Philips Computer Monitor 40PFL1708 User Manual

Rwegwistewr yo.upr hproildiupctsan.dcgoetmsup/psorut apt port  
50PFL3708  
46PFL3708  
40PFL4708  
40PFL1708  
39PFL2708  
32PFL3508  
32PFL4508  
29PFL4508  
24PFL4508  
EN For further assistance, call the customer support service in your country.  
To obtain assistance, contact Philips Customer Care Center;  
In the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands 1 866 309 5962  
México D.F. and Área Metropolitana; 58 87 97 36  
EN User Manual  
Interior de la Republica; 01 800 839 19 89  
ES Manual del Usuario  
FR Manuel d’Utilisation  
ES Para obtener más información, llame al servicio de soporte al cliente de su país.  
Para obtener asistencia, comuníquese con Centro de atención al cliente de Philips;  
En los Estados Unidos, en Canadá, Puerto Rico o en las Islas Vírgenes de los  
Estados Unidos; 1 866 309 5962  
México D.F. y Área Metropolitana; 58 87 97 36  
Interior de la Republica; 01 800 839 19 89  
FR Pour obtenir de l’aide supplémentaire, communiquez avec le centre de service  
à la clientèle de votre pays.  
Pour obtenir de l’aide, communiquez avec le centre de service à la clientèle Philips au;  
Dans le États-Unis, au Canada, à Puerto Rico ou aux Îles Vierges américaines; 1 866 309 5962  
México D.F. et Área Metropolitana; 58 87 97 36  
Interior de la Republica; 01 800 839 19 89  
English  
3
to get the very most from your purchase.  
Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don't miss out.  
CHILD SAFETY:  
PROPER TELEVISION PLACEMENT MATTERS  
THE CONSUMER ELECTRONICS INDUSTRY  
WALL OR CEILING MOUNT YOUR TELEVISION  
ALWAYS contact your retailer about professional installation if  
you have any doubts about your ability to safely mount your  
television.  
ALWAYS use a mount that has been recommended by the  
television manufacturer and has a safety certification by an  
independent laboratory (such as UL, CSA, ETL).  
ALWAYS follow all instructions supplied by the television and  
mount manufacturers.  
ALWAYS make sure that the wall or ceiling where you are  
mounting the television is appropriate. Some mounts are not  
designed to be mounted to walls and ceilings with steel studs  
or cinder block construction. If you are unsure, contact a  
professional installer.  
• Televisions can be heavy. A minimum of two people is  
required for a wall or ceiling mount installation.  
CARES  
• Manufacturers, retailers and the rest of the consumer  
electronics industry are committed to making home  
entertainment safe and enjoyable.  
• As you enjoy your television, please note that all televisions –  
new and old- must be supported on proper stands or installed  
according to the manufacturer’s recommendations. Televisions  
that are inappropriately situated on dressers, bookcases,  
shelves, desks, speakers, chests, carts, etc., may fall over,  
resulting in injury.  
TUNE IN TO SAFETY  
ALWAYS follow the manufacturer’s recommendations for the  
safe installation of your television.  
ALWAYS read and follow all instructions for proper use of  
your television.  
MOVING AN OLDER TELEVISION TO A NEW  
NEVER allow children to climb on or play on the television or  
the furniture on which the television is placed.  
NEVER place the television on furniture that can easily be used  
as steps, such as a chest of drawers.  
PLACE IN YOUR HOME  
• Many new television buyers move their older CRT televisions  
into a secondary room after the purchase of a flat-panel  
television. Special care should be made in the placement of  
older CRT televisions.  
ALWAYS install the television where it cannot be pushed,  
pulled over or knocked down.  
ALWAYS route cords and cables connected to the television  
so that they cannot be tripped over, pulled or grabbed.  
ALWAYS place your older CRT television on furniture that is  
sturdy and appropriate for its size and weight.  
NEVER place your older CRT television on a dresser where  
children may be tempted to use the drawers to climb.  
ALWAYS make sure your older CRT television does not hang  
over the edge of your furniture.  
CE.org/safety  
English  
4
Important Safety Instructions  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
13. Unplug this apparatus during lightning storms or when unused for  
long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is  
required when the apparatus has been damaged in any way, such  
as power-supply cord or plug is damaged, liquid has been spilled  
or objects have fallen into the apparatus, the apparatus has been  
exposed to rain or moisture, does not operate normally, or has  
been dropped.  
7. Do not block any ventilation openings. Install in accordance with the  
manufacturer’s instructions.  
Note to the CATV system installer:  
8. Do not install near any heat sources such as radiators, heat registers,  
This reminder is provided to call the CATV system installer’s  
attention to Article 820-40 of the NEC that provides guidelines for  
proper grounding and, in particular, specifies that the cable ground  
shall be connected to the grounding system of the building, as close  
to the point of cable entry as practical.  
stoves, or other apparatus (including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-  
type plug.A polarized plug has two blades with one wider than the  
other.A grounding type plug has two blades and a third grounding  
prong.The wide blade or the third prong are provided for your  
safety. If the provided plug does not fit into your outlet, consult an  
electrician for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the point where  
they exit from the apparatus.  
Example of Antenna Grounding as per NEC − National  
Electric Code  
GROUND CLAMP  
ANTENNA LEAD INWIRE  
11. Only use attachments / accessories specified by the manufacturer.  
12. Use only with the cart, stand, tripod, bracket, or table  
specified by the manufacturer, or sold with the  
apparatus.When a cart is used, use caution when  
moving the cart / apparatus combination to avoid injury  
from tip-over.  
ANTENNA DISCHARGE  
UNIT (NEC SECTION 810-20)  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRIC SERVICE  
ELECTRODE SYSTEM  
EQUIPMENT  
(NEC ART 250, PART H)  
P&F USA is not liable for these types of accidents or injury noted  
below.  
Wall Mount Bracket Kit  
Brand  
Model #  
Screw dimension  
Install the Wall Mount Bracket on a sturdy vertical wall.  
If installed onto a ceiling or slanted wall, theTV and Wall Mount  
Bracket may fall which could result in a severe injury.  
50PFL3708 /  
46PFL3708  
M6 x 1.614” (41mm)  
with spacer  
PHILIPS  
SQM6485  
40PFL4708 /  
39PFL2708  
M6 x 1.614” (41mm)  
with spacer  
Do not use screws that are longer or shorter than their specified  
length. If screws too long are used this may cause mechanical or  
electrical damage inside theTV set. If screws too short are used  
this may cause theTV set to fall.  
PHILIPS  
SANUS  
SQM6435/17  
SAN25BB  
40PFL1708  
M4 x 0.472” (12mm)  
M4 x 0.472” (12mm)  
M4 x 0.472” (12mm)  
32PFL3508 /  
32PFL4508 /  
29PFL4508  
Do not fasten the screws by excessive force.This may damage  
SANUS  
SANUS  
SAN18B  
MST15  
the product or cause the product to fall, leading to an injury.  
For safety reasons use 2 people to mount theTV onto a Wall  
Mounting Bracket.  
Do not mount theTV onto the Wall Mounting Bracket while  
yourTV is plugged in orTurned On. It may result in an electrical  
shock injury.  
24PFL4508  
The recommended Wall Mount Bracket Kit (sold separately)  
allows the mounting of theTV on the wall.  
For detailed information on installing the wall mount, refer to the  
Wall Mount Instruction Book.  
P&F USA is not responsible for any damage to the product or  
injury to yourself or others if you elect to install theTV Wall  
Mount Bracket or mount theTV onto the Bracket on your own.  
When installing the unit on the wall, allow this much space.  
Top:  
11.8 inches (30cm)  
5.9 inches (15cm)  
3.9 inches (10cm)  
Left and right side:  
Bottom:  
The Wall Mount Bracket must be installed by experts.  
English  
5
Modifications  
1 Notice  
This apparatus may generate or use radio frequency energy. Changes  
or modifications to this apparatus may cause harmful interference  
unless the modifications are expressly approved in the User Manual.  
The user could lose the authority to operate this apparatus if an  
unauthorized change or modification is made.  
Trademarks are the property of Koninklijke Philips N.V. or their  
respective owners.  
P&F USA reserves the right to change products at any time without  
being obliged to adjust earlier supplies accordingly.  
The material in this manual is believed adequate for the intended use of  
the system. If the product or its individual modules or procedures are  
used for purposes other than those specified herein, confirmation of  
their validity and suitability must be obtained. P&F USA warrants that  
the material itself does not infringe any United States patents. No  
further warranty is expressed or implied.  
P&F USA cannot be held responsible neither for any errors in the  
content of this document nor for any problems as a result of the  
content in this document. Errors reported to P&F USA will be adapted  
and published on the P&F USA support website as soon as possible.  
Cables  
Connections to this device must be made with shielded cables with  
metallic RFI / EMI connector hoods to maintain compliance with FCC  
Rules and Regulations.  
Canadian notice  
CAN ICES-3 (B)/NMB-3 (B)  
StandardTelevision Receiving Apparatus, Canada BETS-7 / NTMR-7.  
Copyright  
All other registered and unregistered trademarks are the property of  
their respective owners.  
The terms HDMI and HDMI High-Definition  
Multimedia Interface, and the HDMI Logo are  
trademarks or registered trademarks of HDMI  
Licensing LLC in the United States and other  
countries.  
Pixel characteristics  
This LCD product has a high number of color pixels.Although it has  
effective pixels of 99.999% or more, black dots or bright points of light  
(red, green or blue) may appear constantly on the screen.This is a  
structural property of the display (within common industry standards)  
and is not a malfunction.  
Manufactured under license from Dolby  
Laboratories. Dolby and the double-D symbol  
are trademarks of Dolby Laboratories.  
Warranty  
No components are user serviceable. Do not open or remove covers  
to the inside of the product. Repairs may only be done by Service  
Centers and official repair shops. Failure to do so shall void any  
warranty, stated or implied.  
is a trademark of SRS Labs, Inc.  
TruSurround XT technology is incorporated  
under license from SRS Labs, Inc.  
Any operation expressly prohibited in this manual, any adjustments or  
assembly procedures not recommended or authorized in this manual  
shall void the warranty.  
SRSTruSurround XT® creates a truly immersive  
surround sound experience with rich bass and  
clear dialog from only two speakers.  
Federal Communications Commission Notice  
* SRSTruSurround XT technology is supported in 40PFL4708,  
39PFL2708, 32PFL3508, 32PFL4508, 29PFL4508, 24PFL4508 only.  
This equipment has been tested and found to comply with the limits  
for a Class B Digital device, pursuant to part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against  
harmful interference in a residential installation.This equipment  
generates, uses and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one  
or more of the following measures:  
ENERGY STAR® is a joint program of the U.S.  
Environmental Protection Agency and the U.S.  
Department of Energy helping us all save  
money and protect the environment through  
energy efficient products and practices.  
Consumer Notice:  
ThisTV has been set to maximize energy efficiency while delivering the  
best possible picture using the factory installed home mode settings.  
Changing or enabling other features in thisTV (e.g. brightened  
backlighting) will possibly increase energy consumption beyond the  
original ENERGY STAR® qualified limits.  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and the receiver.  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
LED backlighting technology uses less energy  
when compared with a standard CCFL  
backlighting LCD television of the same  
screen size.Actual energy savings will vary  
depending on the screen size.  
Consult the dealer or an experienced radio or television technician  
for help.  
Declaration of Conformity  
Trade Name :  
PHILIPS  
Portions of this software are copyright ©The FreeType Project  
(www.freetype.org).  
Responsible Party : P&F USA, Inc.  
Model :  
50PFL3708, 46PFL3708, 40PFL4708,  
The American Academy of Pediatrics discourages television viewing  
for children younger than two years of age.  
40PFL1708, 39PFL2708, 32PFL3508,  
32PFL4508, 29PFL4508, 24PFL4508  
PO Box 2248,Alpharetta, GA 30023-2248  
U.S.A.  
Address :  
Telephone Number : 1 866 309 5962  
English  
6
CAUTION: Danger of explosion if battery is incorrectly replaced.  
2 Important  
Replace only with the same or equivalent type.  
WARNING: Batteries (battery pack or battery installed) shall not be  
exposed to excessive heat such as sunshine, fire or the  
like.  
Positioning the TV  
WARNING: To prevent injury, this apparatus must be securely  
attached to the furniture / wall in accordance with the  
instructions.Tipping, shaking, or rocking the unit may  
cause injury / death.  
Large screenTVs are heavy. 2 people are required to carry and  
handle a large screenTV.  
Make sure to hold the upper and bottom  
frames of the unit firmly as illustrated.  
Install the unit in a horizontal and stable  
position.  
Do not install the unit in direct sunlight  
or in a place subject to dust or strong  
vibration.  
Environmental care  
Depending on the environment, the temperature of this unit may  
increase slightly.This is not a malfunction.  
Avoid a place with drastic temperature changes.  
Do not place anything directly on top or bottom of the unit.  
Depending on your external devices, noise or disturbance of the  
picture and / or sound may be generated if the unit is placed too  
close to them. In this case, please ensure enough space between  
the external devices and the unit.  
The packaging of this product is intended to be recycled.  
Contact your local authorities for information about how to recycle the  
packaging.  
Do not insert the AC power cord into the power socket outlet  
For product recycling information, please visit -  
before all the connections are made.  
Ensure that you always have easy access to the AC power cord or  
plug to disconnect theTV from the power.  
Before you move theTV, disconnect attached cables to prevent  
damage to connectors.  
Be sure to unplug the AC power cord from the AC outlet before  
moving or carrying the unit.  
End of life directives  
Philips pays a lot of attention to produce environment-friendly products  
in green focal areas.Your newTV contains materials which can be  
recycled and reused.At the end of its life, specialized companies can  
dismantle the discardedTV to concentrate the reusable materials and to  
minimize the amount of materials to be disposed of. Please ensure you  
dispose of your oldTV according to local regulations.  
Regulatory notices  
Do not place the unit on the furniture that is capable of being tilted  
by a child and an adult leaning, pulling, standing or climbing on it.  
A falling unit can cause serious injury or even death.  
This apparatus should not be placed in a built-in installation such as a  
bookcase or rack unless proper ventilation is provided.  
Make sure to leave a space of 4 inches (10cm) or more around this  
apparatus.  
Disposal of used batteries  
The batteries supplied do not contain the heavy metals mercury and  
cadmium. Nevertheless, in many areas batteries may not be disposed  
of with your household waste. Please ensure you dispose of batteries  
according to local regulations.  
Press to turn the unit on and go into standby mode.  
To completely turn Off the unit, you must unplug the AC power cord.  
Disconnect the AC plug to shut the unit off when trouble is found or  
not in use.The AC plug shall remain readily available.  
AC plug  
Never use a gas duster on thisTV.  
The gas trapped inside of this unit may cause ignition and explosion.  
   
English  
7
3 Get started  
Supplied accessories  
User Manual  
Quick Start guide  
Features  
DTV / Analog TV / CATV  
You can use your remote control to select channels which are broadcast in Digital  
format and conventional Analog format. Also, cable subscribers can access their cable  
TV channels.  
Information display  
You can display the title, contents (DTV only) and other information of the current  
program on the TV screen.  
Remote Control and  
TV base and screws  
50PFL3708 / 46PFL3708 / 40PFL4708 / 39PFL2708  
batteries  
(AAA, 1.5V x 2)  
Autoprogram  
This unit automatically scans and memorizes channels available in your area, eliminating  
difficult setup procedures.  
Child lock  
This feature allows you to block children’s access to inappropriate programs.  
Closed Caption decoder  
Built-in Closed Caption decoder displays text for Closed Caption supported programs.  
40PFL1708 / 32PFL3508  
MTS / SAP tuner  
Audio can be selected from the remote control.  
Auto Standby  
If there is no Input signal and no operation for 15 minutes, the unit will go into Standby  
mode automatically.  
32PFL4508 / 29PFL4508 / 24PFL4508  
Sleep timer  
You can set the unit to go into Standby mode after a specific amount of time.  
Choices for on-screen language  
Select your on-screen language: English, Spanish or French.  
Screws packed with this unit.  
Stereo sound function  
PLL frequency synthesized tuning  
Provides free and easy channel selection and lets you tune directly to any channel using  
the number and decimal point “•” buttons on the remote control.  
Model  
Quantity  
Size  
50PFL3708 /  
46PFL3708  
8
M4 x 0.472”(12mm)  
Various adjustment for picture and sound  
Customizes image quality suitable for your room and sets your sound preference.  
3
4
3
M4 x 0.393”(10mm)  
M4 x 0.787”(20mm)  
M4 x 0.787”(20mm)  
40PFL4708 /  
39PFL2708  
EasyLink via HDMI link  
EasyLink allows your other HDMI link devices to be controlled by the HDMI cable  
connected to your TV.  
40PFL1708  
32PFL3508 /  
32PFL4508 /  
29PFL4508 /  
24PFL4508  
HDMI Input  
3
M4 x 0.984”(25mm)  
HDMI-DVI Input  
If your video device has DVI Output jack, use an HDMI-DVI conversion cable to  
connect the unit.  
Component Video Input  
PC Input  
Note  
If you lose the screws, please purchase the above-mentioned Phillips head screws at  
your local store.  
If you need to replace these accessories, please refer to the part name or No. with the  
illustrations and call our toll free customer support line found on the cover of this User  
Manual.  
AV Input  
USB terminal  
The picture (JPEG) and video (Motion JPEG) files stored on a USB Memory Stick can  
be played back on this unit.  
When using a universal remote control to operate this unit.  
Digital Audio Output  
Make sure the component code on your universal remote control is set to our brand.  
Refer to the instruction book accompanying your remote control for more details.  
We do not guarantee 100% interoperability with all universal remote controls.  
Headphone Audio Output  
Symbols used in this User Manual  
The following is the description for the symbols used in this User  
Manual. Description refers to:  
Digital TV operation  
Analog/Cable TV operation  
If neither symbol appears, the operation is applicable to both.  
English  
8
32PFL4508 / 29PFL4508 / 24PFL4508  
Stand assembly  
1
2
50PFL3708 / 46PFL3708 / 40PFL4708 / 39PFL2708  
2
1
×
×
4
3
[50PFL3708 / 46PFL3708]  
[40PFL4708 / 39PFL2708: M4 x 0.393”(10mm)]  
×
1
32PFL4508 / 29PFL4508 / 24PFL4508  
3
×
2
40PFL1708 / 32PFL3508  
Attaching the base  
You must attach the base to the unit to have it as a table top unit.  
Be sure the front and rear of the base match the proper direction.  
For large screen TVs, at least 2 people are required for these steps.  
1
2
2
1
50PFL3708 / 46PFL3708 / 40PFL4708 / 39PFL2708  
1
×
3
2
Note  
Make sure to use a table which can support the weight of this unit and is larger than  
this unit.  
Make sure the table is in a stable location.  
When attaching the base, ensure that “FRONT” with “arrow” written on the bottom  
of the base is downward. If it’s not downward, the 2 hooks don’t fit into the base.  
When attaching the base, ensure that all screws are tightly fastened. If the base is not  
properly attached, it could cause the unit to fall, resulting in injuries as well as damage  
to the unit.  
×
×
4
4
[50PFL3708 / 46PFL3708]  
To remove the base from this unit, unscrew the Phillips head screws in step 2.  
Be careful not to drop the base when you remove it.  
[40PFL4708 / 39PFL2708: M4 x 0.787”(20mm)]  
English  
9
Managing cables  
Route your antenna cable and all other cables through the cable  
management tie* at the back of the TV.  
The holder helps keep your cables tidy and easily manageable.  
1 Attach the cable management tie as illustrated below.  
2 Pass cables through the cable management tie to avoid tangles.  
* The cable management tie is not supplied with your TV. If you would  
like this part, please call our toll free customer support line found on  
the cover of this User Manual, and it will be sent to you for free of  
charge.  
Installing the remote control batteries  
1 Slide the battery cover off the back of the remote control.  
2 Insert the 2 supplied batteries (AAA, 1.5V). Be sure the + and  
ends of the batteries line up with the markings inside the case.  
3 Slide the cover back into position.  
Note  
Remove the batteries if not using the remote control for an extended period of time.  
English  
10  
a
b
(POWER)  
Remote control  
Turns the TV On from Standby or Off to Standby.  
EasyLink(HDMI CEC) buttons  
Æ
Begins or Restarts the Disc playback.  
a
b
Δ
Pauses the Disc playback.  
Stops the Disc playback.  
C
E / D Searches Backward or Forward through the disc.  
Note  
q
p
c
d
You must set On in the Master EasyLink (p.30) to operate the above  
functions.  
c
d
SAP  
Selects Audio mode (MONO/STEREO/SAP) / Audio language.  
o
n
e
(MENU)  
Displays the main menu.  
f
g
e
f
INFO  
Displays Information about the current program.  
h
i
▲▼◄► (NAVIGATION buttons) / OK  
Moves the cursor, Selects the On-screen Menu items.  
m
l
g
OPTIONS  
Opens EasyLink options menu.  
Note  
j
k
You must set On in the Master EasyLink (p.30) to operate the above  
functions.  
h
i
j
k
SOURCE  
Selects Connected devices.  
CH + / −  
Selects a Channel.  
COLOR buttons  
Use these Buttons according to the directions On-screen.  
0 9 (NUMBER buttons)  
Used to enter a Channel / Program number.  
(DOT) Use with 0-9 to select digital channels. For example, to  
enter 2.1, press  
PREV.CH Returns to the previously viewed Channel.  
l
m
n
o
p
q
(MUTE)  
Turns the Sound On and Off.  
VOL + / −  
Adjusts the Volume.  
BACK  
Returns to the previous Menu operation.  
FORMAT  
Adjusts the Picture size on the TV screen.  
SLEEP  
Sets Sleep Timer.  
CC  
Displays the audio portion of programming as text superimposed  
over the video.  
English  
11  
Control panel  
Terminals  
50PFL3708 / 46PFL3708  
*
Keys on Rear.  
Control Keys are located  
on the Rear side of the TV  
m
a
b
c
d
e
h g f  
n
* When seen from the front.  
40PFL4708 / 32PFL4508 / 29PFL4508 / 24PFL4508  
a
c
d
b
e
i
j
o
p
*
f h  
g
*
40PFL4708 only  
k
l
40PFL1708 / 39PFL2708 / 32PFL3508  
i
j
Digital Audio Output jack  
Digital Audio (S/PDIF) Output to home theaters and other Digital  
Audio systems.  
*
h
g
f
Component (Y/Pb/Pr) / Composite Video (VIDEO) Input jacks  
for VIDEO  
a
b
c
d
e
Composite Video Input (VIDEO) jack is a shared jack with  
Component Video Input (Y) jack.  
40PFL1708, 39PFL2708 only  
*
k
l
Analog Audio (L/R) Input jacks  
Connect Analog Audio signals from;  
– HDMI-DVI / Analog Audio (L/R) jacks signal  
– Component Video / Analog Audio (L/R) jacks signal  
– Composite Video / Analog Audio (L/R) jacks signal  
– PC Connection / Analog Audio (L/R) jacks signal with Stereo  
mini 3.5mm plug Audio cable on PC  
a
b
VOL /►  
Adjusts the Volume. In the Menu screen, moves the Cursor Left  
() / Right ().  
VOL : Volume Down  
VOL : Volume Up  
CH /▼  
HDMI Input jack(s)  
Selects a Channel. In the Menu screen, moves the Cursor Up ()  
Digital audio and video Input from high definition Digital devices  
such as DVD / Blu-ray disc players, cable / satellite set-top boxes  
PC’s.  
/Down ().  
c
d
MENU  
Opens the Main On-screen Menu.  
m
n
PC Input jack  
VGA cable connection for PC.  
SOURCE  
Selects Connected devices.  
USB terminal  
e
f
g
h
(POWER)  
Turns the TV On and Off.  
Data Input from USB Memory Stick only.  
Do not connect any device to this terminal such as; Digital  
camera, keyboard, mouse, etc.  
Remote Control Sensor  
Receives IR signal from Remote control.  
o
p
75 ohm Cable / Antenna connection  
Signal Input from an antenna or cable / satellite set-top boxes.  
Power On / Standby Indicator  
(On : lights in white, Standby : no light)  
Headphone Audio Output jack  
Headphone 3.5mm stereo jack for personal listening.  
Ambient Light Sensor  
Alters the brightness of the TV screen automatically by detecting  
your room lighting level. Do not block this Light Sensor window  
to allow proper operation.  
English  
12  
Connecting a set-top box, Blu-ray disc / DVD recorder  
via composite connectors and Analog Audio  
Connecting the antenna or the cable  
Be sure your antenna or other device is connected properly before  
plugging in the AC power cord.  
Do not place your recorder too close to the screen because some  
recorders can be susceptible to signals.  
If you connect to an antenna through RF cable  
Any DTV programs that are broadcasted in your area can be received  
for free through an antenna connection.  
cable  
OUT  
set-top box  
RF cable  
cable  
IN  
RF cable  
OUT  
OUT  
IN  
Audio (L/R) +  
Video cables  
antenna  
OUT  
IN  
IN  
OUT  
RF cable  
Audio (L/R) + Video cables  
IN  
If you connect a set-top box through RF cable  
If the TV is connected to a cable / satellite set-top box via a coaxial  
connection, set the TV to channel 3, 4 or the channel specified by the  
service provider.  
Blu-ray disc/DVD recorder  
Note  
If you have any question about the DTV’s antenna, visit www.antennaweb.org for  
further information.  
Depending on your antenna system, you may need different types of combiners  
(mixers) or separators (splitters) for HDTV signal. The minimum RF bandpass on  
these devices is 2,000MHz or 2GHz.  
For your safety and to avoid damage to this unit, please unplug the RF coaxial cable  
from the antenna Input jack before moving the unit.  
If you did use an antenna to receive Analog TV, it should also work for DTV reception.  
Outdoor or attic antennas will be more effective than a set-top box or inside antenna.  
To Turn On your reception source easily between antenna and cable, install an  
antenna selector.  
If you are not receiving a signal from your cable service, contact the Cable provider.  
Only the left loudspeaker reproduces sound for mono equipment. Use a mono to  
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.  
RF cable  
IN  
antenna  
OUT  
set-top box  
RF cable  
IN  
If you connect a set-top box through HDMI  
If the TV is connected to a cable / satellite set-top box via HDMI, make  
Plugging in the AC power cord  
sure you select the correct Source by using  
SOURCE.  
Make sure that the AC power cord must be plugged to an AC outlet  
after all the necessary connections are made.  
Caution  
Do not connect the AC power cord to a power supply outside the indicated voltage  
of this unit (AC 120V).  
Connecting the AC power cord to a power supply outside of this range may result in  
fire, smoke, unit failure or electrical shock.  
RF cable  
Note  
IN  
IN  
OUT  
Each time you plug in the AC power cord, no operations will be performed for a few  
seconds. This is not a malfunction.  
HDMI cable  
set-top box  
If you connect a set-top box through Component Video Input  
If the TV is connected to a cable / satellite set-top box via Component  
Video Input, make sure you select the correct Component Video Source  
by using  
SOURCE.  
RF cable  
OUT  
OUT  
Audio (L/R) cables  
IN  
IN  
IN  
set-top box  
Component (Y/Pb/Pr) video cables  
English  
13  
No supplied cables are used with these connections:  
Connecting your devices  
• Please purchase the necessary cables at your local store.  
Before you connect AC power cord:  
Be sure other devices are connected properly before plugging in the AC  
power cord.  
HDMI Digital connection  
HDMI connection offers the highest picture quality.  
HDMI (High-Definition Multimedia Interface) transports high definition  
Digital video and multi-channel Digital Audio through a single cable.  
Selecting your connection quality  
set-top box  
or  
HDMI - Highest quality  
Blu-ray disc player  
or  
IN  
OUT  
HDMI cable  
HD game console  
Supports high-definition Digital signals and gives highest picture and  
sound quality. Video and audio signals are combined in one cable.  
You must use HDMI for full high-definition video and to enable EasyLink  
(HDMI CEC).  
HDMI-DVI connection  
This unit can be connected to your device that has a DVI terminal.  
Use an HDMI-DVI conversion cable for this connection and it requires  
audio cable for Analog Audio signal as well.  
Note  
Philips HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP is  
a form of Digital Rights Management that protects high definition content in Blu-ray  
discs or DVDs.  
Component (Y Pb Pr) - High quality  
cable receiver or  
satellite box with the  
DVI Output jack  
IN  
OUT  
HDMI-DVI  
conversion cable  
OUT  
IN  
Audio (L/R) cables  
Supports high-definition Analog signals but gives lower picture quality  
than HDMI. Component (Y/Pb/Pr) Video cables combine red / green /  
blue video cables with red / white audio (L/R) cables. Match the cable  
colors when you connect to the TV.  
Note  
Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI  
cable is recommended for the better compatibility.  
For HDMI connection  
The unit accepts 480i / 480p / 720p / 1080i, 1080p 24/30/60Hz of video signals,  
32kHz / 44.1kHz and 48kHz of audio signals.  
This unit accepts 5.1 channel audio signal (Dolby Digital) and 2 channel audio signal  
(LPCM).  
This unit accepts only signals in compliance with EIA861.  
Composite - Basic quality  
For HDMI-DVI connection  
The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.  
HDMI-DVI connection requires separate audio connections as well and the audio  
signals are output as Analog (L/R) Audio.  
DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.  
For analog connections. Composite Video / Audio Analog cable usually  
combine a yellow video cable with red / white audio (L/R) cables. With  
this unit, yellow cable must be connected to Y (green) jack of  
Component Video Input jacks.  
English  
14  
Component Analog Video Connection  
Digital Audio Output Connection  
Component Analog Video connection offers better picture quality for  
video devices connected to the unit.  
If you connect this unit to an external Digital Audio device, you can  
enjoy multi-channel audio like 5.1ch Digital broadcasting sound.  
If you connect to the unit’s Component Video (Y/Pb/Pr) Input jacks,  
connect Analog Audio cables to the Analog Audio (L/R) Input jacks.  
Use a Digital Audio coaxial cable to connect the unit to external Digital  
Audio devices.  
OUT  
IN  
set-top box  
Audio (L/R) cables  
Digital Audio coaxial cable  
or  
OUT  
Digital home theater  
IN  
amplifier  
OUT  
IN  
Component (Y/Pb/Pr) Video cables  
Blu-ray disc/DVD  
recorder  
Note  
The unit accepts 480i / 480p / 720p and 1080i of video signals for this connection.  
Composite Analog Video Connection  
Composite Analog Video connection offers standard picture quality for  
video devices connected to the unit.  
If you connect to the unit’s Composite Video (Y/VIDEO) Input jack,  
connect audio cables to the Audio (L/R) Input jacks. When the Audio is  
monaural, then only connect to the Audio L Input jack.  
OUT  
DVD player  
Audio (L/R) + Video cable  
IN  
Note  
With this unit, yellow cable must be connected to Y (green) jack of Component Video  
Input jacks.  
Whenever you connect to the Composite Video Input jack (Y/VIDEO), you must  
disconnect the Component Video Input jacks (Pb and Pr). If you leave those jacks  
connected, it may cause of an unstable picture.  
Only the left loudspeaker reproduces sound for mono equipment. Use a mono to  
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.  
English  
15  
The following video signals can be displayed:  
PC connection  
Format  
VGA  
Resolution  
640 x 480  
Refresh rate  
HDMI connection  
This unit can be connected to your PC that has a HDMI terminal. Use an  
HDMI cable for this Digital connection.  
SVGA  
XGA  
800 x 600  
1,024 x 768  
1,280 x 768  
1,360 x 768  
1,920 x 1,080  
60Hz  
WXGA  
FHD*  
Other formats or non-standard signals will not be displayed correctly.  
* 50PFL3708 / 46PFL3708 / 40PFL4708 / 40PFL1708 / 39PFL2708  
only.  
IN  
OUT  
HDMI cable  
PC  
Note  
Please purchase the VGA cable or HDMI-DVI conversion cable that has a ferrite core.  
The following operations may reduce noise.  
Attach a ferrite core to the AC power cord of your PC.  
Unplug the AC power cord and use the built-in battery of your PC.  
Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI  
cable is recommended for the better compatibility.  
The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.  
HDMI-DVI connection requires separate audio connections as well and the audio  
signals are output as Analog (L/R) Audio.  
HDMI-DVI connection  
DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.  
This unit can be connected to your PC that has a DVI terminal. Use an  
HDMI-DVI conversion cable for this Video Digital connection and it  
requires Stereo mini 3.5mm plug Audio cable for Analog Audio signal as  
well.  
USB Memory Stick  
This unit offers easy playback of picture (JPEG) and video (Motion JPEG)  
files.  
Insert the USB Memory Stick into the USB terminal shown below.  
IN  
OUT  
HDMI-DVI  
conversion cable  
PC  
OUT  
IN  
Stereo mini 3.5 mm plug Audio cable  
VGA connection  
This unit is equipped with a PC Input jack. If you connect this unit to  
your PC, you can use this unit as a PC monitor.  
Use a VGA cable for this Video connection and it requires a Stereo mini  
3.5mm plug Audio cable for Analog Audio signal as well.  
Note  
The unit recognizes only a USB Memory Stick.  
Do not use a USB hub or an extension cable to connect an external hard disk drive to  
the unit. (Not supported.)  
A USB Memory Stick is always inserted to this unit directly.  
A USB Memory Stick is not supplied with this unit.  
We do not guarantee that all USB Memory Sticks can be supported by this unit.  
Be sure to keep a backup copy of the original files on your device before you play  
them back on this unit. We have no responsibilities for damage or loss of your stored  
data.  
VGA cable  
IN  
OUT  
To protect your USB Memory Stick files from being erased place the write protect  
sliding tab in the protect position.  
When you are ready to remove a USB Memory Stick, set the unit to go into Standby  
mode to avoid any damage to your data and the unit.  
A USB Memory Stick that requires its own driver or the device with a special system  
such as fingerprint recognition are not supported.  
This unit is not allowed to use the USB Memory Stick which requires an external  
power supply (500mA or more).  
PC  
OUT  
IN  
Stereo mini 3.5 mm plug Audio cable  
English  
16  
4 Use ▲▼ to select the desired location setting, then press OK.  
These operations are accessible by remote control.  
Some may also be accessible by control panel on the main unit.  
®
Home is the ENERGY STAR qualified setting.  
Initial setup  
Retail  
Initial setup  
Location Home is recommended for normal home use  
Home  
and is ENERGY STAR qualified.  
This section will guide you through the unit’s initial setting which includes  
selecting a language for your on-screen menu and autoprogram, which  
automatically scans and memorizes viewable channels.  
In the Retail Store mode, all settings are fixed.  
Before you begin:  
Make sure the unit is connected to antenna or cable.  
1 After making all the necessary connections, press to Turn On the  
unit.  
Select  
OK  
• It may take a few moments to Turn On the unit for the first time.  
Initial setup menu appears automatically after the unit is Turned  
On.  
• Select Retail, the unit will be set up with predefined setting for  
retail displays. In this setting, the power consumption may  
possibly exceed the limited requirement limit of the ENERGY  
2 Use ▲▼ to select the on-screen language from the choices  
®
STAR qualification.  
(English / Español / Français) on the right side of the TV screen,  
• Select Home, the unit is set to maximize the energy efficiency for  
home setting and it can be adjusted through a choice of picture  
and sound quality according to your preference. Use this setting  
to remove the E-sticker if visible from the display. p.31  
• When the initial setup is completed, the lowest memorized  
channel with the confirmation message of the location setting will  
be displayed on the TV screen.  
then press OK.  
3 Use ▲▼ to select Antenna for TV channels or Cable for CATV  
channels, then press OK.  
Initial setup  
Make sure the antenna is connected to “ANTENNA IN’’ jack.  
Select your signal source.  
Antenna  
Cable  
5 When you select Home, press OK to begin Settings assistant.  
Settings assistant  
Skip  
Antenna  
Settings assistant helps you customize picture settings.  
You will see a series of test pictures where the right side and  
left side differ. Select the side that is most pleasing to you  
with the Left/ Right keys.  
Cable  
Or  
The energy consumption in the "Standard" setting is Energy Star  
qualified.  
ANTENNA IN  
Back  
Next  
Back  
Exit  
Select  
OK  
Skip  
6 Press or 3 times to select the side of the pictures that is the  
– When Antenna is selected, the TV detects antenna signals. It  
searches for DTV and Analog TV channels available in your area.  
– When Cable is selected, the TV detects signals supplied by cable.  
It searches for DTV, Analog TV and Cable channels available in  
your area.  
most pleasing to you, then press OK.  
Left side  
Right side  
Autoprogram will begin.  
Initial setup  
Please wait while the system is scanning for channels.  
Auto programming may take more than 20 minutes to  
complete.  
1/3 Select the picture setting that you prefer.  
Select  
Next  
Back  
Exit  
Digital channels  
Analog channels  
0 ch  
0 ch  
7 Press OK to finish Settings assistant.  
Settings assistant  
Skip  
You have set up your viewing preferences.  
Store Back Exit  
• When the initial setup is completed, the lowest memorized  
channel with the confirmation message of the location setting will  
be displayed on the TV screen.  
You must set Home in step 4. Otherwise, Picture and Sound  
settings you adjusted will not be memorized after the unit goes  
into Standby mode.  
Continued on next page.  
English  
17  
Note  
If you are not receiving a signal from your cable service, contact the Cable provider.  
If you press  
cancelled.  
or  
during autoprogram, this setup of TV channels will be  
The initial autoprogram function can be executed for either Antenna or Cable only  
once. When you change the connection (Antenna / Cable), select Autoprogram  
If there is no signal Input from the antenna terminal and no operation for several  
seconds after you Turn On the unit, helpful hints appears. Follow the instructions listed  
on the TV screen.  
Initial setup  
Retry  
No channel is registered.  
Try Autoprogram again?  
Verify that you have a cable connected to the “ANTENNA IN” jack Later  
on the back of the TV, the channel installation process  
searches this connection. If you are using a cable or satellite  
box, please confirm the input which you have connected to  
the box and press “SOURCE” key on the remote control to  
select the appropriate source input.  
Select  
OK  
Skip  
After an initial setup is completed...  
• If you want to scan the channels automatically again.  
Autoprogram p.24  
You can add the desired cable and Analog channels  
unmemorized by autoprogram.  
Add channels  
• If you want to change to another language.  
Language p.31  
• If you want to change the location setting.  
Location p.31  
• If you want to restore the picture setting.  
Settings assistant p.23  
English  
18  
4 Use your TV  
Switching channels  
40PFL4708 /  
32PFL4508 /  
29PFL4508 /  
24PFL4508  
40PFL1708 /  
39PFL2708 /  
32PFL3508  
50PFL3708 /  
46PFL3708  
Switching on your TV and putting it in  
Standby mode  
40PFL4708 /  
40PFL1708 /  
39PFL2708 /  
32PFL3508  
32PFL4508 /  
29PFL4508 /  
24PFL4508  
50PFL3708 /  
46PFL3708  
* Key on Rear  
* Key on Rear  
To Turn the TV On from Standby or Off to Standby  
Press (3 raised dots on the Rear panel or Front panel or the  
Remote control).  
Note  
Energy consumption contributes to air and water pollution. When the AC power cord  
is plugged in, your TV consumes energy. Your TV has very low standby power  
consumption.  
To select Channels by using CH /or CH + / −  
Press CH (Down) / (Up - 1 raised dot on the Rear panel or  
Front panel) or press CH + / on the Remote control.  
To select Channels by using the NUMBER buttons  
Adjusting volume  
Digital TV operation  
For Digital channels, press a number followed by a dot “•” and the  
corresponding sub channel number.  
When selecting Digital channel 11.1  
40PFL4708 /  
32PFL4508 /  
29PFL4508 /  
24PFL4508  
40PFL1708 /  
39PFL2708 /  
32PFL3508  
50PFL3708 /  
46PFL3708  
Be sure to press • before entering the subchannel number.  
Analog/Cable TV operation  
* Key on Rear  
When selecting cable or Analog channel 11  
Press PREV.CH to return to the previously viewed channel.  
Note  
To select the non-memorized channels, use the NUMBER buttons.  
No Signal will appear on the TV screen after the subchannel broadcast is over.  
Audio only program message will appear on the TV screen, when you receive only  
sound signal.  
To decrease or increase volume  
* On the 46” & 50” TV’s All CONTROL Keys are located on the Rear  
(lower right) side of the unit as viewed from the Front.  
Press VOL / (1 raised dot on the Rear panel or Front panel)  
or press VOL + / on the Remote control.  
VOL : Volume Down  
VOL : Volume Up  
To mute or unmute sound  
Press  
on the remote control to mute the sound.  
Press  
again or VOL + / to recover the original sound.  
 
English  
19  
Watching channels from an external device  
Switching audio mode  
Switching Each Input Mode can easily switch with the remote control  
between TV (DTV or Analog TV) and external devices when they are  
connected to the unit.  
Digital TV operation  
1 Turn On a set-top box or the connected device.  
• The picture from your set-top box or the connected device  
might appear automatically on the TV screen.  
1 Press SAP to display the currently selected language  
and the number of available languages.  
2 Press SAP repeatedly to cycle through the available  
audio languages.  
11.1  
English 1/3  
If the picture does not appear  
Note  
Available languages differ depending on the broadcast.  
Other is displayed when the audio language cannot be acquired or the acquired  
Press  
SOURCE repeatedly to select the set-top box or the  
languages are other than English, French or Spanish.  
connected device and wait a few seconds till the picture appears.  
Analog/Cable TV operation  
e.g.)  
1 Press SAP to display the currently selected audio mode.  
Source  
11.1  
HDMI1  
HDMI2  
TV  
DTV / Analog TV  
channel  
2 While receiving an MTS broadcast, press repeatedly  
11  
HDMI1  
HDMI2  
HDMI3  
Video  
PC  
SAP / STEREO  
to cycle through the available audio channels.  
e.g.) When all audio are available  
Video  
or  
SAP/STEREO  
SAP/MONO  
SAP/STEREO  
PC  
HDMI3  
Component  
• Pressing reverses the direction of the Input modes.  
2 Use the remote control of the set-top box or the connected device  
STEREO :  
SAP :  
Outputs stereo-audio  
to select channels.  
Outputs second audio program  
Outputs mono-audio  
MONO :  
Sleep timer  
Sleep Timer can set the unit to go into Standby mode after an  
incremental period of time.  
Press SLEEP repeatedly to change the amount of  
Sleep  
120min.  
time (increases the time by 30 minutes up to 120  
minutes).  
Press SLEEP once to call up the display for checking the remaining time.  
To cancel sleep timer, press SLEEP repeatedly until Off is displayed.  
   
English  
20  
For 16:9 video signal  
EasyLink options  
If you have our brand products such as Blu-ray disc player or DVD  
recorder that are compatible with EasyLink functions, connect them to  
this unit via an HDMI cable so you can simply operate various items  
from this unit’s remote control.  
Normal  
4:3  
Movie expand  
Zoom  
Full can also be selected  
after Wide if an HDMI  
device is selected. This  
picture format similarly  
Before you begin:  
You must set On in Device control and EasyLink control. p.30  
Otherwise, LINK does not work even if you connected our brand  
devices to this unit.  
displays like Normal  
.
Full (HDMI device only)  
Wide  
1 Press  
OPTIONS to display EasyLink options menu.  
Original size.  
Normal  
4:3  
EasyLink options  
Shortened horizontally.  
Sidebars appear on both edges of the screen.  
Device-menu  
Device-contents  
Device-favorite  
Vertically stretched to fill the screen.  
Movie expand  
Zoom  
This only crops out the top of the picture.  
Device-menu  
Controls the menu of your connected EasyLink  
device.  
Maximum size without changing its horizontal and vertical  
ratio.  
Device-contents Controls the top menu of your DVD or Blu-ray  
Horizontally stretched picture.  
This crops out the left and right sides of the picture.  
Wide  
discs.  
Device-favorite Controls the pop-up menu of your Blu-ray discs.  
For 4:3 video signal  
2 Use ▲▼or OK on this unit’s remote control to operate the  
desired functions for your devices.  
Note  
Some of EasyLink functions may not be available depending on your EasyLink devices  
Normal  
16:9  
Movie expand  
Zoom  
or discs.  
You must connect this unit to our brand EasyLink devices and be sure its EasyLink  
(HDMI CEC) setting is also set to On.  
We do not guarantee 100% interoperability with other brands of HDMI link compliant  
devices.  
Full can also be selected  
after Wide if an HDMI  
device is selected. This  
picture format similarly  
displays like 16:9  
Full (HDMI device only)  
.
Wide  
Original size.  
Normal  
16:9  
Changing picture format  
Sidebars appear on both edges of the screen.  
Stretched horizontally to fill the screen.  
Display modes can be selected when your TV receives a 16:9 or 4:3  
video signal.  
Three types of display modes can be selected for a PC Input signal.  
Press FORMAT repeatedly to switch the TV aspect ratio.  
Stretched more vertically at the top of the screen.  
This crops out the top of the picture.  
Movie expand  
Maximum size that is more vertically stretched to fill the  
screen.  
This crops out the top and bottom of the picture.  
Zoom  
Wide  
Original size and the edges stretched horizontally to fill the  
screen.  
For PC Input signal  
Normal  
Full  
Unscaled  
This unit can also be connected to your PC that has a DVI terminal.  
Use an HDMI-DVI conversion cable for this Video connection and  
it requires Stereo mini 3.5mm plug Audio cable for Analog Audio  
signal as well.  
Refer to 16:9 video signal on this page if PC has HDMI Output.  
Proportionately stretched picture.  
Normal  
Sidebars appear on both edges of the screen.  
Stretched out of proportion to fill the screen.  
Original size.  
Full  
Unscaled  
   
English  
21  
TV screen information  
You can display the currently selected channel or other information such  
as the aspect ratio on the TV screen.  
In the Digital mode, the detailed broadcasting information for the  
current off the air channel such as program title and program guides are  
displayed.  
1 Press INFO  
.
Digital TV operation  
a
b
c
A Day of Memories  
KABC  
11.1  
d
Rating information:  
US TV: TV-MA  
US TV: TV-14  
US TV: TV-PC  
US TV: TV-G  
US Movie: X  
US Movie: NC-17  
US Movie: R  
English 1/2  
1080i  
HD  
16:9  
e
f
Rating  
CC  
US Movie: PG-13  
g
a Program title  
b Broadcast station  
Analog/Cable TV operation  
c
11  
d
e
SAP / STEREO  
480i  
SD  
4:3  
CC  
TV-PG DLSV  
f
g
c Channel number  
d Audio language (DTV) / audio mode (Analog TV)  
e Program’s image aspect ratio  
f CC (not available if Closed Caption is set to Off)  
g Child lock rating  
2 Press INFO  
to hide the information.  
Note  
When the program guide consists of more than 4 lines, use ▲▼ to scroll to the next  
/ previous lines.  
No description provided. is displayed when the program guide is not provided.  
While the program guide is displayed, the Closed Caption function is interrupted.  
In external Input mode, the following screen is displayed;  
e.g.) When an external device is connected to Video Input jack.  
Video  
SD  
480i  
4:3  
TV-PG DLSV CC  
The information display will automatically disappear in 5 seconds.  
English  
22  
2 Use ▲▼ to select the desired Menu and an item, then press OK  
5 Use more of your TV  
or use ▲▼◄► to determine the setting.  
This section describes the overview of the Main Menu displayed when  
you press  
.
Picture  
The Main Menu consists of the function setting items below.  
Adjusting the Picture Mode or customize the Picture quality  
as your preference.  
Displaying the Main Menu  
1 Press  
to display the Main Menu.  
Sound  
Adjusting the Sound Mode, Equalizer and some other  
Sound functions.  
Picture  
Sound  
Setup  
Features  
Language  
USB  
Settings assistant  
Auto picture  
Backlight  
Contrast  
Brightness  
Color  
Setup  
Personal  
Scanning the Channels available in your area and see what  
the Antenna Signal levels are.  
18  
50  
30  
30  
0
Features  
Tint  
Sharpness  
Advanced settings  
2
Adjusting the Closed Caption, Parental Guide and some  
other useful functions.  
Language  
You can choose English, Spanish or French as your  
Onscreen Language.  
USB  
You can view Picture (JPEG) and Video (Motion JPEG) files  
stored on a USB Memory Stick.  
3 When the Setting is completed, press  
or BACK to exit.  
English  
23  
• You can set a particular Picture Quality using Advanced settings.  
Picture  
Picture  
Sound  
Setup  
Features  
Language  
USB  
Color alignment  
Noise reduction  
Active Control  
Black stretch  
Dynamic contrast  
Gamma  
Normal  
On  
On  
On  
On  
Before you begin:  
You must Set Home in Location. p.31  
Otherwise, personalized Picture and Sound settings will not be  
Memorized after the unit goes into Standby mode.  
*
1 Press  
and use ▲▼ to select Picture then press OK.  
Gamma 2  
Picture  
Sound  
Setup  
Features  
Language  
USB  
Settings assistant  
Auto picture  
Backlight  
Personal  
18  
50  
30  
30  
0
Contrast  
Brightness  
Color  
to set the picture color temperature to  
Personal (Cool, Normal or Warm)  
When you adjust the following settings,  
Personal picture will be set automatically.  
Color  
temperature  
mode  
Tint  
Cursor  
Cursor ►  
Sharpness  
Advanced settings  
2
to decrease contrast  
with red  
to increase contrast  
with red  
Red gain  
Green gain  
Blue gain  
to decrease contrast  
with green  
to increase contrast  
with green  
2 Use ▲▼◄► to select the item you want to adjust, then press  
Color  
alignment  
OK.  
to decrease contrast  
with blue  
to increase contrast  
with blue  
to guide you through the best picture setting  
Settings assistant  
to decrease brightness to increase brightness  
to select the desired setting, then press OK  
(Personal, Standard, Vivid, Sports, Movie, Game and  
Eco)  
When you adjust the following settings, Personal  
picture will be set automatically.  
Red offset  
Green offset  
Blue offset  
with red  
with red  
Auto picture  
to decrease brightness to increase brightness  
with green with green  
to decrease brightness to increase brightness  
with blue with blue  
Cursor ◄  
Cursor ►  
to reduce power  
consumption  
to set the backlight  
brighter  
to set noise reduction to Off  
to reduce noise in an image  
to set Active Control to Off  
Off  
On  
Off  
Backlight  
Noise  
reduction  
to decrease contrast  
to decrease brightness  
to increase contrast  
to increase brightness  
Contrast  
Brightness  
Color  
to adjust backlight for the best picture quality by  
dynamically adjusting the backlight intensity in  
accordance with lighting condition in the room  
to decrease color intensity to increase color intensity  
*Active  
Control  
Ambient On  
to add red  
to soften  
to add green  
to sharpen  
Tint  
to adjust backlight for best picture quality  
based on the incoming video signal  
Sharpness  
Ambient Off  
Off  
to select the desired setting, then press OK  
to set ambient light sensor to Off  
(Color alignment, Noise reduction, Active Control*1,  
Advanced settings  
*Ambient  
light sensor  
Ambient light sensor*2, Black stretch, Dynamic  
to alter the brightness of the TV screen  
automatically by detecting your room lighting  
level.  
On  
contrast and Gamma)  
Note  
to set black stretch to Off  
Off  
On  
Black  
Adjusts backlight for the best picture quality by dynamically adjusting the backlight  
intensity in accordance with lighting condition in the room when Active Control* is  
set to On. Please ensure the room lighting is stable and the light sensor is not blocked.  
stretch  
to enhance black color  
1
to set dynamic contrast to Off  
to enhance contrast in an image automatically  
Off  
Dynamic  
contrast  
*1 50PFL3708 / 46PFL3708 / 40PFL4708 only.  
*2 40PFL1708 / 39PFL2708 only.  
On  
Gamma 1  
Gamma 2  
Gamma 3  
to change the gamma setting  
Gamma  
* This part differs depending on the product you have.  
32PFL3508  
32PFL4508  
29PFL4508  
24PFL4508  
50PFL3708  
40PFL1708  
46PFL3708  
39PFL2708  
40PFL4708  
Active Control  
Ambient light sensor  
-
 
English  
24  
You can set the output mode as a default for the sound mode (Analog  
TV only).  
Sound  
This setting is not interlocked when you change the output mode by  
pressing SAP. Refer to Switching audio mode. p.19  
Before you begin:  
You must set Home in Location. p.31  
Otherwise, personalized Picture and Sound settings will not be  
memorized after the unit goes into Standby mode.  
to output stereo-audio  
Stereo  
Mono  
SAP  
to output mono-audio  
Audio setting  
to output second audio program  
1 Press  
and use ▲▼ to select Sound, then press OK.  
Picture  
Sound  
Setup  
Features  
Language  
USB  
Auto sound  
Equalizer  
Standard  
Setup  
Before you begin:  
Make sure the unit is connected to antenna or cable.  
*
SRS TruSurround XT  
Auto volume leveling  
TV speakers  
On  
Off  
On  
Multichannel  
Stereo  
1 Press  
and use ▲▼ to select Setup, then press OK.  
Digital output format  
Audio setting  
Picture  
Sound  
Setup  
Features  
Language  
USB  
Autoprogram  
Channel list  
Add channels  
Antenna  
2
Use ▲▼◄► to select the item you want to adjust, then press OK.  
to select the desired setting, then press OK  
Personal Standard Vivid Sports Movie Music and News  
SRS  
.
(
,
,
,
,
,
)
Auto sound  
When you adjust the following settings (Equalizer,  
TruSurround XT*, Incredible Surround* and Auto volume  
leveling), Personal sound will be set automatically.  
Adjust the tonal quality for each frequency.  
Cursor ◄  
Cursor ►  
2 Adjust the following items.  
Equalizer  
to adjust each level of tonal quality  
Press BACK to go back to the previous menu.  
This selects sound modes for more spatial or surround sound reproduction.  
to set SRS TruSurround XT® to Off  
to set SRS TruSurround XT® to On  
Autoprogram  
Off  
On  
*SRS  
TruSurround XT  
Be sure the RF cable is correctly connected to this unit and you are  
registered with your cable TV provider when you install Cable channels.  
Incredible Surround gives you the stereophonic virtual space through  
your existing 2-channel stereo system.  
1 Use ▲▼ to select Autoprogram, then press OK.  
Natural effect.  
Off  
On  
*Incredible  
Surround  
• If you run Autoprogram when you have locked channels, a  
message appears asking to enter your PIN. Enter your PIN in  
order to complete the installation. You need to set the channel  
lock again after the installation.  
Emphasized effect.  
* This part differs depending on the product you have.  
SRS TruSurround XT for 40PFL4708, 39PFL2708, 32PFL3508, 32PFL4508,  
29PFL4508, 24PFL4508.  
Incredible Surround for 50PFL3708, 46PFL3708, 40PFL1708.  
2 Use ▲▼ to select an appropriate option, then press OK.  
– When Antenna is selected, the TV detects any off-the-air  
antenna signals. It searches for ATSC (Digital) and NTSC  
(Analog) channels available in your area.  
This function keeps a constant loudness differential between the TV  
commercials and the programs.  
to remove the auto volume leveling  
Off  
On  
Auto volume  
leveling  
– When Cable is selected, the TV detects signals supplied by cable.  
It searches for DTV, Analog TV and Cable channels available in  
your area.  
to reduce volume differences between  
the TV commercials and the programs  
You can select the Audio Output from the unit’s speakers or not. If your  
amplifier is HDMI link function compatible and connected by an HDMI  
cable to this unit, some sound operations such as volume up can be  
changed by using this unit’s remote control.  
Picture  
Sound  
Setup  
Back  
Antenna  
Cable  
Autoprogram will rescan all channels.  
Auto programming may take more than 20  
minutes to complete.  
to output sound from the unit’s speakers  
On  
Off  
not to output sound from the unit’s  
speakers  
Features  
Language  
USB  
Select your signal source.  
Antenna  
TV speakers  
to control Audio Output from your  
Speakers connected EasyLink Compliant Devices  
with VOL + / by using this unit's  
remote control.  
EasyLink  
Cable  
Or  
You can select audio output through a digital audio output connector.  
ANTENNA IN  
to output multichannel signals.  
(When the audio of the content is PCM,  
it will be output in PCM even if  
Multichannel is selected.)  
Multichannel  
PCM  
Digital output  
format  
Continued on next page.  
to output PCM signals.  
     
English  
25  
• When the scanning and memorizing channels are completed, the  
lowest memorized channel will be displayed.  
Add channels  
This function lets you add the off the air Analog TV or Analog Cable  
channels that were not added by the autoprogram due to reception  
conditions during the initial setting.  
Autoprogram  
Please wait while the system is scanning for channels.  
Auto programming may take more than 20 minutes to  
complete.  
1 Use ▲▼ to select Add channels, then press OK.  
2 Use the NUMBER buttons to enter the number of the channel you  
want to add, then press OK.  
Digital channels  
Analog channels  
10 ch  
6 ch  
Picture  
Sound  
Setup  
Features  
Language  
USB  
Add channels  
For analog channels, select a  
channel to be added using  
number keys.  
For digital channels, you must  
perform Autoprogram function.  
Exit  
Note  
After setting Autoprogram, using CH + / skips unavailable programs automatically.  
If you are not receiving a signal from your cable service, contact the Cable provider.  
If you press  
cancelled.  
or  
during autoprogram, the setup of TV channels will be  
Even if Autoprogram is completed, the channel setting will be lost if the AC power  
cord is unplugged before the unit goes into Standby mode by pressing  
The PIN Code will be required once you set a PIN code in the Child and ratings lock.  
If you want to change your PIN code, follow the instruction of Change PIN. p.29  
.
Ch Change  
Back  
Note  
If setup completes successfully, Added to the channel list. is displayed.  
If external Input is used, it is not possible to register the channel and Unavailable will  
be displayed on the TV screen.  
Some channels cannot be selected by CH + / . Use the NUMBER buttons to select  
the memorized channels.  
Channel list  
The channels selected here can be skipped when selecting the channels  
using CH + / .  
Those channels can still be selected with the NUMBER buttons.  
Antenna confirmation  
1 Use ▲▼ to select Channel list, then press OK.  
Digital TV operation  
2 Use ▲▼ to select the channel you want to remove, then press  
This function lets you check the Digital signal strength of each channel.  
1 Use ▲▼ to select Antenna, then press OK.  
OK.  
2 Use the NUMBER buttons or CH + / to select the channel for  
Picture  
Sound  
Setup  
Features  
Language  
USB  
DTV  
DTV  
DTV  
11.1  
11.2  
11.3  
which you want to check the Digital signal strength.  
Highlight channels for  
Ch Up / Down key selection.  
Picture  
Sound  
Setup  
Back  
Features  
Language  
USB  
Current  
Max  
Ch Select  
Watch / Skip  
Back  
• The channel display for the removed channel darkens. You will  
not be able to select the channel again using CH + / .  
To reactivate a removed channel, use ▲▼ and press OK. The  
registered channels are highlighted.  
• When you remove a main channel, its subchannels are removed  
as well.  
Ch Change  
Note  
If the channel is set to Analog channel or external Input, you cannot confirm the  
antenna condition.  
Note  
The channel with DTV indicated on the display is ATSC. Otherwise the channel is  
Analog TV (NTSC).  
 
English  
26  
Analog/Cable TV operation  
The primary caption and text services.  
Features  
The captioning or text is displayed in the  
same language as the program’s dialog  
(up to 4 lines of script on the TV  
screen).  
CC-1 and  
1 Press  
and use ▲▼ to select Features, then press OK.  
T- 1  
Picture  
Sound  
Setup  
Features  
Language  
USB  
Caption settings  
Child lock  
PC settings  
EasyLink  
Serve as the preferred data channels.  
The captioning or text is often a  
secondary language.  
CC-3 and  
Caption service  
T- 3  
Rarely available and broadcasters use  
them only in special conditions, such as  
when CC-1 and CC-3 or T- 1 and T- 3  
are not available.  
CC-2,  
CC-4, T- 2  
and T- 4  
Location  
E-sticker  
Home  
- -  
There are 3 display modes according to programs:  
Software upgrade  
Displays input characters on the TV screen  
immediately.  
Paint-on  
Once characters are stored in memory, they are  
displayed all at once.  
Pop-on  
2 Adjust the following items.  
Displays the characters continuously by scrolling (max.  
4 lines).  
Roll-up  
You can choose the size, font, color, background and other  
characteristics of the caption text.  
Caption settings  
Closed Captioning displays the audio portion of programming as text  
superimposed over the video.  
Font style  
Closed Captioning  
Font size  
Font color  
Font opacity  
font style, size, color  
and transparency can  
be changed.  
1 Use ▲▼ to select Caption settings, then press OK.  
Font  
Picture  
Sound  
Setup  
Features  
Language  
USB  
Closed Caption  
Caption service  
Digital caption service  
Caption style  
Off  
CC-1  
CS-1  
Background  
color  
Background color  
and transparency of  
the displayed caption  
can be switched.  
Caption style  
Background  
Edge  
Background  
opacity  
Edge color and type  
of the displayed  
caption can be  
switched.  
Edge color  
Edge type  
Picture display  
2 Use ▲▼◄► to select the item you want to adjust, then press  
So, you must bee Philip. Hi!  
I’m pleased to meet you.  
OK.  
You can choose the closed caption display.  
Font  
Closed caption is not displayed.  
Closed caption is always displayed.  
Off  
On  
(Font style, Font size, Font color and Font opacity)  
Edge  
(Edge color and Edge type)  
Closed Caption  
Note  
Closed caption is displayed when the  
sound is off.  
CC w/  
mute  
Background  
(Background color and Background opacity)  
• Review your setting choice made below by looking in the upper  
right corner of the displayed setting box (not all selections show  
the differences selected).  
You can cycle through the Closed Caption settings by pressing CC.  
Digital TV operation  
Continued on next page.  
In addition to the basic Closed Caption, DTV has its own Closed  
Caption called Digital caption service. Use this menu to change the  
settings for Digital caption service.  
Selects one of these before changing any  
Digital caption  
service  
CS-1 to other item in Caption settings menu.  
Choose CS-1 under normal  
circumstances.  
CS-6  
   
English  
27  
See the following description for setting each item.  
Note  
Digital caption service that you can switch differs depending on the broadcast  
description.  
Caption style will not effect if the User setting is set to Off.  
Closed Captioning service may not be controlled by this unit’s menu options if you are  
watching television through an external cable or satellite set-top box. In which case  
you will need to use the menu options on the external set-top box to control Closed  
Captioning.  
The captions do not always use correct spelling and grammar.  
Not all TV programs and product commercials include Closed Caption information.  
Refer to your area TV program listings for the TV channels and times of Closed  
Caption shows. The captioned programs are usually noted in the TV listings with  
service marks such as CC.  
Not all captioning services are used by a TV channel during the transmission of a  
Closed Caption program.  
Picture  
Sound  
Setup  
Features  
Language  
USB  
Channel lock  
US movie ratings lock  
US TV ratings lock  
Canadian English rating  
Canadian French rating  
Region ratings lock  
Change PIN  
Closed Caption will NOT be displayed when you are using an HDMI connection.  
To show the Closed Caption on your TV screen, broadcast signal must contain the  
Closed Caption data.  
Not all TV programs and commercials have the Closed Caption or all types of the  
Closed Caption.  
Note  
Captions and texts may not exactly match the TV voice.  
Changing channels may delay the Closed Caption for a few seconds.  
Adjusting or muting the volume may delay the Closed Caption for a few seconds.  
Abbreviations, symbols and other grammatical shortcuts may be used in order to keep  
pace with the on-screen action. This is not a malfunction.  
The caption or text characters will not be displayed while the main menu or functions  
display is shown.  
If a black box appears on the TV screen, this means that the Closed Caption is set to  
the text mode. To clear the box, select CC-1, CC-2, CC-3or CC-4.  
If the unit receives poor quality television signals, the captions may contain errors or  
there might be no captions at all. Some possible causes of poor quality signals are:  
Automobile ignition noise  
Electric motor noise  
Weak signal reception  
Multiplex signal reception (ghosts or screen flutter)  
Data dropout and Pixelation (for DTV only)  
The unit retains the Closed Caption setting if the power fails.  
When the unit receives special effects playback signal (e.g. Search, Slow and Still) from  
a VCR’s video Output channel (ch3 or ch4), the unit may not display the correct  
caption or text.  
The EUT setting that satisfies § 79.102 (e) is as follows:  
Font: Mono-font  
Character size: Large  
When you select a rating and set it to  
automatically. The lower ratings will be available for viewing.  
When you set the highest rating to , all ratings turn to  
To block any inappropriate programs, set your limits in US movie ratings lock, US TV  
ratings lock and Region ratings lock.  
The child lock setting will be retained after a power failure or after the power is  
removed for longer than 10 seconds (except the PIN code reverts to 0000).  
Region ratings lock and Clear region ratings lock will be available when the unit  
receives a Digital broadcast using the new rating system.  
For the United States, the unit may download the Region Ratings Lock Table, if  
required.  
The Canadian rating systems on this unit are based on CEA-766-A and CRTC policy.  
or , the higher ratings will be blocked  
automatically.  
Channel lock  
Particular channels or external Input modes can be invisible in this  
function.  
3 Use ▲▼ to select Channel lock, then press OK.  
4 Use ▲▼ to select the particular channels or external Input, then  
press OK repeatedly to switch between view and block.  
Child and ratings lock  
indicates that the channel or Input Source is locked.  
indicates that the channel or Input Source is not locked.  
You can prevent your children from watching certain programs or  
certain channels by locking the TV controls and by using ratings.  
Picture  
Sound  
Setup  
Features  
Language  
USB  
1 Use ▲▼ to select Child lock, then press OK.  
HDMI1  
HDMI2  
HDMI3  
Picture  
Sound  
Setup  
Features  
Language  
USB  
Caption settings  
Child lock  
PC settings  
EasyLink  
Video  
PC  
40.1  
40.2  
DTV  
DTV  
Location  
Home  
- -  
E-sticker  
Software upgrade  
2 Use the NUMBER buttons to enter the 4-digit numbers for your  
PIN code.  
• When you have not set up your PIN code, enter 0, 0, 0, 0.  
• When the PIN code is correct, Child lock menu is displayed.  
 
English  
28  
To set the sub ratings  
As for TV-Y7, TV-PG, TV-14 or TV-MA, you can further set the sub  
Setting US movie and TV ratings  
ratings to block specific elements of programming. To set the sub ratings,  
follow the step below.  
Use ▲▼ ◄► to select the desired rating, then press OK repeatedly to  
US movie ratings lock is the rating system created by MPAA.  
US TV ratings lock has controlled access to individual programs based  
on their age ratings and content rating.  
switch between and  
.
3 Use ▲▼ to select US movie ratings lock or US TV ratings lock,  
then press OK.  
Picture  
Sound  
Setup  
All  
4 Use ▲▼ to select the desired rating, then press OK repeatedly to  
(FV) Fantasy Violence  
None  
TV-Y  
switch between view and block.  
• For US TV ratings, you can further set the sub ratings to block  
specific elements of programming.  
Features  
Language  
USB  
TV-Y7  
TV-G  
or  
indicates that the rating is locked.  
indicates that the rating is not locked.  
TV-PG  
TV-14  
TV-MA  
US movie ratings lock  
Picture  
All  
Sound  
Setup  
Features  
Language  
NR  
US TV ratings  
TV-Y7  
Sub Rating  
G
(FV) Fantasy Violence  
PG  
(D) Dialog  
(L) Language  
(S) Sex  
TV-PG  
PG-13  
USB  
R
TV-14  
(V) Violence  
NC-17  
X
(L) Language  
(S) Sex  
(V) Violence  
TV-MA  
Note  
Blocked sub rating will appear beside the main rating category in US TV ratings lock  
menu.  
US TV ratings lock  
You cannot block a sub rating if the main rating is set to  
Changing the category to or automatically changes all its sub ratings to the same  
or ).  
.
Picture  
Sound  
Setup  
All  
(
None  
TV-Y  
Features  
Language  
USB  
TV-Y7  
TV-G  
TV-PG  
TV-14  
TV-MA  
US movie  
ratings  
US TV ratings Description  
All ratings locked including no rating  
All  
No rating  
NR  
None  
TV-Y  
TV-Y7  
TV-G  
TV-PG  
Appropriate for all children  
Appropriate for all children 7 and older  
General audience  
G
Parental guidance suggested  
Unsuitable for children under 13  
Unsuitable for children under 14  
PG  
PG-13  
TV-14  
Restricted under 17 requires accompanying  
parent or adult guardian  
R
No one under 17 admitted  
Mature audience only  
NC-17  
X
TV-MA  
English  
29  
Canadian English or Canadian French ratings  
PC settings  
You can select the rating for Canadian English or Canadian French  
broadcasting.  
This function lets you adjust the PC screen position, clock and phase  
during PC Input.  
3 Use ▲▼ to select Canadian English rating or Canadian French  
Use ◄► to adjust Clock setting to stabilize the PC screen and Phase  
setting to improve the clarity of the PC screen.  
rating, then press OK.  
1 Use ▲▼ to select PC settings, then press OK.  
4 Use ▲▼ to select the desired rating, then press OK repeatedly to  
switch between view and block.  
indicates that the rating is locked.  
indicates that the rating is not locked.  
Picture  
Sound  
Setup  
Features  
Language  
USB  
Auto adjustment  
Canadian  
English rating French rating  
Canadian  
Horizontal position  
Vertical position  
Clock  
0
0
0
0
Description  
Locked all ratings  
All  
E
Exempt program  
Phase  
For all children  
C
For children over 8  
C8+  
General audience  
G
Unsuitable for ages under 8  
Parental guidance suggested  
Unsuitable for ages under 13  
Unsuitable for ages under 14  
Unsuitable for ages under 16  
Adult audience only  
PG  
8ans+  
2 Use ▲▼ to select the item you want to adjust, then press OK.  
• The horizontal/vertical position, clock and phase of the PC  
screen are automatically adjusted.  
13ans+  
14+  
Select if you want to adjust automatically.  
Auto adjustment  
16ans+  
18ans+  
Cursor ◄  
Cursor ►  
18+  
to move PC screen left  
to move PC screen right  
to move PC screen up  
Horizontal position  
Vertical position  
Note  
to move PC screen  
down  
The V-Chip can block non rated programs as per “CEA-608-E sec. L.3”. If the option  
to block NR, None or E programs is used in US movie ratings lock, US TV ratings  
lock, Canadian English rating or Canadian French rating accordingly “unusual results  
may occur and the unit may not receive emergency bulletins or other types of  
programming”: / Emergency Bulletins (Such as EAS messages, weather warnings and  
others) / Locally originated programming / News / Political / Public Service  
Announcements / Religious / Sports / Weather.  
Clock  
Phase  
to decrease setting value to increase setting value  
Note  
You may not obtain an appropriate screen with Auto adjustment for some signals. In  
this case, adjust the settings manually.  
Adjust Phase setting after Clock setting has been properly adjusted.  
Change PIN  
Although the default PIN code (0000) is supplied with the unit, you can  
set your own PIN code.  
3 Use ▲▼ to select Change PIN, then press OK.  
4 Press the NUMBER buttons to enter the new 4-digit PIN code.  
• Enter PIN code again in Confirm PIN. entry field.  
Picture  
Sound  
Setup  
Enter PIN.  
Features  
Language  
USB  
Confirm PIN.  
PIN Code  
Back  
Note  
Make sure new PIN code and confirm PIN code must be exactly the same. If they are  
different, the space is cleared for reentering.  
Your PIN code will be erased and returns to the default PIN code (0000) when a  
power failure occurs.  
If you forget the PIN code, unplug the AC power cord then wait for 10 seconds to  
plug the AC power cord in again.  
The unit will restore the PIN code to 0000 as the factory default.  
 
English  
30  
Device list  
EasyLink (HDMI CEC)  
This function lets you see the product model number or name of  
connected devices.  
Use ▲▼ to select the desired EasyLink devices listed on the TV screen,  
This function allows you to operate the linked functions between our  
brand devices with a EasyLink feature and this unit connecting through  
an HDMI cable. You must connect this unit to our brand EasyLink  
devices and be sure its EasyLink setting is also set to On.  
then press OK.  
Your connected EasyLink device will be Turned On if the device is in  
Stand by mode.  
1 Use ▲▼ to select EasyLink, then press OK.  
Picture  
Sound  
Setup  
Features  
Language  
USB  
Picture  
Sound  
Setup  
Features  
Language  
USB  
Master EasyLink  
Auto device off  
Auto TV on  
Device control  
Device list  
On  
On  
On  
On  
HDMI1 DVD recorder  
HDMI2 Blu-ray disc player  
HDMI3 Home theater system  
Input Change  
Refresh  
Back  
2 Use ▲▼◄► to select the item you want to adjust, then press  
OK.  
Set the EasyLink control On or Off. The following additional settings will  
be grayed out when you set to Off.  
Disables all EasyLink.  
Off  
Selects if you have connected an  
external device that is compatible with  
the EasyLink function.  
Master EasyLink  
On  
You can set your device to Turn Off by interlocking from this unit’s  
power.  
Your connected EasyLink device stays on  
Off  
even if the unit goes into Standby mode.  
Auto device off  
Your connected EasyLink device Turns  
Off automatically when the unit goes  
into Standby mode.  
On  
This unit will Turn On when the Power On signal is sent from your  
connected EasyLink device.  
This unit stays in Standby mode even if  
you Turn On your connected EasyLink  
device.  
Off  
On  
Auto TV on  
This unit Turns on automatically when  
you Turn On your connected EasyLink  
device.  
You can operate some functions such as disc playback or call up the  
menu of the connected devices, by using this unit’s remote control.  
Disables the device control.  
Off  
PLAY B / STOP C / FWD D / REV  
Device control  
E /  
OPTIONS / ▲▼◄► / OK /  
On  
BACK / the NUMBER buttons can be  
used to control your connected EasyLink  
devices by this unit’s remote control.  
 
English  
31  
Setting your location to home  
Language  
You can set the Location of your TV to Home or Retail. Choosing  
Home gives you full flexibility to change predefined settings for picture  
and sound.  
1 Press  
and use ▲▼ to select Language, then press OK.  
1 Use ▲▼ to select Location, then press OK.  
Picture  
Sound  
Setup  
Features  
Language  
USB  
Select your menu language.  
English  
Picture  
Sound  
Setup  
Features  
Language  
USB  
Caption settings  
Child lock  
PC settings  
EasyLink  
Seleccione el idioma para el menú.  
Sélectionnez la langue du menu.  
Español  
Français  
Location  
Home  
- -  
E-sticker  
Software upgrade  
2 Use ▲▼ to select English, Español or Français, then press OK.  
Note  
2 Use ▲▼ to select Home or Retail, then press OK.  
If you need the English menu instead of the Spanish or French menu’s, press  
Use ▲▼ to select Idioma or Langue, then press OK.  
Use ▲▼ to select English then press OK.  
.
The unit will be set up with predefined settings for retail  
displays. In this setting, the power consumption may  
Retail  
Press  
to exit the main menu.  
possibly exceed the limit requirement of the ENERGY  
STAR® qualification.  
This setting is ENERGY STAR® qualified.  
The unit is set to maximize the energy efficiency for Home  
setting and it can be adjusted through a choice of Picture  
and Sound quality selections according to your preference.  
Home  
Note  
You must set Home. Otherwise, personalized picture and sound settings will not be  
memorized after the unit goes into Standby mode.  
E-sticker  
When you set Location to Retail store, E-sticker (Electronic Sticker) is  
displayed. E-sticker can be Turned Off using procedure below.  
1 Use ▲▼ to select E-sticker, then press OK.  
2 Use ▲▼ to select Off, then press OK.  
You can Turn Off E-sticker.  
Off  
E-sticker is displayed on top of the TV screen.  
E-sticker is displayed on bottom of the TV screen.  
Top  
Bottom  
Note  
If you select Home, E-sticker will not be displayed.  
     
English  
32  
Picture (JPEG)  
USB  
1 Use ▲▼ to select the desired file, then press OK.  
Your TV is fitted with a USB connection that enables you to view photos  
or watch Motion JPEG files stored on a USB Memory Stick.  
Your USB  
Picture  
Picture Picture  
1 Connect the USB Memory Stick to the USB terminal on the side of  
your TV.  
2 Press  
and use ▲▼ to select USB, then press OK.  
• The highlighted text will move to the name of your USB Memory  
Stick, then press OK again.  
Picture  
Your USB  
Sound  
Setup  
This menu allows you to enjoy  
your pictures and videos via  
your USB device.  
1
2
3
4
Thumbnails  
Press “OK” key to play/pause  
Features  
Language  
USB  
To toggle between List and Thumbnails press the NUMBER 2  
button each time.  
• The unit goes to the Slide show automatically.  
To pause / play the Slide show, press OK.  
• Use the NUMBER buttons (1 through 4) to see the file detail  
( 1 ) or change the following settings ( 2 ~ 4 ).  
See the description in table below.  
Item  
Detail  
Press 1 to display file details below.  
Name, Album, Date, Size and Next.  
Press 1 again to remove file details.  
1
3 Use ▲▼ to select the Picture or Video, then press OK.  
More Detail  
• The files recorded under the following specifications are required.  
Press 4 or OK to start the Slide show.  
While the Slide show is on, the following 2 settings will be  
displayed.  
4
Picture (JPEG) Upper limit 24Mpixel  
Start show  
Size  
320 x 240 (QVGA)  
Press 2, then use ▲▼ to select the transition mode  
choosing from;  
None, Dissolve, Wipe right, Wipe left, Wipe up, Wipe  
down, Box in and Box out.  
Press 3, then use ▲▼ to change the display time choosing  
from; Short, Medium and Long.  
Frame rate 30fps  
2
Video  
(Motion JPEG)  
Transitions  
Sampling frequency  
Audio type LPCM (32 kHz, 44.1 kHz or 48 kHz)  
Quantization bit rate (16 bit)  
3
Slide time  
Note  
Press 4 or OK to stop the Slide show.  
While the Slide show is Off, the following 2 settings will be  
displayed.  
4
Up to 2GB (FAT16) or 8GB (FAT32) capacity can be supported.  
Up to 10,000 files or 1,000 folders with 19 hierarchies can be recognized.  
Up to 255 English characters can be recognized.  
Stop show  
This unit does not support MTP (Media Transfer Protocol).  
This unit supports FAT16 and FAT32 file systems.  
Every press on 2 will turn the picture clockwise by 90  
2
degrees.  
Rotate  
If the file is not supported, an error message appears.  
When the USB Memory Stick is not recognized, try reconnecting it again.  
We cannot be held responsible if your USB Memory Stick is not supported, nor will  
we accept any liability for damage or loss of stored data.  
To protect your USB Memory Stick files from being erased place the write protect  
sliding tab in the protect position.  
Press 3, then use ▲▼ to select the zoom factor (1x, 2x  
or 4x). Press OK to set the zoom factor.  
3
Zoom  
Video (Motion JPEG)  
Be sure to keep a backup copy of the original files on your device before you play  
them back on this unit.  
This unit does not recognize USB Memory Stick that requires a special driver.  
This unit is not allowed to use the USB Memory Stick which requires an external  
power supply (500mA or more).  
A file name exceeding 128 characters or contains a dot character is not supported on  
this TV.  
Progressive JPEG files are not supported.  
Only a Motion JPEG file with an “.avi” extension is supported. An extension “.mov” is  
not supported.  
During Motion JPEG playback, “Pause”, “Forward” and “Reverse” do not work on this  
unit.  
1 Use ▲▼ to select the desired file, then press OK.  
Your USB  
Video  
Video Video  
1
2
3
4
Supported format: motion jpeg, 320 x 240, 30FPS  
To stop playback and return to the file list, press BACK, OK or  
CH +.  
• Press CH to play back from the beginning.  
Item  
Detail  
Press 1 to display file details below.  
Title, Director, Date and Duration.  
Press 1 again to remove file details.  
1
More Detail  
 
English  
33  
Downloading the software  
6 Upgrade your TV software  
Find information and software related to your TV and download the  
latest software upgrade file to your PC.  
Philips continuously tries to improve its products and we strongly  
recommend that you upgrade the TV software when upgrades are  
available.  
1 On your PC, open a web browser and go to  
New software can be downloaded from our website at  
2 Enter the model number in the “Type the Model Number...” field.  
using the model number of your TV to find information.  
3 Click the desired software to be downloaded.  
• Decompress the ZIP-file.  
4 Copy the upgrade file to the root directory of the USB Memory  
Checking your current software version  
Stick.  
1 Press  
and use ▲▼ to select Features, then press OK.  
Starting the software upgrade  
2 Use ▲▼ to select Software upgrade, then press OK.  
Warning  
When the software upgrade is running, don’t press any buttons.  
Do not remove the USB Memory Stick during the software upgrade.  
If an error occurs during the upgrade, retry the procedure or for further assistance,  
please contact Call Center.  
Picture  
Sound  
Setup  
Features  
Language  
USB  
Current software info  
Upgrade  
1 Connect your USB Memory Stick with the upgrade file to the USB  
terminal on the side of your TV.  
3 Use ▲▼ to select Current software info, then press OK.  
• The version and a description of the current software is  
displayed.  
Picture  
Sound  
Setup  
Back  
Release Version:  
XXXXXXX_XX_XX_XXXX_XX  
Features  
Language  
USB  
2 Press  
and use ▲▼ to select Features, then press OK.  
3 Use ▲▼ to select Software upgrade, then press OK.  
4 Use ▲▼ to select Upgrade, then press OK.  
5 Read the on-screen instructions and confirm that you want to  
continue with the installation.  
Picture  
Sound  
Setup  
Features  
Language  
USB  
Start now  
Would you like to upgrade the  
software?  
Upgrading the software  
You can upgrade the software by using USB Memory Stick.  
Preparing for the software upgrade  
You require the following equipment :  
A PC with web browsing capability.  
An archive utility that supports the ZIP-format  
(e.g. WinZip for Windows or Stuffit for Mac OS).  
An empty clean formatted USB Memory Stick.  
6 When the software upgrade is completed, press to set the unit  
into Standby mode, then remove the USB Memory Stick and then  
press again to Turn the unit On.  
Note  
• The TV starts up with the new software.  
For further assistance, please contact Call Center.  
Only FAT / DOS-formatted portable memory is supported.  
Use only software upgrades that can be found on the Philips web site.  
English  
34  
7 Useful tips  
FAQ  
Question  
Answer  
My remote control does not  
work.  
What should I do?  
• Check the antenna or cable connection to the main unit.  
• Check the batteries of the remote control.  
• Check if there is an obstacle between the infrared sensor window and the remote control.  
Test the signal Output use IR Signal Check. p.36  
If okay, then possible infrared sensor trouble.  
• Aim the remote control directly at the infrared sensor window on the front of the unit.  
• Reduce the distance to the unit.  
• Re-insert the batteries with their polarities (+/–) as indicated.  
• When there is an infrared-equipped device such as PC near this unit, it may interrupt the remote control signal of this unit. Move the  
infrared-equipped device away from this unit, change the angle of the infrared sensor or Turn Off the infrared communication  
function.  
How come the Initial setup  
appears every time I Turn On  
this unit?  
• Connect the RF coaxial cable to the unit directly and run the initial setup.  
• Make sure to complete the initial setup before the unit goes into Standby mode.  
Why can I not watch some RF  
signal TV programs.  
• Autoprogram must be completed when you set up the unit for the first time or move it to a location where previously unavailable  
channels are broadcast.  
• Make sure Autoprogram has been completed. p.24  
• The selected channel may not be broadcasting.  
• When Autoprogram is interrupted and not completed, some channels will not be received. Make sure to complete the  
Autoprogram. p.24  
• The selected channel cannot be viewed by the Child and ratings lock setting. p.27  
• The unit requires some kind of antenna Input. An indoor antenna (Digital or VHF / UHF), an external antenna (Digital or VHF / UHF)  
or an RF coaxial cable from your wall Cable / Satellite set-top box needs to be plugged into the unit.  
How come there is no image  
from the connected external  
devices?  
• Check if the correct Input mode is selected by pressing  
SOURCE or using CH + / . Refer to Watching channels from an  
• Check the antenna, cable or other Input connection to the unit.  
• When using the Component Video connection check that the Green (Y), Blue (Pb/Cb) and Red (Pr/Cr) connectors are connected  
to their corresponding colored jacks on the unit.  
When I enter a channel number, • Many Digital channels have alternate channel numbers. The unit changes the numbers automatically to the ones signifying the  
it changes automatically.  
broadcasting station channel number. These basic numbers used for previous Analog broadcasts. (e.g., Input ch# 30 automatically  
changes to ch# 6.1)  
Why are captions not displayed • Captions that are delayed a few seconds behind the actual dialog are common for live broadcasts. Most captioning production  
entirely? Or, captions are  
delayed behind the dialog.  
companies can display a dialog to maximum of 220 words per minute. If a dialog exceeds that rate, selective editing is used to insure  
that the captions remain up-to date with the current TV screen dialog.  
How can I set the clock?  
• There is no clock function on this unit.  
I cannot change the Child lock  
setting because my PIN code no  
longer works.  
• If a Power failure occurs for longer than 10 seconds the child lock setting is retained, but the PIN code is reset to the default code  
English  
35  
Troubleshooting  
If the unit does not perform properly when operated as instructed in this User Manual,  
check the following Troubleshooting tips and all connections once before calling for service.  
Power  
No power  
Adjusted Picture or Sound settings are not effective every time the unit is  
Turned On.  
You must set Home in Location. p.31 Otherwise, the settings you  
adjusted will not be memorized after the unit goes into Standby mode.  
You see a distorted picture or hear an unusual sound.  
You may be getting interference from electrical appliances, automobiles,  
motorcycles or fluorescent lights.  
Try moving the unit to another location to see if this is the cause of the  
problem.  
Ghosts, lines or streaks in picture. (Analog TV- NTSC signal)  
• Electrical interference from nearby appliances may affect picture quality.  
• Make sure the AC power cord is plugged in.  
• Make sure that the AC outlet supplies the proper voltage, plug another  
electrical appliance into the AC outlet to ensure that the AC outlet  
operates normally.  
• If a power failure occurs, unplug the AC power cord for 1 minute to allow  
the unit to reset itself.  
Remote  
Control buttons do not work.  
• Press only one button at a time. Do NOT press more than one button at  
the same time.  
• Ensure that no buttons on the remote control are depressed and move  
freely.  
• View other TV channels. The problem might be limited to the broadcasting  
station or weak signal strength.  
Sound  
Universal remote control does not work properly.  
• Refer to the user manual of the universal remote control for the Philips  
code.  
No sound, distorted sound or incorrect Audio Sound is heard when using the  
HDMI-DVI connections.  
• Make sure that the Analog Audio signals from the HDMI-DVI device are  
connected to the Analog Audio (L/R) Input jacks.  
• When using Component Analog Video, Composite Analog Video or PC  
VGA Video make sure that the Analog Audio (L/R) connectors are  
mounted into the Audio (L/R) Input jacks.  
Picture  
Power is ON but no screen image.  
• Check whether the connection of the Antenna or Cable / Satellite set-top  
box is connected correctly.  
• Check whether all the cables to the unit are connected to the correct  
Output jack of your device like Blu-ray disc / DVD recorder.  
• Make sure that the selected Input mode is connected to the working Input  
jack.  
• Check if your computer is NOT in sleep mode when the Input mode of this  
unit is in PC mode. Tap any key on the keyboard to wake up your computer.  
Sound poor, Picture OK  
• View other TV channels. The problem might be limited to the broadcasting  
station or weak signal strength.  
• Check if the audio cable is connected into the unit correctly.  
You switch to a different Input and the volume changes.  
• This unit will memorize the volume level from the last time you adjusted it.  
• If the volume of the sound from another device is higher or lower, then the  
loudness will change.  
No color  
• View other TV channels. The problem might be limited to the broadcasting  
station or weak signal strength.  
• Make sure Auto volume leveling is set to On. p.24  
• Adjust Color in Picture settings. p.23  
Screen  
Picture poor, sound OK  
You switch to a different Input and the screen size changes.  
• This unit will memorize the viewing mode from the last time you used the  
particular Input modes.  
• Electrical interference from nearby appliances may affect picture quality.  
• Adjust Contrast and Brightness in Picture settings. p.23  
• View other TV channels. The problem might be limited to the broadcasting  
station or weak signal strength.  
The display image does not cover the entire screen.  
• If you are using the unit as a PC monitor, make sure that Horizontal  
position and Vertical position in PC settings are set correctly.  
• If you are watching TV or using the Composite Video, Component Video or  
HDMI with 480i Input, press FORMAT repeatedly to switch various screen  
modes.  
• For the best picture quality, watch High Definition wide screen programs. If  
the HD content is not available, watch Standard Definition programs  
instead.  
You see noise or trash on the screen.  
• When the capabilities of the unit exceed the capabilities of the Digital  
broadcasting, the signal will be increased to match the capabilities of the  
display of the unit. This may cause noise or trash.  
Unusual picture appears and the TV does not operate.  
• Press the power button first. If it does not solve the problem, then press the  
buttons on the remote control in the order shown below.  
Different color marks on the TV screen  
• View other TV channels. The problem might be limited to the broadcasting  
station, missing data or pixelation.  
Captions  
Captions are displayed as a white box. No caption is displayed in the Closed  
Caption-supported program.  
• Interference from buildings or weather conditions may cause captioning to  
be incomplete if watching Analog TV signals.  
SLEEP  
FORMAT  
Picture & Sound  
• Broadcasting station may shorten the program to insert advertisements.  
• The Closed Caption decoder cannot read the information of the shortened  
program.  
Black box is displayed on the TV screen.  
• The text mode is Selected. For caption, select CC-1, CC-2, CC-3 or CC-4.  
No picture or sound  
• Check if the Power is on.  
• Check whether all the cables to the unit are connected to the correct  
Output jack of your device like Blu-ray / DVD recorder.  
• View other TV channels. The problem might be limited to the broadcasting  
station or weak signal strength.  
• Unplug the AC power cord and wait for about 1 minute, then plug the AC  
power cord and Turn On the unit again.  
Note  
• Check whether the connection of the Antenna or Cable / Satellite set-top  
box is connected correctly.  
• Make sure that the selected Input mode is connected to the working Input  
jack.  
• Check if your computer is NOT in sleep mode when the Input mode of this  
unit is in PC mode. Tap any key on the keyboard to wake up your computer.  
The LCD screen is manufactured to provide many years of useful life. Occasionally a  
few non active pixels may appear as a fixed point of blue, green or red.  
This is not to be considered a defect in the LCD screen.  
Some functions are not available in specific modes, but this is not a malfunction. Read  
the description in this User Manual for more details on correct operations.  
• Make sure that the sound is not muted. Press  
so that the volume bar  
and current volume level will appear on the TV screen.  
• Make sure that the volume is NOT set to 0 or  
. If so, use VOL + / to  
adjust to the desired volume.  
English  
36  
8 Information  
Glossary  
Maintenance  
Analog TV (NTSC)  
Cabinet Cleaning  
Acronym that stands for National Television Systems Committee and  
the name of Analog broadcasting standards.  
Off the air Analog TV signals are no longer being sent by major  
broadcasting stations in the USA.  
Wipe the front panel and other exterior surfaces of the unit with a  
soft cloth.  
Never use a solvent or alcohol. Do not spray insecticide liquid near  
the unit. Such chemicals may cause damage and discoloration to the  
exposed surfaces.  
Aspect ratio  
The width of a TV screen relative to its height. Conventional TVs are 4:3  
(in other words, the TV screen is almost square); widescreen models are  
16:9 (the TV screen is almost twice as wide as its height).  
Panel Cleaning  
Wipe the panel of the unit with a soft cloth. Before cleaning the panel,  
disconnect the AC power cord.  
CEC (Consumer Electronics Control)  
Servicing  
This allows you to operate the linked functions between our brand  
devices with CEC feature and this unit. We do not guarantee 100%  
interoperability with other brands of CEC compliant devices.  
Should your unit become inoperative, do not try to correct the problem  
yourself. There are no user serviceable parts inside. Call our toll free  
customer support line found on the cover of this User Manual to locate  
an authorized service center.  
Component Video  
This is a video signal format that conveys each of 3 principal colors of  
light (red, blue and green) through different signal lines. This allows the  
viewers to experience picture colors as original as it is. There are several  
signal formats, including Y / Pb / Pr and Y / Cb / Cr.  
IR Signal Check  
If the Remote Control is not working properly, you can use a Digital or  
Cell Phone Camera to see to see if it is sending out an infrared signal.  
e.g.) With a Digital camera:  
Dolby Digital  
Point the Digital Camera towards the Remote  
Control infrared diode at the front of the Remote  
Control. Press any key on the Remote Control and  
look at the Camera Display. If an infrared pulsating  
light appears on the Display, the Remote Control is  
sending out an IR signal.  
The system developed by Dolby Laboratories to compress Digital  
sound. It offers stereo sound (2ch) or multi-channel audio.  
DTV (ATSC)  
Initialism that stands for Advanced Television Systems Committee and  
the name of the Digital broadcasting standards.  
Note: Some Cameras have an IR Filter and will not  
Display the IR signal.  
E-sticker  
E-sticker is showing set features, technical information, etc on this TV set  
that is displayed on the TV screen mainly used by TV retailers. Previously  
the information was on a printed sticker that was put on the display.  
HDMI (High-Definition Multimedia Interface)  
Interface that supports all uncompressed, Digital Audio / Video formats  
including set-top box, Blu-ray / DVD recorder or Digital television, over  
a single cable.  
HDTV (High Definition TV)  
Ultimate Digital format that produces high resolution and high picture  
quality.  
PIN code  
A stored 4-digit number that allows access to parental control features.  
SAP (Secondary Audio Program)  
Second-audio channel delivered separately from main-audio channel.  
This audio channel is used as an alternate in bilingual broadcasting.  
SDTV (Standard Definition TV)  
Standard Digital format that is similar to the Analog TV picture quality.  
®
SRS TruSurround XT  
Creates a truly immersive surround sound experience with rich bass and  
clear dialog from only two speakers.  
 
English  
37  
9 Specifications  
Model #  
50PFL3708 46PFL3708 40PFL4708 40PFL1708 39PFL2708 32PFL3508 32PFL4508 29PFL4508 24PFL4508  
Picture  
Type  
FHD (1920 x 1080 pixels 60Hz)  
49.5"/ 16:9 46.0"/ 16:9 40.0"/ 16:9  
176° (V) by 178° (V) by 176° (V) by 178° (V) by 176° (V) by  
WXGA (1366 x 768 pixels 60Hz)  
Diagonal screen size /  
Aspect ratio  
38.6"/ 16:9  
31.5"/ 16:9  
28.5"/ 16:9 23.6"/ 16:9  
176° (V) by 176° (H)  
Viewing angles  
178° (V) by 178° (H)  
176° (H) 178° (H) 176° (H) 178° (H) 176° (H)  
Built-in Digital / Analog tuner  
ATSC (Digital) / NTSC (Analog)  
Sound  
®
Mono, Stereo, SRS TruSurround XT (for 40PFL4708, 39PFL2708, 32PFL4508, 32PFL3508, 29PFL4508, 24PFL4508)  
Mono, Stereo, Incredible Surround (for 50PFL3708, 46PFL3708, 40PFL1708)  
Mono / Stereo  
Power Output (RMS watts)  
Equalizer  
10 W x 2  
8 W x 2  
5 band  
5W x 2  
Ease of use  
SD (4:3 Source) :  
Normal / 16:9 / Movie expand / Zoom / Wide  
Normal / 4:3 / Movie expand / Zoom / Wide  
Normal / 16:9 / Movie expand / Zoom / Wide / Full  
Normal / 4:3 / Movie expand / Zoom / Wide / Full  
Normal / Full / Unscaled  
HD (16:9 Source) :  
HDMI AV (4:3 Source) :  
HDMI AV (16:9 Source) :  
PC Source :  
Picture format  
(Refer to HDMI AV (16:9 Source) above if PC has HDMI Output.)  
Photo Slide show  
Video playback  
JPEG files only  
Only Motion JPEG 320 x 240, 30fps with file extension "avi" will playback  
Channel  
Terrestrial DTV (ATSC):  
VHF:  
UHF: 14~69 (each channel has e.g. 2.1~2.9, 3.1~3.9, etc)  
VHF: 2~13  
UHF: 14~69  
2~13  
Channel coverage  
Terrestrial Analog (NTSC) :  
2~13, A~W  
CATV (Analog NTSC)  
Tuning system  
W+1~W+94 (analog W+1~W+84), A-5~A-1, 5A  
Channel frequency synthesized tuning system  
Direct access number keyboard,  
Programmable scan, and Channel up / down  
Channel access  
Connectivity  
Component Video Input  
(Y/Pb/Pr)  
1
supporting video signals : 480i/p, 720p, 1080i 60Hz  
Composite Video Input  
(shared Y green terminal with  
Component Video)  
1
3
supporting video signals :  
480i/p, 720p, 1080i @60Hz, 1080p @24/30/60Hz  
PC-Input signal up to FHD (1920 x 1080)  
supporting video signals :  
480i/p, 720p, 1080i @60Hz, 1080p @24/30/60Hz  
PC-Input signal up to WXGA (1360 x 768)  
HDMI Input  
Audio L/R Input  
PC Input  
USB  
1
via VGA, HDMI and HDMI-DVI + Analog Audio L/R  
1
1
Digital Audio Output  
Headphone Output  
supporting Dolby Digital  
1
1/8 inch (3.5mm)  
Power  
Power requirements  
120V~ AC +/10%, 60Hz +/0.5%  
Tem perature  
Operating temperature  
41 °F (5 °C) to 104 °F (40 °C)  
Specifications are subject to change without prior notice.  
English  
38  
10 Warranty  
PHILIPS LIMITED WARRANTY  
ONE (1) YEAR  
WARRANTY COVERAGE:  
PHILIPS warranty obligation is limited to the terms set forth  
below.  
Philips, or (d) if any Philips serial number has been removed or  
defaced, or (e) product, accessories or consumables sold “AS IS”  
without warranty of any kind by including refurbished Philips  
product sold “AS IS” by some retailers.  
WHO IS COVERED:  
Philips warrants the product to the original purchaser or the per- This Limited Warranty does not cover:  
son receiving the product as a gift against defects in materials and • Shipping charges to return defective product to Philips.  
workmanship as based on the date of original purchase  
(“Warranty Period”) from an Authorized Dealer. The original  
sales receipt showing the product name and the purchase date  
from an authorized retailer is considered such proof.  
• Labor charges for installation or setup of the product, adjust-  
ment of customer controls on the product, and installation or  
repair of antenna/signal source systems outside of the product.  
• Product repair and/or part replacement because of improper  
installation or maintenance, connections to improper voltage  
supply, power line surge, lightning damage, retained images or  
screen markings resulting from viewing fixed stationary con-  
tent for extended periods, product cosmetic appearance items  
due to normal wear and tear, unauthorized repair or other  
cause not within the control of Philips.  
• Damage or claims for products not being available for use, or  
for lost data or lost software.  
• Damage from mishandled shipments or transit accidents when  
returning product to Philips.  
• A product that requires modification or adaptation to enable  
it to operate in any country other than the country for which  
it was designed, manufactured, approved and/or authorized, or  
repair of products damaged by these modifications.  
• A product used for commercial or institutional purposes  
(including but not limited to rental purposes).  
• Product lost in shipment and no signature verification receipt  
can be provided.  
• Failure to operate per Owner’s Manual.  
WHAT IS COVERED:  
The Philips warranty covers new products if a defect in material  
or workmanship occurs and a valid claim is received by Philips  
within the Warranty Period. At its option, Philips will either (1)  
repair the product at no charge, using new or refurbished  
replacement parts, or (2) exchange the product with a product  
that is new or which has been manufactured from new, or ser-  
viceable used parts and is at least functionally equivalent or most  
comparable to the original product in Philips current inventory,  
or (3) refund the original purchase price of the product.  
Philips warrants replacement products or parts provided under  
this warranty against defects in materials and workmanship from  
the date of the replacement or repair for ninety (90) days or for  
the remaining portion of the original product’s warranty,  
whichever provides longer coverage for you. When a product or  
part is exchanged, any replacement item becomes your property  
and the replaced item becomes Philips’ property. When a refund  
is given, your product becomes Philips’ property.  
Note: Any product sold and identified as refurbished or  
renewed carries a ninety (90) day limited warranty.  
TO OBTAIN ASSISTANCE IN THE U.S.A., CANADA,  
PUERTO RICO, OR U.S. VIRGIN ISLANDS…  
Contact Philips Customer Care Center at:  
1-866-309-5962  
Replacement product can only be sent if all warranty  
requirements are met. Failure to follow all requirements  
can result in delay.  
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS  
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-  
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-  
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF  
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-  
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE  
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR  
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT  
IS LIMITED IN DURATION TO THE DURATION OF THIS  
WARRANTY.  
WHAT IS NOT COVERED - EXCLUSIONS AND  
LIMITATIONS:  
This Limited Warranty applies only to the new products manu-  
factured by or for Philips that can be identified by the trademark,  
trade name, or logo affixed to it. This Limited Warranty does not  
apply to any non-Philips hardware product or any software, even  
if packaged or sold with the product. Non-Philips manufacturers,  
suppliers, or publishers may provide a separate warranty for their  
own products packaged with the bundled product.  
Some states do not allow the exclusions or limitation of inciden-  
tal or consequential damages, or allow limitations on how long an  
implied warranty lasts, so the above limitations or exclusions may  
not apply to you.  
Philips is not liable for any damage to or loss of any programs,  
data, or other information stored on any media contained within  
the product, or any non-Philips product or part not covered by  
this warranty. Recovery or reinstallation of programs, data or  
other information is not covered under this Limited Warranty.  
This warranty does not apply (a) to damage caused by accident,  
abuse, misuse, neglect, misapplication, or non-Philips product, (b)  
to damage caused by service performed by anyone other than  
Philips or Philips Authorized Service Location, (c) to a product or  
a part that has been modified without the written permission of  
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.  
P&F USA, Inc. PO Box 2248, Alpharetta, GA 30023-2248  
P&F USA, Inc.  
PO Box 2248, Alpharetta, GA 30023-2248  
P&F Mexicana, S.A. de C.V.  
Av. La Palma No. 6, Col. San Fernando La Herradura.  
Huixquilucan, Edo. de México.  
C.P. 52787  
A3AU2UH / A3AQ2UH / A31P2UH / A3APAUH / A31T2UH / A3AF2UT / A31F2UT / A31M2UT / A31L2UT  
★★★★  
Philips and Philips Shield are used under license of  
Koninklijke Philips N.V.  

JVC AV 21U3 User Manual
KitchenAid KGCS166GBL2 User Manual
Lenovo 3000 V100 User Manual
LG Electronics LG Life Good Computer Monitor L204WTX User Manual
Moxa Technologies TCC 80I User Manual
NEC PD75P402 User Manual
Panasonic TX 29FX50 Series User Manual
Philips 200VW8 User Manual
Philips DVP4320WH User Manual
Philips MB4010T001 User Manual