Register your product and get support at
DVP3522
EN User manual
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
1 Important
Safety and important notice
Warning
information on a recycling center in your area.
Copyright notice
• Risk of overheating! Never install the product in a
confined space. Always leave a space of at least 4 inches
around the product for ventilation. Ensure curtains or
other objects never cover the ventilation slots on the
product.
• Never place the product, remote control or batteries
near naked flames or other heat sources, including direct
sunlight.
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
• Avoid high temperature, moisture, water and dust.
• This unit must not be exposed to dripping or splashing.
• Never place any object or items that can damage this
unit (e.g., liquid filled objects, lighted candles).
• Never place this product on other electrical equipment.
• Keep away from this product during lightning storms.
• Where the mains plug or an appliance coupler is used as
the disconnect device, the disconnect device shall remain
readily operable.
CLASS 1
LASER PRODUCT
• Visible and invisible laser radiation when open. Avoid
exposure to beam.
About Progressive Scan
Trademark notice
Consumers should note that not all high definition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the
picture. In case of 525 or 625 progressive scan
picture problems, it is recommended that the user
switch the connection to the ‘standard definition’
output. If there are questions regarding our TV set
compatibility with this model 525p and 625p DVD
player, please contact our customer service center.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Disposal of your old product and
batteries
‘DVD Video’ is a trademark of DVD Format/Logo
Licensing Corporation.
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about the
local rules on the separate collection of electrical
and electronic products and batteries. The correct
disposal of these products helps prevent potentially
negative consequences on the environment and
human health.
Your product contains batteries, which cannot be
disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
Windows Media and the Windows logo are trademarks,
or registered trademarks of Microsoft Corporation in the
United States and/or other countries.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, Inc.
3
EN
Remote control
2 Your DVD player
Congratulations on your purchase, and welcome to
Philips!To fully benefit from the support that Philips
welcome.
a
b
c
Playable media
This product can play:
r
q
•
DVD, DVD-Video, DVD+R/+RW, DVD-R/-
RW, DVD+R/-R DL (Dual Layer)
Video CD/SVCD
Audio CD, CD-R/CD-RW
MP3 media, WMA media, JPEG files
USB flash drive
d
•
•
•
•
p
e
Region codes
f
g
o
n
You can play discs with the following region codes.
DVD region code
Countries
Latin America
h
i
j
m
l
k
Product overview
Main unit
a
a
b
c
d e f
•
•
Turn on the unit or switch to standby.
Open or close the disc compartment.
b
c
a
•
Turn on the unit or switch to standby.
Disc compartment
Display panel
DISC MENU
b
c
d
•
•
•
Access or exit the disc menu.
Switch to the disc mode.
During photo slideshow, switch photo
display between the Fun mode (color)
and the Simple mode (black and white).
For VCD and SVCD: turn on or off PBC
(playback control).
•
•
•
Open or close the disc compartment.
e
f
•
Start, pause or resume disc play.
(USB) jack
Connect a USB flash drive.
d
•
•
Navigate the menus.
Search fast-forward ( ) or fast-backward
( ).
•
Search slow-forward ( ) or slow-
backward ( ).
EN
4
e
f
BACK
Return to the previous display menu.
Option 1: Connect to component video
jacks
•
•
/
Y
Skip to the previous or next title, chapter,
or track.
Pb
Pr
g
h
i
j
•
Switch to the USB mode.
Numeric buttons
•
SUBTITLE
•
Select an item to play.
Select a subtitle language on a disc.
ZOOM
•
•
Fit the picture display to the TV screen.
Zoom the picture in or out.
1
2
Connect the component video cables (not
supplied) to:
k
l
m
REPEAT
•
Select various repeat play modes.
•
•
the Y Pb Pr jacks on this product.
the COMPONENT VIDEO input jacks
on the TV.
REPEAT A-B
•
Repeat play for a specific section.
AUDIO/CREATE MP3
Connect the audio cables to:
•
Select an audio language or channel on
a disc.
Access the menu of creating MP3 files.
•
the AUDIO OUT L/R jacks on this
product.
the audio input jacks on the TV.
•
•
n
o
p
Option 2: Connect to video (CVBS) jack
•
•
Stop play.
Start, pause or resume disc play.
INFO
For discs: access the play options or
display the current disc status.
For slideshows: display a thumbnail view
of photo files.
•
•
q
r
OK
•
Confirm an entry or selection.
SETUP
Access or exit the setup menu.
•
1
2
Connect a composite video cable to:
•
the TV OUT jack on this product.
3 Connect
•
the video input jack on the TV.
Connect the audio cables to:
Connect audio/video cables
•
the AUDIO OUT L/R jacks on this
product.
the audio input jacks on the TV.
Select the best video connection that TV can
support.
•
•
Option 1: Connect to component video jacks
(for a standard TV or Progressive Scan TV).
Option 2: Connect to video (CVBS) jack (for a
standard TV).
Optional audio connections
Connect the audio from this product to other devices
to enhance sound.
•
5
EN
Connect to digital amplifier/receiver
Connect power
DIGITAL AUDIO
INPUT
Caution
COAXIAL
• Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
of the unit.
• Before connecting the AC power cord, ensure you have
completed all other connections.
1
Connect a coaxial cable (not supplied) to:
•
•
the COAXIAL jack on this product.
the COAXIAL/DIGITAL input jack on
the device.
Note
• The type plate is located on the back of the product.
Connect analogue stereo system
1
Connect the AC power cord to:
•
this product.
•
the wall socket.
This product is ready to be set up for use.
»
4 Get started
Prepare the remote control
1
Connect the audio cables to:
1
2
3
Press and push the battery compartment to
•
the AUDIO OUT L/R jacks on this
product.
slide it open (see “1” in the illustration).
Insert two AAA batteries with correct
polarity (+/-) as indicated.
Push and slide back the battery compartment
(see “3” in the illustration).
•
the audio input jacks on the device.
Connect a USB flash drive
1
Connect a USB flash drive to the
this product.
jack on
Note
• If you are not going to use the remote control for a long
time, remove the batteries.
Note
• Do not mix batteries (old and new or carbon and
• This product can only play/view MP3, WMA or JPEG files
that are stored on a USB flash drive.
alkaline, etc.).
• Batteries contain chemical substances, so they should be
disposed of properly.
• Press the
button to access the content and play
the files.
Find theTV input channel
1
2
Press to turn on this product.
Turn on the TV and switch to the video input
channel (refer to the TV user manual on how
to select the A/V input channel).
EN
6
Select menu display language
Note
• If a blank/distorted screen is displayed, wait for 15
seconds for the auto recovery.
• If no picture is displayed, turn off the progressive scan
mode as follows:
1) Press to open the disc compartment.
2) Press the Numeric button ‘1’.
6
Press SETUP to exit the menu.
You can now turn on the progressive scan
mode on the TV (see the TV user manual).
7
Note
1
Press SETUP.
»
[General Setup] menu is displayed.
• During play, when the progressive scan mode is on for
both this product and the TV, distorted picture may
display. In this case, turn off the progressive scan feature
on both this product and the TV.
2
3
Select [OSD Language], and then press
.
Press
OK.
to select a language, and then press
Turn on progressive scan
5 Play
Play a disc
Caution
Note
• To use the progressive scan feature, you must connect a
progressive scan TV with the component video jacks (see
“Connect” > “Connect audio/video cables” > “Option 1:
Connect to the component video jacks” for details).
• Do not place any objects other than discs into the disc
compartment.
• Do not touch the disc optical lens inside the disc
compartment.
1
2
3
Press to open the disc compartment.
Insert a disc with its label facing up.
Press to close the disc compartment and
start disc play.
Note
• Check the types of discs supported (see “Your DVD
player” > “Playable media”).
• If the password entry menu is displayed, enter the
password before you can play the locked or restricted
disc (see “Adjust settings” > “Preferences” > [Parental
Control]).
1
Turn on the TV to the video input.
Press SETUP.
Press to select [Video Setup].
2
3
4
Select [Progressive] > [On], and then press
OK.
»
Play video
A warning message is displayed.
5
To proceed, select [Ok] and then press OK.
Note
»
The progressive setup is complete.
• Some operations may not work with some discs. See the
information accompanying the disc for details.
7
EN
Control video play
AccessVCD menu
1
Play a title.
The PBC (playback control) feature is available for
VCD/SVCD, which can display the contents menu
for you to select a play option. The PBC is on by
default in the factory.
2
Use the remote control to control the play.
Button
Action
Start, pause or resume disc play.
Stop disc play.
Note
• See “Adjust settings” > “Preferences” > [PBC] on how
Skip to a previous/next title or
chapter.
Search fast-backward or fast-
forward. Press repeatedly to change
the search speed.
Search slow-forward or slow-
backward. Press repeatedly to
change the search speed.
For VCD/SVCD, slow-backward
search is not available.
,
,
to turn PBC on or off.
,
1
2
Display the contents menu via one of the
following ways:
•
•
If PBC is on, load in a VCD/SVCD.
During play with PBC on, press
BACK.
Press the Numeric buttons to select a play
option, and then press OK to start play.
•
If PBC is turned off, it skips the menu
display and starts play from the first
track.
AUDIO/
CREATE
MP3
Select an audio language or channel
available on a disc.
Preview disc contents
SUBTITLE
Select a subtitle language available
on a disc.
Select or turn off repeat mode.
Repeat options may vary from disc
type.
1
During play, press
The disc status menu is displayed.
Select [Preview], and then press
INFO.
REPEAT
»
2
3
.
Select a preview option, and then press OK.
REPEAT A-B Repeat a specific section within a
»
A thumbnails preview screen is displayed.
track/disc.
•
To go to the next/previous preview
screen, select [Prev] or [Next], and then
press OK.
To start play, press OK at the selected
thumbnail picture.
Fit the picture format to the TV
screen.
Press repeatedly until the image is
scaled to fit to the TV screen.
Toggle between screen aspect ratio
and different zoom factor.
To pan through the zoomed image,
press the Navigation buttons.
ZOOM
(Screen fit)
•
ZOOM
INFO
Skip play to a specific time
1
During play, press
The disc status menu is displayed.
Select an option for the current elapsed
playing time, and then press
INFO.
»
Access the play options and display
the current disc status.
2
.
•
•
•
•
[TT Time] (title time)
[CH Time] (chapter time)
[Disc Time]
[Track Time]
Access DVD menu
1
Press DISC MENU to access the disc root
menu.
3
Press the Numeric buttons to enter the time
to skip to, then press OK.
2
Select a play option, then press OK.
•
In some menus, press the Numeric
buttons to input your selection.
Display play time
1
2
3
During play, press
The disc status menu is displayed.
Select [Time Disp.], and then press
INFO.
»
.
»
The display options vary from disc type.
Select an option, and then press OK.
EN
8
View DVD play from different angles
Quick skip play
1
During play, press
INFO.
This feature is only available for audio CDs.
»
The disc status menu is displayed.
1
During play, press
select an option.
INFO repeatedly to
2
3
Select [Angle], and then press .
Press the Numeric buttons to change the
Display
Action
Skip play to a specific time
within the disc.
Skip play to a specific time
within a track.
Skip play to a specific track
number.
angle.
[Disc Go To]
[Track Go To]
[Select Track]
»
Play changes to the selected angle.
Note
• Applicable only to discs that contain multi-angle scenes.
Repeat play for a specific section
2
Press the numeric buttons to change the time/
number to skip to.
1
2
3
During play, press REPEAT A-B at the start
point.
Play MP3/WMA music
MP3/WMA is a type of highly compressed audio file
(files with .mp3, .wma extensions).
1
Press REPEAT A-B again to set the end point.
»
Repeat play starts.
To cancel repeat play, press REPEAT A-B
again.
Insert a disc or USB flash drive that contains
the MP3/WMA music.
•
For USB, press
.
Note
»
A contents menu is displayed.
• The marked section for repeat play is only possible
within a track/title.
2
If play does not automatically start, select a
track to play.
•
To select another track/folder, press
,
then press OK.
Play music
Control a track
Note
• For disc recorded in multiple sessions, only the first
session is played.
1
Play a track.
Use the remote control to control the play.
2
• For a WMA file that is protected by Digital Rights
Management (DRM), it cannot be played on this product.
• This product does not support MP3PRO audio format.
• For any special character that is present in the MP3 track
name (ID3) or album name, it might not be displayed
correctly on the screen because these characters are not
supported.
Button
Action
Start, pause or resume disc play.
Stop disc play.
Skip to a previous/next track.
Select an item to play.
,
• Folders/files that exceed the supported limit of this
product cannot be displayed or played.
Play photo
Play photo as slideshow
You can play JPEG photos (files with .jpeg or .jpg
extensions).
Searches fast-backward or fast-
forward. Press repeatedly to
change the search speed.
,
1
Insert a disc or USB that contains the JPEG
REPEAT
Select or turn off repeat mode.
Repeat options may vary from
disc type.
photos.
•
For USB, press
.
»
Slideshow begins (for Kodak disc), or a
contents menu (for JPEG disc) is displayed.
9
EN
2
Select a photo, and then press OK to start
Note
slideshow.
»
For a photo recorded with the “exif”
format, the display orientation is
automatically optimized.
• To create a musical slideshow, you must store the MP3/
WMA and JPEG files on the same disc/USB flash drive.
1
Play MP3/WMA music.
•
•
To display photos in color (Fun Mode) or in
black and white (Simple Mode), press DISC
MENU.
2
3
Press
BACK to return to the main menu.
Navigate to the photo folder/album and press
To preview the photos in thumbnail, press
INFO.
OK to start slideshow play.
»
Slideshow begins and continues till the end
of the photo folder or album.
•
•
•
To select a photo, press the Navigation
buttons.
»
Audio continues to play until the end of
the disc.
To enlarge the selected photo and start
slideshow, press OK.
•
•
To stop slideshow play, press
To stop music play, press again.
.
To return to the menu, press
BACK.
Note
Play from a USB flash drive
• It may require longer time to display the disc content
on the TV due to the large number of songs/photos
compiled onto one disc/USB flash drive.
• If the JPEG photo is not recorded with an ‘exif’ type
file, the actual thumbnail picture cannot be shown on
the screen. It is replaced by a ‘blue mountain’ thumbnail
picture.
1
2
3
Connect a USB flash drive to the
jack on
this product.
Press the
button.
»
A contents menu is displayed.
If play does not start automatically, select a file
to play.
• This product can only display digital camera pictures
according to the JPEG-EXIF format, typically used by
almost all digital cameras. It cannot display Motion JPEG,
or pictures in formats other than JPEG, or sound clips
associated with pictures.
•
For more information, see the chapters
“Play music”, “Play photo” and “Play
video” for details.
• Folders/files that exceed the supported limit of this
4
To stop play, press
.
product cannot be displayed or played.
•
To switch to the disc mode, press the
button.
Control photo play
Note
1
Play a photo slideshow.
2
Use the remote control to control the play.
• This product plays/views MP3, WMA or JPEG files that
are stored on a USB flash drive.
Button
Action
Rotate a photo anti-clockwise/
clockwise.
Rotate a photo horizontally/
vertically.
/
6 Other features
/
Create MP3 files
With this product, you can convert audio CDs into
MP3 audio files.The created MP3 audio files are saved
in the USB flash drive.
Zoom in or out of a photo.
Play pauses in zoom mode.
Stop a play.
ZOOM
1
Insert an audio CD.
Connect a USB flash drive to the
this product.
Play musical slideshow
Create a musical slideshow to play MP3/WMA
music files and JPEG photo files simultaneously.
2
jack on
3
4
During disc play, press AUDIO/CREATE MP3.
The MP3 creation menu is displayed.
»
Select [Yes] in the menu, and then press OK.
EN 10
Create MP3
7 Adjust settings
TRACK
OPTIONS
Track01
04:14
04:17
03:58
04:51
03:53
04:09
04:38
Speed
Normal
128kbps
Yes
Note
Track02
Track03
Track04
Track05
Track06
Track07
Bitrate
CRT ID3
Device
• If the setup option is grayed out, it means the setting
cannot be changed at the current state.
USB 1
SUMMARY
Press [OK] button
to change speed.
General setup
Select all
Start
Exit
Deselect all
5
Select a conversion option in the [OPTIONS]
panel, and then press OK repeatedly to select
an item.
Option
[Speed]
Description
Select a copying speed.
[Bitrate]
Select a quality level.
Higher bitrate for better sound
quality and bigger file size.
1
Press SETUP.
»
[General Setup] menu is displayed.
[CRT ID3]
[Device]
Copy track information into the
MP3 file.
The created files can only be saved
in a USB flash drive.
2
3
4
Press to enter the submenu.
Select an option, and then press OK.
Select a setting, and then press OK.
•
To return to the previous menu, press
BACK.
To exit the menu, press SETUP.
6
7
Press to access the [TRACK] panel.
Select an audio track, and then press OK.
•
[Disc Lock]
•
•
To select another track, repeat step 7.
To select all tracks, select [Select all] in
the menu, and press OK.
To deselect all tracks, select [Deselect
all] in the menu, and press OK.
Set the play restriction for a disc which is loaded in
the disc compartment (maximum 20 discs can be
locked).
•
•
[Lock] - Restrict the access to the current
disc. At the next time when you want to play
this disc or unlock it, you need to enter the
password.
8
Select [Start] in the menu, and then press OK
to start to convert.
»
Once complete, a new folder is created
automatically in the USB flash drive to store
all the new MP3 files.
•
[Unlock] - Play all discs.
[OSD Language]
Select a language for on-screen menu.
[Sleep Timer]
•
To exit the menu, select [Exit], and then
press OK.
Switch automatically to standby at the preset time.
•
•
[Off] - Disable sleep mode.
[15 Mins], [30 Mins], [45 Mins], [60 Mins] -
Select the countdown time for this product to
switch to standby.
Note
• When you convert, never press any button.
• DTS CDs and copy-protected CDs cannot be converted.
• Writer-protected or password-protected USB flash
drives cannot be used to store MP3 files.
[Auto Standby]
Turn on/off the auto standby mode.
•
[On] - Switch to standby after 15 minutes
of inactivity (for example, in pause or stop
mode).
•
[Off] - Disable the auto standby mode.
11 EN
Set the default volume level when you play a disc.
Audio setup
Audio Setup
1. Press OK.
2. Press
to set the volume.
Analogue Output
Digital Audio
Volume
Sound Mode
CD Upsampling
Night Mode
3. Press OK to confirm and exit.
[Sound Mode]
Select a preset sound effect to enhance the audio
output.
•
[3D] - Select a virtual surround sound effect
that is produced from the left and right audio
channels.
•
•
[Movie Mode] - Select a sound effect for
movies.
1
2
Press SETUP.
[Music Mode] - Select a sound effect for
music.
»
[General Setup] menu is displayed.
Press to select [Audio Setup], and then
press to enter the submenu.
[CD Upsampling]
For better sound quality in stereo mode, convert
the music CD to a higher sampling rate.
3
4
Select an option, and then press OK.
Select a setting, and then press OK.
•
•
[Off] - Turn off CD-upsampling.
[88.2kHz] - Convert to twice the original
sampling rate.
[176.4kHz] - Convert to four times the original
sampling rate.
•
To return to the previous menu, press
BACK .
To exit the menu, press SETUP.
•
•
[Analogue Output]
Select an analogue setting based on the audio
device that is connected through the analogue
audio jack.
[Night Mode]
Make loud sound level softer and soft sound level
louder so that you can watch the DVD movies at a
low volume, without disturbing others.
•
[LT/RT] - For the surround sound output
through two speakers.
•
•
[On] - Enjoy quiet viewing at night.
[Off] - Enjoy surround sound with a full
dynamic range.
•
[Stereo] - For the stereo output.
[Digital Audio]
Select a digital setting based on the digital amplifier/
receiver that is connected through the digital jack
(coaxial/digital).
Note
•
[Digital Output] - Select a type of digital
• Applicable only to Dolby Digital encoded DVDs.
output.
•
[All] - Support multi-channel audio
formats.
[Off] - Disable digital output.
[PCM Only] - Downmix to two-channel
audio format.
Video setup
•
•
•
[LPCM Output] - Select the LPCM (Linear
Pulse Code Modulation) output sampling rate.
•
•
[48kHZ] - For discs recorded at sampling
rate of 48 kHz.
[96kHZ] - For discs recorded at sampling
rate of 96 kHz.
Note
• [LPCM Output] setting is only available if the [Digital
Output] is set to [PCM Only].
1
Press SETUP.
[General Setup] menu is displayed.
• The higher the sampling rate, the better the sound
»
quality.
[Volume]
EN 12
•
•
•
[Default picture] - The default wallpaper
preset as the Philips logo.
2
Press to select [Video Setup], and then
press to enter the submenu.
[Saved picture] - A captured video image or
JPEG photo.
3
4
Select an option, and then press OK.
Select a setting, and then press OK.
[Current picture] - Capture a video image or
JPEG photo and save it on the product.
•
To return to the previous menu, press
BACK.
To exit the menu, press SETUP.
•
1. Play a video or photo slideshow.
2. Select a video image or photo: press
pause, and then press SETUP.
3. Navigate to the option ([Video Setup] >
[My Wallpaper] > [Current picture]).
4. Press OK to confirm.
[TV System]
to
Change this setting if the video does not appear
correctly. By default, this setting matches the most
common setting for TVs in your country.
•
•
[PAL] - For a PAL-system TV.
[Multi] - For TV that is compatible with both
PAL and NTSC.
»
One video image or JPEG photo is saved as
wallpaper.
•
[NTSC] - For an NTSC-system TV.
»
A newly saved image or photo replaces the
earlier one.
[TV Display]
Select a display format:
[Closed Caption]
Turn off or on display captions.
•
[On] - Show the sound effects in subtitles.
Applicable only to discs with Closed Caption
information included and the TV supports this
feature.
•
•
[4:3 Pan Scan] - For a 4:3 screen TV: full-height
display with the trimmed sides.
[4:3 Letter Box] - For a 4:3 screen TV: wide-
screen display with black bars on the top and
bottom of the screen.
•
[Off] - Disable closed caption.
Preferences
•
[16:9] - For a wide-screen TV: display ratio
16:9.
Note
• Stop disc play before you can access to [Preferences].
[Progressive]
If a progressive scan TV is connected to this
product, turn on the progressive scan mode.
•
•
[On] - Turn on progressive scan.
[Off] - Turn off progressive scan mode.
Preferences
Audio
Subtitle
Disc Menu
Parental Control
Note
• For more detailed description, see “Get started” >
“Turn on progressive scan”.
PBC
Mp3/Jpeg Nav
Password
Version Info
[Picture Setting]
Select a predefined set of picture color settings or
customize the personal setting.
•
•
•
•
[Standard] - Original color setting.
[Bright] - Vibrant color setting.
1
Press SETUP.
[General Setup] menu is displayed.
»
[Soft] - Warm color setting.
[Personal] - Customize the color setting. Set
the level of brightness, contrast, tint and color
saturation, then press OK.
[My Wallpaper]
Select a picture as the wallpaper.
13 EN
[Password]
2
Press to select [Preferences], and then
press
Select an option, and then press OK.
Set or change the password for locked discs and
play restricted DVDs.
.
3
4
Select a setting, and then press OK.
•
To return to the previous menu, press
BACK.
To exit the menu, press SETUP.
•
[Audio]
Select an audio language for disc play.
[Subtitle]
Select a subtitle language for disc play.
[Disc Menu]
Select a disc menu language.
Note
1. Press the Numeric buttons to enter ‘136900’ or
the last set password at [Old Password] field.
2. Enter the new password at [New Password]
field.
• If the language you have set is not available on the disc,
the disc uses its own default language.
• For some DVDs, the subtitle/audio language can only
change from the disc menu.
• To select the languages that are not listed in the menu,
select [Others]. Then check the Language Code list at
the back of this user manual and enter the respective
language code.
3. Enter the new password again at
[Confirm PWD] field.
4. Press OK to exit the menu.
[Parental Control]
Note
Restrict access to discs that are unsuitable for
children. These types of discs must be recorded
with ratings.
• If you forget the password, enter ‘136900’ before you set
a new password.
1. Press OK.
[Version Info]
2. Select a rating level, then press OK.
3. Press the numeric buttons to enter the
password.
Display the software version of this product.
Note
• This information is required when you want to find out
if a newest software version is available at the Philips
website that you may download and install on this
product.
Note
• Rated DVDs above the level you set in [Parental
Control] require a password to be played.
• The ratings are country-dependent. To allow all discs to
play, select ‘8’.
• Some discs have ratings printed on them but are not
recorded with ratings. This function has no effect on
such discs.
[Default]
Reset all the settings of this product to factory
default, except for [Disc Lock], [Parental Control]
and [Password] settings.
[PBC]
Turn on or off the content menu of VCDs/SVCDs
with PBC (playback control) feature.
8 Additional information
Update software
For software updates, check the current software
version of this product to compare with the latest
software (if available) at the Philips website.
•
[On] - Display the index menu when you load
a disc for play.
•
[Off] - Skip the menu and start play from the
first track.
[Mp3/Jpeg Nav]
Select to display the folders or display all the files.
•
•
[View Files] - Display all the files.
[View Folders] - Display the folders of MP3/
WMA files.
EN 14
•
•
MPEG MP3: MPEG Audio L3
Digital output
Caution
•
Coaxial
• Power supply must not be interrupted during software
upgrade.
Main unit
•
•
Dimensions (w x h x d): 360 x 39 x 209 (mm)
Net Weight: approximately 1.4 kg
1
Press SETUP.
Select [Preferences] > [Version Info], and
then press OK.
Write down the file name, and then press
SETUP to exit the menu.
the latest software version, using the file name
for this product.
Power
2
3
4
•
•
•
Power supply rating: 110 - 240V, 50/60HZ
Power consumption: < 10 W
Power consumption in standby mode: < 1 W
Accessories supplied
•
•
•
•
•
Remote control and batteries
User Manual
Audio/Video cables
AC power cord
Power Plug Adapter
5
Refer to the upgrade instructions on the
website for more information.
Laser specification
•
Note
Type: Semiconductor laser InGaAIP (DVD),
AIGaAs (CD)
• Disconnect the power cord for a few seconds and
connect again to turn on the product.
•
•
Wave length: 656 nm (DVD), 790 nm (CD)
Output Power: 7.0 mW (DVD), 10.0 mW
(VCD/CD)
•
Beam divergence: 60 degrees
Care
Caution
9 Troubleshooting
• Never use solvents such as benzene, thinner, cleaners
available commercially, or anti-static sprays intended
for discs.
Warning
• Risk of electric shock. Never remove the casing of the
product.
Clean discs
Wipe the disc with a micro fibre cleaning cloth from
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, register your product and get
If you contact Philips, you will be asked for the model
and serial number of your product.The model
number and serial number are on the back of your
product.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
tShpeececnitfirectaottihoenedsge in a straight line movement.
Note
• Specification and design are subject to change without
notice
USB
•
•
Compatibility: Hi-Speed USB (2.0)
Class support: UMS (USB Mass Storage Class)
Video
•
•
•
Signal system: PAL / NTSC
Composite video output: 1 Vpp ~ 75 ohm
Component video output: 0.7 Vpp ~ 75 ohm
Audio
•
•
Analog stereo output
Signal to noise ratio (1 kHz): > 90 dB
(A-weighted)
Dynamic Range (1 kHz): > 80 dB (A-weighted)
Crosstalk (1 kHz): > 80 dB
Distortion/noise: (1 kHz): > 70 dB
•
•
•
15 EN
Main unit
The buttons on this unit do not work.
10 Glossary
•
Disconnect this product from the power
outlet for a few minutes, then connect again.
A
No reaction to the remote control.
•
•
Aspect ratio
Connect this product to the power outlet.
Point the remote control at the IR sensor
located on the front panel of this product.
Insert the batteries correctly.
Aspect ratio refers to the length to height ratio of
TV screens. The ratio of a standard TV is 4:3, while
the ratio of a high-definition or wide TV is 16:9.
The letter box allows you to enjoy a picture with a
wider perspective on a standard 4:3 screen.
•
•
Insert new batteries in the remote control.
Picture
No picture.
J
•
See the TVs user manual on how to select
JPEG
the correct input on the TV. Change the TV
channel until you see the Philips screen.
If you have turned on the progressive scan
setting or change the TV system setting,
switch back to default mode: 1) Press to
open the disc compartment. 2) Press the
Numeric button ‘1’ (for progressive scan) or
the Numeric button’3’ (for TV system).
A very common digital still picture format. A still-
picture data compression system proposed by the
Joint Photographic Expert Group, which features
small decrease in image quality in spite of its high
compression ratio. Files are recognized by their file
extension ‘.jpg’ or ‘.jpeg.’
•
M
Sound
MP3
No audio output from the TV.
A file format with a sound data compression
system. MP3 is the abbreviation of Motion Picture
Experts Group 1 (or MPEG-1) Audio Layer 3. With
the MP3 format, one CD-R or CD-RW can contain
about 10 times more data than a regular CD.
•
•
Ensure that the audio cables are connected to
the audio input of the TV.
Assign the audio input of the TV to the
corresponding video input. See the TV user
manual for details.
No audio output from the loudspeakers of the
audio device (stereo system/amplifier/receiver).
P
•
Ensure that the audio cables are connected to
the audio input of the audio device.
Turn on the audio device to its correct audio
input source.
PBC
Playback Control. A system where you navigate
through a Video CD/Super VCD with on-screen
menus that are recorded onto the disc. You can
enjoy interactive playback and search.
•
Play
Progressive scan
The disc cannot be played.
The progressive scan displays twice the number of
frames per second than in an ordinary TV system. It
offers higher picture resolution and quality.
•
The disc is badly scratched, deformed, or dirty.
Replace or clean the disc.
•
Use the correct disc format or file format.
The aspect ratio of the screen is not aligned with
theTV display setting.
•
The aspect ratio is fixed on the disc.
EN 16
W
WMA
Windows Media™ Audio. Refers to an audio
compression technology developed by Microsoft
Corporation. WMA data can be encoded with
Windows Media player version 9 or Windows
Media player for Windows XP. Files are recognized
by their file extension ‘.wma.’
17 EN
Language Code
Abkhazian
Afar
Afrikaans
Amharic
6566
6565
6570
6577
6582
7289
6583
6569
6589
6590
7783
6665
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
Inupiaq
Irish
Íslenska
Italiano
Ivrit
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Kernewek
Khmer
7375
7165
7383
7384
7269
7465
7486
7576
7578
7583
7575
7587
7577
8287
7589
7586
7579
Pushto
8083
8285
8185
8277
8279
8278
8377
8371
8365
8367
8382
8378
8381
8368
8373
8373
8376
8379
8384
7882
8385
7073
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9085
Russian
Quechua
Raeto-Romance
Romanian
Rundi
Samoan
Sango
Sanskrit
Sardinian
Serbian
Shona
Arabic
Armenian
Assamese
Avestan
Aymara
Azerhaijani
Bahasa Melayu
Bashkir
Belarusian
Bengali
Bihari
Bislama
Bokmål, Norwegian
Bosanski
Brezhoneg
Bulgarian
Burmese
Castellano, Español
Catalán
Chamorro
Chechen
Chewa; Chichewa;Nyanja7889
Ё᭛
Chuang; Zhuang
Church Slavic; Slavonic 6785
Chuvash
Corsican
Česky
Shqip
Sindhi
Kinyarwanda
Kirghiz
Komi
Sinhalese
Slovensky
Slovenian
Somali
Sotho; Southern
South Ndebele
Sundanese
Suomi
Swahili
Swati
Svenska
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Türkçe
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Korean
Kuanyama; Kwanyama 7574
Kurdish
Lao
Latina
Latvian
Letzeburgesch;
Limburgan; Limburger 7673
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Magyar
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho; Navajo
Ndebele, North
Ndebele, South
Ndonga
Nederlands
Nepali
Norsk
Northern Sami
North Ndebele
Norwegian Nynorsk;
Occitan; Provencal
Old Bulgarian;Old Slavonic 6785
Oriya
Oromo
Ossetian; Ossetic
Pali
Panjabi
Persian
Polski
Português
7585
7679
7665
7686
7666
7678
7684
7666
7775
7771
7285
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7868
7882
7871
7876
7869
7879
8369
7868
7878
7967
9072
9065
6786
6779
6783
6865
6869
6890
6978
6979
6984
6985
6976
7079
7082
7089
7074
Dansk
Deutsch
Dzongkha
English
Esperanto
Estonian
Euskara
Faroese
Français
Frysk
Fijian
Gaelic; Scottish Gaelic 7168
Gallegan
Georgian
Gikuyu; Kikuyu
Guarani
Gujarati
Hausa
Herero
Hindi
Hiri Motu
Hrwatski
Ido
7176
7565
7573
7178
7185
7265
7290
7273
7279
6779
7379
7982
7977
7983
8073
8065
7065
8076
8084
Interlingua (International)7365
Interlingue
Inuktitut
7365
7385
18
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
DVP3522_55_UM_V2.0_1020
|
