Philips CD270 User Manual

Register your product and get support at  
CD270  
CD275  
EN User manual  
Enter text and number  
case  
20  
Compliance with EMF  
6
batteries  
22  
Delete a record  
9
Overview of the phone  
3 Get started  
What is standby mode?  
14  
8 Call log  
Return a call  
23  
4 Calls  
16  
10 Self-defined settings  
Personalize the sounds  
25  
Answer a second call  
11 Call features  
Auto conference  
Dial mode  
27  
28  
28  
Select the recall duration  
First ring  
ECO mode  
Make a call to another handset  
Transfer a call  
18  
18  
18  
Make a conference call  
EN  
3
12 Extra features  
Alarm clock  
29  
Unregister the handsets  
Network type  
30  
Set the sound quality of the message 34  
Remote access  
34  
15 Default settings  
36  
37  
38  
16 Technical data  
17 Frequently asked questions  
4
EN  
This equipment is not designed to make  
emergency calls when the power fails. An  
alternative has to be made available to allow  
emergency calls.  
1 Important safety  
instructions  
Do not expose the phone to excessive heat  
caused by heating equipment or direct sunlight.  
Do not drop your phone or allow objects to  
Power requirements  
fall on your phone.  
This product requires an electrical supply  
of 100-240 volts AC. In case of power  
failure, the communication can be lost.  
Do not use any cleaning agents containing  
alcohol, ammonia, benzene, or abrasives as  
these may harm the set.  
Do not use the product in places where there  
The voltage on the network is classified  
as TNV-3 (Telecommunication Network  
Voltages), as defined in the standard EN  
60950.  
are explosive hazards.  
Do not let small metal objects come into  
contact with the product. This can deteriorate  
audio quality and damage the product.  
Active mobile phones in the vicinity may cause  
interference.  
Warning  
Metallic objects may be retained if placed near  
The Electrical network is classified as  
hazardous. The only way to power down the  
charger is to unplug the power supply from  
the electrical outlet. Ensure that the electrical  
outlet is always easily accessible.  
or on the handset receiver.  
About operating and storage temperatures  
Operate in a place where temperature is  
always between 0°C to +35°C (32°F to  
95°F).  
To avoid damage or malfunction  
Caution  
Store in a place where temperature is  
always between -20°C and +45°C (-4° F  
to 113° F).  
Use only the power supply listed in the user  
instructions.  
Battery life may be shortened in low  
temperature conditions.  
Use only the batteries listed in the user  
instructions.  
Do not allow the charging contacts or the  
battery to come into contact with metal  
objects.  
Declaration of conformity  
Do not open the handset, base station or  
charger as you could be exposed to high  
voltages.  
Hereby Philips Consumer Lifestyle, P&A,  
declares that the CD270/CD275 is in  
compliance with the essential requirements and  
other relevant provisions of Directive 1999/5/  
EC.You can find the Declaration of Conformity  
Do not allow the charger to come into contact  
with liquids.  
Risk of explosion if battery is replaced by an  
incorrect type.  
Dispose of used batteries according to the  
instructions.  
This product has been designed, tested and  
manufactured according the European R&TTE  
directive 1999/5/EC. Following this directive,  
this product can be brought into service in the  
following countries:  
Always use the cables provided with the  
product.  
For pluggable equipment, the socket-outlet  
shall be installed near the equipment and shall  
be easily accessible.  
Handsfree activation could suddenly increase  
the volume in the earpiece to a very high level:  
make sure the handset is not too close to your  
ear.  
EN  
5
 
Philips is committed to develop, produce and  
market products that cause no adverse health  
effects. Philips confirms that if its products are  
handled properly for their intended use, they  
are safe to use according to scientific evidence  
available today.  
Philips plays an active role in the development  
of international EMF and safety standards,  
enabling Philips to anticipate further  
developments in standardization for early  
integration in its products.  
Use GAP standard  
compliance  
Disposal of your old product  
and batteries  
The GAP standard guarantees that all DECT™  
GAP handsets and base stations comply with  
a minimum operating standard irrespective of  
their make.The handset and base station are  
GAP compliant, which means they guarantee  
the minimum functions: register a handset,  
take the line, make a call and receive a call.The  
advanced features may not be available if you  
use them with other makes.To register and use  
this handset with a GAP compliant base station  
of different make, first follow the procedure  
described in the manufacturer’s instructions,  
then follow the procedure described in this  
manual for registering a handset.To register a  
handset from different make to the base station,  
put the base station in registration mode, then  
follow the procedure described in the handset  
manufacturer’s instructions.  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
When this crossed-out wheeled bin symbol is  
attached to a product it means that the product  
is covered by the European Directive 2002/96/  
EC. Please inform yourself about the local  
separate collection system for electrical and  
electronic products.  
Please act according to your local rules and  
do not dispose of your old products with your  
normal household waste.  
Compliance with EMF  
Correct disposal of your old product helps to  
prevent potential negative consequences for the  
environment and human health.  
Koninklijke Philips Electronics N.V. manufactures  
and sells many products targeted at consumers,  
which, like any electronic apparatus, in  
general have the ability to emit and receive  
electromagnetic signals.  
One of Philips’ leading Business Principles is to  
take all necessary health and safety measures  
for our products, to comply with all applicable  
legal requirements and to stay well within  
the EMF standards applicable at the time of  
producing the products.  
Your product contains batteries covered by the  
European Directive 2006/66/EC, which cannot  
be disposed with normal household waste.  
Please inform yourself about the local rules  
on separate collection of batteries because  
correct disposal helps to prevent negative  
6
EN  
 
consequences for the environmental and  
human health.  
When this logo is attached to a product, it  
means a financial contribution has been paid to  
the associated national recovery and recycling  
system.  
Environmental information  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene  
(bags, protective foam sheet.)  
Your system consists of materials which can  
be recycled and reused if disassembled by  
a specialized company. Please observe the  
local regulations regarding the disposal of  
packaging materials, exhausted batteries and old  
equipment.  
Your product contains batteries covered by the  
European Directive 2006/66/EC, which cannot  
be disposed of with normal household waste.  
Please inform yourself about the local rules on  
separate collection of batteries.The correct  
disposal of batteries helps prevent potentially  
negative consequences on the environment and  
human health.  
EN  
7
2 Your CD270/  
CD275  
Congratulations on your purchase and welcome  
to Philips!  
To fully benefit from the support that Philips  
com/welcome.  
What is in the box  
Handset**  
Base station with bracket (CD270)  
Charger**  
Power adapter**  
Base station with bracket (CD275)  
8
EN  
 
Overview of the phone  
Line cord*  
Guarantee  
User manual  
Quick start guide  
Note  
* In some countries, you have to connect the  
line adapter to the line cord, then plug the line  
cord to the telephone socket.  
Note  
** In multi-handset packs, there are additional  
handsets and chargers and power adapters.  
EN  
9
 
1
2
Earpiece  
13  
14  
15  
MENU  
Access the main  
menu.  
Make and receive  
calls.  
Select the function  
displayed on the  
handset screen  
directly above the  
key.  
Scroll up on the  
menu.  
• Confirm selection.  
Enter the options  
menu.  
3
4
16  
17  
Loudspeaker  
Battery door  
Increase the  
earpiece/speaker  
volume.  
Enter the call log.  
Scroll down on  
the menu.  
Overview of the base station  
Decrease the  
earpiece/speaker  
volume.  
CD270  
Enter the  
phonebook.  
5
End the call.  
Exit the menu/  
operation.  
Press and hold to  
turn the handset  
on/off.  
6
7
Turn the speaker  
on/off.  
Enter redial list  
and dial the recent  
number.  
REDIAL  
1
Find handsets.  
8
Press to enter a  
pause.  
Enter registration mode.  
Press and hold to  
turn the ringer  
on/off.  
CD275  
9
INT  
Make the intercom  
call.  
Make the  
conference call.  
10  
11  
Microphone  
Mute/unmute the  
microphone.  
12  
Press and hold  
to lock/unlock  
keypad.  
10 EN  
 
1
2
Loudspeaker  
/
Display icons  
Increase/decrease  
the speaker  
In standby mode, the icons shown on the main  
screen tell you what features are available on  
your handset.  
volume.  
Turn the answering  
machine on/off.  
3
4
5
Delete messages.  
Icon  
Descriptions  
/
Skip forward/  
backward during  
playback.  
When the handset is off the base  
station/charger, the bars indicate  
the battery level (full, medium  
and low).  
When the handset is on the base  
station/charger, the bars keep  
scrolling until charging completes.  
6
7
Play messages.  
Stop messages  
playback.  
Slow flashing at 1  
LED  
The empty battery icon flashes  
and you hear an alert tone.  
The battery is low and needs  
recharging.  
indicator  
second interval:  
Unread messages.  
Fast flashing at 0.5  
second interval:  
It displays the link status between  
the handset and base station. The  
more bars are shown, the better  
the signal strength is.  
The answering  
machine memory  
is full.  
Steady on:  
It displays the date.  
It displays the time.  
The alarm is activated.  
The ringer is off.  
The answering  
machine is on.  
Ongoing answering  
machine operation.  
Ongoing remote  
operation via the  
handset.  
Answering machine  
There is an unheard voice  
message.  
Scroll up for more options  
Scroll down for more options  
The ECO mode is activated.  
8
Find handsets  
Enter registration  
mode  
ECO  
EN 11  
 
3 Connect each end of the line cord to:  
3 Get started  
the telephone socket at the bottom of  
the base station;  
the telephone socket on the wall.  
Caution  
Ensure you have read the safety instructions in  
the “Important” section before you connect  
and install your handset.  
Connect the base station and  
charger  
Warning  
Risk of product damage! Ensure that the  
power supply voltage corresponds to the  
voltage printed on the back or the underside  
of the phone.  
Use only the supplied power adapter to charge  
the batteries.  
Note  
Install the handset  
If you subscribe to the digital subscriber line  
(DSL) high speed internet service through  
your telephone line, ensure you install a DSL  
filter between the telephone line cord and  
the power socket.. The filter prevents noise  
and caller ID problems caused by the DSL  
interference. For more information on the DSL  
filters, contact your DSL service provider.  
The type plate is located on the bottom of the  
base station.  
Caution  
Risk of explosion! Keep batteries away from  
heat, sunshine or fire. Never discard batteries  
in fire.  
Use only the supplied batteries.  
Risk of decreased battery life! Never mix  
different brands or types of batteries.  
1 Connect each end of the power adapter  
to:  
Note  
the DC input jack at the bottom of the  
base station;  
Charge the batteries for 16 hours before first  
use.  
the power socket on the wall.  
2 Connect each end of the power adapter  
Warning  
to (for multi handset packs):  
the DC input jack at the bottom of the  
extra handset charger.  
Check the battery polarity when inserting in  
the battery compartment. Incorrect polarity  
may damage the product.  
the power socket on the wall.  
12 EN  
a The batteries are pre-installed in the  
handset. Pull the battery tape off from  
the battery door before charging.  
Check the battery level  
The battery icon displays the current battery  
level.  
When the handset is off the base  
station/charger, the bars indicate  
the battery level (full, medium  
and low).  
When the handset is on the base  
station/charger, the bars keep  
scrolling until charging completes.  
The empty battery icon flashes.  
The battery is low and needs  
recharging.  
b Place the handset on the base station to  
charge the handset. When the handset  
is placed correctly on the base station,  
your hear a docking sound.  
» The handset starts charging.  
The handsets turn off if the battery is empty. If  
you are on the phone, you hear warning tones  
when the battery is almost empty.The call gets  
disconnected after the warning.  
Set the country  
To make the phone work, select your country.  
1 When you see the welcome message,  
press [OK].  
2 Select your country, press [OK] to  
confirm.  
» The country setting is saved.  
3 Set the date and time.  
» The phone is now ready to use.  
» To set the date and time later, press  
Note  
[BACK] to skip this setting.  
If the handset becomes warm when the  
batteries are being charged, it is normal.  
EN 13  
 
Set the date and time  
1 Press MENU.  
2 Select [CLOCK & ALARM] > [SET  
DATE/TIME], then press [OK] to  
confirm.  
Check the signal strength  
It displays the link status between  
the handset and base station. The  
more bars are shown, the better  
the signal strength is.  
3 Press the numeric buttons to enter the  
date, then press [OK] to confirm.  
» On the handset, the time set menu is  
displayed.  
Ensure the handset is linked to the base  
station before you make or receive calls  
and carry out the phone functions and  
features.  
If you hear warning tones when you are  
on the phone, the handset is almost out  
of battery or the handset is out of range.  
Charge the battery or move the handset  
nearer to the base station.  
4 Press the numeric buttons to enter the  
time.  
If the time is in 12-hour format, press  
to select [AM] or [PM].  
/
5 Press [OK] to confirm.  
Switch your handset On/Off  
Set the date and time format  
1 Press MENU.  
Press and hold  
handset. The handset’s screen turns off.  
to switch off the  
2 Select [CLOCK & ALARM] > [SET  
FORMAT], then press [OK] to confirm.  
Note  
3 Select [DATE FORMAT] or [TIME  
When the handset is switched off, no call can  
be received.  
FORMAT].  
4 Select the setting. Select [DD/MM][MM/  
DD] as the date display and [12 HOURS]  
or [24 HOURS] as the time display. Then  
press [OK] to confirm.  
Press and hold  
handset. It takes a few seconds for the  
handset to power up.  
to switch on the  
» The setting is saved.  
What is standby mode?  
Your phone is in standby mode when it is idle.  
The standby screen displays the handset name,  
handset number, date and time, signal icon, and  
battery icon.  
14 EN  
 
Redial the most recent number  
4 Calls  
1 Press  
.
2 Press REDIAL.  
3 Press [OK].  
Note  
» The most recent number is then dialed  
When the power fails, the phone cannot  
access emergency services.  
out.  
Call from the redial list  
Tip  
You can make a call from the redial list.  
Check the signal strength before you make  
a call or when you are in a call. For more  
information, see “Check the signal strength” in  
the Get started section.  
Tip  
For more information, see “Redial a call” in the  
Redial list section.  
Make a call  
Call from the phonebook  
You can make a call from the phonebook list.  
You can make a call in these ways:  
Quick call  
Tip  
Dial before you call  
For more information, see “Call from the  
phonebook” in the Phonebook section.  
Redial the most recent number  
Call from the redial list.  
Call from the phonebook list  
Call from the call log  
Call from the call log  
You can return a call from the outgoing,  
received or missed call log.  
Quick call  
1 Press  
.
Tip  
2 Dial the phone number.  
» The number is dialed out.  
For more information, see “Return a call” in  
the Call log section.  
» The duration of your current call is  
displayed.  
Note  
Dial before you call  
The call timer displays the talk time of your  
current call.  
1 Dial the phone number  
To erase a digit, press [BACK].  
To enter a pause, press and hold .  
Note  
2 Press  
to dial out the call.  
If you hear warning tones, the handset is  
almost out of battery or the handset is out  
of range. Charge the battery or move the  
handset nearer to the base station.  
EN 15  
 
End a call  
Mute the microphone  
You can end a call in these ways:  
1 Press during a call.  
Press  
; or  
» The handset displays [MUTE ON].  
Place the handset to the base station  
or charging cradle if the auto hang up  
is activated.  
» The caller cannot hear you, but you  
can still hear his voice.  
2 Press again to unmute the microphone.  
» You can now communicate with the  
caller.  
Answer a call  
When the phone rings, press  
answer the call.  
or to  
Turn the speaker on or off  
Warning  
Press  
.
When the handset rings or when the  
handsfree is activated, keep the handset away  
from your ear to avoid ear damage.  
Make a second call  
Note  
Note  
The caller ID service is available if you have  
registered to the caller ID service with your  
service provider.  
This service is network dependent.  
1 Press  
during a call.  
» The first call is put on hold.  
Tip  
When there is a missed call, the handset  
displays a notification message.  
2 Dial the second number.  
» The number displayed on the screen is  
dialed out.  
Turn off the ringer for all incoming  
calls  
Answer a second call  
There are two ways to turn off the ringer:  
1 Press and hold in standby mode.  
Note  
»
displays on the screen.  
This service is network dependent.  
2 When the phone rings, press  
.
When there is a periodical beep to notify you  
of an incoming call, you can answer the call in  
these ways:  
Adjust the earpiece volume  
1 Press  
and  
to answer the call.  
Press or to adjust the volume during a call.  
» The earpiece volume is adjusted and  
the phone is back to the call screen.  
» The first call is put on hold, and you  
are now connected to the second call.  
16 EN  
 
2 Press  
and  
to end the current call  
and answer the second call.  
Toggle between two calls  
You can toggle your calls in these ways:  
1 Press  
and  
; or  
2 Press [OK] and select [SWITCH  
CALLS], then press [OK] again to  
confirm.  
» The current call is put on hold, and you  
are now connected to the other call.  
Make a conference call  
Note  
This service is network dependent. Check with  
the service provider for additional charges.  
When you are connected to two calls, press  
[OK], select [CONFERENCE] and then press  
[OK] again to confirm.  
» The two calls are combined and a  
conference call is established.  
EN 17  
 
» Wait for the other side to answer your  
5 Intercom and  
conference calls  
call.  
Toggle between calls  
Press INT to switch between the outside call  
and the intercom call.  
An intercom call is a call to another handset  
that shares the same base station.A conference  
call involves a conversation among you, another  
handset user and the outside callers.  
Transfer a call  
1 Press INT during a call.  
Make a call to another  
handset  
2 Select a handset number, then press  
[OK] to confirm.  
3 Press  
when the other side answers  
Note  
your call.  
» The call is now transferred to the  
If the base station only has 2 registered  
handsets, press INT to make a call to another  
handset.  
selected handset.  
1 Press INT. The handsets available for  
Make a conference call  
intercom are displayed.  
2 Select a handset number, then press  
A 3-way conference call is a call between you,  
another handset user and the outside callers. It  
requires two handsets to share the same base  
station.  
[OK] to confirm.  
» The selected handset rings.  
3 Press  
on the selected handset.  
» The intercom is established.  
4 Press to cancel or end the intercom  
During an external call  
call.  
1 Press INT to initiate an internal call.  
» The handsets available for intercom are  
displayed.  
Note  
If the selected handset is occupied in a call, you  
hear a busy tone.  
» The external caller is put on hold.  
2 Select or enter a handset number, then  
press [OK] to confirm.  
» The selected handset rings.  
While you are on the phone  
3 Press  
on the selected handset.  
» The intercom is established.  
You can go from one handset to another  
during a call:  
4 Press and hold INT on your handset.  
» You are now on a 3-way conference  
call with the external call and the  
selected handset.  
1 Press INT.  
2 The current caller is put on hold.  
3 Select a handset number, then press  
[OK] to confirm.  
5 Press  
to end the conference call.  
18 EN  
 
Note  
Press  
to join an ongoing conference with  
another handset if [ADVANCED SET] >  
[CONFERENCE] is set to [ON].  
During the conference call  
1 Press INT to put the external call on hold  
and go back to the internal call.  
» The external call is put on hold.  
2 Press INT to toggle between the external  
and internal call.  
3 Press and hold INT to establish the  
conference call again.  
Note  
If a handset hangs up during the conference  
call, the other handset remains connected to  
the external call.  
EN 19  
Key  
0
Characters (Lower case)  
. 0 , / : ; “ ‘ ! ¡ ? ¿ * + - % \ ^  
~ |  
[Sp] 1 @ _ # = < > ( ) & € £  
$ ¥ [ ] { } ¤ § …  
6 Text and  
numbers  
1
2
3
4
5
6
7
8
9
a b c 2 à â Æ á ã â ä å ą ç ć č  
d e f 3 ď đ ė ĕ è é ê ë ę Δ Φ  
g h i 4 ğ í ì î ï l Γ  
j k l 5 Λ ł ĺ ľ  
m n o 6 ñ ň ń ó ô õ ö ő  
p q r s 7 ř ş š ś β Π Θ Σ  
You can enter text and numbers for handset  
name, phonebook records, and other menu  
items.  
Enter text and number  
t u v 8 ţ ť ù ú û ü ů  
ű
1 Press once or several times on the  
alphanumeric key to enter the selected  
character.  
w x y z 9 ý ž ź ż ø Ω Ξ Ψ  
Example to write “Paul”  
Press 7 once: P  
2 Press [BACK] to delete the character.  
Press  
right.  
/
to move the cursor left and  
Press 2 once: a  
Press 8 two times: u  
Press 5 three times: l  
Key  
0
Characters (Upper case)  
. 0 , / : ; “ ‘ ! ¡ ? ¿ * + - % |  
1
[Sp] 1 @ _ # = < > ( ) & £  
$ ¥ ¤ § ...  
Switch between uppercase  
and lower case  
2
A B C 2 Â Æ Á Ã Ă Ä Å Ą  
Ç Ć Č  
3
4
5
6
D E F 3 Ď Ð Ė Ě É Ê Ę Δ Φ  
G H I 4 Ğ Í Ì Î Ï İ Γ  
J K L 5 Λ Ł Ĺ Ľ  
M N O 6 Ñ Ň Ń Ó Ô Õ  
Ö Ő  
By default, the first letter of each word in a  
sentence is uppercase and the rest is lowercase.  
Press and hold to switch between the  
uppercase and lowercase letters.  
7
8
P Q R S 7 Ř Ş Š Ś β Π Θ Σ  
T U V 8 Ţ Ť Ù Ú Û Ü Ů  
Ű
9
W X Y Z 9 Ý Ž Ź Ż ſ Ø Ω  
Ξ Ψ  
20 EN  
 
» The first record that starts with this  
7 Phonebook  
character is displayed.  
This phone has a phonebook that stores up  
to 100 records.You can access the phonebook  
from the handset. Each record can have a name  
up to 14 characters long and a number up to  
24 digits long.  
Call from the phonebook  
1 Press or press MENU >  
[PHONEBOOK] > [LIST] to access the  
phonebook.  
2 Select a contact in the phonebook list.  
View the phonebook  
3 Press  
to make the call.  
Note  
You can view the phonebook on one handset  
Access the phonebook during  
a call  
only each time.  
1 Press or press MENU >  
[PHONEBOOK] > [LIST] to access the  
phonebook menu.  
1 Press [OK], select [PHONEBOOK] then  
press [OK] again to confirm.  
2 Select a contact and view the available  
2 Select the contact, then press [OK] to  
information.  
confirm.  
» The number can be viewed.  
Search a record  
Add a record  
You can search the phonebook records in these  
ways:  
Scroll the contacts list.  
Note  
Enter the first character of the contact.  
If your phonebook memory is full, the handset  
displays a notification message. Delete some  
records to add new ones.  
Scroll the contact list  
1 Press or press MENU >  
[PHONEBOOK] > [LIST] to access the  
phonebook menu.  
1 Press MENU.  
2 Select [PHONEBOOK] > [NEW  
ENTRY], then press [OK] to confirm.  
2 press and to scroll through the  
3 Enter the name then press [OK] to  
phonebook entries.  
confirm.  
4 Enter the number, then press [OK] to  
Enter the first character of a contact  
confirm.  
1 Press or press MENU >  
[PHONEBOOK] > [LIST] to access the  
phonebook list.  
Tip  
For more information on how to edit the  
name and number, see the section on Text  
and numbers.  
2 Press the alphanumerical key that  
corresponds to the character.  
EN 21  
 
Note  
Delete all records  
1 Press MENU.  
The phonebook only saves new number.  
2 Select [PHONEBOOK] > [DELETE  
ALL], press [OK] to confirm.  
» The handset displays a confirmation  
request.  
Tip  
Press and hold to insert a pause.  
3 Press [OK] to confirm.  
» Your new record is saved.  
» All records are deleted.  
Tip  
For more information on how to edit the  
numbers and name, see the section on Text  
and numbers.  
Direct access memory  
You have 2 direct access memories (Keys  
1 and 2).To dial the saved phone number  
automatically, press and hold on the keys in  
standby mode.  
Edit a record  
1 Press MENU.  
Depending on your country, Keys 1 and 2 are  
preset to [1_VOICEMAIL] (voice mail number)  
and [2_INFO SVC] (information service  
2 Select [PHONEBOOK] > [EDIT  
number) of your network operator respectively.  
ENTRY], then press [OK] to confirm.  
3 Select the contact, then press [OK] to  
confirm.  
Edit the direct access memory  
1 Press MENU > [PHONEBOOK] >  
[EDIT ENTRY], then press [OK] to  
confirm.  
4 Edit the name, then press [OK] to  
confirm.  
5 Edit the number, then press [OK] to  
» The 2 direct access memory records  
are displayed at the top of the contact  
list.  
confirm.  
» The record is saved.  
2 Select a direct memory access record.  
Delete a record  
1 Press MENU.  
3 Edit the name (except 1_ and 2_), then  
press [OK] to confirm.  
4 Edit the number, then press [OK] to  
confirm.  
2 Select [PHONEBOOK] > [DELETE],  
then press [OK] to confirm.  
» Your new record is saved.  
3 Select a contact, then press [OK] to  
confirm.  
» The handset displays a confirmation  
request.  
4 Press [OK] to confirm.  
» The record is deleted.  
22 EN  
 
6 Enter and edit the number, then press  
[OK] to confirm.  
8 Call log  
» The record is saved.  
The call log stores the call history of all missed  
or received calls.The incoming call history  
includes the name and number of the caller,  
call time and date.This feature is available if you  
have registered to the caller ID service with  
your service provider.  
Return a call  
1 Press .  
2 Select [CALL LIST], then press [OK].  
3 Select a record on the list.  
Your phone can store up to 20 call records. If  
the caller allows the display of his identity, you  
can view his name or number.The call records  
are displayed in chronological order with the  
most recent received call at the top of the list.  
4 Press  
to make the call.  
Delete a call record  
Note  
Ensure the number in the call list is valid before  
you can call back directly from the call list.  
1 Press .  
2 Select [CALL LIST], then press [OK] to  
confirm.  
3 The incoming call log is displayed.  
4 Select a record, then press [OK] to  
View the call records  
confirm.  
1 Press  
.
5 Select [DELETE], then press [OK] to  
confirm  
2 Select [CALL LIST], then press [OK] to  
» The handset displays a confirmation  
confirm.  
requests.  
» The incoming call log is displayed.  
6 Press [OK] to confirm.  
3 Select a record, then press [OK] to view  
» The record is deleted.  
the available information.  
Save a call record to the  
phonebook  
Delete all call records  
1 Press .  
1 Press .  
2 Select [CALL LIST], then press [OK] to  
confirm.  
2 Select [CALL LIST], then press [OK] to  
» The incoming call log is displayed.  
confirm.  
» The incoming call log is displayed.  
3 Press [OK] to enter the options menu.  
3 Select a record, then press [OK] to  
4 Select [DELETE ALL], then press [OK]  
confirm.  
to confirm.  
» The handset displays a confirmation  
request.  
4 Select [SAVE NUMBER], then press  
[OK] to confirm.  
5 Enter and edit the name, then press [OK]  
5 Press [OK] to confirm.  
to confirm.  
» All records are deleted.  
EN 23  
 
Delete a redial record  
9 Redial list  
1 Press REDIAL to enter the list of dialed  
calls.  
2 Select a record, then press [OK] to  
The redial list stores the call history of dialed  
calls. It includes the names and/or numbers you  
have called.This phone can store up to 5 redial  
records.  
confirm.  
3 Select [DELETE], then press [OK] to  
confirm.  
» The handset displays a confirmation  
request.  
View the redial records  
4 Press [OK] to confirm.  
» The record is deleted.  
1 Press REDIAL to enter the list of dialed  
calls.  
2 Select a record then press [OK] to  
Delete all redial records  
confirm.  
1 Press REDIAL to enter the list of dialed  
3 Select [VIEW] to view the available  
calls.  
information.  
2 Press [OK] to enter the options menu.  
3 Select [DELETE ALL], then press [OK]  
Redial a call  
to confirm.  
1 Press REDIAL.  
4
The handset displays a confirmation  
request.  
2 Select the record you want to call. Press  
.
5 Press [OK] to confirm.  
» The number is dialed out.  
» All records are deleted.  
Save a redial record to the  
phonebook  
1 Press REDIAL to enter the list of dialed  
calls.  
2 Select a record, then press [OK] to  
confirm.  
3 Select [SAVE NUMBER], then press  
[OK] to confirm.  
4 Enter and edit the name, then press [OK]  
to confirm.  
5 Enter and edit the number, then press  
[OK] to confirm.  
» The record is saved.  
24 EN  
 
10 Self-defined  
settings  
Personalize the sounds  
Set the handset’s ringtone  
You can select from 10 ringtones.  
Customize the settings to make it your own  
phone.  
1 Press MENU.  
2 Select [PERSONAL SET] > [HANDSET  
TONES] > [RING TONES], then press  
[OK] to confirm.  
Personalize the phone display  
3 Select a ringtone, then press [OK] to  
confirm.  
» The setting is saved.  
Name the handset  
The name of the handset can be up to 12  
characters. It is displayed on the handset  
screen in standby mode.  
Set the handset’s ringtone volume  
You can select among 5 ringtone volume  
levels or [OFF].  
1 Press MENU.  
2 Select [PERSONAL SET] > [HANDSET  
1 Press MENU.  
NAME], then press [OK] to confirm.  
2 Select [PERSONAL SET] > [HANDSET  
TONES] > [RING VOLUME], then press  
[OK] to confirm.  
3 Enter or edit the name. To erase a  
character, press [BACK].  
4 Press [OK] to confirm.  
3 Select a volume level, then press [OK] to  
» The setting is saved.  
confirm.  
» The setting is saved.  
Set the display language  
Tip  
Note  
To turn off the ringtone, press and hold in  
standby mode. Then displays on the screen.  
This feature only applies to models with  
multiple-language support.  
Languages available for selection vary with  
different countries.  
Set the key tone  
Key tone is the sound made when you press a  
key on the handset.  
1 Press MENU.  
2 Select [PERSONAL SET] >  
[LANGUAGE], then press [OK] to  
confirm.  
1 Press MENU.  
2 Select [PERSONAL SET] > [HANDSET  
TONES] > [KEY BEEP], then press [OK]  
to confirm.  
3 Select a language, then press [OK] to  
confirm.  
» The setting is saved.  
3 Select [ON]/[OFF], then press [OK] to  
confirm.  
» The setting is saved.  
EN 25  
 
Enhance the audio quality  
XHD (Extreme High Definition) sound  
mode is an exclusive feature which transmits  
high fidelity signals to the handset. It makes  
the phone conversations sound like real-life  
conversations.  
When you are in standby mode,  
1 Press MENU.  
2 Select [ADVANCED SET] > [XHD  
SOUND], then press [OK] to confirm.  
3 Select the new setting, then press [OK]  
to confirm.  
» The setting is saved.  
When you are in a call,  
1 Press [OK] to enter the options menu.  
2 Change the XHD setting.  
3 Press [OK] to confirm  
» The setting is saved.  
26 EN  
11 Call features  
Dial mode  
Note  
The phone supports a number of call-related  
features that help you handle and manage the  
calls.  
This feature only applies to models that  
support both tone and pulse dial.  
Dial mode is the telephone signal used in your  
country.The phone supports tone (DTMF) and  
pulse (rotary) dial. Consult the service provider  
for detailed information.  
Auto hang up  
To end a call, simply place the handset on the  
base station or charge cradle.  
Set the dial mode  
1 Press MENU.  
Activate/Deactivate auto hang up  
2 Select [ADVANCED SET] > [DIAL  
1 Press MENU.  
MODE], then press [OK] to confirm.  
2 Select [PERSONAL SET] > [AUTO  
3 Select a dial mode, then press [OK] to  
HANG-UP], then press [OK] to confirm.  
confirm.  
3 Select [ON]/[OFF], then press [OK] to  
» The setting is saved.  
confirm.  
» The setting is saved.  
Note  
Note  
If your phone is in pulse dial mode, press  
during a call for temporary tone mode. ‘d’  
displays. Digits entered for this call are then  
sent out as tone signals.  
When the auto hang up is off, the speaker is  
on automatically.  
Auto conference  
Select the recall duration  
To join an external call with another handset,  
Ensure that the recall time is set correctly  
before you can answer a second call. In normal  
case, the phone is already preset for the recall  
duration.You can select among 3 options:  
[SHORT], [MEDIUM] and [LONG].The  
number of available options varies with different  
countries. For details, consult your service  
provider.  
press  
.
Activate/Deactivate auto conference  
1 Press MENU.  
2 Select [ADVANCED SET] >  
[CONFERENCE], then press [OK] to  
confirm.  
Set the recall duration  
3 Select [ON]/[OFF], then press [OK] to  
confirm.  
1 Press MENU.  
» The setting is saved.  
2 Select [ADVANCED SET] > [RECALL  
TIME], then press [OK] to confirm.  
3 Select an option, then press [OK] to  
confirm.  
EN 27  
 
Note  
» The setting is saved.  
When ECO is activated, the connection range  
between the handset and the base station can  
be reduced.  
First ring  
If you have subscribed to the caller ID service  
with your service provider, your phone can  
suppress the first ring before the caller ID  
displays on the screen.After the phone is  
reset, it can detect automatically if the caller ID  
service is subscribed and start to suppress the  
first ring.You can change this setting to suit your  
preference.This feature only applies to models  
with first ring support.  
Turn the first ring on/off  
1 Press MENU.  
2 Select [ADVANCED SET] > [FIRST  
RING], then press [OK] to confirm.  
3 Select [ON]/[OFF], press [OK] to  
confirm.  
» The setting is saved.  
Note  
To reset the first ring status, go to the reset  
menu.  
ECO mode  
The ECO mode reduces the transmission  
power of the handset and base station.  
1 Press MENU.  
2 Select [ADVANCED SET] > [ECO], then  
press [OK] to confirm.  
3 Select [ON]/[OFF], then press [OK] to  
confirm.  
» The setting is saved.  
» ECO is displayed.  
28 EN  
 
12 Extra features  
Keypad lock  
You to lock the keypad to prevent accidental  
button presses.  
Your phone offers you extra features which  
keep you organized and informed while on the  
move.  
Lock the keypad  
1 Press and hold in standby mode.  
» The keypad is locked.  
Alarm clock  
Note  
Your phone has a built-in alarm clock. Check the  
information below to set your alarm clock.  
When the keypad is locked, no call can be  
made. You can still answer the incoming calls.  
The keypad is unlocked during the call but is  
locked automatically after you finish the call.  
Set the alarm  
1 Press MENU.  
2 Select [CLOCK & ALARM] > [ALARM],  
Unlock the keypad  
then press [OK] to confirm.  
1 Press and hold  
.
3 Select [ON], then press [OK] to confirm.  
» The keypad is unlocked.  
4 Press the numeric buttons to enter the  
time, then press [OK] to confirm.  
» The alarm is set and  
is displayed  
on the screen.  
Locate the handset  
Tip  
1 Press  
on the base station.  
» All handsets connected to this base  
Press  
/
to switch between [AM]/[PM] .  
station ring.  
2 Press  
on the base station again to  
stop ringing.  
Turn off the alarm  
» All handsets stop ringing; or  
3 Press any key on one handset to stop  
When the alarm rings  
ringing.  
1 Press any key to turn off the alarm.  
Before the alarm rings  
1 Press MENU.  
2 Select [CLOCK & ALARM] > [ALARM],  
then press [OK] to confirm.  
3 Select [OFF], then press [OK] to  
confirm.  
» The setting is saved.  
EN 29  
 
13 Advanced settings  
Unregister the handsets  
1 If two handsets share the same base  
station, you can unregister a handset with  
another handset.  
Register the handsets  
2 Press MENU.  
You can register additional handsets to the base  
station.The base station can register up to 5  
handsets.  
3 Select [ADVANCED SET] >  
[UNREGISTER], then press [OK] to  
confirm.  
4 Select the handset number to be  
Auto registration  
unregistered.  
1 Place the handset on the base station.  
» The handset detects the base station  
and start to register automatically.  
5 Press [OK] to confirm.  
» The handset is unregistered.  
Tip  
» Registration is completed in less than 2  
minutes.The base station automatically  
assigns a handset number to the handset.  
The handset number displays beside the  
handset name in standby mode.  
Manual registration  
If auto registration fails, register your handset  
manually to the base station.  
Restore default settings  
You can reset your phone settings to the  
original factory settings.  
1 Press MENU on the handset.  
2 Select [ADVANCED SET] >  
1 Press MENU.  
[REGISTER], then press [OK] to confirm.  
2 Select [ADVANCED SET] > [RESET],  
then press [OK] to confirm.  
» The handset displays a confirmation  
request.  
3 Press and hold  
on the base station for 5  
seconds until you hear a confirmation beep.  
4 Enter the system PIN. Press [BACK] to  
3 Press [OK] to confirm.  
make corrections.  
» All settings are reset.  
5 Press [OK] to confirm the PIN.  
» Registration is completed in less than 2  
minutes.The base automatically assigns  
a handset number to the handset.  
» The welcome screen displays.  
Tip  
For more information about the default  
settings, see the section on Default settings.  
Note  
If the PIN is incorrect or no base is found  
within a certain period, your handset displays  
a notification message. Repeat the above  
procedure if registration fails.  
Network type  
Note  
Note  
This feature only applies to models with  
network type support.  
The preset PIN is 0000. No change can be  
made on it.  
1 Press MENU.  
2 Select [ADVANCED SET] >  
[NETWORK TYPE], then press [OK].  
3 Select a network type, then press [OK].  
» The setting is saved.  
30 EN  
 
14 Telephone  
answering  
machine  
Set the answering machine  
language  
Note  
This feature only applies to models with  
multiple-language support.  
Note  
The answering machine language is the language  
for the announcements.  
Available only for CD275.  
1 Press MENU.  
Your phone includes a telephone answering  
machine that records unanswered calls when  
it is on. By default, the answering machine is  
set to the [ANSWER & REC.] mode.You can  
also access the answering machine remotely  
and change the settings through the answering  
machine menu on the handset.  
2 Select [ANSWER MACHINE] >  
[SETTINGS] > [VOICE LANGUAGE].  
3 Press [OK] to confirm.  
4 Select a language, then press [OK] to  
confirm.  
» The setting is saved.  
The LED indicator on the base station lights up  
when the answer machine is on.  
Set the answer mode  
Turn on/off the answering  
machine  
You can set the answering machine and  
select if the callers can leave messages. Select  
[ANSWER & REC.] if you allow the callers to  
leave messages. Select [ANSWER ONLY] if you  
forbid the callers to leave messages.  
You can turn on/off the answering machine  
through the base station or the handset.  
1 Press MENU.  
Through the handset  
1 Press MENU.  
2 Select [ANSWER MACHINE] >  
[ANSWER ON/OFF], then press [OK]  
to confirm.  
2 Select [ANSWER MACHINE] >  
[ANSWER MODE], then press [OK] to  
confirm.  
3 Select an answer mode, then press [OK]  
to confirm.  
» The setting is saved.  
3 Select [ON]/[OFF], then press [OK] to  
confirm.  
Note  
» The setting is saved.  
If the memory is full, the answering machine  
switches to [ANSWER ONLY] mode  
automatically.  
Through the base  
1 Press to turn on/off the answering  
machine in standby mode.  
Note  
When the answering machine is switched on, it  
answers incoming calls after a certain number  
of rings based on the ring delay setting.  
EN 31  
 
4 Select [PLAY], then press [OK] to  
confirm.  
Announcements  
» You can listen to the current  
announcement.  
The announcement is the message your caller  
hears when the answering machine picks up the  
call.The answering machine has 2 pre-recorded  
announcements: the [ANSWER & REC.] mode  
and [ANSWER ONLY] mode.  
Note  
You can no longer listen to the announcement  
when you pick up an incoming call.  
Record an announcement  
The maximum length of the announcement  
you can record is 3 minutes. The newly  
recorded announcement automatically  
replaces the old one.  
Delete an announcement  
1 Press MENU.  
2 Select [ANSWER MACHINE] >  
[ANNOUNCEMENT], then press [OK]  
to confirm.  
1 Press MENU.  
2 Select [ANSWER MACHINE] >  
[ANNOUNCEMENT], then press [OK]  
to confirm.  
3 Select [ANSWER & REC.] or [ANSWER  
ONLY], then press [OK] to confirm.  
4 Select [DELETE], then press [OK] to  
3 Select [ANSWER & REC.] or [ANSWER  
confirm.  
ONLY], then press [OK] to confirm.  
» The handset displays a confirmation  
4 Select [RECORD], then press [OK] to  
request.  
confirm.  
5 Press [OK] to confirm.  
5 Recording starts after the beep.  
6 The pre-recorded announcement is  
6 Press [OK] to stop recording or the  
restored.  
recording stops after 3 minutes.  
» You can listen to the newly recorded  
announcement on the handset.  
Note  
No pre-recorded announcement can be  
deleted.  
Note  
To restore the pre-recorded announcement,  
delete your current announcement.  
Incoming messages (ICM)  
Note  
Each message can be up to 3 minutes long.  
When you receive new messages, the new  
message indicator flashes on the answering  
machine and the handset displays a notification  
message.  
Ensure that you speak close to the microphone  
when you record an announcement.  
Listen to the announcement  
Note  
1 Press MENU.  
2 Select [ANSWER MACHINE] >  
[ANNOUNCEMENT], then press [OK]  
to confirm.  
If you pick up the phone when the caller leaves  
a message, the recording stops and you can  
talk to the caller directly.  
3 Select [ANSWER & REC.] or [ANSWER  
ONLY], then press [OK] to confirm.  
32 EN  
 
Delete an incoming message  
From the base  
Note  
If the memory is full, the answering machine  
switches to [ANSWER ONLY] automatically.  
Delete old messages to receive new ones.  
1 Press when you listen to the message.  
» The current message is deleted.  
Listen to the incoming messages  
From the handset  
You can listen to the incoming messages in the  
sequence they are recorded.  
1 When you listen to the message, press  
[OK] to enter the options menu.  
2 Select [DELETE], then press [OK] to  
From the base  
confirm.  
Start/Stop listening: Press  
Adjust the volume: Press  
Skip backward:  
- When you listen to the messages, press  
to listen to the message from the  
beginning.  
.
» The current message is deleted.  
/
.
Delete all old incoming messages  
From the base  
1 Press and hold in standby mode.  
» All old messages are permanently  
deleted.  
- During the first second of the current  
message, press to listen to the  
previous message.  
Skip forward: Press to skip to the next  
message.  
Delete the current message: Press  
.
From the handset  
Note  
1 Press MENU on the handset.  
2 Select [ANSWER MACHINE] >  
[DELETE ALL], then press [OK] to  
confirm.  
No deleted messages can be recovered.  
» The handset displays a confirmation  
request.  
From the handset  
1 Press MENU.  
3 Press [OK] to confirm.  
» All old messages are permanently  
deleted.  
2 Select [ANSWER MACHINE] > [PLAY],  
then press [OK] to confirm.  
» New messages start playing. Old  
messages start playing if there is no  
new message.  
Note  
You can delete the read messages only. No  
deleted messages can be recovered.  
Press [BACK] to stop listening.  
Press [OK] to enter the options menu.  
Press  
/
to increase/decrease the  
volume.  
EN 33  
Tip  
Call screening  
When you access the answering machine  
remotely, you are recommended to set the  
ring delay to [ECONOMY] mode. This is a  
cost effective way to manage your messages.  
When there are new messages, the answering  
machine picks up the call after 3 rings; When  
there is no messages, it picks up the call after  
5 rings.  
You can hear the caller while he is leaving a  
message. Press  
to pick up the call.  
From the base  
Press  
/
to adjust the speaker volume  
during call screening. The lowest volume level  
turns off the call screening.  
Remote access  
Set the sound quality of the  
message  
You can operate your answering machine when  
you are away from home. Simply make a call to  
your phone with a touch tone phone and enter  
your 4-digit PIN code.  
You can adjust the sound quality of the  
messages received from the answering machine.  
Note  
1 Press MENU.  
The remote access PIN code is the same as  
your system PIN. The preset PIN is 0000.  
2 Select [ANSWER MACHINE] >  
[SETTINGS] > [MSG QUALITY], then  
press [OK] to confirm.  
3 Select the new setting, then press [OK]  
Change the PIN code  
to confirm.  
» The setting is saved.  
1 Press MENU.  
2 Select [ANSWER MACHINE] >  
[SETTINGS] > [REMOTE ACCESS] >  
[CHANGE PIN], then press [OK] to  
confirm.  
Set the ring delay  
3 Enter the old PIN, then press [OK] to  
You can set the number of times the phone  
rings before the answering machine picks up  
the call.  
confirm.  
4 Enter the new PIN code, then press [OK]  
to confirm.  
1 Press MENU.  
5 Enter the new PIN code again, then press  
2 Select [ANSWER MACHINE] >  
[SETTINGS] > [RING DELAY], then  
press [OK] to confirm.  
[OK] to confirm.  
» The setting is saved.  
3 Select a new setting, then press [OK] to  
confirm.  
» The setting is saved.  
Note  
Ensure that the answering machine is switched  
on before this feature can be applied.  
34 EN  
 
Activate/deactivate the remote access  
Remote access commands  
You can allow or block remote access to the  
answering machine.  
Key  
Function  
1
Repeat the current or listen to  
the previous message.  
Listen to messages.  
Skip to the next message.  
Delete the current message.  
Switch the answering machine  
on.  
1 Press MENU.  
2
3
6
7
2 Select [ANSWER MACHINE] >  
[SETTINGS] > [REMOTE ACCESS],  
then press [OK] to confirm.  
3 Select a new setting, then press [OK] to  
confirm.  
(not available when you listen to  
the messages).  
» The setting is saved.  
8
9
Stop listening to the message.  
Switch the answering machine  
off.  
(not available when you listen to  
the messages).  
Access the answering machine  
remotely  
1 Make a call to your home number with a  
touch tone phone.  
2 Enter # when you hear the  
announcement.  
3 Enter your PIN code.  
» You now have access to your  
answering machine, and you can now  
listen to the new messages.  
Note  
You have 2 chances to enter the correct PIN  
code before your phone hangs up.  
4 Press a key to carry out a function. See  
the Remote access commands table  
below for a list of available functions.  
Note  
When there is no message, the phone hangs  
up automatically if no key is pressed for 8  
seconds.  
EN 35  
15 Default settings  
Language*  
Handset name  
Date  
Country dependent  
PHILIPS  
01/01/10  
Date format*  
Time*  
Time format*  
Alarm  
Country dependent  
Country dependent  
Country dependent  
Off  
Phonebook list  
Auto hang up  
Recall time*  
First ring*  
Conference  
Dial mode*  
Unchanged  
On  
Country dependent  
Country dependent  
Off  
Tone  
Handset ring melody* Country dependent  
Receiver volume Volume 3  
Handset ring volume Level 3  
Handset key beep  
XHD sound  
On  
On  
Incoming call log  
Redial list  
Empty  
Empty  
Answering Machine  
Ans machine status  
Ans machine mode  
Base call screening  
On  
[ANSWER & REC.]  
On  
Announcement  
memory  
Pre-recorded  
announcement  
Incoming message  
memory  
Empty  
Remote access  
PIN code  
Off  
0000  
Voice language  
Ring delay  
Country dependent  
5 rings  
Speaker volume  
Level 3  
Note  
*Country dependent features  
36 EN  
 
Weight and dimensions (CD275)  
16 Technical data  
Handset: 125.6 grams  
46.1 x 164.5 x 27.7 mm (W x H x D)  
Base: 125.5 grams  
Display  
108.4 x 79.5 x 102.0 mm (W x H x D)  
Charger: 49 grams  
Amber LCD backlight  
General telephone features  
73.1 x 78.6 x 89.0 mm (W x H x D)  
Dual mode caller name & number  
identification  
Temperature range  
Operation: 0°C to +35°C (32°F to 95°F)  
Storage: -20°C to +45°C (-4°F to 113°F)  
Conference call and voicemails  
Intercom  
Relative humidity  
Maximum talk time: 12 hours  
Operation: Up to 95% at 40°C  
Storage: Up to 95% at 40°C  
Phonebook list, Redial list and Call log  
Phonebook list with 100 entries  
Redial list with 5 entries  
Call log with 20 entries  
Battery  
CORUN: Ni-MH AAA 1.2V 550mAh  
BYD: Ni-MH AAA 1.2V 550mAh  
Adapter  
Base and charger  
Salom, SSW-1920EU-2, Input: 100-240V  
50/60Hz 0.2A, Output: 6V 500mA  
Salom, SSW-1920UK-2, Input: 100-240V  
50/60Hz 0.2A, Output: 6V 500mA  
ESL, IA5060G Input: 100-240V 50/60Hz  
0.2A, Output: 6V 500mA  
ESL, PI5060G Input: 100-240V 50/60Hz  
0.2A, Output: 6V 500mA  
ESL, PI5060B Input: 100-240V 50/60Hz  
0.2A, Output: 6V 500mA  
Power consumption  
Power consumption at standby mode:  
around 0.60W (CD270); 0.65W (CD275)  
Weight and dimensions (CD270)  
Handset: 125.6 grams  
46.1 x 164.5 x 27.5 mm (W x H x D)  
Base: 97 grams  
108.4 x 79.5 x 102.0 mm (W x H x D)  
Charger: 49 grams  
73.1 x 78.6 x 89.0 mm (W x H x D)  
EN 37  
Bad audio (crackles, echo, etc.)  
17 Frequently  
The handset is nearly out of range. Move  
it closer to the base station.  
The phone receives interference from  
the nearby electrical appliances. Move the  
base station away from them.  
asked questions  
The phone is at a location with thick  
walls. Move the base away from them.  
The handset does not ring.  
If the handset displays  
[UNREGISTERED], register the handset.  
Ensure the handset ringtone is turned on.  
The caller ID does not display.  
The service is not activated. Check with  
your service provider.  
Tip  
The caller’s information is withheld or  
unavailable.  
For more information, see “Register the  
handsets” on the Advanced settings section.  
When I see [WAITING…] on the screen,  
what is happening with the phone?  
If I fail to register the additional handsets to  
the base station, what do I do?  
The phone is recalling the memory of the  
phonebook and call log. Both information are  
stored in the base station.Then the handset  
retrieves the data from the base station after  
Your base memory is full. Unregister the unused  
handsets and try again.  
No dialing tone  
a few seconds.When you press  
/
the call  
Check your phone connections.  
The handset is out of range. Move it  
closer to the base station.  
log/phonebook information is displayed on the  
handset.  
The handset loses connection with the base  
or the sound is distorted during a call.  
Check if the ECO mode is activated. Turn it  
off to increase the handset range and enjoy  
the optimal call conditions.  
No docking tone  
The handset is not placed properly on the  
base station/charger.  
The charging contacts are dirty.  
Disconnect the power supply first and  
clean the contacts with a damp cloth.  
Note  
I cannot change the settings of my voice mail,  
what do I do?  
The voice mail service is managed by your  
service provider but not the phone itself.  
Contact your service provider to change the  
settings.  
If the above solutions do not help, disconnect  
the power supply from both the handset and  
base station. Try again after 1 minute.  
The handset on the charger does not charge.  
Ensure the batteries are inserted  
correctly.  
Ensure the handset is placed properly on  
the charger. The battery icon animates  
when charging.  
Batteries are defective. Purchase new  
ones from your dealer.  
No display  
Ensure the batteries are charged.  
Ensure there are power and phone  
connections.  
38 EN  
 
ANNEX 1  
English  
Finnish  
Dutch  
Hereby, Philips Consumer Lifestyle, BU P&A, declares that this equipment is in  
compliance with the essential requirements and other relevant provisions of Directive  
1999/5/EC.  
Philips Consumer Lifestyle, BU P&A vakuuttaa täten että tämä laite on direktiivin  
1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.  
Hierbij verklaart, Philips Consumer Lifestyle, BU P&A dat het toestel in  
overeenstemming is met de essentiële eisen en de andere relevante bepalingen van  
richtlijn 1999/5/EG.  
French  
Par la présente, Philips Consumer Lifestyle, BU P&A, déclare que cet appareil est  
conforme aux exigences essentielles et aux autres dispositions pertinentes de la  
directive 1999/5/CE.  
Swedish  
Härmed intygar, Philips Consumer Lifestyle, BU P&A, att denna utrustning står i  
överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser  
som framgår av direktiv 1999/5/EG.  
Danish  
German  
Greek  
Undertegnede Philips Consumer Lifestyle, BU P&A erklærer herved, at følgende udstyr  
overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.  
Hiermit erklärt Philips Consumer Lifestyle, BU P&A die Übereinstimmung des Produkts  
mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der  
Richtlinie 1999/5/EG.  
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ η Philips Consumer Lifestyle, BU P&A ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟΣ  
Ο ΕΞΟΠΛΙΣΜΟΣ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ  
ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.  
Italian  
Con la presente Philips Consumer Lifestyle, BU P&A dichiara che questo apparecchio  
è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla  
direttiva 1999/5/CE.  
Spanish  
Por medio de la presente, Philips Consumer Lifestyle, BU P&A, declara que el equipo  
cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o  
exigibles de la Directiva 1999/5/CE.  
Portuguese Philips Consumer Lifestyle, BU P&A, declara que este equipamento está conforme com  
os requisitos essenciais e outras disposições da Directiva 1999/5/CE.  
Property of Philips Consumer Lifestyle  
0168  
© 2009 Koninklijke Philips Electronics N.V.  
All rights reserved.  
Printed in China  
IFU_CD270-275_05_EN_V1.2  

Indesit KD6G25SXIR User Manual
Intel MI910 User Manual
Jenn Air W10204447A User Manual
JVC 0506TKH VT VT User Manual
Lenovo ThinkCentre 7354 User Manual
Marshall electronic V R901DP AFHD User Manual
Moffat G514B B User Manual
Philips 28PW9536 User Manual
Philips Computer Monitor 2 47E+06 User Manual
Philips PS1132C User Manual