPEG-1)  
16 kHz, 22.05 kHz, 24 kHz (MPEG-2)  
– Supported Bit-rates : 32~256 kbps  
(MPEG-1), 8~160 kbps (MPEG-2)  
variable bitrates  
Discs that can  
be played  
Region  
U.S.A. and  
(Example)  
ALL  
ALL  
ALL  
ALL  
1
2
Canada regions  
U.K and  
Europe regions  
Asia Pacific,Taiwan,  
Korea  
3
4
Australia, New  
Zealand, Latin America  
Russia and India regions  
ALL  
ALL  
5
6
– WMA files on CD-R(W).  
– Supported Bit-rates : 32~192 kbps  
China, Calcos Islands,  
Walls and Futuna Islands  
TIPS:  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
18  
01-35_DVP4080_4050_93_98_Eng  
18  
20/09/06, 5:35 PM  
Disc Operations  
Basic playback controls  
Playing discs  
Unless otherwise stated, all operations  
described are based on Remote Control  
use.  
1 Connect the power cords of the DVD  
Player andTV (and any optional stereo or  
AV receiver) to a power outlet.  
2 Turn on theTV power and set to the  
correctVideo In channel. (See page 14  
“Setting up theTV”).  
Pausing playback  
1 During playback, press PLAY/PAUSE 2;  
to pause playback and display a still  
picture.  
3 Press POWER button to turn on the  
DVD player front panel.  
Sound will be muted.  
The DVD background screen appears  
on theTV.  
2 Press 4to select the next picture frame.  
3 To resume normal playback, press  
4 Press OPEN/CLOSE button to open the  
top leader and load in a disc, then press  
the same button again to close the disc  
tray.  
PLAY/PAUSE 2;again.  
Selecting title/chapter/track/angle  
G Press PREV ¡/ NEXT to go to the  
G Make sure the label side is facing up.  
For double-sided discs, load the side you  
want to play facing up.  
previous or next track/chapter.  
G In STOP mode, press DISPLAY to  
display the disc information text line for  
title/chapter/track/angle.  
5 Playback will start automatically. If not  
press PLAY/PAUSE 2;.  
G Use alphanumeric keypad (0-9) to  
enter valid title/chapter/track/angle  
number, then press OK.  
If a disc menu appears on theTV, see  
page 21“Using the Disc Menu”.  
If the disc is locked by parental control,  
you must enter your six-digit password.  
(See page 31).  
The playback skips to the selected  
title/chapter/track/angle.  
G For more playback features, see pages 20-  
Stopping playback  
24.  
G Press STOPÇ.  
Tips:  
Screen saver will start automatically if  
the disc playback is stopped/paused for 5  
minutes.  
The player will automatically switch to  
Power Standby mode if you do not press any  
buttons for 15 minutes after the disc has  
stopped playing.  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
TIPS:  
19  
01-35_DVP4080_4050_93_98_Eng  
19  
20/09/06, 5:35 PM  
Disc Operations  
Selecting various repeat/shuffle  
functions  
Repeating a section within a  
chapter/track  
1 While playing a disc, press REPEAT A-B  
Repeat play mode  
at your chosen starting point.  
The repeat play options vary depending  
on the disc type.  
2 Press REPEAT A-B again at your chosen  
end point.  
The section A and B can be set only  
within the same chapter/track.  
The section will now repeat  
continuously.  
1 While playing a disc, press REPEAT  
continuously to choose a repeat options.  
For DVD  
– Chapter (currently playing chapter)  
– Title (currently playing title)  
– All (entire disc)  
3 To exit the sequence, press REPEAT  
A-B.  
– Off (cancel)  
ForVideo CD,Audio CD  
Track (currently playing track)  
– All (entire disc)  
– Off (cancel)  
For MP3  
– Repeat One (currently playing file)  
– Repeat Folder (all files in selected folder)  
– Folder (playing all files in one folder once)  
– Shuffle (all files in current folder at random  
playback)  
– Single (currently playing file once)  
For JPEG  
In STOP mode,  
– Repeat One (currently playing file)  
– Repeat Folder (all files in selected folder)  
– Folder (playing all files in one folder once)  
– Shuffle (all files in current folder at random  
playback)  
– Single (currently playing file once)  
In PLAY mode,  
– Repeat One (currently playing file)  
– Repeat All (playing all files in one disc)  
– Repeat Off (cancel)  
– Shuffle (all files in current folder at random  
playback)  
– Single (currently playing file once)  
2 To cancel repeat playback, press  
STOPÇ.  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
TIPS:  
20  
01-35_DVP4080_4050_93_98_Eng  
20  
20/09/06, 5:35 PM  
Disc Operations  
Slow Motion  
Operations for video playback  
(DVD/VCD/SVCD)  
1 Press 3during playback to select the  
required speed: 1/2, 1/4, 1/8 or 1/16  
(forward {DVD/SVCD/VCD}).  
Sound will be muted.  
Using the Disc Menu  
Depending on the disc, a menu may  
appear on theTV screen once you load in  
the disc.  
2 To return to normal speed, press  
PLAY/PAUSE 2;.  
To select a playback feature or item  
G Use 1234keys or numeric keypad  
(0-9) on the remote, then press OK to  
start playback.  
Forward / Reverse Searching  
1 Press 12during playback to select the  
required speed: 2X, 4X, 8X, 16X or 32X  
(backward or forward).  
To access or remove the menu  
Sound will be muted (DVD/VCD) or  
intermittent (CD).  
G Press DISC MENU on the remote.  
2 To return to normal speed, press PLAY/  
Zooming in  
PAUSE 2;.  
This function allows you to enlarge the  
picture on theTV screen and to pan  
through the enlarged picture.  
1 During playback, press ZOOM  
repeatedly to display the picture with  
different scales.  
Use 1234keys to pan through the  
enlarged picture.  
Playback will continue.  
2 Press ZOOM repeatedly to return to  
the original size.  
TIPS: The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
21  
01-35_DVP4080_4050_93_98_Eng  
21  
20/09/06, 5:35 PM  
Disc Operations  
For SuperVCD,VCD  
{Disc GoTo XX:XX}: enable to select  
any part within the disc.  
{Track GoTo XX:XX}: enable to select  
any part within the current track.  
{SelectTrack XX:TT}: enable to select  
any track.  
OSD (On-Screen Display)  
This function displays disc information on  
theTV screen during playback.  
1 During playback, press DISPLAY  
repeatedly.  
A list of available disc information  
appears on theTV screen.  
2 Use 12keys to select an option.  
3 Enter hours, minutes and seconds from  
left to right in the time edit box using  
remote control numerical key pad.  
Playback will change to the chosen  
time or to the selected title/chapter/  
track.  
For DVD  
{Title CT:TT Chapter XX/TC}: displays  
the total available title and chapters in the  
disc and enable to select a chapter for  
viewing.  
{Title CT:TTTime X:XX:XX}: displays  
the total available title in the disc and  
enable to select the hour, minute and  
second of the title.  
{Chapter CC:TCTime X:XX:XX}:  
displays the total available chapter in the  
disc and enable to select the hour, minute  
and second of the title.  
{Angle 1/2}: displays the total available  
angle in the disc and enable to select a  
valid number and playback will show the  
selected angle.  
TIPS: The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
22  
01-35_DVP4080_4050_93_98_Eng  
22  
20/09/06, 5:35 PM  
Disc Operations  
Special DVD Features  
Playing aTitle  
SpecialVCD & SVCD Features  
Playback Control (PBC)  
1 Press DISC MENU.  
The disc title menu appears on theTV  
screen.  
ForVCD with Playback Control (PBC)  
feature (version 2.0 only)  
G Press DISC MENU to toggle between  
‘PBC ON’ and ‘PBC OFF’.  
2 Use 3 4 1 2 keys or numeric keypad  
(0-9) to select a play option.  
If you select ‘PBC ON’, the disc menu  
(if available) will appear on theTV.  
Use the PREV ¡/ NEXT or the  
numeric keypad (0-9) to select a play  
option.  
3 Press OK key to confirm.  
Changing the Audio Language  
For DVD  
G During playback, pressing RETURN/  
TITLE will return to the menu screen (if  
PBC is on).  
G Press AUDIO repeatedly to select  
different audio languages.  
Changing the Audio Channel  
ForVCD  
If you want to skip the index menu  
and playback directly from the  
beginning,  
G Press AUDIO to select the available  
audio channels provided by the disc  
(MONO LEFT, MONO RIGHT, MIX-  
MONO, STEREO).  
G Press DISC MENU key on the remote  
control to switch to PBC off.  
Subtitles  
G Press SUBTITLE repeatedly to select  
different subtitle languages.  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
TIPS:  
23  
01-35_DVP4080_4050_93_98_Eng  
23  
20/09/06, 5:35 PM  
Disc Operations  
Playback selection  
Playing MP3/WMA/JPEG  
(Kodak) Picture CD  
During playback, you can;  
G Press PREV ¡/ NEXT to select the  
previous/next track/file in the current  
folder.  
IMPORTANT!  
You have to turn on yourTV and set to  
the correctVideo In channel. (See page  
14 “Setting up theTV”).  
G Press PLAY/PAUSE 2;repeatedly to  
pause/resume playback.  
G Load a Picture disc (Kodak Picture CD,  
JPEG).  
Repeat  
For Kodak disc, the slide show will  
begin.  
For JPEG disc, the picture menu  
appears on theTV screen. Press PLAY/  
PAUSE 2; to start the slide-show  
playback.  
G Press REPEAT continuously to access  
different ‘Play Mode’.  
REPEAT ONE:keep a JPEG image still on  
the screen or play an MP3 file repeatedly.  
REPEAT FOLDER: play all files in the  
selected folder repeatedly.  
FOLDER: play all files in the selected  
folder.  
General Operation  
SHUFFLE: play all files in the selected  
folder in random order.  
1 Load a disc.  
The data disc menu appears on theTV  
SINGLE: play the selected file once,  
then return to the menu.  
screen.  
2 Press 34 to select the folder and press  
OK to open the folder.  
Fast forward / reverse (MP3/WMA)  
00:00 04:52 128Kbps  
001/020  
G During playback, press 12to fast forward  
or reverse playback.  
Coco Lee  
G To resume normal playback, press PLAY/  
--  
PAUSE 2;.  
MP3  
Coco  
Coco  
-
-
Before  
I love  
MP3  
MP3 Coco  
MP3 Coco  
MP3 Coco  
-
-
-
Jazz  
Hot spring  
I believe  
3 Press 34or use the numeric keypad  
(0-9) to highlight an option.  
4 Press OK to confirm.  
Playback will start from the selected  
file to the end of the folder.  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
TIPS:  
24  
01-35_DVP4080_4050_93_98_Eng  
24  
20/09/06, 5:35 PM  
DVD Setup Menu Options  
This DVD Player setup is carried out via  
theTV, enabling you to customise the  
DVD Player to suit your particular  
requirements.  
OSD Language  
This menu contains various language  
options for display language on the screen.  
For details, see page 17.  
General Setup menu  
Sleep  
1 In disc mode, press SETUP.  
2 Press 1 2 to select ‘General Setup’.  
3 Press OK to confirm.  
Sleep function allows you to turn off the  
DVD Player automatically after a preset  
time.  
1 In ‘GENERAL SETUP PAGE’, press 3 4 to  
highlight {SLEEP}, then press 2.  
General  
Audio  
Video  
Preference  
15 Mins  
- - General Setup Page - -  
Turn off the DVD Player after 15 minutes.  
OSD Language  
Sleep  
30 Mins  
Turn off the DVD Player after 30 minutes.  
45 Mins  
Turn off the DVD Player after 45 minutes.  
60 Mins  
Turn off the DVD Player after 60 minutes.  
OFF  
Turn off the sleep function.  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
25  
01-35_DVP4080_4050_93_98_Eng  
25  
20/09/06, 5:35 PM  
DVD Setup Menu Options  
Digital Audio Setup  
Audio Setup Menu  
The options included in Digital Audio  
Setup are:‘Digital Output’ and ‘LPCM  
Output’.  
1 In disc mode, press SETUP.  
2 Press 1 2 to select ‘Audio Setup’.  
3 Press OK to confirm.  
1 In ‘AUDIO SETUP PAGE’, press 3 4 to  
highlight {DIGITAL AUDIO}, then press 2.  
General  
Audio  
Video  
Preference  
2 Press the 3 4 keys to highlight an option.  
- - Audio Setup Page - -  
3 Enter its submenu by pressing 2.  
Downmix  
4 Press 3 4 to select a setting, then press  
Digital Audio  
OK to confirm your selection.  
Digital Output  
Set the Digital output according to your  
optional audio equipment connection.  
SPDIF Off:Turn off the digital output.  
All: If you have connected your  
DIGITAL AUDIO OUT to a multi-channel  
decoder/receiver.  
PCM Only: Only if your receiver is  
not capable of decoding multi-channel  
audio.  
Setting the Downmix  
This options allows you to set the stereo  
analog output of your DVD Player.  
1 In ‘AUDIO SETUP PAGE’, press 3 4 to  
highlight {DOWNMIX}, then press 2.  
Tip:  
If DIGITAL OUTPUT is set to All, all  
STEREO  
audio settings except MUTE are invalid.  
Select this to change channel output to  
stereo which delivers sound from only the  
two front speakers.  
LPCM Output  
If you connect the DVD Player to a PCM  
compatible receiver via the digital  
terminals, such as coaxial or optical etc,  
you may need to adjust ‘LPCM’.  
LT/RT  
Select this option if your DVD Player is  
connected to a Dolby Pro-Logic decoder.  
Discs are recorded at a certain sampling  
rate.The higher the sampling rate, the  
better the sound quality.  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
48K: Playback a disc recorded at the  
sampling rate of 48kHz.  
96K: Playback a disc recorded at the  
sampling rate of 96kHz.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
26  
01-35_DVP4080_4050_93_98_Eng  
26  
20/09/06, 5:35 PM  
DVD Setup Menu Options  
Setting theTV Display  
Video Setup Menu  
Set the aspect ratio of the DVD Player  
according to theTV you have connected.  
The format you select must be available  
on the disc. If it is not, the setting forTV  
display will not affect the picture during  
playback.  
1 In disc mode, press SETUP.  
2 Press 1 2 to select ‘Video Setup’.  
3 Press OK to confirm.  
General  
Audio  
Video  
Preference  
1 In ‘VIDEO SETUP PAGE’, press 3 4 to  
- - Video Setup Page - -  
highlight {TV DISPLAY}, then press 2.  
TY Type  
TV Display  
Progressive  
Sharpness  
Brightness  
Contrast  
2 Press 3 4 to highlight one of the options  
below:  
4:3 PAN SCAN –  
Color  
Select this if you have  
a normalTV and want  
both sides of the  
picture to be trimmed or formatted to fit  
yourTV screen.  
TVType  
This menu contains the options for  
selecting the colour system that matches  
the connectedTV. For details, see page  
16.  
4:3 LETTER BOX –  
Select this if you have a  
normalTV. In this case, a  
wide picture with black  
bands on the upper and lower portions of  
theTV screen will  
be displayed.  
16:9 – Select this if  
you have a wide-  
screenTV.  
3 Select an item and press OK.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
27  
01-35_DVP4080_4050_93_98_Eng  
27  
20/09/06, 5:35 PM  
DVD Setup Menu Options  
Sharpness  
Progressive - turning on/off  
You can personalize your picture colour  
by adjusting sharpness.  
In the progressive scan mode, you can  
enjoy the high quality picture with less  
flickers. It only works when you have  
connected the DVD player’sY Pb Pr jacks  
to yourTV that supports the progressive  
video input. Otherwise, a distorted  
picture will appear on theTV. For proper  
progressive scan set up, see page 15.  
1 In ‘VIDEO SETUP PAGE’, press 3 4 to  
highlight {SHARPNESS}, then press 2.  
HIGH  
Choose high to make the picture’s edge  
sharper.  
1 In ‘VIDEO SETUP PAGE’, press 3 4 to  
MEDIUM  
Choose medium to get a standard  
highlight {PROGRESSIVE}, then press 2.  
picture.  
OFF  
To disable Progressive Scan function.  
LOW  
Choose low to make the picture’s edge  
softer.  
ON  
To enable Progressive Scan function.  
2 Press 3 4 to select a setting, then press  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
OK to confirm your selection.  
Follow the instructions shown on the  
TV to confirm the selection (if any).  
If a distorted picture appears on theTV  
screen, wait for 15 seconds for auto  
recovery.  
Brightness / Contrast / Color  
Increasing the value will brighten the  
picture or vice versa. Choose zero (0) for  
average setting.  
1 In ‘VIDEO SETUP PAGE’, press 3 4 to  
highlight {BRIGHTNESS}, {CONTRAST}  
or {COLOR}, then press 2.  
The menu appears.  
Brightness  
Contrast  
0
0
Color  
0
2 Press 1 2 to adjust the setting that best  
suit your personal preference.  
3 Press OK to confirm.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
28  
01-35_DVP4080_4050_93_98_Eng  
28  
20/09/06, 5:35 PM  
DVD Setup Menu Options  
Preference Page  
Restricting playback by Parental  
Control  
1 Press Ç twice to stop playback (if any),  
Some DVDs may have a parental level  
assigned to the complete disc or to  
certain scenes on the disc. This feature  
lets you set a playback limitation level.  
The rating levels are from 1 to 8 and are  
country dependent. You can prohibit the  
playing of certain discs that are not  
suitable for your children or have certain  
discs played with alternative scenes.  
then press SETUP.  
2 Press 1 2 to select thePreference Page’.  
3 Press OK to confirm.  
General  
Audio  
Video  
Preference  
- - Preference Page - -  
Audio  
1 In ‘PREFERENCE PAGE’, press 3 4 to  
Subtitle  
Disc Menu  
Parental  
Password  
Default  
highlight {PARENTAL}, then press 2.  
General  
Audio  
Video  
Preference  
- - Preference Page - -  
Audio  
1 KID SAFE  
2 G  
Subtitle  
Disc Menu  
Parental  
Password  
Default  
3 PG  
4 PG 13  
5 PGR  
6 R  
Audio, Subtitle, Disc Menu  
7 NC17  
8 ADULT  
These menus contain various language  
options for audio, subtitle and disc menu  
which may be recorded on the DVD. For  
details, see page 17.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
29  
01-35_DVP4080_4050_93_98_Eng  
29  
20/09/06, 5:35 PM  
DVD Setup Menu Options  
Rating explanations  
Restricting playback by Parental  
Control  
1 KID SAFE  
– Kids material; recommended especially for  
children and viewers of all ages.  
2 Press 3 4 to highlight a rating level for  
the disc inserted and press OK.  
To disable Parental controls and have  
all Discs play, select {8 ADULT}.  
2 G  
– General Audience; recommended as  
acceptable for viewers of all ages.  
3 Use the numeric keypad (0-9) to enter  
the six-digit password (see page 31  
“Changing the password”).  
3 PG  
– Parental Guidance suggested.  
DVDs that are rated above the level  
you selected will not play unless you enter  
your six-digit password.  
4 PG13  
– Material is unsuitable for children under age  
13.  
5-6 PG-R  
Tips:  
– Parental Guidance - Restricted;  
recommended that parents restrict children  
under 17 from viewing or allow to view only  
when supervised by a parent or adult guardian.  
VCD, SVCD, CD have no level indication,  
so parental control function has no effect on  
these type of discs.This applies to most illegal  
DVD discs.  
7 NC17  
– No children under age 17; not  
recommended viewing for children under age  
17.  
Some DVDs are not encoded with a  
rating though the movie rating may be  
printed on the Disc cover. The rating level  
feature does not work for such Discs.  
8 ADULT  
– Mature material; should be viewed only by  
adults due to graphic sexual material, violence  
or language.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
30  
01-35_DVP4080_4050_93_98_Eng  
30  
20/09/06, 5:35 PM  
DVD Setup Menu Options  
Changing the Password  
Restoring to original settings  
The same password is used for both  
Parental Control and Disc Lock. Enter  
your six-digit password when prompted  
on the screen. The default password is  
136900.  
Setting the DEFAULT function will reset  
all options and your personal settings to  
the factory defaults, except your  
password for Parental Control and Disc  
Lock.  
1 In ‘PREFERENCE PAGE’, press 3 4 to  
highlight {PASSWORD}, then press 2 to  
select {CHANGE}.  
1 In ‘PREFERENCE PAGE’, press 34 to  
highlight {DEFAULT}, then press 2 to  
select {RESET}.  
2 Press OK to confirm.  
All settings will now reset to factory  
defaults.  
General  
Audio  
Video  
Preference  
Old Password  
New Password  
Confirm PWD  
OK  
2 Use the numeric keypad (0-9) to enter  
your old six-digit password.  
When doing this for the first time, key  
in ‘136900’.  
If you forget your old six-digit  
password, key in ‘136900’.  
3 Enter the new six-digit password.  
4 Enter the new six-digit password a second  
time to confirm.  
The new six-digit password will now  
take effect.  
5 Press OK to confirm.  
TIPS: The underlined option is the factory default setting.  
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.  
31  
01-35_DVP4080_4050_93_98_Eng  
31  
20/09/06, 5:35 PM  
Troubleshooting  
WARNING  
Under no circumstances should you try to repair the system yourself, as this will  
invalidate the warranty. Do not open the system as there is a risk of electric shock.  
If a fault occurs, first check the points listed below before taking the system for repair. If  
you are unable to remedy a problem by following these hints, consult your dealer or  
Philips for help.  
Problem  
Solution  
No power  
– Check if the AC power cord is properly connected.  
– Press the STANDBY ON on the front of the DVD  
system to turn on the power.  
No picture  
– Refer to yourTV’s manual for correctVideo In  
channel selection. Change theTV channel until you  
see the DVD screen.  
– Check if theTV is switched on.  
– If the progressive scan feature is activated but the  
connectedTV does not support progressive signals  
or the cables are not connected accordingly, see  
page 15 for proper progressive scan set up or  
deactivate the progressive scan feature as below:  
1) Turn off yourTV progressive scan mode or turn on  
to interlaced mode.  
2) Press OPEN/CLOSE to open the disc tray.  
3) Press numeric keypad ‘1’ on the remote control for  
few seconds.  
Distorted picture  
– Sometimes a small amount of picture distortion may  
appear depending on the disc being played back.This  
is not a malfunction.  
Completely distorted picture or  
black/white picture with DVD  
– Connect DVD Player directly to theTV.  
– Make sure the disc is compatible with the DVD/  
Player.  
– Ensure that the DVD Player’sTVType is set to match  
that of the Disc and yourTV.  
No sound or distorted sound  
No audio at digital output  
– Adjust the volume.  
– Check that the speakers are connected correctly.  
– Check the digital connections.  
– Check if your receiver can decode MPEG-2 and if  
not, please make sure the digital output is set to  
PCM.  
– Check if the audio format of the selected audio  
language matches your receiver capabilities.  
32  
01-35_DVP4080_4050_93_98_Eng  
32  
20/09/06, 5:35 PM  
Troubleshooting  
Problem  
Solution  
Disc can’t be played  
– The DVD+R/CD-R must be finalised.  
– Ensure the disc label is facing up.  
– Check if the disc is defective by trying another disc.  
– If you have recorded a Picture CD or MP3 CD  
yourself, ensure that your disc contains at least 10  
pictures or 5 MP3 tracks.  
– Region code incorrect.  
Picture freezes momentarily  
during playback  
– Check the disc for fingerprints/scratches and  
clean with a soft cloth wiping from centre to edge.  
No return to start-up screen when  
disc is removed  
– Reset the unit by switching the player off, then on  
again.  
The player does not respond to  
the Remote Control  
– Aim the Remote Control directly at the sensor  
on the front of the player.  
– Reduce the distance to the player.  
– Replace the batteries in the Remote Control.  
– Re-insert the batteries with their polarities (+/–  
signs) as indicated.  
Buttons do not work  
To completely reset the player, unplug the AC  
cord from the AC outlet for 5-10 seconds.  
Player does not respond to some  
operating commands during playback.  
– Operations may not be permitted by the disc.  
Refer to the instructions of the disc jacket.  
DVD Player cannot read  
CDs/DVDs  
– Use a commonly available cleaning CD/DVD to  
clean the lens before sending the DVD Player for  
repair.  
Menu items cannot be selected  
– Press STOP twice before selecting System Menu.  
– Depending on the disc availability, some menu items  
cannot be selected.  
33  
01-35_DVP4080_4050_93_98_Eng  
33  
21/09/06, 10:15 AM  
Specifications  
AUDIO PERFORMANCE  
TV STANDARD (PAL/50Hz) (NTSC/60Hz)  
DA Converter  
DVD  
24 bit, 192 kHz  
Number of lines  
Playback  
625  
525  
fs 96 kHz  
fs 48 kHz  
fs 48 kHz  
fs 44.1kHz  
fs 44.1kHz  
4Hz- 44kHz  
4Hz- 22kHz  
4Hz- 22kHz  
4Hz- 20kHz  
4Hz- 20kHz  
> 90 dB  
Multistandard (PAL/NTSC)  
SVCD  
VIDEO PERFORMANCE  
Video DAC  
YPbPr  
Video Output  
12 bit, 108 MHz  
0.7Vpp — 75 ohm  
1Vpp — 75 ohm  
CD/VCD  
Signal-Noise (1kHz)  
Dynamic range(1kHz)  
Crosstalk (1kHz)  
> 80 dB  
> 70 dB  
Distortion/noise (1kHz)  
> 65 dB  
VIDEO FORMAT  
Digital Compression MPEG 2 for DVD,SVCD  
MPEG 1 forVCD  
MPEG MP3  
MPEG Audio L3  
CONNECTIONS  
YPbPr Output  
Cinch 3x  
DVD  
Horiz. resolution  
Vertical resolution  
50Hz  
720 pixels  
576 lines  
60Hz  
720 pixels  
480 lines  
Video Output  
Cinch (yellow)  
Audio Output(L+R) Cinch (white/red)  
Digital Output  
1 coaxial  
VCD  
Horiz. resolution  
Vertical resolution  
50Hz  
352 pixels  
288 lines  
60Hz  
352 pixels  
240 lines  
IEC60958 for CDDA / LPCM  
IEC61937 for MPEG 1/2,  
Dolby Digital  
AUDIO FORMAT  
CABINET  
Dimensions (w x h x d)  
Weight  
Digital  
MPEG/ AC-3/ compressed Digital  
226 x 48 x 209 mm  
Approximately 0.8 kg  
PCM  
16, 20, 24 bits  
fs, 44.1, 48, 96 kHz  
MP3(ISO 9660) 96, 112, 128, 256  
kbps & variable  
POWER CONSUMPTION  
Power Supply Rating  
bit rate fs, 32, 44.1,  
48 kHz  
110-240V;  
50/60Hz  
< 10W  
Analog Sound Stereo  
Dolby Surround compatible downmix from Dolby Digital  
multi-channel sound  
Power consumption  
Power consumption in Standby mode < 0.8W  
Specifications subject to change without prior notice  
34  
01-35_DVP4080_4050_93_98_Eng  
34  
20/09/06, 5:35 PM  
Glossary  
Analog: Sound that has not been turned into  
numbers. Analog sound varies, while digital sound has  
specific numerical values. These jacks send audio  
through two channels, the left and right.  
Multichannel: DVD is specified to have each sound  
track constitute one sound field. Multichannel refers  
to a structure of sound tracks having three or more  
channels.  
Aspect ratio: The ratio of vertical and horizontal  
sizes of a displayed image.The horizontal vs. vertical  
ratio of conventionalTVs. is 4:3, and that of wide-  
screens is 16:9.  
AUDIO OUT Jacks: Jacks on the back of the DVD  
System that send audio to another system (TV, Stereo,  
etc.).  
Bit Rate: The amount of data used to hold a given  
length of music; measured in kilobits per seconds, or  
kbps. Or, the speed at which you record. Generally,  
the higher the bit rate, or the higher the recording  
speed, the better the sound quality. However, higher  
bit rates use more space on a Disc.  
Chapter: Sections of a picture or a music piece on a  
DVD that are smaller than titles. A title is composed  
of several chapters. Each chapter is assigned a chapter  
number enabling you to locate the chapter you want.  
ComponentVideo Out Jacks: Jacks on the back of  
the DVD System that send high-quality video to aTV  
that has ComponentVideo In jacks (R/G/B, Y/Pb/Pr,  
etc.).  
Parental Control: A function of the DVD to limit  
playback of the disc by the age of the users according  
to the limitation level in each country. The limitation  
varies from disc to disc; when it is activated, playback  
will be prohibited if the softwares level is higher than  
the user-set level.  
PCM (Pulse Code Modulation): A system for  
converting analog sound signal to digital signal for  
later processing, with no data compression used in  
conversion.  
Playback control (PBC): Refers to the signal  
recorded on video CDs or SVCDs for controlling  
reproduction. By using menu screens recorded on a  
Video CD or SVCD that supports PBC, you can enjoy  
interactive-type software as well as software having a  
search function.  
Progressive Scan: It displays all the horizontal lines  
of a picture at one time, as a signal frame. This system  
can convert the interlaced video from DVD into  
progressive format for connection to a progressive  
display. It dramatically increases the vertical  
resolution.  
Disc menu: A screen display prepared for allowing  
selection of images, sounds, subtitles, multi-angles, etc  
recorded on a DVD.  
Digital: Sound that has been converted into  
numerical values. Digital sound is available when you  
use the DIGITAL AUDIO OUT COAXIAL or  
OPTICAL jacks.These jacks send audio through  
multiple channels, instead of just two channels as  
Region code: A system for allowing discs to be  
played back only in the region designated beforehand.  
This unit will only play discs that have compatible  
region codes. You can find the region code of your  
unit by looking on the product label. Some discs are  
compatible with more than one region (or ALL  
regions).  
Surround: A system for creating realistic three-  
dimensional sound fields full of realism by arranging  
multiple speakers around the listener.  
Title: The longest section of a picture or music  
feature on DVD, music, etc., in video software, or the  
entire album in audio software. Each title is assigned a  
title number enabling you to locate the title you want.  
VIDEO OUT jack: Jack on the back of the DVD  
System that sends video to aTV.  
analog does.  
Dolby Digital: A surround sound system developed  
by Dolby Laboratories containing up to six channels  
of digital audio (front left and right, surround left and  
right, center and subwoofer).  
JPEG: A very common digital still picture format.A  
still-picture data compression system proposed by the  
Joint Photographic Expert Group, which features small  
decrease in image quality in spite of its high  
compression ratio.  
MP3: A file format with a sound data compression  
system.MP3is the abbreviation of Motion Picture  
Experts Group 1 (or MPEG-1) Audio Layer 3. By using  
MP3 format. one CD-R or CD-RW can contain about  
10 times as much data volume as a regular CD can.  
35  
01-35_DVP4080_4050_93_98_Eng  
35  
20/09/06, 5:35 PM  

Intel I5 4670k Lga1150 3 40g BXF80646I54670K User Manual
JVC DR DV5000 User Manual
JVC INTERIART AV 32WFX1EU User Manual
Kawasaki 80C51 User Manual
KitchenAid KECC507GBL3 User Manual
LG Electronics W2600H User Manual
Palsonic 3410 User Manual
Philips 25CE6578 User Manual
Philips 107B5 User Manual
Philips Cordless Telephone M555 User Manual