Philips DVP3358K User Manual

Register your product and get support at  
DVP3358K  
EN  
User manual  
ZH_CN  
用户手册  
Recycle notice  
1 Important  
This electronic equipment contains a large  
number of materials that can be recycled or  
reused if disassembled by a specialized  
company. If you are disposing of an old  
machine, please take it to a recycling center.  
Please observe the local regulations regarding  
disposal of packaging materials, exhausted  
batteries and old equipment.  
Safety and important notice  
Warning  
Risk of overheating! Never install the DVD player  
in a conned space. Always leave a space of at least  
four inches around the DVD player for ventilation.  
Ensure the curtains or other objects never cover the  
ventilation slots on the DVD player.  
Never place the DVD player, remote control or  
batteries near naked ames or other heat sources,  
including direct sunlight.  
Copyright notice  
Only use this DVD player indoors. Keep this DVD  
player away from water, moisture and liquid-lled  
objects.  
Never place this DVD player on other electrical  
equipment.  
This product incorporates copyright protection  
technology that is protected by method claims  
of certain U.S. patents and other intellectual  
property rights owned by Macrovision  
Keep away from this DVD player during lightning  
storms.  
Where the mains plug or an appliance coupler is  
used as the disconnect device, the disconnect device  
shall remain readily operable.  
Corporation and other rights owners. Use of  
this copyright protection technology must be  
authorized by Macrovision Corporation, and is  
intended for home and other limited viewing  
uses only unless otherwise authorized by  
Macrovision Corporation. Reverse engineering  
or disassembly is prohibited.  
Visible and invisible laser radiation when open. Avoid  
exposure to beam.  
About Progressive Scan  
Consumers should note that not all high  
denition television sets are fully compatible  
with this product and may cause artifacts to be  
displayed in the picture. In case of 525 or 625  
progressive scan picture problems, it is  
recommended that the user switch the  
connection to the ‘standard denition’ output. If  
there are questions regarding our TV set  
compatibility with this model 525p and 625p  
DVD player, please contact our customer  
service center.  
4
EN  
Trademark Notice  
Manufactured under license from Dolby  
Laboratories. Dolby and the double-D symbol  
are registered trademarks of Dolby Laboratories.  
Manufactured under license under U.S. Patent#:  
#5,451,942; 5,956,674; 5,974,380; 5,978,762;  
6,487,535 & other U.S. and worldwide patents issued  
& pending. DTS and DTS Digital Surround are  
registered trademarks and the DTS logos and Symbol  
are trademarks of DTS, Inc. © 1996-2008 DTS, Inc.  
All Rights Reserved.  
Windows Media and the Windows logo are  
trademarks, or registered trademarks of  
Microsoft Corporation in the United States and/  
or other countries.  
DivX, DivX Certied, and associated logos are  
trademarks of DivX, Inc. and are used under  
license.  
®
Plays DivX video with menus, subtitles and  
audio tracks.  
The USB-IF Logos are trademarks of Universal  
Serial Bus Implementers Forum, Inc.  
EN  
5
Create MP3 les  
2 Your DVD  
player  
Convert your favorite audio tracks from an  
audio CD into MP3 format. The created MP3  
les are saved in your USB ash drive.  
Congratulations on your purchase, and  
welcome to Philips! To fully benet from the  
support that Philips offers, register your product  
Karaoke scoring function  
Karaoke scoring gives a score for each  
performance. Have your singing performance  
scored for even more karaoke fun at home!  
This DVD player brings audio and video to life.  
Just plays practically any disc format, including  
the digital photos with absolutely no  
compromise to picture quality.  
Region codes  
Your DVD player plays discs with the following  
region codes.  
Features highlight  
DVD region code  
Countries  
China  
Screen t  
ALL  
View the movie in full screen on any TV with  
this DVD player.  
Progressive scan component video  
Pushes the limits of standard resolution and  
provides a more lm-like image display that is  
more pleasing for viewing DVDs on a TV  
display.  
Hi speed USB 2.0 link  
Simply plug your USB ash drive into the USB  
jack to play your MP3/WMA/JPEG/DivX les to  
enjoy the music play in superb sound quality.  
Media copy  
You can transfer data les such as MP3, WMA  
and JPEG from disc to USB ash drive.  
6
EN  
Remote control  
Product overview  
1
Main unit  
2
3
18  
4
17  
16  
5
1
2
3
4
5
6
7
6
7
15  
14  
a (Standby-on)  
8
• Turn on the DVD player or switch to  
standby mode.  
13  
12  
9
10  
b Disc compartment  
11  
c Display panel  
d Z (Open/Close)  
• Open or close the disc compartment.  
e u (Play/Pause)  
a (Standby-On)  
• Start, pause or resume disc play.  
• Turn on the DVD player or switch to  
standby mode.  
f
(USB) jack  
b Z (Open/Close)  
• Connect a USB ash drive.  
• Open or close the disc compartment.  
g MIC  
• Audio input from a microphone.  
c DISC MENU  
• Access or exit the disc menu.  
• Switch to disc mode.  
• For VCD/SVCD, turn PBC (Playback  
Control) on or off in PBC mode.  
EN  
7
d v V b B (Navigation buttons)  
m AUDIO/CREATE MP3  
• Navigate through the menus.  
• Select an audio language/channel.  
• Access the menu to create MP3.  
• Search fast-forward (B) or fast-  
backward (b). Press repeatedly to  
change the search speed.  
n x (Stop)  
• Stop disc play.  
• Search slow-forward (v) or slow-  
backward (V). Press repeatedly to  
change the search speed.  
o u (Play/Pause)  
• Start, pause or resume disc play.  
e BACK  
p
INFO  
• Return to the previous display menu.  
• For DVD, navigate to the title menu.  
• For disc, display the current status or  
disc information.  
• For VCD version 2.0 or SVCD with  
PBC turned on, return to the menu.  
• For slideshows, display a thumbnail view  
of photo les.  
f /(Previous/Next)  
q OK  
• Conrm an entry or selection.  
r SETUP  
• Access or exit the setup menu.  
• Skip to the previous or next title,  
chapter, or track.  
• Press and hold for fast-backward or  
fast-forward search.  
g
(USB)  
• Switch to USB mode and display the  
content.  
h Numeric buttons  
• Select an item to play.  
i SUBTITLE  
• Select DVD or DivX subtitle language.  
• Access the menu to USB copy or USB  
delete.  
j , ZOOM  
• Fit the picture format to the TV screen.  
• Zoom in or out of the picture.  
k VOCAL  
• Change the audio channel of a karaoke  
disc.  
l KARAOKE  
• Access or exit the karaoke menu.  
8
EN  
3 Connect  
Make the following basic connections to use the  
DVD player.  
Note  
You must connect this DVD player directly to a TV.  
Option 1: Connect to component  
video jacks  
Basic connections:  
Video cables  
Audio cables  
Optional connections:  
Audio to other devices:  
• Multi channel receiver  
• Digital amplier/receiver  
• Analog stereo system  
Pb  
Pr  
Pb  
Y
Y
Pr  
COMPONENT  
VIDEO IN  
COMPONENT VIDEO OUT  
Note  
1 Connect the component video cables (not  
supplied) to the Y Pb Pr jacks on this DVD  
player and the component video input  
jacks on the TV.  
Refer to the type plate at the rear or bottom of the  
product for identication and supply ratings.  
Before you make or change any connections, ensure  
that all the devices are disconnected from the power  
outlet.  
• If a progressive scan TV is used, you  
may turn on the progressive scan mode  
(see chapter ‘Turn on Progressive Scan’  
for details).  
Tip  
Different types of connectors may be used to  
connect this product to your TV, depending on  
availability and your needs. A comprehensive  
interactive guide to help you connect your product is  
Tip  
The component video input jacks on the TV may be  
labeled as Y Pb/Cb Pr/Cr or YUV.  
This type of connection provides good picture  
quality.  
Connect video cables  
Connect this DVD player to the TV to view  
disc play.  
Select the best video connection that the TV can  
support.  
Option 1: Connect to component video  
jacks (for a standard TV or Progressive Scan  
TV).  
Option 2: Connect to video (CVBS) jack  
(for a standard TV).  
EN  
9
Option 2: Connect to video (CVBS)  
jack  
Route audio to other devices  
Route the sound from this DVD player to other  
devices to enhance audio play.  
VIDEO IN  
Connect to multi channel receiver  
1 Connect a composite video cable  
(supplied) to the TV OUT jack on this  
DVD player and the video input jack on  
the TV.  
MULTI CHANNEL  
AUDIO IN  
FRT L AR L  
NTER  
SWOOFER  
AR R  
FNT R  
Tip  
The video input jack on the TV may be labeled as  
A/V IN, VIDEO IN, COMPOSITE or BASEBAND.  
FRON
FRONT R  
CENT
REA
This type of connection provides standard picture  
quality.  
REAR R SUBWOOFER  
1 Connect the audio cables (not supplied) to  
the AUDIO OUT (FRONT L/R, REAR  
L/R, CENTER and SUBWOOFER) jacks  
on this DVD player and the audio input  
jacks on the device.  
Connect audio cables  
Connect the audio from this DVD player to the  
TV to allow sound output through the TV.  
AUDIO IN  
Tip  
You can optimize the audio output (see chapter  
‘Adjust settings’ - [ Audio Setup ] > [ Analog Output  
]) for details.  
1 Connect the audio cables (supplied) to the  
AUDIO OUT L/R jacks on this DVD  
player and the audio input jacks on the TV.  
10 EN  
Connect to digital amplier/receiver  
Connect USB device  
DIGITAL IN  
DIGITAL  
OUT  
COAXIAL  
1 Connect a coaxial cable (not supplied) to  
the COAXIAL/DIGITAL OUT jack on this  
DVD player and the COAXIAL/DIGITAL  
input jack on the device.  
1 Connect the USB ash drive to the  
(USB) jack on this DVD player.  
Note  
This DVD player can only play/view MP3, WMA,  
DivX or JPEG les that are stored on such devices.  
Tip  
You can optimize the audio output (see chapter  
‘Adjust settings’ - [ Audio Setup ] > [ Digital Audio  
]) for details.  
Press  
to access the content and play the les.  
Connect to power outlet  
Connect to analog stereo system  
Warning  
AUDIO IN  
Risk of product damage! Ensure that the power  
supply voltage corresponds to the voltage printed on  
the back or the underside of the DVD player.  
1 Connect the power cord to the power  
outlet.  
The DVD player is ready to be set up  
for use.  
1 Connect the audio cables (supplied) to the  
AUDIO OUT L/R jacks on this DVD  
player and the audio input jacks on the  
device.  
Tip  
You can optimize the audio output (see chapter  
‘Adjust settings’ - [ Audio Setup ] > [ Analog Output  
]) for details.  
EN 11  
Navigate through the menu  
4 Get started  
1 Point the remote control directly at the  
remote sensor on this DVD player and  
select the desired function.  
Prepare the remote control  
1 Push to open the battery compartment  
2 Use the following buttons on the remote  
control to navigate through the on-screen  
menus.  
cover.  
2 Insert two R03 or AAA type batteries with  
correct polarity (/) as indicated.  
Button  
Action  
Move up or down.  
3 Close the battery compartment.  
v V  
Caution  
Move left or right.  
Conrm a selection.  
Enter numbers.  
b B  
Remove batteries if they are exhausted or if the  
remote control is not to be used for a long time.  
OK  
Do not mix batteries (old and new or carbon and  
alkaline, etc.).  
Batteries contain chemical substances. They should  
be disposed off properly.  
12 EN  
Find the correct viewing  
channel  
Select menu display language  
1 Press SETUP.  
[ General Setup ] menu is displayed.  
1 Press to turn on the DVD player.  
2 Select [ OSD Language ], then press B.  
2 Turn on the TV and switch to the correct  
video-in channel.  
General Setup  
• You may go to the lowest channel on  
the TV, then press the Channel Down  
button on the TV remote control until  
you see the Video In channel.  
Disc Lock  
English  
OSD Language  
Sleep Timer  
Auto Standby  
• You may press button repeatedly  
DivX(R) VOD Code  
on the TV remote control.  
• Usually, this channel is between the  
lowest and highest channels and may  
be called FRONT, A/V IN, VIDEO, etc..  
• The language options are different  
depending on your country or region.  
It may not correspond to the illustration  
shown here.  
Tip  
See the TV user manual on how to select the correct  
input on the TV.  
3 Press vV to select a language, then press  
If the audio output of this DVD player is routed  
to other audio device (such as audio system  
or receiver), turn on the audio device to the  
appropriate audio input channel. Refer to the device  
user manual for details.  
OK.  
Tip  
You can set the default language for DVD audio  
and disc menu, see chapter ‘Adjust settings’ - [  
Preferences ] for details.  
EN 13  
7 You can now turn on the progressive scan  
Turn on Progressive Scan  
mode on the TV (see the TV user manual).  
Connect a progressive scan TV with  
component video jacks (see chapter ‘Connect  
video cables - Option 1: Connect to  
component video jacks’ for details).  
Note  
During play, when progressive scan mode is on for  
both this DVD player and the TV, distorted picture  
may display. Turn off the progressive scan feature on  
both this DVD player and the TV.  
1 Turn on the TV to the correct viewing  
channel for this DVD player.  
2 Press SETUP.  
3 Press V to select [ Video Setup ].  
4 Select [ Progressive ] > [ On ], then press  
OK.  
A warning message is displayed.  
Video Setup  
TV System  
On  
Off  
TV Display  
Progressive  
Picture Setting  
5 To proceed, select [ OK ] and press OK.  
The progressive setup is complete.  
Note  
If a blank/distorted screen is displayed, wait for 15  
seconds for the auto recover.  
If no picture is displayed, turn off the progressive  
scan mode as follows:  
1) Press Z to open the disc compartment.  
2) Press the numeric button ‘1’.  
6 To exit the menu, press SETUP.  
14 EN  
Tip  
5 Play  
If the password entry menu is displayed, you have to  
enter the password before it can be played.  
If you pause or stop a disc for about 5 minutes, the  
screen saver activates. To deactivate the screen  
saver, press DISC MENU.  
After you pause or stop a disc, if no buttons  
are pressed within 15 minutes, this DVD player  
automatically switches to standby mode.  
Play from disc  
Note  
DVDs and DVD players are designed with regional  
restrictions. Ensure that the DVD video you play is  
for the same region zone as the player (indicated on  
its back).  
This DVD player can support play of the following  
le formats: MP3/WMA/JPEG/DivX.  
To play DVD-R, DVD+R or DVD-RW, the disc must  
be nalized.  
Play a disc  
Caution  
Never place any objects other than discs into the  
disc compartment.  
1 Press Z to open the disc compartment.  
2 Insert a disc with its label facing up.  
• For double-sided disc, load the side to  
play faces up.  
3 Press Z to close the disc compartment  
and start disc play.  
• To view disc play, turn on the TV to  
the correct viewing channel for this  
DVD player.  
4 To stop disc play, press x.  
EN 15  
Change video play  
Play video  
1 Play a title.  
Note  
2 Use the remote control to change the  
For video disc, play always resumes from the point  
where it was last stopped. To start play from the  
video play.  
beginning, press while the message is displayed.  
Button  
Action  
Change audio language.  
AUDIO/  
CREATE MP3  
• Only applicable to discs  
with multiple audio  
Control a title  
language or channel.  
1 Play a title.  
2 Use the remote control to control the title.  
Change subtitle language.  
SUBTITLE  
• Only applicable to discs  
with multiple subtitle  
language.  
Button  
Action  
Start, pause or resume disc  
play.  
u
Fit the picture format to the  
TV screen.  
, ZOOM  
(Screen Fit)  
Stop disc play.  
x
• Press repeatedly until the  
image is scaled to t to  
the TV screen.  
Skip to the next title or  
chapter.  
Toggle between screen  
aspect ratio and different  
zoom factor.  
, ZOOM  
Skip to the beginning of the  
current title or chapter.  
• To pan through the  
zoomed image, press the  
navigation buttons.  
• Press twice to jump to the  
previous title or chapter.  
m, M  
Searches fast-forward (M)  
or fast-backward (m).  
Display the current status or  
disc information.  
INFO  
• Press repeatedly to change  
the search speed.  
• You can change the video  
play options here without  
interrupting disc play.  
v, V  
Searches slow-forward (v) or  
slow-backward (V).  
• Press repeatedly to change  
the search speed.  
Note  
• For VCD/SVCD, slow-  
backward search is not  
possible.  
Some operations may not work with some discs. See  
the information accompanying the disc for details.  
.
16 EN  
Access DVD menu  
Preview disc contents  
1 During play, press  
INFO.  
1 Press DISC MENU to access disc main  
menu.  
The disc status menu is displayed.  
2 Select a play option, then press OK.  
2 Select [ Preview ], then press B.  
DVD  
• In some menus, press the numeric  
buttons to input your selection.  
• To return to the title menu during play,  
Select Digest Type:  
press BACK.  
Title Digest  
Chapter Digest  
Title Interval  
Access VCD menu  
Chapter Interval  
The PBC (Playback Control) for VCD/SVCD is  
turned on by default in the factory. When you  
load in a VCD/SVCD, the contents menu is  
displayed.  
VCD/SVCD  
Select Digest Type:  
1 Press numeric buttons to select a play  
option, then press OK to start play.  
Track Digest  
Disc Interval  
Track Interval  
• If PBC is off, it skips the menu and starts  
play from the rst track.  
• During play, you can press BACK to  
return to the menu (if the PBC mode is  
on).  
3 Select a preview option, then press OK.  
A six thumbnails preview screen is  
displayed.  
Tip  
• To go to the next/previous preview  
The default setting for PBC is on. You can change the  
default setting, see chapter ‘Adjust settings’ -  
[ Preferences ] > [ PBC ] for details.  
screen, press /.  
• To start play, press OK at the selected  
thumbnail picture.  
EN 17  
Quick skip play to a specic time  
View DVD play from different angles  
1 During play, press  
INFO.  
1 During play, press  
INFO.  
The disc status menu is displayed.  
The disc status menu is displayed.  
2 Select the current elapsed playing time,  
2 Select [ Angle ], then press B.  
then press B.  
3 Press the numeric buttons to change the  
[ TT Time ] (title time)  
[ CH Time ] (chapter time)  
[ Disc Time ] (disc time)  
[ Track Time ] (track time)  
angle.  
Play changes to the selected angle.  
Note  
3 Press the numeric buttons to change the  
Only applicable to discs contain sequences recorded  
from different camera angles.  
time where you want to skip to.  
Display play time  
Repeat play - video  
1 During play, press  
INFO.  
The disc status menu is displayed.  
For DVD/VCD/SVCD  
2 Select [ Time Disp ], then press B.  
1 During play, press  
INFO.  
The display options are different  
depending on the disc type.  
The disc status menu is displayed.  
2 Select [ Repeat ] in the menu, then press  
B.  
Option  
Action  
3 Press vV to select a repeat option, then  
[ Title Elapsed ] Display DVD title or chapter  
press OK.  
/ [ Chapter  
Elapsed ]  
elapsed play time.  
[ Title Remain ] Display DVD title or chapter  
Note  
/ [Chapter  
Remain ]  
remaining play time  
For VCD/SVCD, repeat play is only possible if PBC  
mode is turned off.  
[ Total Elapsed Display VCD/SVCD disc or  
] / [Single  
Elapsed ]  
track elapsed play time.  
[ Total Remain Display VCD/SVCD disc or  
] / [Single  
Remain ]  
track remaining play time.  
3 Select an option, then press OK.  
18 EN  
Set repeat play for a specic section  
Play DivX® video  
DivX video is a digital media format that retains  
high quality despite a high rate of compression.  
This DVD player is DivX® Certied so that  
you can enjoy DivX video.  
1 During play, press  
INFO.  
The disc status menu is displayed.  
2 Select [ Repeat AB ] in the menu, then  
press OK at the start point.  
1 Insert a disc or USB that contains the DivX  
2 Press OK again to set the end point.  
videos.  
Repeat play starts.  
• For USB, press  
.
3 To cancel repeat play, press OK again.  
A contents menu is displayed.  
2 Select a title to play, then press OK.  
Note  
3 Use the remote control to control the  
The marked section for repeat play is only possible  
within a title or track.  
title.  
Button  
Action  
Changes subtitle language.  
SUBTITLE  
Changes audio language/  
channel.  
AUDIO/  
CREATE MP3  
Stops disc play.  
x
• The contents menu is  
displayed.  
Display title elapsed play  
time or title remaining play  
time.  
INFO  
Note  
You can only play DivX videos that were rented or  
purchased with the DivX registration code of this  
DVD player (see chapter ‘Adjust settings’ - [ General  
Setup ] > [ DivX(R) VOD Code ] for details).  
If the subtitle does not appear correctly, change the  
subtitle language (see chapter ‘Adjust settings’ -  
[ Preferences ] > [ DivX Subtitle ] for details).  
EN 19  
Quick skip play  
Play music  
1 During play, press  
INFO until one of  
the following options is selected.  
Note  
For some commercial audio disc, play may resume  
from the point where it was last stopped. To start  
Display  
Action  
play from rst track, press .  
[ Disc Go  
To ]  
Skip play to a specic time  
within the disc.  
[ Track Go  
To ]  
Skip play to a specic time  
within a track  
Control a track  
1 Play a track.  
[ Select  
Track ]  
Skip play to a specic track  
number.  
2 Use the remote control to control the  
track.  
2 Press the numeric buttons to change the  
time/number where you want to skip to.  
Button  
Action  
Start, pause or resume disc  
play.  
u
Repeat play - audio  
Stop disc play.  
x
For audio CD  
Skip to the next track.  
1 During play, press  
INFO repeatedly  
until [ Off ] is selected.  
Skip to the beginning of the  
current track. Press twice to  
jump to the previous track.  
2 Press b B to select a repeat option.  
For MP3/WMA les  
Select an item to play.  
1 During play, press  
INFO to select a  
repeat option.  
m, M  
Searches fast-forward (M)  
or fast-backward (m).  
• Press repeatedly to change  
the search speed.  
20 EN  
Play MP3/WMA music  
Play photo  
MP3/WMA is a type of highly compressed  
audio le (les with .mp3, .wma extensions).  
Play photos as slideshow  
1 Insert a disc or USB that contains the MP3/  
WMA music.  
This DVD player can play JPEG photos (les  
with .jpeg or .jpg extensions).  
• For USB, press  
.
A contents menu is displayed.  
Play starts.  
1 Insert a disc or USB that contains the JPEG  
photos.  
2 Select a track to play if play does not start  
• For USB, press  
.
automatically.  
For a Kodak disc, the slideshow begins  
automatically.  
• To select another track/folder, press  
vV, then press OK.  
For a JPEG disc, the photo menu is  
displayed.  
3 To return to the main menu, press v until  
the root menu is selected, then press OK.  
2 Select the folder/album you want to play.  
• To preview the photos in the folder/  
Note  
album, press  
INFO.  
For CDs recorded in multiple sessions, only the rst  
session is played.  
This DVD player does not support MP3PRO audio  
format.  
If any special characters are present in the MP3  
track name (ID3) or album name, it may not display  
correctly on the screen because these characters are  
not supported.  
Some WMA is protected by Digital Rights  
Management (DRM), it cannot be played on this  
DVD player.  
Folders/les exceed the supported limit of this DVD  
player are not displayed or played.  
• To go to previous or next screen  
Tip  
display, press /.  
You can display the data disc contents without  
folders, see chapter ‘Adjust settings’ - [ Preferences ]  
> [ Mp3/Jpeg Nav ] for details.  
• To select a photo, press the navigation  
buttons.  
• To display the selected photo only,  
press OK.  
3 Press OK to start slideshow play.  
• To return to the menu, press BACK.  
EN 21  
Note  
Play musical slideshow  
You may require longer time to display the disc  
content on the TV due to the large number of songs/  
photos compiled onto one disc.  
Play MP3/WMA music les and JPEG photo  
les simultaneously to create musical slideshow.  
The MP3/WMA and JPEG les must be stored  
on the same disc.  
If the JPEG photo is not recorded with an ‘exif’ type  
le, the actual thumbnail picture is not be shown  
on the display. It is replaced by a ‘blue mountain’  
thumbnail picture.  
1 Play MP3/WMA music.  
This DVD player can only display digital camera  
pictures according to the JPEG-EXIF format, typically  
used by almost all digital cameras. It cannot display  
Motion JPEG and pictures in formats other than  
JPEG, or sound clips associated with pictures.  
2 Navigate to the photo folder/album and  
press OK to start slideshow play.  
Slideshow begins and continues till the  
end of the photo folder or album.  
Folders/les exceed the supported limit of this DVD  
player are not displayed or played.  
Audio continues to play till the end of  
the disc.  
• To return to the menu, press BACK.  
Control photo play  
3 To stop slideshow play, press x.  
4 To stop music play, press x again.  
1 Play photo slideshow.  
2 Use the remote control to control the  
photo.  
Button  
Action  
Rotate the photo anti-  
clockwise.  
b
Rotate the photo clockwise.  
Flip the photo vertically.  
Flip the photo horizontally.  
B
v
V
Zoom in/ out.  
, ZOOM  
• Play pause in zoom mode.  
Stop disc play.  
x
22 EN  
Play from USB device  
This DVD player plays/views MP3, WMA, DivX  
or JPEG les that are stored on USB device.  
1 Connect a USB ash drive to the  
(USB) jack on this DVD player.  
2 Press  
.
A contents menu is displayed.  
Play starts.  
3 Select a le to play if play does not start  
automatically.  
• For more information, see chapters  
‘Play music, Play photo, Play video’ for  
details.  
4 To stop play, press x or remove the USB  
device.  
• To switch to the disc mode, press  
or DISC MENU.  
Tip  
If the device does not t into the USB jack, connect it  
through a USB extension cable.  
Digital cameras that require additional programme  
installation when connected to a PC are not  
supported.  
EN 23  
Note  
6 Advanced  
features  
While you copy, never press any buttons.  
Copy-protected media cannot be copied.  
Create MP3 les  
Media copy  
You can convert audio CDs into MP3 audio  
les with this DVD player. The created MP3  
audio les are saved in the USB device.  
You can transfer data les such as MP3, WMA  
or JPEG from disc to the USB device.  
1 Insert an audio CD.  
1 Insert a disc that contains the MP3/WMA/  
JPEG les.  
2 Connect the USB ash drive to  
(USB)  
jack on this DVD player.  
2 Press x to stop disc play.  
3 During disc play, press AUDIO/CREATE  
3 Connect the USB ash drive to the  
MP3.  
(USB) jack on this DVD player.  
4 Select [ Yes ] in the menu and press OK.  
4 Select the le to copy, then press  
SUBTITLE.  
Create MP3  
TRACK  
OPTIONS  
5 Select [ Yes ] in the menu to start to copy,  
Track01  
04:14  
04:17  
03:58  
04:51  
03:53  
04:09  
04:38  
then press OK.  
Speed  
Normal  
128kbps  
Yes  
Track02  
Track03  
Track04  
Track05  
Track06  
Track07  
Bitrate  
00:00/00:00  
\MP3  
005/030  
CRT ID3  
Device  
USB 1  
Previous  
Summary  
Track 1  
Track 2  
Track 3  
Track 4  
Track 5  
Track 6  
Track 7  
Press [OK] button  
to change speed.  
Do you want  
to copy this file  
Select all  
Start  
Exit  
Deselect all  
Yes  
No  
5 Select the conversion options in the  
[ OPTIONS ] panel and press OK.  
Once complete, a new folder is created  
automatically in the USB device to store  
all the new data les.  
6 To stop copy progress, press x, then  
press OK.  
24 EN  
Option  
Description  
Select the write-to-le speed.  
[ Speed ]  
• If [ Normal ] speed is  
selected, music play can be  
heard while creating the  
MP3 le.  
Select the quality level.  
[ Bitrate ]  
Higher bitrate for better sound  
quality and bigger le size.  
• Default setting is [ 128  
kbps ].  
Copy track information into  
the MP3 le.  
[ CRT ID3 ]  
[ Device ]  
• Default setting is [ Yes ].  
The created MP3 les can  
only be saved in USB device.  
6 Press B to access the [ TRACK ] panel.  
7 Select the audio track, then press OK.  
• To select another track, repeat step 7.  
• To select all tracks, select [ Select all ]  
in the menu and press OK.  
• To deselect all tracks, select [ Deselect  
all ] in the menu and press OK.  
8 Select [ Start ] in the menu to start to  
convert, then press OK.  
Once complete, a new folder is created  
automatically in the USB device to store  
all the new MP3 les.  
• To exit the menu, select [ Exit ] and  
press OK.  
Note  
While you convert, never press any buttons.  
DTS CDs and copy-protected CDs cannot be  
converted.  
Write-protected or password-protected USB  
devices cannot be used to store MP3 les.  
EN 25  
[ Karaoke Scoring ]: Select a karaoke rating  
score level.  
7 Adjust sound  
[ Off ] – no score rating display.  
[ Basic ] – basic rating.  
[ Intermediate ] – intermediate rating.  
[ Advance ] – advance rating.  
Karaoke settings  
Note  
A karaoke score is displayed at the end of the song.  
Press OK to exit and resume karaoke session.  
Karaoke score function is only available for DVD and  
VCD discs.  
Set the microphone volume to the minimum level  
before connecting the microphone to prevent  
howling.  
Turn off vocal (cancel voice)  
1 Turn on the TV to the correct viewing  
channel for this DVD player.  
2 Connect a microphone (not supplied) to  
MIC jack on this DVD player.  
3 Press KARAOKE repeatedly to access  
various setting options.  
1 Press VOCAL repeatedly to toggle  
through various audio modes or turn off  
the vocal.  
[ MIC ]: Press b B to turn on or off  
microphone output.  
[ Vol ]: Press b B to set the microphone  
volume level.  
Note  
You cannot cancel the voice output from MP3 discs.  
[ Echo ]: Press b B to set the echo level.  
[ Key ]: Press b B to set the pitch level that  
match your voice.  
26 EN  
4 Select a setting, then press OK.  
8 Adjust settings  
This section describes the various setting  
options of this DVD player.  
• To return to the previous menu, press  
b.  
• To exit the menu, press SETUP.  
Symbol  
Option  
Note  
[ General Setup ]  
See the explanations of the above options in the  
following pages.  
[ Audio Setup ]  
[ Video Setup ]  
[ Preferences ]  
[ Disc Lock ]  
Set play restriction for a specic disc.  
Before you start, place the disc in the disc  
compartment (maximum 20 discs can be  
locked).  
[ Lock ] – restrict access to the current  
disc. The next time you want to play  
this disc or unlock it, you need to enter  
the password.  
Note  
[ Unlock ] – play all discs.  
If the setup option is grayed out, it means the setting  
cannot be changed at the current state.  
Tip  
To set or change the password, go to  
[ Preferences ] > [ Password ].  
General setup  
1 Press SETUP.  
[ OSD Language ]  
Select the default on-screen menu  
language.  
[ General Setup ] menu is displayed.  
2 Press B.  
[ Sleep Timer ]  
3 Select an option, then press OK.  
Switch to standby automatically after the  
preset time.  
General Setup  
[ Off ] – disable sleep mode.  
Disc Lock  
[ 15 Mins ], [ 30 Mins ],  
OSD Language  
Sleep Timer  
[ 45 Mins ], [ 60 Mins ] – select the  
count down time before the DVD  
player switches to standby.  
Auto Standby  
DivX(R) VOD Code  
EN 27  
[ Auto Standby ]  
Audio setup  
1 Press SETUP.  
Turn off or on automatic standby switching  
mode. It is an energy saving feature.  
[ On ] – switch to standby after 15  
minutes of inactivity (for example, in  
pause or stop mode).  
[ General Setup ] menu is displayed.  
2 Press V to select [ Audio Setup ], then  
[ Off ] – disable auto standby mode.  
press B.  
3 Select an option, then press OK.  
[ DivX(R) VOD Code ]  
Display the DivX® registration code.  
Audio Setup  
Tip  
Analog Output  
Digital Audio  
Enter this DVD player’s DivX registration code when  
The DivX videos rented or purchased through the  
DivX® VOD (Video On Demand) service can be  
played only on the device to which it is registered.  
Volume  
Sound Mode  
Speaker Setup  
CD Upsampling  
Night Mode  
4 Select a setting, then press OK.  
• To return to the previous menu, press  
b.  
• To exit the menu, press SETUP.  
Note  
See the explanations of the above options in the  
following pages.  
28 EN  
[ Analog Output ]  
Note  
Select the analog audio setting based on  
the audio device that is connected through  
the analog audio jack.  
[ LPCM Output ] setting is only available if the  
[ Digital Output ] is set to [ PCM only ].  
The higher the sampling rate, the better the sound  
quality.  
[ Stereo ] – for stereo output.  
[ LT/RT ] – for surround sound output  
through two speakers.  
[ Volume ]  
[ Multi Channel ] - for multi channel  
Set the default volume level when you play  
a disc.  
output.  
1. Press OK.  
[ Digital Audio ]  
2. Press b B to set the volume.  
3. Press OK to conrm and exit.  
Select the setting based on the digital  
amplier/receiver that is connected  
through the digital jack.  
[ Sound Mode ]  
[ Digital Output ] – select the type of  
Select a preset sound effect to enhance  
the audio output.  
digital output.  
Option  
[ Off ]  
Description  
[ 3D ] – select a virtual surround sound  
effect that is produced from the left and  
right audio channels.  
Disable digital output.  
[ All ]  
The device supports  
multi-channel audio  
formats.  
[ Movie Mode ] – select a sound effect  
for movies.  
[ Music Mode ] – select a sound effect  
[ PCM Only ]  
The device is not capable  
of decoding multi-channel  
audio. Audio is  
for music.  
downmixed to two-  
channel sound: see [  
LPCM Output ] setting.  
[ LPCM Output ] – select the LPCM  
(Linear Pulse Code Modulation) output  
sampling rate.  
Option  
Description  
[ 48kHz ]  
For discs recorded at  
sampling rate of 48 kHz.  
[ 96kHz ]  
For discs recorded at the  
sampling rate of 96 kHz.  
EN 29  
[ Speaker Setup ]  
[ Speakers Delay ] – Set the delay time  
for the center, subwoofer and rear  
speakers if they are placed closer to the  
listening position, so that the sound  
output from all speakers reach the  
listening position at the same time.  
When you connect a speaker system, you  
can optimize surround output for the  
connected speakers.  
[ Front Speaker ]  
Option  
Description  
1. Press OK.  
[ Large ]  
Produce low frequency  
signal below 120 Hz.  
2. Select a speaker, then press b B to  
set the delay time.  
[ Small ]  
Cannot produce low  
frequency signal below  
120 Hz.  
3. Press OK to conrm and exit.  
Note  
[ Speaker Setup ] setting is only available if you have  
[ Center Speaker ] / [ Rear Speakers ]  
set the [ Analog Output ] setting to [ Multi Channel  
].  
Option  
Description  
[ Large ]  
Produce low frequency  
signal below 120 Hz.  
[ CD Upsampling ]  
For better sound quality in stereo mode,  
convert the music CD to a higher sampling  
rate.  
[ Small ]  
Cannot produce low  
frequency signal below  
120 Hz.  
[ Off ] – turn off CD-upsampling.  
[ Off ]  
No speaker is connected.  
[ 88.2kHz ] – convert to twice the  
original sampling rate.  
[ Subwoofer ]  
[ 176.4kHz ] – convert to four times  
Option  
[ On ]  
Description  
the original sampling rate.  
A subwoofer is  
connected.  
[ Night Mode ]  
[ Off ]  
No subwoofer is  
connected.  
You can play DVDs with Dolby Digital  
mode at a low volume, without disturbing  
others. High volume output is decreased  
and low volume output is increased to an  
audible level.  
[ Speakers Volume ] – Set the volume  
level of each speaker to get the ideal  
audio balance.  
[ On ] – turn on night mode.  
[ Off ] – enjoy surround sound with its  
1. Press OK.  
full dynamic range.  
2. Select a speaker, then press b B to  
adjust the volume.  
3. Press OK to conrm and exit.  
30 EN  
[ TV Display ]  
Video setup  
1 Press SETUP.  
Select the screen format according to how  
you want the picture to appear on the TV.  
[ General Setup ] menu is displayed.  
2 Press V to select [ Video Setup ], then  
4:3 Pan Scan (PS)  
4:3 Letter Box (LB)  
16:9 (Wide Screen)  
press B.  
3 Select an option, then press OK.  
[ 4:3 Pan Scan ] – for standard TV, a  
full-height screen display with the sides  
trimmed.  
Video Setup  
[ 4:3 Letter Box ] – for standard TV, a  
‘wide-screen’ display with black bars on  
the top and bottom.  
TV System  
TV Display  
Progressive  
Picture Setting  
[ 16:9 ] – for wide-screen TV (frame  
ratio 16:9).  
[ Progressive ]  
If a progressive scan TV is connected to  
the DVD player, turn on progressive scan  
mode.  
4 Select a setting, then press OK.  
• To return to the previous menu, press  
[ On ] – turn on progressive scan  
b.  
mode.  
• To exit the menu, press SETUP.  
[ Off ] – disable progressive scan mode.  
Tip  
Note  
There is more detailed description available. See  
chapter ‘Get Started - Turn on Progressive Scan’ for  
details.  
See the explanations of the above options in the  
following pages.  
[ TV System ]  
[ Picture Setting ]  
If the video does not appear correctly,  
change the setting. By default, this setting  
matches the most common setting for TVs  
in your country.  
Select a predened set of picture color  
settings or customize the personal setting.  
[ Standard ] – original color setting.  
[ Bright ] – vibrant color setting.  
[ Soft ] – warm color setting.  
[ PAL ] – for PAL-system TV.  
[ Multi ] – for TV that is compatible  
with both PAL and NTSC.  
[ Personal ] – customize the color  
setting. Set the level of brightness,  
contrast, tint and color saturation, then  
press OK.  
[ NTSC ] – for NTSC-system TV.  
EN 31  
Note  
Preferences  
1 Press SETUP.  
If the language you have set is not available on the  
disc, the disc uses its own default language.  
For some DVDs, the subtitle/audio language can only  
change from the disc menu.  
[ General Setup ] menu is displayed.  
To select the languages that are not listed in the  
menu, select [ Others ]. Then check the Language  
Code list at the back of this user manual and enter  
the respective language code.  
2 Press V to select [ Preferences ] , then  
press B.  
3 Select an option, then press OK.  
[ Parental Control ]  
Preferences  
Restricts access to DVDs that are  
unsuitable for children. These types of  
DVDs must be recorded with ratings.  
Audio  
Subtitle  
Disc Menu  
1. Press OK.  
Parental Control  
PBC  
2. Select a rating level, then press OK.  
Mp3/Jpeg Nav  
Password  
3. Press the numeric buttons to enter  
the password.  
DivX Subtitle  
Note  
4 Select a setting, then press OK.  
Rated DVDs above the level you set in [ Parental  
Control ] require a password to be played.  
• To return to the previous menu, press  
The ratings are country-dependent. To allow all discs  
b.  
to play, select ‘8’.  
• To exit the menu, press SETUP.  
Some DVDs have ratings printed on them but are  
not recorded with ratings. This function has no  
effect on such DVDs.  
Note  
Stop disc play before you can access to [Preferences].  
See the explanations of the above options in the  
following pages.  
Tip  
You can set or change the password, go to  
[ Preferences ] > [ Password ].  
[ Audio ]  
Select the default audio language for  
DVDs.  
[ PBC ]  
For VCDs/SVCDs recorded with PBC  
(playback control), you can access the disc  
content through an interactive menu.  
[ Subtitle ]  
Select the default subtitle language for  
DVDs.  
[ On ] – an index menu is displayed  
when you load a disc for play.  
[ Disc Menu ]  
[ Off ] – skip the menu and start play  
from the rst track.  
Select the menu language for DVDs.  
32 EN  
[ DivX Subtitle ]  
[ Mp3/Jpeg Nav ]  
Select a character set that supports the  
DivX subtitle.  
Select to display the folders or display all  
the les.  
[ View Files ] – display all the les.  
Simplied Chinese  
[
]
[ View Folders ] – display the folders of  
Note  
MP3/WMA les.  
Ensure that the subtitle le has the exact same le  
name as the movie le. If for example the le name  
of the movie is ‘Movie.avi’, then you will need to  
name the text le ‘Movie.sub’ or ‘Movie.srt’.  
[ Password ]  
Follow the instructions on the TV to set or  
change the password for locked discs and  
play restricted DVDs.  
[ Version Info ]  
Preferences  
Change password  
Displays the software version of this DVD  
player.  
Old Password  
New Password  
This information is required when you  
want to nd out if the newest software  
version is available at the Philips website  
that you may download and install on this  
DVD player.  
Confirm PWD  
OK  
[ Default ]  
Resets all the settings of this DVD player  
to factory default, except for [ Disc Lock ],  
[ Parental Control ] and [ Password ]  
settings.  
1. Press the numeric buttons to enter  
‘136900’ or the last set password at [  
Old Password ] eld.  
2. Enter the new password at [ New  
Password ] eld.  
3. Enter the new password again at  
[ Conrm PWD ] eld.  
4. Press OK to exit the menu.  
Note  
If you forget the password, enter ‘136900’ before  
you set a new password.  
EN 33  
the latest software version, using the le  
name for this DVD player.  
9 Additional  
information  
5 Refer to the upgrade instructions for more  
information.  
Note  
Update software  
Disconnect the power cord for a few seconds and  
connect again to reboot the system.  
To check for updates, compare the current  
software version of this DVD player with the  
latest software version (if available) at the  
Philips website.  
Care  
Caution  
Caution  
Power supply must not be interrupted during  
software upgrade.  
Never use solvents such as benzene, thinner,  
cleaners available commercially, or anti-static sprays  
intended for discs.  
1 Press SETUP.  
Preferences  
Clean discs  
Wipe the disc with a micro bre cleaning cloth  
from the center to the edge in a straight line  
movement.  
Disc Menu  
Parental Control  
PBC  
Mp3/Jpeg Nav  
Password  
DivX Subtitle  
Version Info  
Default  
2 Select [ Preferences ] > [ Version Info ],  
then press OK.  
3 Write down the le name, then press  
SETUP to exit the menu.  
34 EN  
Audio performance  
10 Specication  
• DA converter: 24 bits, 192 kHz  
• Frequency response:  
DVD: 4 Hz - 22 kHz (48 kHz);  
4 Hz - 44 kHz (96 kHz)  
SVCD: 4 Hz - 20 kHz (44.1 kHz);  
4 Hz - 22 kHz (48 kHz)  
Note  
Specication and design are subject to change  
without notice.  
CD/VCD: 4 Hz - 20 kHz (44.1 kHz)  
• Signal-Noise (1 kHz): > 90 dB (A-weighted)  
• Dynamic range (1 kHz): > 80 dB (A-weighted)  
• Crosstalk (1 kHz): > 70 dB  
• Distortion/noise (1 kHz): > 65 dB  
• MPEG MP3: MPEG Audio L3  
Accessories supplied  
• Remote control and batteries  
• Audio/video cables  
Playback media  
Audio format  
• DVD-Video, Video CD/SVCD, Audio CD, CD-R/  
CD-RW, DVD+R/+RW, DVD-R/-RW, DivX-CD,  
Picture CD, MP3-CD, WMA-CD, USB ash drive  
• Digital:  
MPEG/AC-3/PCM: Compressed digital (16, 20, 24  
bits fs, 44.1, 48, 96 kHz)  
MP3 (ISO 9660): 96, 112, 128, 256 kbps &  
variable bit rate fs, 32, 44.1, 48 kHz  
USB  
• Analog sound stereo  
• Dolby surround compatible downmix from Dolby  
Digital multi-channel sound  
• Compatibility: Hi-Speed USB (2.0)  
• Class support: UMS (USB Mass Storage Class)  
TV standard  
• Number of lines:  
Connections  
• Y Pb Pr output: Cinch 3x  
• Video output: Cinch (yellow)  
• Audio output (L+R): Cinch (white/red)  
• Digital output:  
625 (PAL/50Hz); 525 (NTSC/60Hz)  
• Playback: Multi-standard (PAL/NTSC)  
Video performance  
1 coaxial: IEC60958 for CDDA/LPCM;  
IEC61937 for MPEG 1/2, Dolby Digital  
• 5.1 channel analog output  
• Video DAC: 12 bits, 108 MHz  
• Y Pb Pr: 0.7 Vpp ~ 75 ohm  
• Video output: 1 Vpp ~ 75 ohm  
Audio Front L + R: Cinch (white/red)  
Audio Rear L + R: Cinch (white/red)  
Audio Center: Cinch (blue)  
Video format  
• Digital compression:  
Audio Subwoofer: Cinch (black)  
MPEG 2: DVD/SVCD  
MPEG 1: VCD/DivX  
Main unit  
• Horizontal resolution:  
• Dimensions (w x h x d): 360 x 37 x 209 (mm)  
• Net Weight: approximately 1.3 kg  
DVD: 720 pixels (50 Hz); 720 pixels (60 Hz)  
VCD: 352 pixels (50 Hz); 352 pixels (60 Hz)  
• Vertical resolution:  
Power  
DVD: 576 lines (50 Hz); 480 lines (60 Hz)  
VCD: 288 lines (50 Hz); 240 lines (60 Hz)  
• Power supply rating: 110 V - 240V; 50/60 Hz  
• Power consumption: < 10 W  
• Power consumption in standby mode: < 1 W  
Laser Specication  
• Type: Semiconductor laser InGaAIP (DVD), AIGaAs  
(CD)  
• Wave length: 658 nm (DVD), 790 nm (CD)  
• Output Power: 7.0 mW (DVD), 10.0 mW (VCD/CD)  
• Beam divergence: 60 degrees  
EN 35  
If this happens when you turn on the  
progressive scan setting or change the TV  
system setting, you have to switch to its  
default mode:  
11 Troubleshooting  
Warning  
1. Press Z to open the disc compartment.  
2. Press the numeric button ‘1’ (for  
progressive scan) or the numeric  
button ‘3’ (for TV System).  
Risk of electric shock. Never remove the casing of  
this unit.  
To keep the warranty valid, never try to repair  
the system yourself.  
Sound  
If you encounter problems when using this  
DVD player, check the following points before  
requesting service. If the problem remains  
unsolved, register your product and get support  
No sound.  
Ensure that the audio cables are connected  
and the connected device is turned on to  
the correct input source.  
If you contact philips, you will be asked for the  
model and serial number of your DVD player.  
The model number and serial number are on  
the back or bottom of your DVD player. Write  
the numbers here:  
No sound during DivX movies play.  
The audio codec may not be supported by  
this DVD player.  
Model No. __________________________  
Serial No. ___________________________  
Play  
DivX video les cannot be played.  
Ensure that the DivX video le is complete.  
Ensure that the le name extension is  
correct.  
Main unit  
The aspect ratio of the screen is not aligned  
with the TV display setting.  
The buttons on this DVD player do not work.  
Disconnect this DVD player from the  
power outlet for a few minutes, then  
connect again.  
The aspect ratio is xed on the DVD.  
DivX subtitle are not displayed correctly.  
Ensure that the subtitle le name is the  
same as the movie le name.  
Select the correct character set.  
Picture  
No picture.  
1. Press SETUP.  
See TV manual for correct video input  
channel selection. Change the TV channel  
until you see the DVD screen.  
2. Select [ Preferences ] > [ DivX  
Subtitle ] in the menu.  
3. Select the character set that supports  
the subtitle.  
36 EN  
The contents of the USB ash drive cannot be  
read.  
The USB ash drive format is not  
compatible with this DVD player.  
Drive is formatted with different le system  
which is not supported by this DVD player  
(e.g. NTFS).  
EN 37  
M
12 Glossary  
MP3  
A le format with a sound data compression  
system. ‘MP3’ is the abbreviation of Motion  
Picture Experts Group 1 (or MPEG-1) Audio  
Layer3. By using the MP3 format, one CD-R or  
CD-RW can contain about 10 times more data  
than a regular CD. Files are recognized by their  
le extension ‘.MP3’.  
A
Aspect ratio  
Aspect ratio refers to the length to height ratio  
of TV screens. The ratio of a standard TV is 4:3,  
while the ratio of a high-denition or wide TV is  
16:9. The letter box allows you to enjoy a  
picture with a wider perspective on a standard  
4:3 screen.  
P
PBC  
Playback Control. A system of navigating a  
Video CD/Super VCD through on-screen  
menus recorded onto the disc. You can enjoy  
interactive play and searching.  
D
DivX®  
The DivX code is a patent-pending, MPEG-4  
based video compression technology,  
developed by DivX Networks, Inc., that can  
shrink digital video to sizes small enough to be  
transported over the internet, while maintaining  
high visual quality.  
Progressive Scan  
The progressive scan displays twice the number  
of frames per second than ordinary TV system.  
It offers higher picture resolution and quality.  
W
WMA  
J
Windows Media™ Audio. Refers to an audio  
compression technology developed by  
Microsoft Corporation. WMA data can be  
encoded by using Windows Media Player  
version 9 or Windows Media Player for  
Windows XP. Files are recognized by their le  
extension ‘WMA’.  
JPEG  
A very common digital still picture format. A  
still-picture data compression system proposed  
by the Joint Photographic Expert Group, which  
features small decrease in image quality in spite  
of its high compression ratio. Files are  
recognised by their le extension ‘JPG or JPEG’.  
38 EN  
Language Code (语言代码表)  
Abkhazian  
Afar  
Afrikaans  
Amharic  
6566  
6565  
6570  
6577  
6582  
7289  
6583  
6569  
6589  
6590  
7783  
6665  
6669  
6678  
6672  
6673  
7866  
6683  
6682  
6671  
7789  
6983  
6765  
6772  
6769  
Inupiaq  
Irish  
Íslenska  
Italiano  
Ivrit  
Japanese  
Javanese  
Kalaallisut  
Kannada  
Kashmiri  
Kazakh  
Kernewek  
Khmer  
7375  
7165  
7383  
7384  
7269  
7465  
7486  
7576  
7578  
7583  
7575  
7587  
7577  
8287  
7589  
7586  
7579  
Pushto  
8083  
8285  
8185  
8277  
8279  
8278  
8377  
8371  
8365  
8367  
8382  
8378  
8381  
8368  
8373  
8373  
8376  
8379  
8384  
7882  
8385  
7073  
8387  
8383  
8386  
8476  
8489  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8483  
8478  
8482  
8475  
8487  
8571  
8575  
8582  
8590  
8673  
8679  
8765  
6789  
8779  
8872  
8973  
8979  
9085  
Russian  
Quechua  
Raeto-Romance  
Romanian  
Rundi  
Samoan  
Sango  
Sanskrit  
Sardinian  
Serbian  
Shona  
Arabic  
Armenian  
Assamese  
Avestan  
Aymara  
Azerhaijani  
Bahasa Melayu  
Bashkir  
Belarusian  
Bengali  
Bihari  
Bislama  
Bokmål, Norwegian  
Bosanski  
Brezhoneg  
Bulgarian  
Burmese  
Castellano, Español  
Catalán  
Chamorro  
Chechen  
Chewa; Chichewa; Nyanja7889  
Shqip  
Sindhi  
Kinyarwanda  
Kirghiz  
Komi  
Sinhalese  
Slovensky  
Slovenian  
Somali  
Sotho; Southern  
South Ndebele  
Sundanese  
Suomi  
Swahili  
Swati  
Svenska  
Tagalog  
Tahitian  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga (Tonga Islands)  
Tsonga  
Tswana  
Türkçe  
Turkmen  
Twi  
Uighur  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapuk  
Walloon  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Korean  
Kuanyama; Kwanyama 7574  
Kurdish  
Lao  
Latina  
Latvian  
Letzeburgesch;  
Limburgan; Limburger 7673  
Lingala  
Lithuanian  
Luxembourgish;  
Macedonian  
Malagasy  
Magyar  
Malayalam  
Maltese  
Manx  
Maori  
Marathi  
Marshallese  
Moldavian  
Mongolian  
Nauru  
Navaho; Navajo  
Ndebele, North  
Ndebele, South  
Ndonga  
Nederlands  
Nepali  
Norsk  
Northern Sami  
North Ndebele  
Norwegian Nynorsk;  
Occitan; Provencal  
Old Bulgarian;Old Slavonic 6785  
Oriya  
Oromo  
Ossetian; Ossetic  
Pali  
Panjabi  
Persian  
Polski  
Português  
7585  
7679  
7665  
7686  
7666  
7678  
7684  
7666  
7775  
7771  
7285  
7776  
7784  
7186  
7773  
7782  
7772  
7779  
7778  
7865  
7886  
7868  
7882  
7871  
7876  
7869  
7879  
8369  
7868  
7878  
7967  
9072  
9065  
中文  
Chuang; Zhuang  
Church Slavic; Slavonic 6785  
Chuvash  
Corsican  
Česky  
6786  
6779  
6783  
6865  
6869  
6890  
6978  
6979  
6984  
6985  
6976  
7079  
7082  
7089  
7074  
Dansk  
Deutsch  
Dzongkha  
English  
Esperanto  
Estonian  
Euskara  
ꢀꢁꢁꢂꢃꢄꢅꢆ  
Faroese  
Français  
Frysk  
Fijian  
Gaelic; Scottish Gaelic 7168  
Gallegan  
Georgian  
Gikuyu; Kikuyu  
Guarani  
Gujarati  
Hausa  
Herero  
Hindi  
Hiri Motu  
Hrwatski  
Ido  
7176  
7565  
7573  
7178  
7185  
7265  
7290  
7273  
7279  
6779  
7379  
7982  
7977  
7983  
8073  
8065  
7065  
8076  
8084  
Interlingua (International)7365  
Interlingue  
Inuktitut  
7365  
7385  
36  
O
X
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
X
O
O
O
O
O
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous  
materials for this part is below the limit requirement in SJ/T11363 – 2006.  
X: Indicates that this toxic or hazardous substance contained in at least one of the  
homogeneous materials used for this part is above the limit requirement in SJ/T11363 - 2006.  
Environmental Protection Use Period  
This logo refers to the period ( 10 years ) during which the toxic or hazardous substances or elements  
contained in electronic information products will not leak or mutate so that the use of these [substances or  
elements] will not result in any severe environmental pollution, any bodily injury or damage to any assets.  
Battery labeling logo  
Environmental Protection Use Period  
This logo refers to the period ( 5 years ) during which the toxic or hazardous substances or elements  
contained in the battery will not leak or mutate so that the use of these [substances or elements] will not  
result in any severe environmental pollution, any bodily injury or damage to any assets.  
37  
© 2009 Koninklijke Philips Electronics N.V.  
All right reserved  
sgptt_0916/93-2_1  

Intel Computer Hardware HS 2601A User Manual
Intel MB898F User Manual
KitchenAid KEDT105V User Manual
LG Electronics LG Life Good Computer Monitor L1954TQ User Manual
Miele KM88 2 User Manual
NEC AccuSync 50 User Manual
Philips 15PT2967 User Manual
Philips 107E66 User Manual
Philips HTS3155 User Manual
Philips KX TG2237 User Manual