Register your product and get support at
DVP3588K
EN User manual
3
MS-MY Manual pengguna
=+ꢀ+.ꢁ Ԛ͂ʹ˫ꢀ
21
ꢀ41
Copyright notice
1 Important
Safety and important notice
Warning
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
•
Risk of overheating! Never install the product in a confined
space. Always leave a space of at least 4 inches around the
product for ventilation. Ensure curtains or other objects
never cover the ventilation slots on the product.
Never place the product, remote control or batteries near
naked flames or other heat sources, including direct sunlight.
Avoid high temperature, moisture, water and dust.
This unit must not be exposed to dripping or splashing.
Never place any object or items that can damage this
unit (e.g., liquid filled objects, lighted candles).
Never place this product on other electrical equipment.
Keep away from this product during lightning storms.
Where the mains plug or an appliance coupler is used as
the disconnect device, the disconnect device shall remain
readily operable.
•
•
•
•
CLASS 1
LASER PRODUCT
•
•
•
•
Visible and invisible laser radiation when open. Avoid
exposure to beam.
Trademark notice
Manufactured under license under
U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,487,535 & other U.S. and worldwide
patents issued & pending. DTS and the Symbol are
registered trademarks & DTS Digital Surround and
the DTS logos are trademarks of DTS, Inc. Product
includes software. © DTS, Inc. All Rights Reserved.
About Progressive Scan
Consumers should note that not all high definition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the
picture. In case of 525 or 625 progressive scan
picture problems, it is recommended that the user
switch the connection to the ‘standard definition’
output. If there are questions regarding our TV set
compatibility with this model 525p and 625p DVD
player, please contact our customer service center.
Windows Media and the
Windows logo are trademarks, or registered
trademarks of Microsoft Corporation in the United
States and/or other countries.
Disposal of your old product and batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about the
local rules on the separate collection of electrical
and electronic products and batteries. The correct
disposal of these products helps prevent potentially
negative consequences on the environment and
human health.
‘DVD Video’ is a trademark of
DVD Format/Logo Licensing Corporation.
ABOUT DIVX VIDEO: DivX® is a
digital video format created by DivX, Inc. This is an
official DivX Certified device that plays DivX video.
software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to
play DivX Video-on-Demand (VOD) content. To
generate the registration code, locate the DivX
VOD section in the device setup menu. Go to vod.
divx.com with this code to complete the registration
process and learn more about DivX VOD.
Your product contains batteries, which cannot be
disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
information on a recycling center in your area.
4
EN
DivX® and DivX Ultra® are registered trademarks
of DivX, Inc., and are used under license.
•
Turn on the DVD player or switch to
standby mode.
b
c
d
Disc compartment
Display panel
Manufactured under license from
Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
(Open/Close)
•
•
•
Open or close the disc compartment.
e
f
g
(Play/Pause)
Start, pause or resume disc play.
The USB-IF Logos are trademarks of
Universal Serial Bus Implementers Forum, Inc.
(USB) jack
Connect a USB flash drive.
MIC
HDMI, and HDMI logo and
High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI licensing LLC.
•
Connect a microphone.
Remote control
2 Your DVD player
a
Congratulations on your purchase, and welcome to
Philips!To fully benefit from the support that Philips
welcome.
b
c
r
Playable media
This product can play:
d
•
DVD, DVD-Video, DVD+R/+RW,
DVD-R/-RW, DVD+R/-R DL (Dual Layer)
Video CD/SVCD
q
p
•
•
•
Audio CD, CD-R/CD-RW,
MP3 media, WMA media, WMV media,
DivX (Ultra) media, JPEG files
USB flash drive
e
•
f
g
Region codes
You can play discs with the following region codes.
o
n
DVD region code Countries
Asia Pacific, Taiwan, Korea
h
i
j
m
l
k
Product overview
Main Unit
DVD PLAYER DVP3588K
a
a
b
c
d efg
a
•
Turn on the unit or switch to standby.
(Standby-On)
EN
5
b
c
3 Connect
•
Open or close the disc compartment.
DISC MENU
Make the following connections to use this product.
•
•
•
Access or exit the disc menu.
Basic connections:
Switch to the disc mode.
•
•
Video
Audio
During the play of a photo slideshow,
switch between the Fun Mode and
Simple Mode.
Optional connections:
•
For VCD and SVCD, turn on or off PBC
(playback control).
•
Route audio to other devices:
•
•
Digital amplifier/receiver
Analog stereo system
d
•
•
Navigate the menus.
•
USB flash drive
Search fast-forward ( ) or fast-backward
(
).
Connect audio/video cables
•
Search slow-forward ( ) or slow-
backward ( ).
Select the best video connection that TV can support.
•
•
•
Option 1: Connect to the HDMI jack (for a
HDMI, DVI or HDCP-compliant TV).
Option 2: Connect to the component video
jacks (for a standard TV or Progressive Scan TV).
Option 3: Connect to the composite video
jack (for a standard TV).
e
f
BACK
•
•
Return to the previous display menu.
/
Skip to the previous or next title, chapter,
or track.
g
h
i
•
Switch to the USB mode.
Option 1: Connect to the HDMI jack
Numeric buttons
•
Select an item to play.
SUBTITLE
•
•
Select a subtitle language on a disc.
Access the menu of copying/deleting USB
audio files.
HDMI IN
j
k
ZOOM
HDMI OUT
•
•
Fit the picture display to the TV screen.
Zoom the picture in or out.
KOK RECORD
•
Record the voice and music during
karaoke into a USB flash drive.
1
Connect an HDMI cable (supplied) to:
•
•
the HDMI OUT jack on this product.
l
m
KARAOKE
the HDMI input jack on the TV.
•
Access or exit the Karaoke setup menu.
AUDIO/CREATE MP3
Note
•
Select an audio language or channel on
a disc.
•
If the device supports HDMI CEC, you can control
compliant devices with a single remote control (see “Get
started” > “Use Philips EasyLink”).
•
Access the menu of creating MP3 files.
n
o
p
•
•
Stop play.
Start, pause or resume disc play.
INFO
•
•
For discs, access the play options or
display the current disc status.
For slideshows, display a thumbnail view
of photo files.
q
r
OK
•
Confirm an entry or selection.
SETUP
•
Access or exit the setup menu.
6
EN
Option 2: Connect to the component
video jacks
Connect multi channel receiver
Y
Pb
Pr
Pb
Y
Pr
COMPONENT VIDEO OUT
FRONT
FRONT
L
REAR
REAR
L
CENTER
1
2
Connect the component video cables
(not supplied) to:
R
R
SUBWOOFER
MULTICHANNEL
AUDIO IN
•
•
the Y Pb Pr jacks on this product.
the COMPONENT VIDEO input jacks
on the TV.
1
Connect the audio cables (not supplied) to:
•
the AUDIO OUT (FRONT L/R, REAR
L/R, CENTER and SUBWOOFER) jacks
on this product.
Connect the audio cables (supplied) to:
•
the AUDIO OUT FRONT L/R jacks on
this product.
the audio input jacks on the TV.
•
the audio input jacks on the device.
•
Connect to digital amplifier/receiver
Option 3: Connect to the video
(CVBS) jack
DIGITAL IN
DIGITAL
OUT
COAXIAL
1
Connect a coaxial cable (not supplied) to:
•
•
the COAXIAL jack on this product.
the COAXIAL/DIGITAL input jack on
the device.
Connect analogue stereo system
1
2
Connect a composite video cable (supplied) to:
AUDIO IN
•
•
the TV OUT jack on this product.
the video input jack on the TV.
Connect the audio cables (supplied) to:
FRONT L
FRONT R
•
the AUDIO OUT FRONT L/R jacks on
this product.
the audio input jacks on the TV.
•
Optional audio connections
Connect the audio from this product to other devices
to enhance sound.
1
Connect the audio cables (supplied) to:
•
the AUDIO OUT FRONT L/R jacks on
this product.
•
the audio input jacks on the TV.
EN
7
Connect USB flash drive
Note
DVD PLAYER DVP3588K
•
If you are not going to use the remote control for a long
time, remove the batteries.
Do not mix batteries (old and new or carbon and alkaline, etc.).
Batteries contain chemical substances, so they should be
disposed of properly.
•
•
Find theTV input channel
1
Connect a USB flash drive to the
this product.
jack on
1
2
Press to turn on this product.
Turn on the TV and switch to the video input
channel (refer to the TV user manual on how
to select the A/V input channel).
Note
•
This product can only play/view MP3, WMA, WMV, DivX
(Ultra) or JPEG files that are stored on a USB flash drive.
Select menu display language
•
Press the
button to access the content and play the files.
Note
Connect power
•
If this product is connected to a HDMI CEC compliant
TV, skip this setting. It switches automatically to the
same OSD menu language as per your TV setting (if the
language set on TV is supported by this product).
Caution
•
•
Risk of product damage! Ensure that the power supply voltage
corresponds to the voltage printed on the back of the unit.
Before connecting the AC power cord, ensure you have
completed all other connections.
Note
•
The type plate is located on the back of the product.
Connect the AC power cable to:
1
•
this product.
•
the wall socket.
This product is ready to be set up for use.
»
1
Press SETUP.
»
[General Setup] menu is displayed.
4 Get started
2
3
Select [OSD Language], and then press
.
Press
OK.
to select a language, and then press
Prepare the remote control
1
2
3
Press and push the battery compartment to
slide it open (see “1” in the illustration).
Turn on progressive scan
Insert two AAA batteries with correct
polarity (+/-) as indicated.
Push and slide back the battery compartment
(see “3” in the illustration).
Note
•
To use the progressive scan feature, you must connect a
progressive scan TV with the component video jacks (see
“Connect” > “Connect audio/video cables” > “Option 2:
Connect to the component video jacks” for details).
8
EN
One-touch play
1
Press to turn on this product.
»
TheTV (if supports one-touch play)
automatically turns on and switches to the
correct video-in channel.
»
If a disc is loaded in this product, disc play
automatically starts.
One-touch standby
1
Press and hold on the remote control for
more than 3 seconds.
»
All the connected devices (if the device
supports one-touch standby) automatically
switch to standby.
1
Turn on the TV to the correct viewing channel
for this product.
2
3
4
Press SETUP.
Press to select [Video Setup].
Select [Progressive] > [On], and then press OK.
Note
»
A warning message is displayed.
•
Philips does not guarantee 100% interoperability with all
HDMI CEC devices.
5
To proceed, select [Ok] and then press OK.
The progressive setup is complete.
»
Note
5 Play
Play a disc
Caution
•
If a blank/distorted screen is displayed, wait for
15 seconds for the auto recovery.
•
If no picture is displayed, turn off the progressive scan
mode as follows:
1) Press to open the disc compartment.
2) Press the Numeric button ‘1’.
•
•
Do not place any objects other than discs into the disc
6
Press SETUP to exit the menu.
You can now turn on the progressive scan
mode on the TV (see the TV user manual).
compartment.
Do not touch the disc optical lens inside the disc compartment.
7
1
Press to open the disc compartment.
Insert a disc with its label facing up.
Press to close the disc compartment and
start disc play.
2
3
Note
•
During play, when the progressive scan mode is on for
both this product and the TV, distorted picture may
display. In this case, turn off the progressive scan feature
on both this product and the TV.
Note
•
Check the types of discs supported (see “Your DVD
player” > “Playable media”).
If the password entry menu is displayed, enter the password
before you can play the locked or restricted disc (see
“Adjust settings” > “Preferences” > [Parental Control]).
Use Philips EasyLink
•
This product supports Philips EasyLink which uses the
HDMI CEC (Consumer Electronics Control) protocol.
You can use one single remote control to control
EasyLink-compliant devices that are connected
through HDMI connectors.
Play video
Note
Note
•
To enable the EasyLink feature, you must turn on the HDMI
CEC operations on the TV and on other devices connected
to TV. Refer to the TVs/devices manual for details.
•
Some operations may not work with some discs. See the
information accompanying the disc for details.
EN
9
Control video play
1
2
Display the contents menu via one of the
following ways:
1
Play a title.
•
•
If PBC is on, load in a VCD/SVCD.
During play with PBC on, press
2
Use the remote control to control the play.
BACK.
Press the Numeric buttons to select a play
Button
Action
option, and then press OK to start play.
•
If PBC is turned off, it skips the menu
display and starts play from the first track.
Start, pause or resume disc play.
Stop disc play.
Skip to a previous/next title or chapter.
,
,
Preview disc contents
Search fast-backward or fast-
forward. Press repeatedly to change
the search speed.
Search slow-forward or slow-
backward. Press repeatedly to
change the search speed.
For VCD/SVCD, slow-backward
search is not available.
,
1
During play, press
The disc status menu is displayed.
Select [Preview], and then press
INFO.
»
2
3
.
Select a preview option, and then press OK.
»
A thumbnails preview screen is displayed.
•
To go to the next/previous preview screen,
select [Prev] or [Next], and then press OK.
To start play, press OK at the selected
thumbnail picture.
•
AUDIO/
CREATE
MP3
Select an audio language or channel
available on a disc.
Skip play to a specific time
SUBTITLE Select a subtitle language available
1
During play, press
The disc status menu is displayed.
Select an option for the current elapsed
INFO.
on a disc.
»
Fit the picture format to the TV
ZOOM
2
screen.
(Screen fit)
playing time, and then press
.
Press repeatedly until the image is
scaled to fit to the TV screen.
•
•
•
•
[TT Time] (title time)
[CH Time] (chapter time)
[Disc Time]
Toggle between screen aspect ratio
and different zoom factor.
ZOOM
[Track Time]
Press the Numeric buttons to enter the time
3
To pan through the zoomed image,
to skip to, then press OK.
press the Navigation buttons.
Access the play options and display
the current disc status.
INFO
Display play time
1
2
3
During play, press
The disc status menu is displayed.
Select [Time Disp.], and then press
The display options vary from disc type.
Select an option, and then press OK.
INFO.
»
Access DVD menu
.
»
1
Press DISC MENU to access the disc root
menu.
2
Select a play option, then press OK.
View DVD play from different angles
•
In some menus, press the Numeric
buttons to input your selection.
1
During play, press
The disc status menu is displayed.
Select [Angle], and then press
Press the Numeric buttons to change the angle.
Play changes to the selected angle.
INFO.
»
AccessVCD menu
2
3
.
The PBC (playback control) feature is available for
VCD/SVCD, which can display the contents menu
for you to select a play option. The PBC is on by
default in the factory.
»
Note
•
Applicable only to discs that contain multi-angle scenes.
Note
•
See “Adjust settings” > [Preferences] > [PBC] on how
to turn PBC on or off.
10 EN
Repeat play for a specific section
Quick skip play
1
2
3
4
During play, press
INFO.
1
During play, press
select an option.
INFO repeatedly to
Press to select [REPEAT AB].
Press OK to set the start point.
Press OK to set the end point.
Display
Action
Skip play to a specific time
within the disc.
Skip play to a specific time
within a track.
Skip play to a specific track
number.
[Disc Go To]
[Track Go To]
[Select Track]
»
»
Repeat play starts.
To cancel repeat play, press OK again.
Note
•
The marked section for repeat play is only possible
within a track/title.
2
Press the numeric buttons to change the time/
number to skip to.
Play DivX® (Ultra) video
DivX® (Ultra) video is a digital media format
that retains high quality despite a high rate of
compression. You can enjoy DivX® (Ultra) video on
this DivX (Ultra) certified product.
Play MP3/WMA music
MP3/WMA is a type of highly compressed audio file
(files with .mp3, .wma extensions).
1
2
Insert a disc or USB that contains the MP3/
WMA music.
1
Insert a disc or USB flash drive that contains
the DivX (Ultra) videos.
•
»
For USB, press
.
•
For USB, press
.
A contents menu is displayed.
»
A contents menu is displayed.
If play does not automatically start, select a
track to play.
2
Select a title to play, then press OK.
You may select subtitle/audio language.
•
•
To select another track/folder, press
,
then press OK.
Note
Repeat play for a specific section
•
You can only play DivX (Ultra) video that is rented
or purchased with the DivX registration code of this
product (see “Adjust Settings” > [General Setup] >
[DivX(R) VOD Code]).
For audio CDs,
1
During play, press
[Off] is displayed.
INFO repeatedly until
2
Press
to select a repeat option.
For MP3/WMA files,
Play music
Control a track
1
During play, press
INFO repeatedly to
select a repeat option.
1
Play a track.
Use the remote control to control the play.
Note
2
•
For disc recorded in multiple sessions, only the first
session is played.
Button
Action
•
For a WMA file that is protected by Digital Rights
Management (DRM), it cannot be played on this product.
This product does not support MP3PRO audio format.
For any special character that is present in the MP3 track
name (ID3) or album name, it might not be displayed
correctly on the screen because these characters are not
supported.
Start, pause or resume disc play.
Stop disc play.
Skip to a previous/next track.
Select an item to play.
•
•
,
•
Folders/files that exceed the supported limit of this
product cannot be displayed or played.
Searches fast-backward or fast-
forward. Press repeatedly to
change the search speed.
,
EN 11
Play musical slideshow
Create a musical slideshow to play MP3/WMA music
files and JPEG photo files simultaneously.
Play photo
Play photo as slideshow
You can play JPEG photos (files with .jpeg or .jpg
e1xtensions).
Insert a disc or USB flash drive that contains
Note
the JPEG photos.
•
To create a musical slideshow, you must store the MP3/
WMA and JPEG files on the same disc/USB flash drive.
•
For USB, press
.
»
Slideshow begins (for Kodak disc), or a
contents menu (for JPEG disc) is displayed.
1
Play MP3/WMA music.
2
Select a photo, and then press OK to start
2
3
Press
BACK to return to the main menu.
slideshow.
Navigate to the photo folder/album and press
»
For a photo recorded with the “exif”
format, the display orientation is
automatically optimized.
OK to start slideshow play.
»
Slideshow begins and continues till the end
of the photo folder or album.
•
•
To display photos in color (Fun Mode) or in
black and white (Simple Mode), press DISC
MENU.
»
Audio continues to play until the end of
the disc.
To preview the photos in thumbnail, press
INFO.
•
•
To stop slideshow play, press
To stop music play, press again.
.
•
•
•
To select a photo, press the Navigation
buttons.
Play from a USB flash drive
To enlarge the selected photo and start
slideshow, press OK.
To return to the menu, press
BACK.
Note
•
This product plays/views MP3, WMA, WMV, DivX
(Ultra) or JPEG files that are stored on a USB flash drive.
Note
•
It may require longer time to display the disc content
on the TV due to the large number of songs/photos
compiled onto one disc/USB flash drive.
1
Connect a USB flash drive to the
this product.
jack on
•
•
If the JPEG photo is not recorded with an ‘exif’ type file, the
actual thumbnail picture cannot be shown on the screen. It
is replaced by a ‘blue mountain’ thumbnail picture.
This product can only display digital camera pictures
according to the JPEG-EXIF format, typically used by
almost all digital cameras. It cannot display Motion JPEG,
or pictures in formats other than JPEG, or sound clips
associated with pictures.
2
3
Press the
button.
»
A contents menu is displayed.
If play does not start automatically, select a file
to play.
•
For more information, see the chapters
“Play music”, “Play photo” and “Play
video” for details.
•
Folders/files that exceed the supported limit of this
product cannot be displayed or played.
4
To stop play, press
.
•
To switch to the disc mode, press the
button.
Control photo play
1
Play a photo slideshow.
Use the remote control to control the play.
2
6 Advanced features
Media copy
You can copy files (such as MP3,WMA or JPEG) from
disc to a USB flash drive.
Button
/
Action
Rotate a photo anti-clockwise/
clockwise.
Rotate a photo horizontally/vertically.
Zoom in or out of a photo.
Play pauses in zoom mode.
Stop a play.
/
ZOOM
1
2
Insert a disc that contains the MP3/WMA/
JPEG files.
In the stop mode, connect the USB flash drive
to the
jack on this product.
3
4
Select a file to copy, then press SUBTITLE.
Select [Yes] in the menu, then press OK.
12 EN
Option
[Speed]
[Bitrate]
Description
Select a copying speed.
Select a quality level.
Higher bitrate for better sound
quality and bigger file size.
Copy track information into the
MP3 file.
The created files can only be saved
in a USB flash drive.
00:00/00:00
\MP3
005/030
Previous
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Do you want
to copy this file
[CRT ID3]
[Device]
Yes
No
6
7
Press to access the [TRACK] panel.
Select an audio track, and then press OK.
•
•
To select another track, repeat step 7.
To select all tracks, select [Select all] in
the menu, and press OK.
»
Once complete, a new folder is created
automatically in the USB flash drive to store
all the new files.
•
To deselect all tracks, select [Deselect
all] in the menu, and press OK.
5
To stop copy progress, press , then press OK.
8
Select [Start] in the menu, and then press OK
to start to convert.
Note
»
Once complete, a new folder is created
automatically in the USB flash drive to store
all the new MP3 files.
•
When you copy, never press any button.
Copy-protected media cannot be copied.
•
•
To exit the menu, select [Exit], and then
press OK.
Create MP3 files
With this product, you can convert audio CDs into
MP3 audio files.The created MP3 audio files are saved
in the USB flash drive.
Note
•
When you convert, never press any button.
•
•
DTS CDs and copy-protected CDs cannot be converted.
Writer-protected or password-protected USB flash
drives cannot be used to store MP3 files.
1
Insert an audio CD.
Connect a USB flash drive to the
this product.
2
jack on
3
4
During disc play, press AUDIO/CREATE MP3.
The MP3 creation menu is displayed.
Select [Yes] in the menu, and then press OK.
Karaoke
»
You can connect a microphone (not supplied) to sing
along with a music source.
Create MP3
Note
TRACK
Track01
OPTIONS
04:14
04:17
03:58
04:51
03:53
04:09
04:38
Speed
Normal
128kbps
Yes
•
Before you connect a microphone, set the microphone
volume to the minimum to prevent howling.
Track02
Track03
Track04
Track05
Track06
Track07
Bitrate
CRT ID3
Device
1
Turn on the TV, and select the TV input channel.
USB 1
2
3
4
Connect a microphone to the MIC jack on this
SUMMARY
product.
Press [OK] button
to change speed.
Turn on the microphone sound output
(see “Adjust Karaoke settings”).
Play a Karaoke disc and sing through the
microphone.
Select all
Start
Exit
Deselect all
5
Select a conversion option in the [OPTIONS]
panel, and then press OK repeatedly to select
an item.
EN 13
[Start at current time] - start recording
immediately.
Adjust Karaoke settings
[Start from beginning] - start recording from
the beginning of the current song.
Note
•
To exit without recording, press again
KOK RECORD.
•
You need to turn on the microphone sound output in
the [Microphone] option to activate karaoke-related
menu options.
2
Press
to select an option, and press OK.
»
»
»
The recording begins, and a recording
progress bar is displayed.
1
Press KARAOKE.
»
The karaoke settings menu is displayed.
When the current song ends, the recording
completes and stops.
2
3
4
Select an option, and then press OK.
Change or set a setting, and then press OK.
Press KARAOKE again to exit the menu.
During recording, you may press
KOK RECORD and follow the on-
screen instructions to stop the recording.
[Microphone] - Turn on or off the microphone
sound output.
[MIC Volume] - Adjust the microphone volume.
[Echo] – Adjust the echo level.
7 Adjust settings
[Karaoke Scoring] – Turn off the function of
Karaoke scoring or select a scoring level (basic/
intermediate/advance). If a level is selected, the
score is displayed after each song ends.
[Karaoke Idol] – Song contest among 4 singers.
Note
•
If the setup option is grayed out, it means the setting
cannot be changed at the current state.
1) In the [Karaoke Scoring] option, select a level
(basic/intermediate/advance).
2) In the [Karaoke Idol] option, turn on the
contest.
General setup
»
The song selection menu is displayed.
3) Input a track (VCD/SVCD) or a title/chapter
(DVD) as the first song. Up to 4 songs can be
selected.
4) Then select [Start], and press OK to start play
selected songs.
»
After all the selected songs end, a contest
result is displayed.
[Key Shift] – Adjust the pitch level that matches
your voice.
[Vocal] – Select various Karaoke audio modes, or
turn off original vocal.
1
Press SETUP.
»
[General Setup] menu is displayed.
Record Karaoke
2
3
4
Press
.
You can record your singing into a USB flash drive.
Each time you can record one song, and all the
recorded songs are saved in .mp3 format.
At the first time when you record to a USB flash
drive, a folder named “PHILIPS” is automatically
created to save the recorded files.
Select an option, and then press OK.
Select a setting, and then press OK.
•
•
To return to the previous menu, press
To exit the menu, press SETUP.
.
[Disc Lock]
Set the play restriction for a disc which is loaded in the
disc compartment (maximum 20 discs can be locked).
•
[Lock] - Restrict the access to the current
disc. At the next time when you want to play
this disc or unlock it, you need to enter the
password.
Note
•
This product supports recording to MAS USB devices
(MTP/NAS devices are excluded).
•
[Unlock] - Play all discs.
1
During Karaoke, press KOK RECORD to
[OSD Language]
display the record menu:
Select a language for on-screen menu.
14 EN
[Sleep Timer]
[Digital Audio]
Switch automatically to standby at the preset time.
Select a digital setting based on the digital amplifier/
receiver that is connected through the digital jack
(coaxial/digital).
•
•
[Off] - Disable sleep mode.
[15 Mins], [30 Mins], [45 Mins], [60 Mins] -
Select the countdown time for this product to
switch to standby.
•
[Digital Output] - Select a type of digital
output.
[Auto Standby]
•
[All] - Support multi-channel audio
formats.
Turn on/off the auto standby mode.
•
[On] - Switch to standby after 15 minutes of
inactivity (for example, in pause or stop mode).
[Off] - Disable the auto standby mode.
•
•
[Off] - Disable digital output.
[PCM Only] - Downmix to two-channel
audio format.
•
[DivX(R) VOD Code]
•
[LPCM Output] - Select the LPCM (Linear
Display the DivX® registration code and
deregistration code.
Pulse Code Modulation) output sampling rate.
•
•
[48kHZ] - For discs recorded at sampling
rate of 48 kHz.
•
[Registration] - Obtain a registration code to
register this product on website.
[Deregistration] - Obtain a deregistration
code to cancel the registration of this product
on website.
[96kHZ] - For discs recorded at sampling
rate of 96 kHz.
•
Note
•
•
[LPCM Output] setting is only available if the [Digital
Output] is set to [PCM Only].
Note
The higher the sampling rate, the better the sound
quality.
•
Use this product’s DivX registration code when you rent
videos rented or purchased through the DivX® VOD
(Video On Demand) service can be played only on the
device to which it is registered.
[HDMI Audio]
Select the HDMI audio setting when you connect
this product and the TV with an HDMI cable.
•
[On] - Allow audio output through the TV and
the speaker system. If the audio format on the
disc is not supported, it will be downmixed to
two-channel sound (linear-PCM).
[Off] - Disable the audio output from HDMI
devices connected to this player.
Audio setup
•
[Audio Sync]
Set the delay time for audio output when you play
a video disc.
1. Press OK.
2. Press
to set the delay time.
3. Press OK to confirm and exit.
[Volume]
1
Press SETUP.
Set the default volume level when you play a disc.
»
[General Setup] menu is displayed.
2
3
4
Press to select [Audio Setup], and then press
Select an option, and then press OK.
Select a setting, and then press OK.
.
1. Press OK.
2. Press
to set the volume.
3. Press OK to confirm and exit.
•
•
To return to the previous menu, press
.
[Sound Mode]
To exit the menu, press SETUP.
Select a preset sound effect to enhance the audio
output.
[Analogue Output]
Select an analogue setting based on the audio
device that is connected through the analogue
audio jack.
•
[3D] - Select a virtual surround sound effect
that is produced from the left and right audio
channels.
[Movie Mode] - Select a sound effect for movies.
[Music Mode] - Select a sound effect for music.
•
[LT/RT] - For the surround sound output
through two speakers.
[Stereo] - For the stereo output.
[Multi Channel] - For multi-channel output.
•
•
•
•
EN 15
[Speaker Setup]
Optimize the surround output for the connected
speakers.
[CD Upsampling]
For better sound quality in stereo mode, convert
the music CD to a higher sampling rate.
•
•
[Off] - Turn off CD-upsampling.
[88.2kHz] - Convert to twice the original
sampling rate.
•
•
[4:3 Pan Scan] - For a 4:3 screen TV: full-height
display with the trimmed sides.
[4:3 Letter Box] - For a 4:3 screen TV: wide-
screen display with black bars on the top and
bottom of the screen.
•
[176.4kHz] - Convert to four times the original
sampling rate.
[Night Mode]
•
[16:9] - For a wide-screen TV: display ratio 16:9.
Make loud sound level softer and soft sound level
louder so that you can watch the DVD movies at a
low volume, without disturbing others.
[Progressive]
If a progressive scan TV is connected to this
product, turn on the progressive scan mode.
•
•
[On] - Enjoy quiet viewing at night.
[Off] - Enjoy surround sound with a full
dynamic range.
•
•
[On] - Turn on progressive scan.
[Off] - Turn off progressive scan mode.
Note
Note
•
For more detailed description, see “Get started” >
“Turn on progressive scan”.
•
Applicable only to Dolby Digital encoded DVDs.
[Picture Setting]
Select a predefined set of picture color settings or
customize the personal setting.
Video setup
•
•
•
•
[Standard] - Original color setting.
[Bright] - Vibrant color setting.
[Soft] - Warm color setting.
[Personal] - Customize the color setting. Set
the level of brightness, contrast, tint and color
saturation, then press OK.
[My Wallpaper]
Select a picture as the wallpaper.
•
•
•
[Default picture] - The default wallpaper
preset as the Philips logo.
[Saved picture] - A captured video image or
JPEG photo.
1
2
Press SETUP.
[Current picture] - Capture a video image or
JPEG photo and save it on the product.
»
[General Setup] menu is displayed.
Press to select [Video Setup], and then
1. Play a video or photo slideshow.
2. Select a video image or photo: press
pause, and then press SETUP.
press
.
to
3
4
Select an option, and then press OK.
Select a setting, and then press OK.
3. Navigate to the option ([Video Setup] >
[My Wallpaper] > [Current picture]).
4. Press OK to confirm.
•
•
To return to the previous menu, press
To exit the menu, press SETUP.
.
[TV System]
»
One video image or JPEG photo is saved as
wallpaper.
Change this setting if the video does not appear
correctly. By default, this setting matches the most
common setting for TVs in your country.
»
A newly saved image or photo replaces the
earlier one.
•
•
[PAL] - For a PAL-system TV.
[Multi] - For TV that is compatible with both
PAL and NTSC.
[HD JPEG]
Enjoy untouched and uncompressed JPEG pictures
at its original resolution when you connect this
product and the TV with an HDMI cable.
•
[NTSC] - For an NTSC-system TV.
[TV Display]
Select a display format:
•
•
[On] - Display high definition picture.
[Off] - Display standard picture.
16 EN
[HDMI Setup]
Preferences
When you connect this proudct and the TV with an
HDMI cable, select the best HDMI setup that the
TV can support.
Note
•
[Resolution] - Select a video resolution that is
compatible with the TV display capability.
•
Stop disc play before you can access to [Preferences].
•
•
[Auto] - Detect and select the best
supported video resolution automatically.
[480i],[480p], [576i], [576p],[720p],
[1080i], [1080p] - Select a video
Preferences
resolution that is best supported by the
TV. See the TV manual for details.
Audio
Subtitle
Disc Menu
Parental Control
PBC
Mp3/Jpeg Nav
Password
DivX Subtitle
•
[Wide Screen Format] - Define the wide
screen format for disc play.
•
•
•
[Super Wide] - Center position of
the screen is stretched less than the
side (applicable only when the video
resolution is set to 720p, 1080i or
1080p).
[4:3 Pillar Box] - No stretching of
picture. Black bars are displayed on both
sides of the screen (applicable only when
the video resolution is set to 720p, 1080i
or 1080p).
[Off] - Picture is displayed according to
the disc format.
1
Press SETUP.
»
[General Setup] menu is displayed.
2
Press to select [Preferences], and then
press
.
3
4
Select an option, and then press OK.
•
[EasyLink Setup] - If this product is connected
to HDMI CEC compliant TV/devices, all
connected devices can respond to the
following commands simultaneously.
Select a setting, and then press OK.
•
•
To return to the previous menu, press
To exit the menu, press SETUP.
.
[Audio]
•
[EasyLink] - Turn on/off all EasyLink
features.
Select an audio language for disc play.
[Subtitle]
•
[One Touch Play] - Turn on or off the
feature of one-touch play.
Select a subtitle language for disc play.
[Disc Menu]
When EasyLink is enabled, press
»
»
.
Select a disc menu language.
This product turns on.
TheTV (if theTV supports one-touch
play) automatically turns on and
switches to the video-in channel.
Disc play starts if there is a disc in this
product.
Note
•
•
•
If the language you have set is not available on the disc,
the disc uses its own default language.
»
For some DVDs, the subtitle/audio language can only
change from the disc menu.
•
[One Touch Standby] - Turn on or off
To select the languages that are not listed in the menu,
select [Others]. Then check the Language Code list at
the back of this user manual and enter the respective
language code.
the feature of one-touch standby.
When EasyLink is enabled, press and
hold for at least three seconds.
»
All connected HDMI CEC compliant
devices switch to standby mode.
[Parental Control]
Restrict access to discs that are unsuitable for
children. These types of discs must be recorded
with ratings.
Note
•
•
You must turn on the HDMI CEC operations on the TV/
devices before you can enjoy the EasyLink controls. See
the TV/devices manual for details.
Philips does not guarantee 100% interoperability with all
HDMI CEC compliant devices.
1. Press OK.
2. Select a rating level, then press OK.
3. Press the numeric buttons to enter the password.
EN 17
Note
Note
•
•
•
Rated DVDs above the level you set in [Parental
Control] require a password to be played.
The ratings are country-dependent. To allow all discs to
play, select ‘8’.
•
Ensure that the subtitle file has the exact same file name
as the movie file. If for example the file name of the
movie is ‘Movie.avi’, then you need to name the text file
‘Movie.sub’ or ‘Movie.srt’.
Some discs have ratings printed on them but are not recorded
with ratings. This function has no effect on such discs.
[Version Info]
Display the software version of this product.
[PBC]
Turn on or off the content menu of VCDs/SVCDs
with PBC (playback control) feature.
Note
•
[On] - Display the index menu when you load
a disc for play.
[Off] - Skip the menu and start play from the
first track.
•
This information is required when you want to find out if a
newest software version is available at the Philips website
that you may download and install on this product.
•
[Mp3/Jpeg Nav]
[Default]
Select to display the folders or display all the files.
Reset all the settings of this product to factory
default, except for [Disc Lock], [Parental Control]
and [Password] settings.
•
•
[View Files] - Display all the files.
[View Folders] - Display the folders of MP3/
WMA files.
[Password]
Set or change the password for locked discs and
play restricted DVDs.
8 Additional information
Update software
For software updates, check the current software
version of this product to compare with the latest
software (if available) at the Philips website.
Caution
•
Power supply must not be interrupted during software
upgrade.
1
Press SETUP.
2
3
4
Select [Preferences] > [Version Info], and
then press OK.
1. Press the Numeric buttons to enter ‘136900’ or
the last set password at [Old Password] field.
2. Enter the new password at [New Password]
field.
Write down the file name, and then press
SETUP to exit the menu.
the latest software version, using the file name
for this product.
3. Enter the new password again at
[Confirm PWD] field.
5
Refer to the upgrade instructions on the
website for more information.
4. Press OK to exit the menu.
Note
Note
•
If you forget the password, enter ‘136900’ before you set
a new password.
•
Disconnect the power cord for a few seconds and
connect again to turn on the product.
[DivX Subtitle]
Select a character set that supports the DivX subtitle.
Care
•
[Standard] - English, Irish, Danish, Estonian,
Finnish, French, German, Italian, Portuguese,
Luxembourgish, Norwegian (Bokmål and
Nynorsk), Spanish, Swedish, Turkish
[Hebrew] - Hebrew
Caution
•
Never use solvents such as benzene, thinner, cleaners
available commercially, or anti-static sprays intended for discs.
•
18 EN
Clean discs
To keep the warranty valid, never try to repair the
product yourself.
Wipe the disc with a micro fibre cleaning cloth from
the centre to the edge in a straight line movement.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, register your product and get
Specifications
If you contact Philips, you will be asked for the model
and serial number of your product.The model
number and serial number are on the back of your
product.Write the numbers here:
Note
•
Specification and design are subject to change without notice
Model No. __________________________
Serial No. ___________________________
USB
•
•
Compatibility: Hi-Speed USB (2.0)
Class support: UMS (USB Mass Storage Class)
Main unit
The buttons on this unit do not work.
Video
•
•
•
•
Signal system: PAL / NTSC
•
Disconnect this product from the power
outlet for a few minutes, then connect again.
Composite video output: 1 Vpp ~ 75 ohm
Component video output: 0.7 Vpp ~ 75 ohm
HDMI output: 480i, 480p, 576i, 576p, 720p,
1080i, 1080p
No reaction to the remote control.
•
•
Connect this product to the power outlet.
Point the remote control at the IR sensor
located on the front panel of this product.
Insert the batteries correctly.
Audio
•
•
Analog stereo output
Signal to noise ratio (1 kHz): > 90 dB
(A-weighted)
•
•
Insert new batteries in the remote control.
•
•
•
•
•
Dynamic Range (1 kHz): > 80 dB (A-weighted)
Crosstalk (1 kHz): > 90 dB
Distortion/noise: (1 kHz): > 75 dB
MPEG MP3: MPEG Audio L3
Digital output
Picture
No picture.
•
See the TVs user manual on how to select
the correct input on the TV. Change the TV
channel until you see the Philips screen.
If you have turned on the progressive scan
setting or change the TV system setting,
switch back to default mode: 1) Press to
open the disc compartment. 2) Press the
Numeric button ‘1’ (for progressive scan) or
the Numeric button’3’ (for TV system).
•
Coaxial
•
•
HDMI output
Main unit
•
•
Dimensions (w x h x d): 360 x 39 x 209 (mm)
Net Weight: 1.49 kg
Power
•
•
•
Power supply rating: 110-240V, 50/60HZ
Power consumption: < 10 W
No picture on HDMI connection.
Power consumption in standby mode: < 0.1 W
•
If this product is connected to an unauthorized
display device with an HDMI cable, the audio/
video signal may not be output.
Accessories supplied
•
•
•
•
•
Remote control and batteries
HDMI cable
•
•
Check if the HDMI cable is faulty. Replace a
new HDMI cable.
Audio/Video cables
AC power cord
If this happens when you change the HDMI
video resolution, you have to switch to its
default mode: 1) Press to open the disc
compartment. 2) Press the numeric button “1”.
User Manual
Laser specification
•
Type: Semiconductor laser InGaAIP (DVD),
AIGaAs (CD)
Sound
•
•
Wave length: 658 nm (DVD), 790 nm (CD)
Output Power: 7.0 mW (DVD), 10.0 mW
(VCD/CD)
No audio output from the TV.
•
Ensure that the audio cables are connected to
the audio input of the TV.
•
Beam divergence: 60 degrees
•
Assign the audio input of the TV to the
corresponding video input. See the TV user
manual for details.
9 Troubleshooting
No audio output from the loudspeakers of the
audio device (stereo system/amplifier/receiver).
•
Ensure that the audio cables are connected to
the audio input of the audio device.
Turn on the audio device to its correct audio
input source.
Warning
•
•
Risk of electric shock. Never remove the casing of the product.
EN 19
No sound on HDMI connection.
H
•
You may not hear any sound from the HDMI
output if the connected device is non-HDCP
compliant or only DVI-compatible.
HDMI
High-Definition Multimedia Interface is a high-speed
digital interface that can transmit uncompressed
high definition video and digital multichannel
audio. It delivers high quality picture and sound
quality, completely free from noise. HDMI is fully
backward-compatible with DVI.
•
Ensure that the [HDMI Audio] setting is turned on.
No sound during DivX video playback
•
The audio codec may not be supported by this
product.
As required by the HDMI standard, connecting to
HDMI or DVI products without HDCP (High-
bandwidth Digital Content Protection) will result in
no Video or Audio output.
Play
The disc cannot be played.
•
The disc is badly scratched, deformed, or dirty.
Replace or clean the disc.
•
Use the correct disc format or file format.
J
DivX video files cannot be played.
JPEG
•
•
•
Ensure that the DivX video file is complete.
Ensure that the file name extension is correct.
Due to Digital Rights issue, the DRM-protected
video files cannot be played through an analog
video connection (e.g. composite, component and
scart). Use an HDMI connection to play these files.
A very common digital still picture format. A still-
picture data compression system proposed by the
Joint Photographic Expert Group, which features
small decrease in image quality in spite of its high
compression ratio. Files are recognized by their file
extension ‘.jpg’ or ‘.jpeg.’
The aspect ratio of the screen is not aligned with
theTV display setting.
•
The aspect ratio is fixed on the disc.
M
DivX subtitles are not displayed correctly.
MP3
•
Ensure that the subtitle file name is the same
as the movie file name.
A file format with a sound data compression
system. MP3 is the abbreviation of Motion Picture
Experts Group 1 (or MPEG-1) Audio Layer 3. With
the MP3 format, one CD-R or CD-RW can contain
about 10 times more data than a regular CD.
•
Select the correct character set.
•
•
Press SETUP.
Select [Preferences] > [DivX Subtitle] in
the menu.
•
Select the character set that supports the
subtitle.
P
PBC
Playback Control. A system where you navigate
through a Video CD/Super VCD with on-screen
menus that are recorded onto the disc. You can
enjoy interactive playback and search.
10 Glossary
A
Progressive scan
The progressive scan displays twice the number of
frames per second than in an ordinary TV system. It
offers higher picture resolution and quality.
Aspect ratio
Aspect ratio refers to the length to height ratio of
TV screens. The ratio of a standard TV is 4:3, while
the ratio of a high-definition or wide TV is 16:9.
The letter box allows you to enjoy a picture with a
wider perspective on a standard 4:3 screen.
W
WMA
Windows Media™ Audio. Refers to an audio
compression technology developed by Microsoft
Corporation. WMA data can be encoded with
Windows Media player version 9 or Windows
Media player for Windows XP. Files are recognized
by their file extension ‘.wma.’
D
DivX Video-On-Demand
This DivX Certified ® device must be registered
in order to play DivX Video-on-Demand (VOD)
content. To generate the registration code, locate
the DivX VOD section in your device setup menu.
Go to vod.divx.com with this code to complete the
registration process and learn more about DivX video.
WMV [Windows Media Video]
Refers to a video compression technology developed
by Microsoft Corporation. WMV content can be
encoded by using Windows Media® Encoder 9 series.
Files are recognised by their file extension ‘.wmv’.
20 EN
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
DVP3588K_98_UM_V2.0_1025
|